This patch adds support for esd gmbh OTC570 board.
The OTC570 is based on an Atmel AT91SAM9263 SoC.
Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
meesc ARM926EJS (AT91SAM9263 SoC)
+ otc570 ARM926EJS (AT91SAM9263 SoC)
Sedji Gaouaou<sedji.gaouaou@atmel.com>
at91sam9g10ek ARM926EJS (AT91SAM9G10 SoC)
meesc \
mp2usb \
m501sk \
+ otc570 \
pm9261 \
pm9263 \
SBC35_A9G20 \
fi;
@$(MKCONFIG) -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91
+otc570_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs otc570 esd at91
+
pm9263_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91
--- /dev/null
+#
+# (C) Copyright 2003-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Stelian Pop <stelian.pop@leadtechdesign.com>
+# Lead Tech Design <www.leadtechdesign.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS-y += $(BOARD).o
+COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS-y))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+TEXT_BASE = 0x23f00000
--- /dev/null
+/*
+ * (C) Copyright 2010
+ * Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
+ * esd electronic system design gmbh <www.esd.eu>
+ *
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91sam9263.h>
+#include <asm/arch/at91sam9_matrix.h>
+#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/io.h>
+#include <atmel_lcdc.h>
+#include <lcd.h>
+#include <netdev.h>
+#ifdef CONFIG_LCD_INFO
+#include <nand.h>
+#include <version.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+static int hw_rev = -1; /* hardware revision */
+
+int get_hw_rev(void)
+{
+ if (hw_rev >= 0)
+ return hw_rev;
+
+ hw_rev = at91_get_gpio_value(AT91_PIN_PB19);
+ hw_rev |= at91_get_gpio_value(AT91_PIN_PB20) << 1;
+ hw_rev |= at91_get_gpio_value(AT91_PIN_PB21) << 2;
+ hw_rev |= at91_get_gpio_value(AT91_PIN_PB22) << 3;
+
+ if (hw_rev == 15)
+ hw_rev = 0;
+
+ return hw_rev;
+}
+
+#ifdef CONFIG_CMD_NAND
+static void otc570_nand_hw_init(void)
+{
+ unsigned long csa;
+
+ /* Enable CS3 */
+ csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
+ at91_sys_write(AT91_MATRIX_EBI0CSA,
+ csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA);
+
+ /* Configure SMC CS3 for NAND/SmartMedia */
+ at91_sys_write(AT91_SMC_SETUP(3),
+ AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) |
+ AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
+ at91_sys_write(AT91_SMC_PULSE(3),
+ AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) |
+ AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
+ at91_sys_write(AT91_SMC_CYCLE(3),
+ AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
+ at91_sys_write(AT91_SMC_MODE(3),
+ AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+ AT91_SMC_EXNWMODE_DISABLE |
+ AT91_SMC_DBW_8 |
+ AT91_SMC_TDF_(2));
+
+ /* Configure RDY/BSY */
+ at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+
+ /* Enable NandFlash */
+ at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+}
+#endif /* CONFIG_CMD_NAND */
+
+#ifdef CONFIG_MACB
+static void otc570_macb_hw_init(void)
+{
+ /* Enable clock */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_EMAC);
+ at91_macb_hw_init();
+}
+#endif
+
+/*
+ * Static memory controller initialization to enable Beckhoff ET1100 EtherCAT
+ * controller debugging
+ * The ET1100 is located at physical address 0x70000000
+ * Its process memory is located at physical address 0x70001000
+ */
+static void otc570_ethercat_hw_init(void)
+{
+ /* Configure SMC EBI1_CS0 for EtherCAT */
+ at91_sys_write(AT91_SMC1_SETUP(0),
+ AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) |
+ AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
+ at91_sys_write(AT91_SMC1_PULSE(0),
+ AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(9) |
+ AT91_SMC_NRDPULSE_(5) | AT91_SMC_NCS_RDPULSE_(9));
+ at91_sys_write(AT91_SMC1_CYCLE(0),
+ AT91_SMC_NWECYCLE_(10) | AT91_SMC_NRDCYCLE_(6));
+ /*
+ * Configure behavior at external wait signal, byte-select mode, 16 bit
+ * data bus width, none data float wait states and TDF optimization
+ */
+ at91_sys_write(AT91_SMC1_MODE(0),
+ AT91_SMC_READMODE | AT91_SMC_EXNWMODE_READY |
+ AT91_SMC_BAT_SELECT | AT91_SMC_DBW_16 | AT91_SMC_TDF_(0) |
+ AT91_SMC_TDFMODE);
+
+ /* Configure RDY/BSY */
+ at91_set_B_periph(AT91_PIN_PE20, 0); /* EBI1_NWAIT */
+}
+
+#ifdef CONFIG_LCD
+/* Number of columns and rows, pixel clock in Hz and hsync/vsync polarity */
+vidinfo_t panel_info = {
+ .vl_col = 640,
+ .vl_row = 480,
+ .vl_clk = 25175000,
+ .vl_sync = ATMEL_LCDC_INVLINE_INVERTED |
+ ATMEL_LCDC_INVFRAME_INVERTED,
+
+ .vl_bpix = 3, /* Bits per pixel, 0 = 1bit, 3 = 8bit */
+ .vl_tft = 1, /* 0 = passive, 1 = TFT */
+ .vl_vsync_len = 1, /* Length of vertical sync in NOL */
+ .vl_upper_margin = 35, /* Idle lines at the frame start */
+ .vl_lower_margin = 5, /* Idle lines at the end of the frame */
+ .vl_hsync_len = 5, /* Width of the LCDHSYNC pulse */
+ .vl_left_margin = 112, /* Idle cycles at the line beginning */
+ .vl_right_margin = 1, /* Idle cycles at the end of the line */
+
+ .mmio = AT91SAM9263_LCDC_BASE,
+};
+
+void lcd_enable(void)
+{
+ at91_set_gpio_value(AT91_PIN_PA30, 0); /* power up */
+}
+
+void lcd_disable(void)
+{
+ at91_set_gpio_value(AT91_PIN_PA30, 1); /* power down */
+}
+
+static void otc570_lcd_hw_init(void)
+{
+ at91_set_A_periph(AT91_PIN_PC0, 0); /* LCDVSYNC */
+ at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */
+ at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */
+ at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */
+ at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */
+ at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */
+ at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */
+ at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */
+ at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */
+ at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */
+ at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */
+ at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */
+ at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */
+ at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */
+ at91_set_B_periph(AT91_PIN_PC12, 0); /* LCDD13 */
+ at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */
+ at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */
+ at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */
+ at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */
+ at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */
+ at91_set_B_periph(AT91_PIN_PC17, 0); /* LCDD21 */
+ at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */
+ at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */
+ at91_set_gpio_output(AT91_PIN_PA30, 1); /* PCI */
+
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_LCDC);
+
+ gd->fb_base = CONFIG_OTC570_LCD_BASE;
+}
+
+#ifdef CONFIG_LCD_INFO
+void lcd_show_board_info(void)
+{
+ ulong dram_size, nand_size;
+ int i;
+ char temp[32];
+
+ dram_size = 0;
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
+ dram_size += gd->bd->bi_dram[i].size;
