} while (0)
#define uea_enters(usb_dev) \
- uea_vdbg(usb_dev, "entering %s\n", __func__)
+ uea_vdbg(usb_dev, "entering %s\n" , __func__)
#define uea_leaves(usb_dev) \
- uea_vdbg(usb_dev, "leaving %s\n", __func__)
+ uea_vdbg(usb_dev, "leaving %s\n" , __func__)
-#define uea_err(usb_dev, format,args...) \
- dev_err(&(usb_dev)->dev ,"[UEAGLE-ATM] " format , ##args)
+#define uea_err(usb_dev, format, args...) \
+ dev_err(&(usb_dev)->dev , "[UEAGLE-ATM] " format , ##args)
-#define uea_warn(usb_dev, format,args...) \
- dev_warn(&(usb_dev)->dev ,"[Ueagle-atm] " format, ##args)
+#define uea_warn(usb_dev, format, args...) \
+ dev_warn(&(usb_dev)->dev , "[Ueagle-atm] " format, ##args)
-#define uea_info(usb_dev, format,args...) \
- dev_info(&(usb_dev)->dev ,"[ueagle-atm] " format, ##args)
+#define uea_info(usb_dev, format, args...) \
+ dev_info(&(usb_dev)->dev , "[ueagle-atm] " format, ##args)
struct intr_pkt;
#define IS_ISDN(x) \
((x)->annex & ANNEXB)
-#define INS_TO_USBDEV(ins) ins->usb_dev
+#define INS_TO_USBDEV(ins) (ins->usb_dev)
#define GET_STATUS(data) \
((data >> 8) & 0xf)
* The FW_GET_BYTE() macro is provided only for consistency.
*/
-#define FW_GET_BYTE(p) *((__u8 *) (p))
+#define FW_GET_BYTE(p) (*((__u8 *) (p)))
#define FW_DIR "ueagle-atm/"
#define UEA_FW_NAME_MAX 30
#define ACK_TIMEOUT msecs_to_jiffies(3000)
-#define UEA_INTR_IFACE_NO 0
+#define UEA_INTR_IFACE_NO 0
#define UEA_US_IFACE_NO 1
#define UEA_DS_IFACE_NO 2
#define UEA_INTR_PIPE 0x04
#define UEA_ISO_DATA_PIPE 0x08
-#define UEA_E1_SET_BLOCK 0x0001
+#define UEA_E1_SET_BLOCK 0x0001
#define UEA_E4_SET_BLOCK 0x002c
-#define UEA_SET_MODE 0x0003
+#define UEA_SET_MODE 0x0003
#define UEA_SET_2183_DATA 0x0004
#define UEA_SET_TIMEOUT 0x0011
u8 string_header[E4_L1_STRING_HEADER];
u8 page_number_to_block_index[E4_MAX_PAGE_NUMBER];
struct block_index page_header[E4_NO_SWAPPAGE_HEADERS];
- u8 code [0];
+ u8 code[0];
} __attribute__ ((packed));
/* structures describing a block within a DSP page */
#define E4_MODEMREADY 0x1
#define E1_MAKEFUNCTION(t, s) (((t) & 0xf) << 4 | ((s) & 0xf))
-#define E4_MAKEFUNCTION(t, st, s) (((t) & 0xf) << 8 | ((st) & 0xf) << 4 | ((s) & 0xf))
+#define E4_MAKEFUNCTION(t, st, s) (((t) & 0xf) << 8 | \
+ ((st) & 0xf) << 4 | ((s) & 0xf))
#define E1_MAKESA(a, b, c, d) \
(((c) & 0xff) << 24 | \
__be16 wFunction;
__be16 wOffset;
__be16 wAddress;
- __be32 dwData [6];
+ __be32 dwData[6];
} __attribute__ ((packed));
/* structures representing swap information */
static struct usb_driver uea_driver;
static DEFINE_MUTEX(uea_mutex);
-static const char *chip_name[] = {"ADI930", "Eagle I", "Eagle II", "Eagle III", "Eagle IV"};
+static const char *chip_name[] = {"ADI930", "Eagle I", "Eagle II", "Eagle III",
+ "Eagle IV"};
static int modem_index;
static unsigned int debug;
-static unsigned int altsetting[NB_MODEM] = {[0 ... (NB_MODEM - 1)] = FASTEST_ISO_INTF};
+static unsigned int altsetting[NB_MODEM] = {
+ [0 ... (NB_MODEM - 1)] = FASTEST_ISO_INTF};
