+++ /dev/null
-/*
- * BSD LICENSE
- *
- * Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the names of the copyright holders nor the names of any
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "alfa-network,ac1200rm", "ralink,mt7620a-soc";
- model = "ALFA Network AC1200RM";
-
- aliases {
- led-boot = &led_wps;
- led-failsafe = &led_wps;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- wlan2g {
- label = "ac1200rm:green:wlan2g";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
-
- led_wps: wps {
- label = "ac1200rm:green:wps";
- gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&ehci {
- status = "okay";
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x28>;
- mediatek,portmap = "llllw";
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&gsw {
- mediatek,port4 = "ephy";
-};
-
-&ohci {
- status = "okay";
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
- ieee80211-freq-limit = <5000000 6000000>;
-
- led {
- led-sources = <2>;
- led-active-low;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "nd_sd", "spi refclk", "wled";
- ralink,function = "gpio";
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x1000>;
- };
-
- partition@31000 {
- label = "config";
- reg = <0x31000 0xf000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0xfb0000>;
- };
- };
- };
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "aigale,ai-br100", "ralink,mt7620a-soc";
- model = "Aigale Ai-BR100";
-
- aliases {
- led-boot = &led_wlan;
- led-failsafe = &led_wlan;
- led-running = &led_wlan;
- led-upgrade = &led_wlan;
- };
-
- leds {
- compatible = "gpio-leds";
-
- wan {
- label = "ai-br100:blue:wan";
- gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
- };
-
- led_wlan: wlan {
- label = "ai-br100:blue:wlan";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x20000>;
- read-only;
- };
-
- partition@20000 {
- label = "u-boot-env";
- reg = <0x20000 0x10000>;
- read-only;
- };
-
- factory: partition@30000 {
- label = "factory";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- partition@40000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x40000 0x7c0000>;
- };
- };
- };
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "llllw";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "tplink,archer-c2-v1", "ralink,mt7620a-soc";
- model = "TP-Link Archer C2 v1";
-
- aliases {
- led-boot = &led_wps;
- led-failsafe = &led_wps;
- led-running = &led_wps;
- led-upgrade = &led_wps;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartf", "wled", "ephy", "spi refclk";
- ralink,function = "gpio";
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- lan {
- label = "c2-v1:green:lan";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- };
-
- usb {
- label = "c2-v1:green:usb";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>;
- linux,default-trigger = "usbport";
- };
-
- led_wps: wps {
- label = "c2-v1:green:wps";
- gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- };
-
- wan {
- label = "c2-v1:green:wan";
- gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
- };
-
- wlan {
- label = "c2-v1:green:wlan";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset_wps {
- label = "reset_wps";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- rfkill {
- label = "rfkill";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- };
- };
-
- rtl8367rb {
- compatible = "realtek,rtl8367b", "rtl8367b";
- cpu_port = <6>;
- realtek,extif1 = <1 0 1 1 1 1 1 1 2>;
- mii-bus = <&mdio0>;
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x20000>;
- read-only;
- };
-
- partition@20000 {
- compatible = "tplink,firmware";
- label = "firmware";
- reg = <0x20000 0x7a0000>;
- };
-
- partition@7c0000 {
- label = "config";
- reg = <0x7c0000 0x10000>;
- read-only;
- };
-
- rom: partition@7d0000 {
- label = "rom";
- reg = <0x7d0000 0x10000>;
- read-only;
- };
-
- partition@7e0000 {
- label = "romfile";
- reg = <0x7e0000 0x10000>;
- read-only;
- };
-
- radio: partition@7f0000 {
- label = "radio";
- reg = <0x7f0000 0x10000>;
- read-only;
- };
- };
- };
-};
-
-ðernet {
- status = "okay";
- mtd-mac-address = <&rom 0xf100>;
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
-
- port@5 {
- status = "okay";
- mediatek,fixed-link = <1000 1 1 1>;
- phy-mode = "rgmii";
- };
-
- mdio0: mdio-bus {
- status = "okay";
- };
-};
-
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&radio 0>;
- mtd-mac-address = <&rom 0xf100>;
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&radio 0x8000>;
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "tplink,archer-c20i", "ralink,mt7620a-soc";
- model = "TP-Link Archer C20i";
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- leds {
- compatible = "gpio-leds";
- lan {
- label = "c20i:blue:lan";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- };
- usb {
- label = "c20i:blue:usb";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>;
- linux,default-trigger = "usbport";
- };
- wps {
- label = "c20i:blue:wps";
- gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- };
- wan {
- label = "c20i:blue:wan";
- gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
- };
- wlan {
- label = "c20i:blue:wlan";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- rfkill {
- label = "rfkill";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- };
- reset_wps {
- label = "reset_wps";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x20000>;
- read-only;
- };
-
- partition@20000 {
- compatible = "tplink,firmware";
- label = "firmware";
- reg = <0x20000 0x7a0000>;
- };
-
- partition@7c0000 {
- label = "config";
- reg = <0x7c0000 0x10000>;
- };
-
- rom: partition@7d0000 {
- label = "rom";
- reg = <0x7d0000 0x10000>;
- };
-
- partition@7e0000 {
- label = "romfile";
- reg = <0x7e0000 0x10000>;
- };
-
- radio: partition@7f0000 {
- label = "radio";
- reg = <0x7f0000 0x10000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd", "ephy", "spi refclk";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- pinctrl-names = "default";
- mtd-mac-address = <&rom 0xf100>;
- mediatek,portmap = "wllll";
- };
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-&gsw {
- mediatek,port4 = "ephy";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&radio 0>;
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&radio 32768>;
- ieee80211-freq-limit = <5000000 6000000>;
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- compatible = "tplink,archer-c20-v1", "ralink,mt7620a-soc";
- model = "TP-Link Archer C20 v1";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- leds {
- compatible = "gpio-leds";
-
- lan {
- label = "c20-v1:blue:lan";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- };
-
- led_power: power {
- label = "c20-v1:blue:power";
- gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
-
- usb {
- label = "c20-v1:blue:usb";
- gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>;
- linux,default-trigger = "usbport";
- };
-
- wan {
- label = "c20-v1:blue:wan";
- gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
- };
-
- wan_orange {
- label = "c20-v1:orange:wan";
- gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
- };
-
- wlan5g {
- label = "c20-v1:blue:wlan5g";
- gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
- };
-
- wlan2g {
- label = "c20-v1:blue:wlan2g";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "c20-v1:blue:wps";
- gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- rfkill {
- label = "rfkill";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- };
- };
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x20000>;
- read-only;
- };
-
- partition@20000 {
- compatible = "tplink,firmware";
- label = "firmware";
- reg = <0x20000 0x7a0000>;
- };
-
- partition@7c0000 {
- label = "config";
- reg = <0x7c0000 0x10000>;
- read-only;
- };
-
- rom: partition@7d0000 {
- label = "rom";
- reg = <0x7d0000 0x10000>;
- read-only;
- };
-
- partition@7e0000 {
- label = "romfile";
- reg = <0x7e0000 0x10000>;
- read-only;
- };
-
- radio: partition@7f0000 {
- label = "radio";
- reg = <0x7f0000 0x10000>;
- read-only;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartf", "wled", "ephy", "spi refclk", "wdt";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- pinctrl-names = "default";
- mtd-mac-address = <&rom 0xf100>;
- mediatek,portmap = "wllll";
- };
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-&gsw {
- mediatek,port4 = "ephy";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&radio 0>;
- mtd-mac-address = <&rom 0xf100>;
- mtd-mac-address-increment = <(-2)>;
- pinctrl-names = "default";
- pinctrl-0 = <&pa_pins>;
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&radio 0x8000>;
- ieee80211-freq-limit = <5000000 6000000>;
- mtd-mac-address = <&rom 0xf100>;
- mtd-mac-address-increment = <(-1)>;
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- compatible = "tplink,archer-c50-v1", "ralink,mt7620a-soc";
- model = "TP-Link Archer C50 v1";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- leds {
- compatible = "gpio-leds";
-
- lan {
- label = "c50:green:lan";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- };
-
- led_power: power {
- label = "c50:green:power";
- gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
-
- usb {
- label = "c50:green:usb";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>;
- linux,default-trigger = "usbport";
- };
-
- wan {
- label = "c50:green:wan";
- gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
- };
-
- wan_orange {
- label = "c50:orange:wan";
- gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
- };
-
- wlan5g {
- label = "c50:green:wlan5g";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
-
- wlan2g {
- label = "c50:green:wlan2g";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "c50:green:wps";
- gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- rfkill {
- label = "rfkill";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- }; };
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x20000>;
- read-only;
- };
-
- partition@20000 {
- compatible = "tplink,firmware";
- label = "firmware";
- reg = <0x20000 0x7a0000>;
- };
-
- partition@7c0000 {
- label = "config";
- reg = <0x7c0000 0x10000>;
- read-only;
- };
-
- rom: partition@7d0000 {
- label = "rom";
- reg = <0x7d0000 0x10000>;
- read-only;
- };
-
- partition@7e0000 {
- label = "romfile";
- reg = <0x7e0000 0x10000>;
- read-only;
- };
-
- radio: partition@7f0000 {
- label = "radio";
- reg = <0x7f0000 0x10000>;
- read-only;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "ephy", "spi refclk", "mdio", "wdt", "nd_sd";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- pinctrl-names = "default";
- mtd-mac-address = <&rom 0xf100>;
- mediatek,portmap = "wllll";
- };
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-&gsw {
- mediatek,port4 = "ephy";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&radio 0>;
- mtd-mac-address = <&rom 0xf100>;
- mtd-mac-address-increment = <(-2)>;
- pinctrl-names = "default";
- pinctrl-0 = <&pa_pins>;
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&radio 32768>;
- ieee80211-freq-limit = <5000000 6000000>;
- mtd-mac-address = <&rom 0xf100>;
- mtd-mac-address-increment = <(-1)>;
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "tplink,archer-mr200", "ralink,mt7620a-soc";
- model = "TP-Link Archer MR200";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- leds {
- compatible = "gpio-leds";
-
- lan {
- label = "mr200:white:lan";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- };
-
- wan {
- label = "mr200:white:wan";
- gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
- };
-
- led_power: power {
- label = "mr200:white:power";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- };
-
- 4g {
- label = "mr200:white:4g";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "mr200:white:wps";
- gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- };
-
- signal1 {
- label = "mr200:white:signal1";
- gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
- };
-
- signal2 {
- label = "mr200:white:signal2";
- gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
- };
-
- signal3 {
- label = "mr200:white:signal3";
- gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
- };
-
- signal4 {
- label = "mr200:white:signal4";
- gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
- };
-
- wlan {
- label = "mr200:white:wlan";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_RESTART>;
- };
-
- rfkill {
- label = "rfkill";
- gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_RFKILL>;
- };
- };
-
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- power_usb {
- gpio-export,name = "power_usb1";
- gpio-export,output = <1>;
- gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x20000>;
- read-only;
- };
-
- partition@20000 {
- compatible = "tplink,firmware";
- label = "firmware";
- reg = <0x20000 0x7b0000>;
- };
-
- rom: partition@7d0000 {
- label = "rom";
- reg = <0x7d0000 0x10000>;
- read-only;
- };
-
- partition@7e0000 {
- label = "romfile";
- reg = <0x7e0000 0x10000>;
- read-only;
- };
-
- radio: partition@7f0000 {
- label = "radio";
- reg = <0x7f0000 0x10000>;
- read-only;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd", "ephy", "spi refclk";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&rom 0xf100>;
- mediatek,portmap = "llll";
- };
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-&gsw {
- mediatek,port4 = "ephy";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&radio 0>;
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&radio 32768>;
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "bdcom,wap2100-sk", "ralink,mt7620a-soc";
- model = "BDCOM WAP2100-SK";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- leds {
- compatible = "gpio-leds";
-
- usb {
- label = "wap2100-sk:green:usb";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>;
- linux,default-trigger = "usbport";
- };
-
- led_power: wps {
- label = "wap2100-sk:green:wps";
- gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- };
-
- wlan2g {
- label = "wap2100-sk:green:wlan2g";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- wps {
- label = "wps";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- reset {
- label = "reset";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0xf70000>;
- };
- };
- };
-};
-
-&gpio0 {
- status = "okay";
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&sdhci {
- status = "okay";
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "llllw";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- wifi@0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
- ieee80211-freq-limit = <5000000 6000000>;
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- default {
- ralink,group = "spi refclk", "uartf", "wled";
- ralink,function = "gpio";
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "yukai,bocco", "ralink,mt7620a-soc";
- model = "YUKAI Engineering BOCCO";
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- s1 {
- gpio-export,name = "rec";
- gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
- };
- s2 {
- gpio-export,name = "play";
- gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
- };
- };
-
- sound {
- compatible = "simple-audio-card";
- simple-audio-card,name = "Audio-I2S";
- simple-audio-card,format = "i2s";
- simple-audio-card,bitclock-master = <&dailink0_master>;
- simple-audio-card,frame-master = <&dailink0_master>;
- simple-audio-card,widgets =
- "Headphone", "Headphones";
- simple-audio-card,routing =
- "Headphones", "HP_L",
- "Headphones", "HP_R";
- simple-audio-card,mclk-fs = <256>;
-
- simple-audio-card,cpu {
- sound-dai = <&i2s>;
- };
-
- dailink0_master: simple-audio-card,codec {
- sound-dai = <&codec>;
- };
- };
-};
-
-&gpio0 {
- status = "okay";
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&i2c {
- status = "okay";
-
- codec: wm8960@1a {
- #sound-dai-cells = <0>;
- compatible = "wlf,wm8960";
- reg = <0x1a>;
-
- wlf,shared-lrclk;
- };
-};
-
-&i2s {
- #sound-dai-cells = <0>;
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pcm_i2s_pins>;
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
-
-&pcm {
- status = "okay";
-};
-
-&gdma {
- status = "okay";
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi refclk", "rgmii1";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "llllw";
-};
-
-&gsw {
- ralink,port4 = "ephy";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
+++ /dev/null
-/*
- * Device Tree file for the Edimax BR-6478AC V2
- * based on Linksys E1700
- *
- * Copyright (C) 2016 Rohan Murch <rohan.murch@gmail.com>
- * Copyright (C) 2016 Hans Ulli Kroll <ulli.kroll@googlemail.com>
- * Copyright (C) 2017 James McKenzie <openwrt@madingley.org>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "edimax,br-6478ac-v2", "ralink,mt7620a-soc";
- model = "Edimax BR-6478AC v2";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- chosen {
- bootargs = "console=ttyS0,57600";
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset_wps {
- label = "reset_wps";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "br-6478ac-v2:white:power";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
- internet {
- label = "br-6478ac-v2:blue:internet";
- gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- };
- wlan {
- label = "br-6478ac-v2:blue:wlan";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- };
- usb {
- label = "br-6478ac-v2:blue:usb";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>;
- linux,default-trigger = "usbport";
- };
- };
-
-
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
- usb-power {
- gpio-export,name="usb-power";
- gpio-export,output=<1>;
- gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-
-&gpio2 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "cimage";
- reg = <0x50000 0x20000>;
- read-only;
- };
-
- partition@70000 {
- compatible = "edimax,uimage";
- label = "firmware";
- reg = <0x00070000 0x00790000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartf", "nd_sd";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- status = "okay";
- mtd-mac-address = <&factory 0x4>;
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
- mediatek,portmap = "wllll";
-
- port@5 {
- status = "okay";
- mediatek,fixed-link = <1000 1 1 1>;
- phy-mode = "rgmii";
- };
-
- mdio-bus {
- status = "okay";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- phy-mode = "rgmii";
- };
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- phy-mode = "rgmii";
- };
-
- phy2: ethernet-phy@2 {
- reg = <2>;
- phy-mode = "rgmii";
- };
-
- phy3: ethernet-phy@3 {
- reg = <3>;
- phy-mode = "rgmii";
- };
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- phy-mode = "rgmii";
- };
-
- phy1f: ethernet-phy@1f {
- reg = <0x1f>;
- phy-mode = "rgmii";
- };
- };
-};
-
-&gsw {
- mediatek,port4 = "gmac";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- wifi@0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
- mediatek,2ghz = <0>;
- };
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
+++ /dev/null
-/*
- * BSD LICENSE
- *
- * Copyright(c) 2017 Kristian Evensen <kristian.evensen@gmail.com>.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Broadcom Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "hnet,c108", "ralink,mt7620a-soc";
- model = "HNET C108";
-
- aliases {
- led-boot = &led_lan_green;
- led-failsafe = &led_lan_green;
- led-running = &led_lan_green;
- led-upgrade = &led_lan_green;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- gpio-export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- power_modem {
- gpio-export,name = "power_modem";
- gpio-export,output = <1>;
- gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- sdcard {
- label = "c108:green:sdcard";
- gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
- };
-
- modem_green {
- label = "c108:green:modem";
- gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- };
-
- modem_red {
- label = "c108:red:modem";
- gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- };
-
- lan_red {
- label = "c108:red:lan";
- gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
- };
-
- led_lan_green: lan_green {
- label = "c108:green:lan";
- gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- en25q128@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0xfb0000>;
- };
- };
- };
-};
-
-&sdhci {
- status = "okay";
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x28>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- default {
- ralink,group = "i2c", "uartf", "spi refclk", "ephy";
- ralink,function = "gpio";
- };
- };
-};
-
-&pcie {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620n.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "comfast,cf-wr800n", "ralink,mt7620n-soc";
- model = "Comfast CF-WR800N";
-
- aliases {
- led-boot = &led_wps;
- led-failsafe = &led_wps;
- led-running = &led_wps;
- led-upgrade = &led_wps;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- leds {
- compatible = "gpio-leds";
-
- ethernet {
- label = "cf-wr800n:white:ethernet";
- gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
- };
-
- wifi {
- label = "cf-wr800n:white:wifi";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
-
- led_wps: wps {
- label = "cf-wr800n:white:wps";
- gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&gpio0 {
- status = "okay";
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- default {
- ralink,group = "ephy", "wled", "spi refclk", "i2c";
- ralink,function = "gpio";
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "planex,cs-qr10", "ralink,mt7620a-soc";
- model = "Planex CS-QR10";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "cs-qr10:red:power";
- gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- s1 {
- label = "reset";
- gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- s2 {
- label = "wps";
- gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-};
-
-&gpio0 {
- status = "okay";
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&i2c {
- status = "okay";
-};
-
-&i2s {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pcm_i2s_pins>;
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
-
-&pcm {
- status = "okay";
-};
-
-&gdma {
- status = "okay";
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi refclk", "rgmii1";
- ralink,function = "gpio";
- };
- wdt {
- ralink,group = "wdt";
- ralink,function = "wdt refclk";
- };
- };
-};
-
-ðernet {
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "llllw";
-};
-
-&gsw {
- ralink,port4 = "ephy";
-};
-
-&sdhci {
- status = "okay";
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
+++ /dev/null
-/*
- * BSD LICENSE
- *
- * Copyright(c) 2017 Kristian Evensen <kristian.evensen@gmail.com>.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Broadcom Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "sanlinking,d240", "ralink,mt7620a-soc";
- model = "Sanlinking Technologies D240";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- gpio-export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- power_mpcie2 {
- gpio-export,name = "power_mpcie2";
- gpio-export,output = <1>;
- gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
- };
-
- power_mpcie1 {
- gpio-export,name = "power_mpcie1";
- gpio-export,output = <1>;
- gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "d240:blue:power";
- gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
- };
-
- usb {
- label = "d240:blue:usb";
- gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>;
- linux,default-trigger = "usbport";
- };
-
- air {
- label = "d240:blue:wifi";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- en25q128@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0xfb0000>;
- };
- };
- };
-};
-
-&sdhci {
- status = "okay";
- /* the pins function is already set during pinmux driver load */
- /delete-property/ pinctrl-0;
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "wllll";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- default {
- ralink,group = "i2c", "uartf", "wled", "spi refclk", "pa";
- ralink,function = "gpio";
- };
-
- /*
- * The sd function of the nd_sd group configures two of the
- * groups pins as gpios. The pins are used as PCIe reset/power.
- * Due to the driver load order, the pins are configured way to
- * late if triggered by the sd-card driver.
- * To not introduce another kind of driver load order
- * dependency and configure the pins as early as possible,
- * means during pinmux driver load.
