--- /dev/null
+From ccf0b5e37115f8675455632f583d06ea94f43539 Mon Sep 17 00:00:00 2001
+From: Jon Mason <jonmason@broadcom.com>
+Date: Mon, 2 Nov 2015 13:34:53 -0500
+Subject: [PATCH] ARM: dts: bcm5301x: Add BCM SVK DT files
+
+Add device tree files for Broadcom Northstar based SVKs. Since the
+bcm5301x.dtsi already exists, all that is necessary is the dts files to
+enable the UARTs. With these files, the SVKs are able to boot to shell.
+
+Signed-off-by: Jon Mason <jonmason@broadcom.com>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/Makefile | 5 +++-
+ arch/arm/boot/dts/bcm94708.dts | 56 +++++++++++++++++++++++++++++++++++
+ arch/arm/boot/dts/bcm94709.dts | 56 +++++++++++++++++++++++++++++++++++
+ arch/arm/boot/dts/bcm953012k.dts | 63 ++++++++++++++++++++++++++++++++++++++++
+ 4 files changed, 179 insertions(+), 1 deletion(-)
+ create mode 100644 arch/arm/boot/dts/bcm94708.dts
+ create mode 100644 arch/arm/boot/dts/bcm94709.dts
+ create mode 100644 arch/arm/boot/dts/bcm953012k.dts
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -75,7 +75,10 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+ bcm4709-asus-rt-ac87u.dtb \
+ bcm4709-buffalo-wxr-1900dhp.dtb \
+ bcm4709-netgear-r7000.dtb \
+- bcm4709-netgear-r8000.dtb
++ bcm4709-netgear-r8000.dtb \
++ bcm94708.dtb \
++ bcm94709.dtb \
++ bcm953012k.dtb
+ dtb-$(CONFIG_ARCH_BCM_63XX) += \
+ bcm963138dvt.dtb
+ dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm94708.dts
+@@ -0,0 +1,56 @@
++/*
++ * BSD LICENSE
++ *
++ * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ *
++ * * Redistributions of source code must retain the above copyright
++ * notice, this list of conditions and the following disclaimer.
++ * * Redistributions in binary form must reproduce the above copyright
++ * notice, this list of conditions and the following disclaimer in
++ * the documentation and/or other materials provided with the
++ * distribution.
++ * * Neither the name of Broadcom Corporation nor the names of its
++ * contributors may be used to endorse or promote products derived
++ * from this software without specific prior written permission.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
++ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
++ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
++ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
++ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
++ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
++ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
++ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++/dts-v1/;
++
++#include "bcm4708.dtsi"
++
++/ {
++ model = "NorthStar SVK (BCM94708)";
++ compatible = "brcm,bcm94708", "brcm,bcm4708";
++
++ aliases {
++ serial0 = &uart0;
++ };
++
++ chosen {
++ stdout-path = "serial0:115200n8";
++ };
++
++ memory {
++ reg = <0x00000000 0x08000000>;
++ };
++};
++
++&uart0 {
++ status = "okay";
++};
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm94709.dts
+@@ -0,0 +1,56 @@
++/*
++ * BSD LICENSE
++ *
++ * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ *
++ * * Redistributions of source code must retain the above copyright
++ * notice, this list of conditions and the following disclaimer.
++ * * Redistributions in binary form must reproduce the above copyright
++ * notice, this list of conditions and the following disclaimer in
++ * the documentation and/or other materials provided with the
++ * distribution.
++ * * Neither the name of Broadcom Corporation nor the names of its
++ * contributors may be used to endorse or promote products derived
++ * from this software without specific prior written permission.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
++ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
++ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
++ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
++ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
++ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
++ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
++ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++/dts-v1/;
++
++#include "bcm4708.dtsi"
++
++/ {
++ model = "NorthStar SVK (BCM94709)";
++ compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708";
++
++ aliases {
++ serial0 = &uart0;
++ };
++
++ chosen {
++ stdout-path = "serial0:115200n8";
++ };
++
++ memory {
++ reg = <0x00000000 0x08000000>;
++ };
++};
++
++&uart0 {
++ status = "okay";
++};
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm953012k.dts
+@@ -0,0 +1,63 @@
++/*
++ * BSD LICENSE
++ *
++ * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ *
++ * * Redistributions of source code must retain the above copyright
++ * notice, this list of conditions and the following disclaimer.
