}
err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
- EXT_CSD_BKOPS_START, 1, timeout, use_busy_signal, true);
+ EXT_CSD_BKOPS_START, 1, timeout,
+ use_busy_signal, true, false);
if (err) {
pr_warn("%s: Error %d starting bkops\n",
mmc_hostname(card->host), err);
/* switch to HS200 mode if bus width set successfully */
if (!err)
- err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
- EXT_CSD_HS_TIMING, 2, 0);
+ err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+ EXT_CSD_HS_TIMING, 2, 0, true, true, true);
err:
return err;
}
host->caps2 & MMC_CAP2_HS200)
err = mmc_select_hs200(card);
else if (host->caps & MMC_CAP_MMC_HIGHSPEED)
- err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
- EXT_CSD_HS_TIMING, 1,
- card->ext_csd.generic_cmd6_time);
+ err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+ EXT_CSD_HS_TIMING, 1,
+ card->ext_csd.generic_cmd6_time,
+ true, true, true);
if (err && err != -EBADMSG)
goto free_card;
err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_POWER_OFF_NOTIFICATION,
- notify_type, timeout, true, false);
+ notify_type, timeout, true, false, false);
if (err)
pr_err("%s: Power Off Notification timed out, %u\n",
mmc_hostname(card->host), timeout);
* timeout of zero implies maximum possible timeout
* @use_busy_signal: use the busy signal as response type
* @send_status: send status cmd to poll for busy
+ * @ignore_crc: ignore CRC errors when sending status cmd to poll for busy
*
* Modifies the EXT_CSD register for selected card.
*/
int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
- unsigned int timeout_ms, bool use_busy_signal, bool send_status)
+ unsigned int timeout_ms, bool use_busy_signal, bool send_status,
+ bool ignore_crc)
{
int err;
struct mmc_command cmd = {0};
unsigned long timeout;
u32 status = 0;
- bool ignore_crc = false;
BUG_ON(!card);
BUG_ON(!card->host);
return 0;
/*
- * Must check status to be sure of no errors
- * If CMD13 is to check the busy completion of the timing change,
- * disable the check of CRC error.
+ * CRC errors shall only be ignored in cases were CMD13 is used to poll
+ * to detect busy completion.
*/
- if (index == EXT_CSD_HS_TIMING &&
- !(card->host->caps & MMC_CAP_WAIT_WHILE_BUSY))
- ignore_crc = true;
+ if (card->host->caps & MMC_CAP_WAIT_WHILE_BUSY)
+ ignore_crc = false;
+ /* Must check status to be sure of no errors. */
timeout = jiffies + msecs_to_jiffies(MMC_OPS_TIMEOUT_MS);
do {
if (send_status) {
int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
unsigned int timeout_ms)
{
- return __mmc_switch(card, set, index, value, timeout_ms, true, true);
+ return __mmc_switch(card, set, index, value, timeout_ms, true, true,
+ false);
}
EXPORT_SYMBOL_GPL(mmc_switch);
struct mmc_command *, int);
extern void mmc_start_bkops(struct mmc_card *card, bool from_exception);
extern int __mmc_switch(struct mmc_card *, u8, u8, u8, unsigned int, bool,
- bool);
+ bool, bool);
extern int mmc_switch(struct mmc_card *, u8, u8, u8, unsigned int);
extern int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd);