--- /dev/null
+/*
+ * Copyright (c) 2015, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <arch.h>
+#include <arch_helpers.h>
+#include <assert.h>
+#include <debug.h>
+#include <gic_common.h>
+#include "gicv2_private.h"
+
+/*
+ * Accessor to read the GIC Distributor ITARGETSR corresponding to the
+ * interrupt `id`, 4 interrupt IDs at a time.
+ */
+unsigned int gicd_read_itargetsr(uintptr_t base, unsigned int id)
+{
+ unsigned n = id >> ITARGETSR_SHIFT;
+ return mmio_read_32(base + GICD_ITARGETSR + (n << 2));
+}
+
+/*
+ * Accessor to read the GIC Distributor CPENDSGIR corresponding to the
+ * interrupt `id`, 4 interrupt IDs at a time.
+ */
+unsigned int gicd_read_cpendsgir(uintptr_t base, unsigned int id)
+{
+ unsigned n = id >> CPENDSGIR_SHIFT;
+ return mmio_read_32(base + GICD_CPENDSGIR + (n << 2));
+}
+
+/*
+ * Accessor to read the GIC Distributor SPENDSGIR corresponding to the
+ * interrupt `id`, 4 interrupt IDs at a time.
+ */
+unsigned int gicd_read_spendsgir(uintptr_t base, unsigned int id)
+{
+ unsigned n = id >> SPENDSGIR_SHIFT;
+ return mmio_read_32(base + GICD_SPENDSGIR + (n << 2));
+}
+
+/*
+ * Accessor to write the GIC Distributor ITARGETSR corresponding to the
+ * interrupt `id`, 4 interrupt IDs at a time.
+ */
+void gicd_write_itargetsr(uintptr_t base, unsigned int id, unsigned int val)
+{
+ unsigned n = id >> ITARGETSR_SHIFT;
+ mmio_write_32(base + GICD_ITARGETSR + (n << 2), val);
+}
+
+/*
+ * Accessor to write the GIC Distributor CPENDSGIR corresponding to the
+ * interrupt `id`, 4 interrupt IDs at a time.
+ */
+void gicd_write_cpendsgir(uintptr_t base, unsigned int id, unsigned int val)
+{
+ unsigned n = id >> CPENDSGIR_SHIFT;
+ mmio_write_32(base + GICD_CPENDSGIR + (n << 2), val);
+}
+
+/*
+ * Accessor to write the GIC Distributor SPENDSGIR corresponding to the
+ * interrupt `id`, 4 interrupt IDs at a time.
+ */
+void gicd_write_spendsgir(uintptr_t base, unsigned int id, unsigned int val)
+{
+ unsigned n = id >> SPENDSGIR_SHIFT;
+ mmio_write_32(base + GICD_SPENDSGIR + (n << 2), val);
+}
+
+/*
+ * Accessor to write the GIC Distributor ITARGETSR corresponding to the
+ * interrupt `id`.
+ */
+void gicd_set_itargetsr(uintptr_t base, unsigned int id, unsigned int target)
+{
+ unsigned byte_off = id & ((1 << ITARGETSR_SHIFT) - 1);
+ unsigned int reg_val = gicd_read_itargetsr(base, id);
+
+ gicd_write_itargetsr(base, id, reg_val | (target << (byte_off << 3)));
+}
+
+/*******************************************************************************
+ * Get the current CPU bit mask from GICD_ITARGETSR0
+ ******************************************************************************/
+unsigned int gicv2_get_cpuif_id(uintptr_t base)
+{
+ unsigned int val;
+
+ val = gicd_read_itargetsr(base, 0);
+ return val & GIC_TARGET_CPU_MASK;
+}
+
+/*******************************************************************************
+ * Helper function to configure the default attributes of SPIs.
+ ******************************************************************************/
+void gicv2_spis_configure_defaults(uintptr_t gicd_base)
+{
+ unsigned int index, num_ints;
+
+ num_ints = gicd_read_typer(gicd_base);
+ num_ints &= TYPER_IT_LINES_NO_MASK;
+ num_ints = (num_ints + 1) << 5;
+
+ /*
+ * Treat all SPIs as G1NS by default. The number of interrupts is
+ * calculated as 32 * (IT_LINES + 1). We do 32 at a time.