++ * * Redistributions in binary form must reproduce the above copyright
++ * notice, this list of conditions and the following disclaimer in
++ * the documentation and/or other materials provided with the
++ * distribution.
++ * * Neither the name of Broadcom Corporation nor the names of its
++ * contributors may be used to endorse or promote products derived
++ * from this software without specific prior written permission.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
++ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
++ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
++ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
++ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
++ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
++ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
++ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++/dts-v1/;
++
++#include "bcm4708.dtsi"
++
++/ {
++ model = "NorthStar SVK (BCM953012K)";
++ compatible = "brcm,bcm953012k", "brcm,brcm53012", "brcm,bcm4708";
++
++ aliases {
++ serial0 = &uart0;
++ serial1 = &uart1;
++ };
++
++ chosen {
++ stdout-path = "serial0:115200n8";
++ };
++
++ memory {
++ reg = <0x00000000 0x10000000>;
++ };
++};
++
++&uart0 {
++ clock-frequency = <62499840>;
++ status = "okay";
++};
++
++&uart1 {
++ clock-frequency = <62499840>;
++ status = "okay";
++};
--- /dev/null
+From cdc36b22f0e4b8badf3db14395f0aa44dcbce4b3 Mon Sep 17 00:00:00 2001
+From: Jon Mason <jonmason@broadcom.com>
+Date: Fri, 20 Nov 2015 10:17:18 -0500
+Subject: [PATCH] ARM: dts: enable clock support for BCM5301X
+
+Replace current device tree dummy clocks with real clock support for
+Broadcom Northstar SoCs.
+
+Signed-off-by: Jon Mason <jonmason@broadcom.com>
+Reviewed-by: Ray Jui <rjui@broadcom.com>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/bcm5301x.dtsi | 92 +++++++++++++++++++++++++++++++----------
+ 1 file changed, 71 insertions(+), 21 deletions(-)
+
+--- a/arch/arm/boot/dts/bcm5301x.dtsi
++++ b/arch/arm/boot/dts/bcm5301x.dtsi
+@@ -8,6 +8,7 @@
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
++#include <dt-bindings/clock/bcm-nsp.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/input/input.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+@@ -27,7 +28,7 @@
+ compatible = "ns16550";
+ reg = <0x0300 0x100>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+- clock-frequency = <100000000>;
++ clocks = <&iprocslow>;
+ status = "disabled";
+ };
+
+@@ -35,48 +36,55 @@
+ compatible = "ns16550";
+ reg = <0x0400 0x100>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+- clock-frequency = <100000000>;
++ clocks = <&iprocslow>;
+ status = "disabled";
+ };
+ };
+
+ mpcore {
+ compatible = "simple-bus";
+- ranges = <0x00000000 0x19020000 0x00003000>;
++ ranges = <0x00000000 0x19000000 0x00023000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+- scu@0000 {
++ a9pll: arm_clk@00000 {
++ #clock-cells = <0>;
++ compatible = "brcm,nsp-armpll";
++ clocks = <&osc>;
++ reg = <0x00000 0x1000>;
++ };
++
++ scu@20000 {
+ compatible = "arm,cortex-a9-scu";
+- reg = <0x0000 0x100>;
++ reg = <0x20000 0x100>;
+ };
+
