-#
+#
# Copyright (C) 2006 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
BOARDNAME:=OLPC XO-1
FEATURES:=squashfs ext2
-LINUX_VERSION:=2.6.23.17
+LINUX_VERSION:=2.6.26.5
include $(INCLUDE_DIR)/target.mk
DEFAULT_PACKAGES += kmod-natsemi kmod-ne2k-pci
-# CONFIG_60XX_WDT is not set
-# CONFIG_8139TOO is not set
-CONFIG_AC97_BUS=m
-# CONFIG_ACPI is not set
-# CONFIG_ACQUIRE_WDT is not set
-# CONFIG_ADVANTECH_WDT is not set
-# CONFIG_AGP is not set
-# CONFIG_AIRO is not set
-# CONFIG_ALIM1535_WDT is not set
-# CONFIG_ALIM7101_WDT is not set
-# CONFIG_APM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_ATM is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_BACKLIGHT_PROGEAR is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_BATTERY_DS2760 is not set
-CONFIG_BATTERY_OLPC=y
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_MISC=y
-CONFIG_BITREVERSE=y
-CONFIG_BLK_DEV_GENERIC=m
-CONFIG_BLK_DEV_IDE=m
-CONFIG_BLK_DEV_IDEDISK=m
-CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_SC1200=m
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_BLK_DEV_VIA82CXXX=m
-# CONFIG_BONDING is not set
-CONFIG_BOUNCE=y
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-# CONFIG_BT is not set
-CONFIG_CFG80211=m
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CIFS is not set
-CONFIG_CLOCKSOURCE_WATCHDOG=y
-CONFIG_COMPAT_VDSO=y
-# CONFIG_CPU5_WDT is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CRC_ITU_T is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_AES_586 is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_TWOFISH_586 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CS5535_GPIO is not set
-# CONFIG_DCDBAS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DELL_RBU is not set
-CONFIG_DEVPORT=y
-# CONFIG_DISABLE_CONSOLE_SUSPEND is not set
-CONFIG_DISPLAY_SUPPORT=y
-CONFIG_DMI=y
-CONFIG_DMIID=y
-CONFIG_DNOTIFY=y
-CONFIG_DOUBLEFAULT=y
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_E100 is not set
-CONFIG_EARLY_PRINTK=y
-# CONFIG_EDAC is not set
-# CONFIG_EDD is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_ELF_CORE=y
-# CONFIG_EUROTECH_WDT is not set
-CONFIG_EXT2_FS=y
-# CONFIG_EXT3_FS is not set
-CONFIG_FB=y
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_ARC is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_BACKLIGHT is not set
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_CYBLA is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_DEFERRED_IO=y
-CONFIG_FB_GEODE=y
-CONFIG_FB_GEODE_GX=y
-# CONFIG_FB_GEODE_GX1 is not set
-# CONFIG_FB_GEODE_GX_SET_FBSIZE is not set
-CONFIG_FB_GEODE_LX=y
-# CONFIG_FB_HECUBA is not set
-# CONFIG_FB_HGA is not set
-# CONFIG_FB_I810 is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_INTEL is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_LE80578 is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_NVIDIA is not set
-CONFIG_FB_OLPC_DCON=y
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_VESA is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FIRMWARE_EDID is not set
-CONFIG_FIX_EARLYCON_MEM=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x16=y
-CONFIG_FONT_8x8=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GEODE_MFGPT_TIMER=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_HANGCHECK_TIMER is not set
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-# CONFIG_HERMES is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_HFS_FS is not set
-CONFIG_HIBERNATION=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
-CONFIG_HID=y
-CONFIG_HID_SUPPORT=y
-# CONFIG_HIGHMEM4G is not set
-# CONFIG_HIGHMEM64G is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_HPET_TIMER is not set
-CONFIG_HT_IRQ=y
-# CONFIG_HUGETLBFS is not set
-CONFIG_HW_CONSOLE=y
-CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_AMD is not set
-CONFIG_HW_RANDOM_GEODE=y
-# CONFIG_HW_RANDOM_INTEL is not set
-CONFIG_HW_RANDOM_VIA=y
-CONFIG_I2C=y
-# CONFIG_I2C_ALGOBIT is not set
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-# CONFIG_I6300ESB_WDT is not set
-# CONFIG_I8K is not set
-# CONFIG_IB700_WDT is not set
-# CONFIG_IBMASR is not set
-# CONFIG_IBM_ASM is not set
-CONFIG_IDE=m
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-CONFIG_IDEPCI_SHARE_IRQ=y
-# CONFIG_IDE_ARM is not set
-CONFIG_IDE_GENERIC=m
-# CONFIG_IDE_PROC_FS is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INPUT=y
-# CONFIG_INPUT_EVDEV is not set
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_INPUT_MOUSE=y
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-CONFIG_INSTRUMENTATION=y
-# CONFIG_IPV6 is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_NF_MATCH_AH is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_IPP2P is not set
-# CONFIG_IP_NF_MATCH_OWNER is not set
-# CONFIG_IP_NF_MATCH_RECENT is not set
-# CONFIG_IP_NF_MATCH_TIME is not set
-# CONFIG_IP_NF_MATCH_TOS is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_SET is not set
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_IMQ is not set
-# CONFIG_IP_NF_TARGET_LOG is not set
-# CONFIG_IP_NF_TARGET_NETMAP is not set
-# CONFIG_IP_NF_TARGET_REDIRECT is not set
-# CONFIG_IP_NF_TARGET_TOS is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-# CONFIG_IP_NF_TARGET_ULOG is not set
-# CONFIG_ISA is not set
-CONFIG_ISA_DMA_API=y
-# CONFIG_ISDN is not set
-# CONFIG_ISO9660_FS is not set
-# CONFIG_ITCO_WDT is not set
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-CONFIG_KALLSYMS=y
-CONFIG_KEXEC=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_KMOD=y
-# CONFIG_KPROBES is not set
-CONFIG_KTIME_SCALAR=y
-# CONFIG_KVM is not set
-CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LEDS_ALIX is not set
-CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_LOGO is not set
-# CONFIG_M386 is not set
-# CONFIG_M486 is not set
-# CONFIG_M586 is not set
-# CONFIG_M586MMX is not set
-# CONFIG_M586TSC is not set
-# CONFIG_M686 is not set
-# CONFIG_MACHZ_WDT is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_MCA is not set
-# CONFIG_MCORE2 is not set
-# CONFIG_MCRUSOE is not set
-# CONFIG_MCYRIXIII is not set
-# CONFIG_MEFFICEON is not set
-# CONFIG_MGEODEGX1 is not set
-CONFIG_MGEODE_LX=y
-CONFIG_MICROCODE=y
-CONFIG_MICROCODE_OLD_INTERFACE=y
-# CONFIG_MINIX_FS is not set
-# CONFIG_MK6 is not set
-# CONFIG_MK7 is not set
-# CONFIG_MK8 is not set
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_SDHCI=y
-# CONFIG_MMC_TIFM_SD is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-# CONFIG_MMC_WBSD is not set
-CONFIG_MODVERSIONS=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_OLPC=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MPENTIUM4 is not set
-# CONFIG_MPENTIUMII is not set
-# CONFIG_MPENTIUMIII is not set
-# CONFIG_MPENTIUMM is not set
-# CONFIG_MSDOS_FS is not set
-CONFIG_MTD=y
-# CONFIG_MTD_ABSENT is not set
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_BLOCK2MTD=y
-# CONFIG_MTD_CFI is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MTDRAM is not set
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_CAFE=y
-# CONFIG_MTD_NAND_CS553X is not set
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_ONENAND is not set
-CONFIG_MTD_OOPS=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_PCI=y
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_PLATRAM is not set
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_TS5500 is not set
-# CONFIG_MTRR is not set
-# CONFIG_MVIAC3_2 is not set
-# CONFIG_MVIAC7 is not set
-# CONFIG_MWINCHIP2 is not set
-# CONFIG_MWINCHIP3D is not set
-# CONFIG_MWINCHIPC6 is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_PORTSCAN is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_TARGET_CHAOS is not set
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_DELUDE is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-# CONFIG_NETFILTER_XT_TARGET_TARPIT is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_KEY is not set
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_SCH_DSMARK is not set
-# CONFIG_NET_SCH_ESFQ is not set
-# CONFIG_NET_SCH_GRED is not set
-# CONFIG_NET_SCH_HFSC is not set
-# CONFIG_NET_SCH_HTB is not set
-# CONFIG_NET_SCH_INGRESS is not set
-# CONFIG_NET_SCH_RED is not set
-# CONFIG_NET_SCH_SFQ is not set
-# CONFIG_NET_SCH_TBF is not set
-# CONFIG_NET_SCH_TEQL is not set
-CONFIG_NET_VENDOR_3COM=y
-# CONFIG_NFSD is not set
-# CONFIG_NFS_FS is not set
-# CONFIG_NF_CONNTRACK_AMANDA is not set
-# CONFIG_NF_CONNTRACK_H323 is not set
-# CONFIG_NF_CONNTRACK_PPTP is not set
-# CONFIG_NF_CONNTRACK_RTSP is not set
-# CONFIG_NF_CONNTRACK_SIP is not set
-# CONFIG_NF_NAT_AMANDA is not set
-# CONFIG_NF_NAT_H323 is not set
-# CONFIG_NF_NAT_PPTP is not set
-# CONFIG_NF_NAT_RTSP is not set
-# CONFIG_NF_NAT_SIP is not set
-# CONFIG_NF_NAT_SNMP_BASIC is not set
-# CONFIG_NLS is not set
-CONFIG_NOHIGHMEM=y
-CONFIG_NR_QUICK=1
-CONFIG_NSC_GPIO=m
-CONFIG_NVRAM=y
-CONFIG_OLPC=y
-CONFIG_OLPC_PM=y
-CONFIG_OPEN_FIRMWARE=y
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PARAVIRT is not set
-CONFIG_PC8736x_GPIO=m
-# CONFIG_PC87413_WDT is not set
-CONFIG_PCI=y
-# CONFIG_PCIEPORTBUS is not set
-# CONFIG_PCIPCWATCHDOG is not set
-CONFIG_PCI_DIRECT=y
-# CONFIG_PCI_GOANY is not set
-# CONFIG_PCI_GOBIOS is not set
-# CONFIG_PCI_GODIRECT is not set
-# CONFIG_PCI_GOMMCONFIG is not set
-CONFIG_PCI_GOOLPC=y
-# CONFIG_PCI_MSI is not set
-CONFIG_PCI_OLPC=y
-# CONFIG_PDA_POWER is not set
-CONFIG_PHYSICAL_ALIGN=0x100000
-CONFIG_PHYSICAL_START=0x100000
-CONFIG_PM=y
-CONFIG_PM_DEBUG=y
-CONFIG_PM_LEGACY=y
-CONFIG_PM_SLEEP=y
-CONFIG_PM_STD_PARTITION=""
-# CONFIG_PM_TRACE is not set
-# CONFIG_PM_VERBOSE is not set
-CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PREEMPT_NONE is not set
-CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PRISM54 is not set
-# CONFIG_PROMFS_FS is not set
-CONFIG_QUICKLIST=y
-CONFIG_REED_SOLOMON=y
-CONFIG_REED_SOLOMON_DEC16=y
-CONFIG_RELAY=y
-# CONFIG_RELOCATABLE is not set
-CONFIG_RTC=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_SBC8360_WDT is not set
-# CONFIG_SBC_EPX_C3_WATCHDOG is not set
-# CONFIG_SC1200_WDT is not set
-# CONFIG_SC520_WDT is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_WAIT_SCAN=m
-# CONFIG_SCx200 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_SDIO_UART is not set
-CONFIG_SEMAPHORE_SLEEPERS=y
-# CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_CT82C710 is not set
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SMP is not set
-# CONFIG_SMSC37B787_WDT is not set
-CONFIG_SND_AC97_CODEC=m
-# CONFIG_SND_CS5530 is not set
-CONFIG_SND_CS5535AUDIO=m
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_SONYPI is not set
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_SUSPEND=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_TELCLOCK is not set
-CONFIG_TICK_ONESHOT=y
-# CONFIG_TOSHIBA is not set
-# CONFIG_TUN is not set
-# CONFIG_TYPHOON is not set
-# CONFIG_UDF_FS is not set
-CONFIG_UID16=y
-CONFIG_USB=y
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_SPLIT_ISO=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_R8A66597_HCD is not set
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_SUSPEND is not set
-CONFIG_USB_UHCI_HCD=y
-# CONFIG_USER_NS is not set
-# CONFIG_VFAT_FS is not set
-CONFIG_VGACON_SOFT_SCROLLBACK=y
-CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
-# CONFIG_VGASTATE is not set
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGA_NOPROBE is not set
-# CONFIG_VIA_RHINE is not set
-CONFIG_VIDEO_SELECT=y
-CONFIG_VIRTUALIZATION=y
-CONFIG_VM86=y
-# CONFIG_VMSPLIT_1G is not set
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_2G_OPT is not set
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_3G_OPT is not set
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_VORTEX is not set
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_WAFER_WDT is not set
-CONFIG_X86=y
-CONFIG_X86_32=y
-# CONFIG_X86_BIGSMP is not set
-CONFIG_X86_BIOS_REBOOT=y
-CONFIG_X86_BSWAP=y
-CONFIG_X86_CMPXCHG=y
-# CONFIG_X86_CPUID is not set
-# CONFIG_X86_ELAN is not set
-# CONFIG_X86_ES7000 is not set
-CONFIG_X86_FIND_SMP_CONFIG=y
-CONFIG_X86_GENERIC=y
-# CONFIG_X86_GENERICARCH is not set
-CONFIG_X86_INTEL_USERCOPY=y
-CONFIG_X86_INVLPG=y
-CONFIG_X86_IO_APIC=y
-CONFIG_X86_L1_CACHE_SHIFT=7
-CONFIG_X86_LOCAL_APIC=y
-# CONFIG_X86_MCE is not set
-CONFIG_X86_MINIMUM_CPU_FAMILY=4
-CONFIG_X86_MPPARSE=y
-# CONFIG_X86_MSR is not set
-# CONFIG_X86_NUMAQ is not set
-# CONFIG_X86_PAE is not set
-CONFIG_X86_PC=y
-CONFIG_X86_POPAD_OK=y
-# CONFIG_X86_REBOOTFIXUPS is not set
-# CONFIG_X86_SUMMIT is not set
-CONFIG_X86_TSC=y
-CONFIG_X86_UP_APIC=y
-CONFIG_X86_UP_IOAPIC=y
-CONFIG_X86_USE_3DNOW=y
-CONFIG_X86_USE_PPRO_CHECKSUM=y
-# CONFIG_X86_VISWS is not set
-# CONFIG_X86_VOYAGER is not set
-CONFIG_X86_WP_WORKS_OK=y
-CONFIG_X86_XADD=y
-# CONFIG_XFS_FS is not set
--- /dev/null
+CONFIG_4KSTACKS=y
+# CONFIG_64BIT is not set
+CONFIG_AC97_BUS=m
+CONFIG_ACPI=y
+CONFIG_ACPI_AC=y
+# CONFIG_ACPI_ASUS is not set
+CONFIG_ACPI_BATTERY=y
+CONFIG_ACPI_BLACKLIST_YEAR=0
+CONFIG_ACPI_BUTTON=y
+# CONFIG_ACPI_CONTAINER is not set
+# CONFIG_ACPI_CUSTOM_DSDT is not set
+# CONFIG_ACPI_DEBUG is not set
+# CONFIG_ACPI_DOCK is not set
+CONFIG_ACPI_EC=y
+CONFIG_ACPI_FAN=y
+CONFIG_ACPI_POWER=y
+CONFIG_ACPI_PROCESSOR=y
+# CONFIG_ACPI_PROCFS is not set
+CONFIG_ACPI_PROCFS_POWER=y
+CONFIG_ACPI_PROC_EVENT=y
+# CONFIG_ACPI_SBS is not set
+CONFIG_ACPI_SLEEP=y
+CONFIG_ACPI_SYSFS_POWER=y
+CONFIG_ACPI_SYSTEM=y
+CONFIG_ACPI_THERMAL=y
+# CONFIG_ACPI_TOSHIBA is not set
+# CONFIG_ACPI_WMI is not set
+# CONFIG_AGP is not set
+# CONFIG_AIRO is not set
+# CONFIG_APM is not set
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
+CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_ARCH_HAS_CPU_RELAX=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_ATM is not set
+# CONFIG_ATMEL is not set
+# CONFIG_AUDIT_ARCH is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_BACKLIGHT_PROGEAR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_BATTERY_DS2760 is not set
+CONFIG_BATTERY_OLPC=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+CONFIG_BITREVERSE=y
+# CONFIG_BLK_DEV is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+# CONFIG_BONDING is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+CONFIG_BOUNCE=y
+# CONFIG_BT is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_CFG80211=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_CLASSIC_RCU=y
+CONFIG_CLOCKSOURCE_WATCHDOG=y
+CONFIG_COMPAT_VDSO=y
+# CONFIG_CPA_DEBUG is not set
+CONFIG_CPU_FREQ=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_IDLE is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_AES_586 is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_ECB is not set
+CONFIG_CRYPTO_GF128MUL=m
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_SALSA20_586 is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_TWOFISH_586 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CS5535_GPIO is not set
+# CONFIG_DCDBAS is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_INFO is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_NX_TEST is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUG_RODATA is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEFAULT_IO_DELAY_TYPE=0
+# CONFIG_DELL_RBU is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_DEVPORT=y
+CONFIG_DISPLAY_SUPPORT=y
+# CONFIG_DMADEVICES is not set
+CONFIG_DMI=y
+CONFIG_DMIID=y
+CONFIG_DOUBLEFAULT=y
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_EDAC is not set
+# CONFIG_EDD is not set
+# CONFIG_EFI is not set
+CONFIG_ELF_CORE=y
+CONFIG_EXT2_FS=y
+# CONFIG_EXT3_FS is not set
+CONFIG_FAST_CMPXCHG_LOCAL=y
+# CONFIG_FAULT_INJECTION is not set
+CONFIG_FB=y
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_ARC is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_CYBLA is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_EFI is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_GEODE=y
+# CONFIG_FB_GEODE_GX is not set
+# CONFIG_FB_GEODE_GX1 is not set
+CONFIG_FB_GEODE_LX=y
+# CONFIG_FB_HGA is not set
+# CONFIG_FB_I810 is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_INTEL is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_LE80578 is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_N411 is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_VESA is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FIRMWARE_EDID is not set
+CONFIG_FIX_EARLYCON_MEM=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x16=y
+CONFIG_FONT_8x8=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+# CONFIG_FRAME_POINTER is not set
