rtl838x: add DLink DGS-1210-16 support

Signed-off-by: John Crispin <john@phrozen.org>

diff --git a/target/linux/rtl838x/dts/rtl8382_d-link_dgs-1210-16.dts b/target/linux/rtl838x/dts/rtl8382_d-link_dgs-1210-16.dts
new file mode 100644 (file)
index 0000000..ffb3dca
--- /dev/null
+++ b/target/linux/rtl838x/dts/rtl8382_d-link_dgs-1210-16.dts
@@ -0,0 +1,337 @@
+/dts-v1/;
+
+#include "rtl838x.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+       compatible = "d-link,dgs-1210-16", "realtek,rtl838x-soc";
+       model = "D-Link DGS-1210-16";
+
+       aliases {
+               led-boot = &led_power;
+               led-failsafe = &led_power;
+               led-running = &led_power;
+               led-upgrade = &led_power;
+       };      
+
+       chosen {
+               bootargs = "console=ttyS0,115200";
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               led_power: power {
+                       label = "dgs-1210-16:green:power";
+                       gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&gpio0 {
+       indirect-access-bus-id = <0>;
+};
+
+&spi0 {
+       status = "okay";
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <10000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x00000000 0x80000>;
+                               read-only;
+                       };
+                       partition@80000 {
+                               label = "u-boot-env";
+                               reg = <0x00080000 0x40000>;
+                               read-only;
+                       };
+                       partition@c0000 {
+                               label = "u-boot-env2";
+                               reg = <0x000c0000 0x40000>;
+                               read-only;
+                       };
+                       partition@280000 {
+                               label = "firmware";
+                               compatible = "denx,uimage";
+                               reg = <0x00100000 0xd80000>;
+                       };
+                       partition@be80000 {
+                               label = "kernel2";
+                               reg = <0x00e80000 0x180000>;
+                       };
+                       partition@1000000 {
+                               label = "sysinfo";
+                               reg = <0x01000000 0x40000>;
+                       };
+                       partition@1040000 {
+                               label = "rootfs2";
+                               reg = <0x01040000 0xc00000>;
+                       };
+                       partition@1c40000 {
+                               label = "jffs2";
+                               reg = <0x01c40000 0x3c0000>;
+                       };
+               };
+       };
+};
+
+&ethernet0 {
+       mdio: mdio-bus {
+               compatible = "realtek,rtl838x-mdio";
+               regmap = <&ethernet0>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+               
+               /* External phy RTL8218B */
+               phy0: ethernet-phy@0 {
+                       reg = <0>;
+                       compatible = "ethernet-phy-ieee802.3-c22";
+               };
+               phy1: ethernet-phy@1 {
+                       reg = <1>;
+                       compatible = "ethernet-phy-ieee802.3-c22";
+               };
+               phy2: ethernet-phy@2 {
+                       reg = <2>;
+                       compatible = "ethernet-phy-ieee802.3-c22";
+               };
+               phy3: ethernet-phy@3 {
+                       reg = <3>;
+                       compatible = "ethernet-phy-ieee802.3-c22";
+               };
+               phy4: ethernet-phy@4 {
+                       reg = <4>;
+                       compatible = "ethernet-phy-ieee802.3-c22";
+               };
+               phy5: ethernet-phy@5 {
+                       reg = <5>;
+                       compatible = "ethernet-phy-ieee802.3-c22";
+               };
+               phy6: ethernet-phy@6 {
+                       reg = <6>;
+                       compatible = "ethernet-phy-ieee802.3-c22";
+               };
+               phy7: ethernet-phy@7 {
+                       reg = <7>;
+                       compatible = "ethernet-phy-ieee802.3-c22";
+               };
+
+               /* Internal phy RTL8218B */
+               phy8: ethernet-phy@8 {
+                       reg = <8>;
+                       compatible = "ethernet-phy-ieee802.3-c22";
+                       phy-is-integrated;
+               };
+               phy9: ethernet-phy@9 {
+                       reg = <9>;
+                       compatible = "ethernet-phy-ieee802.3-c22";
+                       phy-is-integrated;
+               };
+               phy10: ethernet-phy@10 {
+                       reg = <10>;
+                       compatible = "ethernet-phy-ieee802.3-c22";
+                       phy-is-integrated;
+               };
+               phy11: ethernet-phy@11 {
+                       reg = <11>;
+                       compatible = "ethernet-phy-ieee802.3-c22";
+                       phy-is-integrated;
+               };
+               phy12: ethernet-phy@12 {
+                       reg = <12>;
+                       compatible = "ethernet-phy-ieee802.3-c22";
+                       phy-is-integrated;
+               };
+               phy13: ethernet-phy@13 {
+                       reg = <13>;
+                       compatible = "ethernet-phy-ieee802.3-c22";
+                       phy-is-integrated;
+               };
+               phy14: ethernet-phy@14 {
+                       reg = <14>;
+                       compatible = "ethernet-phy-ieee802.3-c22";
+                       phy-is-integrated;
+               };
+               phy15: ethernet-phy@15 {
+                       reg = <15>;
+                       compatible = "ethernet-phy-ieee802.3-c22";
+                       phy-is-integrated;
+               };
+               
+               /* External phy: RTL8214FC */
+               phy24: ethernet-phy@24 {
+                       compatible = "ethernet-phy-ieee802.3-c22";
