;;
"ath10k/pre-cal-ahb-a000000.wifi.bin")
case "$board" in
- qcom,ap-dk01.1-c1)
- caldata_extract "ART" 0x1000 0x2f20
- ;;
asus,map-ac2200|\
asus,rt-ac42u|\
asus,rt-ac58u)
;;
"ath10k/pre-cal-ahb-a800000.wifi.bin")
case "$board" in
- qcom,ap-dk01.1-c1)
- caldata_extract "ART" 0x5000 0x2f20
- ;;
asus,map-ac2200|\
asus,rt-ac58u)
caldata_extract_ubi "Factory" 0x5000 0x2f20
endef
TARGET_DEVICES += plasmacloud_pa2200
-define Device/qcom_ap-dk01.1-c1
- DEVICE_VENDOR := Qualcomm Atheros
- DEVICE_MODEL := AP-DK01.1
- DEVICE_VARIANT := C1
- BOARD_NAME := ap-dk01.1-c1
- SOC := qcom-ipq4019
- DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1
- KERNEL_INSTALL := 1
- KERNEL_SIZE := 4096k
- IMAGE_SIZE := 26624k
- $(call Device/FitImage)
- IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
- DEFAULT := n
-endef
-TARGET_DEVICES += qcom_ap-dk01.1-c1
-
-define Device/qcom_ap-dk04.1-c1
- $(call Device/FitImage)
- $(call Device/UbiFit)
- DEVICE_VENDOR := Qualcomm Atheros
- DEVICE_MODEL := AP-DK04.1
- DEVICE_VARIANT := C1
- SOC := qcom-ipq4019
- DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1
- KERNEL_INSTALL := 1
- KERNEL_SIZE := 4048k
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- BOARD_NAME := ap-dk04.1-c1
- DEFAULT := n
-endef
-TARGET_DEVICES += qcom_ap-dk04.1-c1
-
define Device/qxwlan_e2600ac-c1
$(call Device/FitImage)
DEVICE_VENDOR := Qxwlan
+++ /dev/null
---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
-@@ -15,6 +15,7 @@
- */
-
- #include "qcom-ipq4019.dtsi"
-+#include <dt-bindings/soc/qcom,tcsr.h>
-
- / {
- model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1";
-@@ -29,6 +30,32 @@
- };
-
- soc {
-+ tcsr@194b000 {
-+ /* select hostmode */
-+ compatible = "qcom,tcsr";
-+ reg = <0x194b000 0x100>;
-+ qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-+ status = "okay";
-+ };
-+
-+ ess_tcsr@1953000 {
-+ compatible = "qcom,tcsr";
-+ reg = <0x1953000 0x1000>;
-+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-+ };
-+
-+ tcsr@1949000 {
-+ compatible = "qcom,tcsr";
-+ reg = <0x1949000 0x100>;
-+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-+ };
-+
-+ tcsr@1957000 {
-+ compatible = "qcom,tcsr";
-+ reg = <0x1957000 0x100>;
-+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-+ };
-+
- rng@22000 {
- status = "okay";
- };
-@@ -74,14 +101,6 @@
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 54 0>;
--
-- mx25l25635e@0 {
-- #address-cells = <1>;
-- #size-cells = <1>;
-- reg = <0>;
-- compatible = "mx25l25635e";
-- spi-max-frequency = <24000000>;
-- };
- };
-
- serial@78af000 {
-@@ -109,5 +128,29 @@
- wifi@a800000 {
- status = "okay";
- };
-+
-+ mdio@90000 {
-+ status = "okay";
-+ };
-+
-+ usb3_ss_phy: ssphy@9a000 {
-+ status = "okay";
-+ };
-+
-+ usb3_hs_phy: hsphy@a6000 {
-+ status = "okay";
-+ };
-+
-+ usb3: usb3@8af8800 {
-+ status = "okay";
-+ };
-+
-+ usb2_hs_phy: hsphy@a8000 {
-+ status = "okay";
-+ };
-+
-+ usb2: usb2@60f8800 {
-+ status = "okay";
-+ };
- };
- };
---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
-+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
-@@ -18,5 +18,73 @@
-
- / {
- model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C1";
-+ compatible = "qcom,ap-dk01.1-c1", "qcom,ap-dk01.2-c1";
-
-+ memory {
-+ device_type = "memory";
-+ reg = <0x80000000 0x10000000>;
-+ };
-+};
-+
-+&blsp1_spi1 {
-+ mx25l25635f@0 {
-+ compatible = "mx25l25635f", "jedec,spi-nor";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ reg = <0>;
-+ spi-max-frequency = <24000000>;
-+
-+ SBL1@0 {
-+ label = "SBL1";
-+ reg = <0x0 0x40000>;
-+ read-only;
-+ };
-+ MIBIB@40000 {
-+ label = "MIBIB";
-+ reg = <0x40000 0x20000>;
-+ read-only;
-+ };
-+ QSEE@60000 {
