PKG_NAME:=banip
PKG_VERSION:=0.9.5
-PKG_RELEASE:=2
+PKG_RELEASE:=3
PKG_LICENSE:=GPL-3.0-or-later
PKG_MAINTAINER:=Dirk Brenken <dev@brenken.org>
| adguard | adguard IPs | | | x | tcp: 80, 443 | [Link](https://github.com/dibdot/banIP-IP-blocklists) |
| adguardtrackers | adguardtracker IPs | | | x | tcp: 80, 443 | [Link](https://github.com/dibdot/banIP-IP-blocklists) |
| antipopads | antipopads IPs | | | x | tcp: 80, 443 | [Link](https://github.com/dibdot/banIP-IP-blocklists) |
-| asn | ASN segments | | | x | tcp: 80, 443 | [Link](https://asn.ipinfo.app) |
+| asn | ASN segments | x | x | x | | [Link](https://asn.ipinfo.app) |
| backscatterer | backscatterer IPs | x | x | | | [Link](https://www.uceprotect.net/en/index.php) |
| becyber | malicious attacker IPs | x | x | | | [Link](https://github.com/duggytuxy/malicious_ip_addresses) |
| binarydefense | binary defense banlist | x | x | | | [Link](https://iplists.firehol.org/?ipset=bds_atif) |
* It's strongly recommended to use the LuCI frontend to easily configure all aspects of banIP, the application is located in LuCI under the 'Services' menu
* If you're using a complex network setup, e.g. special tunnel interfaces, than untick the 'Auto Detection' option under the 'General Settings' tab and set the required options manually
* Start the service with '/etc/init.d/banip start' and check everything is working by running '/etc/init.d/banip status' and also check the 'Firewall Log' and 'Processing Log' tabs
-* If you're going to configure banIP via CLI, edit the config file '/etc/config/banip' and enable the service (set ban\_enabled to '1'), then add pre-configured feeds via 'ban\_feed' (see the feed list above) and add/change other options to your needs (see the options reference below)
+* If you're going to configure banIP via CLI, edit the config file '/etc/config/banip' and enable the service (set ban\_enabled to '1'), then add pre-configured feeds via 'ban\_feed' (see the feed list above) and add/change other options to your needs, see the options reference table below
## banIP CLI interface
* All important banIP functions are accessible via CLI.
"rule_4": "/^(([0-9]{1,3}\\.){3}(1?[0-9][0-9]?|2[0-4][0-9]|25[0-5])(\\/(1?[0-9]|2?[0-9]|3?[0-2]))?)$/{printf \"%s,\\n\",$1}",
"rule_6": "/^(([0-9A-f]{0,4}:){1,7}[0-9A-f]{0,4}:?(\\/(1?[0-2][0-8]|[0-9][0-9]))?)$/{printf \"%s,\\n\",$1}",
"descr": "tor exit nodes",
- "flag": "tcp 80-89 443"
+ "flag": "gz tcp 80-88 udp 50000"
},
[...]
```
Add an unique feed name (no spaces, no special chars) and make the required changes: adapt at least the URL, the regex and the description for a new feed.
-Please note: the flag field is optional, it's a space separated list of options: supported are 'gz' as an archive format, protocols 'tcp' or 'udp' with port numbers/port ranges for destination port limitations.
+Please note: the flag field is optional, it's a space separated list of options: supported are 'gz' as an archive format, protocols 'tcp' or 'udp' with port numbers/port ranges for destination port limitations - multiple definitions are possible.