+ */
+ for (index = MIN_SPI_ID; index < num_ints; index += 32)
+ gicd_write_igroupr(gicd_base, index, ~0U);
+
+ /* Setup the default SPI priorities doing four at a time */
+ for (index = MIN_SPI_ID; index < num_ints; index += 4)
+ gicd_write_ipriorityr(gicd_base,
+ index,
+ GICD_IPRIORITYR_DEF_VAL);
+
+ /* Treat all SPIs as level triggered by default, 16 at a time */
+ for (index = MIN_SPI_ID; index < num_ints; index += 16)
+ gicd_write_icfgr(gicd_base, index, 0);
+}
+
+/*******************************************************************************
+ * Helper function to configure secure G0 SPIs.
+ ******************************************************************************/
+void gicv2_secure_spis_configure(uintptr_t gicd_base,
+ unsigned int num_ints,
+ const unsigned int *sec_intr_list)
+{
+ unsigned int index, irq_num;
+
+ /* If `num_ints` is not 0, ensure that `sec_intr_list` is not NULL */
+ assert(num_ints ? (uintptr_t)sec_intr_list : 1);
+
+ for (index = 0; index < num_ints; index++) {
+ irq_num = sec_intr_list[index];
+ if (irq_num >= MIN_SPI_ID) {
+ /* Configure this interrupt as a secure interrupt */
+ gicd_clr_igroupr(gicd_base, irq_num);
+
+ /* Set the priority of this interrupt */
+ gicd_write_ipriorityr(gicd_base,
+ irq_num,
+ GIC_HIGHEST_SEC_PRIORITY);
+
+ /* Target the secure interrupts to primary CPU */
+ gicd_set_itargetsr(gicd_base, irq_num,
+ gicv2_get_cpuif_id(gicd_base));
+
+ /* Enable this interrupt */
+ gicd_set_isenabler(gicd_base, irq_num);
+ }
+ }
+
+}
+
+/*******************************************************************************
+ * Helper function to configure secure G0 SGIs and PPIs.
+ ******************************************************************************/
+void gicv2_secure_ppi_sgi_setup(uintptr_t gicd_base,
+ unsigned int num_ints,
+ const unsigned int *sec_intr_list)
+{
+ unsigned int index, irq_num, sec_ppi_sgi_mask = 0;
+
+ /* If `num_ints` is not 0, ensure that `sec_intr_list` is not NULL */
+ assert(num_ints ? (uintptr_t)sec_intr_list : 1);
+
+ /*
+ * Disable all SGIs (imp. def.)/PPIs before configuring them. This is a
+ * more scalable approach as it avoids clearing the enable bits in the
+ * GICD_CTLR.
+ */
+ gicd_write_icenabler(gicd_base, 0, ~0);
+
+ /* Setup the default PPI/SGI priorities doing four at a time */
+ for (index = 0; index < MIN_SPI_ID; index += 4)
+ gicd_write_ipriorityr(gicd_base,
+ index,
+ GICD_IPRIORITYR_DEF_VAL);
+
+ for (index = 0; index < num_ints; index++) {
+ irq_num = sec_intr_list[index];
+ if (irq_num < MIN_SPI_ID) {
+ /* We have an SGI or a PPI. They are Group0 at reset */
+ sec_ppi_sgi_mask |= 1U << irq_num;
+
+ /* Set the priority of this interrupt */
+ gicd_write_ipriorityr(gicd_base,
+ irq_num,
+ GIC_HIGHEST_SEC_PRIORITY);
+ }
+ }
+
+ /*
+ * Invert the bitmask to create a mask for non-secure PPIs and
+ * SGIs. Program the GICD_IGROUPR0 with this bit mask.
+ */
+ gicd_write_igroupr(gicd_base, 0, ~sec_ppi_sgi_mask);
+
+ /* Enable the Group 0 SGIs and PPIs */
+ gicd_write_isenabler(gicd_base, 0, sec_ppi_sgi_mask);
+}
--- /dev/null
+/*
+ * Copyright (c) 2015, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <arch.h>
+#include <arch_helpers.h>
+#include <assert.h>
+#include <debug.h>
+#include <gic_common.h>
+#include <gicv2.h>
+#include "gicv2_private.h"
+
+static const gicv2_driver_data_t *driver_data;
+
+/*******************************************************************************
+ * Enable secure interrupts and use FIQs to route them. Disable legacy bypass
+ * and set the priority mask register to allow all interrupts to trickle in.
+ ******************************************************************************/
+void gicv2_cpuif_enable(void)
+{
+ unsigned int val;
+
+ assert(driver_data);
+ assert(driver_data->gicc_base);
+
+ /*
+ * Enable the Group 0 interrupts, FIQEn and disable Group 0/1
+ * bypass.
