#include <linux/mtd/partitions.h>
#include <linux/io.h>
#include <linux/slab.h>
-#include <linux/mtd/fsmc.h>
#include <linux/amba/bus.h>
#include <mtd/mtd-abi.h>
+#define FSMC_NAND_BW8 1
+#define FSMC_NAND_BW16 2
+
+#define FSMC_MAX_NOR_BANKS 4
+#define FSMC_MAX_NAND_BANKS 4
+
+#define FSMC_FLASH_WIDTH8 1
+#define FSMC_FLASH_WIDTH16 2
+
+/* fsmc controller registers for NOR flash */
+#define CTRL 0x0
+ /* ctrl register definitions */
+ #define BANK_ENABLE (1 << 0)
+ #define MUXED (1 << 1)
+ #define NOR_DEV (2 << 2)
+ #define WIDTH_8 (0 << 4)
+ #define WIDTH_16 (1 << 4)
+ #define RSTPWRDWN (1 << 6)
+ #define WPROT (1 << 7)
+ #define WRT_ENABLE (1 << 12)
+ #define WAIT_ENB (1 << 13)
+
+#define CTRL_TIM 0x4
+ /* ctrl_tim register definitions */
+
+#define FSMC_NOR_BANK_SZ 0x8
+#define FSMC_NOR_REG_SIZE 0x40
+
+#define FSMC_NOR_REG(base, bank, reg) (base + \
+ FSMC_NOR_BANK_SZ * (bank) + \
+ reg)
+
+/* fsmc controller registers for NAND flash */
+#define PC 0x00
+ /* pc register definitions */
+ #define FSMC_RESET (1 << 0)
+ #define FSMC_WAITON (1 << 1)
+ #define FSMC_ENABLE (1 << 2)
+ #define FSMC_DEVTYPE_NAND (1 << 3)
+ #define FSMC_DEVWID_8 (0 << 4)
+ #define FSMC_DEVWID_16 (1 << 4)
+ #define FSMC_ECCEN (1 << 6)
+ #define FSMC_ECCPLEN_512 (0 << 7)
+ #define FSMC_ECCPLEN_256 (1 << 7)
+ #define FSMC_TCLR_1 (1)
+ #define FSMC_TCLR_SHIFT (9)
+ #define FSMC_TCLR_MASK (0xF)
+ #define FSMC_TAR_1 (1)
+ #define FSMC_TAR_SHIFT (13)
+ #define FSMC_TAR_MASK (0xF)
+#define STS 0x04
+ /* sts register definitions */
+ #define FSMC_CODE_RDY (1 << 15)
+#define COMM 0x08
+ /* comm register definitions */
+ #define FSMC_TSET_0 0
+ #define FSMC_TSET_SHIFT 0
+ #define FSMC_TSET_MASK 0xFF
+ #define FSMC_TWAIT_6 6
+ #define FSMC_TWAIT_SHIFT 8
+ #define FSMC_TWAIT_MASK 0xFF
+ #define FSMC_THOLD_4 4
+ #define FSMC_THOLD_SHIFT 16
+ #define FSMC_THOLD_MASK 0xFF
+ #define FSMC_THIZ_1 1
+ #define FSMC_THIZ_SHIFT 24
+ #define FSMC_THIZ_MASK 0xFF
+#define ATTRIB 0x0C
+#define IOATA 0x10
+#define ECC1 0x14
+#define ECC2 0x18
+#define ECC3 0x1C
+#define FSMC_NAND_BANK_SZ 0x20
+
+#define FSMC_NAND_REG(base, bank, reg) (base + FSMC_NOR_REG_SIZE + \
+ (FSMC_NAND_BANK_SZ * (bank)) + \
+ reg)
+
+#define FSMC_BUSY_WAIT_TIMEOUT (1 * HZ)
+
+struct fsmc_nand_timings {
+ uint8_t tclr;
+ uint8_t tar;
+ uint8_t thiz;
+ uint8_t thold;
+ uint8_t twait;
+ uint8_t tset;
+};
+
+enum access_mode {
+ USE_DMA_ACCESS = 1,
+ USE_WORD_ACCESS,
+};
+
+/**
+ * fsmc_nand_platform_data - platform specific NAND controller config
+ * @nand_timings: timing setup for the physical NAND interface
+ * @partitions: partition table for the platform, use a default fallback
+ * if this is NULL
+ * @nr_partitions: the number of partitions in the previous entry
+ * @options: different options for the driver
+ * @width: bus width