+ nand_size = 0;
+ for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
+ nand_size += nand_info[i].size;
+
+ lcd_printf("\n%s\n", U_BOOT_VERSION);
+ lcd_printf("%s CPU at %s MHz\n", AT91_CPU_NAME,
+ strmhz(temp, get_cpu_clk_rate()));
+ lcd_printf(" %ld MB SDRAM, %ld MB NAND\n",
+ dram_size >> 20,
+ nand_size >> 20 );
+ lcd_printf(" Board : esd ARM9 HMI Panel - OTC570\n");
+ lcd_printf(" Hardware-revision: 1.%d\n", get_hw_rev());
+ lcd_printf(" Mach-type : %lu\n", gd->bd->bi_arch_number);
+}
+#endif /* CONFIG_LCD_INFO */
+#endif /* CONFIG_LCD */
+
+int dram_init(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM;
+ gd->bd->bi_dram[0].size = get_ram_size((long *) PHYS_SDRAM, (1 << 27));
+ return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+ int rc = 0;
+#ifdef CONFIG_MACB
+ rc = macb_eth_initialize(0, (void *)AT91SAM9263_BASE_EMAC, 0x00);
+#endif
+ return rc;
+}
+
+int checkboard(void)
+{
+ char str[32];
+
+ puts("Board: esd ARM9 HMI Panel - OTC570");
+ if (getenv_r("serial#", str, sizeof(str)) > 0) {
+ puts(", serial# ");
+ puts(str);
+ }
+ printf("\nHardware-revision: 1.%d\n", get_hw_rev());
+ printf("Mach-type: %lu\n", gd->bd->bi_arch_number);
+ return 0;
+}
+
+#ifdef CONFIG_SERIAL_TAG
+void get_board_serial(struct tag_serialnr *serialnr)
+{
+ char *str;
+
+ char *serial = getenv("serial#");
+ if (serial) {
+ str = strchr(serial, '_');
+ if (str && (strlen(str) >= 4)) {
+ serialnr->high = (*(str + 1) << 8) | *(str + 2);
+ serialnr->low = simple_strtoul(str + 3, NULL, 16);
+ }
+ } else {
+ serialnr->high = 0;
+ serialnr->low = 0;
+ }
+}
+#endif
+
+#ifdef CONFIG_REVISION_TAG
+u32 get_board_rev(void)
+{
+ return hw_rev | 0x100;
+}
+#endif
+
+#ifdef CONFIG_MISC_INIT_R
+int misc_init_r(void)
+{
+ char str[64];
+
+ at91_set_gpio_output(AT91_PIN_PA29, 1);
+ at91_set_A_periph(AT91_PIN_PA26, 1); /* TXD0 */
+ at91_set_A_periph(AT91_PIN_PA27, 0); /* RXD0 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_US0);
+ /* Set USART_MODE = 1 (RS485) */
+ at91_sys_write((0xFFF8C004 - AT91_BASE_SYS), 1);
+
+ printf("USART0: ");
+
+ if (getenv_r("usart0", str, sizeof(str)) == -1) {
+ printf("No entry - assuming 1-wire\n");
+ /* CTS pin, works as mode select pin (0 = 1-wire; 1 = RS485) */
+ at91_set_gpio_output(AT91_PIN_PA29, 0);
+ } else {
+ if (strcmp(str, "1-wire") == 0) {
+ printf("%s\n", str);
+ at91_set_gpio_output(AT91_PIN_PA29, 0);
+ } else if (strcmp(str, "rs485") == 0) {
+ printf("%s\n", str);
+ at91_set_gpio_output(AT91_PIN_PA29, 1);
+ } else {
+ printf("Wrong entry - assuming 1-wire ");
+ printf("(valid values are '1-wire' or 'rs485')\n");
+ at91_set_gpio_output(AT91_PIN_PA29, 0);
+ }
+ }
+ printf("Display memory address: 0x%08lX\n", gd->fb_base);
+
+ return 0;
+}
+#endif /* CONFIG_MISC_INIT_R */
+
+int board_init(void)
+{
+ /* Peripheral Clock Enable Register */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_PIOA |
+ 1 << AT91SAM9263_ID_PIOB |
+ 1 << AT91SAM9263_ID_PIOCDE |
+ 1 << AT91SAM9263_ID_TWI |
+ 1 << AT91SAM9263_ID_SPI0 |
+ 1 << AT91SAM9263_ID_LCDC |
+ 1 << AT91SAM9263_ID_UHP);
+
+ /* arch number of OTC570-Board */
+ gd->bd->bi_arch_number = MACH_TYPE_OTC570;
+
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+ at91_serial_hw_init();
+#ifdef CONFIG_CMD_NAND
+ otc570_nand_hw_init();
+#endif
+ otc570_ethercat_hw_init();
+#ifdef CONFIG_HAS_DATAFLASH
+ at91_spi0_hw_init(1 << 0);
+#endif
+#ifdef CONFIG_MACB
+ otc570_macb_hw_init();
+#endif
+#ifdef CONFIG_AT91_CAN