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+# CONFIG_GENERIC_CPU is not set
+CONFIG_GENERIC_FIND_FIRST_BIT=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_GENERIC_LOCKBREAK is not set
+# CONFIG_GENERIC_TIME_VSYSCALL is not set
+CONFIG_GEODE_MFGPT_TIMER=y
+# CONFIG_HAMRADIO is not set
+# CONFIG_HANGCHECK_TIMER is not set
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_KVM=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
+# CONFIG_HERMES is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_HFS_FS is not set
+CONFIG_HIBERNATION=y
+CONFIG_HID=y
+CONFIG_HID_SUPPORT=y
+# CONFIG_HIGHMEM4G is not set
+# CONFIG_HIGHMEM64G is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_HPET is not set
+CONFIG_HPET_EMULATE_RTC=y
+CONFIG_HPET_TIMER=y
+CONFIG_HT_IRQ=y
+# CONFIG_HUGETLBFS is not set
+CONFIG_HW_CONSOLE=y
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_AMD is not set
+CONFIG_HW_RANDOM_GEODE=y
+# CONFIG_HW_RANDOM_INTEL is not set
+CONFIG_HW_RANDOM_VIA=y
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I8K is not set
+# CONFIG_IDE is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_IFB is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INPUT=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_INPUT_MOUSE=y
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1200
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=900
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_IO_DELAY_0X80=y
+# CONFIG_IO_DELAY_0XED is not set
+# CONFIG_IO_DELAY_NONE is not set
+CONFIG_IO_DELAY_TYPE_0X80=0
+CONFIG_IO_DELAY_TYPE_0XED=1
+CONFIG_IO_DELAY_TYPE_NONE=3
+CONFIG_IO_DELAY_TYPE_UDELAY=2
+# CONFIG_IO_DELAY_UDELAY is not set
+# CONFIG_IPV6 is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_IPP2P is not set
+# CONFIG_IP_NF_MATCH_RECENT is not set
+# CONFIG_IP_NF_MATCH_TIME is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_SET is not set
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_LOG is not set
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+# CONFIG_IP_NF_TARGET_ULOG is not set
+# CONFIG_ISA is not set
+CONFIG_ISA_DMA_API=y
+# CONFIG_ISCSI_IBFT_FIND is not set
+# CONFIG_ISDN is not set
+# CONFIG_ISO9660_FS is not set
+# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KEXEC=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KGDB is not set
+CONFIG_KMOD=y
+# CONFIG_KPROBES is not set
+CONFIG_KTIME_SCALAR=y
+# CONFIG_LATENCYTOP is not set
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LEDS_ALIX is not set
+# CONFIG_LEDS_CLEVO_MAIL is not set
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_DEBUG=y
+# CONFIG_LIBERTAS_SDIO is not set
+CONFIG_LIBERTAS_USB=m
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_LOCK_STAT is not set
+# CONFIG_LOGO is not set
+# CONFIG_M386 is not set
+# CONFIG_M486 is not set
+# CONFIG_M586 is not set
+# CONFIG_M586MMX is not set
+# CONFIG_M586TSC is not set
+# CONFIG_M686 is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_MARKERS=y
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_MCA is not set
+# CONFIG_MCORE2 is not set
+# CONFIG_MCRUSOE is not set
+# CONFIG_MCYRIXIII is not set
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+# CONFIG_MEFFICEON is not set
+# CONFIG_MGEODEGX1 is not set
+CONFIG_MGEODE_LX=y
+CONFIG_MICROCODE=y
+CONFIG_MICROCODE_OLD_INTERFACE=y
+# CONFIG_MINIX_FS is not set
+# CONFIG_MISC_DEVICES is not set
+# CONFIG_MK6 is not set
+# CONFIG_MK7 is not set
+# CONFIG_MK8 is not set
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_RICOH_MMC is not set
+CONFIG_MMC_SDHCI=y
+# CONFIG_MMC_TIFM_SD is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_WBSD is not set
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MPENTIUM4 is not set
+# CONFIG_MPENTIUMII is not set
+# CONFIG_MPENTIUMIII is not set
+# CONFIG_MPENTIUMM is not set
+# CONFIG_MPSC is not set
+# CONFIG_MSDOS_FS is not set
+CONFIG_MTD=y
+# CONFIG_MTD_ABSENT is not set
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_BLOCK2MTD=y
+# CONFIG_MTD_CFI is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_ONENAND is not set
+CONFIG_MTD_OOPS=m
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_PCI=y
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_PLATRAM is not set
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_TS5500 is not set
+# CONFIG_MTRR is not set
+# CONFIG_MVIAC3_2 is not set
+# CONFIG_MVIAC7 is not set
+# CONFIG_MWINCHIP2 is not set
+# CONFIG_MWINCHIP3D is not set
+# CONFIG_MWINCHIPC6 is not set
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_PORTSCAN is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_CHAOS is not set
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_DELUDE is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+# CONFIG_NETFILTER_XT_TARGET_TARPIT is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_KEY is not set
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_SCH_DSMARK is not set
+# CONFIG_NET_SCH_ESFQ is not set
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_HFSC is not set
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_INGRESS is not set
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TBF is not set
+# CONFIG_NET_SCH_TEQL is not set
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+# CONFIG_NF_CONNTRACK_H323 is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+# CONFIG_NF_CONNTRACK_RTSP is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_H323 is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_RTSP is not set
+# CONFIG_NF_NAT_SIP is not set
+# CONFIG_NF_NAT_SNMP_BASIC is not set
+CONFIG_NL80211=y
+# CONFIG_NLS is not set
+CONFIG_NOHIGHMEM=y
+# CONFIG_NONPROMISC_DEVMEM is not set
+CONFIG_NO_HZ=y
+CONFIG_NSC_GPIO=m
+CONFIG_NVRAM=y
+# CONFIG_OCF_OCF is not set
+CONFIG_OLPC=y
+CONFIG_OPROFILE=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PARAVIRT_GUEST is not set
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_PC8736x_GPIO=m
+CONFIG_PCI=y
+# CONFIG_PCIEPORTBUS is not set
+# CONFIG_PCI_DEBUG is not set
+CONFIG_PCI_DIRECT=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_GOANY is not set
+# CONFIG_PCI_GOBIOS is not set
+# CONFIG_PCI_GODIRECT is not set
+# CONFIG_PCI_GOMMCONFIG is not set
+CONFIG_PCI_GOOLPC=y
+CONFIG_PCI_OLPC=y
+CONFIG_PCSPKR_PLATFORM=y
+# CONFIG_PDA_POWER is not set
+CONFIG_PHYSICAL_ALIGN=0x100000
+CONFIG_PHYSICAL_START=0x100000
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+CONFIG_PM_SLEEP=y
+CONFIG_PM_STD_PARTITION=""
+# CONFIG_PM_TRACE_RTC is not set
+# CONFIG_PM_VERBOSE is not set
+CONFIG_PNP=y
+CONFIG_PNPACPI=y
+# CONFIG_PNP_DEBUG is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PPP is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PRISM54 is not set
+CONFIG_PROFILING=y
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RELAY=y
+# CONFIG_RELOCATABLE is not set
+# CONFIG_RFKILL is not set
+CONFIG_RTC=y
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_SCHEDSTATS=y
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHED_HRTICK=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCSI=y
+CONFIG_SCSI_WAIT_SCAN=m
+# CONFIG_SCx200 is not set
+# CONFIG_SCx200_ACB is not set
+# CONFIG_SDIO_UART is not set
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
+CONFIG_SERIO=y
+# CONFIG_SERIO_CT82C710 is not set
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_RAW is not set
+CONFIG_SERIO_SERPORT=y
+CONFIG_SLAB=y
+CONFIG_SLABINFO=y
+# CONFIG_SLUB is not set
+# CONFIG_SMP is not set
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_POWER_SAVE=y
+CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
+CONFIG_SND_CS5535AUDIO=m
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCSP is not set
+# CONFIG_SND_SIS7019 is not set
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SONYPI is not set
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SSB_POSSIBLE=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_TELCLOCK is not set
+CONFIG_THERMAL=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_TIMER_STATS=y
+# CONFIG_TOSHIBA is not set
+# CONFIG_TUN is not set
+# CONFIG_UDF_FS is not set
+CONFIG_UID16=y
+CONFIG_USB=y
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_CATC is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_HID is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_PWC is not set
+# CONFIG_USB_SERIAL is not set
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_UHCI_HCD=y
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_V4L_USB_DRIVERS=y
+# CONFIG_VFAT_FS is not set
+CONFIG_VGACON_SOFT_SCROLLBACK=y
+CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+# CONFIG_VGASTATE is not set
+CONFIG_VGA_CONSOLE=y
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_CAFE_CCIC=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_CPIA2 is not set
+CONFIG_VIDEO_MEDIA=m
+CONFIG_VIDEO_OV7670=m
+CONFIG_VIDEO_OVCAMCHIP=m
+CONFIG_VIDEO_SELECT=y
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VM86=y
+# CONFIG_VMSPLIT_1G is not set
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_2G_OPT is not set
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_3G_OPT is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_W1 is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_X86=y
+CONFIG_X86_32=y
+# CONFIG_X86_64 is not set
+# CONFIG_X86_ACPI_CPUFREQ is not set
+# CONFIG_X86_BIGSMP is not set
+CONFIG_X86_BIOS_REBOOT=y
+CONFIG_X86_BSWAP=y
+CONFIG_X86_CMPXCHG=y
+CONFIG_X86_CPU=y
+# CONFIG_X86_CPUFREQ_NFORCE2 is not set
+# CONFIG_X86_CPUID is not set
+CONFIG_X86_DEBUGCTLMSR=y
+# CONFIG_X86_ELAN is not set
+# CONFIG_X86_ES7000 is not set
+# CONFIG_X86_E_POWERSAVER is not set
+CONFIG_X86_FIND_SMP_CONFIG=y
+CONFIG_X86_GENERIC=y
+# CONFIG_X86_GENERICARCH is not set
+# CONFIG_X86_GX_SUSPMOD is not set
+CONFIG_X86_INTEL_USERCOPY=y
+CONFIG_X86_INVLPG=y
+CONFIG_X86_IO_APIC=y
+CONFIG_X86_L1_CACHE_SHIFT=7
+CONFIG_X86_LOCAL_APIC=y
+# CONFIG_X86_LONGHAUL is not set
+# CONFIG_X86_LONGRUN is not set
+# CONFIG_X86_MCE is not set
+CONFIG_X86_MINIMUM_CPU_FAMILY=4
+CONFIG_X86_MPPARSE=y
+# CONFIG_X86_MSR is not set
+# CONFIG_X86_NUMAQ is not set
+# CONFIG_X86_P4_CLOCKMOD is not set
+# CONFIG_X86_PAE is not set
+CONFIG_X86_PC=y
+CONFIG_X86_PM_TIMER=y
+CONFIG_X86_POPAD_OK=y
+# CONFIG_X86_POWERNOW_K6 is not set
+# CONFIG_X86_POWERNOW_K7 is not set
+# CONFIG_X86_POWERNOW_K8 is not set
+# CONFIG_X86_PTDUMP is not set
+# CONFIG_X86_RDC321X is not set
+# CONFIG_X86_REBOOTFIXUPS is not set
+# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
+# CONFIG_X86_SPEEDSTEP_ICH is not set
+# CONFIG_X86_SPEEDSTEP_LIB is not set
+# CONFIG_X86_SPEEDSTEP_SMI is not set
+# CONFIG_X86_SUMMIT is not set
+CONFIG_X86_TSC=y
+CONFIG_X86_UP_APIC=y
+CONFIG_X86_UP_IOAPIC=y
+CONFIG_X86_USE_3DNOW=y
+CONFIG_X86_USE_PPRO_CHECKSUM=y
+# CONFIG_X86_VISWS is not set
+# CONFIG_X86_VOYAGER is not set
+# CONFIG_X86_VSMP is not set
+CONFIG_X86_WP_WORKS_OK=y
+CONFIG_X86_XADD=y
+# CONFIG_XFS_FS is not set
+# CONFIG_ZONE_DMA32 is not set
--- /dev/null
+Index: linux-2.6.23.17/arch/i386/Kconfig
+===================================================================
+--- linux-2.6.23.17.orig/arch/i386/Kconfig
++++ linux-2.6.23.17/arch/i386/Kconfig
+@@ -796,6 +796,15 @@ config SECCOMP
+
+ If unsure, say Y. Only embedded should say N here.
+
++config VGA_NOPROBE
++ bool "Don't probe VGA at boot" if EMBEDDED
++ default n
++ help
++ Saying Y here will cause the kernel to not probe VGA at boot time.
++ This will break everything that depends on the probed screen
++ data. Say N here unless you are absolutely sure this is what you
++ want.
++
+ source kernel/Kconfig.hz
+
+ config KEXEC
+@@ -1120,6 +1129,9 @@ config PCI_GODIRECT
+ config PCI_GOANY
+ bool "Any"
+
++config PCI_GOOLPC
++ bool "OLPC"
++
+ endchoice
+
+ config PCI_BIOS
+@@ -1129,7 +1141,7 @@ config PCI_BIOS
+
+ config PCI_DIRECT
+ bool
+- depends on PCI && ((PCI_GODIRECT || PCI_GOANY) || X86_VISWS)
++ depends on PCI && ((PCI_GODIRECT || PCI_GOANY || PCI_GOOLPC) || X86_VISWS)
+ default y
+
+ config PCI_MMCONFIG
+@@ -1137,6 +1149,11 @@ config PCI_MMCONFIG
+ depends on PCI && ACPI && (PCI_GOMMCONFIG || PCI_GOANY)
+ default y
+
++config PCI_OLPC
++ bool
++ depends on PCI && PCI_GOOLPC
++ default y
++
+ source "drivers/pci/pcie/Kconfig"
+
+ source "drivers/pci/Kconfig"
+@@ -1206,10 +1223,43 @@ config SCx200HR_TIMER
+ processor goes idle (as is done by the scheduler). The
+ other workaround is idle=poll boot option.
+
++config GEODE_MFGPT_TIMER
++ bool "Geode Multi-Function General Purpose Timer (mfgpt) Support"
++ depends on MGEODE_LX && GENERIC_TIME && GENERIC_CLOCKEVENTS
++ default y
++ help
++ This driver provides a clock event source based on the MFGPT
++ timer(s) in the CS5535 and CS5536 companion chip for the geode.
++ MFGPTs have a better resolution and max interval than the
++ generic PIT, and are suitable for use as high-res timers.
++
+ config K8_NB
+ def_bool y
+ depends on AGP_AMD64
+
++config OLPC
++ bool "OLPC Support"
++ default n
++ help
++ Add support for detecting the unique features of the OLPC
++ Childrens Machine
++
++config OLPC_PM
++ tristate "OLPC power management support"
++ default y
++ depends on OLPC
++ help
++ Add support for the Geode power management facilities on the
++ OLPC Childrens Machine
++
++config OPEN_FIRMWARE
++ bool "Support for Open Firmware"
++ default y if OLPC
++ help
++ This option adds support for the implementation of Open Firmware
++ that is used on the OLPC Children's Machine.
++ If unsure, say N here.
++
+ source "drivers/pcmcia/Kconfig"
+
+ source "drivers/pci/hotplug/Kconfig"
+Index: linux-2.6.23.17/arch/i386/kernel/Makefile
+===================================================================
+--- linux-2.6.23.17.orig/arch/i386/kernel/Makefile
++++ linux-2.6.23.17/arch/i386/kernel/Makefile
+@@ -39,13 +39,17 @@ obj-$(CONFIG_VM86) += vm86.o
+ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+ obj-$(CONFIG_HPET_TIMER) += hpet.o
+ obj-$(CONFIG_K8_NB) += k8.o
+-obj-$(CONFIG_MGEODE_LX) += geode.o
++obj-$(CONFIG_MGEODE_LX) += geode.o mfgpt.o
+
+ obj-$(CONFIG_VMI) += vmi.o vmiclock.o
+ obj-$(CONFIG_PARAVIRT) += paravirt.o
+ obj-y += pcspeaker.o
+
+ obj-$(CONFIG_SCx200) += scx200.o
++obj-$(CONFIG_OLPC) += olpc.o
++obj-$(CONFIG_OLPC_PM) += olpc-pm.o olpc-wakeup.o
++obj-$(CONFIG_OPEN_FIRMWARE) += ofw.o
++obj-$(CONFIG_PROMFS_FS) += prom.o
+
+ # vsyscall.o contains the vsyscall DSO images as __initdata.
+ # We must build both images before we can assemble it.
+Index: linux-2.6.23.17/arch/i386/kernel/geode.c
+===================================================================
+--- linux-2.6.23.17.orig/arch/i386/kernel/geode.c
++++ linux-2.6.23.17/arch/i386/kernel/geode.c
+@@ -145,10 +145,14 @@ EXPORT_SYMBOL_GPL(geode_gpio_setup_event
+
+ static int __init geode_southbridge_init(void)
+ {
++ int timers;
++
+ if (!is_geode())
+ return -ENODEV;
+
+ init_lbars();
++ timers = geode_mfgpt_detect();
++ printk(KERN_INFO "geode-mfgpt: %d timers available.\n", timers);
+ return 0;
+ }
+
+Index: linux-2.6.23.17/arch/i386/kernel/head.S
+===================================================================
+--- linux-2.6.23.17.orig/arch/i386/kernel/head.S
++++ linux-2.6.23.17/arch/i386/kernel/head.S
+@@ -117,8 +117,34 @@ ENTRY(startup_32)
+ movl $(COMMAND_LINE_SIZE/4),%ecx
+ rep
+ movsl
++
++#ifdef CONFIG_OPEN_FIRMWARE
++/*
++ * If Open Firmware booted us, save the OFW client interface callback address
++ * and preserve the OFW page mappings by priming the kernel's new page
++ * directory area with a copy of the OFW page directory. That lets OFW stay
++ * resident in high memory (high in both the virtual and physical spaces)
++ * for at least long enough to copy out the device tree.
++ */
+ 1:
++ movl $(boot_params - __PAGE_OFFSET + OFW_INFO_OFFSET), %ebp
++ cmpl $0x2057464F, (%ebp) /* Magic number "OFW " */
++ jne 1f
++
++ mov 0x8(%ebp), %eax /* Save callback address */
++ mov %eax, call_firmware - __PAGE_OFFSET
++
++ /* Copy the OFW pdir into swapper_pg_dir */
++ movl %esi, %edx /* save %esi */
++ movl $(swapper_pg_dir - __PAGE_OFFSET), %edi
++ movl %cr3, %esi /* Source is current pg_dir base address */
++ movl $1024, %ecx /* Number of page directory entries */
++ rep
++ movsl
++ movl %edx, %esi /* restore %esi */
++#endif
+
++1:
+ /*
+ * Initialize page tables. This creates a PDE and a set of page
+ * tables, which are located immediately beyond _end. The variable
+@@ -129,6 +155,7 @@ ENTRY(startup_32)
+ * Warning: don't use %esi or the stack in this code. However, %esp
+ * can be used as a GPR if you really need it...