static int sync_wait[NB_MODEM];
static char *cmv_file[NB_MODEM];
static int annex[NB_MODEM];
"file name with configuration and management variables");
module_param_array(annex, uint, NULL, 0644);
MODULE_PARM_DESC(annex,
- "manually set annex a/b (0=auto, 1=annex a, 2=annex b)");
+ "manually set annex a/b (0=auto, 1=annex a, 2=annex b)");
#define uea_wait(sc, cond, timeo) \
({ \
return (ret == size) ? 0 : -EIO;
}
-static void uea_upload_pre_firmware(const struct firmware *fw_entry, void *context)
+static void uea_upload_pre_firmware(const struct firmware *fw_entry,
+ void *context)
{
struct usb_device *usb = context;
const u8 *pfw;
}
ret = request_firmware_nowait(THIS_MODULE, 1, fw_name, &usb->dev,
- GFP_KERNEL, usb, uea_upload_pre_firmware);
+ GFP_KERNEL, usb,
+ uea_upload_pre_firmware);
if (ret)
uea_err(usb, "firmware %s is not available\n", fw_name);
else
if (ret < 0) {
uea_err(INS_TO_USBDEV(sc),
"requesting firmware %s failed with error %d\n",
- dsp_name, ret);
+ dsp_name, ret);
return ret;
}
blockidx = &p->page_header[blockno];
blocksize = E4_PAGE_BYTES(blockidx->PageSize);
- blockoffset = sc->dsp_firm->data + le32_to_cpu(blockidx->PageOffset);
+ blockoffset = sc->dsp_firm->data + le32_to_cpu(
+ blockidx->PageOffset);
bi.dwSize = cpu_to_be32(blocksize);
bi.dwAddress = cpu_to_be32(le32_to_cpu(blockidx->PageAddress));
uea_dbg(INS_TO_USBDEV(sc),
- "sending block %u for DSP page %u size %u address %x\n",
- blockno, pageno, blocksize, le32_to_cpu(blockidx->PageAddress));
+ "sending block %u for DSP page "
+ "%u size %u address %x\n",
+ blockno, pageno, blocksize,
+ le32_to_cpu(blockidx->PageAddress));
/* send block info through the IDMA pipe */
if (uea_idma_write(sc, &bi, E4_BLOCK_INFO_SIZE))
p = (struct l1_code *) sc->dsp_firm->data;
if (pageno >= le16_to_cpu(p->page_header[0].PageNumber)) {
- uea_err(INS_TO_USBDEV(sc), "invalid DSP page %u requested\n", pageno);
+ uea_err(INS_TO_USBDEV(sc), "invalid DSP "
+ "page %u requested\n", pageno);
return;
}
__uea_load_page_e4(sc, i, 1);
}
- uea_dbg(INS_TO_USBDEV(sc),"sending start bi\n");
+ uea_dbg(INS_TO_USBDEV(sc) , "sending start bi\n");
bi.wHdr = cpu_to_be16(UEA_BIHDR);
bi.bBootPage = 0;
uea_enters(INS_TO_USBDEV(sc));
uea_vdbg(INS_TO_USBDEV(sc), "Function : %d-%d, Address : %c%c%c%c, "
"offset : 0x%04x, data : 0x%08x\n",
- E1_FUNCTION_TYPE(function), E1_FUNCTION_SUBTYPE(function),
- E1_GETSA1(address), E1_GETSA2(address), E1_GETSA3(address),
+ E1_FUNCTION_TYPE(function),
+ E1_FUNCTION_SUBTYPE(function),
+ E1_GETSA1(address), E1_GETSA2(address),
+ E1_GETSA3(address),
E1_GETSA4(address), offset, data);
/* we send a request, but we expect a reply */
cmv.wOffsetAddress = cpu_to_le16(offset);
put_unaligned_le32(data >> 16 | data << 16, &cmv.dwData);
- ret = uea_request(sc, UEA_E1_SET_BLOCK, UEA_MPTX_START, sizeof(cmv), &cmv);
+ ret = uea_request(sc, UEA_E1_SET_BLOCK, UEA_MPTX_START,
+ sizeof(cmv), &cmv);
if (ret < 0)
return ret;
ret = wait_cmv_ack(sc);
cmv.wOffset = cpu_to_be16(offset);