+- timer@0200 {
++ timer@20200 {
+ compatible = "arm,cortex-a9-global-timer";
+- reg = <0x0200 0x100>;
++ reg = <0x20200 0x100>;
+ interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+- clocks = <&clk_periph>;
++ clocks = <&periph_clk>;
+ };
+
+- local-timer@0600 {
++ local-timer@20600 {
+ compatible = "arm,cortex-a9-twd-timer";
+- reg = <0x0600 0x100>;
++ reg = <0x20600 0x100>;
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
+- clocks = <&clk_periph>;
++ clocks = <&periph_clk>;
+ };
+
+- gic: interrupt-controller@1000 {
++ gic: interrupt-controller@21000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+- reg = <0x1000 0x1000>,
+- <0x0100 0x100>;
++ reg = <0x21000 0x1000>,
++ <0x20100 0x100>;
+ };
+
+- L2: cache-controller@2000 {
++ L2: cache-controller@22000 {
+ compatible = "arm,pl310-cache";
+- reg = <0x2000 0x1000>;
++ reg = <0x22000 0x1000>;
+ cache-unified;
+ arm,shared-override;
+ prefetch-data = <1>;
+@@ -94,14 +102,37 @@
+
+ clocks {
+ #address-cells = <1>;
+- #size-cells = <0>;
++ #size-cells = <1>;
++ ranges;
+
+- /* As long as we do not have a real clock driver us this
+- * fixed clock */
+- clk_periph: periph {
++ osc: oscillator {
++ #clock-cells = <0>;
+ compatible = "fixed-clock";
++ clock-frequency = <25000000>;
++ };
++
++ iprocmed: iprocmed {
++ #clock-cells = <0>;
++ compatible = "fixed-factor-clock";
++ clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
++ clock-div = <2>;
++ clock-mult = <1>;
++ };
++
++ iprocslow: iprocslow {
++ #clock-cells = <0>;
++ compatible = "fixed-factor-clock";
++ clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
++ clock-div = <4>;
++ clock-mult = <1>;
++ };
++
++ periph_clk: periph_clk {
+ #clock-cells = <0>;
+- clock-frequency = <400000000>;
++ compatible = "fixed-factor-clock";
++ clocks = <&a9pll>;
++ clock-div = <2>;
++ clock-mult = <1>;
+ };
+ };
+
+@@ -178,6 +209,25 @@
+ };
+ };
+
++ lcpll0: lcpll0@1800c100 {
++ #clock-cells = <1>;
++ compatible = "brcm,nsp-lcpll0";
++ reg = <0x1800c100 0x14>;
++ clocks = <&osc>;
++ clock-output-names = "lcpll0", "pcie_phy", "sdio",
++ "ddr_phy";
++ };
++
++ genpll: genpll@1800c140 {
++ #clock-cells = <1>;
++ compatible = "brcm,nsp-genpll";
++ reg = <0x1800c140 0x24>;
++ clocks = <&osc>;
++ clock-output-names = "genpll", "phy", "ethernetclk",
++ "usbclk", "iprocfast", "sata1",
++ "sata2";
++ };
++
+ nand: nand@18028000 {
+ compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
+ reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
+++ /dev/null
-From e96ef422d0095fe9ae39b03c0805a0db8ff7e382 Mon Sep 17 00:00:00 2001
-From: Jon Mason <jonmason@broadcom.com>
-Date: Tue, 13 Oct 2015 17:22:25 -0400
-Subject: [PATCH 50/50] ARM: dts: enable clock support for BCM5301X
-
-Replace current device tree dummy clocks with real clock support for
-Broadcom Northstar SoCs.
-
-Signed-off-by: Jon Mason <jonmason@broadcom.com>
----
- arch/arm/boot/dts/bcm5301x.dtsi | 88 ++++++++++++++++++++++++++++++++---------
- 1 file changed, 69 insertions(+), 19 deletions(-)
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -8,6 +8,7 @@
- * Licensed under the GNU/GPL. See COPYING for details.