- */
- gpio_sd {
- ralink,group = "nd_sd";
- ralink,function = "sd";
- };
- };
-};
-
-&pcie {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "planex,db-wrt01", "ralink,mt7620a-soc";
- model = "Planex DB-WRT01";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "db-wrt01:orange:power";
- gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- s1 {
- label = "wps";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "spi refclk", "rgmii1";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "llllw";
-};
-
-&gsw {
- mediatek,port4 = "ephy";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "dlink,dch-m225", "ralink,mt7620a-soc";
- model = "D-Link DCH-M225";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- wps {
- label = "wps";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- };
-
- reset {
- label = "reset";
- gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "dch-m225:green:power";
- gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
-
- status {
- label = "dch-m225:red:status";
- gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
- };
- };
-
- sound {
- compatible = "simple-audio-card";
- simple-audio-card,name = "Audio-I2S";
- simple-audio-card,format = "i2s";
- simple-audio-card,bitclock-master = <&dailink0_master>;
- simple-audio-card,frame-master = <&dailink0_master>;
- simple-audio-card,widgets =
- "Headphone", "Headphones";
- simple-audio-card,routing =
- "Headphones", "HP_L",
- "Headphones", "HP_R";
- simple-audio-card,mclk-fs = <256>;
- simple-audio-card,hp-det-gpio = <&gpio0 14 GPIO_ACTIVE_LOW>;
-
- simple-audio-card,cpu {
- sound-dai = <&i2s>;
- };
-
- dailink0_master: simple-audio-card,codec {
- sound-dai = <&codec>;
- };
- };
-};
-
-&gpio0 {
- status = "okay";
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&i2c {
- status = "okay";
-
- codec: wm8960@1a {
- #sound-dai-cells = <0>;
- compatible = "wlf,wm8960";
- reg = <0x1a>;
-
- wlf,shared-lrclk;
- };
-};
-
-&i2s {
- #sound-dai-cells = <0>;
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&mdio_refclk_pins>;
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <80000000>;
- m25p,fast-read;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x4000>;
- read-only;
- };
-
- factory: partition@34000 {
- label = "factory";
- reg = <0x34000 0x4000>;
- read-only;
- };
-
- nvram: partition@38000 {
- label = "nvram";
- reg = <0x38000 0x8000>;
- read-only;
- };
-
- partition@40000 {
- label = "devconf";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "upgrade_rec";
- reg = <0x50000 0x100000>;
- read-only;
- };
-
- partition@150000 {
- compatible = "seama";
- label = "firmware";
- reg = <0x150000 0x6b0000>;
- };
- };
- };
-};
-
-&gdma {
- status = "okay";
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "wdt", "rgmii1";
- ralink,function = "gpio";
- };
-
- gpio_i2s {
- ralink,group = "uartf";
- ralink,function = "gpio i2s";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&gsw {
- ralink,port4 = "ephy";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pa_pins>;
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- compatible = "dlink,dir-510l", "ralink,mt7620a-soc";
- model = "D-Link DIR-510L";
-
- aliases {
- led-boot = &led_status;
- led-failsafe = &led_status;
- led-running = &led_status;
- led-upgrade = &led_status;
- };
-
- chosen {
- bootargs = "console=ttyS1,57600";
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_status: status {
- label = "dir-510l:green:status";
- gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
- };
-
- status-red {
- label = "dir-510l:red:status";
- gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
- };
-
- };
-};
-
-ðernet {
- mediatek,portmap = "llllw";
-};
-
-&uart {
- status = "okay";
-};
-
-&gpio0 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <50000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "jboot";
- reg = <0x0 0x10000>;
- read-only;
- };
-
- partition@10000 {
- label = "recovery";
- reg = <0x10000 0x200000>;
- read-only;
- };
-
- partition@210000 {
- compatible = "amit,jimage";
- label = "firmware";
- reg = <0x210000 0xde0000>;
- };
-
- config: partition@ff0000 {
- label = "config";
- reg = <0xff0000 0x10000>;
- read-only;
- };
- };
- };
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- mt76x0e@0,0 {
- reg = <0x0000 0 0 0 0>;
- mtd-mac-address = <&config 0xe490>;
- mtd-mac-address-increment = <(2)>;
- mediatek,mtd-eeprom = <&config 0xe05d>;
- };
-};
-
-&gsw {
- mediatek,port4 = "ephy";
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- default {
- ralink,group = "i2c", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "dlink,dir-810l", "ralink,mt7620a-soc";
- model = "D-Link DIR-810L";
-
- aliases {
- led-boot = &led_power_green;
- led-failsafe = &led_power_green;
- led-running = &led_power_green;
- led-upgrade = &led_power_green;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power_green: power {
- label = "dir-810l:green:power";
- gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
- };
-
- wan {
- label = "dir-810l:orange:wan";
- gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
- };
-
- power2 {
- label = "dir-810l:orange:power";
- gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- factory5g: partition@50000 {
- label = "factory5g";
- reg = <0x50000 0x10000>;
- read-only;
- };
-
- partition@60000 {
- label = "Wolf_Config";
- reg = <0x60000 0x10000>;
- read-only;
- };
-
- partition@70000 {
- label = "MyDlink";
- reg = <0x70000 0x80000>;
- read-only;
- };
-
- partition@e0000 {
- label = "Jffs2";
- reg = <0xe0000 0x80000>;
- read-only;
- };
-
- partition@170000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x170000 0x690000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "mdio", "rgmii1", "i2c", "wled", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x28>;
- mediatek,portmap = "llllw";
-};
-
-&gsw {
- mediatek,port4 = "ephy";
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
-};
-
-&pcie {
- status = "okay";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&pcie0 {
- wifi@0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
- ieee80211-freq-limit = <5000000 6000000>;
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620n.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "dlink,dwr-116-a1", "ralink,mt7620n-soc";
- model = "D-Link DWR-116 A1/A2";
-
- aliases {
- led-boot = &led_status;
- led-failsafe = &led_status;
- led-running = &led_status;
- led-upgrade = &led_status;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- wps {
- label = "wps";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- reset {
- label = "reset";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_status: status {
- label = "dwr-116-a1:green:status";
- gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
- };
-
- wifi {
- label = "dwr-116-a1:green:wifi";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <50000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "jboot";
- reg = <0x0 0x10000>;
- read-only;
- };
-
- partition@10000 {
- compatible = "amit,jimage";
- label = "firmware";
- reg = <0x10000 0x7e0000>;
- };
-
- config: partition@7f0000 {
- label = "config";
- reg = <0x7f0000 0x10000>;
- read-only;
- };
- };
- };
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- default {
- ralink,group = "i2c", "wled";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mediatek,portmap = "llllw";
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "dlink,dwr-118-a1", "ralink,mt7620a-soc";
- model = "D-Link DWR-118 A1";
-
- aliases {
- led-boot = &led_internet;
- led-failsafe = &led_internet;
- led-upgrade = &led_internet;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- wps {
- label = "wps";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- reset {
- label = "reset";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- wan {
- label = "dwr-118-a1:green:wan";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
-
- led_internet: internet {
- label = "dwr-118-a1:green:internet";
- gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
- };
-
- lan {
- label = "dwr-118-a1:green:lan";
- gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
- };
-
- wlan2g {
- label = "dwr-118-a1:green:wlan2g";
- gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- };
-
- usb {
- label = "dwr-118-a1:green:usb";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>;
- linux,default-trigger = "usbport";
- };
- };
-
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- usb {
- gpio-export,name = "usb";
- gpio-export,output = <0>;
- gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <80000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "jboot";
- reg = <0x0 0x10000>;
- read-only;
- };
-
- partition@10000 {
- compatible = "amit,jimage";
- label = "firmware";
- reg = <0x10000 0xfe0000>;
- };
-
- config: partition@ff0000 {
- label = "config";
- reg = <0xff0000 0x10000>;
- read-only;
- };
- };
- };
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- default {
- ralink,group = "ephy", "uartf", "spi refclk", "wled";
- ralink,function = "gpio";
- };
- };
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- wifi@0,0 {
- reg = <0x0000 0 0 0 0>;
- mtd-mac-address = <&config 0xe496>;
- mtd-mac-address-increment = <(2)>;
- mediatek,mtd-eeprom = <&config 0xe083>;
-
- led {
- led-sources = <0>;
- led-active-low;
- };
- };
-};
-
-ðernet {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
-
- port@4 {
- status = "okay";
- phy-handle = <&phy4>;
- phy-mode = "rgmii";
- };
-
- port@5 {
- status = "okay";
- phy-handle = <&phy5>;
- phy-mode = "rgmii";
- };
-
- mdio-bus {
- status = "okay";
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- phy-mode = "rgmii-rxid";
- };
-
- phy5: ethernet-phy@5 {
- reg = <5>;
- phy-mode = "rgmii-rxid";
- };
- };
-};
-
-&gsw {
- mediatek,port4 = "gmac";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "dlink,dwr-118-a2", "ralink,mt7620a-soc";
- model = "D-Link DWR-118 A2";
-
- aliases {
- led-boot = &led_internet;
- led-failsafe = &led_internet;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- wps {
- label = "wps";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- reset {
- label = "reset";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- wan {
- label = "dwr-118-a2:green:wan";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
-
- led_internet: internet {
- label = "dwr-118-a2:green:internet";
- gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
- };
-
- lan {
- label = "dwr-118-a2:green:lan";
- gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
- };
-
- wlan2g {
- label = "dwr-118-a2:green:wlan2g";
- gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- };
-
- usb {
- label = "dwr-118-a2:green:usb";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>;
- linux,default-trigger = "usbport";
- };
- };
-
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- usb {
- gpio-export,name = "usb";
- gpio-export,output = <1>;
- gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <50000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "jboot";
- reg = <0x0 0x10000>;
- read-only;
- };
-
- partition@10000 {
- compatible = "amit,jimage";
- label = "firmware";
- reg = <0x10000 0xfe0000>;
- };
-
- config: partition@ff0000 {
- label = "config";
- reg = <0xff0000 0x10000>;
- read-only;
- };
- };
- };
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- default {
- ralink,group = "ephy", "uartf", "spi refclk", "wled";
- ralink,function = "gpio";
- };
- };
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- wifi@0,0 {
- reg = <0x0000 0 0 0 0>;
- ieee80211-freq-limit = <5000000 6000000>;
- mtd-mac-address = <&config 0xe4a8>;
- mtd-mac-address-increment = <(2)>;
-
- led {
- led-sources = <2>;
- led-active-low;
- };
- };
-};
-
-ðernet {
- status = "okay";
- mediatek,portmap = "wllll";
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii1_pins &mdio_pins>;
-
- port@4 {
- status = "okay";
- phy-handle = <&phy0>;
- phy-mode = "rgmii";
- };
-
- mdio-bus {
- status = "okay";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- phy-mode = "rgmii-rxid";
- };
- };
-};
-
-&gsw {
- mediatek,port4 = "gmac";
- mediatek,ephy-base-address = /bits/ 16 < 2 >;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620n.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "dlink,dwr-921-c1", "ralink,mt7620n-soc";
- model = "D-Link DWR-921 C1";
-
- aliases {
- led-boot = &led_sstrenghg;
- led-failsafe = &led_sstrenghg;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- wps {
- label = "wps";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- reset {
- label = "reset";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- sms {
- label = "dwr-921-c1:green:sms";
- gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- };
-
- lan {
- label = "dwr-921-c1:green:lan";
- gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
- };
-
- led_sstrenghg: sstrengthg {
- label = "dwr-921-c1:green:sigstrength";
- gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
- };
-
- sstrengthr {
- label = "dwr-921-c1:red:sigstrength";
- gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
- };
-
- 4g {
- label = "dwr-921-c1:green:4g";
- gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
- };
-
- 3g {
- label = "dwr-921-c1:green:3g";
- gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
- };
-
- wifi {
- label = "dwr-921-c1:green:wifi";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- lte_modem_enable {
- gpio-export,name = "lte_modem_enable";
- gpio-export,output = <1>;
- gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "jboot";
- reg = <0x0 0x10000>;
- read-only;
- };
-
- partition@10000 {
- compatible = "amit,jimage";
- label = "firmware";
- reg = <0x10000 0xfe0000>;
- };
-
- config: partition@ff0000 {
- label = "config";
- reg = <0xff0000 0x10000>;
- read-only;
- };
- };
- };
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-ðernet {
- port@4 {
- status = "okay";
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- default {
- ralink,group = "spi refclk", "i2c", "ephy", "wled";
- ralink,function = "gpio";
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "mt7620n.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "dlink,dwr-922-e2", "ralink,mt7620n-soc";
- model = "D-Link DWR-922 E2";
-
- aliases {
- led-boot = &sstrengthg;
- led-failsafe = &sstrengthg;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- wps {
- label = "wps";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- reset {
- label = "reset";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- led-boot = &sstrengthg;
-
- sms {
- label = "dwr-922-e2:green:sms";
- gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- };
-
- lan {
- label = "dwr-922-e2:green:lan";
- gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
- };
-
- sstrengthg: sstrengthg {
- label = "dwr-922-e2:green:sigstrength";
- gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
- };
-
- sstrengthr {
- label = "dwr-922-e2:red:sigstrength";
- gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
- };
-
- 4g {
- label = "dwr-922-e2:green:4g";
- gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
- };
-
- 3g {
- label = "dwr-922-e2:green:3g";
- gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
- };
-
- wifi {
- label = "dwr-922-e2:green:wifi";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- lte_modem_enable {
- gpio-export,name = "lte_modem_enable";
- gpio-export,output = <1>;
- gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "jboot";
- reg = <0x0 0x10000>;
- read-only;
- };
-
- partition@10000 {
- compatible = "amit,jimage";
- label = "firmware";
- reg = <0x10000 0xfe0000>;
- };
-
- config: partition@ff0000 {
- label = "config";
- reg = <0xff0000 0x10000>;
- read-only;
- };
- };
- };
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-ðernet {
- port@4 {
- status = "okay";
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- default {
- ralink,group = "spi refclk", "i2c", "ephy", "wled";
- ralink,function = "gpio";
- };
- };
-};
+++ /dev/null
-/*
- * Device Tree file for the Linksys E1700
- *
- * Copyright (C) 2014 Imre Kaloz <kaloz@openwrt.org>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "linksys,e1700", "ralink,mt7620a-soc";
- model = "Linksys E1700";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "e1700:green:power";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- };
-
- wan {
- label = "e1700:green:wps";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "config";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- status = "okay";
- mtd-mac-address = <&factory 0x28>;
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
-
- port@5 {
- status = "okay";
- mediatek,fixed-link = <1000 1 1 1>;
- phy-mode = "rgmii";
- };
-
- mdio-bus {
- status = "okay";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- phy-mode = "rgmii";
- };
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- phy-mode = "rgmii";
- };
-
- phy2: ethernet-phy@2 {
- reg = <2>;
- phy-mode = "rgmii";
- };
-
- phy3: ethernet-phy@3 {
- reg = <3>;
- phy-mode = "rgmii";
- };
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- phy-mode = "rgmii";
- };
-
- phy1f: ethernet-phy@1f {
- reg = <0x1f>;
- phy-mode = "rgmii";
- };
- };
-};
-
-&gsw {
- mediatek,port4 = "gmac";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-/dts-v1/;
-
-#include "EW-747x.dtsi"
-
-/ {
- compatible = "edimax,ew-7476rpc", "ralink,mt7620a-soc";
- model = "Edimax EW-7476RPC";
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "ew-7476rpc:green:power";
- gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
- };
-
- lan {
- label = "ew-7476rpc:green:lan";
- gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
- };
-
- wlan2g {
- label = "ew-7476rpc:blue:wlan2g";
- gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy1radio";
- };
-
- wlan5g {
- label = "ew-7476rpc:blue:wlan5g";
- gpios = <&gpio2 31 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy0radio";
- };
-
- wps {
- label = "ew-7476rpc:green:wps";
- gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
- };
-
- crossband {
- label = "ew-7476rpc:green:crossband";
- gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-/dts-v1/;
-
-#include "EW-747x.dtsi"
-
-/ {
- compatible = "edimax,ew-7478ac", "ralink,mt7620a-soc";
- model = "Edimax EW-7478AC";
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "ew-7478ac:green:power";
- gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
- };
-
- lan {
- label = "ew-7478ac:green:lan";
- gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
- };
-
- wlan2g {
- label = "ew-7478ac:blue:wlan2g";
- gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy1radio";
- };
-
- wlan5g {
- label = "ew-7478ac:blue:wlan5g";
- gpios = <&gpio2 31 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy0radio";
- };
-
- wps {
- label = "ew-7478ac:green:wps";
- gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
- };
-
- crossband {
- label = "ew-7478ac:green:crossband";
- gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "edimax,ew-7478apc", "ralink,mt7620a-soc";
- model = "Edimax EW-7478APC";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- chosen {
- bootargs = "console=ttyS0,57600";
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset_wps {
- label = "reset_wps";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "ew-7478apc:white:power";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
-
- internet {
- label = "ew-7478apc:blue:internet";
- gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- };
-
- wlan {
- label = "ew-7478apc:blue:wlan";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- };
-
- usb {
- label = "ew-7478apc:blue:usb";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>;
- linux,default-trigger = "usbport";
- };
- };
-};
-
-&gpio2 {
- status = "okay";
-
- enable_usb_power {
- gpio-hog;
- line-name = "enable USB power";
- gpios = <5 GPIO_ACTIVE_HIGH>;
- output-high;
- };
-};
-
-&spi0 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "cimage";
- reg = <0x50000 0x20000>;
- read-only;
- };
-
- partition@70000 {
- compatible = "edimax,uimage";
- label = "firmware";
- reg = <0x00070000 0x00790000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartf", "nd_sd";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- status = "okay";
- mtd-mac-address = <&factory 0x4>;
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
- mediatek,portmap = "wllll";
-
- port@5 {
- status = "okay";
- mediatek,fixed-link = <1000 1 1 1>;
- phy-mode = "rgmii";
- };
-
- mdio-bus {
- status = "okay";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- phy-mode = "rgmii";
- };
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- phy-mode = "rgmii";
- };
-
- phy2: ethernet-phy@2 {
- reg = <2>;
- phy-mode = "rgmii";
- };
-
- phy3: ethernet-phy@3 {
- reg = <3>;
- phy-mode = "rgmii";
- };
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- phy-mode = "rgmii";
- };
-
- phy1f: ethernet-phy@1f {
- reg = <0x1f>;
- phy-mode = "rgmii";
- };
- };
-};
-
-&gsw {
- mediatek,port4 = "gmac";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- wifi@0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
- mediatek,2ghz = <0>;
- };
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "ralink,mt7620a-soc";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- chosen {
- bootargs = "console=ttyS0,57600";
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset_wps {
- label = "reset_wps";
- gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- switch_high {
- label = "switch high";
- gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- linux,input-type = <EV_SW>;
- };
-
- switch_off {
- label = "switch off";
- gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_1>;
- linux,input-type = <EV_SW>;
- };
- };
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "cimage";
- reg = <0x50000 0x20000>;
- read-only;
- };
-
- partition@70000 {
- compatible = "edimax,uimage";
- label = "firmware";
- reg = <0x00070000 0x00790000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartf", "nd_sd", "rgmii2";
- ralink,function = "gpio";
- };
- };
-
- phy_reset_pins: phy-reset {
- gpio {
- ralink,group = "spi refclk";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
-
- status = "okay";
- mtd-mac-address = <&factory 0x4>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii1_pins &mdio_pins &phy_reset_pins>;
-
- mediatek,portmap = "l";
- mediatek,mdio-mode = <1>;
-
- phy-reset-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- phy-reset-duration = <30>;
-
- port@5 {
- status = "okay";
- mediatek,fixed-link = <1000 1 1 1>;
- phy-mode = "rgmii";
- };
-
- mdio-bus {
- status = "okay";
-
- phy0: ethernet-phy@0 {
- status = "disabled";
- reg = <0>;
- phy-mode = "rgmii";
- };
-
- phy1: ethernet-phy@1 {
- status = "disabled";
- reg = <1>;
- phy-mode = "rgmii";
- };
-
- phy2: ethernet-phy@2 {
- status = "disabled";
- reg = <2>;
- phy-mode = "rgmii";
- };
-
- phy3: ethernet-phy@3 {
- status = "disabled";
- reg = <3>;
- phy-mode = "rgmii";
- };
-
- phy4: ethernet-phy@4 {
- status = "disabled";
- reg = <4>;
- phy-mode = "rgmii";
- };
- };
-};
-
-&gsw {
- mediatek,port5 = "gmac";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- wifi@0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
- mediatek,2ghz = <0>;
- };
-};
+++ /dev/null
-/*
- * Device Tree file for the Netgear EX2700
- *
- * Copyright (C) 2016 Joseph C. Lehner <joseph.c.lehner@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "netgear,ex2700", "ralink,mt7620a-soc";
- model = "Netgear EX2700";
-
- aliases {
- led-boot = &led_power_green;
- led-failsafe = &led_power_green;
- led-running = &led_power_green;
- led-upgrade = &led_power_green;
- };
-
- chosen {
- bootargs = "console=ttyS0,57600";
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power_green: power_g {
- label = "ex2700:green:power";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
-
- power_r {
- label = "ex2700:red:power";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
-
- device_g {
- label = "ex2700:green:device";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- };
-
- device_r {
- label = "ex2700:red:device";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- };
-
- router_g {
- label = "ex2700:green:router";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- };
-
- router_r {
- label = "ex2700:red:router";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "ex2700:green:wps";
- gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-};
-
-&gpio0 {
- status = "okay";
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- partition@40000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x40000 0x3b0000>;
- };
-
- art: partition@3f0000 {
- label = "art";
- reg = <0x3f0000 0x10000>;
- read-only;
- };
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&art 0x0>;
-};
-
-&wmac {
- mtd-mac-address = <&art 0x6>;
- ralink,mtd-eeprom = <&art 0x1000>;
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- default {
- ralink,group = "i2c", "uartf", "spi refclk";
- ralink,function = "gpio";
- };
- };
-};
+++ /dev/null
-/* This file is released into the public domain */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "mt7620a.dtsi"
-
-/ {
- compatible = "netgear,ex3700", "ralink,mt7620a-soc";
- model = "Netgear EX3700/EX3800";
-
- aliases {
- led-boot = &led_power_green;
- led-failsafe = &led_power_green;
- led-running = &led_power_green;
- led-upgrade = &led_power_green;
- };
-
- chosen {
- bootargs = "console=ttyS0,57600";
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power_green: power_g {
- label = "ex3700:green:power";
- gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
-
- power_a {
- label = "ex3700:amber:power";
- gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
- };
-
- router_g {
- label = "ex3700:green:router";
- gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
- };
-
- router_r {
- label = "ex3700:red:router";
- gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
- };
-
- device_g {
- label = "ex3700:green:device";
- gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
- };
-
- device_r {
- label = "ex3700:red:device";
- gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "ex3700:green:wps";
- gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-};
-
-&gpio0 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "config";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x790000>;
- };
-
- partition@7e0000 {
- label = "board_data";
- reg = <0x7e0000 0x10000>;
- read-only;
- };
-
- partition@7f0000 {
- label = "nvram";
- reg = <0x7f0000 0x10000>;
- read-only;
- };
- };
- };
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0 >;
- mediatek,mtd-eeprom = <&factory 0x8000>;
- ieee80211-freq-limit = <5000000 6000000>;
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x28>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0x0>;
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- default {
- ralink,group = "i2c", "rgmii2", "spi refclk";
- ralink,function = "gpio";
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "glinet,gl-mt300a", "ralink,mt7620a-soc";
- model = "GL-MT300A";
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- leds {
- compatible = "gpio-leds";
-
- wan {
- label = "gl-mt300a:wan";
- gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
- };
-
- lan {
- label = "gl-mt300a:lan";
- gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
- };
-
- wlan {
- label = "gl-mt300a:wlan";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
-
- usb {
- label = "gl-mt300a:usb";
- gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
- reset {
- label = "reset";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- BTN_0 {
- label = "BTN_0";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- };
-
- BTN_1 {
- label = "BTN_1";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_1>;
- };
- };
-};
-
-&gpio0 {
- status = "okay";
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0xf80000>;
- };
-
- partition@ff0000 {
- label = "art";
- reg = <0xff0000 0x10000>;
- };
- };
- };
-};
-
-&sdhci {
- status = "okay";
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4000>;
- mediatek,portmap = "wllll";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "wled","ephy","uartf","i2c";
- ralink,function = "gpio";
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "glinet,gl-mt300n", "ralink,mt7620a-soc";
- model = "GL-MT300N";
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- leds {
- compatible = "gpio-leds";
-
- wan {
- label = "gl-mt300n:wan";
- gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
- };
-
- lan {
- label = "gl-mt300n:lan";
- gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
- };
-
- wlan {
- label = "gl-mt300n:wlan";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
- reset {
- label = "reset";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- BTN_0 {
- label = "BTN_0";
- gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- };
-
- BTN_1 {
- label = "BTN_1";
- gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_1>;
- };
- };
-};
-
-&gpio0 {
- status = "okay";
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0xf80000>;
- };
-
- partition@ff0000 {
- label = "art";
- reg = <0xff0000 0x10000>;
- };
- };
- };
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4000>;
- mediatek,portmap = "wllll";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "wled","ephy","i2c";
- ralink,function = "gpio";
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "glinet,gl-mt750", "ralink,mt7620a-soc";
- model = "GL-MT750";
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- leds {
- compatible = "gpio-leds";
-
- wan {
- label = "gl-mt750:wan";
- gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
- };
-
- lan {
- label = "gl-mt750:lan";
- gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
- };
-
- wlan {
- label = "gl-mt750:wlan";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
- reset {
- label = "reset";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- BTN_0 {
- label = "BTN_0";
- gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- };
-
- BTN_1 {
- label = "BTN_1";
- gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_1>;
- };
- };
-};
-
-&gpio0 {
- status = "okay";
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0xf80000>;
- };
-
- partition@ff0000 {
- label = "art";
- reg = <0xff0000 0x10000>;
- };
- };
- };
-};
-
-&sdhci {
- status = "okay";
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4000>;
- mediatek,portmap = "llllw";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "wled","ephy","uartf";
- ralink,function = "gpio";
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "HC5X61.dtsi"
-
-/ {
- compatible = "hiwifi,hc5661", "hiwifi,hc5x61", "ralink,mt7620a-soc";
- model = "HiWiFi HC5661";
-
- aliases {
- led-boot = &led_system;
- led-failsafe = &led_system;
- led-running = &led_system;
- led-upgrade = &led_system;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_system: system {
- label = "hc5661:blue:system";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
-
- internet {
- label = "hc5661:blue:internet";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
-
- wlan2g {
- label = "hc5661:blue:wlan2g";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
-
- wlan5g {
- label = "hc5661:blue:wlan5g";
- gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "HC5X61.dtsi"
-
-/ {
- compatible = "hiwifi,hc5761", "hiwifi,hc5x61", "ralink,mt7620a-soc";
- model = "HiWiFi HC5761";
-
- aliases {
- led-boot = &led_system;
- led-failsafe = &led_system;
- led-running = &led_system;
- led-upgrade = &led_system;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_system: system {
- label = "hc5761:blue:system";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
-
- internet {
- label = "hc5761:blue:internet";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
-
- wlan2g {
- label = "hc5761:blue:wlan2g";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
-
- wlan5g {
- label = "hc5761:blue:wlan5g";
- gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
- ieee80211-freq-limit = <5000000 6000000>;
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "HC5X61.dtsi"
-
-/ {
- compatible = "hiwifi,hc5861", "hiwifi,hc5x61", "ralink,mt7620a-soc";
- model = "HiWiFi HC5861";
-
- aliases {
- led-boot = &led_system;
- led-failsafe = &led_system;
- led-running = &led_system;
- led-upgrade = &led_system;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_system: system {
- label = "hc5861:blue:system";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
-
- wlan2g {
- label = "hc5861:blue:wlan2g";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
-
- internet {
- label = "hc5861:blue:internet";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
-
- wlan5g {
- label = "hc5861:blue:wlan5g";
- gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- };
-
- turbo {
- label = "hc5861:blue:turbo";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- usbpower {
- gpio-export,name = "usbpower";
- gpio-export,output = <0>;
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- };
-
- sdpower {
- gpio-export,name = "sdpower";
- gpio-export,output = <0>;
- gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-ðernet {
- status = "okay";
- mtd-mac-address = <&factory 0x4>;
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii1_pins &mdio_pins>;
- mediatek,portmap = "wllll";
-
- port@5 {
- status = "okay";
- phy-handle = <&phy5>;
- phy-mode = "rgmii";
- };
-
- mdio-bus {
- status = "okay";
-
- phy5: ethernet-phy@5 {
- reg = <5>;
- phy-mode = "rgmii";
- };
- };
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- wifi@0,0 {
- compatible = "pci14c3,7662";
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
- ieee80211-freq-limit = <5000000 6000000>;
- };
-};
+++ /dev/null
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "hiwifi,hc5x61", "ralink,mt7620a-soc";
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- usbpower {
- gpio-export,name = "usbpower";
- gpio-export,output = <1>;
- gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&sysc {
- ralink,gpiomux = "i2c", "jtag";
- ralink,uartmux = "gpio";
- ralink,wdtmux = <1>;
-};
-
-&gpio0 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0xf80000>;
- };
-
- partition@fd0000 {
- label = "hwf_config";
- reg = <0xfd0000 0x10000>;
- read-only;
- };