cmv.dwData[0] = cpu_to_be32(data);
- ret = uea_request(sc, UEA_E4_SET_BLOCK, UEA_MPTX_START, sizeof(cmv), &cmv);
+ ret = uea_request(sc, UEA_E4_SET_BLOCK, UEA_MPTX_START,
+ sizeof(cmv), &cmv);
if (ret < 0)
return ret;
ret = wait_cmv_ack(sc);
uea_err(INS_TO_USBDEV(sc),
"reading cmv failed with error %d\n", ret);
else
- *data = sc->data;
+ *data = sc->data;
return ret;
}
static inline int uea_read_cmv_e4(struct uea_softc *sc,
u8 size, u16 group, u16 address, u16 offset, u32 *data)
{
- int ret = uea_cmv_e4(sc, E4_MAKEFUNCTION(E4_MEMACCESS, E4_REQUESTREAD, size),
+ int ret = uea_cmv_e4(sc, E4_MAKEFUNCTION(E4_MEMACCESS,
+ E4_REQUESTREAD, size),
group, address, offset, 0);
if (ret < 0)
uea_err(INS_TO_USBDEV(sc),
"reading cmv failed with error %d\n", ret);
else {
- *data = sc->data;
+ *data = sc->data;
/* size is in 16-bit word quantities */
if (size > 2)
*(data + 1) = sc->data1;
static inline int uea_write_cmv_e4(struct uea_softc *sc,
u8 size, u16 group, u16 address, u16 offset, u32 data)
{
- int ret = uea_cmv_e4(sc, E4_MAKEFUNCTION(E4_MEMACCESS, E4_REQUESTWRITE, size),
+ int ret = uea_cmv_e4(sc, E4_MAKEFUNCTION(E4_MEMACCESS,
+ E4_REQUESTWRITE, size),
group, address, offset, data);
if (ret < 0)
uea_err(INS_TO_USBDEV(sc),
return ret;
switch (sc->stats.phy.state) {
- case 0x0: /* not yet synchronized */
- case 0x1:
- case 0x3:
- case 0x4:
- uea_dbg(INS_TO_USBDEV(sc), "modem not yet synchronized\n");
- return 0;
- case 0x5: /* initialization */
- case 0x6:
- case 0x9:
- case 0xa:
- uea_dbg(INS_TO_USBDEV(sc), "modem initializing\n");
- return 0;
- case 0x2: /* fail ... */
- uea_info(INS_TO_USBDEV(sc), "modem synchronization failed"
- " (may be try other cmv/dsp)\n");
- return -EAGAIN;
- case 0x7: /* operational */
- break;
- default:
- uea_warn(INS_TO_USBDEV(sc), "unknown state: %x\n", sc->stats.phy.state);
- return 0;
+ case 0x0: /* not yet synchronized */
+ case 0x1:
+ case 0x3:
+ case 0x4:
+ uea_dbg(INS_TO_USBDEV(sc), "modem not yet "
+ "synchronized\n");
+ return 0;
+ case 0x5: /* initialization */
+ case 0x6:
+ case 0x9:
+ case 0xa:
+ uea_dbg(INS_TO_USBDEV(sc), "modem initializing\n");
+ return 0;
+ case 0x2: /* fail ... */
+ uea_info(INS_TO_USBDEV(sc), "modem synchronization "
+ "failed (may be try other cmv/dsp)\n");
+ return -EAGAIN;
+ case 0x7: /* operational */
+ break;
+ default:
+ uea_warn(INS_TO_USBDEV(sc), "unknown state: %x\n",
+ sc->stats.phy.state);
+ return 0;
}
if (data != 7) {
if (sc->stats.phy.flags) {
uea_dbg(INS_TO_USBDEV(sc), "Stat flag = 0x%x\n",
sc->stats.phy.flags);
- if (sc->stats.phy.flags & 1) //delineation LOSS
+ if (sc->stats.phy.flags & 1) /* delineation LOSS */
return -EAGAIN;
- if (sc->stats.phy.flags & 0x4000) //Reset Flag
+ if (sc->stats.phy.flags & 0x4000) /* Reset Flag */
return -EAGAIN;
return 0;
}
if (ret < 0) {
/* if caller can handle old version, try to provide it */
if (*ver == 1) {
- uea_warn(INS_TO_USBDEV(sc), "requesting firmware %s failed, "
+ uea_warn(INS_TO_USBDEV(sc), "requesting "
