--- /dev/null
+/*
+ * Copyright (C) 2015 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Based on code from the coreboot file of the same name
+ */
+
+#include <common.h>
+#include <cpu.h>
+#include <dm.h>
+#include <errno.h>
+#include <malloc.h>
+#include <asm/atomic.h>
+#include <asm/cpu.h>
+#include <asm/interrupt.h>
+#include <asm/lapic.h>
+#include <asm/mp.h>
+#include <asm/mtrr.h>
+#include <asm/sipi.h>
+#include <dm/device-internal.h>
+#include <dm/uclass-internal.h>
+#include <linux/linkage.h>
+
+/* This also needs to match the sipi.S assembly code for saved MSR encoding */
+struct saved_msr {
+ uint32_t index;
+ uint32_t lo;
+ uint32_t hi;
+} __packed;
+
+
+struct mp_flight_plan {
+ int num_records;
+ struct mp_flight_record *records;
+};
+
+static struct mp_flight_plan mp_info;
+
+struct cpu_map {
+ struct udevice *dev;
+ int apic_id;
+ int err_code;
+};
+
+static inline void barrier_wait(atomic_t *b)
+{
+ while (atomic_read(b) == 0)
+ asm("pause");
+ mfence();
+}
+
+static inline void release_barrier(atomic_t *b)
+{
+ mfence();
+ atomic_set(b, 1);
+}
+
+/* Returns 1 if timeout waiting for APs. 0 if target APs found */
+static int wait_for_aps(atomic_t *val, int target, int total_delay,
+ int delay_step)
+{
+ int timeout = 0;
+ int delayed = 0;
+
+ while (atomic_read(val) != target) {
+ udelay(delay_step);
+ delayed += delay_step;
+ if (delayed >= total_delay) {
+ timeout = 1;
+ break;
+ }
+ }
+
+ return timeout;
+}
+
+static void ap_do_flight_plan(struct udevice *cpu)
+{
+ int i;
+
+ for (i = 0; i < mp_info.num_records; i++) {
+ struct mp_flight_record *rec = &mp_info.records[i];
+
+ atomic_inc(&rec->cpus_entered);
+ barrier_wait(&rec->barrier);
+
+ if (rec->ap_call != NULL)
+ rec->ap_call(cpu, rec->ap_arg);
+ }
+}
+
+static int find_cpu_by_apid_id(int apic_id, struct udevice **devp)
+{
+ struct udevice *dev;
+
+ *devp = NULL;
+ for (uclass_find_first_device(UCLASS_CPU, &dev);
+ dev;
+ uclass_find_next_device(&dev)) {
+ struct cpu_platdata *plat = dev_get_parent_platdata(dev);
+
+ if (plat->cpu_id == apic_id) {
+ *devp = dev;
+ return 0;
+ }
+ }
+
+ return -ENOENT;
+}
+
+/*
+ * By the time APs call ap_init() caching has been setup, and microcode has
+ * been loaded
+ */
+static void ap_init(unsigned int cpu_index)
+{
+ struct udevice *dev;
+ int apic_id;
+ int ret;
+
+ /* Ensure the local apic is enabled */
+ enable_lapic();
+
+ apic_id = lapicid();
+ ret = find_cpu_by_apid_id(apic_id, &dev);
+ if (ret) {
+ debug("Unknown CPU apic_id %x\n", apic_id);
+ goto done;
+ }
+
+ debug("AP: slot %d apic_id %x, dev %s\n", cpu_index, apic_id,
+ dev ? dev->name : "(apic_id not found)");
+
+ /* Walk the flight plan */
+ ap_do_flight_plan(dev);
+
+ /* Park the AP */
+ debug("parking\n");
+done:
+ stop_this_cpu();
+}
+
+static const unsigned int fixed_mtrrs[NUM_FIXED_MTRRS] = {
+ MTRR_FIX_64K_00000_MSR, MTRR_FIX_16K_80000_MSR, MTRR_FIX_16K_A0000_MSR,
+ MTRR_FIX_4K_C0000_MSR, MTRR_FIX_4K_C8000_MSR, MTRR_FIX_4K_D0000_MSR,
+ MTRR_FIX_4K_D8000_MSR, MTRR_FIX_4K_E0000_MSR, MTRR_FIX_4K_E8000_MSR,
+ MTRR_FIX_4K_F0000_MSR, MTRR_FIX_4K_F8000_MSR,
+};
+