-+ label = "QSEE";
-+ reg = <0x60000 0x60000>;
-+ read-only;
-+ };
-+ CDT@c0000 {
-+ label = "CDT";
-+ reg = <0xc0000 0x10000>;
-+ read-only;
-+ };
-+ DDRPARAMS@d0000 {
-+ label = "DDRPARAMS";
-+ reg = <0xd0000 0x10000>;
-+ read-only;
-+ };
-+ APPSBLENV@e0000 {
-+ label = "APPSBLENV";
-+ reg = <0xe0000 0x10000>;
-+ read-only;
-+ };
-+ APPSBL@f0000 {
-+ label = "APPSBL";
-+ reg = <0xf0000 0x80000>;
-+ read-only;
-+ };
-+ ART@170000 {
-+ label = "ART";
-+ reg = <0x170000 0x10000>;
-+ read-only;
-+ };
-+ kernel@180000 {
-+ label = "kernel";
-+ reg = <0x180000 0x400000>;
-+ };
-+ rootfs@580000 {
-+ label = "rootfs";
-+ reg = <0x580000 0x1600000>;
-+ };
-+ firmware@180000 {
-+ label = "firmware";
-+ reg = <0x180000 0x1a00000>;
-+ };
-+ };
- };
+++ /dev/null
---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
-@@ -17,53 +17,79 @@
- stdout-path = "serial0:115200n8";
- };
-
-- memory {
-- device_type = "memory";
-- reg = <0x80000000 0x10000000>; /* 256MB */
-- };
--
- soc {
-+ rng@22000 {
-+ status = "okay";
-+ };
-+
- pinctrl@1000000 {
- serial_0_pins: serial0-pinmux {
-- pins = "gpio16", "gpio17";
-- function = "blsp_uart0";
-- bias-disable;
-+ mux {
-+ pins = "gpio16", "gpio17";
-+ function = "blsp_uart0";
-+ bias-disable;
-+ };
- };
-
- serial_1_pins: serial1-pinmux {
-- pins = "gpio8", "gpio9",
-- "gpio10", "gpio11";
-- function = "blsp_uart1";
-- bias-disable;
-+ mux {
-+ pins = "gpio8", "gpio9";
-+ function = "blsp_uart1";
-+ bias-disable;
-+ };
- };
-
- spi_0_pins: spi-0-pinmux {
- pinmux {
- function = "blsp_spi0";
- pins = "gpio13", "gpio14", "gpio15";
-- bias-disable;
- };
- pinmux_cs {
- function = "gpio";
- pins = "gpio12";
-+ };
-+ pinconf {
-+ pins = "gpio13", "gpio14", "gpio15";
-+ drive-strength = <12>;
-+ bias-disable;
-+ };
-+ pinconf_cs {
-+ pins = "gpio12";
-+ drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-
- i2c_0_pins: i2c-0-pinmux {
-- pins = "gpio20", "gpio21";
-- function = "blsp_i2c0";
-- bias-disable;
-+ pinmux {
-+ function = "blsp_i2c0";
-+ pins = "gpio10", "gpio11";
-+ };
-+ pinconf {
-+ pins = "gpio10", "gpio11";
-+ drive-strength = <16>;
-+ bias-disable;
-+ };
- };
-
- nand_pins: nand-pins {
-- pins = "gpio53", "gpio55", "gpio56",
-- "gpio57", "gpio58", "gpio59",
-- "gpio60", "gpio62", "gpio63",
-- "gpio64", "gpio65", "gpio66",
-- "gpio67", "gpio68", "gpio69";
-- function = "qpic";
-+ pullups {
-+ pins = "gpio52", "gpio53", "gpio58",
-+ "gpio59";
-+ function = "qpic";
-+ bias-pull-up;
-+ };
-+
-+ pulldowns {
-+ pins = "gpio54", "gpio55", "gpio56",
-+ "gpio57", "gpio60", "gpio61",
-+ "gpio62", "gpio63", "gpio64",
-+ "gpio65", "gpio66", "gpio67",
-+ "gpio68", "gpio69";
-+ function = "qpic";
-+ bias-pull-down;
-+ };
- };
- };
-
-@@ -89,11 +115,11 @@
- status = "okay";
- cs-gpios = <&tlmm 12 0>;
-
-- m25p80@0 {
-+ mx25l25635e@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0>;
-- compatible = "n25q128a11";
-+ compatible = "mx25l25635e";
- spi-max-frequency = <24000000>;
- };
- };
-@@ -102,6 +128,45 @@
- status = "okay";
- perst-gpio = <&tlmm 38 0x1>;
- };
-+
-+ i2c0: i2c@78b7000 { /* BLSP1 QUP2 */
-+ pinctrl-0 = <&i2c_0_pins>;
-+ pinctrl-names = "default";
-+
-+ status = "okay";
-+ };
-+
-+ usb3_ss_phy: ssphy@9a000 {
-+ status = "okay";
-+ };
-+
-+ usb3_hs_phy: hsphy@a6000 {
-+ status = "okay";
-+ };
-+
-+ usb3: usb3@8af8800 {
-+ status = "okay";
-+ };
-+
-+ usb2_hs_phy: hsphy@a8000 {
-+ status = "okay";
-+ };
-+
-+ usb2: usb2@60f8800 {
-+ status = "okay";
-+ };
-+
-+ cryptobam: dma@8e04000 {
-+ status = "okay";
-+ };
-+
-+ crypto@8e3a000 {
-+ status = "okay";
-+ };
-+
-+ watchdog@b017000 {
-+ status = "okay";
-+ };
- };
- };
-
projects / openwrt / staging / robimarko.git / commitdiff