-
- bdinfo: partition@fe0000 {
- label = "bdinfo";
- reg = <0xfe0000 0x10000>;
- read-only;
- };
-
- partition@ff0000 {
- label = "backup";
- reg = <0xff0000 0x10000>;
- read-only;
- };
- };
- };
-};
-
-ðernet {
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "wllll";
-};
-
-&sdhci {
- status = "okay";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pa_pins>;
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "uartf", "wled";
- ralink,function = "gpio";
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "head-weblink,hdrm200", "ralink,mt7620a-soc";
- model = "Head Weblink HDRM200";
-
- aliases {
- led-boot = &led_system;
- led-failsafe = &led_system;
- led-running = &led_system;
- led-upgrade = &led_system;
- };
-
- chosen {
- bootargs = "console=ttyS1,57600";
- };
-
- leds {
- compatible = "gpio-leds";
-
- rssi {
- label = "hdrm200:red:rssi";
- gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
- };
-
- led_system: system {
- label = "hdrm200:green:system";
- gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
- };
-
- air {
- label = "hdrm200:green:wifi";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- wps {
- label = "wps";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- reset {
- label = "reset";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- firmware: partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0xfb0000>;
- };
- };
- };
-};
-
-&gpio0 {
- status = "okay";
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&sdhci {
- status = "okay";
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-ðernet {
- status = "okay";
-
- mtd-mac-address = <&factory 0x4>;
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
-
- port@4 {
- status = "okay";
- phy-handle = <&phy4>;
- phy-mode = "rgmii";
- };
-
- port@5 {
- status = "okay";
- phy-handle = <&phy5>;
- phy-mode = "rgmii";
- };
-
- mdio-bus {
- status = "okay";
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- phy-mode = "rgmii";
- };
-
- phy5: ethernet-phy@5 {
- reg = <5>;
- phy-mode = "rgmii";
- };
- };
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- default {
- ralink,group = "i2c", "uartf", "pa", "spi refclk",
- "wled";
- ralink,function = "gpio";
- };
- };
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- wifi@0,0 {
- compatible = "mediatek,mt76";
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
- ieee80211-freq-limit = <5000000 6000000>;
- };
-};
-
-&uart {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "phicomm,k2g", "ralink,mt7620a-soc";
- model = "Phicomm K2G";
-
- aliases {
- led-boot = &led_blue;
- led-failsafe = &led_blue;
- led-running = &led_blue;
- led-upgrade = &led_blue;
- serial0 = &uartlite;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_blue: blue {
- label = "k2g:blue:status";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- };
-
- yellow {
- label = "k2g:yellow:status";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
-
- red {
- label = "k2g:red:status";
- gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- reg = <0x0 0x30000>;
- label = "u-boot";
- read-only;
- };
-
- partition@30000 {
- reg = <0x30000 0x10000>;
- label = "u-boot-env";
- read-only;
- };
-
- factory: partition@40000 {
- reg = <0x40000 0x10000>;
- label = "factory";
- read-only;
- };
-
- partition@50000 {
- reg = <0x50000 0x50000>;
- label = "permanent_config";
- read-only;
- };
-
- partition@a0000 {
- compatible = "denx,uimage";
- reg = <0xa0000 0x760000>;
- label = "firmware";
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii2_pins &mdio_pins>;
- mtd-mac-address = <&factory 0x28>;
- mediatek,portmap = "llllw";
-
- port@5 {
- status = "okay";
- phy-handle = <&phy5>;
- phy-mode = "rgmii";
- };
-
- mdio-bus {
- status = "okay";
-
- phy5: ethernet-phy@5 {
- reg = <5>;
- phy-mode = "rgmii";
- };
- };
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
- ieee80211-freq-limit = <5000000 6000000>;
- };
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pa_pins>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "lava,lr-25g001", "ralink,mt7620a-soc";
- model = "LAVA LR-25G001";
-
- aliases {
- led-boot = &led_status;
- led-failsafe = &led_status;
- led-running = &led_status;
- led-upgrade = &led_status;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- wps {
- label = "wps";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- reset {
- label = "reset";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_status: status {
- label = "lr-25g001:green:status";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
-
- wifi2g {
- label = "lr-25g001:green:wifi2g";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
-
- wifi5g {
- label = "lr-25g001:green:wifi5g";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- usbpower {
- gpio-export,name = "usbpower";
- gpio-export,output = <1>;
- gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&gpio0 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "jboot";
- reg = <0x0 0x10000>;
- read-only;
- };
-
- partition@10000 {
- compatible = "amit,jimage";
- label = "firmware";
- reg = <0x10000 0xfe0000>;
- };
-
- config: partition@ff0000 {
- label = "config";
- reg = <0xff0000 0x10000>;
- read-only;
- };
- };
- };
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-ðernet {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
-
- port@5 {
- status = "okay";
- phy-mode = "rgmii";
- mediatek,fixed-link = <1000 1 1 1>;
- };
-
- mdio-bus {
- status = "okay";
- mediatek,mdio-mode = <1>;
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- phy-mode = "rgmii";
- qca,ar8327-initvals = <
- 0x04 0x87300000 /* PORT0 PAD MODE CTRL */
- 0x0c 0x00000000 /* PORT6 PAD MODE CTRL */
- 0x7c 0x0000007e /* PORT0_STATUS */
- 0x94 0x00000000 /* PORT6_STATUS */
- >;
- };
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- phy-mode = "rgmii";
- };
-
- phy2: ethernet-phy@2 {
- reg = <2>;
- phy-mode = "rgmii";
- };
-
- phy3: ethernet-phy@3 {
- reg = <3>;
- phy-mode = "rgmii";
- };
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- phy-mode = "rgmii";
- };
- };
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- mt76x0e@0,0 {
- reg = <0x0000 0 0 0 0>;
- mtd-mac-address = <&config 0xe07e>;
- mtd-mac-address-increment = <(2)>;
- mediatek,mtd-eeprom = <&config 0xe08a>;
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "uartf", "i2c";
- ralink,function = "gpio";
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "xiaomi,miwifi-mini", "ralink,mt7620a-soc";
- model = "Xiaomi MiWiFi Mini";
-
- aliases {
- led-boot = &led_blue;
- led-failsafe = &led_blue;
- led-running = &led_blue;
- led-upgrade = &led_blue;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_blue: blue {
- label = "miwifi-mini:blue:status";
- gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
-
- yellow {
- label = "miwifi-mini:yellow:status";
- gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
- };
-
- red {
- label = "miwifi-mini:red:status";
- gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&gpio0 {
- status = "okay";
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0xf80000>;
- };
-
- partition@fd0000 {
- label = "crash";
- reg = <0xfd0000 0x10000>;
- };
-
- partition@fe0000 {
- label = "reserved";
- reg = <0xfe0000 0x10000>;
- read-only;
- };
-
- partition@ff0000 {
- label = "Bdata";
- reg = <0xff0000 0x10000>;
- };
- };
- };
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-ðernet {
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
- mtd-mac-address = <&factory 0x28>;
- mediatek,portmap = "llllw";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pa_pins>;
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
- ieee80211-freq-limit = <5000000 6000000>;
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "rgmii1";
- ralink,function = "gpio";
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620n.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "kingston,mlw221", "ralink,mt7620n-soc";
- model = "Kingston MLW221";
-
- aliases {
- led-boot = &led_system;
- led-failsafe = &led_system;
- led-running = &led_system;
- led-upgrade = &led_system;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_system: system {
- label = "mlw221:blue:system";
- gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
- };
-
- wifi {
- label = "mlw221:blue:wifi";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- system {
- label = "system";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- };
- };
-};
-
-&gpio0 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0xf60000>;
- };
-
- partition@fb0000 {
- label = "user-config";
- reg = <0xfb0000 0x50000>;
- };
- };
- };
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "wllll";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- default {
- ralink,group = "i2c", "ephy", "wled";
- ralink,function = "gpio";
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620n.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "kingston,mlwg2", "ralink,mt7620n-soc";
- model = "Kingston MLWG2";
-
- aliases {
- led-boot = &led_system;
- led-failsafe = &led_system;
- led-running = &led_system;
- led-upgrade = &led_system;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_system: system {
- label = "mlwg2:blue:system";
- gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
- };
-
- wifi {
- label = "mlwg2:blue:wifi";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- system {
- label = "system";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- };
- };
-};
-
-&gpio0 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0xf60000>;
- };
-
- partition@fb0000 {
- label = "user-config";
- reg = <0xfb0000 0x50000>;
- };
- };
- };
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "wllll";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- default {
- ralink,group = "i2c", "ephy", "wled";
- ralink,function = "gpio";
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "ralink,mt7620a-evb", "ralink,mt7620a-soc";
- model = "Ralink MT7620a + MT7610e evaluation board";
-
- keys {
- compatible = "gpio-keys";
- poll-interval = <20>;
-
- s2 {
- label = "S2";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- };
-
- s3 {
- label = "S3";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_1>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
- mediatek,portmap = "llllw";
-
- port@4 {
- status = "okay";
- phy-mode = "rgmii";
- phy-handle = <&phy4>;
- };
-
- port@5 {
- status = "okay";
- phy-mode = "rgmii";
- phy-handle = <&phy5>;
- };
-
- mdio-bus {
- status = "okay";
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- phy-mode = "rgmii";
- };
-
- phy5: ethernet-phy@5 {
- reg = <5>;
- phy-mode = "rgmii";
- };
- };
-};
-
-&gsw {
- mediatek,port4 = "gmac";
-};
-
-&sdhci {
- status = "okay";
-};
-
-&pcie {
- status = "okay";
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-/ {
- compatible = "ralink,mt7620a-mt7530-evb", "ralink,mt7620a-soc";
- model = "Ralink MT7620a + MT7530 evaluation board";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
- mediatek,portmap = "llllw";
-
- port@5 {
- status = "okay";
- mediatek,fixed-link = <1000 1 1 1>;
- phy-mode = "rgmii";
- };
-
- mdio-bus {
- status = "okay";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- phy-mode = "rgmii";
- };
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- phy-mode = "rgmii";
- };
-
- phy2: ethernet-phy@2 {
- reg = <2>;
- phy-mode = "rgmii";
- };
-
- phy3: ethernet-phy@3 {
- reg = <3>;
- phy-mode = "rgmii";
- };
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- phy-mode = "rgmii";
- };
-
- phy1f: ethernet-phy@1f {
- reg = <0x1f>;
- phy-mode = "rgmii";
- };
- };
-};
-
-&gsw {
- mediatek,port4 = "gmac";
-};
-
-&pcie {
- status = "okay";
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "ralink,mt7620a-mt7610e-evb", "ralink,mt7620a-soc";
- model = "Ralink MT7620A evaluation board";
-
- keys {
- compatible = "gpio-keys";
- poll-interval = <20>;
-
- wps {
- label = "wps";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- };
-
- reset {
- label = "reset";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_1>;
- };
- };
-};
-
-&gpio0 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <1000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
-
-ðernet {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
- mediatek,portmap = "llllw";
-};
-
-&gsw {
- mediatek,port4 = "ephy";
-};
-
-&sdhci {
- status = "okay";
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- wifi@0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
- ieee80211-freq-limit = <5000000 6000000>;
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "ralink,mt7620a-v22sg-evb", "ralink,mt7620a-soc";
- model = "Ralink MT7620a V22SG High Power evaluation board";
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- aoss {
- label = "aoss";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- nand {
- compatible = "mtk,mt7620-nand";
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x40000>;
- read-only;
- };
-
- partition@40000 {
- label = "u-boot-env";
- reg = <0x40000 0x20000>;
- read-only;
- };
-
- factory: partition@60000 {
- label = "factory";
- reg = <0x60000 0x20000>;
- read-only;
- };
-
- partition@80000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x80000 0x7f80000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartf", "spi";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
- mediatek,portmap = "llllw";
-
- port@4 {
- status = "okay";
- phy-handle = <&phy4>;
- phy-mode = "rgmii";
- };
-
- port@5 {
- status = "okay";
- phy-handle = <&phy5>;
- phy-mode = "rgmii";
- };
-
- mdio-bus {
- status = "okay";
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- phy-mode = "rgmii";
- };
-
- phy5: ethernet-phy@5 {
- reg = <5>;
- phy-mode = "rgmii";
- };
- };
-};
-
-&gsw {
- mediatek,port4 = "gmac";
-};
-
-&pcie {
- status = "okay";
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "planex,mzk-750dhp", "ralink,mt7620a-soc";
- model = "Planex MZK-750DHP";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- leds {
- compatible = "gpio-leds";
-
- wps {
- label = "mzk-750dhp:green:wps";
- gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
- };
-
- led_power: power {
- label = "mzk-750dhp:green:power";
- gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- };
-
- wlan5g {
- label = "mzk-750dhp:green:wlan5g";
- gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- s1 {
- label = "reset";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- s2 {
- label = "wps";
- gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "spi refclk", "rgmii1", "nd_sd";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "llllw";
-};
-
-&gsw {
- mediatek,port4 = "ephy";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "planex,mzk-ex300np", "ralink,mt7620a-soc";
- model = "Planex MZK-EX300NP";
-
- aliases {
- led-boot = &led_wps;
- led-failsafe = &led_wps;
- led-running = &led_wps;
- led-upgrade = &led_wps;
- };
-
- leds {
- compatible = "gpio-leds";
-
- wifi {
- label = "mzk-ex300np:green:wifi";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
-
- led_wps: wps {
- label = "mzk-ex300np:green:wps";
- gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
- };
-
- rep {
- label = "mzk-ex300np:blue:rep";
- gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
- };
-
- wifi1 {
- label = "mzk-ex300np:blue:wifi1";
- gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
- };
-
- wifi2 {
- label = "mzk-ex300np:blue:wifi2";
- gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
- };
-
- wifi3 {
- label = "mzk-ex300np:blue:wifi3";
- gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_RFKILL>;
- };
- };
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x730000>;
- };
-
- partition@780000 {
- label = "Udata";
- reg = <0x780000 0x80000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "spi refclk", "rgmii1", "wled";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "llllw";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "planex,mzk-ex750np", "ralink,mt7620a-soc";
- model = "Planex MZK-EX750NP";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "mzk-ex750np:red:power";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
-
- wifi {
- label = "mzk-ex750np:red:wifi";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "mzk-ex750np:green:wps";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- };
-
- rep {
- label = "mzk-ex750np:blue:rep";
- gpios = <&gpio2 16 GPIO_ACTIVE_LOW>;
- };
-
- wifi1 {
- label = "mzk-ex750np:blue:wifi1";
- gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
- };
-
- wifi2 {
- label = "mzk-ex750np:blue:wifi2";
- gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
- };
-
- wifi3 {
- label = "mzk-ex750np:blue:wifi3";
- gpios = <&gpio2 17 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_RFKILL>;
- };
- };
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x730000>;
- };
-
- partition@780000 {
- label = "Udata";
- reg = <0x780000 0x80000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "uartf", "nd_sd", "rgmii2", "wled";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "llllw";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "microduino,microwrt", "ralink,mt7620a-soc";
- model = "Microduino MicroWRT";
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x20000>;
- read-only;
- };
-
- partition@20000 {
- label = "u-boot-env";
- reg = <0x20000 0x10000>;
- read-only;
- };
-
- factory: partition@30000 {
- label = "factory";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- partition@40000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x40000 0xfc0000>;
- };
- };
- };
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-ðernet {
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "llllw";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- default {
- ralink,group = "wled", "i2c", "wdt", "uartf";
- ralink,function = "gpio";
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "sercomm,na930", "ralink,mt7620a-soc";
- model = "Sercomm NA930";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- chosen {
- bootargs = "console=ttyS1,57600";
- };
-
- nand {
- compatible = "mtk,mt7620-nand";
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x20000>;
- read-only;
- };
-
- partition@200000 {
- label = "factory";
- reg = <0x200000 0x40000>;
- read-only;
- };
-
- partition@240000 {
- label = "Config";
- reg = <0x240000 0x400000>;
- read-only;
- };
-
- partition@640000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x640000 0x1400000>;
- };
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- zwave {
- label = "zwave";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- zwave {
- label = "na930:blue:zwave";
- gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
- };
-
- status {
- label = "na930:blue:status";
- gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>;
- linux,default-trigger = "usbport";
- };
-
- service {
- label = "na930:blue:service";
- gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
- };
-
- led_power: power {
- label = "na930:blue:power";
- gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- telit {
- gpio-export,name = "telit";
- gpio-export,output = <1>;
- gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "rgmii2", "spi", "ephy";
- ralink,function = "gpio";
- };
-
- uartf_gpio {
- ralink,group = "uartf";
- ralink,function = "gpio uartf";
- };
- };
-};
-
-&uart {
- status = "okay";
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
-ðernet {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii1_pins &mdio_pins>;
- mediatek,portmap = "llllw";
-
- port@4 {
- status = "okay";
- phy-handle = <&phy4>;
- phy-mode = "rgmii";
- };
-
- port@5 {
- status = "okay";
- phy-handle = <&phy5>;
- phy-mode = "rgmii";
- };
-
- mdio-bus {
- status = "okay";
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- phy-mode = "rgmii";
- };
-
- phy5: ethernet-phy@5 {
- reg = <5>;
- phy-mode = "rgmii";
- };
- };
-};
-
-&gsw {
- mediatek,port4 = "gmac";
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "ohyeah,oy-0001", "ralink,mt7620a-soc";
- model = "OY-0001";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: powerled {
- label = "oy-0001:green:power";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
-
- wifiled {
- label = "oy-0001:green:wifi";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- s1 {
- label = "reset";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0xfb0000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
- mediatek,portmap = "llllw";
-};
-
-&gsw {
- mediatek,port4 = "ephy";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&sdhci {
- status = "okay";
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "phicomm,psg1208", "ralink,mt7620a-soc";
- model = "Phicomm PSG1208";
-
- aliases {
- led-boot = &led_wps;
- led-failsafe = &led_wps;
- led-running = &led_wps;
- led-upgrade = &led_wps;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_wps: wps {
- label = "psg1208:white:wps";
- gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- };
-
- wlan {
- label = "psg1208:white:wlan2g";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@20000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@30000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@40000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "spi refclk", "wled";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "llllw";
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
- ieee80211-freq-limit = <5000000 6000000>;
- };
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
+++ /dev/null
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "phicomm,psg1218", "ralink,mt7620a-soc";
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&gpio0 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@20000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@30000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@40000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
- ieee80211-freq-limit = <5000000 6000000>;
- };
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "PSG1218.dtsi"
-
-/ {
- compatible = "phicomm,psg1218a", "phicomm,psg1218", "ralink,mt7620a-soc";
- model = "Phicomm PSG1218 rev.A";
-
- aliases {
- led-boot = &led_blue;
- led-failsafe = &led_blue;
- led-running = &led_blue;
- led-upgrade = &led_blue;
- };
-
- leds {
- compatible = "gpio-leds";
- led_blue: blue {
- label = "psg1218a:blue:status";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
-
- yellow {
- label = "psg1218a:yellow:status";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
-
- red {
- label = "psg1218a:red:status";
- gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
- mtd-mac-address = <&factory 0x28>;
- mediatek,portmap = "llllw";
-};
-
-&wmac {
- pinctrl-names = "default";
- pinctrl-0 = <&pa_pins>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "PSG1218.dtsi"
-
-/ {
- compatible = "phicomm,psg1218b", "phicomm,psg1218", "ralink,mt7620a-soc";
- model = "Phicomm PSG1218 rev.B";
-
- aliases {
- led-boot = &led_blue;
- led-failsafe = &led_blue;
- led-running = &led_blue;
- led-upgrade = &led_blue;
- };
-
- leds {
- compatible = "gpio-leds";
- led_blue: blue {
- label = "psg1218b:blue:status";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
-
- yellow {
- label = "psg1218b:yellow:status";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
-
- red {
- label = "psg1218b:red:status";
- gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd", "pa";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
- mtd-mac-address = <&factory 0x28>;
- mediatek,portmap = "llllw";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "asus,rp-n53", "ralink,mt7620a-soc";
- model = "Asus RP-N53";
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- touch {
- label = "touch";
- gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- };
-
- reset {
- label = "reset";
- gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- };
-
- audio {
- label = "audio";
- gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
- linux,code = <BTN_1>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- backlight {
- label = "rp-n53:white:back";
- gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
- };
-
- wifi0 {
- label = "rp-n53:blue:5g3";
- gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
- };
-
- wifi1 {
- label = "rp-n53:blue:5g2";
- gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
- };
-
- wifi2 {
- label = "rp-n53:blue:5g1";
- gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
- };
-
- wifi3 {
- label = "rp-n53:blue:wifi";
- gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
- };
-
- wifi4 {
- label = "rp-n53:blue:2g1";
- gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
- };
-
- wifi5 {
- label = "rp-n53:blue:2g2";
- gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
- };
-
- wifi6 {
- label = "rp-n53:blue:2g3";
- gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&i2c {
- status = "okay";
-};
-
-&i2s {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pcm_i2s_pins>;
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
-
-&pcm {
- status = "okay";
-};
-
-&gdma {
- status = "okay";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "mdio", "rgmii1";
- ralink,function = "gpio";
- };
- };
-};
-
-&gsw {
- mediatek,port4 = "ephy";
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- wifi@0,0 {
- compatible = "pci1814,5592";
- reg = <0x0000 0 0 0 0>;
- ralink,2ghz = <0>;
- ralink,mtd-eeprom = <&factory 0x8000>;
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "asus,rt-ac51u", "ralink,mt7620a-soc";
- model = "Asus RT-AC51U";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "rt-ac51u:blue:power";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
-
- usb {
- label = "rt-ac51u:blue:usb";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>;
- linux,default-trigger = "usbport";
- };
-
- wifi {
- label = "rt-ac51u:blue:wifi";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- enable-leds {
- gpio-export,name = "enable-leds";
- gpio-export,output = <1>;
- gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0xfb0000>;
- };
- };
- };
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-ðernet {
- status = "okay";
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "wllll";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "wled", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- wifi@0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620n.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "asus,rt-n12p", "ralink,mt7620n-soc";
- model = "Asus RT-N12+";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- leds {
- compatible = "gpio-leds";
-
- wan {
- label = "rt-n12p:green:wan";
- gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
- };
-
- lan {
- label = "rt-n12p:green:lan";
- gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- };
-
- led_power: power {
- label = "rt-n12p:green:power";
- gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
- };
-
- air {
- label = "rt-n12p:green:air";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0xfb0000>;
- };
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "wllll";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- default {
- ralink,group = "ephy", "wled", "i2c", "wdt", "pa", "spi refclk";
- ralink,function = "gpio";
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620n.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "asus,rt-n14u", "ralink,mt7620n-soc";
- model = "Asus RT-N14U";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- leds {
- compatible = "gpio-leds";
-
- wan {
- label = "rt-n14u:blue:wan";
- gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
- };
-
- lan {
- label = "rt-n14u:blue:lan";
- gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
- };
-
- usb {
- label = "rt-n14u:blue:usb";
- gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>;
- linux,default-trigger = "usbport";
- };
-
- led_power: power {
- label = "rt-n14u:blue:power";
- gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
- };
-
- air {
- label = "rt-n14u:blue:air";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0xfb0000>;
- };
- };
- };
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "wllll";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- default {
- ralink,group = "ephy", "wled", "i2c";
- ralink,function = "gpio";
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "dovado,tiny-ac", "ralink,mt7620a-soc";
- model = "Dovado Tiny AC";
-
- chosen {
- bootargs = "console=ttyS0,57600";
- };
-
- leds {
- compatible = "gpio-leds";
-
- usb {
- label = "tiny-ac:green:usb";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>;
- linux,default-trigger = "usbport";
- };
-
- wifi {
- label = "tiny-ac:orange:wifi";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- usbpower {
- gpio-export,name = "usbpower";
- gpio-export,output = <1>;
- gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&gpio0 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-ðernet {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
- mediatek,portmap = "llllw";
-
- port@4 {
- status = "okay";
- phy-mode = "rgmii";
- phy-handle = <&phy4>;
- };
-
- port@5 {
- status = "okay";
- phy-mode = "rgmii";
- phy-handle = <&phy5>;
- };
-
- mdio-bus {
- status = "okay";
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- phy-mode = "rgmii";
- };
-
- phy5: ethernet-phy@5 {
- reg = <5>;
- phy-mode = "rgmii";
- };
- };
-};
-
-&gsw {
- mediatek,port4 = "gmac";
-};
-
-&pcie {
- status = "okay";
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "uartf", "nd_sd", "wled";
- ralink,function = "gpio";
- };
- };
-};
-
-&pcie0 {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
- ieee80211-freq-limit = <5000000 6000000>;
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "alfa-network,tube-e4g", "ralink,mt7620a-soc";
- model = "ALFA Network Tube-E4G";
-
- aliases {
- led-boot = &power;
- led-failsafe = &power;
- led-running = &power;
- led-upgrade = &power;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- gpio-export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- modem-enable {
- gpio-export,name = "modem-enable";
- gpio-export,output = <1>;
- gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
- };
-
- modem-rf-enable {
- gpio-export,name = "modem-rf-enable";
- gpio-export,output = <1>;
- gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
- };
-
- sim-select {
- gpio-export,name = "sim-select";
- gpio-export,output = <0>;
- gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
- };
-
- sim1-detect {
- gpio-export,name = "sim1-detect";
- gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
- };
-
- sim2-detect {
- gpio-export,name = "sim2-detect";
- gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- 4g {
- label = "tube-e4g:green:4g";
- gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- };
-
- lan {
- label = "tube-e4g:blue:lan";
- gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
- };
-
- power: power {
- label = "tube-e4g:green:power";
- gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
-
- sim1 {
- label = "tube-e4g:green:sim1";
- gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
-
- sim2 {
- label = "tube-e4g:green:sim2";
- gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
- };
-};
-
-&ehci {
- status = "okay";
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x28>;
-};
-
-&gpio0 {
- status = "okay";
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&gsw {
- mediatek,port4 = "ephy";
-};
-
-&ohci {
- status = "okay";
-};
-
-&pcie {
- status = "disabled";
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "ephy", "nd_sd", "pcie", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <50000000>;
- m25p,fast-read;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x1000>;
- };
-
- partition@31000 {
- label = "config";
- reg = <0x31000 0xf000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0xfb0000>;
- };
- };
- };
-};
-
-&wmac {
- status = "disabled";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/{
- compatible = "kimax,u25awf-h1","ralink,mt7620a-soc";
- model = "Kimax U25AWF-H1";
-
- aliases {
- led-boot = &led_wifi;
- led-failsafe = &led_wifi;
- led-running = &led_wifi;
- led-upgrade = &led_wifi;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_wifi: wifi {
- label = "u25awf:red:wifi";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
-
- lan {
- label = "u25awf:green:lan";
- gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0xfb0000>;
- };
- };
- };
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- default {
- ralink,group = "uartf", "ephy", "wled";
- ralink,function = "gpio";
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620n.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "kimax,u35wf","ralink,mt7620n-soc";
- model = "Kimax U35WF";
-
- aliases {
- led-boot = &led_wifi;
- led-failsafe = &led_wifi;
- led-running = &led_wifi;
- led-upgrade = &led_wifi;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_wifi: wifi {
- label = "u35wf:blue:wifi";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
-
- lan {
- label = "u35wf:green:eth";
- gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0xfb0000>;
- };
- };
- };
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- default {
- ralink,group = "ephy", "wled";
- ralink,function = "gpio";
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620n.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "vonets,var11n-300", "ralink,mt7620n-soc";
- model = "Vonets VAR11N-300";
-
- aliases {
- led-boot = &led_system;
- led-failsafe = &led_system;
- led-running = &led_system;
- led-upgrade = &led_system;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_system: system {
- label = "var11n-300:blue:system";
- gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&gpio0 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "llllw";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- default {
- ralink,group = "i2c";
- ralink,function = "gpio";
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620n.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "ravpower,wd03", "ralink,mt7620n-soc";
- model = "Ravpower WD03";
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- leds {
- compatible = "gpio-leds";
-
- green-wifi {
- label = "wd03:green:wifi";
- gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
- };
-
-
- blue-wifi {
- label = "wd03:blue:wifi";
- gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&i2c {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4000>;
- ralink,port-map = "wllll";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "wled", "ephy";
- ralink,function = "gpio";
- };
- };
-};
+++ /dev/null
-/*
- * BSD LICENSE
- *
- * Copyright(c) 2017 Kristian Evensen <kristian.evensen@gmail.com>.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Broadcom Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-#include "WE1026-5G.dtsi"
-
-/ {
- compatible = "zbtlink,we1026-5g-16m", "ralink,mt7620a-soc";
- model = "ZBT WE1026-5G (16M)";
-};
-
-&spi0 {
- status = "okay";
-
- en25q128@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- firmware: partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0xfb0000>;
- };
- };
- };
-};
+++ /dev/null
-/*
- * BSD LICENSE
- *
- * Copyright(c) 2017 Kristian Evensen <kristian.evensen@gmail.com>.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Broadcom Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "zbtlink,we1026-5g", "ralink,mt7620a-soc";
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- leds {
- compatible = "gpio-leds";
- lan {
- label = "we1026-5g:green:lan";
- gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
- };
-
- usb {
- label = "we1026-5g:green:usb";
- gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>;
- linux,default-trigger = "usbport";
- };
-
- wifi {
- label = "we1026-5g:green:wifi";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
- reset {
- label = "reset";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&sdhci {
- status = "okay";
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x28>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- default {
- ralink,group = "i2c", "uartf", "spi refclk", "ephy", "wled";
- ralink,function = "gpio";
- };
- };
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- wifi@0,0 {
- compatible = "pci14c3,7662";
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
- ieee80211-freq-limit = <5000000 6000000>;
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "buffalo,whr-1166d", "ralink,mt7620a-soc";
- model = "Buffalo WHR-1166D";
-
- aliases {
- led-boot = &led_power_green;
- led-failsafe = &led_power_green;
- led-running = &led_power_green;
- led-upgrade = &led_power_green;
- };
-
- leds {
- compatible = "gpio-leds";
-
- power {
- label = "whr-1166d:red:power";
- gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- };
-
- wifi {
- label = "whr-1166d:green:wifi";
- gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
- };
-
- led_power_green: power2 {
- label = "whr-1166d:green:power";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
-
- wifi2 {
- label = "whr-1166d:orange:wifi";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- };
-
- internet {
- label = "whr-1166d:green:internet";
- gpios = <&gpio2 17 GPIO_ACTIVE_LOW>;
- };
-
- router {
- label = "whr-1166d:orange:router";
- gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
- };
-
- router2 {
- label = "whr-1166d:green:router";
- gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- aoss {
- label = "aoss";
- gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- ap {
- label = "ap";
- gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- linux,input-type = <EV_SW>;
- };
-
- bridge {
- label = "bridge";
- gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- linux,input-type = <EV_SW>;
- };
- };
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0xfb0000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartf", "wled", "nd_sd";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii1_pins &mdio_pins>;
-
- port@5 {
- status = "okay";
- phy-handle = <&phy5>;
- phy-mode = "rgmii";
- };
-
- mdio-bus {
- status = "okay";
-
- phy5: ethernet-phy@5 {
- reg = <5>;
- phy-mode = "rgmii-rxid";
- };
- };
-};
-
-&gsw {
- mediatek,port4 = "ephy";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- wifi@0,0 {
- compatible = "pci0,0";
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
- ieee80211-freq-limit = <5000000 6000000>;
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "buffalo,whr-300hp2", "ralink,mt7620a-soc";
- model = "Buffalo WHR-300HP2";
-
- aliases {
- led-boot = &led_power_green;
- led-failsafe = &led_power_green;
- led-running = &led_power_green;
- led-upgrade = &led_power_green;
- };
-
- leds {
- compatible = "gpio-leds";
-
- power {
- label = "whr-300hp2:red:power";
- gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- };
-
- wifi {
- label = "whr-300hp2:green:wifi";
- gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
- };
-
- led_power_green: power2 {
- label = "whr-300hp2:green:power";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
-
- wifi2 {
- label = "whr-300hp2:orange:wifi";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- };
-
- internet {
- label = "whr-300hp2:green:internet";
- gpios = <&gpio2 17 GPIO_ACTIVE_LOW>;
- };
-
- router {
- label = "whr-300hp2:green:router";
- gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
- };
-
- router2 {
- label = "whr-300hp2:orange:router";
- gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- aoss {
- label = "aoss";
- gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- ap {
- label = "ap";
- gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- linux,input-type = <EV_SW>;
- };
-
- bridge {
- label = "bridge";
- gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- linux,input-type = <EV_SW>;
- };
- };
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
- mediatek,portmap = "llllw";
-};
-
-&gsw {
- mediatek,port4 = "ephy";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pa_pins>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "buffalo,whr-600d", "ralink,mt7620a-soc";
- model = "Buffalo WHR-600D";
-
- aliases {
- led-boot = &led_power_green;
- led-failsafe = &led_power_green;
- led-running = &led_power_green;
- led-upgrade = &led_power_green;
- };
-
- leds {
- compatible = "gpio-leds";
-
- power {
- label = "whr-600d:red:power";
- gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- };
-
- wifi {
- label = "whr-600d:green:wifi";
- gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
- };
-
- led_power_green: power2 {
- label = "whr-600d:green:power";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
-
- wifi2 {
- label = "whr-600d:orange:wifi";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- };
-
- internet {
- label = "whr-600d:green:internet";
- gpios = <&gpio2 17 GPIO_ACTIVE_LOW>;
- };
-
- router {
- label = "whr-600d:green:router";
- gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
- };
-
- router2 {
- label = "whr-600d:orange:router";
- gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- aoss {
- label = "aoss";
- gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- ap {
- label = "ap";
- gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- linux,input-type = <EV_SW>;
- };
-
- bridge {
- label = "bridge";
- gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- linux,input-type = <EV_SW>;
- };
- };
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "llllw";
-};
-
-&gsw {
- mediatek,port4 = "ephy";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- wifi@0,0 {
- compatible = "pci1814,5592";
- reg = <0x0000 0 0 0 0>;
- ralink,mtd-eeprom = <&factory 0x8000>;
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620n.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "buffalo,wmr-300", "ralink,mt7620n-soc";
- model = "Buffalo WMR-300";
-
- aliases {
- led-boot = &led_status;
- led-failsafe = &led_status;
- led-running = &led_status;
- led-upgrade = &led_status;
- };
-
- leds {
- compatible = "gpio-leds";
-
- aoss1 {
- label = "wmr-300:red:aoss";
- gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
- };
-
- aoss2 {
- label = "wmr-300:green:aoss";
- gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
- };
-
- led_status: status {
- label = "wmr-300:green:status";
- gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- aoss {
- label = "aoss";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "wllll";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- default {
- ralink,group = "i2c", "ephy";
- ralink,function = "gpio";
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "iodata,wn-ac1167gr", "ralink,mt7620a-soc";
- model = "I-O DATA WN-AC1167GR";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "wn-ac1167gr:green:power";
- gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
-
- wlan2g {
- label = "wn-ac1167gr:green:wlan2g";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- };
-
- notification {
- label = "wn-ac1167gr:green:notification";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
-
- wlan5g {
- label = "wn-ac1167gr:green:wlan5g";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- wps {
- label = "wps";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- reset {
- label = "reset";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- auto {
- label = "auto";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- linux,input-type = <EV_SW>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- Factory: partition@40000 {
- label = "Factory";
- reg = <0x40000 0x8000>;
- read-only;
- };
-
- iNIC_rf: partition@48000 {
- label = "iNIC_rf";
- reg = <0x48000 0x8000>;
- read-only;
- };
-
- partition@50000 {
- label = "NoUsed";
- reg = <0x50000 0x20000>;
- read-only;
- };
-
- partition@70000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x70000 0x6b4000>;
- };
-
- partition@724000 {
- label = "manufacture";
- reg = <0x724000 0x8c000>;
- read-only;
- };
-
- partition@7b0000 {
- label = "backup";
- reg = <0x7b0000 0x10000>;
- read-only;
- };
-
- partition@7c0000 {
- label = "storage";
- reg = <0x7c0000 0x40000>;
- read-only;
- };
- };
- };
-};
-
-ðernet {
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii1_pins &mdio_pins>;
- mtd-mac-address = <&Factory 0x4>;
-
- port@5 {
- status = "okay";
- mediatek,fixed-link = <1000 1 1 1>;
- phy-mode = "rgmii";
- };
-
- mdio-bus {
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
-
- ethernet-phy@0 {
- reg = <0>;
- phy-mode = "rgmii";
- };
-
- ethernet-phy@1 {
- reg = <1>;
- phy-mode = "rgmii";
- };
-
- ethernet-phy@2 {
- reg = <2>;
- phy-mode = "rgmii";
- };
-
- ethernet-phy@3 {
- reg = <3>;
- phy-mode = "rgmii";
- };
-
- ethernet-phy@4 {
- reg = <4>;
- phy-mode = "rgmii";
- };
-
- ethernet-phy@1f {
- reg = <0x1f>;
- phy-mode = "rgmii";
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- wifi@0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&iNIC_rf 0x0>;
- ieee80211-freq-limit = <5000000 6000000>;
- };
-};
-
-&wmac {
- ralink,mtd-eeprom = <&Factory 0x0>;
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "iodata,wn-ac733gr3", "ralink,mt7620a-soc";
- model = "I-O DATA WN-AC733GR3";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "wn-ac733gr3:green:power";
- gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
-
- notification {
- label = "wn-ac733gr3:green:notification";
- gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
- };
-
- wlan2g {
- label = "wn-ac733gr3:green:wlan2g";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- };
-
- wlan5g {
- label = "wn-ac733gr3:green:wlan5g";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- router {
- label = "router";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- linux,input-type = <EV_SW>;
- };
-
- auto {
- label = "auto";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- linux,input-type = <EV_SW>;
- };
- };
-
- rtl8367rb {
- compatible = "realtek,rtl8367b";
- gpio-sda = <&gpio0 22 GPIO_ACTIVE_HIGH>;
- gpio-sck = <&gpio0 23 GPIO_ACTIVE_HIGH>;
- realtek,extif1 = <1 0 1 1 1 1 1 1 2>;
- };
-};
-
-&spi0 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- Factory: partition@40000 {
- label = "Factory";
- reg = <0x40000 0x8000>;
- read-only;
- };
-
- iNIC_rf: partition@48000 {
- label = "iNIC_rf";
- reg = <0x48000 0x8000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x6d4000>;
- };
-
- partition@724000 {
- label = "manufacture";
- reg = <0x724000 0x8c000>;
- read-only;
- };
-
- partition@7b0000 {
- label = "backup";
- reg = <0x7b0000 0x10000>;
- read-only;
- };
-
- partition@7c0000 {
- label = "storage";
- reg = <0x7c0000 0x40000>;
- read-only;
- };
- };
- };
-};
-
-ðernet {
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii1_pins>;
- mtd-mac-address = <&Factory 0x4>;
-
- port@5 {
- status = "okay";
- mediatek,fixed-link = <1000 1 1 1>;
- phy-mode = "rgmii";
- };
-};
-
-&gpio0 {
- rtl8367rb_reset {
- gpio-hog;
- gpios = <0 GPIO_ACTIVE_HIGH>;
- output-high;
- line-name = "rtl8367rb-reset";
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartf", "mdio";
- ralink,function = "gpio";
- };
- };
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- wifi@0,0 {
- compatible = "mediatek,mt76";
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&iNIC_rf 0x0>;
- ieee80211-freq-limit = <5000000 6000000>;
- };
-};
-
-&wmac {
- ralink,mtd-eeprom = <&Factory 0x0>;
-};
+++ /dev/null
-/* This file is released into the public domain */
-
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- compatible = "netgear,wn3000rp-v3", "ralink,mt7620a-soc";
- model = "Netgear WN3000RPv3";
-
- aliases {
- led-boot = &led_power_green;
- led-failsafe = &led_power_green;
- led-running = &led_power_green;
- led-upgrade = &led_power_green;
- };
-
- chosen {
- bootargs = "console=ttyS0,57600";
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power_green: power_g {
- label = "wn3000rpv3:green:power";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
-
- power_r {
- label = "wn3000rpv3:red:power";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
-
- client_g {
- label = "wn3000rpv3:green:client";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- };
-
- client_r {
- label = "wn3000rpv3:red:client";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- };
-
- router_g {
- label = "wn3000rpv3:green:router";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- };
-
- router_r {
- label = "wn3000rpv3:red:router";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "wn3000rpv3:green:wps";
- gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- };
-
- l_arrow {
- label = "wn3000rpv3:blue:leftarrow";
- gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- };
-
- r_arrow {
- label = "wn3000rpv3:blue:rightarrow";
- gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- partition@40000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x40000 0x7b0000>;
- };
-
- art: partition@7f0000 {
- label = "art";
- reg = <0x7f0000 0x10000>;
- read-only;
- };
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&art 0x0>;
-};
-
-&wmac {
- mtd-mac-address = <&art 0x6>;
- ralink,mtd-eeprom = <&art 0x1000>;
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- default {
- ralink,group = "i2c", "uartf", "spi refclk";
- ralink,function = "gpio";
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620n.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "elecom,wrh-300cr", "ralink,mt7620n-soc";
- model = "ELECOM WRH-300CR";
-
- aliases {
- led-boot = &led_wps;
- led-failsafe = &led_wps;
- led-running = &led_wps;
- led-upgrade = &led_wps;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_wps: wps {
- label = "wrh-300cr:green:wps";
- gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
- };
-
- ethernet {
- label = "wrh-300cr:green:ethernet";
- gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
- };
-
- wlan {
- label = "wrh-300cr:green:wlan";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "recover";
- reg = <0x50000 0x1c0000>;
- read-only;
- };
-
- partition@210000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x210000 0xdf0000>;
- };
- };
- };
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x2e>;
- mediatek,portmap = "llllw";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- default {
- ralink,group = "i2c", "ephy", "wled";
- ralink,function = "gpio";
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620n.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- compatible = "wrtnode,wrtnode", "ralink,mt7620n-soc";
- model = "WRTNODE";
-
- aliases {
- led-boot = &led_indicator;
- led-failsafe = &led_indicator;
- led-running = &led_indicator;
- led-upgrade = &led_indicator;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_indicator: indicator {
- label = "wrtnode:blue:indicator";
- gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0xfb0000>;
- };
- };
- };
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "wllll";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- default {
- ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf", "spi refclk";
- ralink,function = "gpio";
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "WT3020.dtsi"
-
-/ {
- compatible = "nexx,wt3020-4m", "nexx,wt3020", "ralink,mt7620n-soc";
- model = "Nexx WT3020 (4M)";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "WT3020.dtsi"
-
-/ {
- compatible = "nexx,wt3020-8m", "nexx,wt3020", "ralink,mt7620n-soc";
- model = "Nexx WT3020 (8M)";
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
+++ /dev/null
-#include "mt7620n.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "nexx,wt3020", "ralink,mt7620n-soc";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "wt3020:blue:power";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "wllll";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- default {
- ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf";
- ralink,function = "gpio";
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "Y1.dtsi"
-
-/ {
- compatible = "lenovo,newifi-y1", "ralink,mt7620a-soc";
- model = "Lenovo Y1";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "y1:blue:power";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
-
- wlan1 {
- label = "y1:blue:wifi";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
-
- wlan2 {
- label = "y1:blue:wifi5g";
- gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
- };
-
- usb {
- label = "y1:blue:usb";
- gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>;
- linux,default-trigger = "usbport";
- };
-
- lan {
- label = "y1:blue:lan";
- gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
- };
-
- internet {
- label = "y1:blue:internet";
- gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-ðernet {
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "llllw";
-};
+++ /dev/null
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "lenovo,newifi-y1", "ralink,mt7620a-soc";
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&gpio0 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0xfb0000>;
- };
- };
- };
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
- ieee80211-freq-limit = <5000000 6000000>;
- };
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pa_pins>;
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "uartf", "wled", "nd_sd";
- ralink,function = "gpio";
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "Y1.dtsi"
-
-/ {
- compatible = "lenovo,newifi-y1s", "lenovo,newifi-y1", "ralink,mt7620a-soc";
- model = "Lenovo Y1S";
-
- aliases {
- led-boot = &led_power_blue;
- led-failsafe = &led_power_blue;
- led-running = &led_power_blue;
- led-upgrade = &led_power_blue;
- };
-
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- usb0 {
- gpio-export,name = "usb0";
- gpio-export,output = <1>;
- gpios = <&gpio2 14 GPIO_ACTIVE_HIGH>;
- };
- usb1 {
- gpio-export,name = "usb1";
- gpio-export,output = <1>;
- gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
- };
- usb2 {
- gpio-export,name = "usb2";
- gpio-export,output = <1>;
- gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- power1 {
- label = "y1s:yellow:power";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
-
- led_power_blue: power2 {
- label = "y1s:blue:power";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
-
- wlan1 {
- label = "y1s:yellow:wifi";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
-
- wlan2 {
- label = "y1s:blue:wifi";
- gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
- };
-
- usb1 {
- label = "y1s:yellow:usb";
- gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
- };
-
- usb2 {
- label = "y1s:blue:usb";
- gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>;
- linux,default-trigger = "usbport";
- };
-
- internet {
- label = "y1s:blue:internet";
- gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-ðernet {
- status = "okay";
- mtd-mac-address = <&factory 0x4>;
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
- mediatek,portmap = "wllll";
-
- port@4 {
- status = "okay";
- phy-handle = <&phy4>;
- phy-mode = "rgmii";
- };
-
- port@5 {
- status = "okay";
- phy-handle = <&phy5>;
- phy-mode = "rgmii";
- };
-
- mdio-bus {
- status = "okay";
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- phy-mode = "rgmii";
- };
-
- phy5: ethernet-phy@5 {
- reg = <5>;
- phy-mode = "rgmii";
- };
- };
-};
-
-&gsw {
- mediatek,port4 = "gmac";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "youku,yk1", "ralink,mt7620a-soc";
- model = "YOUKU YK1";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- leds {
- compatible = "gpio-leds";
- wan {
- label = "youku-yk1:blue:wan";
- gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
- };
- air {
- label = "youku-yk1:blue:air";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
- usb {
- label = "youku-yk1:blue:usb";
- gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>;
- linux,default-trigger = "usbport";
- };
- led_power: power {
- label = "youku-yk1:blue:power";
- gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
- reset {
- label = "reset";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&gpio0 {
- status = "okay";
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "mx25l25635f", "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <25000000>;
- m25p,fast-read;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x1fb0000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- default {
- ralink,group = "i2c", "rgmii1", "ephy", "wled";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- pinctrl-names = "default";
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "llllw";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&sdhci {
- status = "okay";
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "zbtlink,zbt-ape522ii", "ralink,mt7620a-soc";
- model = "ZBT-APE522II";
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- leds {
- compatible = "gpio-leds";
-
- sys1 {
- label = "zbt-ape522ii:green:sys1";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
-
- sys2 {
- label = "zbt-ape522ii:green:sys2";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- };
-
- sys3 {
- label = "zbt-ape522ii:green:sys3";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
-
- sys4 {
- label = "zbt-ape522ii:green:sys4";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
-
- wlan2g4 {
- label = "zbt-ape522ii:green:wlan2g4";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&gpio0 {
- status = "okay";
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0xf80000>;
- };
- };
- };
-};
-
-ðernet {
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "wllll";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pa_pins>;
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
- ieee80211-freq-limit = <5000000 6000000>;
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "wled", "i2c", "uartf", "wdt";
- ralink,function = "gpio";
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620n.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "zbtlink,zbt-cpe102", "ralink,mt7620n-soc";
- model = "Zbtlink ZBT-CPE102";
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
-
- aliases {
- led-boot = &led_4g_0;
- led-failsafe = &led_4g_0;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_4g_0: 4g-0 {
- label = "zbt-cpe102:green:4g-0";
- gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- };
-
- 4g-1 {
- label = "zbt-cpe102:green:4g-1";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- };
-
- 4g-2 {
- label = "zbt-cpe102:green:4g-2";
- gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- en25q64@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x760000>;
- };
- };
- };
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "wllll";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- default {
- ralink,group = "i2c", "spi refclk", "wled";
- ralink,function = "gpio";
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620n.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "zbtlink,zbt-wa05", "ralink,mt7620n-soc";
- model = "Zbtlink ZBT-WA05";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "zbt-wa05:blue:power";
- gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- };
-
- usb {
- label = "zbt-wa05:blue:usb";
- gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>;
- linux,default-trigger = "usbport";
- };
-
- air {
- label = "zbt-wa05:blue:air";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- en25q64@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x760000>;
- };
- };
- };
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "wllll";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- default {
- ralink,group = "i2c", "spi refclk", "wled";
- ralink,function = "gpio";
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "mt7620n.dtsi"
-
-/ {
- compatible = "zbtlink,zbt-we2026", "ralink,mt7620n-soc";
- model = "Zbtlink ZBT-WE2026";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "zbt-we2026:red:power";
- gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- };
-
- wlan {
- label = "zbt-we2026:green:wlan";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- en25q64@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x760000>;
- };
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "wllll";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- default {
- ralink,group = "i2c", "spi refclk", "wled";
- ralink,function = "gpio";
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "ZBT-WE826.dtsi"
-
-/ {
- compatible = "zbtlink,zbt-we826-16m", "zbtlink,zbt-we826", "ralink,mt7620a-soc";
- model = "ZBT-WE826 (16M)";
-};
-
-&spi0 {
- status = "okay";
-
- en25q128@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- firmware: partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0xfb0000>;
- };
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "ZBT-WE826.dtsi"
-
-/ {
- compatible = "zbtlink,zbt-we826-32m", "zbtlink,zbt-we826", "ralink,mt7620a-soc";
- model = "ZBT-WE826 (32M)";
-};
-
-&spi0 {
- status = "okay";
-
- en25q128@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- firmware: partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x1fb0000>;
- };
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "ZBT-WE826.dtsi"
-
-/ {
- compatible = "zbtlink,zbt-we826-e", "zbtlink,zbt-we826", "ralink,mt7620a-soc";
- model = "ZBT-WE826-E";
-
- /delete-node/ leds;
-
- leds {
- compatible = "gpio-leds";
-
- led_power: gsm {
- label = "zbt-we826-e:blue:gsm";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
-
- signal {
- label = "zbt-we826-e:green:signal";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
-
- sim {
- label = "zbt-we826-e:red:sim";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- };
-
- air {
- label = "zbt-we826-e:red:wifi";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- firmware: partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x1fb0000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- default {
- ralink,group = "i2c", "uartf", "wled";
- ralink,function = "gpio";
- };
- };
-};
+++ /dev/null
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "zbtlink,zbt-we826", "ralink,mt7620a-soc";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- leds {
- compatible = "gpio-leds";
- led_power: power {
- label = "zbt-we826:green:power";
- gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
- };
- usb {
- label = "zbt-we826:green:usb";
- gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>;
- linux,default-trigger = "usbport";
- };
- air {
- label = "zbt-we826:green:wifi";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
- reset {
- label = "reset";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&gpio0 {
- status = "okay";
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&sdhci {
- status = "okay";
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "wllll";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- default {
- ralink,group = "i2c", "uartf", "wled", "spi refclk", "pa";
- ralink,function = "gpio";
- };
- };
-};
-
-&pcie {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620n.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "zbtlink,zbt-wr8305rt", "ralink,mt7620n-soc";
- model = "Zbtlink ZBT-WR8305RT";
-
- aliases {
- led-boot = &led_sys;
- led-failsafe = &led_sys;
- led-running = &led_sys;
- led-upgrade = &led_sys;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_sys: sys {
- label = "zbt-wr8305rt:green:sys";
- gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- };
-
- lan {
- label = "zbt-wr8305rt:green:usb";
- gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>;
- linux,default-trigger = "usbport";
- };
-
- wifi {
- label = "zbt-wr8305rt:green:wifi";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-ðernet {
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "llllw";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- default {
- ralink,group = "i2c", "uartf", "spi refclk", "wled";
- ralink,function = "gpio";
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "zte,q7", "ralink,mt7620a-soc";
- model = "ZTE Q7";
-
- aliases {
- led-boot = &led_status_blue;
- led-failsafe = &led_status_blue;
- led-running = &led_status_blue;
- led-upgrade = &led_status_blue;
- };
-
- leds {
- compatible = "gpio-leds";
-
- statred {
- label = "zte-q7:red:status";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- };
-
- led_status_blue: statblue {
- label = "zte-q7:blue:status";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&gpio0 {
- status = "okay";
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "wllll";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&sdhci {
- status = "okay";
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-&gsw {
- mediatek,port4 = "ephy";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620n.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "zyxel,keenetic-omni", "ralink,mt7620n-soc";
- model = "ZyXEL Keenetic Omni";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- leds {
- compatible = "gpio-leds";
-
- wan {
- label = "kn_rc:green:wan";
- gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- };
-
- usb {
- label = "kn_rc:green:usb";
- gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>;
- linux,default-trigger = "usbport";
- };
-
- wifi {
- label = "kn_rc:green:wifi";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
-
- led_power: power {
- label = "kn_rc:green:power";
- gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- fn {
- label = "fn";
- gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- };
- };
-
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- usb_power {
- gpio-export,name = "usb";
- gpio-export,output = <1>;
- gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "wdt", "pa", "spi refclk", "wled";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "llllw";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620n.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "zyxel,keenetic-omni-ii", "ralink,mt7620n-soc";
- model = "ZyXEL Keenetic Omni II";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- leds {
- compatible = "gpio-leds";
-
- wan {
- label = "kn_rc:green:wan";
- gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- };
-
- usb {
- label = "kn_rc:green:usb";
- gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>;
- linux,default-trigger = "usbport";
- };
-
- wifi {
- label = "kn_rc:green:wifi";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
-
- led_power: power {
- label = "kn_rc:green:power";
- gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- fn {
- label = "fn";
- gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- };
- };
-
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- usb_power {
- gpio-export,name = "usb";
- gpio-export,output = <1>;
- gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio3 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "wdt", "pa", "spi refclk", "wled";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "wllll";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "zyxel,keenetic-viva", "ralink,mt7620a-soc";
- model = "ZyXEL Keenetic Viva";
-
- aliases {
- led-boot = &led_power_green;
- led-failsafe = &led_power_green;
- led-running = &led_power_green;
- led-upgrade = &led_power_green;
- };
-
- leds {
- compatible = "gpio-leds";
-
- wan {
- label = "kng_rc:green:wan";
- gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- };
-
- usb {
- label = "kng_rc:green:usb";
- gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>;
- linux,default-trigger = "usbport";
- };
-
- power_alert {
- label = "kng_rc:red:power";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- };
-
- wifi {
- label = "kng_rc:green:wifi";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
-
- led_power_green: power {
- label = "kng_rc:green:power";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- fn {
- label = "fn";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- };
- };
-
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- usb_power {
- gpio-export,name = "usb";
- gpio-export,output = <1>;
- gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
- };
- };
-
- rtl8367rb {
- compatible = "realtek,rtl8367b";
- cpu_port = <7>;
- realtek,extif2 = <1 0 1 1 1 1 1 1 2>;
- mii-bus = <&mdio0>;
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0xfb0000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii2_pins &mdio_pins>;
- mtd-mac-address = <&factory 0x00004>;
-
- port@4 {
- status = "okay";
- mediatek,fixed-link = <1000 1 1 1>;
- phy-mode = "rgmii";
- phy-handle = <&phy4>;
- };
-
- mdio0: mdio-bus {
- status = "okay";
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- phy-mode = "rgmii";
- };
- };
-};
-
-&gsw {
- mediatek,port4 = "gmac";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "aigale,ai-br100", "ralink,mt7620a-soc";
+ model = "Aigale Ai-BR100";
+
+ aliases {
