+++ /dev/null
-/*
- * P1022 DS 36Bit Physical Address Map Device Tree Source
- *
- * Copyright 2010 Freescale Semiconductor, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/include/ "fsl/p1022si-pre.dtsi"
-/ {
- model = "fsl,P1022DS";
- compatible = "fsl,P1022DS";
-
- memory {
- device_type = "memory";
- };
-
- lbc: localbus@fffe05000 {
- reg = <0xf 0xffe05000 0 0x1000>;
- ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
- 0x1 0x0 0xf 0xe0000000 0x08000000
- 0x2 0x0 0xf 0xff800000 0x00040000
- 0x3 0x0 0xf 0xffdf0000 0x00008000>;
-
- /*
- * This node is used to access the pixis via "indirect" mode,
- * which is done by writing the pixis register index to chip
- * select 0 and the value to/from chip select 1. Indirect
- * mode is the only way to access the pixis when DIU video
- * is enabled. Note that this assumes that the first column
- * of the 'ranges' property above is the chip select number.
- */
- board-control@0,0 {
- compatible = "fsl,p1022ds-indirect-pixis";
- reg = <0x0 0x0 1 /* CS0 */
- 0x1 0x0 1>; /* CS1 */
- };
-
- nor@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x8000000>;
- bank-width = <2>;
- device-width = <1>;
-
- partition@0 {
- reg = <0x0 0x03000000>;
- label = "ramdisk-nor";
- read-only;
- };
-
- partition@3000000 {
- reg = <0x03000000 0x00e00000>;
- label = "diagnostic-nor";
- read-only;
- };
-
- partition@3e00000 {
- reg = <0x03e00000 0x00200000>;
- label = "dink-nor";
- read-only;
- };
-
- partition@4000000 {
- reg = <0x04000000 0x00400000>;
- label = "kernel-nor";
- read-only;
- };
-
- partition@4400000 {
- reg = <0x04400000 0x03b00000>;
- label = "jffs2-nor";
- };
-
- partition@7f00000 {
- reg = <0x07f00000 0x00080000>;
- label = "dtb-nor";
- read-only;
- };
-
- partition@7f80000 {
- reg = <0x07f80000 0x00080000>;
- label = "u-boot-nor";
- read-only;
- };
- };
-
- nand@2,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,elbc-fcm-nand";
- reg = <0x2 0x0 0x40000>;
-
- partition@0 {
- reg = <0x0 0x02000000>;
- label = "u-boot-nand";
- read-only;
- };
-
- partition@2000000 {
- reg = <0x02000000 0x10000000>;
- label = "jffs2-nand";
- };
-
- partition@12000000 {
- reg = <0x12000000 0x10000000>;
- label = "ramdisk-nand";
- read-only;
- };
-
- partition@22000000 {
- reg = <0x22000000 0x04000000>;
- label = "kernel-nand";
- };
-
- partition@26000000 {
- reg = <0x26000000 0x01000000>;
- label = "dtb-nand";
- read-only;
- };
-
- partition@27000000 {
- reg = <0x27000000 0x19000000>;
- label = "reserved-nand";
- };
- };
-
- board-control@3,0 {
- compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis";
- reg = <3 0 0x30>;
- interrupt-parent = <&mpic>;
- /*
- * IRQ8 is generated if the "EVENT" switch is pressed
- * and PX_CTL[EVESEL] is set to 00.
- */
- interrupts = <8 8 0 0>;
- };
- };
-
- soc: soc@fffe00000 {
- ranges = <0x0 0xf 0xffe00000 0x100000>;
-
- i2c@3100 {
- wm8776:codec@1a {
- compatible = "wlf,wm8776";
- reg = <0x1a>;
- /*
- * clock-frequency will be set by U-Boot if
- * the clock is enabled.
