drm: Add DPCD definitions for DP 1.4 FEC feature

Forward Error Correction is supported on DP 1.4.
This patch adds corresponding DPCD register definitions.

v2: Add dri-devel mailing list to the CC list(Jani)

v3: Change names, add missing masks (Manasi)

v4: Add missing shifts to mask (Manasi)

v5: Arrange the definitions in ascending order
of the address (Jani)

v6: remove unnecessary definitions. Add missing masks,
add "/* 1.4 */" to offset definitions. (Jani)

Cc: dri-devel@lists.freedesktop.org
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1518636498-20921-1-git-send-email-anusha.srivatsa@intel.com

diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
index 768d9eda06cb9a1b60c1ce4f3b7fbaa8b5bc4779..4a31162d7d6b683fbcb3446c3dcacb39383c4d20 100644 (file)
--- a/include/drm/drm_dp_helper.h
+++ b/include/drm/drm_dp_helper.h
@@ -329,6 +329,13 @@
 # define DP_DS_12BPC                       2
 # define DP_DS_16BPC                       3
 
+/* DP Forward error Correction Registers */
+#define DP_FEC_CAPABILITY                  0x090    /* 1.4 */
+# define DP_FEC_CAPABLE                            (1 << 0)
+# define DP_FEC_UNCORR_BLK_ERROR_COUNT_CAP  (1 << 1)
+# define DP_FEC_CORR_BLK_ERROR_COUNT_CAP    (1 << 2)
+# define DP_FEC_BIT_ERROR_COUNT_CAP        (1 << 3)
+
 /* link configuration */
 #define        DP_LINK_BW_SET                      0x100
 # define DP_LINK_RATE_TABLE                0x00    /* eDP 1.4 */
@@ -445,6 +452,19 @@
 #define DP_UPSTREAM_DEVICE_DP_PWR_NEED     0x118   /* 1.2 */
 # define DP_PWR_NOT_NEEDED                 (1 << 0)
 
+#define DP_FEC_CONFIGURATION               0x120    /* 1.4 */
+# define DP_FEC_READY                      (1 << 0)
+# define DP_FEC_ERR_COUNT_SEL_MASK         (7 << 1)
+# define DP_FEC_ERR_COUNT_DIS              (0 << 1)
+# define DP_FEC_UNCORR_BLK_ERROR_COUNT     (1 << 1)
+# define DP_FEC_CORR_BLK_ERROR_COUNT       (2 << 1)
+# define DP_FEC_BIT_ERROR_COUNT                    (3 << 1)
+# define DP_FEC_LANE_SELECT_MASK           (3 << 4)
+# define DP_FEC_LANE_0_SELECT              (0 << 4)
+# define DP_FEC_LANE_1_SELECT              (1 << 4)
+# define DP_FEC_LANE_2_SELECT              (2 << 4)
+# define DP_FEC_LANE_3_SELECT              (3 << 4)
+
 #define DP_AUX_FRAME_SYNC_VALUE                    0x15c   /* eDP 1.4 */
 # define DP_AUX_FRAME_SYNC_VALID           (1 << 0)
 
@@ -620,6 +640,16 @@
 #define DP_TEST_SINK                       0x270
 # define DP_TEST_SINK_START                (1 << 0)
 
+#define DP_FEC_STATUS                      0x280    /* 1.4 */
+# define DP_FEC_DECODE_EN_DETECTED         (1 << 0)
+# define DP_FEC_DECODE_DIS_DETECTED        (1 << 1)
+
+#define DP_FEC_ERROR_COUNT_LSB             0x0281    /* 1.4 */
+
+#define DP_FEC_ERROR_COUNT_MSB             0x0282    /* 1.4 */
+# define DP_FEC_ERROR_COUNT_MASK           0x7F
+# define DP_FEC_ERR_COUNT_VALID                    (1 << 7)
+
 #define DP_PAYLOAD_TABLE_UPDATE_STATUS      0x2c0   /* 1.2 MST */
 # define DP_PAYLOAD_TABLE_UPDATED           (1 << 0)
 # define DP_PAYLOAD_ACT_HANDLED             (1 << 1)