- */
-
-+#include <dt-bindings/clock/bcm-nsp.h>
- #include <dt-bindings/gpio/gpio.h>
- #include <dt-bindings/input/input.h>
- #include <dt-bindings/interrupt-controller/irq.h>
-@@ -42,41 +43,48 @@
-
- mpcore {
- compatible = "simple-bus";
-- ranges = <0x00000000 0x19020000 0x00003000>;
-+ ranges = <0x00000000 0x19000000 0x00023000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
-- scu@0000 {
-+ a9pll: arm_clk@00000 {
-+ #clock-cells = <0>;
-+ compatible = "brcm,nsp-armpll";
-+ clocks = <&osc>;
-+ reg = <0x00000 0x1000>;
-+ };
-+
-+ scu@20000 {
- compatible = "arm,cortex-a9-scu";
-- reg = <0x0000 0x100>;
-+ reg = <0x20000 0x100>;
- };
-
-- timer@0200 {
-+ timer@20200 {
- compatible = "arm,cortex-a9-global-timer";
-- reg = <0x0200 0x100>;
-+ reg = <0x20200 0x100>;
- interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
-- clocks = <&clk_periph>;
-+ clocks = <&periph_clk>;
- };
-
-- local-timer@0600 {
-+ local-timer@20600 {
- compatible = "arm,cortex-a9-twd-timer";
-- reg = <0x0600 0x100>;
-+ reg = <0x20600 0x100>;
- interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
-- clocks = <&clk_periph>;
-+ clocks = <&periph_clk>;
- };
-
-- gic: interrupt-controller@1000 {
-+ gic: interrupt-controller@21000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- #address-cells = <0>;
- interrupt-controller;
-- reg = <0x1000 0x1000>,
-- <0x0100 0x100>;
-+ reg = <0x21000 0x1000>,
-+ <0x20100 0x100>;
- };
-
-- L2: cache-controller@2000 {
-+ L2: cache-controller@22000 {
- compatible = "arm,pl310-cache";
-- reg = <0x2000 0x1000>;
-+ reg = <0x22000 0x1000>;
- cache-unified;
- arm,shared-override;
- prefetch-data = <1>;
-@@ -94,14 +102,37 @@
-
- clocks {
- #address-cells = <1>;
-- #size-cells = <0>;
-+ #size-cells = <1>;
-+ ranges;
-
-- /* As long as we do not have a real clock driver us this
-- * fixed clock */
-- clk_periph: periph {
-+ osc: oscillator {
-+ #clock-cells = <0>;
- compatible = "fixed-clock";
-+ clock-frequency = <25000000>;
-+ };
-+
-+ iprocmed: iprocmed {
- #clock-cells = <0>;
-- clock-frequency = <400000000>;
-+ compatible = "fixed-factor-clock";
-+ clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
-+ clock-div = <2>;
-+ clock-mult = <1>;
-+ };
-+
-+ iprocslow: iprocslow {
-+ #clock-cells = <0>;
-+ compatible = "fixed-factor-clock";
-+ clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
-+ clock-div = <4>;
-+ clock-mult = <1>;
-+ };
-+
-+ periph_clk: periph_clk {
-+ #clock-cells = <0>;
-+ compatible = "fixed-factor-clock";
-+ clocks = <&a9pll>;
-+ clock-div = <2>;
-+ clock-mult = <1>;
- };
- };
-
-@@ -189,4 +220,23 @@
-
- brcm,nand-has-wp;
- };
-+
-+ lcpll0: lcpll0@1800c100 {
-+ #clock-cells = <1>;
-+ compatible = "brcm,nsp-lcpll0";
-+ reg = <0x1800c100 0x14>;
-+ clocks = <&osc>;
-+ clock-output-names = "lcpll0", "pcie_phy", "sdio",
-+ "ddr_phy";
-+ };
-+
-+ genpll: genpll@1800c140 {
-+ #clock-cells = <1>;
-+ compatible = "brcm,nsp-genpll";
-+ reg = <0x1800c140 0x24>;
-+ clocks = <&osc>;
-+ clock-output-names = "genpll", "phy", "ethernetclk",
-+ "usbclk", "iprocfast", "sata1",
-+ "sata2";
-+ };
- };
+++ /dev/null
-From a0aef7fbab0d8b5a0d445c74990e5233beda246e Mon Sep 17 00:00:00 2001
-From: Jon Mason <jonmason@broadcom.com>
-Date: Wed, 21 Oct 2015 18:46:04 -0400
-Subject: [PATCH] ARM: dts: bcm5301x: Add BCM SVK DT files
-
-Add device tree files for Broadcom Northstar based SVKs. Since the
-bcm5301x.dtsi already exists, all that is necessary is the dts files to
-enable the UARTs. With these files, the SVKs are able to boot to shell.
