BOARD:=adm5120
BOARDNAME:=Infineon/ADMtek ADM5120
-LINUX_VERSION:=2.6.32.16
+LINUX_VERSION:=2.6.32.25
SUBTARGETS:=router_le router_be
INITRAMFS_EXTRA_FILES:=
BOARDNAME:=TI AR7
FEATURES:=squashfs jffs2 atm
-LINUX_VERSION:=2.6.32.16
+LINUX_VERSION:=2.6.32.25
include $(INCLUDE_DIR)/target.mk
FEATURES:=squashfs jffs2 targz
CFLAGS:=-Os -pipe -mips32r2 -mtune=mips32r2 -funit-at-a-time
-LINUX_VERSION:=2.6.32.16
+LINUX_VERSION:=2.6.32.25
include $(INCLUDE_DIR)/target.mk
FEATURES:=jffs2 usb pci
SUBTARGETS=au1500 au1550
-LINUX_VERSION:=2.6.32.16
+LINUX_VERSION:=2.6.32.25
include $(INCLUDE_DIR)/target.mk
DEFAULT_PACKAGES += wpad-mini yamonenv
BOARD:=avr32
BOARDNAME:=Atmel AVR32
FEATURES:=squashfs
-LINUX_VERSION:=2.6.32.16
+LINUX_VERSION:=2.6.32.25
include $(INCLUDE_DIR)/target.mk
BOARDNAME:=Broadcom BCM947xx/953xx
FEATURES:=squashfs usb pcmcia
-LINUX_VERSION:=2.6.32.16
+LINUX_VERSION:=2.6.32.25
include $(INCLUDE_DIR)/target.mk
DEFAULT_PACKAGES += wpad-mini kmod-switch kmod-diag nvram
}
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
-@@ -733,6 +733,9 @@ static void __cpuinit build_r4000_tlb_re
+@@ -738,6 +738,9 @@ static void __cpuinit build_r4000_tlb_re
/* No need for uasm_i_nop */
}
#ifdef CONFIG_64BIT
build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */
#else
-@@ -1185,6 +1188,9 @@ build_r4000_tlbchange_handler_head(u32 *
+@@ -1190,6 +1193,9 @@ build_r4000_tlbchange_handler_head(u32 *
struct uasm_reloc **r, unsigned int pte,
unsigned int ptr)
{
--- a/drivers/ssb/driver_chipcommon.c
+++ b/drivers/ssb/driver_chipcommon.c
-@@ -260,6 +260,8 @@ void ssb_chipco_resume(struct ssb_chipco
+@@ -261,6 +261,8 @@ void ssb_chipco_resume(struct ssb_chipco
void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc,
u32 *plltype, u32 *n, u32 *m)
{
*n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
*plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
switch (*plltype) {
-@@ -283,6 +285,8 @@ void ssb_chipco_get_clockcpu(struct ssb_
+@@ -284,6 +286,8 @@ void ssb_chipco_get_clockcpu(struct ssb_
void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc,
u32 *plltype, u32 *n, u32 *m)
{
}
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
-@@ -1073,6 +1073,8 @@ u32 ssb_clockspeed(struct ssb_bus *bus)
+@@ -1075,6 +1075,8 @@ u32 ssb_clockspeed(struct ssb_bus *bus)
if (bus->chip_id == 0x5365) {
rate = 100000000;
depends on USB
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
-@@ -1141,8 +1141,16 @@ MODULE_LICENSE ("GPL");
+@@ -1142,8 +1142,16 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ehci_atmel_driver
#endif
- ssb_write32(dev, 0x400, tmp);
- tmp = ssb_read32(dev, 0x400);
- printk("USB20H fcr: 0x%0x\n", tmp);
--
++ /* Work around for 5354 failures */
++ if ((dev->id.revision == 2) && (dev->bus->chip_id == 0x5354)) {
++ /* Change syn01 reg */
++ tmp = 0x00fe00fe;
++ ssb_write32(dev, 0x894, tmp);
+
- /* Change Shim control reg */
- tmp = ssb_read32(dev, 0x304);
- tmp &= ~0x100;
- ssb_write32(dev, 0x304, tmp);
- tmp = ssb_read32(dev, 0x304);
- printk("USB20H shim: 0x%0x\n", tmp);
-+ /* Work around for 5354 failures */
-+ if ((dev->id.revision == 2) && (dev->bus->chip_id == 0x5354)) {
-+ /* Change syn01 reg */
-+ tmp = 0x00fe00fe;