## Support
Please join the banIP discussion in this [forum thread](https://forum.openwrt.org/t/banip-support-thread/16985) or contact me by mail <dev@brenken.org>
# build initial nft file with base table, chains and rules
#
f_nftinit() {
- local wan_dev vlan_allow vlan_block log_ct log_icmp log_syn log_udp log_tcp feed_log feed_rc allow_proto allow_dport flag file="${1}"
+ local wan_dev vlan_allow vlan_block log_ct log_icmp log_syn log_udp log_tcp feed_log feed_rc flag tmp_proto tmp_port allow_dport file="${1}"
wan_dev="$(printf "%s" "${ban_dev}" | "${ban_sedcmd}" 's/^/\"/;s/$/\"/;s/ /\", \"/g')"
[ -n "${ban_vlanallow}" ] && vlan_allow="$(printf "%s" "${ban_vlanallow%%?}" | "${ban_sedcmd}" 's/^/\"/;s/$/\"/;s/ /\", \"/g')"
[ -n "${ban_vlanblock}" ] && vlan_block="$(printf "%s" "${ban_vlanblock%%?}" | "${ban_sedcmd}" 's/^/\"/;s/$/\"/;s/ /\", \"/g')"
for flag in ${ban_allowflag}; do
- if [ -z "${allow_proto}" ] && { [ "${flag}" = "tcp" ] || [ "${flag}" = "udp" ]; }; then
- allow_proto="${flag}"
- elif [ -n "${allow_proto}" ] && [ -n "${flag//[![:digit]-]/}" ] && ! printf "%s" "${allow_dport}" | "${ban_grepcmd}" -qw "${flag}"; then
- if [ -z "${allow_dport}" ]; then
- allow_dport="${flag}"
- else
- allow_dport="${allow_dport}, ${flag}"
+ if [ "${flag}" = "tcp" ] || [ "${flag}" = "udp" ]; then
+ if [ -z "${tmp_proto}" ]; then
+ tmp_proto="${flag}"
+ elif ! printf "%s" "${tmp_proto}" | "${ban_grepcmd}" -qw "${flag}"; then
+ tmp_proto="${tmp_proto}, ${flag}"
+ fi
+ elif [ -n "${flag//[![:digit]-]/}" ]; then
+ if [ -z "${tmp_port}" ]; then
+ tmp_port="${flag}"
+ elif ! printf "%s" "${tmp_port}" | "${ban_grepcmd}" -qw "${flag}"; then
+ tmp_port="${tmp_port}, ${flag}"
fi
fi
done
- [ -n "${allow_dport}" ] && allow_dport="${allow_proto} dport { ${allow_dport} }"
+ if [ -n "${tmp_proto}" ] && [ -n "${tmp_port}" ]; then
+ allow_dport="meta l4proto { ${tmp_proto} } th dport { ${tmp_port} }"
+ fi
if [ "${ban_logprerouting}" = "1" ]; then
log_icmp="log level ${ban_nftloglevel} prefix \"banIP/pre-icmp/drop: \""
#
f_down() {
local log_input log_forwardwan log_forwardlan start_ts end_ts tmp_raw tmp_load tmp_file split_file ruleset_raw handle rc etag_rc
- local expr cnt_set cnt_dl restore_rc feed_direction feed_rc feed_log feed_comp feed_proto feed_dport feed_target
+ local expr cnt_set cnt_dl restore_rc feed_direction feed_rc feed_log feed_comp feed_target feed_dport tmp_proto tmp_port flag
local feed="${1}" proto="${2}" feed_url="${3}" feed_rule="${4}" feed_flag="${5}"
start_ts="$(date +%s)"
# prepare feed flags
#
for flag in ${feed_flag}; do
- if [ "${flag}" = "gz" ] && ! printf "%s" "${feed_comp}" | "${ban_grepcmd}" -qw "${flag}"; then
+ if [ "${flag}" = "gz" ]; then
feed_comp="${flag}"
- elif [ -z "${feed_proto}" ] && { [ "${flag}" = "tcp" ] || [ "${flag}" = "udp" ]; }; then
- feed_proto="${flag}"
- elif [ -n "${feed_proto}" ] && [ -n "${flag//[![:digit]-]/}" ] && ! printf "%s" "${feed_dport}" | "${ban_grepcmd}" -qw "${flag}"; then
- if [ -z "${feed_dport}" ]; then
- feed_dport="${flag}"
- else
- feed_dport="${feed_dport}, ${flag}"
+ elif [ "${flag}" = "tcp" ] || [ "${flag}" = "udp" ]; then
+ if [ -z "${tmp_proto}" ]; then
+ tmp_proto="${flag}"
+ elif ! printf "%s" "${tmp_proto}" | "${ban_grepcmd}" -qw "${flag}"; then
+ tmp_proto="${tmp_proto}, ${flag}"
+ fi
+ elif [ -n "${flag//[![:digit]-]/}" ]; then
+ if [ -z "${tmp_port}" ]; then
+ tmp_port="${flag}"
+ elif ! printf "%s" "${tmp_port}" | "${ban_grepcmd}" -qw "${flag}"; then
+ tmp_port="${tmp_port}, ${flag}"
fi
fi
done
- [ -n "${feed_dport}" ] && feed_dport="${feed_proto} dport { ${feed_dport} }"
+ if [ -n "${tmp_proto}" ] && [ -n "${tmp_port}" ]; then
+ feed_dport="meta l4proto { ${tmp_proto} } th dport { ${tmp_port} }"
+ fi
# chain/rule maintenance
#
"url_6": "https://asn.ipinfo.app/api/text/list/",
"rule_4": "/^(([0-9]{1,3}\\.){3}(1?[0-9][0-9]?|2[0-4][0-9]|25[0-5])(\\/(1?[0-9]|2?[0-9]|3?[0-2]))?)$/{printf \"%s,\\n\",$1}",
"rule_6": "/^(([0-9A-f]{0,4}:){1,7}[0-9A-f]{0,4}:?(\\/(1?[0-2][0-8]|[0-9][0-9]))?)$/{printf \"%s,\\n\",$1}",
- "descr": "ASN IP segments",
- "flag": "tcp 80 443"
+ "descr": "ASN IP segments"
},
"backscatterer":{
"url_4": "http://wget-mirrors.uceprotect.net/rbldnsd-all/ips.backscatterer.org.gz",
projects / feed / packages.git / commitdiff