kirkwood: fix DTS partitions for Pogoplug E02
authorAlberto Bursi <bobafetthotmail@gmail.com>
Fri, 27 Mar 2020 11:21:30 +0000 (12:21 +0100)
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>
Fri, 27 Mar 2020 16:12:46 +0000 (17:12 +0100)
The Pogoplug E02 was not using the correct partitions
in device tree, but used the ones from upstream and
thus could not boot OpenWrt images.

In contrast, uboot-kirkwood is using the correct
partitions since d3fc4fbd74dc ("uboot-kirkwood: re-add
Pogoplug E02 support").

This patch corrects the partitions in DTS for kernels
4.14, 4.19 and 5.4.

Fixes: 2b0fa00da8fc ("kirkwood: add Pogoplug E02 Kernel support")
Signed-off-by: Alberto Bursi <bobafetthotmail@gmail.com>
Reviewed-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Sungbo Eo <mans0n@gorani.run>
[commit title/message facelift, refresh 4.14 patch]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
target/linux/kirkwood/patches-4.14/110-pogo_e02.patch
target/linux/kirkwood/patches-4.19/110-pogo_e02.patch
target/linux/kirkwood/patches-5.4/110-pogo_e02.patch

index b2a9c461d8c7d99dfe7d762575d6642efe73b21d..26dbf8a734705fa493caa3601f25d860c4f9ff8e 100644 (file)
                        label = "pogo_e02:orange:fault";
                        gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
                };
+@@ -97,24 +104,24 @@
+       status = "okay";
+       partition@0 {
+-              label = "u-boot";
+-              reg = <0x0000000 0x100000>;
++              label = "uboot";
++              reg = <0x0 0xe0000>;
+               read-only;
+       };
+-      partition@100000 {
+-              label = "uImage";
+-              reg = <0x0100000 0x400000>;
++      partition@e0000 {
++              label = "uboot_env";
++              reg = <0xe0000 0x20000>;
+       };
+-      partition@500000 {
+-              label = "pogoplug";
+-              reg = <0x0500000 0x2000000>;
++      partition@100000 {
++              label = "second_stage_uboot";
++              reg = <0x100000 0x100000>;
+       };
+-      partition@2500000 {
+-              label = "root";
+-              reg = <0x02500000 0x5b00000>;
++      partition@200000 {
++              label = "ubi";
++              reg = <0x200000 0x7e00000>;
+       };
+ };
index 59d2893466e16d1dd5f627d6170c1377a757b6d7..4b64337c9c5fef9514b7ab8de014a13b43ba2f91 100644 (file)
                        label = "pogo_e02:orange:fault";
                        gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
                };
+@@ -95,25 +102,26 @@
+       status = "okay";
+       partition@0 {
+-              label = "u-boot";
+-              reg = <0x0000000 0x100000>;
++              label = "uboot";
++              reg = <0x0 0xe0000>;
+               read-only;
+       };
+-      partition@100000 {
+-              label = "uImage";
+-              reg = <0x0100000 0x400000>;
++      partition@e0000 {
++              label = "uboot_env";
++              reg = <0xe0000 0x20000>;
+       };
+-      partition@500000 {
+-              label = "pogoplug";
+-              reg = <0x0500000 0x2000000>;
++      partition@100000 {
++              label = "second_stage_uboot";
++              reg = <0x100000 0x100000>;
+       };
+-      partition@2500000 {
+-              label = "root";
+-              reg = <0x02500000 0x5b00000>;
++      partition@200000 {
++              label = "ubi";
++              reg = <0x200000 0x7e00000>;
+       };
++
+ };
+ &mdio {
index 59d2893466e16d1dd5f627d6170c1377a757b6d7..fc384d3521f960c6add3bb155457412342891994 100644 (file)
                        label = "pogo_e02:orange:fault";
                        gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
                };
+@@ -95,24 +102,24 @@
+       status = "okay";
+       partition@0 {
+-              label = "u-boot";
+-              reg = <0x0000000 0x100000>;
++              label = "uboot";
++              reg = <0x0 0xe0000>;
+               read-only;
+       };
+-      partition@100000 {
+-              label = "uImage";
+-              reg = <0x0100000 0x400000>;
++      partition@e0000 {
++              label = "uboot_env";
++              reg = <0xe0000 0x20000>;
+       };
+-      partition@500000 {
+-              label = "pogoplug";
+-              reg = <0x0500000 0x2000000>;
++      partition@100000 {
++              label = "second_stage_uboot";
++              reg = <0x100000 0x100000>;
+       };
+-      partition@2500000 {
+-              label = "root";
+-              reg = <0x02500000 0x5b00000>;
++      partition@200000 {
++              label = "ubi";
++              reg = <0x200000 0x7e00000>;
+       };
+ };