+ */
++
+ page_pde_offset = (__PAGE_OFFSET >> 20);
+
+ movl $(pg0 - __PAGE_OFFSET), %edi
+Index: linux-2.6.23.17/arch/i386/kernel/setup.c
+===================================================================
+--- linux-2.6.23.17.orig/arch/i386/kernel/setup.c
++++ linux-2.6.23.17/arch/i386/kernel/setup.c
+@@ -362,8 +362,10 @@ void __init zone_sizes_init(void)
+ {
+ unsigned long max_zone_pfns[MAX_NR_ZONES];
+ memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
++#ifdef CONFIG_ZONE_DMA
+ max_zone_pfns[ZONE_DMA] =
+ virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
++#endif
+ max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
+ #ifdef CONFIG_HIGHMEM
+ max_zone_pfns[ZONE_HIGHMEM] = highend_pfn;
+@@ -428,6 +430,9 @@ void __init setup_bootmem_allocator(void
+ */
+ acpi_reserve_bootmem();
+ #endif
++#ifdef CONFIG_OLPC_PM
++ reserve_bootmem(0xf0000, PAGE_SIZE);
++#endif
+ #ifdef CONFIG_X86_FIND_SMP_CONFIG
+ /*
+ * Find and reserve possible boot-time SMP configuration:
+Index: linux-2.6.23.17/arch/i386/pci/Makefile
+===================================================================
+--- linux-2.6.23.17.orig/arch/i386/pci/Makefile
++++ linux-2.6.23.17/arch/i386/pci/Makefile
+@@ -3,6 +3,7 @@ obj-y := i386.o init.o
+ obj-$(CONFIG_PCI_BIOS) += pcbios.o
+ obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o direct.o mmconfig-shared.o
+ obj-$(CONFIG_PCI_DIRECT) += direct.o
++obj-$(CONFIG_PCI_OLPC) += olpc.o
+
+ pci-y := fixup.o
+ pci-$(CONFIG_ACPI) += acpi.o
+Index: linux-2.6.23.17/arch/i386/pci/init.c
+===================================================================
+--- linux-2.6.23.17.orig/arch/i386/pci/init.c
++++ linux-2.6.23.17/arch/i386/pci/init.c
+@@ -14,6 +14,9 @@ static __init int pci_access_init(void)
+ #ifdef CONFIG_PCI_MMCONFIG
+ pci_mmcfg_init(type);
+ #endif
++#ifdef CONFIG_PCI_OLPC
++ pci_olpc_init();
++#endif
+ if (raw_pci_ops)
+ return 0;
+ #ifdef CONFIG_PCI_BIOS
+Index: linux-2.6.23.17/arch/i386/pci/pci.h
+===================================================================
+--- linux-2.6.23.17.orig/arch/i386/pci/pci.h
++++ linux-2.6.23.17/arch/i386/pci/pci.h
+@@ -93,6 +93,7 @@ extern void pci_direct_init(int type);
+ extern void pci_pcbios_init(void);
+ extern void pci_mmcfg_init(int type);
+ extern void pcibios_sort(void);
++extern void pci_olpc_init(void);
+
+ /* pci-mmconfig.c */
+
+Index: linux-2.6.23.17/drivers/Makefile
+===================================================================
+--- linux-2.6.23.17.orig/drivers/Makefile
++++ linux-2.6.23.17/drivers/Makefile
+@@ -23,6 +23,8 @@ obj-y += char/
+
+ obj-$(CONFIG_CONNECTOR) += connector/
+
++obj-$(CONFIG_SYSPROF) += sysprof/
++
+ # i810fb and intelfb depend on char/agp/
+ obj-$(CONFIG_FB_I810) += video/i810/
+ obj-$(CONFIG_FB_INTEL) += video/intelfb/
+Index: linux-2.6.23.17/drivers/char/vt_ioctl.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/char/vt_ioctl.c
++++ linux-2.6.23.17/drivers/char/vt_ioctl.c
+@@ -37,6 +37,9 @@
+ char vt_dont_switch;
+ extern struct tty_driver *console_driver;
+
++/* Add a notifier chain to inform drivers of a VT_TEXT/VT_GRAPHICS switch */
++RAW_NOTIFIER_HEAD(console_notifier_list);
++
+ #define VT_IS_IN_USE(i) (console_driver->ttys[i] && console_driver->ttys[i]->count)
+ #define VT_BUSY(i) (VT_IS_IN_USE(i) || i == fg_console || vc_cons[i].d == sel_cons)
+
+@@ -491,6 +494,14 @@ int vt_ioctl(struct tty_struct *tty, str
+ vc->vc_mode = (unsigned char) arg;
+ if (console != fg_console)
+ return 0;
++
++ /* Notify listeners if the current fg_console has switched */
++
++ raw_notifier_call_chain(&console_notifier_list,
++ (arg == KD_TEXT) ?
++ CONSOLE_EVENT_SWITCH_TEXT :
++ CONSOLE_EVENT_SWITCH_GRAPHICS, 0);
++
+ /*
+ * explicitly blank/unblank the screen if switching modes
+ */
+Index: linux-2.6.23.17/drivers/i2c/busses/scx200_acb.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/i2c/busses/scx200_acb.c
++++ linux-2.6.23.17/drivers/i2c/busses/scx200_acb.c
+@@ -46,6 +46,10 @@ static int base[MAX_DEVICES] = { 0x820,
+ module_param_array(base, int, NULL, 0);
+ MODULE_PARM_DESC(base, "Base addresses for the ACCESS.bus controllers");
+
++static unsigned int smbclk = 0x70;
++module_param(smbclk, uint, 0);
++MODULE_PARM_DESC(smbclk, "Specify the SMB_CLK value");
++
+ #define POLL_TIMEOUT (HZ/5)
+
+ enum scx200_acb_state {
+@@ -108,6 +112,7 @@ struct scx200_acb_iface {
+ #define ACBADDR (iface->base + 4)
+ #define ACBCTL2 (iface->base + 5)
+ #define ACBCTL2_ENABLE 0x01
++#define ACBCTL3 (iface->base + 6)
+
+ /************************************************************************/
+
+@@ -392,11 +397,13 @@ static __init int scx200_acb_probe(struc
+ {
+ u8 val;
+
+- /* Disable the ACCESS.bus device and Configure the SCL
+- frequency: 16 clock cycles */
+- outb(0x70, ACBCTL2);
++ /* Disable the ACCESS.bus device and Configure the SCL */
++
++ outb((smbclk & 0x7F) << 1, ACBCTL2);
++
++ outb((smbclk >> 7) & 0xFF, ACBCTL3);
+
+- if (inb(ACBCTL2) != 0x70) {
++ if (inb(ACBCTL2) != ((smbclk & 0x7F) << 1)) {
+ pr_debug(NAME ": ACBCTL2 readback failed\n");
+ return -ENXIO;
+ }
+Index: linux-2.6.23.17/drivers/input/keyboard/atkbd.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/input/keyboard/atkbd.c
++++ linux-2.6.23.17/drivers/input/keyboard/atkbd.c
+@@ -63,12 +63,25 @@ static int atkbd_extra;
+ module_param_named(extra, atkbd_extra, bool, 0);
+ MODULE_PARM_DESC(extra, "Enable extra LEDs and keys on IBM RapidAcces, EzKey and similar keyboards");
+
++#define ATKBD_KEY_UNKNOWN 0
++#define ATKBD_KEY_NULL 0xFF0000FF
++
++#define ATKBD_SCR_1 0xFF0000FE
++#define ATKBD_SCR_2 0xFF0000FD
++#define ATKBD_SCR_4 0xFF0000FC
++#define ATKBD_SCR_8 0xFF0000FB
++#define ATKBD_SCR_CLICK 0xFF0000FA
++#define ATKBD_SCR_LEFT 0xFF0000F9
++#define ATKBD_SCR_RIGHT 0xFF0000F8
++
++#define ATKBD_SPECIAL 0xFF0000F8
++
+ /*
+ * Scancode to keycode tables. These are just the default setting, and
+ * are loadable via an userland utility.
+ */
+
+-static unsigned char atkbd_set2_keycode[512] = {
++static unsigned int atkbd_set2_keycode[512] = {
+
+ #ifdef CONFIG_KEYBOARD_ATKBD_HP_KEYCODES
+
+@@ -87,11 +100,17 @@ static unsigned char atkbd_set2_keycode[
+ 82, 83, 80, 76, 77, 72, 1, 69, 87, 78, 81, 74, 55, 73, 70, 99,
+
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+- 217,100,255, 0, 97,165, 0, 0,156, 0, 0, 0, 0, 0, 0,125,
++
++ 217,100,ATKBD_KEY_NULL, 0, 97,165, 0, 0,
++ 156, 0, 0, 0, 0, 0, 0,125,
++
+ 173,114, 0,113, 0, 0, 0,126,128, 0, 0,140, 0, 0, 0,127,
+ 159, 0,115, 0,164, 0, 0,116,158, 0,172,166, 0, 0, 0,142,
+ 157, 0, 0, 0, 0, 0, 0, 0,155, 0, 98, 0, 0,163, 0, 0,
+- 226, 0, 0, 0, 0, 0, 0, 0, 0,255, 96, 0, 0, 0,143, 0,
++
++ 226, 0, 0, 0, 0, 0, 0, 0,
++ 0,ATKBD_KEY_NULL, 96, 0, 0, 0,143, 0,
++
+ 0, 0, 0, 0, 0, 0, 0, 0, 0,107, 0,105,102, 0, 0,112,
+ 110,111,108,112,106,103, 0,119, 0,118,109, 0, 99,104,119, 0,
+
+@@ -150,19 +169,6 @@ static unsigned char atkbd_unxlate_table
+ #define ATKBD_RET_HANGEUL 0xf2
+ #define ATKBD_RET_ERR 0xff
+
+-#define ATKBD_KEY_UNKNOWN 0
+-#define ATKBD_KEY_NULL 255
+-
+-#define ATKBD_SCR_1 254
+-#define ATKBD_SCR_2 253
+-#define ATKBD_SCR_4 252
+-#define ATKBD_SCR_8 251
+-#define ATKBD_SCR_CLICK 250
+-#define ATKBD_SCR_LEFT 249
+-#define ATKBD_SCR_RIGHT 248
+-
+-#define ATKBD_SPECIAL 248
+-
+ #define ATKBD_LED_EVENT_BIT 0
+ #define ATKBD_REP_EVENT_BIT 1
+
+@@ -174,7 +180,7 @@ static unsigned char atkbd_unxlate_table
+ #define ATKBD_XL_HANJA 0x20
+
+ static struct {
+- unsigned char keycode;
++ unsigned int keycode;
+ unsigned char set2;
+ } atkbd_scroll_keys[] = {
+ { ATKBD_SCR_1, 0xc5 },
+@@ -200,7 +206,7 @@ struct atkbd {
+ char phys[32];
+
+ unsigned short id;
+- unsigned char keycode[512];
++ unsigned int keycode[512];
+ unsigned char set;
+ unsigned char translated;
+ unsigned char extra;
+@@ -351,7 +357,7 @@ static irqreturn_t atkbd_interrupt(struc
+ unsigned int code = data;
+ int scroll = 0, hscroll = 0, click = -1, add_release_event = 0;
+ int value;
+- unsigned char keycode;
++ unsigned int keycode;
+
+ #ifdef ATKBD_DEBUG
+ printk(KERN_DEBUG "atkbd.c: Received %02x flags %02x\n", data, flags);
+@@ -856,9 +862,11 @@ static void atkbd_set_keycode_table(stru
+ atkbd->keycode[i | 0x80] = atkbd_scroll_keys[j].keycode;
+ }
+ } else if (atkbd->set == 3) {
+- memcpy(atkbd->keycode, atkbd_set3_keycode, sizeof(atkbd->keycode));
++ for (i = 0; i < ARRAY_SIZE(atkbd_set3_keycode); i++)
++ atkbd->keycode[i] = atkbd_set3_keycode[i];
+ } else {
+- memcpy(atkbd->keycode, atkbd_set2_keycode, sizeof(atkbd->keycode));
++ for (i = 0; i < ARRAY_SIZE(atkbd_set2_keycode); i++)
++ atkbd->keycode[i] = atkbd_set2_keycode[i];
+
+ if (atkbd->scroll)
+ for (i = 0; i < ARRAY_SIZE(atkbd_scroll_keys); i++)
+@@ -925,8 +933,8 @@ static void atkbd_set_device_attrs(struc
+ }
+
+ input_dev->keycode = atkbd->keycode;
+- input_dev->keycodesize = sizeof(unsigned char);
+- input_dev->keycodemax = ARRAY_SIZE(atkbd_set2_keycode);
++ input_dev->keycodesize = sizeof(unsigned int);
++ input_dev->keycodemax = ARRAY_SIZE(atkbd->keycode);
+
+ for (i = 0; i < 512; i++)
+ if (atkbd->keycode[i] && atkbd->keycode[i] < ATKBD_SPECIAL)
+@@ -1017,6 +1025,10 @@ static int atkbd_connect(struct serio *s
+ return err;
+ }
+
++#ifdef CONFIG_OLPC
++#include <asm/olpc.h>
++#endif
++
+ /*
+ * atkbd_reconnect() tries to restore keyboard into a sane state and is
+ * most likely called on resume.
+@@ -1027,6 +1039,12 @@ static int atkbd_reconnect(struct serio
+ struct atkbd *atkbd = serio_get_drvdata(serio);
+ struct serio_driver *drv = serio->drv;
+
++#ifdef CONFIG_OLPC
++ if (olpc_rev_after(OLPC_REV_B2))
++ if (serio->dev.power.power_state.event != PM_EVENT_ON)
++ return 0;
++#endif
++
+ if (!atkbd || !drv) {
+ printk(KERN_DEBUG "atkbd: reconnect request, but serio is disconnected, ignoring...\n");
+ return -1;
+Index: linux-2.6.23.17/drivers/input/mouse/Kconfig
+===================================================================
+--- linux-2.6.23.17.orig/drivers/input/mouse/Kconfig
++++ linux-2.6.23.17/drivers/input/mouse/Kconfig
+@@ -96,6 +96,16 @@ config MOUSE_PS2_TOUCHKIT
+
+ If unsure, say N.
+
++config MOUSE_PS2_OLPC
++ bool "OLPC PS/2 mouse protocol extension" if EMBEDDED
++ default n
++ depends on MOUSE_PS2 && OLPC
++ ---help---
++ Say Y here if you have an OLPC PS/2 touchpad connected to
++ your system.
++
++ If unsure, say N.
++
+ config MOUSE_SERIAL
+ tristate "Serial mouse"
+ select SERIO
+Index: linux-2.6.23.17/drivers/input/mouse/Makefile
+===================================================================
+--- linux-2.6.23.17.orig/drivers/input/mouse/Makefile
++++ linux-2.6.23.17/drivers/input/mouse/Makefile
+@@ -24,3 +24,4 @@ psmouse-$(CONFIG_MOUSE_PS2_LOGIPS2PP) +=
+ psmouse-$(CONFIG_MOUSE_PS2_LIFEBOOK) += lifebook.o
+ psmouse-$(CONFIG_MOUSE_PS2_TRACKPOINT) += trackpoint.o
+ psmouse-$(CONFIG_MOUSE_PS2_TOUCHKIT) += touchkit_ps2.o
++psmouse-$(CONFIG_MOUSE_PS2_OLPC) += olpc.o
+Index: linux-2.6.23.17/drivers/input/mouse/psmouse-base.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/input/mouse/psmouse-base.c
++++ linux-2.6.23.17/drivers/input/mouse/psmouse-base.c
+@@ -26,6 +26,7 @@
+ #include "synaptics.h"
+ #include "logips2pp.h"
+ #include "alps.h"
++#include "olpc.h"
+ #include "lifebook.h"
+ #include "trackpoint.h"
+ #include "touchkit_ps2.h"
+@@ -103,7 +104,7 @@ static struct attribute_group psmouse_at
+ */
+ static DEFINE_MUTEX(psmouse_mutex);
+
+-static struct workqueue_struct *kpsmoused_wq;
++struct workqueue_struct *kpsmoused_wq;
+
+ struct psmouse_protocol {
+ enum psmouse_type type;
+@@ -320,7 +321,7 @@ static irqreturn_t psmouse_interrupt(str
+ goto out;
+ }
+
+- if (psmouse->packet[1] == PSMOUSE_RET_ID) {
++ if (psmouse->packet[1] == PSMOUSE_RET_ID || psmouse->packet[1] == PSMOUSE_RET_BAT) {
+ __psmouse_set_state(psmouse, PSMOUSE_IGNORE);
+ serio_reconnect(serio);
+ goto out;
+@@ -631,8 +632,21 @@ static int psmouse_extensions(struct psm
+ }
+ }
+
++/*
++ * Try OLPC touchpad.
