Pull powerpc updates from Michael Ellerman:
"This is a bit late, partly due to me travelling, and partly due to a
power outage knocking out some of my test systems *while* I was
travelling.
- Initial support for running on a system with an Ultravisor, which
is software that runs below the hypervisor and protects guests
against some attacks by the hypervisor.
- Support for building the kernel to run as a "Secure Virtual
Machine", ie. as a guest capable of running on a system with an
Ultravisor.
- Some changes to our DMA code on bare metal, to allow devices with
medium sized DMA masks (> 32 && < 59 bits) to use more than 2GB of
DMA space.
- Support for firmware assisted crash dumps on bare metal (powernv).
- Two series fixing bugs in and refactoring our PCI EEH code.
- A large series refactoring our exception entry code to use gas
macros, both to make it more readable and also enable some future
optimisations.
As well as many cleanups and other minor features & fixups.
Thanks to: Adam Zerella, Alexey Kardashevskiy, Alistair Popple, Andrew
Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Anshuman Khandual,
Balbir Singh, Benjamin Herrenschmidt, Cédric Le Goater, Christophe
JAILLET, Christophe Leroy, Christopher M. Riedl, Christoph Hellwig,
Claudio Carvalho, Daniel Axtens, David Gibson, David Hildenbrand,
Desnes A. Nunes do Rosario, Ganesh Goudar, Gautham R. Shenoy, Greg
Kurz, Guerney Hunt, Gustavo Romero, Halil Pasic, Hari Bathini, Joakim
Tjernlund, Jonathan Neuschafer, Jordan Niethe, Leonardo Bras, Lianbo
Jiang, Madhavan Srinivasan, Mahesh Salgaonkar, Mahesh Salgaonkar,
Masahiro Yamada, Maxiwell S. Garcia, Michael Anderson, Nathan
Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Oliver
O'Halloran, Qian Cai, Ram Pai, Ravi Bangoria, Reza Arbab, Ryan Grimm,
Sam Bobroff, Santosh Sivaraj, Segher Boessenkool, Sukadev Bhattiprolu,
Thiago Bauermann, Thiago Jung Bauermann, Thomas Gleixner, Tom
Lendacky, Vasant Hegde"
* tag 'powerpc-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (264 commits)
powerpc/mm/mce: Keep irqs disabled during lockless page table walk
powerpc: Use ftrace_graph_ret_addr() when unwinding
powerpc/ftrace: Enable HAVE_FUNCTION_GRAPH_RET_ADDR_PTR
ftrace: Look up the address of return_to_handler() using helpers
powerpc: dump kernel log before carrying out fadump or kdump
docs: powerpc: Add missing documentation reference
powerpc/xmon: Fix output of XIVE IPI
powerpc/xmon: Improve output of XIVE interrupts
powerpc/mm/radix: remove useless kernel messages
powerpc/fadump: support holes in kernel boot memory area
powerpc/fadump: remove RMA_START and RMA_END macros
powerpc/fadump: update documentation about option to release opalcore
powerpc/fadump: consider f/w load area
powerpc/opalcore: provide an option to invalidate /sys/firmware/opal/core file
powerpc/opalcore: export /sys/firmware/opal/core for analysing opal crashes
powerpc/fadump: update documentation about CONFIG_PRESERVE_FA_DUMP
powerpc/fadump: add support to preserve crash data on FADUMP disabled kernel
powerpc/fadump: improve how crashed kernel's memory is reserved
powerpc/fadump: consider reserved ranges while releasing memory
powerpc/fadump: make crash memory ranges array allocation generic
...
18 files changed:
the chance of application behavior change because of timing
differences. The counts are reported via debugfs.
+# Select if the architecture has support for applying RELR relocations.
+config ARCH_HAS_RELR
+ bool
+
+config RELR
+ bool "Use RELR relocation packing"
+ depends on ARCH_HAS_RELR && TOOLS_SUPPORT_RELR
+ default y
+ help
+ Store the kernel's dynamic relocations in the RELR relocation packing
+ format. Requires a compatible linker (LLD supports this feature), as
+ well as compatible NM and OBJCOPY utilities (llvm-nm and llvm-objcopy
+ are compatible).
+
+ config ARCH_HAS_MEM_ENCRYPT
+ bool
+
source "kernel/gcov/Kconfig"
source "scripts/gcc-plugins/Kconfig"
signal.o sysfs.o cacheinfo.o time.o \
prom.o traps.o setup-common.o \
udbg.o misc.o io.o misc_$(BITS).o \
- of_platform.o prom_parse.o \
- dma-common.o
+ of_platform.o prom_parse.o
obj-$(CONFIG_PPC64) += setup_64.o sys_ppc32.o \
signal_64.o ptrace32.o \
- paca.o nvram_64.o firmware.o
+ paca.o nvram_64.o firmware.o note.o
obj-$(CONFIG_VDSO32) += vdso32/
obj-$(CONFIG_PPC_WATCHDOG) += watchdog.o
obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o
__dma_sync_page(paddr, size, dir);
}
- /*
- * Return the PFN for a given cpu virtual address returned by arch_dma_alloc.
- */
- long arch_dma_coherent_to_pfn(struct device *dev, void *vaddr,
- dma_addr_t dma_addr)
+ void arch_dma_prep_coherent(struct page *page, size_t size)
{
- /* This should always be populated, so we don't test every
- * level. If that fails, we'll have a nice crash which
- * will be as good as a BUG_ON()
- */
- unsigned long cpu_addr = (unsigned long)vaddr;
- pgd_t *pgd = pgd_offset_k(cpu_addr);
- pud_t *pud = pud_offset(pgd, cpu_addr);
- pmd_t *pmd = pmd_offset(pud, cpu_addr);
- pte_t *ptep = pte_offset_kernel(pmd, cpu_addr);
+ unsigned long kaddr = (unsigned long)page_address(page);
- if (pte_none(*ptep) || !pte_present(*ptep))
- return 0;
- return pte_pfn(*ptep);
+ flush_dcache_range(kaddr, kaddr + size);
}
-
-static int __init atomic_pool_init(void)
-{
- return dma_atomic_pool_init(GFP_KERNEL, pgprot_noncached(PAGE_KERNEL));
-}
-postcore_initcall(atomic_pool_init);
panic("Can not allocate SWIOTLB buffer earlier and can't now provide you with the DMA bounce buffer");
if (mem_encrypt_active())
- pr_warn_once("%s is active and system is using DMA bounce buffers\n",
- sme_active() ? "SME" : "SEV");
+ pr_warn_once("Memory encryption is active and system is using DMA bounce buffers\n");
+ if (mapping_size > alloc_size) {
+ dev_warn_once(hwdev, "Invalid sizes (mapping: %zd bytes, alloc: %zd bytes)",
+ mapping_size, alloc_size);
+ return (phys_addr_t)DMA_MAPPING_ERROR;
+ }
+
mask = dma_get_seg_boundary(hwdev);
tbl_dma_addr &= mask;
projects / openwrt / staging / blogic.git / commitdiff