brcmfmac: replace brcmf_sdcard_cfg_read with brcmf_sdio_regrb

Use the newly introduced brcmf_sdio_regrb to replace
brcmf_sdcard_cfg_read as part of the SDIO WiFi dongle register
access interface clean up.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
index 5e719d872d59501cadc74571ab260a89cd17c891..fc5c628e76a5b3d6c45c3523586a250c5c35adbd 100644 (file)
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
@@ -85,8 +85,7 @@ int brcmf_sdio_intr_register(struct brcmf_sdio_dev *sdiodev)
        sdiodev->irq_wake = true;
 
        /* must configure SDIO_CCCR_IENx to enable irq */
-       data = brcmf_sdcard_cfg_read(sdiodev, SDIO_FUNC_0,
-                                    SDIO_CCCR_IENx, &ret);
+       data = brcmf_sdio_regrb(sdiodev, SDIO_CCCR_IENx, &ret);
        data |= 1 << SDIO_FUNC_1 | 1 << SDIO_FUNC_2 | 1;
        brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_0, SDIO_CCCR_IENx,
                               data, &ret);
@@ -158,29 +157,6 @@ int brcmf_sdio_intr_unregister(struct brcmf_sdio_dev *sdiodev)
 }
 #endif         /* CONFIG_BRCMFMAC_SDIO_OOB */
 
-u8 brcmf_sdcard_cfg_read(struct brcmf_sdio_dev *sdiodev, uint fnc_num, u32 addr,
-                        int *err)
-{
-       int status;
-       s32 retry = 0;
-       u8 data = 0;
-
-       do {
-               if (retry)      /* wait for 1 ms till bus get settled down */
-                       udelay(1000);
-               status = brcmf_sdioh_request_byte(sdiodev, SDIOH_READ, fnc_num,
-                                                 addr, (u8 *) &data);
-       } while (status != 0
-                && (retry++ < SDIOH_API_ACCESS_RETRY_LIMIT));
-       if (err)
-               *err = status;
-
-       brcmf_dbg(INFO, "fun = %d, addr = 0x%x, u8data = 0x%x\n",
-                 fnc_num, addr, data);
-
-       return data;
-}
-
 void
 brcmf_sdcard_cfg_write(struct brcmf_sdio_dev *sdiodev, uint fnc_num, u32 addr,
                       u8 data, int *err)

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index 7ed215d5a891d2da46cea9e5a99810373a4d2154..85f277c2efab34d6dbedee3380ce5268830bbcbc 100644 (file)
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -704,8 +704,8 @@ static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok)
                }
 
                /* Check current status */
-               clkctl = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1,
-                                              SBSDIO_FUNC1_CHIPCLKCSR, &err);
+               clkctl = brcmf_sdio_regrb(bus->sdiodev,
+                                         SBSDIO_FUNC1_CHIPCLKCSR, &err);
                if (err) {
                        brcmf_dbg(ERROR, "HT Avail read error: %d\n", err);
                        return -EBADE;
@@ -714,9 +714,8 @@ static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok)
                /* Go to pending and await interrupt if appropriate */
                if (!SBSDIO_CLKAV(clkctl, bus->alp_only) && pendok) {
                        /* Allow only clock-available interrupt */
-                       devctl = brcmf_sdcard_cfg_read(bus->sdiodev,
-                                       SDIO_FUNC_1,
-                                       SBSDIO_DEVICE_CTL, &err);
+                       devctl = brcmf_sdio_regrb(bus->sdiodev,
+                                                 SBSDIO_DEVICE_CTL, &err);
                        if (err) {
                                brcmf_dbg(ERROR, "Devctl error setting CA: %d\n",
                                          err);
@@ -732,8 +731,7 @@ static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok)
                        return 0;
                } else if (bus->clkstate == CLK_PENDING) {
                        /* Cancel CA-only interrupt filter */
-                       devctl =
-                           brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1,
+                       devctl = brcmf_sdio_regrb(bus->sdiodev,
                                                  SBSDIO_DEVICE_CTL, &err);
                        devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY;
                        brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
@@ -744,10 +742,9 @@ static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok)
                timeout = jiffies +
                          msecs_to_jiffies(PMU_MAX_TRANSITION_DLY/1000);
                while (!SBSDIO_CLKAV(clkctl, bus->alp_only)) {
-                       clkctl = brcmf_sdcard_cfg_read(bus->sdiodev,
-                                                      SDIO_FUNC_1,
-                                                      SBSDIO_FUNC1_CHIPCLKCSR,
-                                                      &err);
+                       clkctl = brcmf_sdio_regrb(bus->sdiodev,
+                                                 SBSDIO_FUNC1_CHIPCLKCSR,
+                                                 &err);
                        if (time_after(jiffies, timeout))
                                break;
                        else
@@ -780,9 +777,8 @@ static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok)
 