- */
- };
- };
-
- spi@7000 {
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "spansion,s25sl12801";
- reg = <0>;
- spi-max-frequency = <40000000>; /* input clock */
-
- partition@0 {
- label = "u-boot-spi";
- reg = <0x00000000 0x00100000>;
- read-only;
- };
- partition@100000 {
- label = "kernel-spi";
- reg = <0x00100000 0x00500000>;
- read-only;
- };
- partition@600000 {
- label = "dtb-spi";
- reg = <0x00600000 0x00100000>;
- read-only;
- };
- partition@700000 {
- label = "file system-spi";
- reg = <0x00700000 0x00900000>;
- };
- };
- };
-
- ssi@15000 {
- fsl,mode = "i2s-slave";
- codec-handle = <&wm8776>;
- fsl,ssi-asynchronous;
- };
-
- usb@22000 {
- phy_type = "ulpi";
- };
-
- usb@23000 {
- status = "disabled";
- };
-
- mdio@24000 {
- phy0: ethernet-phy@0 {
- interrupts = <3 1 0 0>;
- reg = <0x1>;
- };
- phy1: ethernet-phy@1 {
- interrupts = <9 1 0 0>;
- reg = <0x2>;
- };
- tbi-phy@2 {
- device_type = "tbi-phy";
- reg = <0x2>;
- };
- };
-
- ethernet@b0000 {
- phy-handle = <&phy0>;
- phy-connection-type = "rgmii-id";
- };
-
- ethernet@b1000 {
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
- };
- };
-
- pci0: pcie@fffe09000 {
- reg = <0xf 0xffe09000 0 0x1000>;
- ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
- pcie@0 {
- ranges = <0x2000000 0x0 0xe0000000
- 0x2000000 0x0 0xe0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
-
- pci1: pcie@fffe0a000 {
- reg = <0xf 0xffe0a000 0 0x1000>;
- ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>;
- pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- ranges = <0x2000000 0x0 0xe0000000
- 0x2000000 0x0 0xe0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
-
- pci2: pcie@fffe0b000 {
- reg = <0xf 0xffe0b000 0 0x1000>;
- ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
- pcie@0 {
- ranges = <0x2000000 0x0 0xe0000000
- 0x2000000 0x0 0xe0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
-};
-
-/include/ "fsl/p1022si-post.dtsi"
--- /dev/null
+/*
+ * P1022 DS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_lbc {
+ /*
+ * This node is used to access the pixis via "indirect" mode,
+ * which is done by writing the pixis register index to chip
+ * select 0 and the value to/from chip select 1. Indirect
+ * mode is the only way to access the pixis when DIU video
+ * is enabled. Note that this assumes that the first column
+ * of the 'ranges' property above is the chip select number.
+ */
+ board-control@0,0 {
+ compatible = "fsl,p1022ds-indirect-pixis";
+ reg = <0x0 0x0 1 /* CS0 */
+ 0x1 0x0 1>; /* CS1 */
+ interrupt-parent = <&mpic>;
+ interrupts = <8 0 0 0>;
+ };
+
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x8000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ partition@0 {
+ reg = <0x0 0x03000000>;
+ label = "ramdisk-nor";
+ read-only;
+ };
+
+ partition@3000000 {
+ reg = <0x03000000 0x00e00000>;
+ label = "diagnostic-nor";
+ read-only;
+ };
+
+ partition@3e00000 {
+ reg = <0x03e00000 0x00200000>;
+ label = "dink-nor";
+ read-only;
+ };
+
+ partition@4000000 {
+ reg = <0x04000000 0x00400000>;
+ label = "kernel-nor";
+ read-only;
+ };
+
+ partition@4400000 {
+ reg = <0x04400000 0x03b00000>;
+ label = "jffs2-nor";
+ };
+
+ partition@7f00000 {
+ reg = <0x07f00000 0x00080000>;
+ label = "dtb-nor";
+ read-only;
+ };
+
+ partition@7f80000 {
+ reg = <0x07f80000 0x00080000>;
+ label = "u-boot-nor";
+ read-only;
+ };
+ };
+
+ nand@2,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,elbc-fcm-nand";
+ reg = <0x2 0x0 0x40000>;
+
+ partition@0 {
+ reg = <0x0 0x02000000>;
+ label = "u-boot-nand";
+ read-only;
+ };
+
+ partition@2000000 {
+ reg = <0x02000000 0x10000000>;
+ label = "jffs2-nand";
+ };
+
+ partition@12000000 {
+ reg = <0x12000000 0x10000000>;
+ label = "ramdisk-nand";
+ read-only;
+ };
+
+ partition@22000000 {
+ reg = <0x22000000 0x04000000>;
+ label = "kernel-nand";
+ };
+
+ partition@26000000 {
+ reg = <0x26000000 0x01000000>;
+ label = "dtb-nand";
+ read-only;
+ };
+
+ partition@27000000 {
+ reg = <0x27000000 0x19000000>;
+ label = "reserved-nand";
+ };
+ };
+
+ board-control@3,0 {
+ compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis";
+ reg = <3 0 0x30>;
+ interrupt-parent = <&mpic>;
+ /*
+ * IRQ8 is generated if the "EVENT" switch is pressed
+ * and PX_CTL[EVESEL] is set to 00.
+ */
+ interrupts = <8 0 0 0>;
+ };
+};
+
+&board_soc {
+ i2c@3100 {
+ wm8776:codec@1a {
+ compatible = "wlf,wm8776";
+ reg = <0x1a>;
+ /*
+ * clock-frequency will be set by U-Boot if
+ * the clock is enabled.
