-LINUX_VERSION-5.10 = .191
-LINUX_KERNEL_HASH-5.10.191 = cb54660ed4917cc4f9a9ab93d117defefd8bcbe745ec6082d909bbfd5ae962c2
+LINUX_VERSION-5.10 = .192
+LINUX_KERNEL_HASH-5.10.192 = c40d11ee56e50a132429badbd1ba1c53e42b3312590b2a39be34c241d1b0b5b9
static inline int mmc_blk_part_switch(struct mmc_card *card,
unsigned int part_type);
static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
-@@ -2906,6 +2913,7 @@ static int mmc_blk_probe(struct mmc_card
+@@ -2907,6 +2914,7 @@ static int mmc_blk_probe(struct mmc_card
{
struct mmc_blk_data *md, *part_md;
char cap_str[10];
/*
* Check that the card supports the command class(es) we need.
-@@ -2913,7 +2921,16 @@ static int mmc_blk_probe(struct mmc_card
+@@ -2914,7 +2922,16 @@ static int mmc_blk_probe(struct mmc_card
if (!(card->csd.cmdclass & CCC_BLOCK_READ))
return -ENODEV;
card->complete_wq = alloc_workqueue("mmc_complete",
WQ_MEM_RECLAIM | WQ_HIGHPRI, 0);
-@@ -2928,9 +2945,14 @@ static int mmc_blk_probe(struct mmc_card
+@@ -2929,9 +2946,14 @@ static int mmc_blk_probe(struct mmc_card
string_get_size((u64)get_capacity(md->disk), 512, STRING_UNITS_2,
cap_str, sizeof(cap_str));
#define USB_VENDOR_ID_BELKIN 0x050d
#define USB_DEVICE_ID_FLIP_KVM 0x3201
-@@ -1281,6 +1284,9 @@
+@@ -1282,6 +1285,9 @@
#define USB_VENDOR_ID_XAT 0x2505
#define USB_DEVICE_ID_XAT_CSR 0x0220
{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_MULTI_TOUCH), HID_QUIRK_MULTI_INPUT },
{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_PIXART_USB_OPTICAL_MOUSE), HID_QUIRK_ALWAYS_POLL },
{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_PIXART_USB_OPTICAL_MOUSE2), HID_QUIRK_ALWAYS_POLL },
-@@ -197,6 +198,7 @@ static const struct hid_device_id hid_qu
+@@ -198,6 +199,7 @@ static const struct hid_device_id hid_qu
{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_QUAD_USB_JOYPAD), HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
{ HID_USB_DEVICE(USB_VENDOR_ID_XIN_MO, USB_DEVICE_ID_XIN_MO_DUAL_ARCADE), HID_QUIRK_MULTI_INPUT },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_GROUP_AUDIO), HID_QUIRK_NOGET },
return;
val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_SCR3);
-@@ -784,13 +785,21 @@ static struct phy_driver broadcom_driver
+@@ -795,13 +796,21 @@ static struct phy_driver broadcom_driver
.config_intr = bcm_phy_config_intr,
}, {
.phy_id = PHY_ID_BCM54210E,
.phy_id = PHY_ID_BCM5461,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM5461",
-@@ -946,7 +955,8 @@ module_phy_driver(broadcom_drivers);
+@@ -959,7 +968,8 @@ module_phy_driver(broadcom_drivers);
static struct mdio_device_id __maybe_unused broadcom_tbl[] = {
{ PHY_ID_BCM5411, 0xfffffff0 },
{ PHY_ID_BCM5421, 0xfffffff0 },
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
-@@ -2668,6 +2668,9 @@ static int mv88e6xxx_setup_port(struct m
+@@ -2676,6 +2676,9 @@ static int mv88e6xxx_setup_port(struct m
if (dsa_is_cpu_port(ds, port))
reg = 0;
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
-@@ -2886,6 +2886,7 @@ static int mv88e6xxx_setup(struct dsa_sw
+@@ -2894,6 +2894,7 @@ static int mv88e6xxx_setup(struct dsa_sw
chip->ds = ds;
ds->slave_mii_bus = mv88e6xxx_default_mdio_bus(chip);
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
-@@ -5456,6 +5456,7 @@ static int mv88e6xxx_register_switch(str
+@@ -5464,6 +5464,7 @@ static int mv88e6xxx_register_switch(str
ds->ops = &mv88e6xxx_switch_ops;
ds->ageing_time_min = chip->info->age_time_coeff;
ds->ageing_time_max = chip->info->age_time_coeff * U8_MAX;
+++ /dev/null
-From e12f67fe83446432ef16704c22ec23bd1dbcd094 Mon Sep 17 00:00:00 2001
-From: Vicente Bergas <vicencb@gmail.com>
-Date: Tue, 1 Dec 2020 16:41:32 +0100
-Subject: arm64: dts: rockchip: use USB host by default on rk3399-rock-pi-4
-
-Based on the board schematics at
-https://dl.radxa.com/rockpi4/docs/hw/rockpi4/rockpi_4c_v12_sch_20200620.pdf
-on page 19 there is an USB Type-A receptacle being used as an USB-OTG port.
-
-But the Type-A connector is not valid for OTG operation, for this reason
-there is a switch to select host or device role.
-This is non-compliant and error prone because switching is manual.
-So, use host mode as it corresponds for a Type-A receptacle.
-
-Signed-off-by: Vicente Bergas <vicencb@gmail.com>
-Link: https://lore.kernel.org/r/20201201154132.1286-4-vicencb@gmail.com
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
-+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
-@@ -679,7 +679,7 @@
-
- &usbdrd_dwc3_0 {
- status = "okay";
-- dr_mode = "otg";
-+ dr_mode = "host";
- };
-
- &usbdrd3_1 {