                if (bus->clkstate == CLK_PENDING) {
                        /* Cancel CA-only interrupt filter */
-                       devctl = brcmf_sdcard_cfg_read(bus->sdiodev,
-                                       SDIO_FUNC_1,
-                                       SBSDIO_DEVICE_CTL, &err);
+                       devctl = brcmf_sdio_regrb(bus->sdiodev,
+                                                 SBSDIO_DEVICE_CTL, &err);
                        devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY;
                        brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
                                SBSDIO_DEVICE_CTL, devctl, &err);
@@ -1046,10 +1042,10 @@ static void brcmf_sdbrcm_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx)
 
        /* Wait until the packet has been flushed (device/FIFO stable) */
        for (lastrbc = retries = 0xffff; retries > 0; retries--) {
-               hi = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1,
-                                          SBSDIO_FUNC1_RFRAMEBCHI, NULL);
-               lo = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1,
-                                          SBSDIO_FUNC1_RFRAMEBCLO, NULL);
+               hi = brcmf_sdio_regrb(bus->sdiodev,
+                                     SBSDIO_FUNC1_RFRAMEBCHI, NULL);
+               lo = brcmf_sdio_regrb(bus->sdiodev,
+                                     SBSDIO_FUNC1_RFRAMEBCLO, NULL);
                bus->f1regdata += 2;
 
                if ((hi == 0) && (lo == 0))
@@ -2184,14 +2180,10 @@ static int brcmf_sdbrcm_txpkt(struct brcmf_sdio *bus, struct sk_buff *pkt,
 
                for (i = 0; i < 3; i++) {
                        u8 hi, lo;
-                       hi = brcmf_sdcard_cfg_read(bus->sdiodev,
-                                            SDIO_FUNC_1,
-                                            SBSDIO_FUNC1_WFRAMEBCHI,
-                                            NULL);
-                       lo = brcmf_sdcard_cfg_read(bus->sdiodev,
-                                            SDIO_FUNC_1,
-                                            SBSDIO_FUNC1_WFRAMEBCLO,
-                                            NULL);
+                       hi = brcmf_sdio_regrb(bus->sdiodev,
+                                             SBSDIO_FUNC1_WFRAMEBCHI, NULL);
+                       lo = brcmf_sdio_regrb(bus->sdiodev,
+                                             SBSDIO_FUNC1_WFRAMEBCLO, NULL);
                        bus->f1regdata += 2;
                        if ((hi == 0) && (lo == 0))
                                break;
@@ -2310,8 +2302,8 @@ static void brcmf_sdbrcm_bus_stop(struct device *dev)
        bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
 
        /* Force clocks on backplane to be sure F2 interrupt propagates */
-       saveclk = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1,
-                                       SBSDIO_FUNC1_CHIPCLKCSR, &err);
+       saveclk = brcmf_sdio_regrb(bus->sdiodev,
+                                  SBSDIO_FUNC1_CHIPCLKCSR, &err);
        if (!err) {
                brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
                                       SBSDIO_FUNC1_CHIPCLKCSR,
@@ -2393,8 +2385,8 @@ static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus)
 