+static inline struct saved_msr *save_msr(int index, struct saved_msr *entry)
+{
+ msr_t msr;
+
+ msr = msr_read(index);
+ entry->index = index;
+ entry->lo = msr.lo;
+ entry->hi = msr.hi;
+
+ /* Return the next entry */
+ entry++;
+ return entry;
+}
+
+static int save_bsp_msrs(char *start, int size)
+{
+ int msr_count;
+ int num_var_mtrrs;
+ struct saved_msr *msr_entry;
+ int i;
+ msr_t msr;
+
+ /* Determine number of MTRRs need to be saved */
+ msr = msr_read(MTRR_CAP_MSR);
+ num_var_mtrrs = msr.lo & 0xff;
+
+ /* 2 * num_var_mtrrs for base and mask. +1 for IA32_MTRR_DEF_TYPE */
+ msr_count = 2 * num_var_mtrrs + NUM_FIXED_MTRRS + 1;
+
+ if ((msr_count * sizeof(struct saved_msr)) > size) {
+ printf("Cannot mirror all %d msrs.\n", msr_count);
+ return -ENOSPC;
+ }
+
+ msr_entry = (void *)start;
+ for (i = 0; i < NUM_FIXED_MTRRS; i++)
+ msr_entry = save_msr(fixed_mtrrs[i], msr_entry);
+
+ for (i = 0; i < num_var_mtrrs; i++) {
+ msr_entry = save_msr(MTRR_PHYS_BASE_MSR(i), msr_entry);
+ msr_entry = save_msr(MTRR_PHYS_MASK_MSR(i), msr_entry);
+ }
+
+ msr_entry = save_msr(MTRR_DEF_TYPE_MSR, msr_entry);
+
+ return msr_count;
+}
+
+static int load_sipi_vector(atomic_t **ap_countp)
+{
+ struct sipi_params_16bit *params16;
+ struct sipi_params *params;
+ static char msr_save[512];
+ char *stack;
+ ulong addr;
+ int code_len;
+ int size;
+ int ret;
+
+ /* Copy in the code */
+ code_len = ap_start16_code_end - ap_start16;
+ debug("Copying SIPI code to %x: %d bytes\n", AP_DEFAULT_BASE,
+ code_len);
+ memcpy((void *)AP_DEFAULT_BASE, ap_start16, code_len);
+
+ addr = AP_DEFAULT_BASE + (ulong)sipi_params_16bit - (ulong)ap_start16;
+ params16 = (struct sipi_params_16bit *)addr;
+ params16->ap_start = (uint32_t)ap_start;
+ params16->gdt = (uint32_t)gd->arch.gdt;
+ params16->gdt_limit = X86_GDT_SIZE - 1;
+ debug("gdt = %x, gdt_limit = %x\n", params16->gdt, params16->gdt_limit);
+
+ params = (struct sipi_params *)sipi_params;
+ debug("SIPI 32-bit params at %p\n", params);
+ params->idt_ptr = (uint32_t)x86_get_idt();
+
+ params->stack_size = CONFIG_AP_STACK_SIZE;
+ size = params->stack_size * CONFIG_MAX_CPUS;
+ stack = memalign(size, 4096);
+ if (!stack)
+ return -ENOMEM;
+ params->stack_top = (u32)(stack + size);
+
+ params->microcode_ptr = 0;
+ params->msr_table_ptr = (u32)msr_save;
+ ret = save_bsp_msrs(msr_save, sizeof(msr_save));
+ if (ret < 0)
+ return ret;
+ params->msr_count = ret;
+
+ params->c_handler = (uint32_t)&ap_init;
+
+ *ap_countp = ¶ms->ap_count;
+ atomic_set(*ap_countp, 0);
+ debug("SIPI vector is ready\n");
+
+ return 0;
+}
+
+static int check_cpu_devices(int expected_cpus)
+{
+ int i;
+
+ for (i = 0; i < expected_cpus; i++) {
+ struct udevice *dev;
+ int ret;
+
+ ret = uclass_find_device(UCLASS_CPU, i, &dev);
+ if (ret) {
+ debug("Cannot find CPU %d in device tree\n", i);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+/* Returns 1 for timeout. 0 on success */
+static int apic_wait_timeout(int total_delay, int delay_step)
+{
+ int total = 0;
+ int timeout = 0;
+
+ while (lapic_read(LAPIC_ICR) & LAPIC_ICR_BUSY) {
+ udelay(delay_step);
+ total += delay_step;
+ if (total >= total_delay) {
+ timeout = 1;