++ */
+ if (max_proto > PSMOUSE_IMEX) {
++ if (olpc_detect(psmouse, set_properties) == 0) {
++ if (!set_properties || olpc_init(psmouse) == 0)
++ return PSMOUSE_OLPC;
++/*
++ * Init failed, try basic relative protocols
++ */
++ max_proto = PSMOUSE_IMEX;
++ }
++ }
+
++ if (max_proto > PSMOUSE_IMEX) {
+ if (genius_detect(psmouse, set_properties) == 0)
+ return PSMOUSE_GENPS;
+
+@@ -762,6 +776,14 @@ static const struct psmouse_protocol psm
+ .detect = touchkit_ps2_detect,
+ },
+ #endif
++#ifdef CONFIG_MOUSE_PS2_OLPC
++ {
++ .type = PSMOUSE_OLPC,
++ .name = "OLPC",
++ .alias = "olpc",
++ .detect = olpc_detect,
++ },
++#endif
+ {
+ .type = PSMOUSE_CORTRON,
+ .name = "CortronPS/2",
+Index: linux-2.6.23.17/drivers/input/mouse/psmouse.h
+===================================================================
+--- linux-2.6.23.17.orig/drivers/input/mouse/psmouse.h
++++ linux-2.6.23.17/drivers/input/mouse/psmouse.h
+@@ -89,6 +89,7 @@ enum psmouse_type {
+ PSMOUSE_TRACKPOINT,
+ PSMOUSE_TOUCHKIT_PS2,
+ PSMOUSE_CORTRON,
++ PSMOUSE_OLPC,
+ PSMOUSE_AUTO /* This one should always be last */
+ };
+
+@@ -96,6 +97,7 @@ int psmouse_sliced_command(struct psmous
+ int psmouse_reset(struct psmouse *psmouse);
+ void psmouse_set_resolution(struct psmouse *psmouse, unsigned int resolution);
+
++extern struct workqueue_struct *kpsmoused_wq;
+
+ struct psmouse_attribute {
+ struct device_attribute dattr;
+Index: linux-2.6.23.17/drivers/input/serio/i8042.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/input/serio/i8042.c
++++ linux-2.6.23.17/drivers/input/serio/i8042.c
+@@ -868,6 +868,11 @@ static long i8042_panic_blink(long count
+ #undef DELAY
+
+ #ifdef CONFIG_PM
++
++#ifdef CONFIG_OLPC
++#include <asm/olpc.h>
++#endif
++
+ /*
+ * Here we try to restore the original BIOS settings. We only want to
+ * do that once, when we really suspend, not when we taking memory
+@@ -878,8 +883,15 @@ static long i8042_panic_blink(long count
+ static int i8042_suspend(struct platform_device *dev, pm_message_t state)
+ {
+ if (dev->dev.power.power_state.event != state.event) {
++#ifdef CONFIG_OLPC
++ /* Anything newer than B2 remains powered; no reset needed */
++ if (olpc_rev_before(OLPC_REV_PRE_B3)) {
++#endif
+ if (state.event == PM_EVENT_SUSPEND)
+ i8042_controller_reset();
++#ifdef CONFIG_OLPC
++ }
++#endif
+
+ dev->dev.power.power_state = state;
+ }
+@@ -902,9 +914,15 @@ static int i8042_resume(struct platform_
+ if (dev->dev.power.power_state.event == PM_EVENT_ON)
+ return 0;
+
++#ifdef CONFIG_OLPC
++ if (olpc_rev_before(OLPC_REV_PRE_B3)) {
++#endif
+ error = i8042_controller_check();
+ if (error)
+ return error;
++#ifdef CONFIG_OLPC
++ }
++#endif
+
+ error = i8042_controller_selftest();
+ if (error)
+Index: linux-2.6.23.17/drivers/input/serio/serio.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/input/serio/serio.c
++++ linux-2.6.23.17/drivers/input/serio/serio.c
+@@ -916,11 +916,22 @@ static int serio_uevent(struct device *d
+ #endif /* CONFIG_HOTPLUG */
+
+ #ifdef CONFIG_PM
++
++#ifdef CONFIG_OLPC
++#include <asm/olpc.h>
++#endif
++
+ static int serio_suspend(struct device *dev, pm_message_t state)
+ {
+ if (dev->power.power_state.event != state.event) {
++#ifdef CONFIG_OLPC
++ if (olpc_rev_before(OLPC_REV_PRE_B3)) {
++#endif
+ if (state.event == PM_EVENT_SUSPEND)
+ serio_cleanup(to_serio_port(dev));
++#ifdef CONFIG_OLPC
++ }
++#endif
+
+ dev->power.power_state = state;
+ }
+Index: linux-2.6.23.17/drivers/media/video/cafe_ccic.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/media/video/cafe_ccic.c
++++ linux-2.6.23.17/drivers/media/video/cafe_ccic.c
+@@ -63,13 +63,13 @@ MODULE_SUPPORTED_DEVICE("Video");
+ */
+
+ #define MAX_DMA_BUFS 3
+-static int alloc_bufs_at_load = 0;
+-module_param(alloc_bufs_at_load, bool, 0444);
+-MODULE_PARM_DESC(alloc_bufs_at_load,
+- "Non-zero value causes DMA buffers to be allocated at module "
+- "load time. This increases the chances of successfully getting "
+- "those buffers, but at the cost of nailing down the memory from "
+- "the outset.");
++static int alloc_bufs_at_read = 0;
++module_param(alloc_bufs_at_read, bool, 0444);
++MODULE_PARM_DESC(alloc_bufs_at_read,
++ "Non-zero value causes DMA buffers to be allocated when the "
++ "video capture device is read, rather than at module load "
++ "time. This saves memory, but decreases the chances of "
++ "successfully getting those buffers.");
+
+ static int n_dma_bufs = 3;
+ module_param(n_dma_bufs, uint, 0644);
+@@ -370,6 +370,10 @@ static int cafe_smbus_write_data(struct
+ rval = value | ((command << TWSIC1_ADDR_SHIFT) & TWSIC1_ADDR);
+ cafe_reg_write(cam, REG_TWSIC1, rval);
+ spin_unlock_irqrestore(&cam->dev_lock, flags);
++ mdelay(2); /* It'll probably take about 900µs anyway, and the
++ CAFÉ is apparently quite sensitive to being poked
++ at this point. If we can work out precisely what's
++ going on and reduce this delay, it would be nice. */
+
+ /*
+ * Time to wait for the write to complete. THIS IS A RACY
+@@ -1503,7 +1507,7 @@ static int cafe_v4l_release(struct inode
+ }
+ if (cam->users == 0) {
+ cafe_ctlr_power_down(cam);
+- if (! alloc_bufs_at_load)
++ if (alloc_bufs_at_read)
+ cafe_free_dma_bufs(cam);
+ }
+ mutex_unlock(&cam->s_mutex);
+@@ -2162,7 +2166,7 @@ static int cafe_pci_probe(struct pci_dev
+ /*
+ * If so requested, try to get our DMA buffers now.
+ */
+- if (alloc_bufs_at_load) {
++ if (!alloc_bufs_at_read) {
+ if (cafe_alloc_dma_bufs(cam, 1))
+ cam_warn(cam, "Unable to alloc DMA buffers at load"
+ " will try again later.");
+Index: linux-2.6.23.17/drivers/misc/Kconfig
+===================================================================
+--- linux-2.6.23.17.orig/drivers/misc/Kconfig
++++ linux-2.6.23.17/drivers/misc/Kconfig
+@@ -202,5 +202,10 @@ config THINKPAD_ACPI_BAY
+
+ If you are not sure, say Y here.
+
++config EEPROM_93CX6
++ tristate "EEPROM 93CX6 support"
++ ---help---
++ This is a driver for the EEPROM chipsets 93c46 and 93c66.
++ The driver supports both read as well as write commands.
+
+ endif # MISC_DEVICES
+Index: linux-2.6.23.17/drivers/mmc/host/sdhci.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/mmc/host/sdhci.c
++++ linux-2.6.23.17/drivers/mmc/host/sdhci.c
+@@ -411,6 +411,12 @@ static void sdhci_prepare_data(struct sd
+ break;
+ }
+
++ /*
++ * There's an off-by-one error in the hw that we need to
++ * compensate for.
++ */
++ count++;
++
+ if (count >= 0xF) {
+ printk(KERN_WARNING "%s: Too large timeout requested!\n",
+ mmc_hostname(host->mmc));
+@@ -676,19 +682,17 @@ static void sdhci_set_power(struct sdhci
+ if (!(host->chip->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE))
+ writeb(0, host->ioaddr + SDHCI_POWER_CONTROL);
+
+- pwr = SDHCI_POWER_ON;
+-
+ switch (1 << power) {
+ case MMC_VDD_165_195:
+- pwr |= SDHCI_POWER_180;
++ pwr = SDHCI_POWER_180;
+ break;
+ case MMC_VDD_29_30:
+ case MMC_VDD_30_31:
+- pwr |= SDHCI_POWER_300;
++ pwr = SDHCI_POWER_300;
+ break;
+ case MMC_VDD_32_33:
+ case MMC_VDD_33_34:
+- pwr |= SDHCI_POWER_330;
++ pwr = SDHCI_POWER_330;
+ break;
+ default:
+ BUG();
+@@ -696,6 +700,10 @@ static void sdhci_set_power(struct sdhci
+
+ writeb(pwr, host->ioaddr + SDHCI_POWER_CONTROL);
+
++ pwr |= SDHCI_POWER_ON;
++
++ writeb(pwr, host->ioaddr + SDHCI_POWER_CONTROL);
++
+ out:
+ host->power = power;
+ }
+Index: linux-2.6.23.17/drivers/mtd/Kconfig
+===================================================================
+--- linux-2.6.23.17.orig/drivers/mtd/Kconfig
++++ linux-2.6.23.17/drivers/mtd/Kconfig
+@@ -288,6 +288,14 @@ config SSFDC
+ This enables read only access to SmartMedia formatted NAND
+ flash. You can mount it with FAT file system.
+
++config MTD_OOPS
++ tristate "Log panic/oops to an MTD buffer"
++ depends on MTD
++ help
++ This enables panic and oops messages to be logged to a circular
++ buffer in a flash partition where it can be read back at some
++ later point.
++
+ source "drivers/mtd/chips/Kconfig"
+
+ source "drivers/mtd/maps/Kconfig"
+Index: linux-2.6.23.17/drivers/mtd/Makefile
+===================================================================
+--- linux-2.6.23.17.orig/drivers/mtd/Makefile
++++ linux-2.6.23.17/drivers/mtd/Makefile
+@@ -22,6 +22,7 @@ obj-$(CONFIG_NFTL) += nftl.o
+ obj-$(CONFIG_INFTL) += inftl.o
+ obj-$(CONFIG_RFD_FTL) += rfd_ftl.o
+ obj-$(CONFIG_SSFDC) += ssfdc.o
++obj-$(CONFIG_MTD_OOPS) += mtdoops.o
+
+ nftl-objs := nftlcore.o nftlmount.o
+ inftl-objs := inftlcore.o inftlmount.o
+Index: linux-2.6.23.17/drivers/mtd/chips/cfi_cmdset_0001.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/mtd/chips/cfi_cmdset_0001.c
++++ linux-2.6.23.17/drivers/mtd/chips/cfi_cmdset_0001.c
+@@ -526,7 +526,7 @@ static int cfi_intelext_partition_fixup(
+ struct cfi_pri_intelext *extp = cfi->cmdset_priv;
+
+ /*
+- * Probing of multi-partition flash ships.
++ * Probing of multi-partition flash chips.
+ *
+ * To support multiple partitions when available, we simply arrange
+ * for each of them to have their own flchip structure even if they
+@@ -1781,7 +1781,7 @@ static int __xipram do_erase_oneblock(st
+ return ret;
+ }
+
+-int cfi_intelext_erase_varsize(struct mtd_info *mtd, struct erase_info *instr)
++static int cfi_intelext_erase_varsize(struct mtd_info *mtd, struct erase_info *instr)
+ {
+ unsigned long ofs, len;
+ int ret;
+@@ -1931,7 +1931,7 @@ static int cfi_intelext_lock(struct mtd_
+ printk(KERN_DEBUG "%s: lock status before, ofs=0x%08llx, len=0x%08X\n",
+ __FUNCTION__, ofs, len);
+ cfi_varsize_frob(mtd, do_printlockstatus_oneblock,
+- ofs, len, 0);
++ ofs, len, NULL);
+ #endif
+
+ ret = cfi_varsize_frob(mtd, do_xxlock_oneblock,
+@@ -1941,7 +1941,7 @@ static int cfi_intelext_lock(struct mtd_
+ printk(KERN_DEBUG "%s: lock status after, ret=%d\n",
+ __FUNCTION__, ret);
+ cfi_varsize_frob(mtd, do_printlockstatus_oneblock,
+- ofs, len, 0);
++ ofs, len, NULL);
+ #endif
+
+ return ret;
+@@ -1955,7 +1955,7 @@ static int cfi_intelext_unlock(struct mt
+ printk(KERN_DEBUG "%s: lock status before, ofs=0x%08llx, len=0x%08X\n",
+ __FUNCTION__, ofs, len);
+ cfi_varsize_frob(mtd, do_printlockstatus_oneblock,
+- ofs, len, 0);
++ ofs, len, NULL);
+ #endif
+
+ ret = cfi_varsize_frob(mtd, do_xxlock_oneblock,
+@@ -1965,7 +1965,7 @@ static int cfi_intelext_unlock(struct mt
+ printk(KERN_DEBUG "%s: lock status after, ret=%d\n",
+ __FUNCTION__, ret);
+ cfi_varsize_frob(mtd, do_printlockstatus_oneblock,
+- ofs, len, 0);
++ ofs, len, NULL);
+ #endif
+
+ return ret;
+@@ -2256,7 +2256,7 @@ static void cfi_intelext_save_locks(stru
+ adr = region->offset + block * len;
+
+ status = cfi_varsize_frob(mtd,
+- do_getlockstatus_oneblock, adr, len, 0);
++ do_getlockstatus_oneblock, adr, len, NULL);
+ if (status)
+ set_bit(block, region->lockmap);
+ else
+Index: linux-2.6.23.17/drivers/mtd/chips/cfi_cmdset_0002.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/mtd/chips/cfi_cmdset_0002.c
++++ linux-2.6.23.17/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -1617,7 +1617,7 @@ static int __xipram do_erase_oneblock(st
+ }
+
+
+-int cfi_amdstd_erase_varsize(struct mtd_info *mtd, struct erase_info *instr)
++static int cfi_amdstd_erase_varsize(struct mtd_info *mtd, struct erase_info *instr)
+ {
+ unsigned long ofs, len;
+ int ret;
+Index: linux-2.6.23.17/drivers/mtd/chips/jedec_probe.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/mtd/chips/jedec_probe.c
++++ linux-2.6.23.17/drivers/mtd/chips/jedec_probe.c
+@@ -70,6 +70,7 @@
+
+ /* Fujitsu */
+ #define MBM29F040C 0x00A4
++#define MBM29F800BA 0x2258
+ #define MBM29LV650UE 0x22D7
+ #define MBM29LV320TE 0x22F6
+ #define MBM29LV320BE 0x22F9
+@@ -129,6 +130,7 @@
+ #define LH28F640BF 0x00b0
+
+ /* ST - www.st.com */
++#define M29F800AB 0x0058
+ #define M29W800DT 0x00D7
+ #define M29W800DB 0x005B
+ #define M29W160DT 0x22C4
+@@ -646,6 +648,23 @@ static const struct amd_flash_info jedec
+ }
+ }, {
+ .mfr_id = MANUFACTURER_FUJITSU,
++ .dev_id = MBM29F800BA,
++ .name = "Fujitsu MBM29F800BA",
++ .uaddr = {
++ [0] = MTD_UADDR_0x0AAA_0x0555, /* x8 */
++ [1] = MTD_UADDR_0x0555_0x02AA, /* x16 */
++ },
++ .DevSize = SIZE_1MiB,
++ .CmdSet = P_ID_AMD_STD,
++ .NumEraseRegions= 4,
++ .regions = {
++ ERASEINFO(0x04000,1),
++ ERASEINFO(0x02000,2),
++ ERASEINFO(0x08000,1),
++ ERASEINFO(0x10000,15),
++ }
++ }, {
++ .mfr_id = MANUFACTURER_FUJITSU,
+ .dev_id = MBM29LV650UE,
+ .name = "Fujitsu MBM29LV650UE",
+ .uaddr = {
+@@ -1510,6 +1529,23 @@ static const struct amd_flash_info jedec
+ ERASEINFO(0x1000,256)
+ }
+
++ }, {
++ .mfr_id = MANUFACTURER_ST,
++ .dev_id = M29F800AB,
++ .name = "ST M29F800AB",
++ .uaddr = {
++ [0] = MTD_UADDR_0x0AAA_0x0555, /* x8 */
++ [1] = MTD_UADDR_0x0555_0x02AA, /* x16 */
++ },
++ .DevSize = SIZE_1MiB,
++ .CmdSet = P_ID_AMD_STD,
++ .NumEraseRegions= 4,
++ .regions = {
++ ERASEINFO(0x04000,1),
++ ERASEINFO(0x02000,2),
++ ERASEINFO(0x08000,1),
++ ERASEINFO(0x10000,15),
++ }
+ }, {
+ .mfr_id = MANUFACTURER_ST, /* FIXME - CFI device? */
+ .dev_id = M29W800DT,
+Index: linux-2.6.23.17/drivers/mtd/devices/Kconfig
+===================================================================
+--- linux-2.6.23.17.orig/drivers/mtd/devices/Kconfig
++++ linux-2.6.23.17/drivers/mtd/devices/Kconfig
+@@ -69,12 +69,21 @@ config MTD_DATAFLASH26
+ If you have such a board and such a DataFlash, say 'Y'.
+
+ config MTD_M25P80
+- tristate "Support for M25 SPI Flash"
++ tristate "Support most SPI Flash chips (AT26DF, M25P, W25X, ...)"
+ depends on SPI_MASTER && EXPERIMENTAL
+ help
+- This enables access to ST M25P80 and similar SPI flash chips,
+- used for program and data storage. Set up your spi devices
+- with the right board-specific platform data.
++ This enables access to most modern SPI flash chips, used for
++ program and data storage. Series supported include Atmel AT26DF,
++ Spansion S25SL, SST 25VF, ST M25P, and Winbond W25X. Other chips
++ are supported as well. See the driver source for the current list,
++ or to add other chips.
++
++ Note that the original DataFlash chips (AT45 series, not AT26DF),
++ need an entirely different driver.
++
++ Set up your spi devices with the right board-specific platform data,
++ if you want to specify device partitioning or to use a device which
++ doesn't support the JEDEC ID instruction.
+
+ config MTD_SLRAM
+ tristate "Uncached system RAM"
+Index: linux-2.6.23.17/drivers/mtd/devices/m25p80.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/mtd/devices/m25p80.c
++++ linux-2.6.23.17/drivers/mtd/devices/m25p80.c
+@@ -1,5 +1,5 @@
+ /*
+- * MTD SPI driver for ST M25Pxx flash chips
++ * MTD SPI driver for ST M25Pxx (and similar) serial flash chips
+ *
+ * Author: Mike Lavender, mike@steroidmicros.com
+ *
+@@ -19,33 +19,32 @@
+ #include <linux/module.h>
+ #include <linux/device.h>
+ #include <linux/interrupt.h>
+-#include <linux/interrupt.h>
++#include <linux/mutex.h>
++
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/partitions.h>
++
+ #include <linux/spi/spi.h>
+ #include <linux/spi/flash.h>
+
+-#include <asm/semaphore.h>
+-
+-
+-/* NOTE: AT 25F and SST 25LF series are very similar,
+- * but commands for sector erase and chip id differ...