+ * @bank: default bank
+ * @select_bank: callback to select a certain bank, this is
+ * platform-specific. If the controller only supports one bank
+ * this may be set to NULL
+ */
+struct fsmc_nand_platform_data {
+ struct fsmc_nand_timings *nand_timings;
+ struct mtd_partition *partitions;
+ unsigned int nr_partitions;
+ unsigned int options;
+ unsigned int width;
+ unsigned int bank;
+
+ enum access_mode mode;
+
+ void (*select_bank)(uint32_t bank, uint32_t busw);
+
+ /* priv structures for dma accesses */
+ void *read_dma_priv;
+ void *write_dma_priv;
+};
+
static int fsmc_ecc1_ooblayout_ecc(struct mtd_info *mtd, int section,
struct mtd_oob_region *oobregion)
{
return true;
}
-#ifdef CONFIG_OF
static int fsmc_nand_probe_config_dt(struct platform_device *pdev,
struct device_node *np)
{
}
return 0;
}
-#else
-static int fsmc_nand_probe_config_dt(struct platform_device *pdev,
- struct device_node *np)
-{
- return -ENOSYS;
-}
-#endif
/*
* fsmc_nand_probe - Probe function
u32 pid;
int i;
- if (np) {
- pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
- pdev->dev.platform_data = pdata;
- ret = fsmc_nand_probe_config_dt(pdev, np);
- if (ret) {
- dev_err(&pdev->dev, "no platform data\n");
- return -ENODEV;
- }
- }
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
- if (!pdata) {
- dev_err(&pdev->dev, "platform data is NULL\n");
- return -EINVAL;
+ pdev->dev.platform_data = pdata;
+ ret = fsmc_nand_probe_config_dt(pdev, np);
+ if (ret) {
+ dev_err(&pdev->dev, "no platform data\n");
+ return -ENODEV;
}
/* Allocate memory for the device structure (and zero it) */
+++ /dev/null
-/*
- * incude/mtd/fsmc.h
- *
- * ST Microelectronics
- * Flexible Static Memory Controller (FSMC)
- * platform data interface and header file
- *
- * Copyright © 2010 ST Microelectronics
- * Vipin Kumar <vipin.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MTD_FSMC_H
-#define __MTD_FSMC_H
-
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/types.h>
-#include <linux/mtd/partitions.h>
-#include <asm/param.h>
-
-#define FSMC_NAND_BW8 1
-#define FSMC_NAND_BW16 2
-
-#define FSMC_MAX_NOR_BANKS 4
-#define FSMC_MAX_NAND_BANKS 4
-
-#define FSMC_FLASH_WIDTH8 1
-#define FSMC_FLASH_WIDTH16 2
-
-/* fsmc controller registers for NOR flash */
-#define CTRL 0x0
- /* ctrl register definitions */
- #define BANK_ENABLE (1 << 0)
- #define MUXED (1 << 1)
- #define NOR_DEV (2 << 2)
- #define WIDTH_8 (0 << 4)
- #define WIDTH_16 (1 << 4)
- #define RSTPWRDWN (1 << 6)
- #define WPROT (1 << 7)
- #define WRT_ENABLE (1 << 12)
- #define WAIT_ENB (1 << 13)
-
-#define CTRL_TIM 0x4
- /* ctrl_tim register definitions */
-
-#define FSMC_NOR_BANK_SZ 0x8
-#define FSMC_NOR_REG_SIZE 0x40
-
-#define FSMC_NOR_REG(base, bank, reg) (base + \
- FSMC_NOR_BANK_SZ * (bank) + \
- reg)
-