+ "firmware %s failed, "
"try to get older cmvs\n", cmv_name);
return request_cmvs_old(sc, cmvs, fw);
}
data = (u8 *) (*fw)->data;
if (size < 4 || strncmp(data, "cmv2", 4) != 0) {
if (*ver == 1) {
- uea_warn(INS_TO_USBDEV(sc), "firmware %s is corrupted, "
- "try to get older cmvs\n", cmv_name);
+ uea_warn(INS_TO_USBDEV(sc), "firmware %s is corrupted,"
+ " try to get older cmvs\n", cmv_name);
release_firmware(*fw);
return request_cmvs_old(sc, cmvs, fw);
}
int i, ret, len;
void *cmvs_ptr;
const struct firmware *cmvs_fw;
- int ver = 1; // we can handle v1 cmv firmware version;
+ int ver = 1; /* we can handle v1 cmv firmware version; */
/* Enter in R-IDLE (cmv) until instructed otherwise */
ret = uea_write_cmv_e1(sc, E1_SA_CNTL, 0, 1);
sc->stats.phy.firmid);
/* get options */
- ret = len = request_cmvs(sc, &cmvs_ptr, &cmvs_fw, &ver);
+ ret = len = request_cmvs(sc, &cmvs_ptr, &cmvs_fw, &ver);
if (ret < 0)
return ret;
"please update your firmware\n");
for (i = 0; i < len; i++) {
- ret = uea_write_cmv_e1(sc, get_unaligned_le32(&cmvs_v1[i].address),
- get_unaligned_le16(&cmvs_v1[i].offset),
- get_unaligned_le32(&cmvs_v1[i].data));
+ ret = uea_write_cmv_e1(sc,
+ get_unaligned_le32(&cmvs_v1[i].address),
+ get_unaligned_le16(&cmvs_v1[i].offset),
+ get_unaligned_le32(&cmvs_v1[i].data));
if (ret < 0)
goto out;
}
struct uea_cmvs_v2 *cmvs_v2 = cmvs_ptr;
for (i = 0; i < len; i++) {
- ret = uea_write_cmv_e1(sc, get_unaligned_le32(&cmvs_v2[i].address),
- (u16) get_unaligned_le32(&cmvs_v2[i].offset),
- get_unaligned_le32(&cmvs_v2[i].data));
+ ret = uea_write_cmv_e1(sc,
+ get_unaligned_le32(&cmvs_v2[i].address),
+ (u16) get_unaligned_le32(&cmvs_v2[i].offset),
+ get_unaligned_le32(&cmvs_v2[i].data));
if (ret < 0)
goto out;
}
/* Enter in R-ACT-REQ */
ret = uea_write_cmv_e1(sc, E1_SA_CNTL, 0, 2);
uea_vdbg(INS_TO_USBDEV(sc), "Entering in R-ACT-REQ state\n");
- uea_info(INS_TO_USBDEV(sc), "modem started, waiting synchronization...\n");
+ uea_info(INS_TO_USBDEV(sc), "modem started, waiting "
+ "synchronization...\n");
out:
release_firmware(cmvs_fw);
return ret;
int i, ret, len;
void *cmvs_ptr;
const struct firmware *cmvs_fw;
- int ver = 2; // we can only handle v2 cmv firmware version;
+ int ver = 2; /* we can only handle v2 cmv firmware version; */
/* Enter in R-IDLE (cmv) until instructed otherwise */
ret = uea_write_cmv_e4(sc, 1, E4_SA_CNTL, 0, 0, 1);
/* get options */
- ret = len = request_cmvs(sc, &cmvs_ptr, &cmvs_fw, &ver);
+ ret = len = request_cmvs(sc, &cmvs_ptr, &cmvs_fw, &ver);
if (ret < 0)
return ret;
for (i = 0; i < len; i++) {
ret = uea_write_cmv_e4(sc, 1,
- get_unaligned_le32(&cmvs_v2[i].group),
- get_unaligned_le32(&cmvs_v2[i].address),
- get_unaligned_le32(&cmvs_v2[i].offset),
- get_unaligned_le32(&cmvs_v2[i].data));
+ get_unaligned_le32(&cmvs_v2[i].group),
+ get_unaligned_le32(&cmvs_v2[i].address),
+ get_unaligned_le32(&cmvs_v2[i].offset),
+ get_unaligned_le32(&cmvs_v2[i].data));
if (ret < 0)
goto out;
}
/* Enter in R-ACT-REQ */