 #ifdef DEBUG
                /* Check for inconsistent device control */
-               devctl = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1,
-                                              SBSDIO_DEVICE_CTL, &err);
+               devctl = brcmf_sdio_regrb(bus->sdiodev,
+                                         SBSDIO_DEVICE_CTL, &err);
                if (err) {
                        brcmf_dbg(ERROR, "error reading DEVCTL: %d\n", err);
                        bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
@@ -2402,8 +2394,8 @@ static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus)
 #endif                         /* DEBUG */
 
                /* Read CSR, if clock on switch to AVAIL, else ignore */
-               clkctl = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1,
-                                              SBSDIO_FUNC1_CHIPCLKCSR, &err);
+               clkctl = brcmf_sdio_regrb(bus->sdiodev,
+                                         SBSDIO_FUNC1_CHIPCLKCSR, &err);
                if (err) {
                        brcmf_dbg(ERROR, "error reading CSR: %d\n",
                                  err);
@@ -2414,9 +2406,8 @@ static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus)
                          devctl, clkctl);
 
                if (SBSDIO_HTAV(clkctl)) {
-                       devctl = brcmf_sdcard_cfg_read(bus->sdiodev,
-                                                      SDIO_FUNC_1,
-                                                      SBSDIO_DEVICE_CTL, &err);
+                       devctl = brcmf_sdio_regrb(bus->sdiodev,
+                                                 SBSDIO_DEVICE_CTL, &err);
                        if (err) {
                                brcmf_dbg(ERROR, "error reading DEVCTL: %d\n",
                                          err);
@@ -2552,14 +2543,12 @@ clkwait:
 
                        for (i = 0; i < 3; i++) {
                                u8 hi, lo;
-                               hi = brcmf_sdcard_cfg_read(bus->sdiodev,
-                                                    SDIO_FUNC_1,
-                                                    SBSDIO_FUNC1_WFRAMEBCHI,
-                                                    NULL);
-                               lo = brcmf_sdcard_cfg_read(bus->sdiodev,
-                                                    SDIO_FUNC_1,
-                                                    SBSDIO_FUNC1_WFRAMEBCLO,
-                                                    NULL);
+                               hi = brcmf_sdio_regrb(bus->sdiodev,
+                                                     SBSDIO_FUNC1_WFRAMEBCHI,
+                                                     NULL);
+                               lo = brcmf_sdio_regrb(bus->sdiodev,
+                                                     SBSDIO_FUNC1_WFRAMEBCLO,
+                                                     NULL);
                                bus->f1regdata += 2;
                                if ((hi == 0) && (lo == 0))
                                        break;
@@ -2892,12 +2881,10 @@ static int brcmf_tx_frame(struct brcmf_sdio *bus, u8 *frame, u16 len)
 
                for (i = 0; i < 3; i++) {
                        u8 hi, lo;
-                       hi = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1,
-                                                  SBSDIO_FUNC1_WFRAMEBCHI,
-                                                  NULL);
-                       lo = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1,
-                                                  SBSDIO_FUNC1_WFRAMEBCLO,
-                                                  NULL);
+                       hi = brcmf_sdio_regrb(bus->sdiodev,
+                                             SBSDIO_FUNC1_WFRAMEBCHI, NULL);
+                       lo = brcmf_sdio_regrb(bus->sdiodev,
+                                             SBSDIO_FUNC1_WFRAMEBCLO, NULL);
                        bus->f1regdata += 2;
                        if (hi == 0 && lo == 0)
                                break;
@@ -3471,9 +3458,8 @@ static int brcmf_sdbrcm_bus_init(struct device *dev)
                goto exit;
 
        /* Force clocks on backplane to be sure F2 interrupt propagates */
-       saveclk =
-           brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1,
-                                 SBSDIO_FUNC1_CHIPCLKCSR, &err);
+       saveclk = brcmf_sdio_regrb(bus->sdiodev,
+                                  SBSDIO_FUNC1_CHIPCLKCSR, &err);
        if (!err) {
                brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
                                       SBSDIO_FUNC1_CHIPCLKCSR,
@@ -3495,8 +3481,8 @@ static int brcmf_sdbrcm_bus_init(struct device *dev)
        timeout = jiffies + msecs_to_jiffies(BRCMF_WAIT_F2RDY);
        ready = 0;
        while (enable != ready) {
-               ready = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_0,
-                                             SDIO_CCCR_IORx, NULL);
+               ready = brcmf_sdio_regrb(bus->sdiodev,
+                                        SDIO_CCCR_IORx, NULL);
                if (time_after(jiffies, timeout))
                        break;
                else if (time_after(jiffies, timeout - BRCMF_WAIT_F2RDY + 50))
@@ -3605,9 +3591,9 @@ static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_sdio *bus)
 
