The Pogoplug E02 was not using the correct partitions
in device tree, but used the ones from upstream and
thus could not boot OpenWrt images.
In contrast, uboot-kirkwood is using the correct
partitions since
d3fc4fbd74dc ("uboot-kirkwood: re-add
Pogoplug E02 support").
This patch corrects the partitions in DTS for kernels
4.14, 4.19 and 5.4.
Fixes: 2b0fa00da8fc ("kirkwood: add Pogoplug E02 Kernel support")
Signed-off-by: Alberto Bursi <bobafetthotmail@gmail.com>
Reviewed-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Sungbo Eo <mans0n@gorani.run>
[commit title/message facelift, refresh 4.14 patch]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
label = "pogo_e02:orange:fault";
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
};
+@@ -97,24 +104,24 @@
+ status = "okay";
+
+ partition@0 {
+- label = "u-boot";
+- reg = <0x0000000 0x100000>;
++ label = "uboot";
++ reg = <0x0 0xe0000>;
+ read-only;
+ };
+
+- partition@100000 {
+- label = "uImage";
+- reg = <0x0100000 0x400000>;
++ partition@e0000 {
++ label = "uboot_env";
++ reg = <0xe0000 0x20000>;
+ };
+
+- partition@500000 {
+- label = "pogoplug";
+- reg = <0x0500000 0x2000000>;
++ partition@100000 {
++ label = "second_stage_uboot";
++ reg = <0x100000 0x100000>;
+ };
+
+- partition@2500000 {
+- label = "root";
+- reg = <0x02500000 0x5b00000>;
++ partition@200000 {
++ label = "ubi";
++ reg = <0x200000 0x7e00000>;
+ };
+ };
+
label = "pogo_e02:orange:fault";
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
};
+@@ -95,25 +102,26 @@
+ status = "okay";
+
+ partition@0 {
+- label = "u-boot";
+- reg = <0x0000000 0x100000>;
++ label = "uboot";
++ reg = <0x0 0xe0000>;
+ read-only;
+ };
+
+- partition@100000 {
+- label = "uImage";
+- reg = <0x0100000 0x400000>;
++ partition@e0000 {
++ label = "uboot_env";
++ reg = <0xe0000 0x20000>;
+ };
+
+- partition@500000 {
+- label = "pogoplug";
+- reg = <0x0500000 0x2000000>;
++ partition@100000 {
++ label = "second_stage_uboot";
++ reg = <0x100000 0x100000>;
+ };
+
+- partition@2500000 {
+- label = "root";
+- reg = <0x02500000 0x5b00000>;
++ partition@200000 {
++ label = "ubi";
++ reg = <0x200000 0x7e00000>;
+ };
++
+ };
+
+ &mdio {
label = "pogo_e02:orange:fault";
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
};
+@@ -95,24 +102,24 @@
+ status = "okay";
+
+ partition@0 {
+- label = "u-boot";
+- reg = <0x0000000 0x100000>;
++ label = "uboot";
++ reg = <0x0 0xe0000>;
+ read-only;
+ };
+
+- partition@100000 {
+- label = "uImage";
+- reg = <0x0100000 0x400000>;
++ partition@e0000 {
++ label = "uboot_env";
++ reg = <0xe0000 0x20000>;
+ };
+
+- partition@500000 {
+- label = "pogoplug";
+- reg = <0x0500000 0x2000000>;
++ partition@100000 {
++ label = "second_stage_uboot";
++ reg = <0x100000 0x100000>;
+ };
+
+- partition@2500000 {
+- label = "root";
+- reg = <0x02500000 0x5b00000>;
++ partition@200000 {
++ label = "ubi";
++ reg = <0x200000 0x7e00000>;
+ };
+ };
+