+ */
+ };
+ };
+
+ spi@7000 {
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25sl12801";
+ reg = <0>;
+ spi-max-frequency = <40000000>; /* input clock */
+
+ partition@0 {
+ label = "u-boot-spi";
+ reg = <0x00000000 0x00100000>;
+ read-only;
+ };
+ partition@100000 {
+ label = "kernel-spi";
+ reg = <0x00100000 0x00500000>;
+ read-only;
+ };
+ partition@600000 {
+ label = "dtb-spi";
+ reg = <0x00600000 0x00100000>;
+ read-only;
+ };
+ partition@700000 {
+ label = "file system-spi";
+ reg = <0x00700000 0x00900000>;
+ };
+ };
+ };
+
+ ssi@15000 {
+ fsl,mode = "i2s-slave";
+ codec-handle = <&wm8776>;
+ fsl,ssi-asynchronous;
+ };
+
+ usb@22000 {
+ phy_type = "ulpi";
+ };
+
+ usb@23000 {
+ status = "disabled";
+ };
+
+ mdio@24000 {
+ phy0: ethernet-phy@0 {
+ interrupts = <3 1 0 0>;
+ reg = <0x1>;
+ };
+ phy1: ethernet-phy@1 {
+ interrupts = <9 1 0 0>;
+ reg = <0x2>;
+ };
+ tbi-phy@2 {
+ device_type = "tbi-phy";
+ reg = <0x2>;
+ };
+ };
+
+ ethernet@b0000 {
+ phy-handle = <&phy0>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ ethernet@b1000 {
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+ };
+};
--- /dev/null
+/*
+ * P1022 DS 32-bit Physical Address Map Device Tree Source
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1022si-pre.dtsi"
+/ {
+ model = "fsl,P1022DS";
+ compatible = "fsl,P1022DS";
+
+ memory {
+ device_type = "memory";
+ };
+
+ board_lbc: lbc: localbus@ffe05000 {
+ ranges = <0x0 0x0 0x0 0xe8000000 0x08000000
+ 0x1 0x0 0x0 0xe0000000 0x08000000
+ 0x2 0x0 0x0 0xff800000 0x00040000
+ 0x3 0x0 0x0 0xffdf0000 0x00008000>;
+ reg = <0x0 0xffe05000 0 0x1000>;
+ };
+
+ board_soc: soc: soc@ffe00000 {
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
+ };
+
+ pci0: pcie@ffe09000 {
+ ranges = <0x2000000 0x0 0xe0000000 0 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+ reg = <0x0 0xffe09000 0 0x1000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xe0000000
+ 0x2000000 0x0 0xe0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ pci1: pcie@ffe0a000 {
+ ranges = <0x2000000 0x0 0xe0000000 0 0xc0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+ reg = <0 0xffe0a000 0 0x1000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xe0000000
+ 0x2000000 0x0 0xe0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ pci2: pcie@ffe0b000 {
+ ranges = <0x2000000 0x0 0xe0000000 0 0x80000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+ reg = <0 0xffe0b000 0 0x1000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xe0000000
+ 0x2000000 0x0 0xe0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+};
+
+/include/ "fsl/p1022si-post.dtsi"
+/include/ "p1022ds.dtsi"
--- /dev/null
+/*
+ * P1022 DS 36-bit Physical Address Map Device Tree Source
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1022si-pre.dtsi"
+/ {
+ model = "fsl,P1022DS";
+ compatible = "fsl,P1022DS";
+
+ memory {
+ device_type = "memory";
+ };
+
+ board_lbc: lbc: localbus@fffe05000 {
+ ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
+ 0x1 0x0 0xf 0xe0000000 0x08000000
+ 0x2 0x0 0xf 0xff800000 0x00040000
+ 0x3 0x0 0xf 0xffdf0000 0x00008000>;
+ reg = <0xf 0xffe05000 0 0x1000>;
+ };
+
+ board_soc: soc: soc@fffe00000 {
+ ranges = <0x0 0xf 0xffe00000 0x100000>;
+ };
+
+ pci0: pcie@fffe09000 {
+ ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+ reg = <0xf 0xffe09000 0 0x1000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xe0000000
+ 0x2000000 0x0 0xe0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ pci1: pcie@fffe0a000 {
+ ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>;
+ reg = <0xf 0xffe0a000 0 0x1000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xe0000000
+ 0x2000000 0x0 0xe0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ pci2: pcie@fffe0b000 {
+ ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+ reg = <0xf 0xffe0b000 0 0x1000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xe0000000
+ 0x2000000 0x0 0xe0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+};
+
+/include/ "fsl/p1022si-post.dtsi"
+/include/ "p1022ds.dtsi"
projects / openwrt / staging / blogic.git / commitdiff