+ led-boot = &led_wlan;
+ led-failsafe = &led_wlan;
+ led-running = &led_wlan;
+ led-upgrade = &led_wlan;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wan {
+ label = "ai-br100:blue:wan";
+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+ };
+
+ led_wlan: wlan {
+ label = "ai-br100:blue:wlan";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x20000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "u-boot-env";
+ reg = <0x20000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@30000 {
+ label = "factory";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ partition@40000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x40000 0x7c0000>;
+ };
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "llllw";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
--- /dev/null
+/*
+ * BSD LICENSE
+ *
+ * Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the names of the copyright holders nor the names of any
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "alfa-network,ac1200rm", "ralink,mt7620a-soc";
+ model = "ALFA Network AC1200RM";
+
+ aliases {
+ led-boot = &led_wps;
+ led-failsafe = &led_wps;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wlan2g {
+ label = "ac1200rm:green:wlan2g";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+
+ led_wps: wps {
+ label = "ac1200rm:green:wps";
+ gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+ mediatek,portmap = "llllw";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&gsw {
+ mediatek,port4 = "ephy";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+
+ led {
+ led-sources = <2>;
+ led-active-low;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "nd_sd", "spi refclk", "wled";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x1000>;
+ };
+
+ partition@31000 {
+ label = "config";
+ reg = <0x31000 0xf000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+ };
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "alfa-network,tube-e4g", "ralink,mt7620a-soc";
+ model = "ALFA Network Tube-E4G";
+
+ aliases {
+ led-boot = &power;
+ led-failsafe = &power;
+ led-running = &power;
+ led-upgrade = &power;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ modem-enable {
+ gpio-export,name = "modem-enable";
+ gpio-export,output = <1>;
+ gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ modem-rf-enable {
+ gpio-export,name = "modem-rf-enable";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ sim-select {
+ gpio-export,name = "sim-select";
+ gpio-export,output = <0>;
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ };
+
+ sim1-detect {
+ gpio-export,name = "sim1-detect";
+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ sim2-detect {
+ gpio-export,name = "sim2-detect";
+ gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ 4g {
+ label = "tube-e4g:green:4g";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "tube-e4g:blue:lan";
+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+ };
+
+ power: power {
+ label = "tube-e4g:green:power";
+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+
+ sim1 {
+ label = "tube-e4g:green:sim1";
+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+
+ sim2 {
+ label = "tube-e4g:green:sim2";
+ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gsw {
+ mediatek,port4 = "ephy";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&pcie {
+ status = "disabled";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "ephy", "nd_sd", "pcie", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x1000>;
+ };
+
+ partition@31000 {
+ label = "config";
+ reg = <0x31000 0xf000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "disabled";
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "asus,rp-n53", "ralink,mt7620a-soc";
+ model = "Asus RP-N53";
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ touch {
+ label = "touch";
+ gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ audio {
+ label = "audio";
+ gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+ linux,code = <BTN_1>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ backlight {
+ label = "rp-n53:white:back";
+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi0 {
+ label = "rp-n53:blue:5g3";
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi1 {
+ label = "rp-n53:blue:5g2";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi2 {
+ label = "rp-n53:blue:5g1";
+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi3 {
+ label = "rp-n53:blue:wifi";
+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi4 {
+ label = "rp-n53:blue:2g1";
+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi5 {
+ label = "rp-n53:blue:2g2";
+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi6 {
+ label = "rp-n53:blue:2g3";
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&i2c {
+ status = "okay";
+};
+
+&i2s {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcm_i2s_pins>;
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+&pcm {
+ status = "okay";
+};
+
+&gdma {
+ status = "okay";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "mdio", "rgmii1";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&gsw {
+ mediatek,port4 = "ephy";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi@0,0 {
+ compatible = "pci1814,5592";
+ reg = <0x0000 0 0 0 0>;
+ ralink,2ghz = <0>;
+ ralink,mtd-eeprom = <&factory 0x8000>;
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "asus,rt-ac51u", "ralink,mt7620a-soc";
+ model = "Asus RT-AC51U";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "rt-ac51u:blue:power";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ usb {
+ label = "rt-ac51u:blue:usb";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ wifi {
+ label = "rt-ac51u:blue:wifi";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ enable-leds {
+ gpio-export,name = "enable-leds";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+ðernet {
+ status = "okay";
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "wllll";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "wled", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "bdcom,wap2100-sk", "ralink,mt7620a-soc";
+ model = "BDCOM WAP2100-SK";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ usb {
+ label = "wap2100-sk:green:usb";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ led_power: wps {
+ label = "wap2100-sk:green:wps";
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan2g {
+ label = "wap2100-sk:green:wlan2g";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xf70000>;
+ };
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&sdhci {
+ status = "okay";
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "llllw";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "spi refclk", "uartf", "wled";
+ ralink,function = "gpio";
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "buffalo,whr-1166d", "ralink,mt7620a-soc";
+ model = "Buffalo WHR-1166D";
+
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_green;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_green;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "whr-1166d:red:power";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi {
+ label = "whr-1166d:green:wifi";
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_green: power2 {
+ label = "whr-1166d:green:power";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi2 {
+ label = "whr-1166d:orange:wifi";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ };
+
+ internet {
+ label = "whr-1166d:green:internet";
+ gpios = <&gpio2 17 GPIO_ACTIVE_LOW>;
+ };
+
+ router {
+ label = "whr-1166d:orange:router";
+ gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
+ };
+
+ router2 {
+ label = "whr-1166d:green:router";
+ gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ aoss {
+ label = "aoss";
+ gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ ap {
+ label = "ap";
+ gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
+ };
+
+ bridge {
+ label = "bridge";
+ gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
+ };
+ };
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf", "wled", "nd_sd";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii1_pins &mdio_pins>;
+
+ port@5 {
+ status = "okay";
+ phy-handle = <&phy5>;
+ phy-mode = "rgmii";
+ };
+
+ mdio-bus {
+ status = "okay";
+
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ phy-mode = "rgmii-rxid";
+ };
+ };
+};
+
+&gsw {
+ mediatek,port4 = "ephy";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi@0,0 {
+ compatible = "pci0,0";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "buffalo,whr-300hp2", "ralink,mt7620a-soc";
+ model = "Buffalo WHR-300HP2";
+
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_green;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_green;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "whr-300hp2:red:power";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi {
+ label = "whr-300hp2:green:wifi";
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_green: power2 {
+ label = "whr-300hp2:green:power";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi2 {
+ label = "whr-300hp2:orange:wifi";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ };
+
+ internet {
+ label = "whr-300hp2:green:internet";
+ gpios = <&gpio2 17 GPIO_ACTIVE_LOW>;
+ };
+
+ router {
+ label = "whr-300hp2:green:router";
+ gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
+ };
+
+ router2 {
+ label = "whr-300hp2:orange:router";
+ gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ aoss {
+ label = "aoss";
+ gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ ap {
+ label = "ap";
+ gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
+ };
+
+ bridge {
+ label = "bridge";
+ gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
+ };
+ };
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mediatek,portmap = "llllw";
+};
+
+&gsw {
+ mediatek,port4 = "ephy";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pa_pins>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "buffalo,whr-600d", "ralink,mt7620a-soc";
+ model = "Buffalo WHR-600D";
+
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_green;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_green;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "whr-600d:red:power";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi {
+ label = "whr-600d:green:wifi";
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_green: power2 {
+ label = "whr-600d:green:power";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi2 {
+ label = "whr-600d:orange:wifi";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ };
+
+ internet {
+ label = "whr-600d:green:internet";
+ gpios = <&gpio2 17 GPIO_ACTIVE_LOW>;
+ };
+
+ router {
+ label = "whr-600d:green:router";
+ gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
+ };
+
+ router2 {
+ label = "whr-600d:orange:router";
+ gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ aoss {
+ label = "aoss";
+ gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ ap {
+ label = "ap";
+ gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
+ };
+
+ bridge {
+ label = "bridge";
+ gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
+ };
+ };
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "llllw";
+};
+
+&gsw {
+ mediatek,port4 = "ephy";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi@0,0 {
+ compatible = "pci1814,5592";
+ reg = <0x0000 0 0 0 0>;
+ ralink,mtd-eeprom = <&factory 0x8000>;
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "dlink,dch-m225", "ralink,mt7620a-soc";
+ model = "D-Link DCH-M225";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "dch-m225:green:power";
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ status {
+ label = "dch-m225:red:status";
+ gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "Audio-I2S";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&dailink0_master>;
+ simple-audio-card,frame-master = <&dailink0_master>;
+ simple-audio-card,widgets =
+ "Headphone", "Headphones";
+ simple-audio-card,routing =
+ "Headphones", "HP_L",
+ "Headphones", "HP_R";
+ simple-audio-card,mclk-fs = <256>;
+ simple-audio-card,hp-det-gpio = <&gpio0 14 GPIO_ACTIVE_LOW>;
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s>;
+ };
+
+ dailink0_master: simple-audio-card,codec {
+ sound-dai = <&codec>;
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&i2c {
+ status = "okay";
+
+ codec: wm8960@1a {
+ #sound-dai-cells = <0>;
+ compatible = "wlf,wm8960";
+ reg = <0x1a>;
+
+ wlf,shared-lrclk;
+ };
+};
+
+&i2s {
+ #sound-dai-cells = <0>;
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mdio_refclk_pins>;
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <80000000>;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x4000>;
+ read-only;
+ };
+
+ factory: partition@34000 {
+ label = "factory";
+ reg = <0x34000 0x4000>;
+ read-only;
+ };
+
+ nvram: partition@38000 {
+ label = "nvram";
+ reg = <0x38000 0x8000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "devconf";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "upgrade_rec";
+ reg = <0x50000 0x100000>;
+ read-only;
+ };
+
+ partition@150000 {
+ compatible = "seama";
+ label = "firmware";
+ reg = <0x150000 0x6b0000>;
+ };
+ };
+ };
+};
+
+&gdma {
+ status = "okay";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "wdt", "rgmii1";
+ ralink,function = "gpio";
+ };
+
+ gpio_i2s {
+ ralink,group = "uartf";
+ ralink,function = "gpio i2s";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&gsw {
+ ralink,port4 = "ephy";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pa_pins>;
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ compatible = "dlink,dir-510l", "ralink,mt7620a-soc";
+ model = "D-Link DIR-510L";
+
+ aliases {
+ led-boot = &led_status;
+ led-failsafe = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_status;
+ };
+
+ chosen {
+ bootargs = "console=ttyS1,57600";
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status: status {
+ label = "dir-510l:green:status";
+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ };
+
+ status-red {
+ label = "dir-510l:red:status";
+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ };
+};
+
+ðernet {
+ mediatek,portmap = "llllw";
+};
+
+&uart {
+ status = "okay";
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "jboot";
+ reg = <0x0 0x10000>;
+ read-only;
+ };
+
+ partition@10000 {
+ label = "recovery";
+ reg = <0x10000 0x200000>;
+ read-only;
+ };
+
+ partition@210000 {
+ compatible = "amit,jimage";
+ label = "firmware";
+ reg = <0x210000 0xde0000>;
+ };
+
+ config: partition@ff0000 {
+ label = "config";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ mt76x0e@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mtd-mac-address = <&config 0xe490>;
+ mtd-mac-address-increment = <(2)>;
+ mediatek,mtd-eeprom = <&config 0xe05d>;
+ };
+};
+
+&gsw {
+ mediatek,port4 = "ephy";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "i2c", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "dlink,dir-810l", "ralink,mt7620a-soc";
+ model = "D-Link DIR-810L";
+
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_green;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_green;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power_green: power {
+ label = "dir-810l:green:power";
+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan {
+ label = "dir-810l:orange:wan";
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ power2 {
+ label = "dir-810l:orange:power";
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ factory5g: partition@50000 {
+ label = "factory5g";
+ reg = <0x50000 0x10000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "Wolf_Config";
+ reg = <0x60000 0x10000>;
+ read-only;
+ };
+
+ partition@70000 {
+ label = "MyDlink";
+ reg = <0x70000 0x80000>;
+ read-only;
+ };
+
+ partition@e0000 {
+ label = "Jffs2";
+ reg = <0xe0000 0x80000>;
+ read-only;
+ };
+
+ partition@170000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x170000 0x690000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "mdio", "rgmii1", "i2c", "wled", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+ mediatek,portmap = "llllw";
+};
+
+&gsw {
+ mediatek,port4 = "ephy";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+};
+
+&pcie {
+ status = "okay";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pcie0 {
+ wifi@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "dlink,dwr-118-a1", "ralink,mt7620a-soc";
+ model = "D-Link DWR-118 A1";
+
+ aliases {
+ led-boot = &led_internet;
+ led-failsafe = &led_internet;
+ led-upgrade = &led_internet;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wan {
+ label = "dwr-118-a1:green:wan";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+
+ led_internet: internet {
+ label = "dwr-118-a1:green:internet";
+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "dwr-118-a1:green:lan";
+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan2g {
+ label = "dwr-118-a1:green:wlan2g";
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ };
+
+ usb {
+ label = "dwr-118-a1:green:usb";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ usb {
+ gpio-export,name = "usb";
+ gpio-export,output = <0>;
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <80000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "jboot";
+ reg = <0x0 0x10000>;
+ read-only;
+ };
+
+ partition@10000 {
+ compatible = "amit,jimage";
+ label = "firmware";
+ reg = <0x10000 0xfe0000>;
+ };
+
+ config: partition@ff0000 {
+ label = "config";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "ephy", "uartf", "spi refclk", "wled";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mtd-mac-address = <&config 0xe496>;
+ mtd-mac-address-increment = <(2)>;
+ mediatek,mtd-eeprom = <&config 0xe083>;
+
+ led {
+ led-sources = <0>;
+ led-active-low;
+ };
+ };
+};
+
+ðernet {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+
+ port@4 {
+ status = "okay";
+ phy-handle = <&phy4>;
+ phy-mode = "rgmii";
+ };
+
+ port@5 {
+ status = "okay";
+ phy-handle = <&phy5>;
+ phy-mode = "rgmii";
+ };
+
+ mdio-bus {
+ status = "okay";
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "rgmii-rxid";
+ };
+
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ phy-mode = "rgmii-rxid";
+ };
+ };
+};
+
+&gsw {
+ mediatek,port4 = "gmac";
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "dlink,dwr-118-a2", "ralink,mt7620a-soc";
+ model = "D-Link DWR-118 A2";
+
+ aliases {
+ led-boot = &led_internet;
+ led-failsafe = &led_internet;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wan {
+ label = "dwr-118-a2:green:wan";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+
+ led_internet: internet {
+ label = "dwr-118-a2:green:internet";
+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "dwr-118-a2:green:lan";
+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan2g {
+ label = "dwr-118-a2:green:wlan2g";
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ };
+
+ usb {
+ label = "dwr-118-a2:green:usb";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ usb {
+ gpio-export,name = "usb";
+ gpio-export,output = <1>;
+ gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "jboot";
+ reg = <0x0 0x10000>;
+ read-only;
+ };
+
+ partition@10000 {
+ compatible = "amit,jimage";
+ label = "firmware";
+ reg = <0x10000 0xfe0000>;
+ };
+
+ config: partition@ff0000 {
+ label = "config";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "ephy", "uartf", "spi refclk", "wled";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ mtd-mac-address = <&config 0xe4a8>;
+ mtd-mac-address-increment = <(2)>;
+
+ led {
+ led-sources = <2>;
+ led-active-low;
+ };
+ };
+};
+
+ðernet {
+ status = "okay";
+ mediatek,portmap = "wllll";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii1_pins &mdio_pins>;
+
+ port@4 {
+ status = "okay";
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii";
+ };
+
+ mdio-bus {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "rgmii-rxid";
+ };
+ };
+};
+
+&gsw {
+ mediatek,port4 = "gmac";
+ mediatek,ephy-base-address = /bits/ 16 < 2 >;
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "dovado,tiny-ac", "ralink,mt7620a-soc";
+ model = "Dovado Tiny AC";
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ usb {
+ label = "tiny-ac:green:usb";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ wifi {
+ label = "tiny-ac:orange:wifi";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ usbpower {
+ gpio-export,name = "usbpower";
+ gpio-export,output = <1>;
+ gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+ðernet {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+ mediatek,portmap = "llllw";
+
+ port@4 {
+ status = "okay";
+ phy-mode = "rgmii";
+ phy-handle = <&phy4>;
+ };
+
+ port@5 {
+ status = "okay";
+ phy-mode = "rgmii";
+ phy-handle = <&phy5>;
+ };
+
+ mdio-bus {
+ status = "okay";
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "rgmii";
+ };
+
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ phy-mode = "rgmii";
+ };
+ };
+};
+
+&gsw {
+ mediatek,port4 = "gmac";
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "uartf", "nd_sd", "wled";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+};
--- /dev/null
+/*
+ * Device Tree file for the Edimax BR-6478AC V2
+ * based on Linksys E1700
+ *
+ * Copyright (C) 2016 Rohan Murch <rohan.murch@gmail.com>
+ * Copyright (C) 2016 Hans Ulli Kroll <ulli.kroll@googlemail.com>
+ * Copyright (C) 2017 James McKenzie <openwrt@madingley.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "edimax,br-6478ac-v2", "ralink,mt7620a-soc";
+ model = "Edimax BR-6478AC v2";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset_wps {
+ label = "reset_wps";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "br-6478ac-v2:white:power";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+ internet {
+ label = "br-6478ac-v2:blue:internet";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ };
+ wlan {
+ label = "br-6478ac-v2:blue:wlan";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ };
+ usb {
+ label = "br-6478ac-v2:blue:usb";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
+ };
+ };
+
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+ usb-power {
+ gpio-export,name="usb-power";
+ gpio-export,output=<1>;
+ gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+
+&gpio2 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "cimage";
+ reg = <0x50000 0x20000>;
+ read-only;
+ };
+
+ partition@70000 {
+ compatible = "edimax,uimage";
+ label = "firmware";
+ reg = <0x00070000 0x00790000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf", "nd_sd";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ status = "okay";
+ mtd-mac-address = <&factory 0x4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+ mediatek,portmap = "wllll";
+
+ port@5 {
+ status = "okay";
+ mediatek,fixed-link = <1000 1 1 1>;
+ phy-mode = "rgmii";
+ };
+
+ mdio-bus {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "rgmii";
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ phy-mode = "rgmii";
+ };
+
+ phy2: ethernet-phy@2 {
+ reg = <2>;
+ phy-mode = "rgmii";
+ };
+
+ phy3: ethernet-phy@3 {
+ reg = <3>;
+ phy-mode = "rgmii";
+ };
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "rgmii";
+ };
+
+ phy1f: ethernet-phy@1f {
+ reg = <0x1f>;
+ phy-mode = "rgmii";
+ };
+ };
+};
+
+&gsw {
+ mediatek,port4 = "gmac";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ mediatek,2ghz = <0>;
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+
+#include "mt7620a_edimax_ew-747x.dtsi"
+
+/ {
+ compatible = "edimax,ew-7476rpc", "ralink,mt7620a-soc";
+ model = "Edimax EW-7476RPC";
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "ew-7476rpc:green:power";
+ gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "ew-7476rpc:green:lan";
+ gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan2g {
+ label = "ew-7476rpc:blue:wlan2g";
+ gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1radio";
+ };
+
+ wlan5g {
+ label = "ew-7476rpc:blue:wlan5g";
+ gpios = <&gpio2 31 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0radio";
+ };
+
+ wps {
+ label = "ew-7476rpc:green:wps";
+ gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+ };
+
+ crossband {
+ label = "ew-7476rpc:green:crossband";
+ gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+
+#include "mt7620a_edimax_ew-747x.dtsi"
+
+/ {
+ compatible = "edimax,ew-7478ac", "ralink,mt7620a-soc";
+ model = "Edimax EW-7478AC";
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "ew-7478ac:green:power";
+ gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "ew-7478ac:green:lan";
+ gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan2g {
+ label = "ew-7478ac:blue:wlan2g";
+ gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1radio";
+ };
+
+ wlan5g {
+ label = "ew-7478ac:blue:wlan5g";
+ gpios = <&gpio2 31 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0radio";
+ };
+
+ wps {
+ label = "ew-7478ac:green:wps";
+ gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+ };
+
+ crossband {
+ label = "ew-7478ac:green:crossband";
+ gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "edimax,ew-7478apc", "ralink,mt7620a-soc";
+ model = "Edimax EW-7478APC";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset_wps {
+ label = "reset_wps";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "ew-7478apc:white:power";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+
+ internet {
+ label = "ew-7478apc:blue:internet";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "ew-7478apc:blue:wlan";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ };
+
+ usb {
+ label = "ew-7478apc:blue:usb";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
+ };
+ };
+};
+
+&gpio2 {
+ status = "okay";
+
+ enable_usb_power {
+ gpio-hog;
+ line-name = "enable USB power";
+ gpios = <5 GPIO_ACTIVE_HIGH>;
+ output-high;
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "cimage";
+ reg = <0x50000 0x20000>;
+ read-only;
+ };
+
+ partition@70000 {
+ compatible = "edimax,uimage";
+ label = "firmware";
+ reg = <0x00070000 0x00790000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf", "nd_sd";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ status = "okay";
+ mtd-mac-address = <&factory 0x4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+ mediatek,portmap = "wllll";
+
+ port@5 {
+ status = "okay";
+ mediatek,fixed-link = <1000 1 1 1>;
+ phy-mode = "rgmii";
+ };
+
+ mdio-bus {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "rgmii";
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ phy-mode = "rgmii";
+ };
+
+ phy2: ethernet-phy@2 {
+ reg = <2>;
+ phy-mode = "rgmii";
+ };
+
+ phy3: ethernet-phy@3 {
+ reg = <3>;
+ phy-mode = "rgmii";
+ };
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "rgmii";
+ };
+
+ phy1f: ethernet-phy@1f {
+ reg = <0x1f>;
+ phy-mode = "rgmii";
+ };
+ };
+};
+
+&gsw {
+ mediatek,port4 = "gmac";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ mediatek,2ghz = <0>;
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "ralink,mt7620a-soc";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset_wps {
+ label = "reset_wps";
+ gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ switch_high {
+ label = "switch high";
+ gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
+ };
+
+ switch_off {
+ label = "switch off";
+ gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_1>;
+ linux,input-type = <EV_SW>;
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "cimage";
+ reg = <0x50000 0x20000>;
+ read-only;
+ };
+
+ partition@70000 {
+ compatible = "edimax,uimage";
+ label = "firmware";
+ reg = <0x00070000 0x00790000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf", "nd_sd", "rgmii2";
+ ralink,function = "gpio";
+ };
+ };
+
+ phy_reset_pins: phy-reset {
+ gpio {
+ ralink,group = "spi refclk";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+
+ status = "okay";
+ mtd-mac-address = <&factory 0x4>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii1_pins &mdio_pins &phy_reset_pins>;
+
+ mediatek,portmap = "l";
+ mediatek,mdio-mode = <1>;
+
+ phy-reset-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ phy-reset-duration = <30>;
+
+ port@5 {
+ status = "okay";
+ mediatek,fixed-link = <1000 1 1 1>;
+ phy-mode = "rgmii";
+ };
+
+ mdio-bus {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ status = "disabled";
+ reg = <0>;
+ phy-mode = "rgmii";
+ };
+
+ phy1: ethernet-phy@1 {
+ status = "disabled";
+ reg = <1>;
+ phy-mode = "rgmii";
+ };
+
+ phy2: ethernet-phy@2 {
+ status = "disabled";
+ reg = <2>;
+ phy-mode = "rgmii";
+ };
+
+ phy3: ethernet-phy@3 {
+ status = "disabled";
+ reg = <3>;
+ phy-mode = "rgmii";
+ };
+
+ phy4: ethernet-phy@4 {
+ status = "disabled";
+ reg = <4>;
+ phy-mode = "rgmii";
+ };
+ };
+};
+
+&gsw {
+ mediatek,port5 = "gmac";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ mediatek,2ghz = <0>;
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "glinet,gl-mt300a", "ralink,mt7620a-soc";
+ model = "GL-MT300A";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wan {
+ label = "gl-mt300a:wan";
+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "gl-mt300a:lan";
+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "gl-mt300a:wlan";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+
+ usb {
+ label = "gl-mt300a:usb";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+ reset {
+ label = "reset";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ BTN_0 {
+ label = "BTN_0";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ BTN_1 {
+ label = "BTN_1";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_1>;
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xf80000>;
+ };
+
+ partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x10000>;
+ };
+ };
+ };
+};
+
+&sdhci {
+ status = "okay";
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4000>;
+ mediatek,portmap = "wllll";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "wled","ephy","uartf","i2c";
+ ralink,function = "gpio";
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "glinet,gl-mt300n", "ralink,mt7620a-soc";
+ model = "GL-MT300N";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wan {
+ label = "gl-mt300n:wan";
+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "gl-mt300n:lan";
+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "gl-mt300n:wlan";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ BTN_0 {
+ label = "BTN_0";
+ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ BTN_1 {
+ label = "BTN_1";
+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_1>;
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xf80000>;
+ };
+
+ partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x10000>;
+ };
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4000>;
+ mediatek,portmap = "wllll";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "wled","ephy","i2c";
+ ralink,function = "gpio";
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "glinet,gl-mt750", "ralink,mt7620a-soc";
+ model = "GL-MT750";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wan {
+ label = "gl-mt750:wan";
+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "gl-mt750:lan";
+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "gl-mt750:wlan";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+ reset {
+ label = "reset";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ BTN_0 {
+ label = "BTN_0";
+ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ BTN_1 {
+ label = "BTN_1";
+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_1>;
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xf80000>;
+ };
+
+ partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x10000>;
+ };
+ };
+ };
+};
+
+&sdhci {
+ status = "okay";
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4000>;
+ mediatek,portmap = "llllw";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "wled","ephy","uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "head-weblink,hdrm200", "ralink,mt7620a-soc";
+ model = "Head Weblink HDRM200";
+
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ chosen {
+ bootargs = "console=ttyS1,57600";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ rssi {
+ label = "hdrm200:red:rssi";
+ gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
+ };
+
+ led_system: system {
+ label = "hdrm200:green:system";
+ gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+ };
+
+ air {
+ label = "hdrm200:green:wifi";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ firmware: partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&sdhci {
+ status = "okay";
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+ðernet {
+ status = "okay";
+
+ mtd-mac-address = <&factory 0x4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+
+ port@4 {
+ status = "okay";
+ phy-handle = <&phy4>;
+ phy-mode = "rgmii";
+ };
+
+ port@5 {
+ status = "okay";
+ phy-handle = <&phy5>;
+ phy-mode = "rgmii";
+ };
+
+ mdio-bus {
+ status = "okay";
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "rgmii";
+ };
+
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ phy-mode = "rgmii";
+ };
+ };
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "i2c", "uartf", "pa", "spi refclk",
+ "wled";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi@0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+};
+
+&uart {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a_hiwifi_hc5x61.dtsi"
+
+/ {
+ compatible = "hiwifi,hc5661", "hiwifi,hc5x61", "ralink,mt7620a-soc";
+ model = "HiWiFi HC5661";
+
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "hc5661:blue:system";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ internet {
+ label = "hc5661:blue:internet";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan2g {
+ label = "hc5661:blue:wlan2g";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan5g {
+ label = "hc5661:blue:wlan5g";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a_hiwifi_hc5x61.dtsi"
+
+/ {
+ compatible = "hiwifi,hc5761", "hiwifi,hc5x61", "ralink,mt7620a-soc";
+ model = "HiWiFi HC5761";
+
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "hc5761:blue:system";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ internet {
+ label = "hc5761:blue:internet";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan2g {
+ label = "hc5761:blue:wlan2g";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan5g {