ret = uea_write_cmv_e4(sc, 1, E4_SA_CNTL, 0, 0, 2);
uea_vdbg(INS_TO_USBDEV(sc), "Entering in R-ACT-REQ state\n");
- uea_info(INS_TO_USBDEV(sc), "modem started, waiting synchronization...\n");
+ uea_info(INS_TO_USBDEV(sc), "modem started, waiting "
+ "synchronization...\n");
out:
release_firmware(cmvs_fw);
return ret;
uea_request(sc, UEA_SET_MODE, UEA_LOOPBACK_ON, 0, NULL);
uea_request(sc, UEA_SET_MODE, UEA_BOOT_IDMA, 0, NULL);
- /* enter reset mode */
+ /* enter reset mode */
uea_request(sc, UEA_SET_MODE, UEA_START_RESET, 0, NULL);
/* original driver use 200ms, but windows driver use 100ms */
uea_request(sc, UEA_SET_MODE, UEA_END_RESET, 0, NULL);
if (UEA_CHIP_VERSION(sc) != EAGLE_IV) {
- /* clear tx and rx mailboxes */
+ /* clear tx and rx mailboxes */
uea_request(sc, UEA_SET_2183_DATA, UEA_MPTX_MAILBOX, 2, &zero);
uea_request(sc, UEA_SET_2183_DATA, UEA_MPRX_MAILBOX, 2, &zero);
uea_request(sc, UEA_SET_2183_DATA, UEA_SWAP_MAILBOX, 2, &zero);
return ret;
if (UEA_CHIP_VERSION(sc) == EAGLE_IV)
- sc->cmv_dsc.e4.function = E4_MAKEFUNCTION(E4_ADSLDIRECTIVE, E4_MODEMREADY, 1);
+ sc->cmv_dsc.e4.function = E4_MAKEFUNCTION(E4_ADSLDIRECTIVE,
+ E4_MODEMREADY, 1);
else
- sc->cmv_dsc.e1.function = E1_MAKEFUNCTION(E1_ADSLDIRECTIVE, E1_MODEMREADY);
+ sc->cmv_dsc.e1.function = E1_MAKEFUNCTION(E1_ADSLDIRECTIVE,
+ E1_MODEMREADY);
/* demask interrupt */
sc->booting = 0;
value = 0;
ret = uea_send_modem_cmd(sc->usb_dev, 0xe, 1, &value);
if (ret < 0)
- uea_err(sc->usb_dev, "elsa de-assert failed with error %d\n", ret);
+ uea_err(sc->usb_dev, "elsa de-assert failed with error"
+ " %d\n", ret);
err1:
release_firmware(fw_entry);
if (UEA_CHIP_VERSION(sc) == ADI930
&& cmv->bFunction == E1_MAKEFUNCTION(2, 2)) {
cmv->wIndex = cpu_to_le16(dsc->idx);
- put_unaligned_le32(dsc->address, &cmv->dwSymbolicAddress);
+ put_unaligned_le32(dsc->address,
+ &cmv->dwSymbolicAddress);
cmv->wOffsetAddress = cpu_to_le16(dsc->offset);
} else
goto bad2;
}
- if (cmv->bFunction == E1_MAKEFUNCTION(E1_ADSLDIRECTIVE, E1_MODEMREADY)) {
+ if (cmv->bFunction == E1_MAKEFUNCTION(E1_ADSLDIRECTIVE,
+ E1_MODEMREADY)) {
wake_up_cmv_ack(sc);
uea_leaves(INS_TO_USBDEV(sc));
return;
if (be16_to_cpu(cmv->wFunction) != dsc->function)
goto bad2;
- if (be16_to_cpu(cmv->wFunction) == E4_MAKEFUNCTION(E4_ADSLDIRECTIVE, E4_MODEMREADY, 1)) {
+ if (be16_to_cpu(cmv->wFunction) == E4_MAKEFUNCTION(E4_ADSLDIRECTIVE,
+ E4_MODEMREADY, 1)) {
wake_up_cmv_ack(sc);
uea_leaves(INS_TO_USBDEV(sc));
return;
return;
}
-static void uea_schedule_load_page_e1(struct uea_softc *sc, struct intr_pkt *intr)
+static void uea_schedule_load_page_e1(struct uea_softc *sc,
+ struct intr_pkt *intr)
{
sc->pageno = intr->e1_bSwapPageNo;
sc->ovl = intr->e1_bOvl >> 4 | intr->e1_bOvl << 4;
queue_work(sc->work_q, &sc->task);
}
-static void uea_schedule_load_page_e4(struct uea_softc *sc, struct intr_pkt *intr)
+static void uea_schedule_load_page_e4(struct uea_softc *sc,
+ struct intr_pkt *intr)
{
sc->pageno = intr->e4_bSwapPageNo;