                        if (!bus->dpc_sched) {
                                u8 devpend;
-                               devpend = brcmf_sdcard_cfg_read(bus->sdiodev,
-                                               SDIO_FUNC_0, SDIO_CCCR_INTx,
-                                               NULL);
+                               devpend = brcmf_sdio_regrb(bus->sdiodev,
+                                                          SDIO_CCCR_INTx,
+                                                          NULL);
                                intstatus =
                                    devpend & (INTR_STATUS_FUNC1 |
                                               INTR_STATUS_FUNC2);
@@ -3747,8 +3733,7 @@ brcmf_sdbrcm_probe_attach(struct brcmf_sdio *bus, u32 regsva)
                               SBSDIO_FUNC1_CHIPCLKCSR,
                               BRCMF_INIT_CLKCTL1, &err);
        if (!err)
-               clkctl =
-                   brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1,
+               clkctl = brcmf_sdio_regrb(bus->sdiodev,
                                          SBSDIO_FUNC1_CHIPCLKCSR, &err);
 
        if (err || ((clkctl & ~SBSDIO_AVBITS) != BRCMF_INIT_CLKCTL1)) {

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c
index 3ced61380d9990722fdb84851d5c078a6d184f99..654b7e032b273774b51cdd20e7f885c5232e6af7 100644 (file)
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c
@@ -434,8 +434,8 @@ brcmf_sdio_chip_buscoreprep(struct brcmf_sdio_dev *sdiodev)
 
        /* If register supported, wait for ALPAvail and then force ALP */
        /* This may take up to 15 milliseconds */
-       clkval = brcmf_sdcard_cfg_read(sdiodev, SDIO_FUNC_1,
-                                      SBSDIO_FUNC1_CHIPCLKCSR, NULL);
+       clkval = brcmf_sdio_regrb(sdiodev,
+                                 SBSDIO_FUNC1_CHIPCLKCSR, NULL);
 
        if ((clkval & ~SBSDIO_AVBITS) != clkset) {
                brcmf_dbg(ERROR, "ChipClkCSR access: wrote 0x%02x read 0x%02x\n",
@@ -443,8 +443,8 @@ brcmf_sdio_chip_buscoreprep(struct brcmf_sdio_dev *sdiodev)
                return -EACCES;
        }
 
-       SPINWAIT(((clkval = brcmf_sdcard_cfg_read(sdiodev, SDIO_FUNC_1,
-                               SBSDIO_FUNC1_CHIPCLKCSR, NULL)),
+       SPINWAIT(((clkval = brcmf_sdio_regrb(sdiodev,
+                                            SBSDIO_FUNC1_CHIPCLKCSR, NULL)),
                        !SBSDIO_ALPAV(clkval)),
                        PMU_MAX_TRANSITION_DLY);
        if (!SBSDIO_ALPAV(clkval)) {

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
index d6ed2d84d0fb0cfe86f0d72af20e1fe571c0d372..decfe0d14bad788b8814d63b939ccf54c7a9aeeb 100644 (file)
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
@@ -174,8 +174,6 @@ extern int brcmf_sdio_intr_unregister(struct brcmf_sdio_dev *sdiodev);
  *   data: data byte to write
  *   err:  pointer to error code (or NULL)
  */
-extern u8 brcmf_sdcard_cfg_read(struct brcmf_sdio_dev *sdiodev, uint func,
-                               u32 addr, int *err);
 extern void brcmf_sdcard_cfg_write(struct brcmf_sdio_dev *sdiodev, uint func,
                                   u32 addr, u8 data, int *err);