+ */
+ val = CTLR_ENABLE_G0_BIT | FIQ_EN_BIT | FIQ_BYP_DIS_GRP0;
+ val |= IRQ_BYP_DIS_GRP0 | FIQ_BYP_DIS_GRP1 | IRQ_BYP_DIS_GRP1;
+
+ /* Program the idle priority in the PMR */
+ gicc_write_pmr(driver_data->gicc_base, GIC_PRI_MASK);
+ gicc_write_ctlr(driver_data->gicc_base, val);
+}
+
+/*******************************************************************************
+ * Place the cpu interface in a state where it can never make a cpu exit wfi as
+ * as result of an asserted interrupt. This is critical for powering down a cpu
+ ******************************************************************************/
+void gicv2_cpuif_disable(void)
+{
+ unsigned int val;
+
+ assert(driver_data);
+ assert(driver_data->gicc_base);
+
+ /* Disable secure, non-secure interrupts and disable their bypass */
+ val = gicc_read_ctlr(driver_data->gicc_base);
+ val &= ~(CTLR_ENABLE_G0_BIT | CTLR_ENABLE_G1_BIT);
+ val |= FIQ_BYP_DIS_GRP1 | FIQ_BYP_DIS_GRP0;
+ val |= IRQ_BYP_DIS_GRP0 | IRQ_BYP_DIS_GRP1;
+ gicc_write_ctlr(driver_data->gicc_base, val);
+}
+
+/*******************************************************************************
+ * Per cpu gic distributor setup which will be done by all cpus after a cold
+ * boot/hotplug. This marks out the secure SPIs and PPIs & enables them.
+ ******************************************************************************/
+void gicv2_pcpu_distif_init(void)
+{
+ assert(driver_data);
+ assert(driver_data->gicd_base);
+ assert(driver_data->g0_interrupt_array);
+
+ gicv2_secure_ppi_sgi_setup(driver_data->gicd_base,
+ driver_data->g0_interrupt_num,
+ driver_data->g0_interrupt_array);
+}
+
+/*******************************************************************************
+ * Global gic distributor init which will be done by the primary cpu after a
+ * cold boot. It marks out the secure SPIs, PPIs & SGIs and enables them. It
+ * then enables the secure GIC distributor interface.
+ ******************************************************************************/
+void gicv2_distif_init(void)
+{
+ unsigned int ctlr;
+
+ assert(driver_data);
+ assert(driver_data->gicd_base);
+ assert(driver_data->g0_interrupt_array);
+
+ /* Disable the distributor before going further */
+ ctlr = gicd_read_ctlr(driver_data->gicd_base);
+ gicd_write_ctlr(driver_data->gicd_base,
+ ctlr & ~(CTLR_ENABLE_G0_BIT | CTLR_ENABLE_G1_BIT));
+
+ /* Set the default attribute of all SPIs */
+ gicv2_spis_configure_defaults(driver_data->gicd_base);
+
+ /* Configure the G0 SPIs */
+ gicv2_secure_spis_configure(driver_data->gicd_base,
+ driver_data->g0_interrupt_num,
+ driver_data->g0_interrupt_array);
+
+ /* Re-enable the secure SPIs now that they have been configured */
+ gicd_write_ctlr(driver_data->gicd_base, ctlr | CTLR_ENABLE_G0_BIT);
+}
+
+/*******************************************************************************
+ * Initialize the ARM GICv2 driver with the provided platform inputs
+ ******************************************************************************/
+void gicv2_driver_init(const gicv2_driver_data_t *plat_driver_data)
+{
+ unsigned int gic_version;
+ assert(plat_driver_data);
+ assert(plat_driver_data->gicd_base);
+ assert(plat_driver_data->gicc_base);
+
+ /*
+ * The platform should provide a list of atleast one type of
+ * interrupts
+ */
+ assert(plat_driver_data->g0_interrupt_array);
+
+ /*
+ * If there are no interrupts of a particular type, then the number of
+ * interrupts of that type should be 0 and vice-versa.
+ */
+ assert(plat_driver_data->g0_interrupt_array ?