-+ ssb_write32(dev, 0x894, tmp);
-+
+ /* Change syn03 reg */
+ tmp = ssb_read32(dev, 0x89c);
+ tmp |= 0x1;
--- a/drivers/ssb/Kconfig
+++ b/drivers/ssb/Kconfig
-@@ -140,6 +140,8 @@ config SSB_DRIVER_MIPS
+@@ -141,6 +141,8 @@ config SSB_DRIVER_MIPS
config SSB_EMBEDDED
bool
depends on SSB_DRIVER_MIPS
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
-@@ -195,7 +195,11 @@
+@@ -195,7 +195,11 @@ static inline void ide_std_init_ports(st
hw->io_ports.ctl_addr = ctl_addr;
}
#include <net/checksum.h>
#include <net/ip.h>
-@@ -457,8 +458,9 @@ static void _tw32_flush(struct tg3 *tp,
+@@ -457,8 +458,9 @@ static void _tw32_flush(struct tg3 *tp,
static inline void tw32_mailbox_flush(struct tg3 *tp, u32 off, u32 val)
{
tp->write32_mbox(tp, off, val);
{
u32 frame_val;
unsigned int loops;
-@@ -866,6 +873,11 @@ static int tg3_writephy(struct tg3 *tp,
+@@ -866,6 +873,11 @@ static int tg3_writephy(struct tg3 *tp,
return ret;
}
tw32(GRC_MODE, tp->grc_mode);
if (tp->pci_chip_rev_id == CHIPREV_ID_5705_A0) {
-@@ -6704,9 +6742,12 @@ static int tg3_halt_cpu(struct tg3 *tp,
+@@ -6704,9 +6742,12 @@ static int tg3_halt_cpu(struct tg3 *tp,
return -ENODEV;
}
fw_data = (void *)tp->fw->data;
/* Firmware blob starts with version numbers, followed by
-@@ -6828,6 +6874,11 @@ static int tg3_load_tso_firmware(struct
+@@ -6828,6 +6874,11 @@ static int tg3_load_tso_firmware(struct
unsigned long cpu_base, cpu_scratch_base, cpu_scratch_size;
int err, i;
if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)) {
/* All of this garbage is because when using non-tagged
* IRQ status the mailbox/status_block protocol the chip
-@@ -9800,6 +9856,11 @@ static int tg3_test_nvram(struct tg3 *tp
+@@ -9801,6 +9857,11 @@ static int tg3_test_nvram(struct tg3 *tp
if (tp->tg3_flags3 & TG3_FLG3_NO_NVRAM)
return 0;
if (tg3_nvram_read(tp, 0, &magic) != 0)
return -EIO;
-@@ -10594,7 +10655,7 @@ static int tg3_ioctl(struct net_device *
+@@ -10595,7 +10656,7 @@ static int tg3_ioctl(struct net_device *
return -EAGAIN;
spin_lock_bh(&tp->lock);
spin_unlock_bh(&tp->lock);
data->val_out = mii_regval;
-@@ -10610,7 +10671,7 @@ static int tg3_ioctl(struct net_device *
+@@ -10611,7 +10672,7 @@ static int tg3_ioctl(struct net_device *
return -EAGAIN;
spin_lock_bh(&tp->lock);
spin_unlock_bh(&tp->lock);
return err;
-@@ -11255,6 +11316,12 @@ static void __devinit tg3_get_5717_nvram
+@@ -11256,6 +11317,12 @@ static void __devinit tg3_get_5717_nvram
/* Chips other than 5700/5701 use the NVRAM for fetching info. */
static void __devinit tg3_nvram_init(struct tg3 *tp)
{
tw32_f(GRC_EEPROM_ADDR,
(EEPROM_ADDR_FSM_RESET |
(EEPROM_DEFAULT_CLOCK_PERIOD <<
-@@ -11515,6 +11582,9 @@ static int tg3_nvram_write_block(struct
+@@ -11516,6 +11583,9 @@ static int tg3_nvram_write_block(struct
{
int ret;
if (tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT) {
tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl &
~GRC_LCLCTRL_GPIO_OUTPUT1);
-@@ -12800,6 +12870,11 @@ static int __devinit tg3_get_invariants(
+@@ -12801,6 +12871,11 @@ static int __devinit tg3_get_invariants(
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701)))
tp->tg3_flags |= TG3_FLAG_SRAM_USE_CONFIG;
/* Get eeprom hw config before calling tg3_set_power_state().