+                       sfp;
+                       media = "fibre";
+                       reg = <24>;
+               };
+               phy25: ethernet-phy@25 {
+                       compatible = "ethernet-phy-ieee802.3-c22";
+                       sfp;
+                       media = "fibre";
+                       reg = <25>;
+               };
+               phy26: ethernet-phy@26 {
+                       compatible = "ethernet-phy-ieee802.3-c22";
+                       sfp;
+                       media = "fibre";
+                       reg = <26>;
+               };
+               phy27: ethernet-phy@27 {
+                       compatible = "ethernet-phy-ieee802.3-c22";
+                       sfp;
+                       media = "fibre";
+                       reg = <27>;
+               };
+       };
+};
+
+&switch0 {
+       ports {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               port@0 {
+                       reg = <0>;
+                       label = "lan1";
+                       phy-handle = <&phy0>;
+                       phy-mode = "qsgmii";
+               };
+               port@1 {
+                       reg = <1>;
+                       label = "lan2";
+                       phy-handle = <&phy1>;
+                       phy-mode = "qsgmii";
+               };
+               port@2 {
+                       reg = <2>;
+                       label = "lan3";
+                       phy-handle = <&phy2>;
+                       phy-mode = "qsgmii";
+               };
+               port@3 {
+                       reg = <3>;
+                       label = "lan4";
+                       phy-handle = <&phy3>;
+                       phy-mode = "qsgmii";
+               };
+               port@4 {
+                       reg = <4>;
+                       label = "lan5";
+                       phy-handle = <&phy4>;
+                       phy-mode = "qsgmii";
+               };
+               port@5 {
+                       reg = <5>;
+                       label = "lan6";
+                       phy-handle = <&phy5>;
+                       phy-mode = "qsgmii";
+               };
+               port@6 {
+                       reg = <6>;
+                       label = "lan7";
+                       phy-handle = <&phy6>;
+                       phy-mode = "qsgmii";
+               };
+               port@7 {
+                       reg = <7>;
+                       label = "lan8";
+                       phy-handle = <&phy7>;
+                       phy-mode = "qsgmii";
+               };
+               
+               port@8 {
+                       reg = <8>;
+                       label = "lan9";
+                       phy-handle = <&phy8>;
+                       phy-mode = "internal";
+               };
+               port@9 {
+                       reg = <9>;
+                       label = "lan10";
+                       phy-handle = <&phy9>;
+                       phy-mode = "internal";
+               };
+               port@10 {
+                       reg = <10>;
+                       label = "lan11";
+                       phy-handle = <&phy10>;
+                       phy-mode = "internal";
+               };
+               port@11 {
+                       reg = <11>;
+                       label = "lan12";
+                       phy-handle = <&phy11>;
+                       phy-mode = "internal";
+               };
+               port@12 {
+                       reg = <12>;
+                       label = "lan13";
+                       phy-handle = <&phy12>;
+                       phy-mode = "internal";
+               };
+               port@13 {
+                       reg = <13>;
+                       label = "lan14";
+                       phy-handle = <&phy13>;
+                       phy-mode = "internal";
+               };
+               port@14 {
+                       reg = <14>;
+                       label = "lan15";
+                       phy-handle = <&phy14>;
+                       phy-mode = "internal";
+               };
+               port@15 {
+                       reg = <15>;
+                       label = "lan16";
+                       phy-handle = <&phy15>;
+                       phy-mode = "internal";
+               };
+
+               port@24 {
+                       reg = <24>;
+                       label = "lan17";
+                       phy-handle = <&phy24>;
+                       phy-mode = "qsgmii";
+               };
+               port@25 {
+                       reg = <25>;
+                       label = "lan18";
+                       phy-handle = <&phy25>;
+                       phy-mode = "qsgmii";
+               };
+               port@26 {
+                       reg = <26>;
+                       label = "lan19";
+                       phy-handle = <&phy26>;
+                       phy-mode = "qsgmii";
+               };
+               port@27 {
+                       reg = <27>;
+                       label = "lan20";
+                       phy-handle = <&phy27>;
+                       phy-mode = "qsgmii";
+               };
+               port@28 {
+                       ethernet = <&ethernet0>;
+                       reg = <28>;
+                       phy-mode = "internal";
+                       fixed-link {
+                               speed = <1000>;
+                               full-duplex;
+                       };
+               };
+       };
+};

diff --git a/target/linux/rtl838x/image/Makefile b/target/linux/rtl838x/image/Makefile
index eef1fe0a33dbc0ac21eadc78c6858ae73ecaab5f..291888ab2deff4428901e903146f412e50d8fbc3 100644 (file)
--- a/target/linux/rtl838x/image/Makefile
+++ b/target/linux/rtl838x/image/Makefile
@@ -41,4 +41,13 @@ define Device/allnet_all-sg8208m
 endef
 TARGET_DEVICES += allnet_all-sg8208m
 
+define Device/d-link_dgs-1210-16
+  SOC := rtl8382
+  IMAGE_SIZE := 13824k
+  DEVICE_VENDOR := D-Link
+  DEVICE_MODEL := DGS-1210-16
+  DEVICE_PACKAGES := ip-full ip-bridge ethtool tc
+endef
+TARGET_DEVICES += d-link_dgs-1210-16
+
 $(eval $(call BuildImage))