MIPS: remove board.c

After all MIPS boards are switched to generic-board, the
MIPS specific board.c can be removed.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile
index e483e86f6b471e69e4b38b190c0c14278294a621..7f9b6536afa84ab8e7ff2947bec24518caae95b5 100644 (file)
--- a/arch/mips/lib/Makefile
+++ b/arch/mips/lib/Makefile
@@ -5,9 +5,6 @@
 # SPDX-License-Identifier:     GPL-2.0+
 #
 
-ifndef CONFIG_SYS_GENERIC_BOARD
-obj-y  += board.o
-endif
 obj-y  += io.o
 
 obj-$(CONFIG_CMD_BOOTM) += bootm.o

diff --git a/arch/mips/lib/board.c b/arch/mips/lib/board.c
deleted file mode 100644 (file)
index 3feb020..0000000
--- a/arch/mips/lib/board.c
+++ /dev/null
@@ -1,320 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:    GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <malloc.h>
-#include <serial.h>
-#include <stdio_dev.h>
-#include <version.h>
-#include <net.h>
-#include <environment.h>
-#include <nand.h>
-#include <onenand_uboot.h>
-#include <spi.h>
-
-#ifdef CONFIG_BITBANGMII
-#include <miiphy.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-ulong monitor_flash_len;
-
-static char *failed = "*** failed ***\n";
-
-int __board_early_init_f(void)
-{
-       /*
-        * Nothing to do in this dummy implementation
-        */
-       return 0;
-}
-int board_early_init_f(void)
-       __attribute__((weak, alias("__board_early_init_f")));
-
-static int init_func_ram(void)
-{
-#ifdef CONFIG_BOARD_TYPES
-       int board_type = gd->board_type;
-#else
-       int board_type = 0;     /* use dummy arg */
-#endif
-       puts("DRAM:  ");
-
-       gd->ram_size = initdram(board_type);
-       if (gd->ram_size > 0) {
-               print_size(gd->ram_size, "\n");
-               return 0;
-       }
-       puts(failed);
-       return 1;
-}
-
-static int display_banner(void)
-{
-
-       printf("\n\n%s\n\n", version_string);
-       return 0;
-}
-
-#ifndef CONFIG_SYS_NO_FLASH
-static void display_flash_config(ulong size)
-{
-       puts("Flash: ");
-       print_size(size, "\n");
-}
-#endif
-
-static int init_baudrate(void)
-{
-       gd->baudrate = getenv_ulong("baudrate", 10, CONFIG_BAUDRATE);
-       return 0;
-}
-
-
-/*
- * Breath some life into the board...
- *
- * The first part of initialization is running from Flash memory;
- * its main purpose is to initialize the RAM so that we
- * can relocate the monitor code to RAM.
- */
-
-/*
- * All attempts to come up with a "common" initialization sequence
- * that works for all boards and architectures failed: some of the
- * requirements are just _too_ different. To get rid of the resulting
- * mess of board dependend #ifdef'ed code we now make the whole
- * initialization sequence configurable to the user.
- *
- * The requirements for any new initalization function is simple: it
- * receives a pointer to the "global data" structure as it's only
- * argument, and returns an integer return code, where 0 means
- * "continue" and != 0 means "fatal error, hang the system".
- */
-typedef int (init_fnc_t)(void);
-
-init_fnc_t *init_sequence[] = {
-       board_early_init_f,
-       timer_init,
-       env_init,               /* initialize environment */
-       init_baudrate,          /* initialize baudrate settings */
-       serial_init,            /* serial communications setup */
-       console_init_f,
-       display_banner,         /* say that we are here */
-       checkboard,
-       init_func_ram,
-       NULL,
-};
-
-
-void board_init_f(ulong bootflag)
-{
-       gd_t gd_data, *id;
-       bd_t *bd;
-       init_fnc_t **init_fnc_ptr;
-       ulong addr, addr_sp, len;
-       ulong *s;
-
-       /* Pointer is writable since we allocated a register for it.
-        */
-       gd = &gd_data;
-       /* compiler optimization barrier needed for GCC >= 3.4 */
-       __asm__ __volatile__("" : : : "memory");
-
-       memset((void *)gd, 0, sizeof(gd_t));
-
-       for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
-               if ((*init_fnc_ptr)() != 0)
-                       hang();
-       }
-
-       /*
-        * Now that we have DRAM mapped and working, we can
-        * relocate the code and continue running from DRAM.
-        */
-       addr = CONFIG_SYS_SDRAM_BASE + gd->ram_size;
-
-       /* We can reserve some RAM "on top" here.
-        */
-
-       /* round down to next 4 kB limit.
-        */
-       addr &= ~(4096 - 1);
-       debug("Top of RAM usable for U-Boot at: %08lx\n", addr);
-
-       /* Reserve memory for U-Boot code, data & bss
-        * round down to next 16 kB limit
-        */
-       len = bss_end() - CONFIG_SYS_MONITOR_BASE;
-       addr -= len;
-       addr &= ~(16 * 1024 - 1);
-
-       debug("Reserving %ldk for U-Boot at: %08lx\n", len >> 10, addr);