+ break;
+ }
+ }
+
+ return timeout;
+}
+
+static int start_aps(int ap_count, atomic_t *num_aps)
+{
+ int sipi_vector;
+ /* Max location is 4KiB below 1MiB */
+ const int max_vector_loc = ((1 << 20) - (1 << 12)) >> 12;
+
+ if (ap_count == 0)
+ return 0;
+
+ /* The vector is sent as a 4k aligned address in one byte */
+ sipi_vector = AP_DEFAULT_BASE >> 12;
+
+ if (sipi_vector > max_vector_loc) {
+ printf("SIPI vector too large! 0x%08x\n",
+ sipi_vector);
+ return -1;
+ }
+
+ debug("Attempting to start %d APs\n", ap_count);
+
+ if ((lapic_read(LAPIC_ICR) & LAPIC_ICR_BUSY)) {
+ debug("Waiting for ICR not to be busy...");
+ if (apic_wait_timeout(1000, 50)) {
+ debug("timed out. Aborting.\n");
+ return -1;
+ } else {
+ debug("done.\n");
+ }
+ }
+
+ /* Send INIT IPI to all but self */
+ lapic_write_around(LAPIC_ICR2, SET_LAPIC_DEST_FIELD(0));
+ lapic_write_around(LAPIC_ICR, LAPIC_DEST_ALLBUT | LAPIC_INT_ASSERT |
+ LAPIC_DM_INIT);
+ debug("Waiting for 10ms after sending INIT.\n");
+ mdelay(10);
+
+ /* Send 1st SIPI */
+ if ((lapic_read(LAPIC_ICR) & LAPIC_ICR_BUSY)) {
+ debug("Waiting for ICR not to be busy...");
+ if (apic_wait_timeout(1000, 50)) {
+ debug("timed out. Aborting.\n");
+ return -1;
+ } else {
+ debug("done.\n");
+ }
+ }
+
+ lapic_write_around(LAPIC_ICR2, SET_LAPIC_DEST_FIELD(0));
+ lapic_write_around(LAPIC_ICR, LAPIC_DEST_ALLBUT | LAPIC_INT_ASSERT |
+ LAPIC_DM_STARTUP | sipi_vector);
+ debug("Waiting for 1st SIPI to complete...");
+ if (apic_wait_timeout(10000, 50)) {
+ debug("timed out.\n");
+ return -1;
+ } else {
+ debug("done.\n");
+ }
+
+ /* Wait for CPUs to check in up to 200 us */
+ wait_for_aps(num_aps, ap_count, 200, 15);
+
+ /* Send 2nd SIPI */
+ if ((lapic_read(LAPIC_ICR) & LAPIC_ICR_BUSY)) {
+ debug("Waiting for ICR not to be busy...");
+ if (apic_wait_timeout(1000, 50)) {
+ debug("timed out. Aborting.\n");
+ return -1;
+ } else {
+ debug("done.\n");
+ }
+ }
+
+ lapic_write_around(LAPIC_ICR2, SET_LAPIC_DEST_FIELD(0));
+ lapic_write_around(LAPIC_ICR, LAPIC_DEST_ALLBUT | LAPIC_INT_ASSERT |
+ LAPIC_DM_STARTUP | sipi_vector);
+ debug("Waiting for 2nd SIPI to complete...");
+ if (apic_wait_timeout(10000, 50)) {
+ debug("timed out.\n");
+ return -1;
+ } else {
+ debug("done.\n");
+ }
+
+ /* Wait for CPUs to check in */
+ if (wait_for_aps(num_aps, ap_count, 10000, 50)) {
+ debug("Not all APs checked in: %d/%d.\n",
+ atomic_read(num_aps), ap_count);
+ return -1;
+ }
+
+ return 0;
+}
+
+static int bsp_do_flight_plan(struct udevice *cpu, struct mp_params *mp_params)
+{
+ int i;
+ int ret = 0;
+ const int timeout_us = 100000;
+ const int step_us = 100;
+ int num_aps = mp_params->num_cpus - 1;
+
+ for (i = 0; i < mp_params->num_records; i++) {
+ struct mp_flight_record *rec = &mp_params->flight_plan[i];
+
+ /* Wait for APs if the record is not released */
+ if (atomic_read(&rec->barrier) == 0) {
+ /* Wait for the APs to check in */
+ if (wait_for_aps(&rec->cpus_entered, num_aps,
+ timeout_us, step_us)) {
+ debug("MP record %d timeout.\n", i);
+ ret = -1;
+ }
+ }
+
+ if (rec->bsp_call != NULL)
+ rec->bsp_call(cpu, rec->bsp_arg);
+
+ release_barrier(&rec->barrier);