* In particular, the TG3_FLG2_IS_NIC flag must be
* determined before calling tg3_set_power_state() so that
-@@ -13189,6 +13264,10 @@ static int __devinit tg3_get_device_addr
+@@ -13190,6 +13265,10 @@ static int __devinit tg3_get_device_addr
}
if (!is_valid_ether_addr(&dev->dev_addr[0])) {
#ifdef CONFIG_SPARC
if (!tg3_get_default_macaddr_sparc(tp))
return 0;
-@@ -13681,6 +13760,7 @@ static char * __devinit tg3_phy_string(s
+@@ -13682,6 +13761,7 @@ static char * __devinit tg3_phy_string(s
case PHY_ID_BCM5704: return "5704";
case PHY_ID_BCM5705: return "5705";
case PHY_ID_BCM5750: return "5750";
case PHY_ID_BCM5752: return "5752";
case PHY_ID_BCM5714: return "5714";
case PHY_ID_BCM5780: return "5780";
-@@ -13892,6 +13972,13 @@ static int __devinit tg3_init_one(struct
+@@ -13893,6 +13973,13 @@ static int __devinit tg3_init_one(struct
tp->msg_enable = tg3_debug;
else
tp->msg_enable = TG3_DEF_MSG_ENABLE;
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
-@@ -850,7 +850,7 @@ static int b44_rx(struct b44 *bp, int bu
+@@ -817,7 +817,7 @@ static int b44_rx(struct b44 *bp, int bu
struct sk_buff *copy_skb;
b44_recycle_rx(bp, cons, bp->rx_prod);
UASM_i_LA_mostly(p, ptr, pgdc);
#endif
uasm_i_mfc0(p, tmp, C0_BADVADDR); /* get faulting address */
-@@ -733,12 +736,12 @@ static void __cpuinit build_r4000_tlb_re
+@@ -738,12 +741,12 @@ static void __cpuinit build_r4000_tlb_re
/* No need for uasm_i_nop */
}
build_get_pgde32(&p, K0, K1); /* get pgd in K1 */
#endif
-@@ -750,6 +753,9 @@ static void __cpuinit build_r4000_tlb_re
+@@ -755,6 +758,9 @@ static void __cpuinit build_r4000_tlb_re
build_update_entries(&p, K0, K1);
build_tlb_write_entry(&p, &l, &r, tlb_random);
uasm_l_leave(&l, p);
uasm_i_eret(&p); /* return from trap */
#ifdef CONFIG_HUGETLB_PAGE
-@@ -1188,12 +1194,12 @@ build_r4000_tlbchange_handler_head(u32 *
+@@ -1193,12 +1199,12 @@ build_r4000_tlbchange_handler_head(u32 *
struct uasm_reloc **r, unsigned int pte,
unsigned int ptr)
{
build_get_pgde32(p, pte, ptr); /* get pgd in ptr */
#endif
-@@ -1230,6 +1236,9 @@ build_r4000_tlbchange_handler_tail(u32 *
+@@ -1235,6 +1241,9 @@ build_r4000_tlbchange_handler_tail(u32 *
build_update_entries(p, tmp, ptr);
build_tlb_write_entry(p, l, r, tlb_indexed);
uasm_l_leave(l, *p);
BOARD:=brcm63xx
BOARDNAME:=Broadcom BCM63xx
FEATURES:=squashfs jffs2 usb atm pci pcmcia
-LINUX_VERSION:=2.6.32.16
+LINUX_VERSION:=2.6.32.25
include $(INCLUDE_DIR)/target.mk
FEATURES:=targz pci ext2
CFLAGS:=-O2 -pipe -mtune=r5000 -funit-at-a-time
-LINUX_VERSION:=2.6.32.16
+LINUX_VERSION:=2.6.32.25
include $(INCLUDE_DIR)/target.mk
/* Control registers */
#define FPCREG_RID 0 /* $0 = revision id */
-@@ -1274,6 +1276,13 @@ int fpu_emulator_cop1Handler(struct pt_r
+@@ -1281,6 +1283,13 @@ int fpu_emulator_cop1Handler(struct pt_r
return sig;
}
/* The Mellanox Tavor device gives false positive parity errors
* Mark this device with a broken_parity_status, to allow
* PCI scanning code to "skip" this now blacklisted device.