queue_work(sc->work_q, &sc->task);
static DEVICE_ATTR(stat_status, S_IWUGO | S_IRUGO, read_status, reboot);
-static ssize_t read_human_status(struct device *dev, struct device_attribute *attr,
- char *buf)
+static ssize_t read_human_status(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
int ret = -ENODEV;
int modem_state;
case 0xa:
modem_state = 1;
break;
- case 0x7: /* operational */
+ case 0x7: /* operational */
modem_state = 2;
break;
case 0x2: /* fail ... */
return ret;
}
-static DEVICE_ATTR(stat_human_status, S_IWUGO | S_IRUGO, read_human_status, NULL);
+static DEVICE_ATTR(stat_human_status, S_IWUGO | S_IRUGO,
+ read_human_status, NULL);
static ssize_t read_delin(struct device *dev, struct device_attribute *attr,
char *buf)
static DEVICE_ATTR(stat_delin, S_IWUGO | S_IRUGO, read_delin, NULL);
-#define UEA_ATTR(name, reset) \
+#define UEA_ATTR(name, reset) \
\
-static ssize_t read_##name(struct device *dev, \
+static ssize_t read_##name(struct device *dev, \
struct device_attribute *attr, char *buf) \
-{ \
- int ret = -ENODEV; \
- struct uea_softc *sc; \
- \
- mutex_lock(&uea_mutex); \
+{ \
+ int ret = -ENODEV; \
+ struct uea_softc *sc; \
+ \
+ mutex_lock(&uea_mutex); \
sc = dev_to_uea(dev); \
- if (!sc) \
- goto out; \
+ if (!sc) \
+ goto out; \
ret = snprintf(buf, 10, "%08x\n", sc->stats.phy.name); \
if (reset) \
sc->stats.phy.name = 0; \
-out: \
- mutex_unlock(&uea_mutex); \
- return ret; \
-} \
+out: \
+ mutex_unlock(&uea_mutex); \
+ return ret; \
+} \
\
static DEVICE_ATTR(stat_##name, S_IRUGO, read_##name, NULL)
else if (sc->driver_info & AUTO_ANNEX_B)
sc->annex = ANNEXB;
else
- sc->annex = (le16_to_cpu(sc->usb_dev->descriptor.bcdDevice) & 0x80)?ANNEXB:ANNEXA;
+ sc->annex = (le16_to_cpu
+ (sc->usb_dev->descriptor.bcdDevice) & 0x80) ? ANNEXB : ANNEXA;
alt = altsetting[sc->modem_index];
/* ADI930 don't support iso */
if (UEA_CHIP_VERSION(id) != ADI930 && alt > 0) {
- if (alt <= 8 && usb_set_interface(usb, UEA_DS_IFACE_NO, alt) == 0) {
+ if (alt <= 8 &&
+ usb_set_interface(usb, UEA_DS_IFACE_NO, alt) == 0) {
uea_dbg(usb, "set alternate %u for 2 interface\n", alt);
uea_info(usb, "using iso mode\n");
usbatm->flags |= UDSL_USE_ISOC | UDSL_IGNORE_EILSEQ;
* List of supported VID/PID
*/
static const struct usb_device_id uea_ids[] = {
- {USB_DEVICE(ANALOG_VID, ADI930_PID_PREFIRM), .driver_info = ADI930 | PREFIRM},
- {USB_DEVICE(ANALOG_VID, ADI930_PID_PSTFIRM), .driver_info = ADI930 | PSTFIRM},
- {USB_DEVICE(ANALOG_VID, EAGLE_I_PID_PREFIRM), .driver_info = EAGLE_I | PREFIRM},
- {USB_DEVICE(ANALOG_VID, EAGLE_I_PID_PSTFIRM), .driver_info = EAGLE_I | PSTFIRM},
- {USB_DEVICE(ANALOG_VID, EAGLE_II_PID_PREFIRM), .driver_info = EAGLE_II | PREFIRM},
- {USB_DEVICE(ANALOG_VID, EAGLE_II_PID_PSTFIRM), .driver_info = EAGLE_II | PSTFIRM},
- {USB_DEVICE(ANALOG_VID, EAGLE_IIC_PID_PREFIRM), .driver_info = EAGLE_II | PREFIRM},
- {USB_DEVICE(ANALOG_VID, EAGLE_IIC_PID_PSTFIRM), .driver_info = EAGLE_II | PSTFIRM},