+ plat_driver_data->g0_interrupt_num :
+ plat_driver_data->g0_interrupt_num == 0);
+
+ /* Ensure that this is a GICv2 system */
+ gic_version = gicd_read_pidr2(plat_driver_data->gicd_base);
+ gic_version = (gic_version >> PIDR2_ARCH_REV_SHIFT)
+ & PIDR2_ARCH_REV_MASK;
+ assert(gic_version == ARCH_REV_GICV2);
+
+ driver_data = plat_driver_data;
+
+ INFO("ARM GICv2 driver initialized\n");
+}
+
+/******************************************************************************
+ * This function returns whether FIQ is enabled in the GIC CPU interface.
+ *****************************************************************************/
+unsigned int gicv2_is_fiq_enabled(void)
+{
+ unsigned int gicc_ctlr;
+
+ assert(driver_data);
+ assert(driver_data->gicc_base);
+
+ gicc_ctlr = gicc_read_ctlr(driver_data->gicc_base);
+ return (gicc_ctlr >> FIQ_EN_SHIFT) & 0x1;
+}
+
+/*******************************************************************************
+ * This function returns the type of the highest priority pending interrupt at
+ * the GIC cpu interface. The return values can be one of the following :
+ * PENDING_G1_INTID : The interrupt type is non secure Group 1.
+ * 0 - 1019 : The interrupt type is secure Group 0.
+ * GIC_SPURIOUS_INTERRUPT : there is no pending interrupt with
+ * sufficient priority to be signaled
+ ******************************************************************************/
+unsigned int gicv2_get_pending_interrupt_type(void)
+{
+ assert(driver_data);
+ assert(driver_data->gicc_base);
+
+ return gicc_read_hppir(driver_data->gicc_base) & INT_ID_MASK;
+}
+
+/*******************************************************************************
+ * This function returns the id of the highest priority pending interrupt at
+ * the GIC cpu interface. GIC_SPURIOUS_INTERRUPT is returned when there is no
+ * interrupt pending.
+ ******************************************************************************/
+unsigned int gicv2_get_pending_interrupt_id(void)
+{
+ unsigned int id;
+
+ assert(driver_data);
+ assert(driver_data->gicc_base);
+
+ id = gicc_read_hppir(driver_data->gicc_base) & INT_ID_MASK;
+
+ /*
+ * Find out which non-secure interrupt it is under the assumption that
+ * the GICC_CTLR.AckCtl bit is 0.
+ */
+ if (id == PENDING_G1_INTID)
+ id = gicc_read_ahppir(driver_data->gicc_base) & INT_ID_MASK;
+
+ return id;
+}
+
+/*******************************************************************************
+ * This functions reads the GIC cpu interface Interrupt Acknowledge register
+ * to start handling the pending secure 0 interrupt. It returns the
+ * contents of the IAR.
+ ******************************************************************************/
+unsigned int gicv2_acknowledge_interrupt(void)
+{
+ assert(driver_data);
+ assert(driver_data->gicc_base);
+
+ return gicc_read_IAR(driver_data->gicc_base);
+}
+
+/*******************************************************************************
+ * This functions writes the GIC cpu interface End Of Interrupt register with
+ * the passed value to finish handling the active secure group 0 interrupt.
+ ******************************************************************************/
+void gicv2_end_of_interrupt(unsigned int id)
+{
+ assert(driver_data);
+ assert(driver_data->gicc_base);
+
+ gicc_write_EOIR(driver_data->gicc_base, id);
+}
+
+/*******************************************************************************
+ * This function returns the type of the interrupt id depending upon the group
+ * this interrupt has been configured under by the interrupt controller i.e.
+ * group0 secure or group1 non secure. It returns zero for Group 0 secure and
+ * one for Group 1 non secure interrupt.