-/* fsmc controller registers for NAND flash */
-#define PC 0x00
- /* pc register definitions */
- #define FSMC_RESET (1 << 0)
- #define FSMC_WAITON (1 << 1)
- #define FSMC_ENABLE (1 << 2)
- #define FSMC_DEVTYPE_NAND (1 << 3)
- #define FSMC_DEVWID_8 (0 << 4)
- #define FSMC_DEVWID_16 (1 << 4)
- #define FSMC_ECCEN (1 << 6)
- #define FSMC_ECCPLEN_512 (0 << 7)
- #define FSMC_ECCPLEN_256 (1 << 7)
- #define FSMC_TCLR_1 (1)
- #define FSMC_TCLR_SHIFT (9)
- #define FSMC_TCLR_MASK (0xF)
- #define FSMC_TAR_1 (1)
- #define FSMC_TAR_SHIFT (13)
- #define FSMC_TAR_MASK (0xF)
-#define STS 0x04
- /* sts register definitions */
- #define FSMC_CODE_RDY (1 << 15)
-#define COMM 0x08
- /* comm register definitions */
- #define FSMC_TSET_0 0
- #define FSMC_TSET_SHIFT 0
- #define FSMC_TSET_MASK 0xFF
- #define FSMC_TWAIT_6 6
- #define FSMC_TWAIT_SHIFT 8
- #define FSMC_TWAIT_MASK 0xFF
- #define FSMC_THOLD_4 4
- #define FSMC_THOLD_SHIFT 16
- #define FSMC_THOLD_MASK 0xFF
- #define FSMC_THIZ_1 1
- #define FSMC_THIZ_SHIFT 24
- #define FSMC_THIZ_MASK 0xFF
-#define ATTRIB 0x0C
-#define IOATA 0x10
-#define ECC1 0x14
-#define ECC2 0x18
-#define ECC3 0x1C
-#define FSMC_NAND_BANK_SZ 0x20
-
-#define FSMC_NAND_REG(base, bank, reg) (base + FSMC_NOR_REG_SIZE + \
- (FSMC_NAND_BANK_SZ * (bank)) + \
- reg)
-
-#define FSMC_BUSY_WAIT_TIMEOUT (1 * HZ)
-
-struct fsmc_nand_timings {
- uint8_t tclr;
- uint8_t tar;
- uint8_t thiz;
- uint8_t thold;
- uint8_t twait;
- uint8_t tset;
-};
-
-enum access_mode {
- USE_DMA_ACCESS = 1,
- USE_WORD_ACCESS,
-};
-
-/**
- * fsmc_nand_platform_data - platform specific NAND controller config
- * @nand_timings: timing setup for the physical NAND interface
- * @partitions: partition table for the platform, use a default fallback
- * if this is NULL
- * @nr_partitions: the number of partitions in the previous entry
- * @options: different options for the driver
- * @width: bus width
- * @bank: default bank
- * @select_bank: callback to select a certain bank, this is
- * platform-specific. If the controller only supports one bank
- * this may be set to NULL
- */
-struct fsmc_nand_platform_data {
- struct fsmc_nand_timings *nand_timings;
- struct mtd_partition *partitions;
- unsigned int nr_partitions;
- unsigned int options;
- unsigned int width;
- unsigned int bank;
-
- enum access_mode mode;
-
- void (*select_bank)(uint32_t bank, uint32_t busw);
-
- /* priv structures for dma accesses */
- void *read_dma_priv;
- void *write_dma_priv;
-};
-
-extern int __init fsmc_nor_init(struct platform_device *pdev,
- unsigned long base, uint32_t bank, uint32_t width);
-extern void __init fsmc_init_board_info(struct platform_device *pdev,
- struct mtd_partition *partitions, unsigned int nr_partitions,
- unsigned int width);
-
-#endif /* __MTD_FSMC_H */
projects / openwrt / staging / blogic.git / commitdiff