+- */
+
+ #define FLASH_PAGESIZE 256
+
+ /* Flash opcodes. */
+-#define OPCODE_WREN 6 /* Write enable */
+-#define OPCODE_RDSR 5 /* Read status register */
+-#define OPCODE_READ 3 /* Read data bytes */
+-#define OPCODE_PP 2 /* Page program */
+-#define OPCODE_SE 0xd8 /* Sector erase */
+-#define OPCODE_RES 0xab /* Read Electronic Signature */
++#define OPCODE_WREN 0x06 /* Write enable */
++#define OPCODE_RDSR 0x05 /* Read status register */
++#define OPCODE_READ 0x03 /* Read data bytes (low frequency) */
++#define OPCODE_FAST_READ 0x0b /* Read data bytes (high frequency) */
++#define OPCODE_PP 0x02 /* Page program (up to 256 bytes) */
++#define OPCODE_BE_4K 0x20 /* Erase 4KiB block */
++#define OPCODE_BE_32K 0x52 /* Erase 32KiB block */
++#define OPCODE_SE 0xd8 /* Sector erase (usually 64KiB) */
+ #define OPCODE_RDID 0x9f /* Read JEDEC ID */
+
+ /* Status Register bits. */
+ #define SR_WIP 1 /* Write in progress */
+ #define SR_WEL 2 /* Write enable latch */
++/* meaning of other SR_* bits may differ between vendors */
+ #define SR_BP0 4 /* Block protect 0 */
+ #define SR_BP1 8 /* Block protect 1 */
+ #define SR_BP2 0x10 /* Block protect 2 */
+@@ -65,9 +64,10 @@
+
+ struct m25p {
+ struct spi_device *spi;
+- struct semaphore lock;
++ struct mutex lock;
+ struct mtd_info mtd;
+- unsigned partitioned;
++ unsigned partitioned:1;
++ u8 erase_opcode;
+ u8 command[4];
+ };
+
+@@ -150,8 +150,9 @@ static int wait_till_ready(struct m25p *
+ */
+ static int erase_sector(struct m25p *flash, u32 offset)
+ {
+- DEBUG(MTD_DEBUG_LEVEL3, "%s: %s at 0x%08x\n", flash->spi->dev.bus_id,
+- __FUNCTION__, offset);
++ DEBUG(MTD_DEBUG_LEVEL3, "%s: %s %dKiB at 0x%08x\n",
++ flash->spi->dev.bus_id, __FUNCTION__,
++ flash->mtd.erasesize / 1024, offset);
+
+ /* Wait until finished previous write command. */
+ if (wait_till_ready(flash))
+@@ -161,7 +162,7 @@ static int erase_sector(struct m25p *fla
+ write_enable(flash);
+
+ /* Set up command buffer. */
+- flash->command[0] = OPCODE_SE;
++ flash->command[0] = flash->erase_opcode;
+ flash->command[1] = offset >> 16;
+ flash->command[2] = offset >> 8;
+ flash->command[3] = offset;
+@@ -201,13 +202,17 @@ static int m25p80_erase(struct mtd_info
+ addr = instr->addr;
+ len = instr->len;
+
+- down(&flash->lock);
++ mutex_lock(&flash->lock);
++
++ /* REVISIT in some cases we could speed up erasing large regions
++ * by using OPCODE_SE instead of OPCODE_BE_4K
++ */
+
+ /* now erase those sectors */
+ while (len) {
+ if (erase_sector(flash, addr)) {
+ instr->state = MTD_ERASE_FAILED;
+- up(&flash->lock);
++ mutex_unlock(&flash->lock);
+ return -EIO;
+ }
+
+@@ -215,7 +220,7 @@ static int m25p80_erase(struct mtd_info
+ len -= mtd->erasesize;
+ }
+
+- up(&flash->lock);
++ mutex_unlock(&flash->lock);
+
+ instr->state = MTD_ERASE_DONE;
+ mtd_erase_callback(instr);
+@@ -260,16 +265,19 @@ static int m25p80_read(struct mtd_info *
+ if (retlen)
+ *retlen = 0;
+
+- down(&flash->lock);
++ mutex_lock(&flash->lock);
+
+ /* Wait till previous write/erase is done. */
+ if (wait_till_ready(flash)) {
+ /* REVISIT status return?? */
+- up(&flash->lock);
++ mutex_unlock(&flash->lock);
+ return 1;
+ }
+
+- /* NOTE: OPCODE_FAST_READ (if available) is faster... */
++ /* FIXME switch to OPCODE_FAST_READ. It's required for higher
++ * clocks; and at this writing, every chip this driver handles
++ * supports that opcode.
++ */
+
+ /* Set up the write data buffer. */
+ flash->command[0] = OPCODE_READ;
+@@ -281,7 +289,7 @@ static int m25p80_read(struct mtd_info *
+
+ *retlen = m.actual_length - sizeof(flash->command);
+
+- up(&flash->lock);
++ mutex_unlock(&flash->lock);
+
+ return 0;
+ }
+@@ -323,7 +331,7 @@ static int m25p80_write(struct mtd_info
+ t[1].tx_buf = buf;
+ spi_message_add_tail(&t[1], &m);
+
+- down(&flash->lock);
++ mutex_lock(&flash->lock);
+
+ /* Wait until finished previous write command. */
+ if (wait_till_ready(flash))
+@@ -381,10 +389,10 @@ static int m25p80_write(struct mtd_info
+ if (retlen)
+ *retlen += m.actual_length
+ - sizeof(flash->command);
+- }
+- }
++ }
++ }
+
+- up(&flash->lock);
++ mutex_unlock(&flash->lock);
+
+ return 0;
+ }
+@@ -398,24 +406,118 @@ static int m25p80_write(struct mtd_info
+
+ struct flash_info {
+ char *name;
+- u8 id;
+- u16 jedec_id;
++
++ /* JEDEC id zero means "no ID" (most older chips); otherwise it has
++ * a high byte of zero plus three data bytes: the manufacturer id,
++ * then a two byte device id.
++ */
++ u32 jedec_id;
++
++ /* The size listed here is what works with OPCODE_SE, which isn't
++ * necessarily called a "sector" by the vendor.
++ */
+ unsigned sector_size;
+- unsigned n_sectors;
++ u16 n_sectors;
++
++ u16 flags;
++#define SECT_4K 0x01 /* OPCODE_BE_4K works uniformly */
+ };
+
++
++/* NOTE: double check command sets and memory organization when you add
++ * more flash chips. This current list focusses on newer chips, which
++ * have been converging on command sets which including JEDEC ID.
++ */
+ static struct flash_info __devinitdata m25p_data [] = {
+- /* REVISIT: fill in JEDEC ids, for parts that have them */
+- { "m25p05", 0x05, 0x2010, 32 * 1024, 2 },
+- { "m25p10", 0x10, 0x2011, 32 * 1024, 4 },
+- { "m25p20", 0x11, 0x2012, 64 * 1024, 4 },
+- { "m25p40", 0x12, 0x2013, 64 * 1024, 8 },
+- { "m25p80", 0x13, 0x0000, 64 * 1024, 16 },
+- { "m25p16", 0x14, 0x2015, 64 * 1024, 32 },
+- { "m25p32", 0x15, 0x2016, 64 * 1024, 64 },
+- { "m25p64", 0x16, 0x2017, 64 * 1024, 128 },
++
++ /* Atmel -- some are (confusingly) marketed as "DataFlash" */
++ { "at25fs010", 0x1f6601, 32 * 1024, 4, SECT_4K, },
++ { "at25fs040", 0x1f6604, 64 * 1024, 8, SECT_4K, },
++
++ { "at25df041a", 0x1f4401, 64 * 1024, 8, SECT_4K, },
++
++ { "at26f004", 0x1f0400, 64 * 1024, 8, SECT_4K, },
++ { "at26df081a", 0x1f4501, 64 * 1024, 16, SECT_4K, },
++ { "at26df161a", 0x1f4601, 64 * 1024, 32, SECT_4K, },
++ { "at26df321", 0x1f4701, 64 * 1024, 64, SECT_4K, },
++
++ /* Spansion -- single (large) sector size only, at least
++ * for the chips listed here (without boot sectors).
++ */
++ { "s25sl004a", 0x010212, 64 * 1024, 8, },
++ { "s25sl008a", 0x010213, 64 * 1024, 16, },
++ { "s25sl016a", 0x010214, 64 * 1024, 32, },
++ { "s25sl032a", 0x010215, 64 * 1024, 64, },
++ { "s25sl064a", 0x010216, 64 * 1024, 128, },
++
++ /* SST -- large erase sizes are "overlays", "sectors" are 4K */
++ { "sst25vf040b", 0xbf258d, 64 * 1024, 8, SECT_4K, },
++ { "sst25vf080b", 0xbf258e, 64 * 1024, 16, SECT_4K, },
++ { "sst25vf016b", 0xbf2541, 64 * 1024, 32, SECT_4K, },
++ { "sst25vf032b", 0xbf254a, 64 * 1024, 64, SECT_4K, },
++
++ /* ST Microelectronics -- newer production may have feature updates */
++ { "m25p05", 0x202010, 32 * 1024, 2, },
++ { "m25p10", 0x202011, 32 * 1024, 4, },
++ { "m25p20", 0x202012, 64 * 1024, 4, },
++ { "m25p40", 0x202013, 64 * 1024, 8, },
++ { "m25p80", 0, 64 * 1024, 16, },
++ { "m25p16", 0x202015, 64 * 1024, 32, },
++ { "m25p32", 0x202016, 64 * 1024, 64, },
++ { "m25p64", 0x202017, 64 * 1024, 128, },
++ { "m25p128", 0x202018, 256 * 1024, 64, },
++
++ { "m45pe80", 0x204014, 64 * 1024, 16, },
++ { "m45pe16", 0x204015, 64 * 1024, 32, },
++
++ { "m25pe80", 0x208014, 64 * 1024, 16, },
++ { "m25pe16", 0x208015, 64 * 1024, 32, SECT_4K, },
++
++ /* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */
++ { "w25x10", 0xef3011, 64 * 1024, 2, SECT_4K, },
++ { "w25x20", 0xef3012, 64 * 1024, 4, SECT_4K, },
++ { "w25x40", 0xef3013, 64 * 1024, 8, SECT_4K, },
++ { "w25x80", 0xef3014, 64 * 1024, 16, SECT_4K, },
++ { "w25x16", 0xef3015, 64 * 1024, 32, SECT_4K, },
++ { "w25x32", 0xef3016, 64 * 1024, 64, SECT_4K, },
++ { "w25x64", 0xef3017, 64 * 1024, 128, SECT_4K, },
+ };
+
++static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
++{
++ int tmp;
++ u8 code = OPCODE_RDID;
++ u8 id[3];
++ u32 jedec;
++ struct flash_info *info;
++
++ /* JEDEC also defines an optional "extended device information"
++ * string for after vendor-specific data, after the three bytes
++ * we use here. Supporting some chips might require using it.
++ */
++ tmp = spi_write_then_read(spi, &code, 1, id, 3);
++ if (tmp < 0) {
++ DEBUG(MTD_DEBUG_LEVEL0, "%s: error %d reading JEDEC ID\n",
++ spi->dev.bus_id, tmp);
++ return NULL;
++ }
++ jedec = id[0];
++ jedec = jedec << 8;
++ jedec |= id[1];
++ jedec = jedec << 8;
++ jedec |= id[2];
++
++ for (tmp = 0, info = m25p_data;
++ tmp < ARRAY_SIZE(m25p_data);
++ tmp++, info++) {
++ if (info->jedec_id == jedec)
++ return info;
++ }
++ dev_err(&spi->dev, "unrecognized JEDEC id %06x\n", jedec);
++ return NULL;
++}
++
++
+ /*
+ * board specific setup should have ensured the SPI clock used here
+ * matches what the READ command supports, at least until this driver
+@@ -429,37 +531,51 @@ static int __devinit m25p_probe(struct s
+ unsigned i;
+
+ /* Platform data helps sort out which chip type we have, as
+- * well as how this board partitions it.
++ * well as how this board partitions it. If we don't have
++ * a chip ID, try the JEDEC id commands; they'll work for most
++ * newer chips, even if we don't recognize the particular chip.
+ */
+ data = spi->dev.platform_data;
+- if (!data || !data->type) {
+- /* FIXME some chips can identify themselves with RES
+- * or JEDEC get-id commands. Try them ...
+- */
+- DEBUG(MTD_DEBUG_LEVEL1, "%s: no chip id\n",
+- spi->dev.bus_id);
+- return -ENODEV;
+- }
++ if (data && data->type) {
++ for (i = 0, info = m25p_data;
++ i < ARRAY_SIZE(m25p_data);
++ i++, info++) {
++ if (strcmp(data->type, info->name) == 0)
++ break;
++ }
+
+- for (i = 0, info = m25p_data; i < ARRAY_SIZE(m25p_data); i++, info++) {
+- if (strcmp(data->type, info->name) == 0)
+- break;
+- }
+- if (i == ARRAY_SIZE(m25p_data)) {
+- DEBUG(MTD_DEBUG_LEVEL1, "%s: unrecognized id %s\n",
+- spi->dev.bus_id, data->type);
++ /* unrecognized chip? */
++ if (i == ARRAY_SIZE(m25p_data)) {
++ DEBUG(MTD_DEBUG_LEVEL0, "%s: unrecognized id %s\n",
++ spi->dev.bus_id, data->type);
++ info = NULL;
++
++ /* recognized; is that chip really what's there? */
++ } else if (info->jedec_id) {
++ struct flash_info *chip = jedec_probe(spi);
++
++ if (!chip || chip != info) {
++ dev_warn(&spi->dev, "found %s, expected %s\n",
++ chip ? chip->name : "UNKNOWN",
++ info->name);
++ info = NULL;
++ }
++ }
++ } else
++ info = jedec_probe(spi);
++
++ if (!info)
+ return -ENODEV;
+- }
+
+ flash = kzalloc(sizeof *flash, GFP_KERNEL);
+ if (!flash)
+ return -ENOMEM;
+
+ flash->spi = spi;
+- init_MUTEX(&flash->lock);
++ mutex_init(&flash->lock);
+ dev_set_drvdata(&spi->dev, flash);
+
+- if (data->name)
++ if (data && data->name)
+ flash->mtd.name = data->name;
+ else
+ flash->mtd.name = spi->dev.bus_id;
+@@ -468,17 +584,25 @@ static int __devinit m25p_probe(struct s
+ flash->mtd.writesize = 1;
+ flash->mtd.flags = MTD_CAP_NORFLASH;
+ flash->mtd.size = info->sector_size * info->n_sectors;
+- flash->mtd.erasesize = info->sector_size;
+ flash->mtd.erase = m25p80_erase;
+ flash->mtd.read = m25p80_read;
+ flash->mtd.write = m25p80_write;
+
++ /* prefer "small sector" erase if possible */
++ if (info->flags & SECT_4K) {
++ flash->erase_opcode = OPCODE_BE_4K;
++ flash->mtd.erasesize = 4096;
++ } else {
++ flash->erase_opcode = OPCODE_SE;
++ flash->mtd.erasesize = info->sector_size;
++ }
++
+ dev_info(&spi->dev, "%s (%d Kbytes)\n", info->name,
+ flash->mtd.size / 1024);
+
+ DEBUG(MTD_DEBUG_LEVEL2,
+- "mtd .name = %s, .size = 0x%.8x (%uM) "
+- ".erasesize = 0x%.8x (%uK) .numeraseregions = %d\n",
++ "mtd .name = %s, .size = 0x%.8x (%uMiB) "
++ ".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n",
+ flash->mtd.name,
+ flash->mtd.size, flash->mtd.size / (1024*1024),
+ flash->mtd.erasesize, flash->mtd.erasesize / 1024,
+@@ -488,7 +612,7 @@ static int __devinit m25p_probe(struct s
+ for (i = 0; i < flash->mtd.numeraseregions; i++)
+ DEBUG(MTD_DEBUG_LEVEL2,
+ "mtd.eraseregions[%d] = { .offset = 0x%.8x, "
+- ".erasesize = 0x%.8x (%uK), "
++ ".erasesize = 0x%.8x (%uKiB), "
+ ".numblocks = %d }\n",
+ i, flash->mtd.eraseregions[i].offset,
+ flash->mtd.eraseregions[i].erasesize,
+@@ -516,14 +640,14 @@ static int __devinit m25p_probe(struct s
+ }
+
+ if (nr_parts > 0) {
+- for (i = 0; i < data->nr_parts; i++) {
++ for (i = 0; i < nr_parts; i++) {
+ DEBUG(MTD_DEBUG_LEVEL2, "partitions[%d] = "
+ "{.name = %s, .offset = 0x%.8x, "
+- ".size = 0x%.8x (%uK) }\n",
+- i, data->parts[i].name,
+- data->parts[i].offset,
+- data->parts[i].size,
+- data->parts[i].size / 1024);
++ ".size = 0x%.8x (%uKiB) }\n",
++ i, parts[i].name,
++ parts[i].offset,
++ parts[i].size,
++ parts[i].size / 1024);
+ }
+ flash->partitioned = 1;
+ return add_mtd_partitions(&flash->mtd, parts, nr_parts);
+@@ -560,6 +684,11 @@ static struct spi_driver m25p80_driver =
+ },
+ .probe = m25p_probe,
+ .remove = __devexit_p(m25p_remove),
++
++ /* REVISIT: many of these chips have deep power-down modes, which
++ * should clearly be entered on suspend() to minimize power use.
++ * And also when they're otherwise idle...