+ label = "hc5761:blue:wlan5g";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a_hiwifi_hc5x61.dtsi"
+
+/ {
+ compatible = "hiwifi,hc5861", "hiwifi,hc5x61", "ralink,mt7620a-soc";
+ model = "HiWiFi HC5861";
+
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "hc5861:blue:system";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan2g {
+ label = "hc5861:blue:wlan2g";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+
+ internet {
+ label = "hc5861:blue:internet";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan5g {
+ label = "hc5861:blue:wlan5g";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ };
+
+ turbo {
+ label = "hc5861:blue:turbo";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ usbpower {
+ gpio-export,name = "usbpower";
+ gpio-export,output = <0>;
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+
+ sdpower {
+ gpio-export,name = "sdpower";
+ gpio-export,output = <0>;
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+ðernet {
+ status = "okay";
+ mtd-mac-address = <&factory 0x4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii1_pins &mdio_pins>;
+ mediatek,portmap = "wllll";
+
+ port@5 {
+ status = "okay";
+ phy-handle = <&phy5>;
+ phy-mode = "rgmii";
+ };
+
+ mdio-bus {
+ status = "okay";
+
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ phy-mode = "rgmii";
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi@0,0 {
+ compatible = "pci14c3,7662";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+};
--- /dev/null
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "hiwifi,hc5x61", "ralink,mt7620a-soc";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ usbpower {
+ gpio-export,name = "usbpower";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&sysc {
+ ralink,gpiomux = "i2c", "jtag";
+ ralink,uartmux = "gpio";
+ ralink,wdtmux = <1>;
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xf80000>;
+ };
+
+ partition@fd0000 {
+ label = "hwf_config";
+ reg = <0xfd0000 0x10000>;
+ read-only;
+ };
+
+ bdinfo: partition@fe0000 {
+ label = "bdinfo";
+ reg = <0xfe0000 0x10000>;
+ read-only;
+ };
+
+ partition@ff0000 {
+ label = "backup";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ðernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "wllll";
+};
+
+&sdhci {
+ status = "okay";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pa_pins>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "uartf", "wled";
+ ralink,function = "gpio";
+ };
+ };
+};
--- /dev/null
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2017 Kristian Evensen <kristian.evensen@gmail.com>.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "hnet,c108", "ralink,mt7620a-soc";
+ model = "HNET C108";
+
+ aliases {
+ led-boot = &led_lan_green;
+ led-failsafe = &led_lan_green;
+ led-running = &led_lan_green;
+ led-upgrade = &led_lan_green;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ power_modem {
+ gpio-export,name = "power_modem";
+ gpio-export,output = <1>;
+ gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ sdcard {
+ label = "c108:green:sdcard";
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ };
+
+ modem_green {
+ label = "c108:green:modem";
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ };
+
+ modem_red {
+ label = "c108:red:modem";
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ };
+
+ lan_red {
+ label = "c108:red:lan";
+ gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_lan_green: lan_green {
+ label = "c108:green:lan";
+ gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ en25q128@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+ };
+};
+
+&sdhci {
+ status = "okay";
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "i2c", "uartf", "spi refclk", "ephy";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "iodata,wn-ac1167gr", "ralink,mt7620a-soc";
+ model = "I-O DATA WN-AC1167GR";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "wn-ac1167gr:green:power";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wlan2g {
+ label = "wn-ac1167gr:green:wlan2g";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ };
+
+ notification {
+ label = "wn-ac1167gr:green:notification";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan5g {
+ label = "wn-ac1167gr:green:wlan5g";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ auto {
+ label = "auto";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ Factory: partition@40000 {
+ label = "Factory";
+ reg = <0x40000 0x8000>;
+ read-only;
+ };
+
+ iNIC_rf: partition@48000 {
+ label = "iNIC_rf";
+ reg = <0x48000 0x8000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "NoUsed";
+ reg = <0x50000 0x20000>;
+ read-only;
+ };
+
+ partition@70000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x70000 0x6b4000>;
+ };
+
+ partition@724000 {
+ label = "manufacture";
+ reg = <0x724000 0x8c000>;
+ read-only;
+ };
+
+ partition@7b0000 {
+ label = "backup";
+ reg = <0x7b0000 0x10000>;
+ read-only;
+ };
+
+ partition@7c0000 {
+ label = "storage";
+ reg = <0x7c0000 0x40000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ðernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii1_pins &mdio_pins>;
+ mtd-mac-address = <&Factory 0x4>;
+
+ port@5 {
+ status = "okay";
+ mediatek,fixed-link = <1000 1 1 1>;
+ phy-mode = "rgmii";
+ };
+
+ mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "rgmii";
+ };
+
+ ethernet-phy@1 {
+ reg = <1>;
+ phy-mode = "rgmii";
+ };
+
+ ethernet-phy@2 {
+ reg = <2>;
+ phy-mode = "rgmii";
+ };
+
+ ethernet-phy@3 {
+ reg = <3>;
+ phy-mode = "rgmii";
+ };
+
+ ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "rgmii";
+ };
+
+ ethernet-phy@1f {
+ reg = <0x1f>;
+ phy-mode = "rgmii";
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&iNIC_rf 0x0>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&Factory 0x0>;
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "iodata,wn-ac733gr3", "ralink,mt7620a-soc";
+ model = "I-O DATA WN-AC733GR3";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "wn-ac733gr3:green:power";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ notification {
+ label = "wn-ac733gr3:green:notification";
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan2g {
+ label = "wn-ac733gr3:green:wlan2g";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan5g {
+ label = "wn-ac733gr3:green:wlan5g";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ router {
+ label = "router";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
+ };
+
+ auto {
+ label = "auto";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
+ };
+ };
+
+ rtl8367rb {
+ compatible = "realtek,rtl8367b";
+ gpio-sda = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+ gpio-sck = <&gpio0 23 GPIO_ACTIVE_HIGH>;
+ realtek,extif1 = <1 0 1 1 1 1 1 1 2>;
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ Factory: partition@40000 {
+ label = "Factory";
+ reg = <0x40000 0x8000>;
+ read-only;
+ };
+
+ iNIC_rf: partition@48000 {
+ label = "iNIC_rf";
+ reg = <0x48000 0x8000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x6d4000>;
+ };
+
+ partition@724000 {
+ label = "manufacture";
+ reg = <0x724000 0x8c000>;
+ read-only;
+ };
+
+ partition@7b0000 {
+ label = "backup";
+ reg = <0x7b0000 0x10000>;
+ read-only;
+ };
+
+ partition@7c0000 {
+ label = "storage";
+ reg = <0x7c0000 0x40000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ðernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii1_pins>;
+ mtd-mac-address = <&Factory 0x4>;
+
+ port@5 {
+ status = "okay";
+ mediatek,fixed-link = <1000 1 1 1>;
+ phy-mode = "rgmii";
+ };
+};
+
+&gpio0 {
+ rtl8367rb_reset {
+ gpio-hog;
+ gpios = <0 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "rtl8367rb-reset";
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf", "mdio";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi@0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&iNIC_rf 0x0>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&Factory 0x0>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/{
+ compatible = "kimax,u25awf-h1","ralink,mt7620a-soc";
+ model = "Kimax U25AWF-H1";
+
+ aliases {
+ led-boot = &led_wifi;
+ led-failsafe = &led_wifi;
+ led-running = &led_wifi;
+ led-upgrade = &led_wifi;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_wifi: wifi {
+ label = "u25awf:red:wifi";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "u25awf:green:lan";
+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "uartf", "ephy", "wled";
+ ralink,function = "gpio";
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "lava,lr-25g001", "ralink,mt7620a-soc";
+ model = "LAVA LR-25G001";
+
+ aliases {
+ led-boot = &led_status;
+ led-failsafe = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_status;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status: status {
+ label = "lr-25g001:green:status";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi2g {
+ label = "lr-25g001:green:wifi2g";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi5g {
+ label = "lr-25g001:green:wifi5g";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ usbpower {
+ gpio-export,name = "usbpower";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "jboot";
+ reg = <0x0 0x10000>;
+ read-only;
+ };
+
+ partition@10000 {
+ compatible = "amit,jimage";
+ label = "firmware";
+ reg = <0x10000 0xfe0000>;
+ };
+
+ config: partition@ff0000 {
+ label = "config";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+ðernet {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+
+ port@5 {
+ status = "okay";
+ phy-mode = "rgmii";
+ mediatek,fixed-link = <1000 1 1 1>;
+ };
+
+ mdio-bus {
+ status = "okay";
+ mediatek,mdio-mode = <1>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "rgmii";
+ qca,ar8327-initvals = <
+ 0x04 0x87300000 /* PORT0 PAD MODE CTRL */
+ 0x0c 0x00000000 /* PORT6 PAD MODE CTRL */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ 0x94 0x00000000 /* PORT6_STATUS */
+ >;
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ phy-mode = "rgmii";
+ };
+
+ phy2: ethernet-phy@2 {
+ reg = <2>;
+ phy-mode = "rgmii";
+ };
+
+ phy3: ethernet-phy@3 {
+ reg = <3>;
+ phy-mode = "rgmii";
+ };
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "rgmii";
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ mt76x0e@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mtd-mac-address = <&config 0xe07e>;
+ mtd-mac-address-increment = <(2)>;
+ mediatek,mtd-eeprom = <&config 0xe08a>;
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "uartf", "i2c";
+ ralink,function = "gpio";
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a_lenovo_newifi-y1.dtsi"
+
+/ {
+ compatible = "lenovo,newifi-y1", "ralink,mt7620a-soc";
+ model = "Lenovo Y1";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "y1:blue:power";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan1 {
+ label = "y1:blue:wifi";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan2 {
+ label = "y1:blue:wifi5g";
+ gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+ };
+
+ usb {
+ label = "y1:blue:usb";
+ gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ lan {
+ label = "y1:blue:lan";
+ gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+ };
+
+ internet {
+ label = "y1:blue:internet";
+ gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+ðernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "llllw";
+};
--- /dev/null
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "lenovo,newifi-y1", "ralink,mt7620a-soc";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pa_pins>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "uartf", "wled", "nd_sd";
+ ralink,function = "gpio";
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a_lenovo_newifi-y1.dtsi"
+
+/ {
+ compatible = "lenovo,newifi-y1s", "lenovo,newifi-y1", "ralink,mt7620a-soc";
+ model = "Lenovo Y1S";
+
+ aliases {
+ led-boot = &led_power_blue;
+ led-failsafe = &led_power_blue;
+ led-running = &led_power_blue;
+ led-upgrade = &led_power_blue;
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ usb0 {
+ gpio-export,name = "usb0";
+ gpio-export,output = <1>;
+ gpios = <&gpio2 14 GPIO_ACTIVE_HIGH>;
+ };
+ usb1 {
+ gpio-export,name = "usb1";
+ gpio-export,output = <1>;
+ gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
+ };
+ usb2 {
+ gpio-export,name = "usb2";
+ gpio-export,output = <1>;
+ gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power1 {
+ label = "y1s:yellow:power";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_blue: power2 {
+ label = "y1s:blue:power";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan1 {
+ label = "y1s:yellow:wifi";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan2 {
+ label = "y1s:blue:wifi";
+ gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+ };
+
+ usb1 {
+ label = "y1s:yellow:usb";
+ gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
+ };
+
+ usb2 {
+ label = "y1s:blue:usb";
+ gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ internet {
+ label = "y1s:blue:internet";
+ gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+ðernet {
+ status = "okay";
+ mtd-mac-address = <&factory 0x4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+ mediatek,portmap = "wllll";
+
+ port@4 {
+ status = "okay";
+ phy-handle = <&phy4>;
+ phy-mode = "rgmii";
+ };
+
+ port@5 {
+ status = "okay";
+ phy-handle = <&phy5>;
+ phy-mode = "rgmii";
+ };
+
+ mdio-bus {
+ status = "okay";
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "rgmii";
+ };
+
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ phy-mode = "rgmii";
+ };
+ };
+};
+
+&gsw {
+ mediatek,port4 = "gmac";
+};
--- /dev/null
+/*
+ * Device Tree file for the Linksys E1700
+ *
+ * Copyright (C) 2014 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "linksys,e1700", "ralink,mt7620a-soc";
+ model = "Linksys E1700";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "e1700:green:power";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "e1700:green:wps";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "config";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ status = "okay";
+ mtd-mac-address = <&factory 0x28>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+
+ port@5 {
+ status = "okay";
+ mediatek,fixed-link = <1000 1 1 1>;
+ phy-mode = "rgmii";
+ };
+
+ mdio-bus {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "rgmii";
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ phy-mode = "rgmii";
+ };
+
+ phy2: ethernet-phy@2 {
+ reg = <2>;
+ phy-mode = "rgmii";
+ };
+
+ phy3: ethernet-phy@3 {
+ reg = <3>;
+ phy-mode = "rgmii";
+ };
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "rgmii";
+ };
+
+ phy1f: ethernet-phy@1f {
+ reg = <0x1f>;
+ phy-mode = "rgmii";
+ };
+ };
+};
+
+&gsw {
+ mediatek,port4 = "gmac";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "microduino,microwrt", "ralink,mt7620a-soc";
+ model = "Microduino MicroWRT";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x20000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "u-boot-env";
+ reg = <0x20000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@30000 {
+ label = "factory";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ partition@40000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x40000 0xfc0000>;
+ };
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+ðernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "llllw";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "wled", "i2c", "wdt", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
--- /dev/null
+/*
+ * Device Tree file for the Netgear EX2700
+ *
+ * Copyright (C) 2016 Joseph C. Lehner <joseph.c.lehner@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "netgear,ex2700", "ralink,mt7620a-soc";
+ model = "Netgear EX2700";
+
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_green;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_green;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power_green: power_g {
+ label = "ex2700:green:power";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ power_r {
+ label = "ex2700:red:power";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+
+ device_g {
+ label = "ex2700:green:device";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+
+ device_r {
+ label = "ex2700:red:device";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ };
+
+ router_g {
+ label = "ex2700:green:router";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ };
+
+ router_r {
+ label = "ex2700:red:router";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "ex2700:green:wps";
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ partition@40000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x40000 0x3b0000>;
+ };
+
+ art: partition@3f0000 {
+ label = "art";
+ reg = <0x3f0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&art 0x0>;
+};
+
+&wmac {
+ mtd-mac-address = <&art 0x6>;
+ ralink,mtd-eeprom = <&art 0x1000>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "i2c", "uartf", "spi refclk";
+ ralink,function = "gpio";
+ };
+ };
+};
--- /dev/null
+/* This file is released into the public domain */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "mt7620a.dtsi"
+
+/ {
+ compatible = "netgear,ex3700", "ralink,mt7620a-soc";
+ model = "Netgear EX3700/EX3800";
+
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_green;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_green;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power_green: power_g {
+ label = "ex3700:green:power";
+ gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ power_a {
+ label = "ex3700:amber:power";
+ gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+ };
+
+ router_g {
+ label = "ex3700:green:router";
+ gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+ };
+
+ router_r {
+ label = "ex3700:red:router";
+ gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+ };
+
+ device_g {
+ label = "ex3700:green:device";
+ gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
+ };
+
+ device_r {
+ label = "ex3700:red:device";
+ gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "ex3700:green:wps";
+ gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "config";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x790000>;
+ };
+
+ partition@7e0000 {
+ label = "board_data";
+ reg = <0x7e0000 0x10000>;
+ read-only;
+ };
+
+ partition@7f0000 {
+ label = "nvram";
+ reg = <0x7f0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0 >;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0x0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "i2c", "rgmii2", "spi refclk";
+ ralink,function = "gpio";
+ };
+ };
+};
--- /dev/null
+/* This file is released into the public domain */
+
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ compatible = "netgear,wn3000rp-v3", "ralink,mt7620a-soc";
+ model = "Netgear WN3000RP v3";
+
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_green;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_green;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power_green: power_g {
+ label = "wn3000rpv3:green:power";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ power_r {
+ label = "wn3000rpv3:red:power";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+
+ client_g {
+ label = "wn3000rpv3:green:client";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+
+ client_r {
+ label = "wn3000rpv3:red:client";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ };
+
+ router_g {
+ label = "wn3000rpv3:green:router";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ };
+
+ router_r {
+ label = "wn3000rpv3:red:router";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "wn3000rpv3:green:wps";
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ };
+
+ l_arrow {
+ label = "wn3000rpv3:blue:leftarrow";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ };
+
+ r_arrow {
+ label = "wn3000rpv3:blue:rightarrow";
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ partition@40000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x40000 0x7b0000>;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&art 0x0>;
+};
+
+&wmac {
+ mtd-mac-address = <&art 0x6>;
+ ralink,mtd-eeprom = <&art 0x1000>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "i2c", "uartf", "spi refclk";
+ ralink,function = "gpio";
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "ohyeah,oy-0001", "ralink,mt7620a-soc";
+ model = "OY-0001";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: powerled {
+ label = "oy-0001:green:power";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ wifiled {
+ label = "oy-0001:green:wifi";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ s1 {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mediatek,portmap = "llllw";
+};
+
+&gsw {
+ mediatek,port4 = "ephy";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&sdhci {
+ status = "okay";
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "phicomm,k2g", "ralink,mt7620a-soc";
+ model = "Phicomm K2G";
+
+ aliases {
+ led-boot = &led_blue;
+ led-failsafe = &led_blue;
+ led-running = &led_blue;
+ led-upgrade = &led_blue;
+ serial0 = &uartlite;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_blue: blue {
+ label = "k2g:blue:status";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ };
+
+ yellow {
+ label = "k2g:yellow:status";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+
+ red {
+ label = "k2g:red:status";
+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <24000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ reg = <0x0 0x30000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ partition@30000 {
+ reg = <0x30000 0x10000>;
+ label = "u-boot-env";
+ read-only;
+ };
+
+ factory: partition@40000 {
+ reg = <0x40000 0x10000>;
+ label = "factory";
+ read-only;
+ };
+
+ partition@50000 {
+ reg = <0x50000 0x50000>;
+ label = "permanent_config";
+ read-only;
+ };
+
+ partition@a0000 {
+ compatible = "denx,uimage";
+ reg = <0xa0000 0x760000>;
+ label = "firmware";
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii2_pins &mdio_pins>;
+ mtd-mac-address = <&factory 0x28>;
+ mediatek,portmap = "llllw";
+
+ port@5 {
+ status = "okay";
+ phy-handle = <&phy5>;
+ phy-mode = "rgmii";
+ };
+
+ mdio-bus {
+ status = "okay";
+
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ phy-mode = "rgmii";
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pa_pins>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "phicomm,psg1208", "ralink,mt7620a-soc";
+ model = "Phicomm PSG1208";
+
+ aliases {
+ led-boot = &led_wps;
+ led-failsafe = &led_wps;
+ led-running = &led_wps;
+ led-upgrade = &led_wps;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_wps: wps {
+ label = "psg1208:white:wps";
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "psg1208:white:wlan2g";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@30000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@40000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "spi refclk", "wled";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "llllw";
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
--- /dev/null
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "phicomm,psg1218", "ralink,mt7620a-soc";
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@30000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@40000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a_phicomm_psg1218.dtsi"
+
+/ {
+ compatible = "phicomm,psg1218a", "phicomm,psg1218", "ralink,mt7620a-soc";
+ model = "Phicomm PSG1218 rev.A";
+
+ aliases {
+ led-boot = &led_blue;
+ led-failsafe = &led_blue;
+ led-running = &led_blue;
+ led-upgrade = &led_blue;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led_blue: blue {
+ label = "psg1218a:blue:status";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ yellow {
+ label = "psg1218a:yellow:status";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+
+ red {
+ label = "psg1218a:red:status";
+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mtd-mac-address = <&factory 0x28>;
+ mediatek,portmap = "llllw";
+};
+
+&wmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pa_pins>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a_phicomm_psg1218.dtsi"
+
+/ {
+ compatible = "phicomm,psg1218b", "phicomm,psg1218", "ralink,mt7620a-soc";
+ model = "Phicomm PSG1218 rev.B";
+
+ aliases {
+ led-boot = &led_blue;
+ led-failsafe = &led_blue;
+ led-running = &led_blue;
+ led-upgrade = &led_blue;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led_blue: blue {
+ label = "psg1218b:blue:status";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ yellow {
+ label = "psg1218b:yellow:status";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+
+ red {
+ label = "psg1218b:red:status";
+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd", "pa";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mtd-mac-address = <&factory 0x28>;
+ mediatek,portmap = "llllw";
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "planex,cs-qr10", "ralink,mt7620a-soc";
+ model = "Planex CS-QR10";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "cs-qr10:red:power";
+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ s1 {
+ label = "reset";
+ gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ s2 {
+ label = "wps";
+ gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&i2c {
+ status = "okay";
+};
+
+&i2s {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcm_i2s_pins>;
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+&pcm {
+ status = "okay";
+};
+
+&gdma {
+ status = "okay";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi refclk", "rgmii1";
+ ralink,function = "gpio";
+ };
+ wdt {
+ ralink,group = "wdt";
+ ralink,function = "wdt refclk";
+ };
+ };
+};
+
+ðernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "llllw";
+};
+
+&gsw {
+ ralink,port4 = "ephy";
+};
+
+&sdhci {
+ status = "okay";
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "planex,db-wrt01", "ralink,mt7620a-soc";
+ model = "Planex DB-WRT01";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "db-wrt01:orange:power";
+ gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ s1 {
+ label = "wps";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "spi refclk", "rgmii1";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "llllw";
+};
+
+&gsw {
+ mediatek,port4 = "ephy";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "planex,mzk-750dhp", "ralink,mt7620a-soc";
+ model = "Planex MZK-750DHP";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wps {
+ label = "mzk-750dhp:green:wps";
+ gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power: power {
+ label = "mzk-750dhp:green:power";
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan5g {
+ label = "mzk-750dhp:green:wlan5g";
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ s1 {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ s2 {
+ label = "wps";
+ gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "spi refclk", "rgmii1", "nd_sd";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "llllw";
+};
+
+&gsw {
+ mediatek,port4 = "ephy";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "planex,mzk-ex300np", "ralink,mt7620a-soc";
+ model = "Planex MZK-EX300NP";
+
+ aliases {
+ led-boot = &led_wps;
+ led-failsafe = &led_wps;
+ led-running = &led_wps;
+ led-upgrade = &led_wps;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wifi {
+ label = "mzk-ex300np:green:wifi";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+
+ led_wps: wps {
+ label = "mzk-ex300np:green:wps";
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ };
+
+ rep {
+ label = "mzk-ex300np:blue:rep";
+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi1 {
+ label = "mzk-ex300np:blue:wifi1";
+ gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi2 {
+ label = "mzk-ex300np:blue:wifi2";
+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi3 {
+ label = "mzk-ex300np:blue:wifi3";
+ gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_RFKILL>;
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x730000>;
+ };
+
+ partition@780000 {
+ label = "Udata";
+ reg = <0x780000 0x80000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "spi refclk", "rgmii1", "wled";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "llllw";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "planex,mzk-ex750np", "ralink,mt7620a-soc";
+ model = "Planex MZK-EX750NP";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "mzk-ex750np:red:power";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi {
+ label = "mzk-ex750np:red:wifi";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "mzk-ex750np:green:wps";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ };
+
+ rep {
+ label = "mzk-ex750np:blue:rep";
+ gpios = <&gpio2 16 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi1 {
+ label = "mzk-ex750np:blue:wifi1";
+ gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi2 {
+ label = "mzk-ex750np:blue:wifi2";
+ gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi3 {
+ label = "mzk-ex750np:blue:wifi3";
+ gpios = <&gpio2 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_RFKILL>;
+ };
+ };
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x730000>;
+ };
+
+ partition@780000 {
+ label = "Udata";
+ reg = <0x780000 0x80000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "uartf", "nd_sd", "rgmii2", "wled";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "llllw";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "ralink,mt7620a-evb", "ralink,mt7620a-soc";
+ model = "Ralink MT7620a + MT7610e evaluation board";
+
+ keys {
+ compatible = "gpio-keys";
+ poll-interval = <20>;
+
+ s2 {
+ label = "S2";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ s3 {
+ label = "S3";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_1>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+ mediatek,portmap = "llllw";
+
+ port@4 {
+ status = "okay";
+ phy-mode = "rgmii";
+ phy-handle = <&phy4>;
+ };
+
+ port@5 {
+ status = "okay";
+ phy-mode = "rgmii";
+ phy-handle = <&phy5>;
+ };
+
+ mdio-bus {
+ status = "okay";
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "rgmii";
+ };
+
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ phy-mode = "rgmii";
+ };
+ };
+};
+
+&gsw {
+ mediatek,port4 = "gmac";
+};
+
+&sdhci {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+/ {
+ compatible = "ralink,mt7620a-mt7530-evb", "ralink,mt7620a-soc";
+ model = "Ralink MT7620a + MT7530 evaluation board";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+ mediatek,portmap = "llllw";
+
+ port@5 {
+ status = "okay";
+ mediatek,fixed-link = <1000 1 1 1>;
+ phy-mode = "rgmii";
+ };
+
+ mdio-bus {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "rgmii";
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ phy-mode = "rgmii";
+ };
+
+ phy2: ethernet-phy@2 {
+ reg = <2>;
+ phy-mode = "rgmii";
+ };
+
+ phy3: ethernet-phy@3 {
+ reg = <3>;
+ phy-mode = "rgmii";
+ };
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "rgmii";
+ };
+
+ phy1f: ethernet-phy@1f {
+ reg = <0x1f>;
+ phy-mode = "rgmii";
+ };
+ };
+};
+
+&gsw {
+ mediatek,port4 = "gmac";
+};
+
+&pcie {
+ status = "okay";
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "ralink,mt7620a-mt7610e-evb", "ralink,mt7620a-soc";
+ model = "Ralink MT7620A evaluation board";
+
+ keys {
+ compatible = "gpio-keys";
+ poll-interval = <20>;
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_1>;
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+ðernet {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mediatek,portmap = "llllw";
+};
+
+&gsw {
+ mediatek,port4 = "ephy";
+};
+
+&sdhci {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "ralink,mt7620a-v22sg-evb", "ralink,mt7620a-soc";
+ model = "Ralink MT7620a V22SG High Power evaluation board";
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ aoss {
+ label = "aoss";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ nand {
+ compatible = "mtk,mt7620-nand";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x40000 0x20000>;
+ read-only;
+ };
+
+ factory: partition@60000 {
+ label = "factory";
+ reg = <0x60000 0x20000>;
+ read-only;
+ };
+
+ partition@80000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x80000 0x7f80000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf", "spi";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+ mediatek,portmap = "llllw";
+
+ port@4 {
+ status = "okay";
+ phy-handle = <&phy4>;
+ phy-mode = "rgmii";
+ };
+
+ port@5 {
+ status = "okay";
+ phy-handle = <&phy5>;
+ phy-mode = "rgmii";
+ };
+
+ mdio-bus {
+ status = "okay";
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "rgmii";
+ };
+
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ phy-mode = "rgmii";
+ };
+ };
+};
+
+&gsw {
+ mediatek,port4 = "gmac";
+};
+
+&pcie {
+ status = "okay";
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
--- /dev/null
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2017 Kristian Evensen <kristian.evensen@gmail.com>.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "sanlinking,d240", "ralink,mt7620a-soc";
+ model = "Sanlinking Technologies D240";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ power_mpcie2 {
+ gpio-export,name = "power_mpcie2";
+ gpio-export,output = <1>;
+ gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ power_mpcie1 {
+ gpio-export,name = "power_mpcie1";
+ gpio-export,output = <1>;
+ gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "d240:blue:power";
+ gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb {
+ label = "d240:blue:usb";
+ gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ air {
+ label = "d240:blue:wifi";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ en25q128@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+ };
+};
+
+&sdhci {
+ status = "okay";
+ /* the pins function is already set during pinmux driver load */
+ /delete-property/ pinctrl-0;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "wllll";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "i2c", "uartf", "wled", "spi refclk", "pa";
+ ralink,function = "gpio";
+ };
+
+ /*
+ * The sd function of the nd_sd group configures two of the
+ * groups pins as gpios. The pins are used as PCIe reset/power.
+ * Due to the driver load order, the pins are configured way to
+ * late if triggered by the sd-card driver.
+ * To not introduce another kind of driver load order
+ * dependency and configure the pins as early as possible,
+ * means during pinmux driver load.
