can: at91_can: don't align struct definitions

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c
index 74efb5a2ad4177dd93a991c8699c3b414163b443..8f15ae4c719fa6cae6689e11d787f47e184c1898 100644 (file)
--- a/drivers/net/can/at91_can.c
+++ b/drivers/net/can/at91_can.c
@@ -157,21 +157,21 @@ enum at91_mb_mode {
 #define AT91_IRQ_ALL           (0x1fffffff)
 
 struct at91_priv {
-       struct can_priv         can;       /* must be the first member! */
-       struct net_device       *dev;
-       struct napi_struct      napi;
+       struct can_priv can;            /* must be the first member! */
+       struct net_device *dev;
+       struct napi_struct napi;
 
-       void __iomem            *reg_base;
+       void __iomem *reg_base;
 
-       u32                     reg_sr;
-       unsigned int            tx_next;
-       unsigned int            tx_echo;
-       unsigned int            rx_next;
+       u32 reg_sr;
+       unsigned int tx_next;
+       unsigned int tx_echo;
+       unsigned int rx_next;
 
-       struct clk              *clk;
-       struct at91_can_data    *pdata;
+       struct clk *clk;
+       struct at91_can_data *pdata;
 
-       canid_t                 mb0_id;
+       canid_t mb0_id;
 };
 
 static struct can_bittiming_const at91_bittiming_const = {
@@ -271,7 +271,7 @@ static void at91_setup_mailboxes(struct net_device *dev)
 
        /* reset acceptance mask and id register */
        for (i = AT91_MB_RX_FIRST; i <= AT91_MB_RX_LAST; i++) {
-               at91_write(priv, AT91_MAM(i), 0x0 );
+               at91_write(priv, AT91_MAM(i), 0x0);
                at91_write(priv, AT91_MID(i), AT91_MID_MIDE);
        }
 
@@ -1231,11 +1231,11 @@ static int __devexit at91_can_remove(struct platform_device *pdev)
 }
 
 static struct platform_driver at91_can_driver = {
-       .probe          = at91_can_probe,
-       .remove         = __devexit_p(at91_can_remove),
-       .driver         = {
-               .name   = KBUILD_MODNAME,
-               .owner  = THIS_MODULE,
+       .probe = at91_can_probe,
+       .remove = __devexit_p(at91_can_remove),
+       .driver = {
+               .name = KBUILD_MODNAME,
+               .owner = THIS_MODULE,
        },
 };