++ */
+ };
+
+
+Index: linux-2.6.23.17/drivers/mtd/devices/mtd_dataflash.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/mtd/devices/mtd_dataflash.c
++++ linux-2.6.23.17/drivers/mtd/devices/mtd_dataflash.c
+@@ -14,6 +14,7 @@
+ #include <linux/slab.h>
+ #include <linux/delay.h>
+ #include <linux/device.h>
++#include <linux/mutex.h>
+ #include <linux/spi/spi.h>
+ #include <linux/spi/flash.h>
+
+@@ -89,7 +90,7 @@ struct dataflash {
+ unsigned short page_offset; /* offset in flash address */
+ unsigned int page_size; /* of bytes per page */
+
+- struct semaphore lock;
++ struct mutex lock;
+ struct spi_device *spi;
+
+ struct mtd_info mtd;
+@@ -167,7 +168,7 @@ static int dataflash_erase(struct mtd_in
+ x.len = 4;
+ spi_message_add_tail(&x, &msg);
+
+- down(&priv->lock);
++ mutex_lock(&priv->lock);
+ while (instr->len > 0) {
+ unsigned int pageaddr;
+ int status;
+@@ -210,7 +211,7 @@ static int dataflash_erase(struct mtd_in
+ instr->len -= priv->page_size;
+ }
+ }
+- up(&priv->lock);
++ mutex_unlock(&priv->lock);
+
+ /* Inform MTD subsystem that erase is complete */
+ instr->state = MTD_ERASE_DONE;
+@@ -266,7 +267,7 @@ static int dataflash_read(struct mtd_inf
+ x[1].len = len;
+ spi_message_add_tail(&x[1], &msg);
+
+- down(&priv->lock);
++ mutex_lock(&priv->lock);
+
+ /* Continuous read, max clock = f(car) which may be less than
+ * the peak rate available. Some chips support commands with
+@@ -279,7 +280,7 @@ static int dataflash_read(struct mtd_inf
+ /* plus 4 "don't care" bytes */
+
+ status = spi_sync(priv->spi, &msg);
+- up(&priv->lock);
++ mutex_unlock(&priv->lock);
+
+ if (status >= 0) {
+ *retlen = msg.actual_length - 8;
+@@ -336,7 +337,7 @@ static int dataflash_write(struct mtd_in
+ else
+ writelen = len;
+
+- down(&priv->lock);
++ mutex_lock(&priv->lock);
+ while (remaining > 0) {
+ DEBUG(MTD_DEBUG_LEVEL3, "write @ %i:%i len=%i\n",
+ pageaddr, offset, writelen);
+@@ -441,7 +442,7 @@ static int dataflash_write(struct mtd_in
+ else
+ writelen = remaining;
+ }
+- up(&priv->lock);
++ mutex_unlock(&priv->lock);
+
+ return status;
+ }
+@@ -463,7 +464,7 @@ add_dataflash(struct spi_device *spi, ch
+ if (!priv)
+ return -ENOMEM;
+
+- init_MUTEX(&priv->lock);
++ mutex_init(&priv->lock);
+ priv->spi = spi;
+ priv->page_size = pagesize;
+ priv->page_offset = pageoffset;
+Index: linux-2.6.23.17/drivers/mtd/devices/pmc551.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/mtd/devices/pmc551.c
++++ linux-2.6.23.17/drivers/mtd/devices/pmc551.c
+@@ -30,8 +30,8 @@
+ *
+ * Notes:
+ * Due to what I assume is more buggy SROM, the 64M PMC551 I
+- * have available claims that all 4 of it's DRAM banks have 64M
+- * of ram configured (making a grand total of 256M onboard).
++ * have available claims that all 4 of its DRAM banks have 64MiB
++ * of ram configured (making a grand total of 256MiB onboard).
+ * This is slightly annoying since the BAR0 size reflects the
+ * aperture size, not the dram size, and the V370PDC supplies no
+ * other method for memory size discovery. This problem is
+@@ -70,7 +70,7 @@
+ * made the memory unusable, added a fix to code to touch up
+ * the DRAM some.
+ *
+- * Bugs/FIXME's:
++ * Bugs/FIXMEs:
+ * * MUST fix the init function to not spin on a register
+ * waiting for it to set .. this does not safely handle busted
+ * devices that never reset the register correctly which will
+@@ -562,10 +562,10 @@ static u32 fixup_pmc551(struct pci_dev *
+ /*
+ * Some screen fun
+ */
+- printk(KERN_DEBUG "pmc551: %d%c (0x%x) of %sprefetchable memory at "
++ printk(KERN_DEBUG "pmc551: %d%sB (0x%x) of %sprefetchable memory at "
+ "0x%llx\n", (size < 1024) ? size : (size < 1048576) ?
+ size >> 10 : size >> 20,
+- (size < 1024) ? 'B' : (size < 1048576) ? 'K' : 'M', size,
++ (size < 1024) ? "" : (size < 1048576) ? "Ki" : "Mi", size,
+ ((dcmd & (0x1 << 3)) == 0) ? "non-" : "",
+ (unsigned long long)pci_resource_start(dev, 0));
+
+@@ -649,14 +649,10 @@ MODULE_DESCRIPTION(PMC551_VERSION);
+ * Stuff these outside the ifdef so as to not bust compiled in driver support
+ */
+ static int msize = 0;
+-#if defined(CONFIG_MTD_PMC551_APERTURE_SIZE)
+-static int asize = CONFIG_MTD_PMC551_APERTURE_SIZE;
+-#else
+ static int asize = 0;
+-#endif
+
+ module_param(msize, int, 0);
+-MODULE_PARM_DESC(msize, "memory size in Megabytes [1 - 1024]");
++MODULE_PARM_DESC(msize, "memory size in MiB [1 - 1024]");
+ module_param(asize, int, 0);
+ MODULE_PARM_DESC(asize, "aperture size, must be <= memsize [1-1024]");
+
+@@ -799,8 +795,7 @@ static int __init init_pmc551(void)
+ mtd->owner = THIS_MODULE;
+
+ if (add_mtd_device(mtd)) {
+- printk(KERN_NOTICE "pmc551: Failed to register new "
+- "device\n");
++ printk(KERN_NOTICE "pmc551: Failed to register new device\n");
+ pci_iounmap(PCI_Device, priv->start);
+ kfree(mtd->priv);
+ kfree(mtd);
+@@ -811,13 +806,13 @@ static int __init init_pmc551(void)
+ pci_dev_get(PCI_Device);
+
+ printk(KERN_NOTICE "Registered pmc551 memory device.\n");
+- printk(KERN_NOTICE "Mapped %dM of memory from 0x%p to 0x%p\n",
++ printk(KERN_NOTICE "Mapped %dMiB of memory from 0x%p to 0x%p\n",
+ priv->asize >> 20,
+ priv->start, priv->start + priv->asize);
+- printk(KERN_NOTICE "Total memory is %d%c\n",
++ printk(KERN_NOTICE "Total memory is %d%sB\n",
+ (length < 1024) ? length :
+ (length < 1048576) ? length >> 10 : length >> 20,
+- (length < 1024) ? 'B' : (length < 1048576) ? 'K' : 'M');
++ (length < 1024) ? "" : (length < 1048576) ? "Ki" : "Mi");
+ priv->nextpmc551 = pmc551list;
+ pmc551list = mtd;
+ found++;
+@@ -850,7 +845,7 @@ static void __exit cleanup_pmc551(void)
+ pmc551list = priv->nextpmc551;
+
+ if (priv->start) {
+- printk(KERN_DEBUG "pmc551: unmapping %dM starting at "
++ printk(KERN_DEBUG "pmc551: unmapping %dMiB starting at "
+ "0x%p\n", priv->asize >> 20, priv->start);
+ pci_iounmap(priv->dev, priv->start);
+ }
+Index: linux-2.6.23.17/drivers/mtd/maps/nettel.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/mtd/maps/nettel.c
++++ linux-2.6.23.17/drivers/mtd/maps/nettel.c
+@@ -158,68 +158,11 @@ static struct notifier_block nettel_noti
+ nettel_reboot_notifier, NULL, 0
+ };
+
+-/*
+- * Erase the configuration file system.
+- * Used to support the software reset button.
+- */
+-static void nettel_erasecallback(struct erase_info *done)
+-{
+- wait_queue_head_t *wait_q = (wait_queue_head_t *)done->priv;
+- wake_up(wait_q);
+-}
+-
+-static struct erase_info nettel_erase;
+-
+-int nettel_eraseconfig(void)
+-{
+- struct mtd_info *mtd;
+- DECLARE_WAITQUEUE(wait, current);
+- wait_queue_head_t wait_q;
+- int ret;
+-
+- init_waitqueue_head(&wait_q);
+- mtd = get_mtd_device(NULL, 2);
+- if (!IS_ERR(mtd)) {
+- nettel_erase.mtd = mtd;
+- nettel_erase.callback = nettel_erasecallback;
+- nettel_erase.callback = NULL;
+- nettel_erase.addr = 0;
+- nettel_erase.len = mtd->size;
+- nettel_erase.priv = (u_long) &wait_q;
+- nettel_erase.priv = 0;
+-
+- set_current_state(TASK_INTERRUPTIBLE);
+- add_wait_queue(&wait_q, &wait);
+-
+- ret = mtd->erase(mtd, &nettel_erase);
+- if (ret) {
+- set_current_state(TASK_RUNNING);
+- remove_wait_queue(&wait_q, &wait);
+- put_mtd_device(mtd);
+- return(ret);
+- }
+-
+- schedule(); /* Wait for erase to finish. */
+- remove_wait_queue(&wait_q, &wait);
+-
+- put_mtd_device(mtd);
+- }
+-
+- return(0);
+-}
+-
+-#else
+-
+-int nettel_eraseconfig(void)
+-{
+- return(0);
+-}
+-
+ #endif
+
+ /****************************************************************************/
+
+-int __init nettel_init(void)
++static int __init nettel_init(void)
+ {
+ volatile unsigned long *amdpar;
+ unsigned long amdaddr, maxsize;
+@@ -421,10 +364,6 @@ int __init nettel_init(void)
+
+ intel_mtd->owner = THIS_MODULE;
+
+-#ifndef CONFIG_BLK_DEV_INITRD
+- ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, 1);
+-#endif
+-
+ num_intel_partitions = sizeof(nettel_intel_partitions) /
+ sizeof(nettel_intel_partitions[0]);
+
+@@ -477,7 +416,7 @@ out_unmap2:
+
+ /****************************************************************************/
+
+-void __exit nettel_cleanup(void)
++static void __exit nettel_cleanup(void)
+ {
+ #ifdef CONFIG_MTD_CFI_INTELEXT
+ unregister_reboot_notifier(&nettel_notifier_block);
+Index: linux-2.6.23.17/drivers/mtd/maps/pmcmsp-ramroot.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/mtd/maps/pmcmsp-ramroot.c
++++ linux-2.6.23.17/drivers/mtd/maps/pmcmsp-ramroot.c
+@@ -79,7 +79,6 @@ static int __init init_rrmap(void)
+ rr_mtd->owner = THIS_MODULE;
+
+ add_mtd_device(rr_mtd);
+- ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, rr_mtd->index);
+
+ return 0;
+ }
+Index: linux-2.6.23.17/drivers/mtd/mtd_blkdevs.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/mtd/mtd_blkdevs.c
++++ linux-2.6.23.17/drivers/mtd/mtd_blkdevs.c
+@@ -24,10 +24,9 @@
+ #include <linux/kthread.h>
+ #include <asm/uaccess.h>
+
+-static LIST_HEAD(blktrans_majors);
++#include "mtdcore.h"
+
+-extern struct mutex mtd_table_mutex;
+-extern struct mtd_info *mtd_table[];
++static LIST_HEAD(blktrans_majors);
+
+ struct mtd_blkcore_priv {
+ struct task_struct *thread;
+@@ -202,7 +201,7 @@ static int blktrans_ioctl(struct inode *
+ }
+ }
+
+-struct block_device_operations mtd_blktrans_ops = {
++static struct block_device_operations mtd_blktrans_ops = {
+ .owner = THIS_MODULE,
+ .open = blktrans_open,
+ .release = blktrans_release,
+Index: linux-2.6.23.17/drivers/mtd/mtdchar.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/mtd/mtdchar.c
++++ linux-2.6.23.17/drivers/mtd/mtdchar.c
+@@ -137,7 +137,8 @@ static int mtd_close(struct inode *inode
+
+ DEBUG(MTD_DEBUG_LEVEL0, "MTD_close\n");
+
+- if (mtd->sync)
++ /* Only sync if opened RW */
++ if ((file->f_mode & 2) && mtd->sync)
+ mtd->sync(mtd);
+
+ put_mtd_device(mtd);
+Index: linux-2.6.23.17/drivers/mtd/mtdcore.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/mtd/mtdcore.c
++++ linux-2.6.23.17/drivers/mtd/mtdcore.c
+@@ -22,6 +22,8 @@
+
+ #include <linux/mtd/mtd.h>
+
++#include "mtdcore.h"
++
+ /* These are exported solely for the purpose of mtd_blkdevs.c. You
+ should not use them for _anything_ else */
+ DEFINE_MUTEX(mtd_table_mutex);
+Index: linux-2.6.23.17/drivers/mtd/nand/Kconfig
+===================================================================
+--- linux-2.6.23.17.orig/drivers/mtd/nand/Kconfig
++++ linux-2.6.23.17/drivers/mtd/nand/Kconfig
+@@ -134,10 +134,10 @@ config MTD_NAND_S3C2410_HWECC
+
+ config MTD_NAND_NDFC
+ tristate "NDFC NanD Flash Controller"
+- depends on 44x
++ depends on 4xx
+ select MTD_NAND_ECC_SMC
+ help
+- NDFC Nand Flash Controllers are integrated in EP44x SoCs
++ NDFC Nand Flash Controllers are integrated in IBM/AMCC's 4xx SoCs
+
+ config MTD_NAND_S3C2410_CLKSTOP
+ bool "S3C2410 NAND IDLE clock stop"
+@@ -237,7 +237,7 @@ config MTD_NAND_CAFE
+ select REED_SOLOMON
+ select REED_SOLOMON_DEC16
+ help
+- Use NAND flash attached to the CAFÉ chip designed for the $100
++ Use NAND flash attached to the CAFÉ chip designed for the OLPC
+ laptop.
+
+ config MTD_NAND_CS553X
+Index: linux-2.6.23.17/drivers/mtd/nand/cafe_nand.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/mtd/nand/cafe_nand.c
++++ linux-2.6.23.17/drivers/mtd/nand/cafe_nand.c
+@@ -822,14 +822,53 @@ static struct pci_device_id cafe_nand_tb
+
+ MODULE_DEVICE_TABLE(pci, cafe_nand_tbl);
+
++static int cafe_nand_resume(struct pci_dev *pdev)
++{
++ uint32_t timing1, timing2, timing3;
++ uint32_t ctrl;
++ struct mtd_info *mtd = pci_get_drvdata(pdev);
++ struct cafe_priv *cafe = mtd->priv;
++
++ timing1 = timing2 = timing3 = 0xffffffff;
++ /* Start off by resetting the NAND controller completely */
++ cafe_writel(cafe, 1, NAND_RESET);
++ cafe_writel(cafe, 0, NAND_RESET);
++ cafe_writel(cafe, timing1, NAND_TIMING1);
++ cafe_writel(cafe, timing2, NAND_TIMING2);
++ cafe_writel(cafe, timing3, NAND_TIMING3);
++ cafe_writel(cafe, 0xffffffff, NAND_IRQ_MASK);
++
++ /* Disable master reset, enable NAND clock */
++ ctrl = cafe_readl(cafe, GLOBAL_CTRL);
++ ctrl &= 0xffffeff0;
++ ctrl |= 0x00007000;
++ cafe_writel(cafe, ctrl | 0x05, GLOBAL_CTRL);
++ cafe_writel(cafe, ctrl | 0x0a, GLOBAL_CTRL);
++ cafe_writel(cafe, 0, NAND_DMA_CTRL);
++ cafe_writel(cafe, 0x7006, GLOBAL_CTRL);
++ cafe_writel(cafe, 0x700a, GLOBAL_CTRL);
++
++ /* Set up DMA address */
++ cafe_writel(cafe, cafe->dmaaddr & 0xffffffff, NAND_DMA_ADDR0);
++ if (sizeof(cafe->dmaaddr) > 4)
++ /* Shift in two parts to shut the compiler up */
++ cafe_writel(cafe, (cafe->dmaaddr >> 16) >> 16, NAND_DMA_ADDR1);
++ else
++ cafe_writel(cafe, 0, NAND_DMA_ADDR1);
++
++ /* Enable NAND IRQ in global IRQ mask register */
++ cafe_writel(cafe, 0x80000007, GLOBAL_IRQ_MASK);
++ return 0;
++}
++
+ static struct pci_driver cafe_nand_pci_driver = {
+ .name = "CAFÉ NAND",
+ .id_table = cafe_nand_tbl,
+ .probe = cafe_nand_probe,
+ .remove = __devexit_p(cafe_nand_remove),
++ .resume = cafe_nand_resume,
+ #ifdef CONFIG_PMx
+ .suspend = cafe_nand_suspend,
+- .resume = cafe_nand_resume,
+ #endif
+ };
+
+Index: linux-2.6.23.17/drivers/mtd/nand/ndfc.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/mtd/nand/ndfc.c
++++ linux-2.6.23.17/drivers/mtd/nand/ndfc.c
+@@ -24,7 +24,11 @@
+ #include <linux/platform_device.h>
+
+ #include <asm/io.h>
++#ifdef CONFIG_40x
++#include <asm/ibm405.h>
++#else
+ #include <asm/ibm44x.h>
++#endif
+
+ struct ndfc_nand_mtd {
+ struct mtd_info mtd;
+@@ -230,7 +234,11 @@ static int ndfc_nand_probe(struct platfo
+ struct ndfc_controller *ndfc = &ndfc_ctrl;
+ unsigned long long phys = settings->ndfc_erpn | res->start;
+
++#ifndef CONFIG_PHYS_64BIT
++ ndfc->ndfcbase = ioremap((phys_addr_t)phys, res->end - res->start + 1);
++#else
+ ndfc->ndfcbase = ioremap64(phys, res->end - res->start + 1);
++#endif
+ if (!ndfc->ndfcbase) {
+ printk(KERN_ERR "NDFC: ioremap failed\n");
+ return -EIO;
+Index: linux-2.6.23.17/drivers/mtd/onenand/Kconfig
+===================================================================
+--- linux-2.6.23.17.orig/drivers/mtd/onenand/Kconfig
++++ linux-2.6.23.17/drivers/mtd/onenand/Kconfig
+@@ -40,4 +40,27 @@ config MTD_ONENAND_OTP
+
+ OTP block is fully-guaranteed to be a valid block.
+
++config MTD_ONENAND_2X_PROGRAM
++ bool "OneNAND 2X program support"
++ help
++ The 2X Program is an extension of Program Operation.
++ Since the device is equipped with two DataRAMs, and two-plane NAND
++ Flash memory array, these two component enables simultaneous program
++ of 4KiB. Plane1 has only even blocks such as block0, block2, block4
++ while Plane2 has only odd blocks such as block1, block3, block5.
++ So MTD regards it as 4KiB page size and 256KiB block size
++
++ Now the following chips support it. (KFXXX16Q2M)
++ Demux: KFG2G16Q2M, KFH4G16Q2M, KFW8G16Q2M,
++ Mux: KFM2G16Q2M, KFN4G16Q2M,
++
++ And more recent chips
++
++config MTD_ONENAND_SIM
++ tristate "OneNAND simulator support"
++ depends on MTD_PARTITIONS
++ help
++ The simulator may simulate various OneNAND flash chips for the
++ OneNAND MTD layer.
++
+ endif # MTD_ONENAND
+Index: linux-2.6.23.17/drivers/mtd/onenand/Makefile
+===================================================================
+--- linux-2.6.23.17.orig/drivers/mtd/onenand/Makefile
++++ linux-2.6.23.17/drivers/mtd/onenand/Makefile
+@@ -8,4 +8,7 @@ obj-$(CONFIG_MTD_ONENAND) += onenand.o
+ # Board specific.