- {USB_DEVICE(ANALOG_VID, EAGLE_III_PID_PREFIRM), .driver_info = EAGLE_III | PREFIRM},
- {USB_DEVICE(ANALOG_VID, EAGLE_III_PID_PSTFIRM), .driver_info = EAGLE_III | PSTFIRM},
- {USB_DEVICE(ANALOG_VID, EAGLE_IV_PID_PREFIRM), .driver_info = EAGLE_IV | PREFIRM},
- {USB_DEVICE(ANALOG_VID, EAGLE_IV_PID_PSTFIRM), .driver_info = EAGLE_IV | PSTFIRM},
- {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_I_A_PID_PREFIRM), .driver_info = EAGLE_I | PREFIRM},
- {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_I_A_PID_PSTFIRM), .driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_A},
- {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_I_B_PID_PREFIRM), .driver_info = EAGLE_I | PREFIRM},
- {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_I_B_PID_PSTFIRM), .driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_B},
- {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_II_A_PID_PREFIRM), .driver_info = EAGLE_II | PREFIRM},
- {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_II_A_PID_PSTFIRM), .driver_info = EAGLE_II | PSTFIRM | AUTO_ANNEX_A},
- {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_II_B_PID_PREFIRM), .driver_info = EAGLE_II | PREFIRM},
- {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_II_B_PID_PSTFIRM), .driver_info = EAGLE_II | PSTFIRM | AUTO_ANNEX_B},
- {USB_DEVICE(ELSA_VID, ELSA_PID_PREFIRM), .driver_info = ADI930 | PREFIRM},
- {USB_DEVICE(ELSA_VID, ELSA_PID_PSTFIRM), .driver_info = ADI930 | PSTFIRM},
- {USB_DEVICE(ELSA_VID, ELSA_PID_A_PREFIRM), .driver_info = ADI930 | PREFIRM},
- {USB_DEVICE(ELSA_VID, ELSA_PID_A_PSTFIRM), .driver_info = ADI930 | PSTFIRM | AUTO_ANNEX_A},
- {USB_DEVICE(ELSA_VID, ELSA_PID_B_PREFIRM), .driver_info = ADI930 | PREFIRM},
- {USB_DEVICE(ELSA_VID, ELSA_PID_B_PSTFIRM), .driver_info = ADI930 | PSTFIRM | AUTO_ANNEX_B},
- {USB_DEVICE(USR_VID, MILLER_A_PID_PREFIRM), .driver_info = EAGLE_I | PREFIRM},
- {USB_DEVICE(USR_VID, MILLER_A_PID_PSTFIRM), .driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_A},
- {USB_DEVICE(USR_VID, MILLER_B_PID_PREFIRM), .driver_info = EAGLE_I | PREFIRM},
- {USB_DEVICE(USR_VID, MILLER_B_PID_PSTFIRM), .driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_B},
- {USB_DEVICE(USR_VID, HEINEKEN_A_PID_PREFIRM),.driver_info = EAGLE_I | PREFIRM},
- {USB_DEVICE(USR_VID, HEINEKEN_A_PID_PSTFIRM),.driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_A},
- {USB_DEVICE(USR_VID, HEINEKEN_B_PID_PREFIRM),.driver_info = EAGLE_I | PREFIRM},
- {USB_DEVICE(USR_VID, HEINEKEN_B_PID_PSTFIRM),.driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_B},
+ {USB_DEVICE(ANALOG_VID, ADI930_PID_PREFIRM),
+ .driver_info = ADI930 | PREFIRM},
+ {USB_DEVICE(ANALOG_VID, ADI930_PID_PSTFIRM),
+ .driver_info = ADI930 | PSTFIRM},
+ {USB_DEVICE(ANALOG_VID, EAGLE_I_PID_PREFIRM),
+ .driver_info = EAGLE_I | PREFIRM},
+ {USB_DEVICE(ANALOG_VID, EAGLE_I_PID_PSTFIRM),
+ .driver_info = EAGLE_I | PSTFIRM},
+ {USB_DEVICE(ANALOG_VID, EAGLE_II_PID_PREFIRM),
+ .driver_info = EAGLE_II | PREFIRM},