-@@ -1887,7 +1888,9 @@ static void __devinit fixup_rev1_53c810(
+@@ -1907,7 +1908,9 @@ static void __devinit fixup_rev1_53c810(
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810);
/* Enable 1k I/O space granularity on the Intel P64H2 */
static void __devinit quirk_p64h2_1k_io(struct pci_dev *dev)
{
-@@ -2522,6 +2525,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
+@@ -2546,6 +2549,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1518, quirk_i82576_sriov);
#endif /* CONFIG_PCI_IOV */
dev_queue_xmit_nit(skb, dev);
if (netif_needs_gso(dev, skb)) {
-@@ -1789,8 +1796,7 @@ u16 skb_tx_hash(const struct net_device
+@@ -1789,8 +1796,7 @@ u16 skb_tx_hash(const struct net_device
}
EXPORT_SYMBOL(skb_tx_hash);
new->csum = old->csum;
new->local_df = old->local_df;
new->pkt_type = old->pkt_type;
-@@ -2776,6 +2879,13 @@ void __init skb_init(void)
+@@ -2781,6 +2884,13 @@ void __init skb_init(void)
0,
SLAB_HWCACHE_ALIGN|SLAB_PANIC,
NULL);
/* return EBUSY when somebody else is registered, return EEXIST if the
* same handler is registered, return 0 in case of success. */
int nf_register_queue_handler(u_int8_t pf, const struct nf_queue_handler *qh)
-@@ -80,7 +100,7 @@ void nf_unregister_queue_handlers(const
+@@ -80,7 +100,7 @@ void nf_unregister_queue_handlers(const
}
EXPORT_SYMBOL_GPL(nf_unregister_queue_handlers);
struct tcrypt_result {
struct completion completion;
int err;
-@@ -2350,8 +2352,11 @@ static int alg_find_test(const char *alg
+@@ -2434,8 +2436,11 @@ static int alg_find_test(const char *alg
return -1;
}
int i;
int j;
int rc;
-@@ -2406,5 +2411,8 @@ notest:
+@@ -2490,5 +2495,8 @@ notest:
return 0;
non_fips_alg:
return -EINVAL;
--- a/drivers/ssb/driver_chipcommon.c
+++ b/drivers/ssb/driver_chipcommon.c
-@@ -233,6 +233,8 @@ void ssb_chipcommon_init(struct ssb_chip
- {
- if (!cc->dev)
- return; /* We don't have a ChipCommon */
-+ if (cc->dev->id.revision >= 11)
-+ cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT);
- ssb_pmu_init(cc);
- chipco_powercontrol_init(cc);
- ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
-@@ -370,6 +372,7 @@ u32 ssb_chipco_gpio_control(struct ssb_c
+@@ -373,6 +373,7 @@ u32 ssb_chipco_gpio_control(struct ssb_c
{
return chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value);
}
}
/* Get the word-offset for a SSB_SPROM_XXX define. */
--#define SPOFF(offset) (((offset) - SSB_SPROM_BASE) / sizeof(u16))
+-#define SPOFF(offset) (((offset) - SSB_SPROM_BASE1) / sizeof(u16))
+#define SPOFF(offset) ((offset) / sizeof(u16))
/* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */
#define SPEX16(_outvar, _offset, _mask, _shift) \
out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift))
-@@ -253,7 +254,7 @@ static int sprom_do_read(struct ssb_bus
- int i;
-
- for (i = 0; i < bus->sprom_size; i++)
-- sprom[i] = ioread16(bus->mmio + SSB_SPROM_BASE + (i * 2));
-+ sprom[i] = ioread16(bus->mmio + bus->sprom_offset + (i * 2));
-
- return 0;
- }
-@@ -284,7 +285,7 @@ static int sprom_do_write(struct ssb_bus
- ssb_printk("75%%");
- else if (i % 2)
- ssb_printk(".");
-- writew(sprom[i], bus->mmio + SSB_SPROM_BASE + (i * 2));
-+ writew(sprom[i], bus->mmio + bus->sprom_offset + (i * 2));
- mmiowb();
- msleep(20);
- }
-@@ -620,6 +621,14 @@ static int ssb_pci_sprom_get(struct ssb_
- int err = -ENOMEM;
- u16 *buf;
-
-+ if (!ssb_is_sprom_available(bus)) {
-+ ssb_printk(KERN_ERR PFX "No SPROM available!\n");
-+ return -ENODEV;
-+ }
-+
-+ bus->sprom_offset = (bus->chipco.dev->id.revision < 31) ?