+ obj-$(CONFIG_MTD_ONENAND_GENERIC) += generic.o
+
++# Simulator
++obj-$(CONFIG_MTD_ONENAND_SIM) += onenand_sim.o
++
+ onenand-objs = onenand_base.o onenand_bbt.o
+Index: linux-2.6.23.17/drivers/mtd/onenand/onenand_base.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/mtd/onenand/onenand_base.c
++++ linux-2.6.23.17/drivers/mtd/onenand/onenand_base.c
+@@ -206,6 +206,15 @@ static int onenand_command(struct mtd_in
+ default:
+ block = (int) (addr >> this->erase_shift);
+ page = (int) (addr >> this->page_shift);
++
++ if (ONENAND_IS_2PLANE(this)) {
++ /* Make the even block number */
++ block &= ~1;
++ /* Is it the odd plane? */
++ if (addr & this->writesize)
++ block++;
++ page >>= 1;
++ }
+ page &= this->page_mask;
+ break;
+ }
+@@ -216,8 +225,12 @@ static int onenand_command(struct mtd_in
+ value = onenand_bufferram_address(this, block);
+ this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
+
+- /* Switch to the next data buffer */
+- ONENAND_SET_NEXT_BUFFERRAM(this);
++ if (ONENAND_IS_2PLANE(this))
++ /* It is always BufferRAM0 */
++ ONENAND_SET_BUFFERRAM0(this);
++ else
++ /* Switch to the next data buffer */
++ ONENAND_SET_NEXT_BUFFERRAM(this);
+
+ return 0;
+ }
+@@ -247,6 +260,8 @@ static int onenand_command(struct mtd_in
+ break;
+
+ default:
++ if (ONENAND_IS_2PLANE(this) && cmd == ONENAND_CMD_PROG)
++ cmd = ONENAND_CMD_2X_PROG;
+ dataram = ONENAND_CURRENT_BUFFERRAM(this);
+ break;
+ }
+@@ -445,8 +460,9 @@ static inline int onenand_bufferram_offs
+ struct onenand_chip *this = mtd->priv;
+
+ if (ONENAND_CURRENT_BUFFERRAM(this)) {
++ /* Note: the 'this->writesize' is a real page size */
+ if (area == ONENAND_DATARAM)
+- return mtd->writesize;
++ return this->writesize;
+ if (area == ONENAND_SPARERAM)
+ return mtd->oobsize;
+ }
+@@ -572,6 +588,30 @@ static int onenand_write_bufferram(struc
+ }
+
+ /**
++ * onenand_get_2x_blockpage - [GENERIC] Get blockpage at 2x program mode
++ * @param mtd MTD data structure
++ * @param addr address to check
++ * @return blockpage address
++ *
++ * Get blockpage address at 2x program mode
++ */
++static int onenand_get_2x_blockpage(struct mtd_info *mtd, loff_t addr)
++{
++ struct onenand_chip *this = mtd->priv;
++ int blockpage, block, page;
++
++ /* Calculate the even block number */
++ block = (int) (addr >> this->erase_shift) & ~1;
++ /* Is it the odd plane? */
++ if (addr & this->writesize)
++ block++;
++ page = (int) (addr >> (this->page_shift + 1)) & this->page_mask;
++ blockpage = (block << 7) | page;
++
++ return blockpage;
++}
++
++/**
+ * onenand_check_bufferram - [GENERIC] Check BufferRAM information
+ * @param mtd MTD data structure
+ * @param addr address to check
+@@ -585,7 +625,10 @@ static int onenand_check_bufferram(struc
+ int blockpage, found = 0;
+ unsigned int i;
+
+- blockpage = (int) (addr >> this->page_shift);
++ if (ONENAND_IS_2PLANE(this))
++ blockpage = onenand_get_2x_blockpage(mtd, addr);
++ else
++ blockpage = (int) (addr >> this->page_shift);
+
+ /* Is there valid data? */
+ i = ONENAND_CURRENT_BUFFERRAM(this);
+@@ -625,7 +668,10 @@ static void onenand_update_bufferram(str
+ int blockpage;
+ unsigned int i;
+
+- blockpage = (int) (addr >> this->page_shift);
++ if (ONENAND_IS_2PLANE(this))
++ blockpage = onenand_get_2x_blockpage(mtd, addr);
++ else
++ blockpage = (int) (addr >> this->page_shift);
+
+ /* Invalidate another BufferRAM */
+ i = ONENAND_NEXT_BUFFERRAM(this);
+@@ -734,6 +780,7 @@ static int onenand_read(struct mtd_info
+ int read = 0, column;
+ int thislen;
+ int ret = 0, boundary = 0;
++ int writesize = this->writesize;
+
+ DEBUG(MTD_DEBUG_LEVEL3, "onenand_read: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
+
+@@ -754,22 +801,22 @@ static int onenand_read(struct mtd_info
+ /* Do first load to bufferRAM */
+ if (read < len) {
+ if (!onenand_check_bufferram(mtd, from)) {
+- this->command(mtd, ONENAND_CMD_READ, from, mtd->writesize);
++ this->command(mtd, ONENAND_CMD_READ, from, writesize);
+ ret = this->wait(mtd, FL_READING);
+ onenand_update_bufferram(mtd, from, !ret);
+ }
+ }
+
+- thislen = min_t(int, mtd->writesize, len - read);
+- column = from & (mtd->writesize - 1);
+- if (column + thislen > mtd->writesize)
+- thislen = mtd->writesize - column;
++ thislen = min_t(int, writesize, len - read);
++ column = from & (writesize - 1);
++ if (column + thislen > writesize)
++ thislen = writesize - column;
+
+ while (!ret) {
+ /* If there is more to load then start next load */
+ from += thislen;
+ if (read + thislen < len) {
+- this->command(mtd, ONENAND_CMD_READ, from, mtd->writesize);
++ this->command(mtd, ONENAND_CMD_READ, from, writesize);
+ /*
+ * Chip boundary handling in DDP
+ * Now we issued chip 1 read and pointed chip 1
+@@ -794,7 +841,7 @@ static int onenand_read(struct mtd_info
+ this->write_word(ONENAND_DDP_CHIP1, this->base + ONENAND_REG_START_ADDRESS2);
+ ONENAND_SET_NEXT_BUFFERRAM(this);
+ buf += thislen;
+- thislen = min_t(int, mtd->writesize, len - read);
++ thislen = min_t(int, writesize, len - read);
+ column = 0;
+ cond_resched();
+ /* Now wait for load */
+@@ -1079,7 +1126,7 @@ int onenand_bbt_read_oob(struct mtd_info
+ /* Read more? */
+ if (read < len) {
+ /* Update Page size */
+- from += mtd->writesize;
++ from += this->writesize;
+ column = 0;
+ }
+ }
+@@ -1135,12 +1182,12 @@ static int onenand_verify(struct mtd_inf
+ int thislen, column;
+
+ while (len != 0) {
+- thislen = min_t(int, mtd->writesize, len);
+- column = addr & (mtd->writesize - 1);
+- if (column + thislen > mtd->writesize)
+- thislen = mtd->writesize - column;
++ thislen = min_t(int, this->writesize, len);
++ column = addr & (this->writesize - 1);
++ if (column + thislen > this->writesize)
++ thislen = this->writesize - column;
+
+- this->command(mtd, ONENAND_CMD_READ, addr, mtd->writesize);
++ this->command(mtd, ONENAND_CMD_READ, addr, this->writesize);
+
+ onenand_update_bufferram(mtd, addr, 0);
+
+@@ -1236,6 +1283,10 @@ static int onenand_write(struct mtd_info
+
+ /* In partial page write we don't update bufferram */
+ onenand_update_bufferram(mtd, to, !ret && !subpage);
++ if (ONENAND_IS_2PLANE(this)) {
++ ONENAND_SET_BUFFERRAM1(this);
++ onenand_update_bufferram(mtd, to + this->writesize, !ret && !subpage);
++ }
+
+ if (ret) {
+ printk(KERN_ERR "onenand_write: write filaed %d\n", ret);
+@@ -1384,6 +1435,10 @@ static int onenand_do_write_oob(struct m
+ this->command(mtd, ONENAND_CMD_PROGOOB, to, mtd->oobsize);
+
+ onenand_update_bufferram(mtd, to, 0);
++ if (ONENAND_IS_2PLANE(this)) {
++ ONENAND_SET_BUFFERRAM1(this);
++ onenand_update_bufferram(mtd, to + this->writesize, 0);
++ }
+
+ ret = this->wait(mtd, FL_WRITING);
+ if (ret) {
+@@ -2107,6 +2162,7 @@ static int onenand_lock_user_prot_reg(st
+ *
+ * Check and set OneNAND features
+ * - lock scheme
++ * - two plane
+ */
+ static void onenand_check_features(struct mtd_info *mtd)
+ {
+@@ -2118,19 +2174,35 @@ static void onenand_check_features(struc
+ process = this->version_id >> ONENAND_VERSION_PROCESS_SHIFT;
+
+ /* Lock scheme */
+- if (density >= ONENAND_DEVICE_DENSITY_1Gb) {
++ switch (density) {
++ case ONENAND_DEVICE_DENSITY_4Gb:
++ this->options |= ONENAND_HAS_2PLANE;
++
++ case ONENAND_DEVICE_DENSITY_2Gb:
++ /* 2Gb DDP don't have 2 plane */
++ if (!ONENAND_IS_DDP(this))
++ this->options |= ONENAND_HAS_2PLANE;
++ this->options |= ONENAND_HAS_UNLOCK_ALL;
++
++ case ONENAND_DEVICE_DENSITY_1Gb:
+ /* A-Die has all block unlock */
+- if (process) {
+- printk(KERN_DEBUG "Chip support all block unlock\n");
++ if (process)
+ this->options |= ONENAND_HAS_UNLOCK_ALL;
+- }
+- } else {
+- /* Some OneNAND has continues lock scheme */
+- if (!process) {
+- printk(KERN_DEBUG "Lock scheme is Continues Lock\n");
++ break;
++
++ default:
++ /* Some OneNAND has continuous lock scheme */
++ if (!process)
+ this->options |= ONENAND_HAS_CONT_LOCK;
+- }
++ break;
+ }
++
++ if (this->options & ONENAND_HAS_CONT_LOCK)
++ printk(KERN_DEBUG "Lock scheme is Continuous Lock\n");
++ if (this->options & ONENAND_HAS_UNLOCK_ALL)
++ printk(KERN_DEBUG "Chip support all block unlock\n");
++ if (this->options & ONENAND_HAS_2PLANE)
++ printk(KERN_DEBUG "Chip has 2 plane\n");
+ }
+
+ /**
+@@ -2257,6 +2329,8 @@ static int onenand_probe(struct mtd_info
+ this->erase_shift = ffs(mtd->erasesize) - 1;
+ this->page_shift = ffs(mtd->writesize) - 1;
+ this->page_mask = (1 << (this->erase_shift - this->page_shift)) - 1;
++ /* It's real page size */
++ this->writesize = mtd->writesize;
+
+ /* REVIST: Multichip handling */
+
+@@ -2265,6 +2339,17 @@ static int onenand_probe(struct mtd_info
+ /* Check OneNAND features */
+ onenand_check_features(mtd);
+
++ /*
++ * We emulate the 4KiB page and 256KiB erase block size
++ * But oobsize is still 64 bytes.
++ * It is only valid if you turn on 2X program support,
++ * Otherwise it will be ignored by compiler.
++ */
++ if (ONENAND_IS_2PLANE(this)) {
++ mtd->writesize <<= 1;
++ mtd->erasesize <<= 1;
++ }
++
+ return 0;
+ }
+
+Index: linux-2.6.23.17/drivers/pci/quirks.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/pci/quirks.c
++++ linux-2.6.23.17/drivers/pci/quirks.c
+@@ -1396,6 +1396,17 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN
+ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260b, quirk_intel_pcie_pm);
+
+ /*
++ * According to Tom Sylla, the Geode does not support PCI power management
++ * transition, so we shouldn't need the D3hot delay.
++ */
++static void __init quirk_geode_pci_pm(struct pci_dev *dev)
++{
++ pci_pm_d3_delay = 0;
++}
++DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, quirk_geode_pci_pm);
++DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, quirk_geode_pci_pm);
++
++/*
+ * Toshiba TC86C001 IDE controller reports the standard 8-byte BAR0 size
+ * but the PIO transfers won't work if BAR0 falls at the odd 8 bytes.
+ * Re-allocate the region if needed...
+Index: linux-2.6.23.17/drivers/video/Kconfig
+===================================================================
+--- linux-2.6.23.17.orig/drivers/video/Kconfig
++++ linux-2.6.23.17/drivers/video/Kconfig
+@@ -594,7 +594,7 @@ config FB_TGA
+
+ config FB_VESA
+ bool "VESA VGA graphics support"
+- depends on (FB = y) && X86
++ depends on (FB = y) && X86 && !VGA_NOPROBE
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+@@ -1028,7 +1028,7 @@ config FB_CARILLO_RANCH
+
+ config FB_INTEL
+ tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G support (EXPERIMENTAL)"
+- depends on FB && EXPERIMENTAL && PCI && X86
++ depends on FB && EXPERIMENTAL && PCI && X86 && !VGA_NOPROBE
+ select AGP
+ select AGP_INTEL
+ select FB_MODE_HELPERS
+@@ -1383,7 +1383,7 @@ config FB_SAVAGE_ACCEL
+
+ config FB_SIS
+ tristate "SiS/XGI display support"
+- depends on FB && PCI
++ depends on FB && PCI && !VGA_NOPROBE
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+@@ -1822,6 +1822,15 @@ config FB_PS3_DEFAULT_SIZE_M
+ The default value can be overridden on the kernel command line
+ using the "ps3fb" option (e.g. "ps3fb=9M");
+
++config FB_OLPC_DCON
++ tristate "One Laptop Per Child Display CONtroller support"
++ depends on OLPC
++ select I2C
++ ---help---
++ Add support for the OLPC DCON controller. This controller is only
++ available on OLPC platforms. Unless you have one of these
++ platforms, you will want to say 'N'.
++
+ config FB_XILINX
+ tristate "Xilinx frame buffer support"
+ depends on FB && XILINX_VIRTEX
+Index: linux-2.6.23.17/drivers/video/Makefile
+===================================================================
+--- linux-2.6.23.17.orig/drivers/video/Makefile
++++ linux-2.6.23.17/drivers/video/Makefile
+@@ -111,6 +111,7 @@ obj-$(CONFIG_FB_PNX4008_DUM_RGB) += pnx
+ obj-$(CONFIG_FB_IBM_GXT4500) += gxt4500.o
+ obj-$(CONFIG_FB_PS3) += ps3fb.o
+ obj-$(CONFIG_FB_SM501) += sm501fb.o
++obj-$(CONFIG_FB_OLPC_DCON) += olpc_dcon.o
+ obj-$(CONFIG_FB_XILINX) += xilinxfb.o
+ obj-$(CONFIG_FB_OMAP) += omap/
+
+Index: linux-2.6.23.17/drivers/video/fbmem.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/video/fbmem.c
++++ linux-2.6.23.17/drivers/video/fbmem.c
+@@ -820,6 +820,53 @@ static void try_to_load(int fb)
+ #endif /* CONFIG_KMOD */
+
+ int
++fb_powerup(struct fb_info *info)
++{
++ int ret = 0;
++
++ if (!info || info->state == FBINFO_STATE_RUNNING)
++ return 0;
++
++ if (info->fbops->fb_powerup)
++ ret = info->fbops->fb_powerup(info);
++
++ if (!ret) {
++ acquire_console_sem();
++ fb_set_suspend(info, 0);
++ release_console_sem();
++ }
++
++ return ret;
++}
++
++int
++fb_powerdown(struct fb_info *info)
++{
++ int ret = 0;
++
++ if (!info || info->state == FBINFO_STATE_SUSPENDED)
++ return 0;
++
++ /* Tell everybody that the fbdev is going down */
++ acquire_console_sem();
++ fb_set_suspend(info, 1);
++ release_console_sem();
++
++ if (info->fbops->fb_powerdown)
++ ret = info->fbops->fb_powerdown(info);
++
++ /* If the power down failed, then un-notify */
++
++ if (ret) {
++ acquire_console_sem();
++ fb_set_suspend(info, 0);
++ release_console_sem();
++ }
++
++ return ret;
++}
++
++int
+ fb_pan_display(struct fb_info *info, struct fb_var_screeninfo *var)
+ {
+ struct fb_fix_screeninfo *fix = &info->fix;
+Index: linux-2.6.23.17/drivers/video/geode/Makefile
+===================================================================
+--- linux-2.6.23.17.orig/drivers/video/geode/Makefile
++++ linux-2.6.23.17/drivers/video/geode/Makefile
+@@ -5,5 +5,5 @@ obj-$(CONFIG_FB_GEODE_GX) += gxfb.o
+ obj-$(CONFIG_FB_GEODE_LX) += lxfb.o
+
+ gx1fb-objs := gx1fb_core.o display_gx1.o video_cs5530.o
+-gxfb-objs := gxfb_core.o display_gx.o video_gx.o
++gxfb-objs := gxfb_core.o display_gx.o video_gx.o suspend_gx.o
+ lxfb-objs := lxfb_core.o lxfb_ops.o
+Index: linux-2.6.23.17/drivers/video/geode/display_gx.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/video/geode/display_gx.c
++++ linux-2.6.23.17/drivers/video/geode/display_gx.c
+@@ -11,26 +11,44 @@
+ * Free Software Foundation; either version 2 of the License, or * (at your
+ * option) any later version.
