This adds the build option for the new UniFi AC Mesh.
It is a direct hardware copy from the AC Lite.
- SoC: QCA9563-AL3A (775Mhz)
- RAM: 128MiB
- Flash: 16MiB - dual firmware partitions!
- LAN: 1 1000M - POE
- Wireless:
2.4G: QCA9563
5G: UniFi Chip, QCA988X compatible
Thanks to Frank Dietz for testing.
Signed-off-by: Ludwig Thomeczek <ledesrc@wxorx.net>
[wrapped too long lines in mach-ubnt-unifiac.c]
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
*"UniFi AP Pro")
name="uap-pro"
;;
- *"UniFi-AC-LITE")
+ *"UniFi-AC-LITE/MESH")
name="unifiac-lite"
;;
*"UniFi-AC-PRO")
select ATH79_DEV_USB
config ATH79_MACH_UBNT_UNIFIAC
- bool "Ubiquiti UniFi AC (LITE/LR/PRO) support"
+ bool "Ubiquiti UniFi AC (LITE/LR/MESH/PRO) support"
select SOC_QCA956X
select ATH79_DEV_AP9X_PCI if PCI
select ATH79_DEV_ETH
ubnt_unifiac_gpio_keys);
}
-MIPS_MACHINE(ATH79_MACH_UBNT_UNIFIAC_LITE, "UBNT-UF-AC-LITE", "Ubiquiti UniFi-AC-LITE",
- ubnt_unifiac_lite_setup);
+MIPS_MACHINE(ATH79_MACH_UBNT_UNIFIAC_LITE, "UBNT-UF-AC-LITE",
+ "Ubiquiti UniFi-AC-LITE/MESH", ubnt_unifiac_lite_setup);
static struct ar8327_pad_cfg ubnt_unifiac_pro_ar8327_pad0_cfg = {
.mode = AR8327_PAD_MAC_SGMII,
}
-MIPS_MACHINE(ATH79_MACH_UBNT_UNIFIAC_PRO, "UBNT-UF-AC-PRO", "Ubiquiti UniFi-AC-PRO",
- ubnt_unifiac_pro_setup);
+MIPS_MACHINE(ATH79_MACH_UBNT_UNIFIAC_PRO, "UBNT-UF-AC-PRO",
+ "Ubiquiti UniFi-AC-PRO", ubnt_unifiac_pro_setup);
ATH79_MACH_UBNT_RSPRO, /* Ubiquiti RouterStation Pro */
ATH79_MACH_UBNT_UAP_PRO, /* Ubiquiti UniFi AP Pro */
ATH79_MACH_UBNT_UNIFI, /* Ubiquiti Unifi */
- ATH79_MACH_UBNT_UNIFIAC_LITE, /* Ubiquiti Unifi AC LITE/LR */
+ ATH79_MACH_UBNT_UNIFIAC_LITE, /* Ubiquiti Unifi AC LITE/LR/MESH */
ATH79_MACH_UBNT_UNIFIAC_PRO, /* Ubiquiti Unifi AC PRO */
ATH79_MACH_UBNT_UNIFI_OUTDOOR, /* Ubiquiti UnifiAP Outdoor */
ATH79_MACH_UBNT_UNIFI_OUTDOOR_PLUS, /* Ubiquiti UnifiAP Outdoor+ */
BOARDNAME := UBNT-UF-AC-LITE
endef
+define Device/ubnt-unifiac-mesh
+ $(Device/ubnt-unifiac-lite)
+ DEVICE_TITLE := Ubiquiti UniFi AC-Mesh
+endef
+
define Device/ubnt-unifiac-pro
$(Device/ubnt-unifiac)
DEVICE_TITLE := Ubiquiti UniFi AC-Pro
BOARDNAME := UBNT-U20
DEVICE_PROFILE := UBNT UBNTUNIFIOUTDOOR
endef
-TARGET_DEVICES += ubnt-unifi ubnt-unifiac-lite ubnt-unifiac-pro ubnt-unifi-outdoor
+TARGET_DEVICES += ubnt-unifi ubnt-unifiac-lite ubnt-unifiac-mesh ubnt-unifiac-pro ubnt-unifi-outdoor
define Device/ubnt-nano-m-xw
$(Device/ubnt-xw)