-+ SSB_SPROM_BASE1 : SSB_SPROM_BASE31;
-+
- buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
- if (!buf)
- goto out;
--- a/drivers/ssb/pcihost_wrapper.c
+++ b/drivers/ssb/pcihost_wrapper.c
@@ -12,6 +12,7 @@
+static int ssb_pcmcia_get_mac(struct pcmcia_device *p_dev,
+ tuple_t *tuple,
+ void *priv)
-+{
+ {
+- tuple_t tuple;
+- int res;
+- unsigned char buf[32];
+ struct ssb_sprom *sprom = priv;
+
+ if (tuple->TupleData[0] != CISTPL_FUNCE_LAN_NODE_ID)
+static int ssb_pcmcia_do_get_invariants(struct pcmcia_device *p_dev,
+ tuple_t *tuple,
+ void *priv)
- {
-- tuple_t tuple;
-- int res;
-- unsigned char buf[32];
++{
+ struct ssb_init_invariants *iv = priv;
struct ssb_sprom *sprom = &iv->sprom;
struct ssb_boardinfo *bi = &iv->boardinfo;
if (err)
ssb_printk(KERN_ERR PFX "SPROM write: Could not thaw all devices\n");
out_unlock:
-@@ -179,3 +176,17 @@ const struct ssb_sprom *ssb_get_fallback
- {
- return fallback_sprom;
- }
-+
-+/* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */
-+bool ssb_is_sprom_available(struct ssb_bus *bus)
-+{
-+ /* status register only exists on chipcomon rev >= 11 and we need check
-+ for >= 31 only */
-+ /* this routine differs from specs as we do not access SPROM directly
-+ on PCMCIA */
-+ if (bus->bustype == SSB_BUSTYPE_PCI &&
-+ bus->chipco.dev->id.revision >= 31)
-+ return bus->chipco.capabilities & SSB_CHIPCO_CAP_SPROM;
-+
-+ return true;
-+}
--- a/drivers/ssb/ssb_private.h
+++ b/drivers/ssb/ssb_private.h
@@ -176,19 +176,27 @@ extern const struct ssb_sprom *ssb_get_f
/* See enum ssb_quirks */
unsigned int quirks;
-@@ -301,6 +305,7 @@ struct ssb_bus {
- /* ID information about the Chip. */
- u16 chip_id;
- u16 chip_rev;
-+ u16 sprom_offset;
- u16 sprom_size; /* number of words in sprom */
- u8 chip_package;
-
-@@ -390,6 +395,9 @@ extern int ssb_bus_sdiobus_register(stru
-
- extern void ssb_bus_unregister(struct ssb_bus *bus);
-
-+/* Does the device have an SPROM? */
-+extern bool ssb_is_sprom_available(struct ssb_bus *bus);
-+
- /* Set a fallback SPROM.