+ at91_can_hw_init();
+#endif
+#ifdef CONFIG_USB_OHCI_NEW
+ at91_uhp_hw_init();
+#endif
+#ifdef CONFIG_LCD
+ otc570_lcd_hw_init();
+#endif
+ return 0;
+}
--- /dev/null
+/*
+ * (C) Copyright 2008
+ * Ulf Samuelsson <ulf@atmel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+#include <common.h>
+#include <config.h>
+#include <asm/hardware.h>
+#include <dataflash.h>
+
+AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
+
+struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
+ {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
+};
+
+/* define the area offsets */
+dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
+ {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"},
+ {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"},
+ {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"},
+};
--- /dev/null
+/*
+ * (C) Copyright 2010
+ * Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
+ * esd electronic system design gmbh <www.esd.eu>
+ *
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * Configuation settings for the esd OTC570 board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* Common stuff */
+#define CONFIG_OTC570 1 /* Board is esd OTC570 */
+#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
+#define CONFIG_AT91SAM9263 1 /* It's an AT91SAM9263 SoC */
+#define CONFIG_SYS_HZ 1000 /* decrementer freq */
+#define CONFIG_DISPLAY_BOARDINFO 1
+#define CONFIG_DISPLAY_CPUINFO 1 /* display cpu info and speed */
+#define CONFIG_PREBOOT /* enable preboot variable */
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+#define CONFIG_SERIAL_TAG 1
+#define CONFIG_REVISION_TAG 1
+#undef CONFIG_USE_IRQ /* don't need IRQ/FIQ stuff */
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SKIP_RELOCATE_UBOOT
+#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
+
+#define CONFIG_ARCH_CPU_INIT
+
+/*
+ * Hardware drivers
+ */
+
+/* Console output */
+#define CONFIG_ATMEL_USART 1
+#undef CONFIG_USART0
+#undef CONFIG_USART1
+#undef CONFIG_USART2
+#define CONFIG_USART3 1 /* USART 3 is DBGU */
+
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_ZERO_BOOTDELAY_CHECK 1
+
+/* LCD */
+#define CONFIG_LCD 1
+#define LCD_BPP LCD_COLOR8
+
+#undef CONFIG_SPLASH_SCREEN
+
+#ifndef CONFIG_SPLASH_SCREEN
+#define CONFIG_LCD_LOGO 1
+#define CONFIG_LCD_INFO 1
+#undef CONFIG_LCD_INFO_BELOW_LOGO
+#endif /* CONFIG_SPLASH_SCREEN */
+
+#undef LCD_TEST_PATTERN
+#define CONFIG_SYS_WHITE_ON_BLACK 1
+#define CONFIG_ATMEL_LCD 1
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
+#define CONFIG_OTC570_LCD_BASE 0x23E00000 /* LCD is in SDRAM */
+#define CONFIG_CMD_BMP 1
+
+/* RTC and I2C stuff */
+#define CONFIG_RTC_DS1338 1
+#define CONFIG_SYS_I2C_RTC_ADDR 0x68
+#undef CONFIG_HARD_I2C
+#define CONFIG_SOFT_I2C 1
+#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_SYS_I2C_SLAVE 0x7F
+
+#ifdef CONFIG_SOFT_I2C
+#define CONFIG_I2C_CMD_TREE 1
+#define CONFIG_I2C_MULTI_BUS 1
+/* Enable peripheral clock and configure data and clock pins for pio */
+#define I2C_INIT { \
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_PIOB | \
+ 1 << AT91SAM9263_ID_PIOCDE); \
+ at91_set_gpio_output(AT91_PIN_PB4, 0); \
+ at91_set_gpio_output(AT91_PIN_PB5, 0); \
+}
+/* Configure data pin as output */
+#define I2C_ACTIVE at91_set_gpio_output(AT91_PIN_PB4, 0)
+/* Configure data pin as input */
+#define I2C_TRISTATE at91_set_gpio_input(AT91_PIN_PB4, 0)
+/* Read data pin */
+#define I2C_READ at91_get_gpio_value(AT91_PIN_PB4)
+/* Set data pin */
