mediatek: Xiaomi AX3000t: fix soft brick for the rd23 model

This commit fixes Xiaomi AX3000t soft bricks. Issue affects at least rd23
model (Global version) users:
Link: https://forum.openwrt.org/t/openwrt-support-for-xiaomi-ax3000t/180490/452
I also found that these nvram settings are wrong for the rd23 model and
U-Boot erase them:
'''
flag_try_sys1_failed 8
flag_try_sys2_failed 8
'''
As a result, platform.sh -> xiaomi_initial_setup() function sometimes ends
early without applying settings for the rd23 model.

RD03 model strategy:
1. Don't touch values those were set up by platform.sh ->
xiaomi_initial_setup() function

RD23 model strategy:
1. Apply correct nvram settings at every boot
2. Use bulk fw_setenv call

I didn't find opened issue for AX3000t. Similar AX3200 issue:
Link: https://github.com/openwrt/openwrt/issues/16347
So, other Xiaomi devices (e.g. Xiaomi WR30U) may also require fix.

Fixes: 7dbcc1215a56cc1da68c81bf92d7efa174c5e051 ("mediatek: filogic: add support for Xiaomi AX3000T")
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17580
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

diff --git a/target/linux/mediatek/filogic/base-files/etc/init.d/bootcount b/target/linux/mediatek/filogic/base-files/etc/init.d/bootcount
index c52d004c639cd885838efa55095182d7ebea1cf6..a0e7d40862930fb3119d261e081a6dbe98581c7b 100755 (executable)
--- a/target/linux/mediatek/filogic/base-files/etc/init.d/bootcount
+++ b/target/linux/mediatek/filogic/base-files/etc/init.d/bootcount
@@ -5,6 +5,24 @@ START=99
 
 boot() {
        case $(board_name) in
+       xiaomi,mi-router-ax3000t)
+               . /lib/upgrade/common.sh
+               [ "$(rootfs_type)" = "tmpfs" ] && \
+                       logger "bootcount: initramfs mode detected, exit" && \
+                       return 0
+               [ "$(fw_printenv -n flag_try_sys2_failed 2>&1)" = "8" ] && \
+                       logger "bootcount: rd03 model detected, exit" && \
+                       return 0
+               fw_setenv -s - <<-EOF
+                       flag_boot_rootfs 0
+                       flag_boot_success 1
+                       flag_last_success 0
+                       flag_ota_reboot 0
+                       flag_try_sys1_failed 0
+                       flag_try_sys2_failed 0
+               EOF
+               logger "bootcount: rd23 model detected, nvram was updated"
+               ;;
        zyxel,ex5700-telenor)
                fw_setenv uboot_bootcount 0
                ;;