Change switch port labels to ethblack & ethblue.
Change lan1 & lan2 LEDs to ethblack_act & ethblue_act and fix GPIO pins.
Add the external phy with ethyellow label on the GB-PC2 devicetree.
Do not claim rgmii2 as gpio, it's used for ethernet with rgmii2 function.
Enable ICPlus PHY driver for IP1001 which GB-PC2 has got.
Update interface name and change netdev function.
Enable lzma compression to make up for the increased size of the kernel.
Make spi flash bindings on par with mainline Linux to fix read errors.
Tested on GB-PC2 by Petr.
Tested-by: Petr Louda <petr.louda@outlook.cz>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
model = "GB-PC1";
aliases {
- led-boot = &led_status;
- led-failsafe = &led_status;
- led-running = &led_status;
- led-upgrade = &led_status;
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
};
keys {
leds {
compatible = "gpio-leds";
- system {
- label = "green:system";
- gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ ethblack_act {
+ label = "green:ethblack_act";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
- led_status: status {
- label = "green:status";
- gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ ethblue_act {
+ label = "green:ethblue_act";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
- lan1 {
- label = "green:lan1";
- gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
+ power {
+ label = "green:power";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
};
- lan2 {
- label = "green:lan2";
- gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
+ led_system: system {
+ label = "green:system";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "disk-activity";
};
};
};
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
- spi-max-frequency = <80000000>;
+ spi-max-frequency = <50000000>;
broken-flash-reset;
- m25p,fast-read;
partitions {
compatible = "fixed-partitions";
status = "okay";
};
-ðernet {
- pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>;
-};
-
&gmac0 {
nvmem-cells = <&macaddr_factory_e000>;
nvmem-cell-names = "mac-address";
ports {
port@0 {
status = "okay";
- label = "lan1";
+ label = "ethblack";
};
port@4 {
status = "okay";
- label = "lan2";
+ label = "ethblue";
};
};
};
&state_default {
gpio {
- groups = "jtag", "rgmii2", "uart3", "wdt";
+ groups = "jtag", "uart3", "wdt";
function = "gpio";
};
};
model = "GB-PC2";
aliases {
- led-boot = &led_status;
- led-failsafe = &led_status;
- led-running = &led_status;
- led-upgrade = &led_status;
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
};
keys {
leds {
compatible = "gpio-leds";
- system {
- label = "green:system";
- gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
- };
-
- led_status: status {
- label = "green:status";
- gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ ethblack_act {
+ label = "green:ethblack_act";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
- lan1 {
- label = "green:lan1";
- gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
+ ethblue_act {
+ label = "green:ethblue_act";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
- lan2 {
- label = "green:lan2";
- gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
- };
-
- lan3-yellow {
- label = "yellow:lan3";
- gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ power {
+ label = "green:power";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
};
- lan3-green {
- label = "green:lan3";
- gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ led_system: system {
+ label = "green:system";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "disk-activity";
};
};
};
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
- spi-max-frequency = <80000000>;
+ spi-max-frequency = <50000000>;
broken-flash-reset;
- m25p,fast-read;
partitions {
compatible = "fixed-partitions";
status = "okay";
};
-ðernet {
- pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>;
+&gmac0 {
+ nvmem-cells = <&macaddr_factory_e000>;
+ nvmem-cell-names = "mac-address";
};
-&gmac0 {
+&gmac1 {
+ status = "okay";
+ label = "ethyellow";
+ phy-handle = <ðphy5>;
+
nvmem-cells = <&macaddr_factory_e000>;
nvmem-cell-names = "mac-address";
};
+&mdio {
+ ethphy5: ethernet-phy@5 {
+ reg = <5>;
+ phy-mode = "rgmii-rxid";
+ };
+};
+
&switch0 {
ports {
port@0 {
status = "okay";
- label = "lan1";
+ label = "ethblack";
};
port@4 {
status = "okay";
- label = "lan2";
+ label = "ethblue";
};
};
};
&state_default {
gpio {
- groups = "jtag", "rgmii2", "uart3", "wdt";
+ groups = "jtag", "uart3", "wdt";
function = "gpio";
};
};
define Device/gnubee_gb-pc1
$(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
DEVICE_VENDOR := GnuBee
DEVICE_MODEL := Personal Cloud One
DEVICE_PACKAGES := kmod-ata-ahci kmod-usb3 kmod-sdhci-mt7620 -wpad-basic-wolfssl
define Device/gnubee_gb-pc2
$(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
DEVICE_VENDOR := GnuBee
DEVICE_MODEL := Personal Cloud Two
DEVICE_PACKAGES := kmod-ata-ahci kmod-usb3 kmod-sdhci-mt7620 -wpad-basic-wolfssl
;;
gnubee,gb-pc1|\
gnubee,gb-pc2)
- ucidef_set_led_netdev "lan1" "lan1" "green:lan1" "lan1"
- ucidef_set_led_netdev "lan2" "lan2" "green:lan2" "lan2"
+ ucidef_set_led_netdev "ethblack_act" "ethblack act" "green:ethblack_act" "ethblack" "tx rx"
+ ucidef_set_led_netdev "ethblue_act" "ethblue act" "green:ethblue_act" "ethblue" "tx rx"
;;
linksys,e5600)
ucidef_set_led_netdev "wan" "wan link" "blue:wan" "wan" "link"
uci add_list firewall.@zone[1].network='eth_data'
uci add_list firewall.@zone[1].network='eth_om'
;;
- gnubee,gb-pc1|\
+ gnubee,gb-pc1)
+ ucidef_set_interface_lan "ethblack ethblue"
+ ;;
gnubee,gb-pc2)
- ucidef_set_interface_lan "lan1 lan2"
+ ucidef_set_interface_lan "ethblack ethblue ethyellow"
;;
linksys,re6500|\
netgear,wac104|\
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_GPIO=y
CONFIG_I2C_MT7621=y
+CONFIG_ICPLUS_PHY=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IRQCHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_GPIO=y
CONFIG_I2C_MT7621=y
+CONFIG_ICPLUS_PHY=y
# CONFIG_INGENIC_CGU_JZ4760 is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IRQCHIP=y