+ ******************************************************************************/
+unsigned int gicv2_get_interrupt_group(unsigned int id)
+{
+ assert(driver_data);
+ assert(driver_data->gicd_base);
+
+ return gicd_get_igroupr(driver_data->gicd_base, id);
+}
--- /dev/null
+/*
+ * Copyright (c) 2015, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __GICV2_PRIVATE_H__
+#define __GICV2_PRIVATE_H__
+
+#include <gicv2.h>
+#include <mmio.h>
+#include <stdint.h>
+
+/*******************************************************************************
+ * Private function prototypes
+ ******************************************************************************/
+void gicv2_spis_configure_defaults(uintptr_t gicd_base);
+void gicv2_secure_spis_configure(uintptr_t gicd_base,
+ unsigned int num_ints,
+ const unsigned int *sec_intr_list);
+void gicv2_secure_ppi_sgi_setup(uintptr_t gicd_base,
+ unsigned int num_ints,
+ const unsigned int *sec_intr_list);
+unsigned int gicv2_get_cpuif_id(uintptr_t base);
+
+/*******************************************************************************
+ * GIC Distributor interface accessors for reading entire registers
+ ******************************************************************************/
+static inline unsigned int gicd_read_pidr2(uintptr_t base)
+{
+ return mmio_read_32(base + GICD_PIDR2_GICV2);
+}
+
+/*******************************************************************************
+ * GIC CPU interface accessors for reading entire registers
+ ******************************************************************************/
+
+static inline unsigned int gicc_read_ctlr(uintptr_t base)
+{
+ return mmio_read_32(base + GICC_CTLR);
+}
+
+static inline unsigned int gicc_read_pmr(uintptr_t base)
+{
+ return mmio_read_32(base + GICC_PMR);
+}
+
+static inline unsigned int gicc_read_BPR(uintptr_t base)
+{
+ return mmio_read_32(base + GICC_BPR);
+}
+
+static inline unsigned int gicc_read_IAR(uintptr_t base)
+{
+ return mmio_read_32(base + GICC_IAR);
+}
+
+static inline unsigned int gicc_read_EOIR(uintptr_t base)
+{
+ return mmio_read_32(base + GICC_EOIR);
+}
+
+static inline unsigned int gicc_read_hppir(uintptr_t base)
+{
+ return mmio_read_32(base + GICC_HPPIR);
+}
+
+static inline unsigned int gicc_read_ahppir(uintptr_t base)
+{
+ return mmio_read_32(base + GICC_AHPPIR);
+}
+
+static inline unsigned int gicc_read_dir(uintptr_t base)
+{
+ return mmio_read_32(base + GICC_DIR);
+}
+
+static inline unsigned int gicc_read_iidr(uintptr_t base)
+{
+ return mmio_read_32(base + GICC_IIDR);
+}
+
+/*******************************************************************************
+ * GIC CPU interface accessors for writing entire registers
+ ******************************************************************************/
+
+static inline void gicc_write_ctlr(uintptr_t base, unsigned int val)
+{
+ mmio_write_32(base + GICC_CTLR, val);
+}
+
+static inline void gicc_write_pmr(uintptr_t base, unsigned int val)
+{
+ mmio_write_32(base + GICC_PMR, val);
+}
+
+static inline void gicc_write_BPR(uintptr_t base, unsigned int val)
+{
+ mmio_write_32(base + GICC_BPR, val);
+}
+
+
+static inline void gicc_write_IAR(uintptr_t base, unsigned int val)
+{
+ mmio_write_32(base + GICC_IAR, val);
+}
+
+static inline void gicc_write_EOIR(uintptr_t base, unsigned int val)
+{
+ mmio_write_32(base + GICC_EOIR, val);
+}
+
+static inline void gicc_write_hppir(uintptr_t base, unsigned int val)
+{
+ mmio_write_32(base + GICC_HPPIR, val);
+}
+
+static inline void gicc_write_dir(uintptr_t base, unsigned int val)
+{
+ mmio_write_32(base + GICC_DIR, val);
+}
+
+#endif /* __GICV2_PRIVATE_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2015, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __GICV2_H__
+#define __GICV2_H__
+
+/*******************************************************************************
+ * GICv2 miscellaneous definitions
+ ******************************************************************************/
+/* Interrupt IDs reported by the HPPIR and IAR registers */
+#define PENDING_G1_INTID 1022
+
+/*******************************************************************************
+ * GICv2 specific Distributor interface register offsets and constants.
+ ******************************************************************************/
+#define GICD_ITARGETSR 0x800
+#define GICD_SGIR 0xF00
+#define GICD_CPENDSGIR 0xF10
+#define GICD_SPENDSGIR 0xF20
+#define GICD_PIDR2_GICV2 0xFE8
+
+#define ITARGETSR_SHIFT 2
+#define GIC_TARGET_CPU_MASK 0xff
+
+#define CPENDSGIR_SHIFT 2
+#define SPENDSGIR_SHIFT CPENDSGIR_SHIFT
+
+/*******************************************************************************
+ * GICv2 specific CPU interface register offsets and constants.
