#address-cells = <1>;
#size-cells = <0>;
+
+ usb_ehci_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
};
usb1: usb@1c000000 {
#address-cells = <1>;
#size-cells = <0>;
+
+ usb_ohci_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
};
spi: spi@1f000000 {
};
&usb1 {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- usb_ohci_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&usb2 {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- usb_ehci_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&pcie0 {
};
&usb1 {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- usb_ohci_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&usb2 {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- usb_ehci_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&usb_phy {
};
&usb1 {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- usb_ohci_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&usb2 {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- usb_ehci_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&pcie0 {
&usb1 {
status = "okay";
- #address-cells = <1>;
- #size-cells = <0>;
-
- usb_ohci_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&usb2 {
status = "okay";
- #address-cells = <1>;
- #size-cells = <0>;
-
- usb_ehci_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
#address-cells = <1>;
#size-cells = <0>;
+
+ hub_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
};
};
#address-cells = <1>;
#size-cells = <0>;
+
+ hub_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
};
};
};
&usb {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- hub_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
};
&usb {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- hub_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&usb_phy {
};
&usb {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- hub_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&usb_phy {
#address-cells = <1>;
#size-cells = <0>;
+
+ hub_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
};
};
};
&usb {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- hub_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
};
&usb {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- hub_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&art {
};
&usb {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- hub_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&usb_phy {
};
&usb {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- hub_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&pcie {
phys = <&usb_phy>;
status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hub_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
};
spi: spi@1f000000 {
&usb {
status = "okay";
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- hub_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&usb_phy {
};
&usb {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- hub_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&usb_phy {
#address-cells = <1>;
#size-cells = <0>;
+
+ hub_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
};
spi: spi@1f000000 {
usb {
label = "white:usb";
gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
- trigger-sources = <&hub_port1>;
+ trigger-sources = <&hub_port>;
linux,default-trigger = "usbport";
};
};
&usb {
status = "okay";
- #address-cells = <1>;
- #size-cells = <0>;
dr_mode = "host";
vbus-supply = <®_usb_vbus>;
-
- port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- #trigger-source-cells = <0>;
-
- hub_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
- };
};
&usb_phy {
};
&usb {
- #address-cells = <1>;
- #size-cells = <0>;
dr_mode = "host";
vbus-supply = <®_usb_vbus>;
status = "okay";
-
- hub_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&usb_phy {
};
&usb {
- #address-cells = <1>;
- #size-cells = <0>;
dr_mode = "host";
vbus-supply = <®_usb_vbus>;
status = "okay";
-
- hub_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&usb_phy {
};
&usb {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- hub_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&usb_phy {
};
&usb {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- hub_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&usb_phy {
usb {
label = "green:usb";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
- trigger-sources = <&hub_port1>;
+ trigger-sources = <&hub_port>;
linux,default-trigger = "usbport";
};
};
&usb {
status = "okay";
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- hub_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&usb_phy {
label = "blue:usb";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
linux,default-trigger = "usbport";
- trigger-sources = <&hub_port1>;
+ trigger-sources = <&hub_port>;
};
wan_blue {
&usb {
status = "okay";
- #address-cells = <1>;
- #size-cells = <0>;
-
- hub_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&usb_phy {
&usb {
status = "okay";
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- hub_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&usb_phy {
&usb {
status = "okay";
- #address-cells = <1>;
- #size-cells = <0>;
-
- hub_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&usb {
status = "okay";
- #address-cells = <1>;
- #size-cells = <0>;
-
- hub_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&usb_phy {
};
&usb {
+ status = "okay";
+};
+
+&hub_port {
#address-cells = <1>;
#size-cells = <0>;
- status = "okay";
port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
+ compatible = "usb-a-connector";
reg = <1>;
+ };
- port@1 {
- compatible = "usb-a-connector";
- reg = <1>;
- };
-
- port@3 {
- label = "RS-232 serial adapter";
- reg = <3>;
- };
+ port@3 {
+ label = "RS-232 serial adapter";
+ reg = <3>;
+ };
- port@4 {
- label = "internal wwan modem";
- reg = <4>;
- };
+ port@4 {
+ label = "internal wwan modem";
+ reg = <4>;
};
};
};
&usb {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- hub_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&usb_phy {
};
&usb {
+ status = "okay";
+};
+
+&hub_port {
#address-cells = <1>;
#size-cells = <0>;
- status = "okay";
- port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
+ hub_port1: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
+ };
- hub_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-
- hub_port2: port@2 {
- reg = <2>;
- #trigger-source-cells = <0>;
- };
+ hub_port2: port@2 {
+ reg = <2>;
+ #trigger-source-cells = <0>;
};
};
};
&usb {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- #trigger-source-cells = <0>;
-
- hub_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-
- hub_port2: port@2 {
- reg = <2>;
- #trigger-source-cells = <0>;
- };
- };
};
&mdio0 {
usb {
label = "green:usb";
gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
- trigger-sources = <&hub_port1>, <&hub_port2>;
+ trigger-sources = <&hub_port>;
linux,default-trigger = "usbport";
};
};
&usb {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- #trigger-source-cells = <0>;
-
