net: dsa: use dsa_is_user_port everywhere

Most of the DSA code still check ds->enabled_port_mask directly to
inspect a given port type instead of using the provided dsa_is_user_port
helper. Change this.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 2574a52ee161ca97a388aba2293a2754e1663d4d..7f47400e557e522dcf64eae9c64cf74983bfab62 100644 (file)
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -652,8 +652,7 @@ static int bcm_sf2_sw_suspend(struct dsa_switch *ds)
         * bcm_sf2_sw_setup
         */
        for (port = 0; port < DSA_MAX_PORTS; port++) {
-               if ((1 << port) & ds->enabled_port_mask ||
-                   dsa_is_cpu_port(ds, port))
+               if (dsa_is_user_port(ds, port) || dsa_is_cpu_port(ds, port))
                        bcm_sf2_port_disable(ds, port, NULL);
        }
 
@@ -676,7 +675,7 @@ static int bcm_sf2_sw_resume(struct dsa_switch *ds)
                bcm_sf2_gphy_enable_set(ds, true);
 
        for (port = 0; port < DSA_MAX_PORTS; port++) {
-               if ((1 << port) & ds->enabled_port_mask)
+               if (dsa_is_user_port(ds, port))
                        bcm_sf2_port_setup(ds, port, NULL);
                else if (dsa_is_cpu_port(ds, port))
                        bcm_sf2_imp_setup(ds, port);
@@ -771,7 +770,7 @@ static void bcm_sf2_sw_configure_vlan(struct dsa_switch *ds)
        bcm_sf2_vlan_op(priv, ARLA_VTBL_CMD_CLEAR);
 
        for (port = 0; port < priv->hw_params.num_ports; port++) {
-               if (!((1 << port) & ds->enabled_port_mask))
+               if (!dsa_is_user_port(ds, port))
                        continue;
 
                core_writel(priv, 1, CORE_DEFAULT_1Q_TAG_P(port));
@@ -786,7 +785,7 @@ static int bcm_sf2_sw_setup(struct dsa_switch *ds)
        /* Enable all valid ports and disable those unused */
        for (port = 0; port < priv->hw_params.num_ports; port++) {
                /* IMP port receives special treatment */
-               if ((1 << port) & ds->enabled_port_mask)
+               if (dsa_is_user_port(ds, port))
                        bcm_sf2_port_setup(ds, port, NULL);
                else if (dsa_is_cpu_port(ds, port))
                        bcm_sf2_imp_setup(ds, port);

diff --git a/drivers/net/dsa/bcm_sf2_cfp.c b/drivers/net/dsa/bcm_sf2_cfp.c
index 4feb507eeee01e69999587a033abf716ae9ffb37..b721a2009b5030f440bed9eab8ed4f7003ae25a4 100644 (file)
--- a/drivers/net/dsa/bcm_sf2_cfp.c
+++ b/drivers/net/dsa/bcm_sf2_cfp.c
@@ -750,7 +750,7 @@ static int bcm_sf2_cfp_rule_set(struct dsa_switch *ds, int port,
        port_num = fs->ring_cookie / SF2_NUM_EGRESS_QUEUES;
 
        if (fs->ring_cookie == RX_CLS_FLOW_DISC ||
-           !(BIT(port_num) & ds->enabled_port_mask) ||
+           !dsa_is_user_port(ds, port_num) ||
            port_num >= priv->hw_params.num_ports)
                return -EINVAL;
        /*

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 21431be2831ee2de028df6d5c3bd4827cb8fa8e8..d1d4eea6a875894dfc9f2aa4e5ebc36690d82eaf 100644 (file)
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -781,7 +781,7 @@ mt7530_port_bridge_join(struct dsa_switch *ds, int port,
                 * same bridge. If the port is disabled, port matrix is kept
                 * and not being setup until the port becomes enabled.
                 */
-               if (ds->enabled_port_mask & BIT(i) && i != port) {
+               if (dsa_is_user_port(ds, i) && i != port) {
                        if (dsa_to_port(ds, i)->bridge_dev != bridge)
                                continue;
                        if (priv->ports[i].enable)
@@ -818,7 +818,7 @@ mt7530_port_bridge_leave(struct dsa_switch *ds, int port,
                 * in the same bridge. If the port is disabled, port matrix
                 * is kept and not being setup until the port becomes enabled.
                 */
-               if (ds->enabled_port_mask & BIT(i) && i != port) {
+               if (dsa_is_user_port(ds, i) && i != port) {
                        if (dsa_to_port(ds, i)->bridge_dev != bridge)
                                continue;
                        if (priv->ports[i].enable)

diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index d1b0b1fb632f7207d6548d8b8a124eae54b6c4db..37125858fe80de3aee68d4890e7b4d7ebacfbeb9 100644 (file)
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -536,7 +536,7 @@ qca8k_setup(struct dsa_switch *ds)
 
        /* Disable MAC by default on all user ports */
        for (i = 1; i < QCA8K_NUM_PORTS; i++)
-               if (ds->enabled_port_mask & BIT(i))
+               if (dsa_is_user_port(ds, i))
                        qca8k_port_set_status(priv, i, 0);
 
        /* Forward all unknown frames to CPU port for Linux processing */
@@ -556,7 +556,7 @@ qca8k_setup(struct dsa_switch *ds)
                }
 
                /* Invividual user ports get connected to CPU port only */
-               if (ds->enabled_port_mask & BIT(i)) {
+               if (dsa_is_user_port(ds, i)) {
                        int shift = 16 * (i % 2);
 
                        qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),

diff --git a/net/dsa/dsa.c b/net/dsa/dsa.c
index a3abf7a7b9a250d677409048e842a3768b89861c..fe0081730305002c4968b6cd76a5ae9ba954b0ed 100644 (file)
--- a/net/dsa/dsa.c
+++ b/net/dsa/dsa.c
@@ -201,7 +201,7 @@ static int dsa_switch_rcv(struct sk_buff *skb, struct net_device *dev,
 #ifdef CONFIG_PM_SLEEP
 static bool dsa_is_port_initialized(struct dsa_switch *ds, int p)
 {
-       return ds->enabled_port_mask & (1 << p) && ds->ports[p].slave;
+       return dsa_is_user_port(ds, p) && ds->ports[p].slave;
 }
 
 int dsa_switch_suspend(struct dsa_switch *ds)

diff --git a/net/dsa/legacy.c b/net/dsa/legacy.c
index 93c1c43bcc58352c9aa5d9aa4b9e06cfecc40f91..0b79c6171d0d3ffa4c86556fd692b5af7f849d77 100644 (file)
--- a/net/dsa/legacy.c
+++ b/net/dsa/legacy.c
@@ -190,7 +190,7 @@ static int dsa_switch_setup_one(struct dsa_switch *ds,
                ds->ports[i].dn = cd->port_dn[i];
                ds->ports[i].cpu_dp = dst->cpu_dp;
 
-               if (!(ds->enabled_port_mask & (1 << i)))
+               if (dsa_is_user_port(ds, i))
                        continue;
 
                ret = dsa_slave_create(&ds->ports[i], cd->port_names[i]);
@@ -258,7 +258,7 @@ static void dsa_switch_destroy(struct dsa_switch *ds)
 
        /* Destroy network devices for physical switch ports. */
        for (port = 0; port < ds->num_ports; port++) {
-               if (!(ds->enabled_port_mask & (1 << port)))
+               if (!dsa_is_user_port(ds, port))
                        continue;
 
                if (!ds->ports[port].slave)