- * See kdoc at the function definition for complete documentation. */
- extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom);
---- a/include/linux/ssb/ssb_driver_chipcommon.h
-+++ b/include/linux/ssb/ssb_driver_chipcommon.h
-@@ -53,6 +53,7 @@
- #define SSB_CHIPCO_CAP_64BIT 0x08000000 /* 64-bit Backplane */
- #define SSB_CHIPCO_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */
- #define SSB_CHIPCO_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */
-+#define SSB_CHIPCO_CAP_SPROM 0x40000000 /* SPROM present */
- #define SSB_CHIPCO_CORECTL 0x0008
- #define SSB_CHIPCO_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */
- #define SSB_CHIPCO_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */
-@@ -385,6 +386,7 @@
-
-
- /** Chip specific Chip-Status register contents. */
-+#define SSB_CHIPCO_CHST_4322_SPROM_EXISTS 0x00000040 /* SPROM present */
- #define SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL 0x00000003
- #define SSB_CHIPCO_CHST_4325_DEFCIS_SEL 0 /* OTP is powered up, use def. CIS, no SPROM */
- #define SSB_CHIPCO_CHST_4325_SPROM_SEL 1 /* OTP is powered up, SPROM is present */
-@@ -398,6 +400,18 @@
- #define SSB_CHIPCO_CHST_4325_RCAL_VALUE_SHIFT 4
- #define SSB_CHIPCO_CHST_4325_PMUTOP_2B 0x00000200 /* 1 for 2b, 0 for to 2a */
-
-+/** Macros to determine SPROM presence based on Chip-Status register. */
-+#define SSB_CHIPCO_CHST_4312_SPROM_PRESENT(status) \
-+ ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
-+ SSB_CHIPCO_CHST_4325_OTP_SEL)
-+#define SSB_CHIPCO_CHST_4322_SPROM_PRESENT(status) \
-+ (status & SSB_CHIPCO_CHST_4322_SPROM_EXISTS)
-+#define SSB_CHIPCO_CHST_4325_SPROM_PRESENT(status) \
-+ (((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
-+ SSB_CHIPCO_CHST_4325_DEFCIS_SEL) && \
-+ ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
-+ SSB_CHIPCO_CHST_4325_OTP_SEL))
-+
-
-
- /** Clockcontrol masks and values **/
-@@ -564,6 +578,7 @@ struct ssb_chipcommon_pmu {
- struct ssb_chipcommon {
- struct ssb_device *dev;
- u32 capabilities;
-+ u32 status;
- /* Fast Powerup Delay constant */
- u16 fast_pwrup_delay;
- struct ssb_chipcommon_pmu pmu;
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
-@@ -170,26 +170,27 @@
- #define SSB_SPROMSIZE_WORDS_R4 220
- #define SSB_SPROMSIZE_BYTES_R123 (SSB_SPROMSIZE_WORDS_R123 * sizeof(u16))
+@@ -172,25 +172,25 @@
#define SSB_SPROMSIZE_BYTES_R4 (SSB_SPROMSIZE_WORDS_R4 * sizeof(u16))
--#define SSB_SPROM_BASE 0x1000
+ #define SSB_SPROM_BASE1 0x1000
+ #define SSB_SPROM_BASE31 0x0800
-#define SSB_SPROM_REVISION 0x107E
-+#define SSB_SPROM_BASE1 0x1000
-+#define SSB_SPROM_BASE31 0x0800
+#define SSB_SPROM_REVISION 0x007E
#define SSB_SPROM_REVISION_REV 0x00FF /* SPROM Revision number */
#define SSB_SPROM_REVISION_CRC 0xFF00 /* SPROM CRC8 value */
#define SSB_SPROM1_BINF_BREV 0x00FF /* Board Revision */
#define SSB_SPROM1_BINF_CCODE 0x0F00 /* Country Code */
#define SSB_SPROM1_BINF_CCODE_SHIFT 8
-@@ -197,63 +198,63 @@
+@@ -198,63 +198,63 @@