+ {USB_DEVICE(ANALOG_VID, EAGLE_II_PID_PSTFIRM),
+ .driver_info = EAGLE_II | PSTFIRM},
+ {USB_DEVICE(ANALOG_VID, EAGLE_IIC_PID_PREFIRM),
+ .driver_info = EAGLE_II | PREFIRM},
+ {USB_DEVICE(ANALOG_VID, EAGLE_IIC_PID_PSTFIRM),
+ .driver_info = EAGLE_II | PSTFIRM},
+ {USB_DEVICE(ANALOG_VID, EAGLE_III_PID_PREFIRM),
+ .driver_info = EAGLE_III | PREFIRM},
+ {USB_DEVICE(ANALOG_VID, EAGLE_III_PID_PSTFIRM),
+ .driver_info = EAGLE_III | PSTFIRM},
+ {USB_DEVICE(ANALOG_VID, EAGLE_IV_PID_PREFIRM),
+ .driver_info = EAGLE_IV | PREFIRM},
+ {USB_DEVICE(ANALOG_VID, EAGLE_IV_PID_PSTFIRM),
+ .driver_info = EAGLE_IV | PSTFIRM},
+ {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_I_A_PID_PREFIRM),
+ .driver_info = EAGLE_I | PREFIRM},
+ {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_I_A_PID_PSTFIRM),
+ .driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_A},
+ {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_I_B_PID_PREFIRM),
+ .driver_info = EAGLE_I | PREFIRM},
+ {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_I_B_PID_PSTFIRM),
+ .driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_B},
+ {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_II_A_PID_PREFIRM),
+ .driver_info = EAGLE_II | PREFIRM},
+ {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_II_A_PID_PSTFIRM),
+ .driver_info = EAGLE_II | PSTFIRM | AUTO_ANNEX_A},
+ {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_II_B_PID_PREFIRM),
+ .driver_info = EAGLE_II | PREFIRM},
+ {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_II_B_PID_PSTFIRM),
+ .driver_info = EAGLE_II | PSTFIRM | AUTO_ANNEX_B},
+ {USB_DEVICE(ELSA_VID, ELSA_PID_PREFIRM),
+ .driver_info = ADI930 | PREFIRM},
+ {USB_DEVICE(ELSA_VID, ELSA_PID_PSTFIRM),
+ .driver_info = ADI930 | PSTFIRM},
+ {USB_DEVICE(ELSA_VID, ELSA_PID_A_PREFIRM),
+ .driver_info = ADI930 | PREFIRM},
+ {USB_DEVICE(ELSA_VID, ELSA_PID_A_PSTFIRM),
+ .driver_info = ADI930 | PSTFIRM | AUTO_ANNEX_A},
+ {USB_DEVICE(ELSA_VID, ELSA_PID_B_PREFIRM),
+ .driver_info = ADI930 | PREFIRM},
+ {USB_DEVICE(ELSA_VID, ELSA_PID_B_PSTFIRM),
+ .driver_info = ADI930 | PSTFIRM | AUTO_ANNEX_B},
+ {USB_DEVICE(USR_VID, MILLER_A_PID_PREFIRM),
+ .driver_info = EAGLE_I | PREFIRM},
+ {USB_DEVICE(USR_VID, MILLER_A_PID_PSTFIRM),
+ .driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_A},
+ {USB_DEVICE(USR_VID, MILLER_B_PID_PREFIRM),
+ .driver_info = EAGLE_I | PREFIRM},
+ {USB_DEVICE(USR_VID, MILLER_B_PID_PSTFIRM),
+ .driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_B},
+ {USB_DEVICE(USR_VID, HEINEKEN_A_PID_PREFIRM),
+ .driver_info = EAGLE_I | PREFIRM},
+ {USB_DEVICE(USR_VID, HEINEKEN_A_PID_PSTFIRM),
+ .driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_A},
+ {USB_DEVICE(USR_VID, HEINEKEN_B_PID_PREFIRM),
+ .driver_info = EAGLE_I | PREFIRM},
+ {USB_DEVICE(USR_VID, HEINEKEN_B_PID_PSTFIRM),
+ .driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_B},
{}
};
projects / openwrt / staging / blogic.git / commitdiff