- hub_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-
- hub_port2: port@2 {
- reg = <2>;
- #trigger-source-cells = <0>;
- };
- };
};
&usb_phy {
#address-cells = <1>;
#size-cells = <0>;
+
+ hub_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
};
nand: nand@1b000200 {
&usb0 {
status = "okay";
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- hub_port0: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&usb_phy {
};
&usb0 {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- hub_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&usb_phy {
};
&usb0 {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
ð0 {
};
&usb0 {
- #address-cells = <1>;
- #size-cells = <0>;
vbus-supply = <®_usb_vbus>;
status = "okay";
};
};
&usb0 {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- hub_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&usb_phy {
};
&usb0 {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- hub_port0: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&usb_phy {
};
&usb0 {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- hub_port0: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&romfile {
usb {
label = "green:usb";
gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
- trigger-sources = <&hub_port>;
+ trigger-sources = <&hub_port0>;
linux,default-trigger = "usbport";
};
};
&usb0 {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- hub_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&usb_phy {
};
&usb0 {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- hub_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&usb_phy {
};
&usb0 {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- hub_port0: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&info {
label = "green:usb";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
linux,default-trigger = "usbport";
- trigger-sources = <&hub_port>;
+ trigger-sources = <&hub_port0>;
};
};
};
&usb0 {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- hub_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&usb_phy {
#address-cells = <1>;
#size-cells = <0>;
+
+ hub_port0: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
};
spi: spi@1f000000 {
&usb0 {
status = "okay";
-
- #address-cells = <1>;
- #size-cells = <0>;
};
&usb_phy1 {
&usb1 {
status = "okay";
-
- #address-cells = <1>;
- #size-cells = <0>;
};
&art {
};
&usb0 {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- hub_port0: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&spi {
};
&usb0 {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- hub_port0: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&usb_phy1 {
};
&usb1 {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- hub_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&spi {
};
&usb0 {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
};
};
&usb1 {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
};
};
&usb0 {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
};
&usb0 {
vbus-supply = <®_usb_vbus>;
-
- hub_port0: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
};
&usb0 {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- hub_port0: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&usb_phy1 {
};
&usb1 {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- hub_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&spi {
};
&usb0 {
- #address-cells = <1>;
- #size-cells = <0>;
dr_mode = "host";
vbus-supply = <®_usb0_vbus>;
status = "okay";
-
- hub_port0: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&usb_phy1 {
};
&usb1 {
- #address-cells = <1>;
- #size-cells = <0>;
dr_mode = "host";
vbus-supply = <®_usb1_vbus>;
status = "okay";
-
- hub_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
};
&usb0 {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- hub_port0: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&usb_phy1 {
};
&usb1 {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- hub_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&spi {
};
&usb0 {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- hub_port0: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&spi {
};
&usb0 {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- hub_port0: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&usb_phy1 {
};
&usb1 {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- hub_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&spi {
#address-cells = <1>;
#size-cells = <0>;
+
+ hub_port0: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
};
usb1: usb@1b400000 {
#address-cells = <1>;
#size-cells = <0>;
+
+ hub_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
};
nand: nand@1b800200 {
&usb0 {
status = "okay";
-
- hub_port0: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-
};
&usb1 {
status = "okay";
-
- hub_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
label = "green:usb";
gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
linux,default-trigger = "usbport";
- trigger-sources = <&hub_port>;
+ trigger-sources = <&hub_port0>;
};
};
&usb0 {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- hub_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&usb_phy0 {
label = "green:usb";
gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
linux,default-trigger = "usbport";
- trigger-sources = <&hub_port>;
+ trigger-sources = <&hub_port0>;
};
};
&usb0 {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- hub_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&usb_phy0 {
};
&usb0 {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- hub_port0: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&caldata {
};
&usb1 {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- hub_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
};
&usb0 {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- hub_port0: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&usb_phy1 {
};
&usb0 {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&usb_phy1 {
};
&usb1 {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- port@2 {
- reg = <2>;
- #trigger-source-cells = <0>;
- };
};
&info {
};
&usb0 {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- hub_port0: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&usb_phy1 {
};
&usb1 {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- hub_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&spi {
};
&usb0 {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- hub_port0: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&spi {
};
&usb0 {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- hub_port0: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
ð0 {
#address-cells = <1>;
#size-cells = <0>;
+
+ hub_port0: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
};
usb1: usb@1b400000 {
#address-cells = <1>;
#size-cells = <0>;
+
+ hub_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
};
spi: spi@1f000000 {
};
&usb0 {
- #address-cells = <1>;
- #size-cells = <0>;
status = "okay";
-
- hub_port0: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&wmac {