#define SSB_SPROM1_BINF_ANTBG_SHIFT 12
#define SSB_SPROM1_BINF_ANTA 0xC000 /* Available A-PHY antennas */
#define SSB_SPROM1_BINF_ANTA_SHIFT 14
#define SSB_SPROM3_CCKPO_1M 0x000F /* 1M Rate PO */
#define SSB_SPROM3_CCKPO_2M 0x00F0 /* 2M Rate PO */
#define SSB_SPROM3_CCKPO_2M_SHIFT 4
-@@ -264,100 +265,100 @@
+@@ -265,100 +265,100 @@
#define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */
/* SPROM Revision 4 */
#define SSB_SPROM8_RSSISMF2G 0x000F
#define SSB_SPROM8_RSSISMC2G 0x00F0
#define SSB_SPROM8_RSSISMC2G_SHIFT 4
-@@ -365,7 +366,7 @@
+@@ -366,7 +366,7 @@
#define SSB_SPROM8_RSSISAV2G_SHIFT 8
#define SSB_SPROM8_BXA2G 0x1800
#define SSB_SPROM8_BXA2G_SHIFT 11
#define SSB_SPROM8_RSSISMF5G 0x000F
#define SSB_SPROM8_RSSISMC5G 0x00F0
#define SSB_SPROM8_RSSISMC5G_SHIFT 4
-@@ -373,47 +374,47 @@
+@@ -374,47 +374,47 @@
#define SSB_SPROM8_RSSISAV5G_SHIFT 8
#define SSB_SPROM8_BXA5G 0x1800
#define SSB_SPROM8_BXA5G_SHIFT 11
* macro override instead of weak attribute alias, to workaround
--- a/kernel/sched.c
+++ b/kernel/sched.c
-@@ -6113,6 +6113,7 @@ int can_nice(const struct task_struct *p
+@@ -6224,6 +6224,7 @@ int can_nice(const struct task_struct *p
return (nice_rlim <= p->signal->rlim[RLIMIT_NICE].rlim_cur ||
capable(CAP_SYS_NICE));
}
/**
* zap_vma_ptes - remove ptes mapping the vma
-@@ -2486,6 +2487,7 @@ int vmtruncate_range(struct inode *inode
+@@ -2496,6 +2497,7 @@ int vmtruncate_range(struct inode *inode
return 0;
}
void *caller)
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
-@@ -713,6 +713,7 @@ extern void show_free_areas(void);
+@@ -717,6 +717,7 @@ extern void show_free_areas(void);
int shmem_lock(struct file *file, int lock, struct user_struct *user);
struct file *shmem_file_setup(const char *name, loff_t size, unsigned long flags);
FEATURES:=squashfs
SUBTARGETS=generic harddisk
-LINUX_VERSION:=2.6.32.16
+LINUX_VERSION:=2.6.32.25
include $(INCLUDE_DIR)/target.mk
SUBTARGETS=generic harddisk
CFLAGS=-Os -pipe -march=armv5t -mtune=xscale -funit-at-a-time
-LINUX_VERSION:=2.6.32.16
+LINUX_VERSION:=2.6.32.25
include $(INCLUDE_DIR)/target.mk
FEATURES:=squashfs
CFLAGS:=-Os -pipe -funit-at-a-time -mcpu=405
-LINUX_VERSION:=2.6.32.16
+LINUX_VERSION:=2.6.32.25
include $(INCLUDE_DIR)/target.mk
FEATURES:=squashfs
CFLAGS:=-Os -pipe -funit-at-a-time -mcpu=440
-LINUX_VERSION:=2.6.32.16
+LINUX_VERSION:=2.6.32.25
include $(INCLUDE_DIR)/target.mk
BOARDNAME:=Mikrotik RouterBoard 532
FEATURES:=jffs2 pci targz
-LINUX_VERSION:=2.6.32.16
+LINUX_VERSION:=2.6.32.25
include $(INCLUDE_DIR)/target.mk
DEFAULT_PACKAGES += wpad-mini kmod-madwifi kmod-input-rb532
FEATURES:=squashfs jffs2 ext2 vdi vmdk pcmcia targz
SUBTARGETS=generic olpc xen_domu ep80579
-LINUX_VERSION:=2.6.32.16
+LINUX_VERSION:=2.6.32.25
include $(INCLUDE_DIR)/target.mk
FEATURES:=jffs2 targz ubifs audio
SUBTARGETS:=qi_lb60 n516 n526
-LINUX_VERSION:=2.6.32.16
+LINUX_VERSION:=2.6.32.25
DEVICE_TYPE=other
projects / openwrt / svn-archive / archive.git / commitdiff