+ ******************************************************************************/
+/* Physical CPU Interface registers */
+#define GICC_CTLR 0x0
+#define GICC_PMR 0x4
+#define GICC_BPR 0x8
+#define GICC_IAR 0xC
+#define GICC_EOIR 0x10
+#define GICC_RPR 0x14
+#define GICC_HPPIR 0x18
+#define GICC_AHPPIR 0x28
+#define GICC_IIDR 0xFC
+#define GICC_DIR 0x1000
+#define GICC_PRIODROP GICC_EOIR
+
+/* GICC_CTLR bit definitions */
+#define EOI_MODE_NS (1 << 10)
+#define EOI_MODE_S (1 << 9)
+#define IRQ_BYP_DIS_GRP1 (1 << 8)
+#define FIQ_BYP_DIS_GRP1 (1 << 7)
+#define IRQ_BYP_DIS_GRP0 (1 << 6)
+#define FIQ_BYP_DIS_GRP0 (1 << 5)
+#define CBPR (1 << 4)
+#define FIQ_EN_SHIFT 3
+#define FIQ_EN_BIT (1 << FIQ_EN_SHIFT)
+#define ACK_CTL (1 << 2)
+
+/* GICC_IIDR bit masks and shifts */
+#define GICC_IIDR_PID_SHIFT 20
+#define GICC_IIDR_ARCH_SHIFT 16
+#define GICC_IIDR_REV_SHIFT 12
+#define GICC_IIDR_IMP_SHIFT 0
+
+#define GICC_IIDR_PID_MASK 0xfff
+#define GICC_IIDR_ARCH_MASK 0xf
+#define GICC_IIDR_REV_MASK 0xf
+#define GICC_IIDR_IMP_MASK 0xfff
+
+/* HYP view virtual CPU Interface registers */
+#define GICH_CTL 0x0
+#define GICH_VTR 0x4
+#define GICH_ELRSR0 0x30
+#define GICH_ELRSR1 0x34
+#define GICH_APR0 0xF0
+#define GICH_LR_BASE 0x100
+
+/* Virtual CPU Interface registers */
+#define GICV_CTL 0x0
+#define GICV_PRIMASK 0x4
+#define GICV_BP 0x8
+#define GICV_INTACK 0xC
+#define GICV_EOI 0x10
+#define GICV_RUNNINGPRI 0x14
+#define GICV_HIGHESTPEND 0x18
+#define GICV_DEACTIVATE 0x1000
+
+/* GICD_CTLR bit definitions */
+#define CTLR_ENABLE_G1_SHIFT 1
+#define CTLR_ENABLE_G1_MASK 0x1
+#define CTLR_ENABLE_G1_BIT (1 << CTLR_ENABLE_G1_SHIFT)
+
+/* Interrupt ID mask for HPPIR, AHPPIR, IAR and AIAR CPU Interface registers */
+#define INT_ID_MASK 0x3ff
+
+#ifndef __ASSEMBLY__
+
+#include <stdint.h>
+
+/*******************************************************************************
+ * This structure describes some of the implementation defined attributes of
+ * the GICv2 IP. It is used by the platform port to specify these attributes
+ * in order to initialize the GICv2 driver. The attributes are described
+ * below.
+ *
+ * 1. The 'gicd_base' field contains the base address of the Distributor
+ * interface programmer's view.
+ *
+ * 2. The 'gicc_base' field contains the base address of the CPU Interface
+ * programmer's view.
+ *
+ * 3. The 'g0_interrupt_array' field is a pointer to an array in which each
+ * entry corresponds to an ID of a Group 0 interrupt.
+ *
+ * 4. The 'g0_interrupt_num' field contains the number of entries in the
+ * 'g0_interrupt_array'.
+ ******************************************************************************/
+typedef struct gicv2_driver_data {
+ uintptr_t gicd_base;
+ uintptr_t gicc_base;
+ unsigned int g0_interrupt_num;
+ const unsigned int *g0_interrupt_array;
+} gicv2_driver_data_t;
+
+/*******************************************************************************
+ * Function prototypes
+ ******************************************************************************/
+void gicv2_driver_init(const gicv2_driver_data_t *plat_driver_data);
+void gicv2_distif_init(void);
+void gicv2_pcpu_distif_init(void);
+void gicv2_cpuif_enable(void);
+void gicv2_cpuif_disable(void);
+unsigned int gicv2_is_fiq_enabled(void);
+unsigned int gicv2_get_pending_interrupt_type(void);
+unsigned int gicv2_get_pending_interrupt_id(void);
+unsigned int gicv2_acknowledge_interrupt(void);
+void gicv2_end_of_interrupt(unsigned int id);
+unsigned int gicv2_get_interrupt_group(unsigned int id);
+
+#endif /* __ASSEMBLY__ */
+#endif /* __GICV2_H__ */
projects / project / bcm63xx / atf.git / commitdiff