+ */
+ gpio_sd {
+ ralink,group = "nd_sd";
+ ralink,function = "sd";
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "sercomm,na930", "ralink,mt7620a-soc";
+ model = "Sercomm NA930";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ chosen {
+ bootargs = "console=ttyS1,57600";
+ };
+
+ nand {
+ compatible = "mtk,mt7620-nand";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x20000>;
+ read-only;
+ };
+
+ partition@200000 {
+ label = "factory";
+ reg = <0x200000 0x40000>;
+ read-only;
+ };
+
+ partition@240000 {
+ label = "Config";
+ reg = <0x240000 0x400000>;
+ read-only;
+ };
+
+ partition@640000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x640000 0x1400000>;
+ };
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ zwave {
+ label = "zwave";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ zwave {
+ label = "na930:blue:zwave";
+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+ };
+
+ status {
+ label = "na930:blue:status";
+ gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ service {
+ label = "na930:blue:service";
+ gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power: power {
+ label = "na930:blue:power";
+ gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ telit {
+ gpio-export,name = "telit";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "rgmii2", "spi", "ephy";
+ ralink,function = "gpio";
+ };
+
+ uartf_gpio {
+ ralink,group = "uartf";
+ ralink,function = "gpio uartf";
+ };
+ };
+};
+
+&uart {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+ðernet {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii1_pins &mdio_pins>;
+ mediatek,portmap = "llllw";
+
+ port@4 {
+ status = "okay";
+ phy-handle = <&phy4>;
+ phy-mode = "rgmii";
+ };
+
+ port@5 {
+ status = "okay";
+ phy-handle = <&phy5>;
+ phy-mode = "rgmii";
+ };
+
+ mdio-bus {
+ status = "okay";
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "rgmii";
+ };
+
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ phy-mode = "rgmii";
+ };
+ };
+};
+
+&gsw {
+ mediatek,port4 = "gmac";
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "tplink,archer-c2-v1", "ralink,mt7620a-soc";
+ model = "TP-Link Archer C2 v1";
+
+ aliases {
+ led-boot = &led_wps;
+ led-failsafe = &led_wps;
+ led-running = &led_wps;
+ led-upgrade = &led_wps;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf", "wled", "ephy", "spi refclk";
+ ralink,function = "gpio";
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ lan {
+ label = "c2-v1:green:lan";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ };
+
+ usb {
+ label = "c2-v1:green:usb";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ led_wps: wps {
+ label = "c2-v1:green:wps";
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "c2-v1:green:wan";
+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "c2-v1:green:wlan";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset_wps {
+ label = "reset_wps";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ rfkill {
+ label = "rfkill";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+ };
+
+ rtl8367rb {
+ compatible = "realtek,rtl8367b", "rtl8367b";
+ cpu_port = <6>;
+ realtek,extif1 = <1 0 1 1 1 1 1 1 2>;
+ mii-bus = <&mdio0>;
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x20000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x20000 0x7a0000>;
+ };
+
+ partition@7c0000 {
+ label = "config";
+ reg = <0x7c0000 0x10000>;
+ read-only;
+ };
+
+ rom: partition@7d0000 {
+ label = "rom";
+ reg = <0x7d0000 0x10000>;
+ read-only;
+ };
+
+ partition@7e0000 {
+ label = "romfile";
+ reg = <0x7e0000 0x10000>;
+ read-only;
+ };
+
+ radio: partition@7f0000 {
+ label = "radio";
+ reg = <0x7f0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ðernet {
+ status = "okay";
+ mtd-mac-address = <&rom 0xf100>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+
+ port@5 {
+ status = "okay";
+ mediatek,fixed-link = <1000 1 1 1>;
+ phy-mode = "rgmii";
+ };
+
+ mdio0: mdio-bus {
+ status = "okay";
+ };
+};
+
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&radio 0>;
+ mtd-mac-address = <&rom 0xf100>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&radio 0x8000>;
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ compatible = "tplink,archer-c20-v1", "ralink,mt7620a-soc";
+ model = "TP-Link Archer C20 v1";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ lan {
+ label = "c20-v1:blue:lan";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power: power {
+ label = "c20-v1:blue:power";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+
+ usb {
+ label = "c20-v1:blue:usb";
+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ wan {
+ label = "c20-v1:blue:wan";
+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan_orange {
+ label = "c20-v1:orange:wan";
+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan5g {
+ label = "c20-v1:blue:wlan5g";
+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan2g {
+ label = "c20-v1:blue:wlan2g";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "c20-v1:blue:wps";
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ rfkill {
+ label = "rfkill";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x20000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x20000 0x7a0000>;
+ };
+
+ partition@7c0000 {
+ label = "config";
+ reg = <0x7c0000 0x10000>;
+ read-only;
+ };
+
+ rom: partition@7d0000 {
+ label = "rom";
+ reg = <0x7d0000 0x10000>;
+ read-only;
+ };
+
+ partition@7e0000 {
+ label = "romfile";
+ reg = <0x7e0000 0x10000>;
+ read-only;
+ };
+
+ radio: partition@7f0000 {
+ label = "radio";
+ reg = <0x7f0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf", "wled", "ephy", "spi refclk", "wdt";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ pinctrl-names = "default";
+ mtd-mac-address = <&rom 0xf100>;
+ mediatek,portmap = "wllll";
+ };
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&gsw {
+ mediatek,port4 = "ephy";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&radio 0>;
+ mtd-mac-address = <&rom 0xf100>;
+ mtd-mac-address-increment = <(-2)>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pa_pins>;
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&radio 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ mtd-mac-address = <&rom 0xf100>;
+ mtd-mac-address-increment = <(-1)>;
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "tplink,archer-c20i", "ralink,mt7620a-soc";
+ model = "TP-Link Archer C20i";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ lan {
+ label = "c20i:blue:lan";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ };
+ usb {
+ label = "c20i:blue:usb";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
+ };
+ wps {
+ label = "c20i:blue:wps";
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ };
+ wan {
+ label = "c20i:blue:wan";
+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+ };
+ wlan {
+ label = "c20i:blue:wlan";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ rfkill {
+ label = "rfkill";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+ reset_wps {
+ label = "reset_wps";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x20000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x20000 0x7a0000>;
+ };
+
+ partition@7c0000 {
+ label = "config";
+ reg = <0x7c0000 0x10000>;
+ };
+
+ rom: partition@7d0000 {
+ label = "rom";
+ reg = <0x7d0000 0x10000>;
+ };
+
+ partition@7e0000 {
+ label = "romfile";
+ reg = <0x7e0000 0x10000>;
+ };
+
+ radio: partition@7f0000 {
+ label = "radio";
+ reg = <0x7f0000 0x10000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd", "ephy", "spi refclk";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ pinctrl-names = "default";
+ mtd-mac-address = <&rom 0xf100>;
+ mediatek,portmap = "wllll";
+ };
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&gsw {
+ mediatek,port4 = "ephy";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&radio 0>;
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&radio 32768>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ compatible = "tplink,archer-c50-v1", "ralink,mt7620a-soc";
+ model = "TP-Link Archer C50 v1";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ lan {
+ label = "c50:green:lan";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power: power {
+ label = "c50:green:power";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ usb {
+ label = "c50:green:usb";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ wan {
+ label = "c50:green:wan";
+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_orange {
+ label = "c50:orange:wan";
+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan5g {
+ label = "c50:green:wlan5g";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan2g {
+ label = "c50:green:wlan2g";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "c50:green:wps";
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ rfkill {
+ label = "rfkill";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ }; };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x20000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x20000 0x7a0000>;
+ };
+
+ partition@7c0000 {
+ label = "config";
+ reg = <0x7c0000 0x10000>;
+ read-only;
+ };
+
+ rom: partition@7d0000 {
+ label = "rom";
+ reg = <0x7d0000 0x10000>;
+ read-only;
+ };
+
+ partition@7e0000 {
+ label = "romfile";
+ reg = <0x7e0000 0x10000>;
+ read-only;
+ };
+
+ radio: partition@7f0000 {
+ label = "radio";
+ reg = <0x7f0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "ephy", "spi refclk", "mdio", "wdt", "nd_sd";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ pinctrl-names = "default";
+ mtd-mac-address = <&rom 0xf100>;
+ mediatek,portmap = "wllll";
+ };
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&gsw {
+ mediatek,port4 = "ephy";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&radio 0>;
+ mtd-mac-address = <&rom 0xf100>;
+ mtd-mac-address-increment = <(-2)>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pa_pins>;
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&radio 32768>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ mtd-mac-address = <&rom 0xf100>;
+ mtd-mac-address-increment = <(-1)>;
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "tplink,archer-mr200", "ralink,mt7620a-soc";
+ model = "TP-Link Archer MR200";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ lan {
+ label = "mr200:white:lan";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "mr200:white:wan";
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power: power {
+ label = "mr200:white:power";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ };
+
+ 4g {
+ label = "mr200:white:4g";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "mr200:white:wps";
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ };
+
+ signal1 {
+ label = "mr200:white:signal1";
+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ };
+
+ signal2 {
+ label = "mr200:white:signal2";
+ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+ };
+
+ signal3 {
+ label = "mr200:white:signal3";
+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+ };
+
+ signal4 {
+ label = "mr200:white:signal4";
+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "mr200:white:wlan";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ rfkill {
+ label = "rfkill";
+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_RFKILL>;
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ power_usb {
+ gpio-export,name = "power_usb1";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x20000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x20000 0x7b0000>;
+ };
+
+ rom: partition@7d0000 {
+ label = "rom";
+ reg = <0x7d0000 0x10000>;
+ read-only;
+ };
+
+ partition@7e0000 {
+ label = "romfile";
+ reg = <0x7e0000 0x10000>;
+ read-only;
+ };
+
+ radio: partition@7f0000 {
+ label = "radio";
+ reg = <0x7f0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd", "ephy", "spi refclk";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&rom 0xf100>;
+ mediatek,portmap = "llll";
+ };
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&gsw {
+ mediatek,port4 = "ephy";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&radio 0>;
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&radio 32768>;
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "xiaomi,miwifi-mini", "ralink,mt7620a-soc";
+ model = "Xiaomi MiWiFi Mini";
+
+ aliases {
+ led-boot = &led_blue;
+ led-failsafe = &led_blue;
+ led-running = &led_blue;
+ led-upgrade = &led_blue;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_blue: blue {
+ label = "miwifi-mini:blue:status";
+ gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ yellow {
+ label = "miwifi-mini:yellow:status";
+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ };
+
+ red {
+ label = "miwifi-mini:red:status";
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xf80000>;
+ };
+
+ partition@fd0000 {
+ label = "crash";
+ reg = <0xfd0000 0x10000>;
+ };
+
+ partition@fe0000 {
+ label = "reserved";
+ reg = <0xfe0000 0x10000>;
+ read-only;
+ };
+
+ partition@ff0000 {
+ label = "Bdata";
+ reg = <0xff0000 0x10000>;
+ };
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+ðernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mtd-mac-address = <&factory 0x28>;
+ mediatek,portmap = "llllw";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pa_pins>;
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "rgmii1";
+ ralink,function = "gpio";
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "youku,yk1", "ralink,mt7620a-soc";
+ model = "YOUKU YK1";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ wan {
+ label = "youku-yk1:blue:wan";
+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+ };
+ air {
+ label = "youku-yk1:blue:air";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+ usb {
+ label = "youku-yk1:blue:usb";
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
+ };
+ led_power: power {
+ label = "youku-yk1:blue:power";
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "mx25l25635f", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x1fb0000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "i2c", "rgmii1", "ephy", "wled";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ pinctrl-names = "default";
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "llllw";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&sdhci {
+ status = "okay";
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "yukai,bocco", "ralink,mt7620a-soc";
+ model = "YUKAI Engineering BOCCO";
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ s1 {
+ gpio-export,name = "rec";
+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+ };
+ s2 {
+ gpio-export,name = "play";
+ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "Audio-I2S";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&dailink0_master>;
+ simple-audio-card,frame-master = <&dailink0_master>;
+ simple-audio-card,widgets =
+ "Headphone", "Headphones";
+ simple-audio-card,routing =
+ "Headphones", "HP_L",
+ "Headphones", "HP_R";
+ simple-audio-card,mclk-fs = <256>;
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s>;
+ };
+
+ dailink0_master: simple-audio-card,codec {
+ sound-dai = <&codec>;
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&i2c {
+ status = "okay";
+
+ codec: wm8960@1a {
+ #sound-dai-cells = <0>;
+ compatible = "wlf,wm8960";
+ reg = <0x1a>;
+
+ wlf,shared-lrclk;
+ };
+};
+
+&i2s {
+ #sound-dai-cells = <0>;
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcm_i2s_pins>;
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+&pcm {
+ status = "okay";
+};
+
+&gdma {
+ status = "okay";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi refclk", "rgmii1";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "llllw";
+};
+
+&gsw {
+ ralink,port4 = "ephy";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
--- /dev/null
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2017 Kristian Evensen <kristian.evensen@gmail.com>.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "mt7620a_zbtlink_we1026-5g.dtsi"
+
+/ {
+ compatible = "zbtlink,we1026-5g-16m", "ralink,mt7620a-soc";
+ model = "ZBT WE1026-5G (16M)";
+};
+
+&spi0 {
+ status = "okay";
+
+ en25q128@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ firmware: partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+ };
+};
--- /dev/null
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2017 Kristian Evensen <kristian.evensen@gmail.com>.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "zbtlink,we1026-5g", "ralink,mt7620a-soc";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ lan {
+ label = "we1026-5g:green:lan";
+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+ };
+
+ usb {
+ label = "we1026-5g:green:usb";
+ gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ wifi {
+ label = "we1026-5g:green:wifi";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&sdhci {
+ status = "okay";
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "i2c", "uartf", "spi refclk", "ephy", "wled";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi@0,0 {
+ compatible = "pci14c3,7662";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "zbtlink,zbt-ape522ii", "ralink,mt7620a-soc";
+ model = "ZBT-APE522II";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ sys1 {
+ label = "zbt-ape522ii:green:sys1";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+
+ sys2 {
+ label = "zbt-ape522ii:green:sys2";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ };
+
+ sys3 {
+ label = "zbt-ape522ii:green:sys3";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ sys4 {
+ label = "zbt-ape522ii:green:sys4";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan2g4 {
+ label = "zbt-ape522ii:green:wlan2g4";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xf80000>;
+ };
+ };
+ };
+};
+
+ðernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "wllll";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pa_pins>;
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "wled", "i2c", "uartf", "wdt";
+ ralink,function = "gpio";
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a_zbtlink_zbt-we826.dtsi"
+
+/ {
+ compatible = "zbtlink,zbt-we826-16m", "zbtlink,zbt-we826", "ralink,mt7620a-soc";
+ model = "ZBT-WE826 (16M)";
+};
+
+&spi0 {
+ status = "okay";
+
+ en25q128@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ firmware: partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a_zbtlink_zbt-we826.dtsi"
+
+/ {
+ compatible = "zbtlink,zbt-we826-32m", "zbtlink,zbt-we826", "ralink,mt7620a-soc";
+ model = "ZBT-WE826 (32M)";
+};
+
+&spi0 {
+ status = "okay";
+
+ en25q128@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ firmware: partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x1fb0000>;
+ };
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7620a_zbtlink_zbt-we826.dtsi"
+
+/ {
+ compatible = "zbtlink,zbt-we826-e", "zbtlink,zbt-we826", "ralink,mt7620a-soc";
+ model = "ZBT-WE826-E";
+
+ /delete-node/ leds;
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: gsm {
+ label = "zbt-we826-e:blue:gsm";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ signal {
+ label = "zbt-we826-e:green:signal";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+
+ sim {
+ label = "zbt-we826-e:red:sim";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ };
+
+ air {
+ label = "zbt-we826-e:red:wifi";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ firmware: partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x1fb0000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "i2c", "uartf", "wled";
+ ralink,function = "gpio";
+ };
+ };
+};
--- /dev/null
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "zbtlink,zbt-we826", "ralink,mt7620a-soc";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led_power: power {
+ label = "zbt-we826:green:power";
+ gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+ };
+ usb {
+ label = "zbt-we826:green:usb";
+ gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
+ };
+ air {
+ label = "zbt-we826:green:wifi";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&sdhci {
+ status = "okay";
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "wllll";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "i2c", "uartf", "wled", "spi refclk", "pa";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "zte,q7", "ralink,mt7620a-soc";
+ model = "ZTE Q7";
+
+ aliases {
+ led-boot = &led_status_blue;
+ led-failsafe = &led_status_blue;
+ led-running = &led_status_blue;
+ led-upgrade = &led_status_blue;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ statred {
+ label = "zte-q7:red:status";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+
+ led_status_blue: statblue {
+ label = "zte-q7:blue:status";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "wllll";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&sdhci {
+ status = "okay";
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&gsw {
+ mediatek,port4 = "ephy";
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "zyxel,keenetic-viva", "ralink,mt7620a-soc";
+ model = "ZyXEL Keenetic Viva";
+
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_green;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_green;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wan {
+ label = "kng_rc:green:wan";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ };
+
+ usb {
+ label = "kng_rc:green:usb";
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ power_alert {
+ label = "kng_rc:red:power";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi {
+ label = "kng_rc:green:wifi";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_green: power {
+ label = "kng_rc:green:power";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ fn {
+ label = "fn";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ usb_power {
+ gpio-export,name = "usb";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ rtl8367rb {
+ compatible = "realtek,rtl8367b";
+ cpu_port = <7>;
+ realtek,extif2 = <1 0 1 1 1 1 1 1 2>;
+ mii-bus = <&mdio0>;
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii2_pins &mdio_pins>;
+ mtd-mac-address = <&factory 0x00004>;
+
+ port@4 {
+ status = "okay";
+ mediatek,fixed-link = <1000 1 1 1>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy4>;
+ };
+
+ mdio0: mdio-bus {
+ status = "okay";
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "rgmii";
+ };
+ };
+};
+
+&gsw {
+ mediatek,port4 = "gmac";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620n.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "asus,rt-n12p", "ralink,mt7620n-soc";
+ model = "Asus RT-N12+";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wan {
+ label = "rt-n12p:green:wan";
+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "rt-n12p:green:lan";
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power: power {
+ label = "rt-n12p:green:power";
+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+ };
+
+ air {
+ label = "rt-n12p:green:air";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "wllll";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "ephy", "wled", "i2c", "wdt", "pa", "spi refclk";
+ ralink,function = "gpio";
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620n.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "asus,rt-n14u", "ralink,mt7620n-soc";
+ model = "Asus RT-N14U";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wan {
+ label = "rt-n14u:blue:wan";
+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "rt-n14u:blue:lan";
+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ };
+
+ usb {
+ label = "rt-n14u:blue:usb";
+ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ led_power: power {
+ label = "rt-n14u:blue:power";
+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+ };
+
+ air {
+ label = "rt-n14u:blue:air";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "wllll";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "ephy", "wled", "i2c";
+ ralink,function = "gpio";
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620n.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "buffalo,wmr-300", "ralink,mt7620n-soc";
+ model = "Buffalo WMR-300";
+
+ aliases {
+ led-boot = &led_status;
+ led-failsafe = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_status;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ aoss1 {
+ label = "wmr-300:red:aoss";
+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ };
+
+ aoss2 {
+ label = "wmr-300:green:aoss";
+ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+ };
+
+ led_status: status {
+ label = "wmr-300:green:status";
+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ aoss {
+ label = "aoss";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "wllll";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "i2c", "ephy";
+ ralink,function = "gpio";
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620n.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "comfast,cf-wr800n", "ralink,mt7620n-soc";
+ model = "Comfast CF-WR800N";
+
+ aliases {
+ led-boot = &led_wps;
+ led-failsafe = &led_wps;
+ led-running = &led_wps;
+ led-upgrade = &led_wps;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ ethernet {
+ label = "cf-wr800n:white:ethernet";
+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi {
+ label = "cf-wr800n:white:wifi";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+
+ led_wps: wps {
+ label = "cf-wr800n:white:wps";
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "ephy", "wled", "spi refclk", "i2c";
+ ralink,function = "gpio";
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620n.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "dlink,dwr-116-a1", "ralink,mt7620n-soc";
+ model = "D-Link DWR-116 A1/A2";
+
+ aliases {
+ led-boot = &led_status;
+ led-failsafe = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_status;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status: status {
+ label = "dwr-116-a1:green:status";
+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ wifi {
+ label = "dwr-116-a1:green:wifi";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "jboot";
+ reg = <0x0 0x10000>;
+ read-only;
+ };
+
+ partition@10000 {
+ compatible = "amit,jimage";
+ label = "firmware";
+ reg = <0x10000 0x7e0000>;
+ };
+
+ config: partition@7f0000 {
+ label = "config";
+ reg = <0x7f0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "i2c", "wled";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mediatek,portmap = "llllw";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620n.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "dlink,dwr-921-c1", "ralink,mt7620n-soc";
+ model = "D-Link DWR-921 C1";
+
+ aliases {
+ led-boot = &led_sstrenghg;
+ led-failsafe = &led_sstrenghg;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ sms {
+ label = "dwr-921-c1:green:sms";
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "dwr-921-c1:green:lan";
+ gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_sstrenghg: sstrengthg {
+ label = "dwr-921-c1:green:sigstrength";
+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+ };
+
+ sstrengthr {
+ label = "dwr-921-c1:red:sigstrength";
+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ };
+
+ 4g {
+ label = "dwr-921-c1:green:4g";
+ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+ };
+
+ 3g {
+ label = "dwr-921-c1:green:3g";
+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi {
+ label = "dwr-921-c1:green:wifi";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ lte_modem_enable {
+ gpio-export,name = "lte_modem_enable";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "jboot";
+ reg = <0x0 0x10000>;
+ read-only;
+ };
+
+ partition@10000 {
+ compatible = "amit,jimage";
+ label = "firmware";
+ reg = <0x10000 0xfe0000>;
+ };
+
+ config: partition@ff0000 {
+ label = "config";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+ðernet {
+ port@4 {
+ status = "okay";
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "spi refclk", "i2c", "ephy", "wled";
+ ralink,function = "gpio";
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7620n.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "dlink,dwr-922-e2", "ralink,mt7620n-soc";
+ model = "D-Link DWR-922 E2";
+
+ aliases {
+ led-boot = &sstrengthg;
+ led-failsafe = &sstrengthg;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led-boot = &sstrengthg;
+
+ sms {
+ label = "dwr-922-e2:green:sms";
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "dwr-922-e2:green:lan";
+ gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+ };
+
+ sstrengthg: sstrengthg {
+ label = "dwr-922-e2:green:sigstrength";
+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+ };
+
+ sstrengthr {
+ label = "dwr-922-e2:red:sigstrength";
+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ };
