;;
"ath9k-eeprom-pci-0000:00:11.0.bin")
case $board in
- dlink,dir-825-b1)
- ath9k_eeprom_extract "caldata" 4096 3768
- ath9k_patch_fw_mac_crc $(mtd_get_mac_text "caldata" 65440) 524
- ;;
+ buffalo,wzr-hp-ag300h|\
netgear,wndr3700|\
netgear,wndr3700v2|\
netgear,wndr3800)
ath9k_eeprom_extract "art" 4096 3768
;;
+ dlink,dir-825-b1)
+ ath9k_eeprom_extract "caldata" 4096 3768
+ ath9k_patch_fw_mac_crc $(mtd_get_mac_text "caldata" 65440) 524
+ ;;
*)
ath9k_eeprom_die "board $board is not supported yet"
;;
;;
"ath9k-eeprom-pci-0000:00:12.0.bin")
case $board in
- dlink,dir-825-b1)
- ath9k_eeprom_extract "caldata" 20480 3768
- ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_text "caldata" 65460) 1) 524
- ;;
+ buffalo,wzr-hp-ag300h|\
netgear,wndr3700|\
netgear,wndr3700v2|\
netgear,wndr3800)
ath9k_eeprom_extract "art" 20480 3768
;;
+ dlink,dir-825-b1)
+ ath9k_eeprom_extract "caldata" 20480 3768
+ ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_text "caldata" 65460) 1) 524
+ ;;
*)
ath9k_eeprom_die "board $board is not supported yet"
;;
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar7100.dtsi"
+
+/ {
+ compatible = "buffalo,wzr-hp-ag300h", "qca,ar7161";
+ model = "Buffalo WZR-HP-AG300H/WZR-600DHP";
+
+ aliases {
+ led-boot = &diag;
+ led-failsafe = &diag;
+ led-upgrade = &diag;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ extosc: ref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "ref";
+ clock-frequency = <40000000>;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ diag: diag {
+ label = "buffalo:red:diag";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+ ath9k-leds {
+ // those leds are indeed attached to the wifi chips
+
+ compatible = "gpio-leds";
+ band2g_a {
+ label = "buffalo:amber:band2g";
+ gpios = <&ath9k0 1 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ usb {
+ label = "buffalo:green:usb";
+ gpios = <&ath9k0 3 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ trigger-sources = <&usb_ochi_port>, <&usb_echi_port>;
+ linux,default-trigger = "usbport";
+ };
+
+ band2g_g {
+ label = "buffalo:green:band2g";
+ gpios = <&ath9k0 5 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ linux,default-trigger = "phy0tpt";
+ };
+
+ band5g_g {
+ label = "buffalo:green:band5g";
+ gpios = <&ath9k1 1 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ linux,default-trigger = "phy1tpt";
+ };
+
+ router {
+ label = "buffalo:green:router";
+ gpios = <&ath9k1 3 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ movie_engine {
+ label = "buffalo:blue:movie_engine";
+ gpios = <&ath9k1 4 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ band5g_a {
+ label = "buffalo:amber:band5g";
+ gpios = <&ath9k1 5 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ usb {
+ linux,code = <BTN_2>;
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ aoss {
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ router_auto {
+ linux,code = <BTN_6>;
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ router_off {
+ linux,code = <BTN_5>;
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ movie_engine {
+ linux,code = <BTN_7>;
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+
+ gpio_usb_power {
+ gpio-export,name = "buffalo:power:usb";
+ gpio-export,output = <1>;
+ gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ flash {
+ compatible = "mtd-concat";
+
+ devices = <&flash0 &flash1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0000000 0x0040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x0040000 0x0010000>;
+ read-only;
+ };
+
+ art: partition@50000 {
+ label = "art";
+ reg = <0x0050000 0x0010000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "firmware";
+ reg = <0x0060000 0x1f90000>;
+ };
+
+ partition@1ff0000 {
+ label = "user_property";
+ reg = <0x1ff0000 0x0010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&usb1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ usb_ochi_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ usb_echi_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&pcie0 {
+ status = "okay";
+
+ ath9k0: wifi@0,11 {
+ compatible = "pci168c,0029";
+ reg = <0x8800 0 0 0 0>;
+ qca,no-eeprom;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ ath9k1: wifi@0,12 {
+ compatible = "pci168c,0029";
+ reg = <0x9000 0 0 0 0>;
+ qca,no-eeprom;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+};
+
+&uart {
+ status = "okay";
+};
+
+&pll {
+ clocks = <&extosc>;
+};
+
+&spi {
+ status = "okay";
+ num-cs = <2>;
+ cs-gpios = <0>, <0>;
+
+ flash0: flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <104000000>;
+ m25p,fast-read;
+ };
+
+ flash1: flash@1 {
+ compatible = "jedec,spi-nor";
+ reg = <1>;
+ spi-max-frequency = <104000000>;
+ m25p,fast-read;
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "rgmii";
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x120c>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x520c>;
+ mtd-mac-address-increment = <1>;
+
+ phy-handle = <&phy4>;
+};
+include ./common-buffalo.mk
include ./common-netgear.mk
DEVICE_VARS += ADDPATTERN_ID ADDPATTERN_VERSION
endef
TARGET_DEVICES += avm_fritz4020
+define Device/buffalo_wzr-hp-ag300h
+ ATH_SOC := ar7161
+ DEVICE_TITLE := Buffalo WZR-HP-AG300H
+ IMAGE_SIZE := 32256k
+ IMAGES += factory.bin tftp.bin
+ IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
+ IMAGE/factory.bin := $$(IMAGE/default) | buffalo-enc WZR-HP-AG300H 1.99 | buffalo-tag WZR-HP-AG300H
+ IMAGE/tftp.bin := $$(IMAGE/default) | buffalo-tftp-header
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport kmod-leds-reset kmod-owl-loader
+ SUPPORTED_DEVICES += wzr-hp-ag300h
+endef
+TARGET_DEVICES += buffalo_wzr-hp-ag300h
+
define Device/buffalo_wzr-hp-g450h
ATH_SOC := ar7242
DEVICE_TITLE := Buffalo WZR-HP-G450H
projects / openwrt / staging / zorun.git / commitdiff