if (ixgbe_removed(reg_addr))
return IXGBE_FAILED_READ_REG;
if (unlikely(hw->phy.nw_mng_if_sel &
- IXGBE_NW_MNG_IF_SEL_ENABLE_10_100M)) {
+ IXGBE_NW_MNG_IF_SEL_SGMII_ENABLE)) {
struct ixgbe_adapter *adapter;
int i;
#define IXGBE_NW_MNG_IF_SEL_PHY_SPEED_1G BIT(19)
#define IXGBE_NW_MNG_IF_SEL_PHY_SPEED_2_5G BIT(20)
#define IXGBE_NW_MNG_IF_SEL_PHY_SPEED_10G BIT(21)
-#define IXGBE_NW_MNG_IF_SEL_ENABLE_10_100M BIT(23)
-#define IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE BIT(24)
+#define IXGBE_NW_MNG_IF_SEL_SGMII_ENABLE BIT(25)
+#define IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE BIT(24) /* X552 only */
#define IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD_SHIFT 3
#define IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD \
(0x1F << IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD_SHIFT)
**/
static s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed)
{
+ struct ixgbe_mac_info *mac = &hw->mac;
s32 status;
u32 reg_val;
+ /* iXFI is only supported with X552 */
+ if (mac->type != ixgbe_mac_X550EM_x)
+ return IXGBE_ERR_LINK_SETUP;
+
/* Disable AN and force speed to 10G Serial. */
status = ixgbe_read_iosf_sb_reg_x550(hw,
IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
else
force_speed = IXGBE_LINK_SPEED_1GB_FULL;
- /* If internal link mode is XFI, then setup XFI internal link. */
- if (!(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) {
+ /* If X552 and internal link mode is XFI, then setup XFI internal link.
+ */
+ if (hw->mac.type == ixgbe_mac_X550EM_x &&
+ !(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) {
status = ixgbe_setup_ixfi_x550em(hw, &force_speed);
if (status)
if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper)
return IXGBE_ERR_CONFIG;
- if (hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE) {
+ if (!(hw->mac.type == ixgbe_mac_X550EM_x &&
+ !(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE))) {
speed = IXGBE_LINK_SPEED_10GB_FULL |
IXGBE_LINK_SPEED_1GB_FULL;
return ixgbe_setup_kr_speed_x550em(hw, speed);