+
+ 4g {
+ label = "dwr-922-e2:green:4g";
+ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+ };
+
+ 3g {
+ label = "dwr-922-e2:green:3g";
+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi {
+ label = "dwr-922-e2:green:wifi";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ lte_modem_enable {
+ gpio-export,name = "lte_modem_enable";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "jboot";
+ reg = <0x0 0x10000>;
+ read-only;
+ };
+
+ partition@10000 {
+ compatible = "amit,jimage";
+ label = "firmware";
+ reg = <0x10000 0xfe0000>;
+ };
+
+ config: partition@ff0000 {
+ label = "config";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+ðernet {
+ port@4 {
+ status = "okay";
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "spi refclk", "i2c", "ephy", "wled";
+ ralink,function = "gpio";
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620n.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "elecom,wrh-300cr", "ralink,mt7620n-soc";
+ model = "ELECOM WRH-300CR";
+
+ aliases {
+ led-boot = &led_wps;
+ led-failsafe = &led_wps;
+ led-running = &led_wps;
+ led-upgrade = &led_wps;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_wps: wps {
+ label = "wrh-300cr:green:wps";
+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+ };
+
+ ethernet {
+ label = "wrh-300cr:green:ethernet";
+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "wrh-300cr:green:wlan";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "recover";
+ reg = <0x50000 0x1c0000>;
+ read-only;
+ };
+
+ partition@210000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x210000 0xdf0000>;
+ };
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x2e>;
+ mediatek,portmap = "llllw";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "i2c", "ephy", "wled";
+ ralink,function = "gpio";
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620n.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "kimax,u35wf","ralink,mt7620n-soc";
+ model = "Kimax U35WF";
+
+ aliases {
+ led-boot = &led_wifi;
+ led-failsafe = &led_wifi;
+ led-running = &led_wifi;
+ led-upgrade = &led_wifi;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_wifi: wifi {
+ label = "u35wf:blue:wifi";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "u35wf:green:eth";
+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "ephy", "wled";
+ ralink,function = "gpio";
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620n.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "kingston,mlw221", "ralink,mt7620n-soc";
+ model = "Kingston MLW221";
+
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "mlw221:blue:system";
+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi {
+ label = "mlw221:blue:wifi";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ system {
+ label = "system";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xf60000>;
+ };
+
+ partition@fb0000 {
+ label = "user-config";
+ reg = <0xfb0000 0x50000>;
+ };
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "wllll";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "i2c", "ephy", "wled";
+ ralink,function = "gpio";
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620n.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "kingston,mlwg2", "ralink,mt7620n-soc";
+ model = "Kingston MLWG2";
+
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "mlwg2:blue:system";
+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi {
+ label = "mlwg2:blue:wifi";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ system {
+ label = "system";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xf60000>;
+ };
+
+ partition@fb0000 {
+ label = "user-config";
+ reg = <0xfb0000 0x50000>;
+ };
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "wllll";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "i2c", "ephy", "wled";
+ ralink,function = "gpio";
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620n_nexx_wt3020.dtsi"
+
+/ {
+ compatible = "nexx,wt3020-4m", "nexx,wt3020", "ralink,mt7620n-soc";
+ model = "Nexx WT3020 (4M)";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620n_nexx_wt3020.dtsi"
+
+/ {
+ compatible = "nexx,wt3020-8m", "nexx,wt3020", "ralink,mt7620n-soc";
+ model = "Nexx WT3020 (8M)";
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
--- /dev/null
+#include "mt7620n.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "nexx,wt3020", "ralink,mt7620n-soc";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "wt3020:blue:power";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "wllll";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620n.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "ravpower,wd03", "ralink,mt7620n-soc";
+ model = "Ravpower WD03";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ green-wifi {
+ label = "wd03:green:wifi";
+ gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+ };
+
+
+ blue-wifi {
+ label = "wd03:blue:wifi";
+ gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&i2c {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4000>;
+ ralink,port-map = "wllll";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "wled", "ephy";
+ ralink,function = "gpio";
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620n.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "vonets,var11n-300", "ralink,mt7620n-soc";
+ model = "Vonets VAR11N-300";
+
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "var11n-300:blue:system";
+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "llllw";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "i2c";
+ ralink,function = "gpio";
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620n.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ compatible = "wrtnode,wrtnode", "ralink,mt7620n-soc";
+ model = "WRTNODE";
+
+ aliases {
+ led-boot = &led_indicator;
+ led-failsafe = &led_indicator;
+ led-running = &led_indicator;
+ led-upgrade = &led_indicator;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_indicator: indicator {
+ label = "wrtnode:blue:indicator";
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "wllll";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf", "spi refclk";
+ ralink,function = "gpio";
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620n.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "zbtlink,zbt-cpe102", "ralink,mt7620n-soc";
+ model = "Zbtlink ZBT-CPE102";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+
+ aliases {
+ led-boot = &led_4g_0;
+ led-failsafe = &led_4g_0;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_4g_0: 4g-0 {
+ label = "zbt-cpe102:green:4g-0";
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ };
+
+ 4g-1 {
+ label = "zbt-cpe102:green:4g-1";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ };
+
+ 4g-2 {
+ label = "zbt-cpe102:green:4g-2";
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ en25q64@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x760000>;
+ };
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "wllll";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "i2c", "spi refclk", "wled";
+ ralink,function = "gpio";
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620n.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "zbtlink,zbt-wa05", "ralink,mt7620n-soc";
+ model = "Zbtlink ZBT-WA05";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "zbt-wa05:blue:power";
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ };
+
+ usb {
+ label = "zbt-wa05:blue:usb";
+ gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ air {
+ label = "zbt-wa05:blue:air";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ en25q64@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x760000>;
+ };
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "wllll";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "i2c", "spi refclk", "wled";
+ ralink,function = "gpio";
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "mt7620n.dtsi"
+
+/ {
+ compatible = "zbtlink,zbt-we2026", "ralink,mt7620n-soc";
+ model = "Zbtlink ZBT-WE2026";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "zbt-we2026:red:power";
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "zbt-we2026:green:wlan";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ en25q64@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x760000>;
+ };
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "wllll";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "i2c", "spi refclk", "wled";
+ ralink,function = "gpio";
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620n.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "zbtlink,zbt-wr8305rt", "ralink,mt7620n-soc";
+ model = "Zbtlink ZBT-WR8305RT";
+
+ aliases {
+ led-boot = &led_sys;
+ led-failsafe = &led_sys;
+ led-running = &led_sys;
+ led-upgrade = &led_sys;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_sys: sys {
+ label = "zbt-wr8305rt:green:sys";
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "zbt-wr8305rt:green:usb";
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ wifi {
+ label = "zbt-wr8305rt:green:wifi";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+ðernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "llllw";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "i2c", "uartf", "spi refclk", "wled";
+ ralink,function = "gpio";
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620n.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "zyxel,keenetic-omni-ii", "ralink,mt7620n-soc";
+ model = "ZyXEL Keenetic Omni II";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wan {
+ label = "kn_rc:green:wan";
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ };
+
+ usb {
+ label = "kn_rc:green:usb";
+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ wifi {
+ label = "kn_rc:green:wifi";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power: power {
+ label = "kn_rc:green:power";
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ fn {
+ label = "fn";
+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ usb_power {
+ gpio-export,name = "usb";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "wdt", "pa", "spi refclk", "wled";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "wllll";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7620n.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "zyxel,keenetic-omni", "ralink,mt7620n-soc";
+ model = "ZyXEL Keenetic Omni";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wan {
+ label = "kn_rc:green:wan";
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ };
+
+ usb {
+ label = "kn_rc:green:usb";
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ wifi {
+ label = "kn_rc:green:wifi";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power: power {
+ label = "kn_rc:green:power";
+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ fn {
+ label = "fn";
+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ usb_power {
+ gpio-export,name = "usb";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "wdt", "pa", "spi refclk", "wled";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "llllw";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
endef
define Device/aigale_ai-br100
- DTS := AI-BR100
+ MTK_SOC := mt7620a
IMAGE_SIZE := 7936k
DEVICE_VENDOR := Aigale
DEVICE_MODEL := Ai-BR100
TARGET_DEVICES += aigale_ai-br100
define Device/alfa-network_ac1200rm
- DTS := AC1200RM
+ MTK_SOC := mt7620a
IMAGE_SIZE := 16064k
DEVICE_VENDOR := ALFA Network
DEVICE_MODEL := AC1200RM
TARGET_DEVICES += alfa-network_ac1200rm
define Device/alfa-network_tube-e4g
- DTS := TUBE-E4G
+ MTK_SOC := mt7620a
IMAGE_SIZE := 16064k
DEVICE_VENDOR := ALFA Network
DEVICE_MODEL := Tube-E4G
endef
define Device/Archer
+ MTK_SOC := mt7620a
DEVICE_VENDOR := TP-Link
TPLINK_HWREVADD := 0
TPLINK_HVERSION := 3
define Device/tplink_archer-c20i
$(Device/Archer)
- DTS := ArcherC20i
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0xc2000001
TPLINK_HWREV := 58
define Device/tplink_archer-c50-v1
$(Device/Archer)
- DTS := ArcherC50
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0xc7500001
TPLINK_HWREV := 69
define Device/tplink_archer-mr200
$(Device/Archer)
- DTS := ArcherMR200
TPLINK_FLASHLAYOUT := 8MLmtk
TPLINK_HWID := 0xd7500001
TPLINK_HWREV := 0x4a
TARGET_DEVICES += tplink_archer-mr200
define Device/bdcom_wap2100-sk
- DTS := BDCOM-WAP2100-SK
+ MTK_SOC := mt7620a
IMAGE_SIZE := 15808k
DEVICE_VENDOR := BDCOM
DEVICE_MODEL := WAP2100-SK (ZTE ZXECS EBG3130)
TARGET_DEVICES += bdcom_wap2100-sk
define Device/yukai_bocco
- DTS := BOCCO
+ MTK_SOC := mt7620a
DEVICE_VENDOR := YUKAI Engineering
DEVICE_MODEL := BOCCO
DEVICE_PACKAGES := kmod-sound-core kmod-sound-mt7620 kmod-i2c-ralink
TARGET_DEVICES += yukai_bocco
define Device/hnet_c108
- DTS := C108
+ MTK_SOC := mt7620a
IMAGE_SIZE := 16777216
DEVICE_VENDOR := HNET
DEVICE_MODEL := C108
TARGET_DEVICES += hnet_c108
define Device/comfast_cf-wr800n
- DTS := CF-WR800N
+ MTK_SOC := mt7620n
DEVICE_VENDOR := Comfast
DEVICE_MODEL := CF-WR800N
SUPPORTED_DEVICES += cf-wr800n
TARGET_DEVICES += comfast_cf-wr800n
define Device/planex_cs-qr10
- DTS := CS-QR10
+ MTK_SOC := mt7620a
DEVICE_VENDOR := Planex
DEVICE_MODEL := CS-QR10
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci \
TARGET_DEVICES += planex_cs-qr10
define Device/sanlinking_d240
- DTS := D240
+ MTK_SOC := mt7620a
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_VENDOR := Sanlinking Technologies
DEVICE_MODEL := D240
TARGET_DEVICES += sanlinking_d240
define Device/planex_db-wrt01
- DTS := DB-WRT01
+ MTK_SOC := mt7620a
DEVICE_VENDOR := Planex
DEVICE_MODEL := DB-WRT01
SUPPORTED_DEVICES += db-wrt01
define Device/dlink_dch-m225
$(Device/seama)
- DTS := DCH-M225
+ MTK_SOC := mt7620a
BLOCKSIZE := 4k
SEAMA_SIGNATURE := wapn22_dlink.2013gui_dap1320b
IMAGE_SIZE := 6848k
TARGET_DEVICES += dlink_dch-m225
define Device/dlink_dir-810l
- DTS := DIR-810L
+ MTK_SOC := mt7620a
DEVICE_PACKAGES := kmod-mt76x0e
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DIR-810L
define Device/dlink_dir-510l
$(Device/amit_jboot)
- DTS := DIR-510L
+ MTK_SOC := mt7620a
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DIR-510L
DEVICE_PACKAGES += kmod-mt76x0e
define Device/dlink_dwr-116-a1
$(Device/amit_jboot)
- DTS := DWR-116-A1
+ MTK_SOC := mt7620n
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DWR-116
DEVICE_VARIANT := A1/A2
define Device/dlink_dwr-118-a1
$(Device/amit_jboot)
- DTS := DWR-118-A1
+ MTK_SOC := mt7620a
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DWR-118
DEVICE_VARIANT := A1
define Device/dlink_dwr-118-a2
$(Device/amit_jboot)
- DTS := DWR-118-A2
+ MTK_SOC := mt7620a
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DWR-118
DEVICE_VARIANT := A2
define Device/dlink_dwr-921-c1
$(Device/amit_jboot)
- DTS := DWR-921-C1
+ MTK_SOC := mt7620n
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DWR-921
define Device/dlink_dwr-921-c3
$(Device/dlink_dwr-921-c1)
+ DEVICE_DTS := mt7620n_dlink_dwr-921-c1
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DWR-921
DEVICE_VARIANT := C3
define Device/dlink_dwr-922-e2
$(Device/amit_jboot)
- DTS := DWR-922-E2
+ MTK_SOC := mt7620n
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DWR-922
TARGET_DEVICES += dlink_dwr-922-e2
define Device/linksys_e1700
- DTS := E1700
+ MTK_SOC := mt7620a
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
umedia-header 0x013326
TARGET_DEVICES += linksys_e1700
define Device/netgear_ex2700
+ MTK_SOC := mt7620a
NETGEAR_HW_ID := 29764623+4+0+32+2x2+0
NETGEAR_BOARD_ID := EX2700
- DTS := EX2700
BLOCKSIZE := 4k
IMAGE_SIZE := $(ralink_default_fw_size_4M)
IMAGES += factory.bin
TARGET_DEVICES += netgear_ex2700
define Device/netgear_ex3700
+ MTK_SOC := mt7620a
NETGEAR_BOARD_ID := U12H319T00_NETGEAR
- DTS := EX3700
BLOCKSIZE := 4k
IMAGE_SIZE := 7744k
IMAGES += factory.chk
TARGET_DEVICES += netgear_ex3700
define Device/glinet_gl-mt300a
- DTS := GL-MT300A
+ MTK_SOC := mt7620a
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_VENDOR := GL.iNet
DEVICE_MODEL := GL-MT300A
TARGET_DEVICES += glinet_gl-mt300a
define Device/kimax_u25awf-h1
- DTS := U25AWF-H1
+ MTK_SOC := mt7620a
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Kimax
DEVICE_MODEL := U25AWF
TARGET_DEVICES += kimax_u25awf-h1
define Device/glinet_gl-mt300n
- DTS := GL-MT300N
+ MTK_SOC := mt7620a
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_VENDOR := GL.iNet
DEVICE_MODEL := GL-MT300N
TARGET_DEVICES += glinet_gl-mt300n
define Device/glinet_gl-mt750
- DTS := GL-MT750
+ MTK_SOC := mt7620a
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_VENDOR := GL.iNet
DEVICE_MODEL := GL-MT750
TARGET_DEVICES += glinet_gl-mt750
define Device/hiwifi_hc5661
- DTS := HC5661
+ MTK_SOC := mt7620a
IMAGE_SIZE := 15872k
DEVICE_VENDOR := HiWiFi
DEVICE_MODEL := HC5661
TARGET_DEVICES += hiwifi_hc5661
define Device/hiwifi_hc5761
- DTS := HC5761
+ MTK_SOC := mt7620a
IMAGE_SIZE := 15872k
DEVICE_VENDOR := HiWiFi
DEVICE_MODEL := HC5761
TARGET_DEVICES += hiwifi_hc5761
define Device/hiwifi_hc5861
- DTS := HC5861
+ MTK_SOC := mt7620a
IMAGE_SIZE := 15872k
DEVICE_VENDOR := HiWiFi
DEVICE_MODEL := HC5861
TARGET_DEVICES += hiwifi_hc5861
define Device/head-weblink_hdrm200
- DTS := HDRM200
+ MTK_SOC := mt7620a
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Head Weblink
DEVICE_MODEL := HDRM2000
TARGET_DEVICES += head-weblink_hdrm200
define Device/iodata_wn-ac1167gr
- DTS := WN-AC1167GR
+ MTK_SOC := mt7620a
DEVICE_VENDOR := I-O DATA
DEVICE_MODEL := WN-AC1167GR
IMAGE_SIZE := 6864k
TARGET_DEVICES += iodata_wn-ac1167gr
define Device/iodata_wn-ac733gr3
- DTS := WN-AC733GR3
+ MTK_SOC := mt7620a
DEVICE_VENDOR := I-O DATA
DEVICE_MODEL := WN-AC733GR3
IMAGE_SIZE := 6992k
TARGET_DEVICES += iodata_wn-ac733gr3
define Device/kimax_u35wf
- DTS := U35WF
+ MTK_SOC := mt7620n
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Kimax
DEVICE_MODEL := U35WF
TARGET_DEVICES += kimax_u35wf
define Device/zyxel_keenetic-viva
- DTS := kng_rc
+ MTK_SOC := mt7620a
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_VENDOR := ZyXEL
DEVICE_MODEL := Keenetic Viva
TARGET_DEVICES += zyxel_keenetic-viva
define Device/zyxel_keenetic-omni
- DTS := kn_rc
+ MTK_SOC := mt7620n
DEVICE_VENDOR := ZyXEL
DEVICE_MODEL := Keenetic Omni
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
TARGET_DEVICES += zyxel_keenetic-omni
define Device/zyxel_keenetic-omni-ii
- DTS := kn_rf
+ MTK_SOC := mt7620n
DEVICE_VENDOR := ZyXEL
DEVICE_MODEL := Keenetic Omni II
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
TARGET_DEVICES += zyxel_keenetic-omni-ii
define Device/microduino_microwrt
- DTS := MicroWRT
+ MTK_SOC := mt7620a
IMAGE_SIZE := 16128k
DEVICE_VENDOR := Microduino
DEVICE_MODEL := MicroWRT
define Device/lava_lr-25g001
$(Device/amit_jboot)
- DTS := LR-25G001
+ MTK_SOC := mt7620a
DEVICE_VENDOR := LAVA
DEVICE_MODEL := LR-25G001
DLINK_ROM_ID := LVA6E3804001
TARGET_DEVICES += lava_lr-25g001
define Device/xiaomi_miwifi-mini
- DTS := MIWIFI-MINI
+ MTK_SOC := mt7620a
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := MiWiFi Mini
TARGET_DEVICES += xiaomi_miwifi-mini
define Device/kingston_mlw221
- DTS := MLW221
+ MTK_SOC := mt7620n
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_VENDOR := Kingston
DEVICE_MODEL := MLW221
TARGET_DEVICES += kingston_mlw221
define Device/kingston_mlwg2
- DTS := MLWG2
+ MTK_SOC := mt7620n
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_VENDOR := Kingston
DEVICE_MODEL := MLWG2
TARGET_DEVICES += kingston_mlwg2
define Device/ralink_mt7620a-evb
- DTS := MT7620a
+ MTK_SOC := mt7620a
DEVICE_VENDOR := MediaTek
DEVICE_MODEL := MT7620a EVB
endef
TARGET_DEVICES += ralink_mt7620a-evb
define Device/ralink_mt7620a-mt7530-evb
- DTS := MT7620a_MT7530
+ MTK_SOC := mt7620a
DEVICE_VENDOR := MediaTek
DEVICE_MODEL := MT7620a + MT7530 EVB
SUPPORTED_DEVICES += mt7620a_mt7530
TARGET_DEVICES += ralink_mt7620a-mt7530-evb
define Device/ralink_mt7620a-mt7610e-evb
- DTS := MT7620a_MT7610e
+ MTK_SOC := mt7620a
DEVICE_VENDOR := MediaTek
DEVICE_MODEL := MT7620a + MT7610e EVB
DEVICE_PACKAGES := kmod-mt76x0e
TARGET_DEVICES += ralink_mt7620a-mt7610e-evb
define Device/ralink_mt7620a-v22sg-evb
- DTS := MT7620a_V22SG
+ MTK_SOC := mt7620a
DEVICE_VENDOR := MediaTek
DEVICE_MODEL := MT7620a V22SG
SUPPORTED_DEVICES += mt7620a_v22sg
TARGET_DEVICES += ralink_mt7620a-v22sg-evb
define Device/planex_mzk-750dhp
- DTS := MZK-750DHP
+ MTK_SOC := mt7620a
DEVICE_VENDOR := Planex
DEVICE_MODEL := MZK-750DHP
DEVICE_PACKAGES := kmod-mt76x0e
TARGET_DEVICES += planex_mzk-750dhp
define Device/planex_mzk-ex300np
- DTS := MZK-EX300NP
+ MTK_SOC := mt7620a
DEVICE_VENDOR := Planex
DEVICE_MODEL := MZK-EX300NP
SUPPORTED_DEVICES += mzk-ex300np
TARGET_DEVICES += planex_mzk-ex300np
define Device/planex_mzk-ex750np
- DTS := MZK-EX750NP
+ MTK_SOC := mt7620a
DEVICE_VENDOR := Planex
DEVICE_MODEL := MZK-EX750NP
DEVICE_PACKAGES := kmod-mt76x2
TARGET_DEVICES += planex_mzk-ex750np
define Device/sercomm_na930
- DTS := NA930
+ MTK_SOC := mt7620a
IMAGE_SIZE := 20m
DEVICE_VENDOR := Sercomm
DEVICE_MODEL := NA930
TARGET_DEVICES += sercomm_na930
define Device/ohyeah_oy-0001
- DTS := OY-0001
+ MTK_SOC := mt7620a
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_VENDOR := Oh Yeah
DEVICE_MODEL := OY-0001
TARGET_DEVICES += ohyeah_oy-0001
define Device/phicomm_psg1208
- DTS := PSG1208
+ MTK_SOC := mt7620a
DEVICE_VENDOR := Phicomm
DEVICE_MODEL := PSG1208
DEVICE_PACKAGES := kmod-mt76x2
TARGET_DEVICES += phicomm_psg1208
define Device/phicomm_psg1218a
- DTS := PSG1218A
+ MTK_SOC := mt7620a
DEVICE_VENDOR := Phicomm
DEVICE_MODEL := PSG1218
DEVICE_VARIANT:= Ax
TARGET_DEVICES += phicomm_psg1218a
define Device/phicomm_psg1218b
- DTS := PSG1218B
+ MTK_SOC := mt7620a
DEVICE_VENDOR := Phicomm
DEVICE_MODEL := PSG1218
DEVICE_VARIANT := Bx
TARGET_DEVICES += phicomm_psg1218b
define Device/phicomm_k2g
- DTS := K2G
+ MTK_SOC := mt7620a
IMAGE_SIZE := 7552k
DEVICE_VENDOR := Phicomm
DEVICE_MODEL := K2G
TARGET_DEVICES += phicomm_k2g
define Device/asus_rp-n53
- DTS := RP-N53
+ MTK_SOC := mt7620a
DEVICE_VENDOR := Asus
DEVICE_MODEL := RP-N53
DEVICE_PACKAGES := kmod-rt2800-pci
TARGET_DEVICES += asus_rp-n53
define Device/asus_rt-n12p
- DTS := RT-N12-PLUS
+ MTK_SOC := mt7620n
DEVICE_VENDOR := Asus
DEVICE_MODEL := RT-N11P/RT-N12+/RT-N12Eb1
SUPPORTED_DEVICES += rt-n12p
TARGET_DEVICES += asus_rt-n12p
define Device/asus_rt-n14u
- DTS := RT-N14U
+ MTK_SOC := mt7620n
DEVICE_VENDOR := Asus
DEVICE_MODEL := RT-N14u
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
TARGET_DEVICES += asus_rt-n14u
define Device/asus_rt-ac51u
- DTS := RT-AC51U
+ MTK_SOC := mt7620a
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_VENDOR := Asus
DEVICE_MODEL := RT-AC51U
TARGET_DEVICES += asus_rt-ac51u
define Device/dovado_tiny-ac
- DTS := TINY-AC
+ MTK_SOC := mt7620a
DEVICE_VENDOR := Dovado
DEVICE_MODEL := Tiny AC
DEVICE_PACKAGES := kmod-mt76x0e kmod-usb2 kmod-usb-ohci
TARGET_DEVICES += dovado_tiny-ac
define Device/edimax_br-6478ac-v2
- DTS := BR-6478AC-V2
+ MTK_SOC := mt7620a
DEVICE_VENDOR := Edimax
DEVICE_MODEL := BR-6478AC
DEVICE_VARIANT := V2
TARGET_DEVICES += edimax_br-6478ac-v2
define Device/edimax_ew-7476rpc
- DTS := EW-7476RPC
+ MTK_SOC := mt7620a
DEVICE_VENDOR := Edimax
DEVICE_MODEL := EW-7476RPC
BLOCKSIZE := 4k
TARGET_DEVICES += edimax_ew-7476rpc
define Device/edimax_ew-7478ac
- DTS := EW-7478AC
+ MTK_SOC := mt7620a
DEVICE_VENDOR := Edimax
DEVICE_MODEL := EW-7478AC
BLOCKSIZE := 4k
TARGET_DEVICES += edimax_ew-7478ac
define Device/edimax_ew-7478apc
- DTS := EW-7478APC
+ MTK_SOC := mt7620a
DEVICE_VENDOR := Edimax
DEVICE_MODEL := EW-7478APC
BLOCKSIZE := 4k
define Device/tplink_archer-c2-v1
$(Device/Archer)
- DTS := ArcherC2-v1
SUPPORTED_DEVICES += tplink,c2-v1
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0xc7500001
define Device/tplink_archer-c20-v1
$(Device/Archer)
- DTS := ArcherC20v1
SUPPORTED_DEVICES += tplink,c20-v1
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0xc2000001
TARGET_DEVICES += tplink_archer-c20-v1
define Device/vonets_var11n-300
- DTS := VAR11N-300
+ MTK_SOC := mt7620n
IMAGE_SIZE := $(ralink_default_fw_size_4M)
BLOCKSIZE := 4k
DEVICE_VENDOR := Vonets
TARGET_DEVICES += vonets_var11n-300
define Device/ravpower_wd03
- DTS := WD03
+ MTK_SOC := mt7620n
IMAGE_SIZE := $(ralink_default_fw_size_8M)
DEVICE_VENDOR := Ravpower
DEVICE_MODEL := WD03
TARGET_DEVICES += ravpower_wd03
define Device/buffalo_whr-1166d
- DTS := WHR-1166D
+ MTK_SOC := mt7620a
IMAGE_SIZE := 15040k
DEVICE_VENDOR := Buffalo
DEVICE_MODEL := WHR-1166D
TARGET_DEVICES += buffalo_whr-1166d
define Device/buffalo_whr-300hp2
- DTS := WHR-300HP2
+ MTK_SOC := mt7620a
IMAGE_SIZE := 6848k
DEVICE_VENDOR := Buffalo
DEVICE_MODEL := WHR-300HP2
TARGET_DEVICES += buffalo_whr-300hp2
define Device/buffalo_whr-600d
- DTS := WHR-600D
+ MTK_SOC := mt7620a
IMAGE_SIZE := 6848k
DEVICE_VENDOR := Buffalo
DEVICE_MODEL := WHR-600D
TARGET_DEVICES += buffalo_whr-600d
define Device/buffalo_wmr-300
- DTS := WMR-300
+ MTK_SOC := mt7620n
DEVICE_VENDOR := Buffalo
DEVICE_MODEL := WMR-300
SUPPORTED_DEVICES += wmr-300
TARGET_DEVICES += buffalo_wmr-300
define Device/netgear_wn3000rp-v3
+ MTK_SOC := mt7620a
NETGEAR_HW_ID := 29764836+8+0+32+2x2+0
NETGEAR_BOARD_ID := WN3000RPv3
- DTS := WN3000RPV3
BLOCKSIZE := 4k
IMAGES += factory.bin
KERNEL := $(KERNEL_DTB) | uImage lzma | pad-offset 64k 64 | append-uImage-fakehdr filesystem
TARGET_DEVICES += netgear_wn3000rp-v3
define Device/elecom_wrh-300cr
- DTS := WRH-300CR
+ MTK_SOC := mt7620n
IMAGE_SIZE := $(ralink_default_fw_size_16M)
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
TARGET_DEVICES += elecom_wrh-300cr
define Device/wrtnode_wrtnode
- DTS := WRTNODE
+ MTK_SOC := mt7620n
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_VENDOR := WRTNode
DEVICE_MODEL := WRTNode
TARGET_DEVICES += wrtnode_wrtnode
define Device/nexx_wt3020-4m
- DTS := WT3020-4M
+ MTK_SOC := mt7620n
BLOCKSIZE := 4k
IMAGE_SIZE := $(ralink_default_fw_size_4M)
IMAGES += factory.bin
TARGET_DEVICES += nexx_wt3020-4m
define Device/nexx_wt3020-8m
- DTS := WT3020-8M
+ MTK_SOC := mt7620n
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
poray-header -B WT3020 -F 8M
TARGET_DEVICES += nexx_wt3020-8m
define Device/lenovo_newifi-y1
- DTS := Y1
+ MTK_SOC := mt7620a
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_VENDOR := Lenovo
DEVICE_MODEL := Y1
TARGET_DEVICES += lenovo_newifi-y1
define Device/lenovo_newifi-y1s
- DTS := Y1S
+ MTK_SOC := mt7620a
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_VENDOR := Lenovo
DEVICE_MODEL := Y1S
TARGET_DEVICES += lenovo_newifi-y1s
define Device/youku_yk1
- DTS := YOUKU-YK1
+ MTK_SOC := mt7620a
IMAGE_SIZE := $(ralink_default_fw_size_32M)
DEVICE_VENDOR := YOUKU
DEVICE_MODEL := YK1
TARGET_DEVICES += youku_yk1
define Device/zbtlink_we1026-5g-16m
- DTS := WE1026-5G-16M
+ MTK_SOC := mt7620a
IMAGE_SIZE := 16777216
DEVICE_VENDOR := Zbtlink
DEVICE_MODEL := ZBT-WE1026-5G
TARGET_DEVICES += zbtlink_we1026-5g-16m
define Device/zbtlink_zbt-ape522ii
- DTS := ZBT-APE522II
+ MTK_SOC := mt7620a
DEVICE_VENDOR := Zbtlink
DEVICE_MODEL := ZBT-APE522II
DEVICE_PACKAGES := kmod-mt76x2
TARGET_DEVICES += zbtlink_zbt-ape522ii
define Device/zbtlink_zbt-cpe102
- DTS := ZBT-CPE102
+ MTK_SOC := mt7620n
DEVICE_VENDOR := Zbtlink
DEVICE_MODEL := ZBT-CPE102
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
TARGET_DEVICES += zbtlink_zbt-cpe102
define Device/zbtlink_zbt-wa05
- DTS := ZBT-WA05
+ MTK_SOC := mt7620n
DEVICE_VENDOR := Zbtlink
DEVICE_MODEL := ZBT-WA05
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
TARGET_DEVICES += zbtlink_zbt-wa05
define Device/zbtlink_zbt-we2026
- DTS := ZBT-WE2026
+ MTK_SOC := mt7620n
DEVICE_VENDOR := Zbtlink
DEVICE_MODEL := ZBT-WE2026
SUPPORTED_DEVICES += zbt-we2026
TARGET_DEVICES += zbtlink_zbt-we2026
define Device/zbtlink_zbt-we826-16m
- DTS := ZBT-WE826-16M
+ MTK_SOC := mt7620a
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_VENDOR := Zbtlink
DEVICE_MODEL := ZBT-WE826
TARGET_DEVICES += zbtlink_zbt-we826-16m
define Device/zbtlink_zbt-we826-32m
- DTS := ZBT-WE826-32M
+ MTK_SOC := mt7620a
IMAGE_SIZE := $(ralink_default_fw_size_32M)
DEVICE_VENDOR := Zbtlink
DEVICE_MODEL := ZBT-WE826
TARGET_DEVICES += zbtlink_zbt-we826-32m
define Device/zbtlink_zbt-we826-e
- DTS := ZBT-WE826-E
+ MTK_SOC := mt7620a
IMAGE_SIZE := 32448k
DEVICE_VENDOR := Zbtlink
DEVICE_MODEL := ZBT-WE826-E
TARGET_DEVICES += zbtlink_zbt-we826-e
define Device/zbtlink_zbt-wr8305rt
- DTS := ZBT-WR8305RT
+ MTK_SOC := mt7620n
DEVICE_VENDOR := Zbtlink
DEVICE_MODEL := ZBT-WR8305RT
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
TARGET_DEVICES += zbtlink_zbt-wr8305rt
define Device/zte_q7
- DTS := ZTE-Q7
+ MTK_SOC := mt7620a
DEVICE_VENDOR := ZTE
DEVICE_MODEL := Q7
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
projects / openwrt / staging / ansuel.git / commitdiff