ntb: intel: remove b2b memory window workaround for Skylake NTB

The workaround code is never used because Skylake NTB does not need it.

Reported-by: Allen Hubbe <allen.hubbe@dell.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>

diff --git a/drivers/ntb/hw/intel/ntb_hw_intel.c b/drivers/ntb/hw/intel/ntb_hw_intel.c
index 2557e2c05b90c8ca770d176f0cde26162b9a2df5..4de074a86073604abc59353fb509c55f5ef0b4cf 100644 (file)
--- a/drivers/ntb/hw/intel/ntb_hw_intel.c
+++ b/drivers/ntb/hw/intel/ntb_hw_intel.c
@@ -1742,89 +1742,18 @@ static int skx_setup_b2b_mw(struct intel_ntb_dev *ndev,
 {
        struct pci_dev *pdev;
        void __iomem *mmio;
-       resource_size_t bar_size;
        phys_addr_t bar_addr;
-       int b2b_bar;
-       u8 bar_sz;
 
        pdev = ndev->ntb.pdev;
        mmio = ndev->self_mmio;
 
-       if (ndev->b2b_idx == UINT_MAX) {
-               dev_dbg(&pdev->dev, "not using b2b mw\n");
-               b2b_bar = 0;
-               ndev->b2b_off = 0;
-       } else {
-               b2b_bar = ndev_mw_to_bar(ndev, ndev->b2b_idx);
-               if (b2b_bar < 0)
-                       return -EIO;
-
-               dev_dbg(&pdev->dev, "using b2b mw bar %d\n", b2b_bar);
-
-               bar_size = pci_resource_len(ndev->ntb.pdev, b2b_bar);
-
-               dev_dbg(&pdev->dev, "b2b bar size %#llx\n", bar_size);
-
-               if (b2b_mw_share && ((bar_size >> 1) >= XEON_B2B_MIN_SIZE)) {
-                       dev_dbg(&pdev->dev, "b2b using first half of bar\n");
-                       ndev->b2b_off = bar_size >> 1;
-               } else if (bar_size >= XEON_B2B_MIN_SIZE) {
-                       dev_dbg(&pdev->dev, "b2b using whole bar\n");
-                       ndev->b2b_off = 0;
-                       --ndev->mw_count;
-               } else {
-                       dev_dbg(&pdev->dev, "b2b bar size is too small\n");
-                       return -EIO;
-               }
-       }
-
-       /*
-        * Reset the secondary bar sizes to match the primary bar sizes,
-        * except disable or halve the size of the b2b secondary bar.
-        */
-       pci_read_config_byte(pdev, SKX_IMBAR1SZ_OFFSET, &bar_sz);
-       dev_dbg(&pdev->dev, "IMBAR1SZ %#x\n", bar_sz);
-       if (b2b_bar == 1) {
-               if (ndev->b2b_off)
-                       bar_sz -= 1;
-               else
-                       bar_sz = 0;
-       }
-
-       pci_write_config_byte(pdev, SKX_EMBAR1SZ_OFFSET, bar_sz);
-       pci_read_config_byte(pdev, SKX_EMBAR1SZ_OFFSET, &bar_sz);
-       dev_dbg(&pdev->dev, "EMBAR1SZ %#x\n", bar_sz);
-
-       pci_read_config_byte(pdev, SKX_IMBAR2SZ_OFFSET, &bar_sz);
-       dev_dbg(&pdev->dev, "IMBAR2SZ %#x\n", bar_sz);
-       if (b2b_bar == 2) {
-               if (ndev->b2b_off)
-                       bar_sz -= 1;
-               else
-                       bar_sz = 0;
-       }
-
-       pci_write_config_byte(pdev, SKX_EMBAR2SZ_OFFSET, bar_sz);
-       pci_read_config_byte(pdev, SKX_EMBAR2SZ_OFFSET, &bar_sz);
-       dev_dbg(&pdev->dev, "EMBAR2SZ %#x\n", bar_sz);
-
-       /* SBAR01 hit by first part of the b2b bar */
-       if (b2b_bar == 0)
-               bar_addr = addr->bar0_addr;
-       else if (b2b_bar == 1)
-               bar_addr = addr->bar2_addr64;
-       else if (b2b_bar == 2)
-               bar_addr = addr->bar4_addr64;
-       else
-               return -EIO;
-
        /* setup incoming bar limits == base addrs (zero length windows) */
-       bar_addr = addr->bar2_addr64 + (b2b_bar == 1 ? ndev->b2b_off : 0);
+       bar_addr = addr->bar2_addr64;
        iowrite64(bar_addr, mmio + SKX_IMBAR1XLMT_OFFSET);
        bar_addr = ioread64(mmio + SKX_IMBAR1XLMT_OFFSET);
        dev_dbg(&pdev->dev, "IMBAR1XLMT %#018llx\n", bar_addr);
 
-       bar_addr = addr->bar4_addr64 + (b2b_bar == 2 ? ndev->b2b_off : 0);
+       bar_addr = addr->bar4_addr64;
        iowrite64(bar_addr, mmio + SKX_IMBAR2XLMT_OFFSET);
        bar_addr = ioread64(mmio + SKX_IMBAR2XLMT_OFFSET);
        dev_dbg(&pdev->dev, "IMBAR2XLMT %#018llx\n", bar_addr);