-
-        /* Reserve memory for malloc() arena.
-        */
-       addr_sp = addr - TOTAL_MALLOC_LEN;
-       debug("Reserving %dk for malloc() at: %08lx\n",
-                       TOTAL_MALLOC_LEN >> 10, addr_sp);
-
-       /*
-        * (permanently) allocate a Board Info struct
-        * and a permanent copy of the "global" data
-        */
-       addr_sp -= sizeof(bd_t);
-       bd = (bd_t *)addr_sp;
-       gd->bd = bd;
-       debug("Reserving %zu Bytes for Board Info at: %08lx\n",
-                       sizeof(bd_t), addr_sp);
-
-       addr_sp -= sizeof(gd_t);
-       id = (gd_t *)addr_sp;
-       debug("Reserving %zu Bytes for Global Data at: %08lx\n",
-                       sizeof(gd_t), addr_sp);
-
-       /* Reserve memory for boot params.
-        */
-       addr_sp -= CONFIG_SYS_BOOTPARAMS_LEN;
-       bd->bi_boot_params = addr_sp;
-       debug("Reserving %dk for boot params() at: %08lx\n",
-                       CONFIG_SYS_BOOTPARAMS_LEN >> 10, addr_sp);
-
-       /*
-        * Finally, we set up a new (bigger) stack.
-        *
-        * Leave some safety gap for SP, force alignment on 16 byte boundary
-        * Clear initial stack frame
-        */
-       addr_sp -= 16;
-       addr_sp &= ~0xF;
-       s = (ulong *)addr_sp;
-       *s-- = 0;
-       *s-- = 0;
-       addr_sp = (ulong)s;
-       debug("Stack Pointer at: %08lx\n", addr_sp);
-
-       /*
-        * Save local variables to board info struct
-        */
-       bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;        /* start of DRAM */
-       bd->bi_memsize  = gd->ram_size;         /* size of DRAM in bytes */
-
-       memcpy(id, (void *)gd, sizeof(gd_t));
-
-       relocate_code(addr_sp, id, addr);
-
-       /* NOTREACHED - relocate_code() does not return */
-}
-
-/*
- * This is the next part if the initialization sequence: we are now
- * running from RAM and have a "normal" C environment, i. e. global
- * data can be written, BSS has been cleared, the stack size in not
- * that critical any more, etc.
- */
-
-void board_init_r(gd_t *id, ulong dest_addr)
-{
-#ifndef CONFIG_SYS_NO_FLASH
-       ulong size;
-#endif
-       bd_t *bd;
-
-       gd = id;
-       gd->flags |= GD_FLG_RELOC;      /* tell others: relocation done */
-
-       debug("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
-
-       gd->reloc_off = dest_addr - CONFIG_SYS_MONITOR_BASE;
-
-       monitor_flash_len = image_copy_end() - dest_addr;
-
-       serial_initialize();
-
-       bd = gd->bd;
-
-       /* The Malloc area is immediately below the monitor copy in DRAM */
-       mem_malloc_init(CONFIG_SYS_MONITOR_BASE + gd->reloc_off -
-                       TOTAL_MALLOC_LEN, TOTAL_MALLOC_LEN);
-
-#ifndef CONFIG_SYS_NO_FLASH
-       /* configure available FLASH banks */
-       size = flash_init();
-       display_flash_config(size);
-       bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;
-       bd->bi_flashsize = size;
-
-#if CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE
-       bd->bi_flashoffset = monitor_flash_len; /* reserved area for U-Boot */
-#else
-       bd->bi_flashoffset = 0;
-#endif
-#else
-       bd->bi_flashstart = 0;
-       bd->bi_flashsize = 0;
-       bd->bi_flashoffset = 0;
-#endif
-
-#ifdef CONFIG_CMD_NAND
-       puts("NAND:  ");
-       nand_init();            /* go init the NAND */
-#endif
-
-#if defined(CONFIG_CMD_ONENAND)
-       onenand_init();
-#endif
-
-       /* relocate environment function pointers etc. */
-       env_relocate();
-
-#if defined(CONFIG_PCI)
-       /*
-        * Do pci configuration
-        */
-       pci_init();
-#endif
-
-/** leave this here (after malloc(), environment and PCI are working) **/
-       /* Initialize stdio devices */
-       stdio_init();
-
-       jumptable_init();
-
-       /* Initialize the console (after the relocation and devices init) */
-       console_init_r();
-/** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** **/
-
-       /* Initialize from environment */
-       load_addr = getenv_ulong("loadaddr", 16, load_addr);
-
-#ifdef CONFIG_CMD_SPI
-       puts("SPI:   ");
-       spi_init();             /* go init the SPI */
-       puts("ready\n");
-#endif
-
-#if defined(CONFIG_MISC_INIT_R)
-       /* miscellaneous platform dependent initialisations */
-       misc_init_r();
-#endif
-
-#ifdef CONFIG_BITBANGMII
-       bb_miiphy_init();
-#endif
-#if defined(CONFIG_CMD_NET)
-       puts("Net:   ");
-       eth_initialize(gd->bd);
-#endif
-
-       /* main_loop() can return to retry autoboot, if so just run it again. */
-       for (;;)
-               main_loop();
-
-       /* NOTREACHED - no way out of command loop except booting */
-}