-
-Signed-off-by: Jon Mason <jonmason@broadcom.com>
----
- arch/arm/boot/dts/Makefile | 5 +++-
- arch/arm/boot/dts/bcm94708.dts | 56 +++++++++++++++++++++++++++++++++++
- arch/arm/boot/dts/bcm94709.dts | 56 +++++++++++++++++++++++++++++++++++
- arch/arm/boot/dts/bcm953012k.dts | 63 ++++++++++++++++++++++++++++++++++++++++
- 4 files changed, 179 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm/boot/dts/bcm94708.dts
- create mode 100644 arch/arm/boot/dts/bcm94709.dts
- create mode 100644 arch/arm/boot/dts/bcm953012k.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -75,7 +75,10 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm4709-asus-rt-ac87u.dtb \
- bcm4709-buffalo-wxr-1900dhp.dtb \
- bcm4709-netgear-r7000.dtb \
-- bcm4709-netgear-r8000.dtb
-+ bcm4709-netgear-r8000.dtb \
-+ bcm94708.dtb \
-+ bcm94709.dtb \
-+ bcm953012k.dtb
- dtb-$(CONFIG_ARCH_BCM_63XX) += \
- bcm963138dvt.dtb
- dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm94708.dts
-@@ -0,0 +1,56 @@
-+/*
-+ * BSD LICENSE
-+ *
-+ * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions
-+ * are met:
-+ *
-+ * * Redistributions of source code must retain the above copyright
-+ * notice, this list of conditions and the following disclaimer.
-+ * * Redistributions in binary form must reproduce the above copyright
-+ * notice, this list of conditions and the following disclaimer in
-+ * the documentation and/or other materials provided with the
-+ * distribution.
-+ * * Neither the name of Broadcom Corporation nor the names of its
-+ * contributors may be used to endorse or promote products derived
-+ * from this software without specific prior written permission.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4708.dtsi"
-+
-+/ {
-+ model = "NorthStar SVK (BCM94708)";
-+ compatible = "brcm,bcm94708", "brcm,bcm4708";
-+
-+ aliases {
-+ serial0 = &uart0;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000>;
-+ };
-+};
-+
-+&uart0 {
-+ status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm94709.dts
-@@ -0,0 +1,56 @@
-+/*
-+ * BSD LICENSE
-+ *
-+ * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions
-+ * are met:
-+ *
-+ * * Redistributions of source code must retain the above copyright
-+ * notice, this list of conditions and the following disclaimer.
-+ * * Redistributions in binary form must reproduce the above copyright
-+ * notice, this list of conditions and the following disclaimer in
-+ * the documentation and/or other materials provided with the
-+ * distribution.
-+ * * Neither the name of Broadcom Corporation nor the names of its
-+ * contributors may be used to endorse or promote products derived
-+ * from this software without specific prior written permission.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4708.dtsi"
-+
-+/ {
-+ model = "NorthStar SVK (BCM94709)";
-+ compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708";
-+
-+ aliases {
-+ serial0 = &uart0;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000>;
-+ };
-+};
-+
-+&uart0 {
-+ status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm953012k.dts
-@@ -0,0 +1,63 @@
-+/*
-+ * BSD LICENSE
-+ *
-+ * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions
-+ * are met:
-+ *
-+ * * Redistributions of source code must retain the above copyright
-+ * notice, this list of conditions and the following disclaimer.
-+ * * Redistributions in binary form must reproduce the above copyright
-+ * notice, this list of conditions and the following disclaimer in
-+ * the documentation and/or other materials provided with the
-+ * distribution.
-+ * * Neither the name of Broadcom Corporation nor the names of its
-+ * contributors may be used to endorse or promote products derived
-+ * from this software without specific prior written permission.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4708.dtsi"
-+
-+/ {
-+ model = "NorthStar SVK (BCM953012K)";
-+ compatible = "brcm,bcm953012k", "brcm,brcm53012", "brcm,bcm4708";
-+
-+ aliases {
-+ serial0 = &uart0;
-+ serial1 = &uart1;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x10000000>;
-+ };
-+};
-+
-+&uart0 {
-+ clock-frequency = <62499840>;
-+ status = "okay";
-+};
-+
-+&uart1 {
-+ clock-frequency = <62499840>;
-+ status = "okay";
-+};
projects / openwrt / staging / jogo.git / commitdiff