+#define I2C_SDA(bit) at91_set_gpio_value(AT91_PIN_PB4, bit)
+/* Set clock pin */
+#define I2C_SCL(bit) at91_set_gpio_value(AT91_PIN_PB5, bit)
+#define I2C_DELAY udelay(2) /* 1/4 I2C clock duration */
+#endif /* CONFIG_SOFT_I2C */
+
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_ZERO_BOOTDELAY_CHECK 1
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE 1
+#define CONFIG_BOOTP_BOOTPATH 1
+#define CONFIG_BOOTP_GATEWAY 1
+#define CONFIG_BOOTP_HOSTNAME 1
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_CMD_PING 1
+#define CONFIG_CMD_DHCP 1
+#define CONFIG_CMD_NAND 1
+#define CONFIG_CMD_USB 1
+#define CONFIG_CMD_I2C 1
+#define CONFIG_CMD_DATE 1
+
+/* LED */
+#define CONFIG_AT91_LED 1
+
+/* SDRAM */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM 0x20000000
+
+/* DataFlash */
+#define CONFIG_ATMEL_DATAFLASH_SPI
+#define CONFIG_HAS_DATAFLASH 1
+#define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ)
+#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1
+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
+#define AT91_SPI_CLK 15000000
+#define DATAFLASH_TCSS (0x1a << 16)
+#define DATAFLASH_TCHS (0x1 << 24)
+
+/* NOR flash is not populated, disable it */
+#define CONFIG_SYS_NO_FLASH 1
+
+/* NAND flash */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_ATMEL
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE 0x40000000
+#define CONFIG_SYS_NAND_DBW_8 1
+/* our ALE is AD21 */
+#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
+/* our CLE is AD22 */
+#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
+#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15
+#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PA22
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+#endif
+
+/* Ethernet */
+#define CONFIG_MACB 1
+#define CONFIG_RMII 1
+#define CONFIG_NET_MULTI 1
+#define CONFIG_NET_RETRY_COUNT 20
+#undef CONFIG_RESET_PHY_R
+
+/* USB */
+#define CONFIG_USB_ATMEL
+#define CONFIG_USB_OHCI_NEW 1
+#define CONFIG_DOS_PARTITION 1
+#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
+#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
+#define CONFIG_USB_STORAGE 1
+#define CONFIG_CMD_FAT 1
+
+#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
+
+#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_END 0x23e00000
+
+#define CONFIG_SYS_USE_DATAFLASH 1
+#undef CONFIG_SYS_USE_NANDFLASH
+
+/* CAN */
+#define CONFIG_AT91_CAN 1
+
+/* hw-controller addresses */
+#define CONFIG_ET1100_BASE 0x70000000
+
+/* bootstrap + u-boot + env in dataflash on CS0 */
+#define CONFIG_ENV_IS_IN_DATAFLASH 1
+#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \
+ 0x8400)
+#define CONFIG_ENV_OFFSET 0x4200
+#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \
+ CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SIZE 0x4200
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
+
+#define CONFIG_SYS_PROMPT "=> "
+#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP 1
+#define CONFIG_CMDLINE_EDITING 1
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + \
+ 128*1024, 0x1000)
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */
+
+#define CONFIG_STACKSIZE (32 * 1024) /* regular stack */
+
+#ifdef CONFIG_USE_IRQ
+#error CONFIG_USE_IRQ not supported
+#endif
+
+#endif
ifeq ($(VENDOR),atmel)
LOGO_BMP= logos/atmel.bmp
endif
+ifeq ($(VENDOR),esd)
+LOGO_BMP= logos/esd.bmp
+endif
ifeq ($(VENDOR),ronetix)
LOGO_BMP= logos/ronetix.bmp
endif
projects / project / bcm63xx / u-boot.git / commitdiff