+ }
+ return ret;
+}
+
+static int init_bsp(struct udevice **devp)
+{
+ char processor_name[CPU_MAX_NAME_LEN];
+ int apic_id;
+ int ret;
+
+ cpu_get_name(processor_name);
+ debug("CPU: %s.\n", processor_name);
+
+ enable_lapic();
+
+ apic_id = lapicid();
+ ret = find_cpu_by_apid_id(apic_id, devp);
+ if (ret) {
+ printf("Cannot find boot CPU, APIC ID %d\n", apic_id);
+ return ret;
+ }
+
+ return 0;
+}
+
+int mp_init(struct mp_params *p)
+{
+ int num_aps;
+ atomic_t *ap_count;
+ struct udevice *cpu;
+ int ret;
+
+ /* This will cause the CPUs devices to be bound */
+ struct uclass *uc;
+ ret = uclass_get(UCLASS_CPU, &uc);
+ if (ret)
+ return ret;
+
+ ret = init_bsp(&cpu);
+ if (ret) {
+ debug("Cannot init boot CPU: err=%d\n", ret);
+ return ret;
+ }
+
+ if (p == NULL || p->flight_plan == NULL || p->num_records < 1) {
+ printf("Invalid MP parameters\n");
+ return -1;
+ }
+
+ ret = check_cpu_devices(p->num_cpus);
+ if (ret)
+ debug("Warning: Device tree does not describe all CPUs. Extra ones will not be started correctly\n");
+
+ /* Copy needed parameters so that APs have a reference to the plan */
+ mp_info.num_records = p->num_records;
+ mp_info.records = p->flight_plan;
+
+ /* Load the SIPI vector */
+ ret = load_sipi_vector(&ap_count);
+ if (ap_count == NULL)
+ return -1;
+
+ /*
+ * Make sure SIPI data hits RAM so the APs that come up will see
+ * the startup code even if the caches are disabled
+ */
+ wbinvd();
+
+ /* Start the APs providing number of APs and the cpus_entered field */
+ num_aps = p->num_cpus - 1;
+ ret = start_aps(num_aps, ap_count);
+ if (ret) {
+ mdelay(1000);
+ debug("%d/%d eventually checked in?\n", atomic_read(ap_count),
+ num_aps);
+ return ret;
+ }
+
+ /* Walk the flight plan for the BSP */
+ ret = bsp_do_flight_plan(cpu, p);
+ if (ret) {
+ debug("CPU init failed: err=%d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+int mp_init_cpu(struct udevice *cpu, void *unused)
+{
+ return device_probe(cpu);
+}
--- /dev/null
+/*
+ * Copyright (c) 2015 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ *
+ * Taken from coreboot file of the same name
+ */
+
+/*
+ * The SIPI vector is responsible for initializing the APs in the sytem. It
+ * loads microcode, sets up MSRs, and enables caching before calling into
+ * C code
+ */
+
+#include <asm/global_data.h>
+#include <asm/msr-index.h>
+#include <asm/processor.h>
+#include <asm/processor-flags.h>
+#include <asm/sipi.h>
+
+#define CODE_SEG (X86_GDT_ENTRY_32BIT_CS * X86_GDT_ENTRY_SIZE)
+#define DATA_SEG (X86_GDT_ENTRY_32BIT_DS * X86_GDT_ENTRY_SIZE)
+
+/*
+ * First we have the 16-bit section. Every AP process starts here.
+ * The simple task is to load U-Boot's Global Descriptor Table (GDT) to allow
+ * U-Boot's 32-bit code to become visible, then jump to ap_start.
+ *
+ * Note that this code is copied to RAM below 1MB in mp_init.c, and runs from
+ * there, but the 32-bit code (ap_start and onwards) is part of U-Boot and
+ * is therefore relocated to the top of RAM with other U-Boot code. This
+ * means that for the 16-bit code we must write relocatable code, but for the
+ * rest, we can do what we like.
+ */
+.text
+.code16
+.globl ap_start16
+ap_start16:
+ cli
+ xorl %eax, %eax
+ movl %eax, %cr3 /* Invalidate TLB */
+
+ /* setup the data segment */
+ movw %cs, %ax
+ movw %ax, %ds
+
+ /* Use an address relative to the data segment for the GDT */
+ movl $gdtaddr, %ebx
+ subl $ap_start16, %ebx
+
+ data32 lgdt (%ebx)
+
+ movl %cr0, %eax
+ andl $(~(X86_CR0_PG | X86_CR0_AM | X86_CR0_WP | X86_CR0_NE | \
+ X86_CR0_TS | X86_CR0_EM | X86_CR0_MP)), %eax
+ orl $(X86_CR0_NW | X86_CR0_CD | X86_CR0_PE), %eax
+ movl %eax, %cr0
+
+ movl $ap_start_jmp, %eax
+ subl $ap_start16, %eax
+ movw %ax, %bp
+
+ /* Jump to ap_start within U-Boot */
+data32 cs ljmp *(%bp)
+
+ .align 4
+.globl sipi_params_16bit
+sipi_params_16bit:
+ /* 48-bit far pointer */
+ap_start_jmp:
+ .long 0 /* offset set to ap_start by U-Boot */
+ .word CODE_SEG /* segment */
+
+ .word 0 /* padding */
+gdtaddr:
+ .word 0 /* limit */
+ .long 0 /* table */
+ .word 0 /* unused */
+
+.globl ap_start16_code_end
+ap_start16_code_end:
+
+/*
+ * Set up the special 'fs' segment for global_data. Then jump to ap_continue
+ * to set up the AP.
+ */
+.globl ap_start
+ap_start:
+ .code32
+ movw $DATA_SEG, %ax
+ movw %ax, %ds
+ movw %ax, %es
+ movw %ax, %ss
+ movw %ax, %gs
+
+ movw $(X86_GDT_ENTRY_32BIT_FS * X86_GDT_ENTRY_SIZE), %ax
+ movw %ax, %fs
+
+ /* Load the Interrupt descriptor table */
+ mov idt_ptr, %ebx
+ lidt (%ebx)
+
+ /* Obtain cpu number */
+ movl ap_count, %eax
+1:
+ movl %eax, %ecx
+ inc %ecx
+ lock cmpxchg %ecx, ap_count
+ jnz 1b
+
+ /* Setup stacks for each CPU */
+ movl stack_size, %eax
+ mul %ecx
+ movl stack_top, %edx
+ subl %eax, %edx
+ mov %edx, %esp
+ /* Save cpu number */
+ mov %ecx, %esi
+
+ /* Determine if one should check microcode versions */
+ mov microcode_ptr, %edi
+ test %edi, %edi
+ jz microcode_done /* Bypass if no microde exists */
+
+ /* Get the Microcode version */
+ mov $1, %eax
+ cpuid
+ mov $MSR_IA32_UCODE_REV, %ecx
+ rdmsr
+ /* If something already loaded skip loading again */
+ test %edx, %edx
+ jnz microcode_done
+
+ /* Determine if parallel microcode loading is allowed */
+ cmp $0xffffffff, microcode_lock
+ je load_microcode
+
+ /* Protect microcode loading */
+lock_microcode:
+ lock bts $0, microcode_lock
+ jc lock_microcode
+
+load_microcode:
+ /* Load new microcode */
+ mov $MSR_IA32_UCODE_WRITE, %ecx
+ xor %edx, %edx
+ mov %edi, %eax
+ /*
+ * The microcode pointer is passed in pointing to the header. Adjust
+ * pointer to reflect the payload (header size is 48 bytes)
+ */
+ add $UCODE_HEADER_LEN, %eax
+ pusha
+ wrmsr
+ popa
+
+ /* Unconditionally unlock microcode loading */
+ cmp $0xffffffff, microcode_lock
+ je microcode_done
+
+ xor %eax, %eax
+ mov %eax, microcode_lock
+
+microcode_done:
+ /*
+ * Load MSRs. Each entry in the table consists of:
+ * 0: index,
+ * 4: value[31:0]
+ * 8: value[63:32]
+ * See struct saved_msr in mp_init.c.
+ */
+ mov msr_table_ptr, %edi
+ mov msr_count, %ebx
+ test %ebx, %ebx
+ jz 1f
+load_msr:
+ mov (%edi), %ecx
+ mov 4(%edi), %eax
+ mov 8(%edi), %edx
+ wrmsr
+ add $12, %edi
+ dec %ebx
+ jnz load_msr
+
+1:
+ /* Enable caching */
+ mov %cr0, %eax
+ andl $(~(X86_CR0_CD | X86_CR0_NW)), %eax
+ mov %eax, %cr0
+
+ /* c_handler(cpu_num) */
+ movl %esi, %eax /* cpu_num */
+ mov c_handler, %eax
+ call *%eax
+
+ .align 4
+.globl sipi_params
+sipi_params:
+idt_ptr:
+ .long 0
+stack_top:
+ .long 0
+stack_size:
+ .long 0
+microcode_lock:
+ .long 0
+microcode_ptr:
+ .long 0
+msr_table_ptr:
+ .long 0
+msr_count:
+ .long 0
+c_handler:
+ .long 0
+ap_count:
+ .long 0
--- /dev/null
+/*
+ * Copyright (c) 2015 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ *
+ * Taken from coreboot file of the same name
+ */
+
+#ifndef _X86_MP_H_
+#define _X86_MP_H_
+
+#include <asm/atomic.h>
+
+typedef int (*mp_callback_t)(struct udevice *cpu, void *arg);
+
+/*
+ * A mp_flight_record details a sequence of calls for the APs to perform
+ * along with the BSP to coordinate sequencing. Each flight record either
+ * provides a barrier for each AP before calling the callback or the APs
+ * are allowed to perform the callback without waiting. Regardless, each
+ * record has the cpus_entered field incremented for each record. When
+ * the BSP observes that the cpus_entered matches the number of APs
+ * the bsp_call is called with bsp_arg and upon returning releases the
+ * barrier allowing the APs to make further progress.
+ *
+ * Note that ap_call() and bsp_call() can be NULL. In the NULL case the
+ * callback will just not be called.
+ */
+struct mp_flight_record {
+ atomic_t barrier;
+ atomic_t cpus_entered;
+ mp_callback_t ap_call;
+ void *ap_arg;
+ mp_callback_t bsp_call;
+ void *bsp_arg;
+} __attribute__((aligned(ARCH_DMA_MINALIGN)));
+
+#define MP_FLIGHT_RECORD(barrier_, ap_func_, ap_arg_, bsp_func_, bsp_arg_) \
+ { \
+ .barrier = ATOMIC_INIT(barrier_), \
+ .cpus_entered = ATOMIC_INIT(0), \
+ .ap_call = ap_func_, \
+ .ap_arg = ap_arg_, \
+ .bsp_call = bsp_func_, \
+ .bsp_arg = bsp_arg_, \
+ }
+
+#define MP_FR_BLOCK_APS(ap_func, ap_arg, bsp_func, bsp_arg) \
+ MP_FLIGHT_RECORD(0, ap_func, ap_arg, bsp_func, bsp_arg)
+
+#define MP_FR_NOBLOCK_APS(ap_func, ap_arg, bsp_func, bsp_arg) \
+ MP_FLIGHT_RECORD(1, ap_func, ap_arg, bsp_func, bsp_arg)
+
+/*
+ * The mp_params structure provides the arguments to the mp subsystem
+ * for bringing up APs.
+ *
+ * At present this is overkill for U-Boot, but it may make it easier to add
+ * SMM support.
+ */
+struct mp_params {
+ int num_cpus; /* Total cpus include BSP */
+ int parallel_microcode_load;
+ const void *microcode_pointer;
+ /* Flight plan for APs and BSP */
+ struct mp_flight_record *flight_plan;
+ int num_records;
+};
+
+/*
+ * mp_init() will set up the SIPI vector and bring up the APs according to
+ * mp_params. Each flight record will be executed according to the plan. Note
+ * that the MP infrastructure uses SMM default area without saving it. It's
+ * up to the chipset or mainboard to either e820 reserve this area or save this
+ * region prior to calling mp_init() and restoring it after mp_init returns.
+ *
+ * At the time mp_init() is called the MTRR MSRs are mirrored into APs then
+ * caching is enabled before running the flight plan.
+ *
+ * The MP init has the following properties:
+ * 1. APs are brought up in parallel.
+ * 2. The ordering of cpu number and APIC ids is not deterministic.
+ * Therefore, one cannot rely on this property or the order of devices in
+ * the device tree unless the chipset or mainboard know the APIC ids
+ * a priori.
+ *
+ * mp_init() returns < 0 on error, 0 on success.
+ */
+int mp_init(struct mp_params *params);
+
+/* Probes the CPU device */
+int mp_init_cpu(struct udevice *cpu, void *unused);
+
+#endif /* _X86_MP_H_ */
projects / project / bcm63xx / u-boot.git / commitdiff