+ */
++
++#include <linux/kernel.h>
+ #include <linux/spinlock.h>
+ #include <linux/fb.h>
+ #include <linux/delay.h>
+ #include <asm/io.h>
+ #include <asm/div64.h>
+ #include <asm/delay.h>
++#include <asm/olpc.h>
+
+ #include "geodefb.h"
+ #include "display_gx.h"
+
+-#ifdef CONFIG_FB_GEODE_GX_SET_FBSIZE
+-unsigned int gx_frame_buffer_size(void)
++static inline void rmwl(u32 val, u32 *reg)
+ {
+- return CONFIG_FB_GEODE_GX_FBSIZE;
++ u32 in = readl(reg);
++ if (in != val)
++ writel(val, reg);
+ }
+-#else
++
+ unsigned int gx_frame_buffer_size(void)
+ {
+ unsigned int val;
+
++#ifdef CONFIG_OLPC
++ if (machine_is_olpc() && !olpc_has_vsa()) {
++ u32 hi,lo;
++ rdmsr(GLIU0_P2D_RO0, lo, hi);
++
++ /* Top page number */
++ val = ((hi & 0xff) << 12) | ((lo & 0xfff00000) >> 20);
++
++ val -= (lo & 0x000fffff); /* Subtract bottom page number */
++ val += 1; /* Adjust page count */
++ return (val << 12);
++ }
++#endif
++
+ /* FB size is reported by a virtual register */
+ /* Virtual register class = 0x02 */
+ /* VG_MEM_SIZE(512Kb units) = 0x00 */
+@@ -41,7 +59,6 @@ unsigned int gx_frame_buffer_size(void)
+ val = (unsigned int)(inw(0xAC1E)) & 0xFFl;
+ return (val << 19);
+ }
+-#endif
+
+ int gx_line_delta(int xres, int bpp)
+ {
+@@ -63,23 +80,23 @@ static void gx_set_mode(struct fb_info *
+ gcfg = readl(par->dc_regs + DC_GENERAL_CFG);
+ dcfg = readl(par->dc_regs + DC_DISPLAY_CFG);
+
+- /* Disable the timing generator. */
+- dcfg &= ~(DC_DCFG_TGEN);
+- writel(dcfg, par->dc_regs + DC_DISPLAY_CFG);
+-
+- /* Wait for pending memory requests before disabling the FIFO load. */
+- udelay(100);
+-
+- /* Disable FIFO load and compression. */
+- gcfg &= ~(DC_GCFG_DFLE | DC_GCFG_CMPE | DC_GCFG_DECE);
+- writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
+-
+- /* Setup DCLK and its divisor. */
+- par->vid_ops->set_dclk(info);
+-
+- /*
+- * Setup new mode.
+- */
++ /* Programming the clock is costly and ugly, so avoid if if we can */
++
++ if (par->curdclk != info->var.pixclock) {
++ /* Disable the timing generator. */
++ dcfg &= ~(DC_DCFG_TGEN);
++ writel(dcfg, par->dc_regs + DC_DISPLAY_CFG);
++
++ /* Wait for pending memory requests before disabling the FIFO load. */
++ udelay(100);
++
++ /* Disable FIFO load and compression. */
++ gcfg &= ~(DC_GCFG_DFLE | DC_GCFG_CMPE | DC_GCFG_DECE);
++ writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
++
++ /* Setup DCLK and its divisor. */
++ par->vid_ops->set_dclk(info);
++ }
+
+ /* Clear all unused feature bits. */
+ gcfg &= DC_GCFG_YUVM | DC_GCFG_VDSE;
+@@ -90,12 +107,13 @@ static void gx_set_mode(struct fb_info *
+ gcfg |= (6 << DC_GCFG_DFHPEL_POS) | (5 << DC_GCFG_DFHPSL_POS) | DC_GCFG_DFLE;
+
+ /* Framebuffer start offset. */
+- writel(0, par->dc_regs + DC_FB_ST_OFFSET);
++ rmwl(0, par->dc_regs + DC_FB_ST_OFFSET);
+
+ /* Line delta and line buffer length. */
+- writel(info->fix.line_length >> 3, par->dc_regs + DC_GFX_PITCH);
+- writel(((info->var.xres * info->var.bits_per_pixel/8) >> 3) + 2,
+- par->dc_regs + DC_LINE_SIZE);
++ rmwl(info->fix.line_length >> 3, par->dc_regs + DC_GFX_PITCH);
++
++ rmwl(((info->var.xres * info->var.bits_per_pixel/8) >> 3) + 2,
++ par->dc_regs + DC_LINE_SIZE);
+
+
+ /* Enable graphics and video data and unmask address lines. */
+@@ -134,17 +152,16 @@ static void gx_set_mode(struct fb_info *
+ vblankend = vsyncend + info->var.upper_margin;
+ vtotal = vblankend;
+
+- writel((hactive - 1) | ((htotal - 1) << 16), par->dc_regs + DC_H_ACTIVE_TIMING);
+- writel((hblankstart - 1) | ((hblankend - 1) << 16), par->dc_regs + DC_H_BLANK_TIMING);
+- writel((hsyncstart - 1) | ((hsyncend - 1) << 16), par->dc_regs + DC_H_SYNC_TIMING);
+-
+- writel((vactive - 1) | ((vtotal - 1) << 16), par->dc_regs + DC_V_ACTIVE_TIMING);
+- writel((vblankstart - 1) | ((vblankend - 1) << 16), par->dc_regs + DC_V_BLANK_TIMING);
+- writel((vsyncstart - 1) | ((vsyncend - 1) << 16), par->dc_regs + DC_V_SYNC_TIMING);
++ rmwl((hactive - 1) | ((htotal - 1) << 16), par->dc_regs + DC_H_ACTIVE_TIMING);
++ rmwl((hblankstart - 1) | ((hblankend - 1) << 16), par->dc_regs + DC_H_BLANK_TIMING);
++ rmwl((hsyncstart - 1) | ((hsyncend - 1) << 16), par->dc_regs + DC_H_SYNC_TIMING);
++ rmwl((vactive - 1) | ((vtotal - 1) << 16), par->dc_regs + DC_V_ACTIVE_TIMING);
++ rmwl((vblankstart - 1) | ((vblankend - 1) << 16), par->dc_regs + DC_V_BLANK_TIMING);
++ rmwl((vsyncstart - 1) | ((vsyncend - 1) << 16), par->dc_regs + DC_V_SYNC_TIMING);
+
+ /* Write final register values. */
+- writel(dcfg, par->dc_regs + DC_DISPLAY_CFG);
+- writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
++ rmwl(dcfg, par->dc_regs + DC_DISPLAY_CFG);
++ rmwl(gcfg, par->dc_regs + DC_GENERAL_CFG);
+
+ par->vid_ops->configure_display(info);
+
+Index: linux-2.6.23.17/drivers/video/geode/display_gx.h
+===================================================================
+--- linux-2.6.23.17.orig/drivers/video/geode/display_gx.h
++++ linux-2.6.23.17/drivers/video/geode/display_gx.h
+@@ -20,6 +20,9 @@ extern struct geode_dc_ops gx_dc_ops;
+ #define GLD_MSR_CONFIG 0xC0002001
+ #define GLD_MSR_CONFIG_DM_FP 0x40
+
++/* Used for memory dection on the OLPC */
++#define GLIU0_P2D_RO0 0x10000029
++
+ /* Display controller registers */
+
+ #define DC_UNLOCK 0x00
+Index: linux-2.6.23.17/drivers/video/geode/geodefb.h
+===================================================================
+--- linux-2.6.23.17.orig/drivers/video/geode/geodefb.h
++++ linux-2.6.23.17/drivers/video/geode/geodefb.h
+@@ -12,6 +12,10 @@
+ #ifndef __GEODEFB_H__
+ #define __GEODEFB_H__
+
++#define FB_POWER_STATE_OFF 0
++#define FB_POWER_STATE_SUSPEND 1
++#define FB_POWER_STATE_ON 2
++
+ struct geodefb_info;
+
+ struct geode_dc_ops {
+@@ -21,18 +25,24 @@ struct geode_dc_ops {
+
+ struct geode_vid_ops {
+ void (*set_dclk)(struct fb_info *);
++ unsigned int (*get_dclk)(struct fb_info *);
+ void (*configure_display)(struct fb_info *);
+ int (*blank_display)(struct fb_info *, int blank_mode);
+ };
+
+ struct geodefb_par {
+ int enable_crt;
++ int fbactive; /* True if the current console is in KD_GRAPHICS mode */
+ int panel_x; /* dimensions of an attached flat panel, non-zero => enable panel */
+ int panel_y;
++ unsigned int curdclk; /* Used by GX to avoid unnessesary clock switching */
+ void __iomem *dc_regs;
+ void __iomem *vid_regs;
++ void __iomem *gp_regs;
+ struct geode_dc_ops *dc_ops;
+ struct geode_vid_ops *vid_ops;
++
++ int state;
+ };
+
+ #endif /* !__GEODEFB_H__ */
+Index: linux-2.6.23.17/drivers/video/geode/gxfb_core.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/video/geode/gxfb_core.c
++++ linux-2.6.23.17/drivers/video/geode/gxfb_core.c
+@@ -30,12 +30,31 @@
+ #include <linux/fb.h>
+ #include <linux/init.h>
+ #include <linux/pci.h>
++#include <linux/notifier.h>
++#include <linux/vt_kern.h>
++#include <linux/console.h>
++#include <asm/uaccess.h>
++#include <asm/olpc.h>
+
+ #include "geodefb.h"
+ #include "display_gx.h"
+ #include "video_gx.h"
+
++#define FBIOSGAMMA _IOW('F', 0x20, void *)
++#define FBIOGGAMMA _IOW('F', 0x21, void *)
++
++#ifdef DEBUG
++
++#define FBIODUMPGP _IOW('F', 0x22, void *)
++#define FBIODUMPDC _IOW('F', 0x23, void *)
++#define FBIODUMPVP _IOW('F', 0x24, void *)
++#define FBIODUMPFP _IOW('F', 0x25, void *)
++
++#endif
++
+ static char *mode_option;
++static int noclear;
++struct fb_info *gxfb_info;
+
+ /* Modes relevant to the GX (taken from modedb.c) */
+ static const struct fb_videomode gx_modedb[] __initdata = {
+@@ -103,8 +122,20 @@ static const struct fb_videomode gx_mode
+ { NULL, 85, 1600, 1200, 4357, 304, 64, 46, 1, 192, 3,
+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++ /* 1200x900-75 - CRT timings for the OLPC mode */
++ { NULL, 75, 1200, 900, 8049, 104, 240, 29, 54, 136, 3,
++ 0, FB_VMODE_NONINTERLACED, 0 }
+ };
+
++#ifdef CONFIG_OLPC
++static const struct fb_videomode gx_dcon_modedb[] __initdata = {
++ /* The only mode the DCON has is 1200x900 */
++ { NULL, 50, 1200, 900, 17460, 24, 8, 4, 5, 8, 3,
++ 0, FB_VMODE_NONINTERLACED, 0 }
++};
++#endif
++
++
+ static int gxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+ {
+ if (var->xres > 1600 || var->yres > 1200)
+@@ -137,7 +168,7 @@ static int gxfb_check_var(struct fb_var_
+ return 0;
+ }
+
+-static int gxfb_set_par(struct fb_info *info)
++int gxfb_set_par(struct fb_info *info)
+ {
+ struct geodefb_par *par = info->par;
+
+@@ -204,16 +235,26 @@ static int gxfb_blank(int blank_mode, st
+ return par->vid_ops->blank_display(info, blank_mode);
+ }
+
++static int fbsize;
++
+ static int __init gxfb_map_video_memory(struct fb_info *info, struct pci_dev *dev)
+ {
+ struct geodefb_par *par = info->par;
+- int fb_len;
+ int ret;
+
+ ret = pci_enable_device(dev);
+ if (ret < 0)
+ return ret;
+
++ ret = pci_request_region(dev, 1, "gxfb (graphics processor)");
++ if (ret < 0)
++ return ret;
++
++ par->gp_regs = ioremap(pci_resource_start(dev, 1),
++ pci_resource_len(dev, 1));
++ if (!par->gp_regs)
++ return -ENOMEM;
++
+ ret = pci_request_region(dev, 3, "gxfb (video processor)");
+ if (ret < 0)
+ return ret;
+@@ -232,36 +273,118 @@ static int __init gxfb_map_video_memory(
+ ret = pci_request_region(dev, 0, "gxfb (framebuffer)");
+ if (ret < 0)
+ return ret;
+- if ((fb_len = gx_frame_buffer_size()) < 0)
+- return -ENOMEM;
++
++ /* If the fbsize wasn't specified then try to probe it */
++
++ if (!fbsize) {
++ fbsize = gx_frame_buffer_size();
++ if (fbsize == 0)
++ return -ENOMEM;
++ }
++
+ info->fix.smem_start = pci_resource_start(dev, 0);
+- info->fix.smem_len = fb_len;
++ info->fix.smem_len = fbsize;
+ info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len);
+ if (!info->screen_base)
+ return -ENOMEM;
+
+- /* Set the 16MB aligned base address of the graphics memory region
++ /* Set the 16MiB aligned base address of the graphics memory region
+ * in the display controller */
+
+ writel(info->fix.smem_start & 0xFF000000,
+ par->dc_regs + DC_GLIU0_MEM_OFFSET);
+
+- dev_info(&dev->dev, "%d Kibyte of video memory at 0x%lx\n",
++ dev_info(&dev->dev, "%d KiB of video memory at 0x%lx\n",
+ info->fix.smem_len / 1024, info->fix.smem_start);
+
+ return 0;
+ }
+
++static int gxfb_ioctl( struct fb_info *info, unsigned int cmd,
++ unsigned long arg)
++{
++ unsigned int gamma[GXFB_GAMMA_DWORDS];
++ int ret = -EINVAL;
++ struct geodefb_par *par = info->par;
++ int i;
++
++ switch(cmd) {
++ case FBIOSGAMMA:
++ /* Read the gamma information from the user - 256 dwords */
++
++ if (copy_from_user(gamma, (void * __user) arg, GXFB_GAMMA_SIZE))
++ return -EFAULT;
++
++ writel(0, par->vid_regs + GX_GAR);
++
++ /* Sequential writes to the data register will increment the
++ address automatically */
++
++ for(i = 0; i < GXFB_GAMMA_DWORDS; i++)
++ writel(gamma[i] & 0xFFFFFF, par->vid_regs + GX_GDR);
++
++ writel(readl(par->vid_regs + GX_MISC) & ~GX_MISC_GAM_EN,
++ par->vid_regs + GX_MISC);
++
++ ret = 0;
++ break;
++
++ case FBIOGGAMMA:
++ if (readl(par->vid_regs + GX_MISC) & GX_MISC_GAM_EN)
++ return -EINVAL;
++
++ memset(gamma, 0, GXFB_GAMMA_SIZE);
++ writel(0, par->vid_regs + GX_GAR);
++
++ for(i = 0; i < GXFB_GAMMA_DWORDS;i++)
++ gamma[i] = readl(par->vid_regs + GX_GDR);
++
++ if (copy_to_user((void * __user) arg, gamma, GXFB_GAMMA_SIZE))
++ ret = -EFAULT;
++ else
++ ret = 0;
++
++ break;
++
++#ifdef DEBUG
++ case FBIODUMPGP:
++ ret = 0;
++ dump_regs(info, 0);
++ break;
++
++ case FBIODUMPDC:
++ ret = 0;
++ dump_regs(info, 1);
++ break;
++
++ case FBIODUMPVP:
++ ret = 0;
++ dump_regs(info, 2);
++ break;
++
++ case FBIODUMPFP:
++ ret = 0;
++ dump_regs(info, 3);
++ break;
++#endif
++ }
++
++ return ret;
++}
++
+ static struct fb_ops gxfb_ops = {
+ .owner = THIS_MODULE,
+ .fb_check_var = gxfb_check_var,
+ .fb_set_par = gxfb_set_par,
+ .fb_setcolreg = gxfb_setcolreg,
+ .fb_blank = gxfb_blank,
++ .fb_ioctl = gxfb_ioctl,
+ /* No HW acceleration for now. */
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
++ .fb_powerdown = gxfb_powerdown,
++ .fb_powerup = gxfb_powerup,
+ };
+
+ static struct fb_info * __init gxfb_init_fbinfo(struct device *dev)
+@@ -303,23 +426,86 @@ static struct fb_info * __init gxfb_init
+ return info;
+ }
+
+-static int __init gxfb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
++static int gxfb_console_notify(struct notifier_block *self,
++ unsigned long action, void *data)
++{
++ if (gxfb_info != NULL) {
++ struct geodefb_par *par = gxfb_info->par;
++ par->fbactive = (action == CONSOLE_EVENT_SWITCH_TEXT) ? 0 : 1;
++ }
++
++ return NOTIFY_OK;
++}
++
++static struct notifier_block gxfb_console_notifier = {
++ .notifier_call = gxfb_console_notify
++};
++
++#ifdef CONFIG_PM
++
++static int gxfb_suspend(struct pci_dev *pdev, pm_message_t state)
++{
++ struct fb_info *info = pci_get_drvdata(pdev);
++ struct geodefb_par *par = info->par;
++
++ if (pdev->dev.power.power_state.event == state.event)
++ return 0;
++
++ if (state.event == PM_EVENT_SUSPEND) {
++
++ acquire_console_sem();
++ gxfb_powerdown(info);
++
++ par->state = FB_POWER_STATE_OFF;
++ fb_set_suspend(info, 1);
++
++ release_console_sem();
++ }
++
++ pdev->dev.power.power_state = state;
++ return 0;
++}
++
++static int gxfb_resume(struct pci_dev *pdev)
++{
++ struct fb_info *info = pci_get_drvdata(pdev);
++
++ acquire_console_sem();
++
++ /* Turn the engine completely on */
++
++ if (gxfb_powerup(info))
++ printk(KERN_ERR "gxfb: Powerup failed\n");
++
++ fb_set_suspend(info, 0);
++ release_console_sem();
++
++ pdev->dev.power.power_state = PMSG_ON;
++ return 0;
++}
++#endif
++
++static int __init gxfb_probe(struct pci_dev *pdev,
++ const struct pci_device_id *id)
+ {
+ struct geodefb_par *par;
+- struct fb_info *info;
+ int ret;
+ unsigned long val;
+
+- info = gxfb_init_fbinfo(&pdev->dev);
+- if (!info)
++ struct fb_videomode *modedb_ptr;
++ int modedb_size;
++
++ gxfb_info = gxfb_init_fbinfo(&pdev->dev);
++ if (gxfb_info == NULL)
+ return -ENOMEM;
+- par = info->par;
++
++ par = gxfb_info->par;
+
+ /* GX display controller and GX video device. */
+ par->dc_ops = &gx_dc_ops;
+ par->vid_ops = &gx_vid_ops;
+
+- if ((ret = gxfb_map_video_memory(info, pdev)) < 0) {
++ if ((ret = gxfb_map_video_memory(gxfb_info, pdev)) < 0) {
+ dev_err(&pdev->dev, "failed to map frame buffer or controller registers\n");
+ goto err;
+ }
+@@ -333,32 +519,60 @@ static int __init gxfb_probe(struct pci_
+ else
+ par->enable_crt = 1;
+
+- ret = fb_find_mode(&info->var, info, mode_option,
+- gx_modedb, ARRAY_SIZE(gx_modedb), NULL, 16);
++ /* Get the current dotclock */
++
++ par->curdclk = (par->vid_ops->get_dclk) ? par->vid_ops->get_dclk(gxfb_info) : 0;
++
++ /* We need to determine a display mode right now, so we will
++ * check to see if the DCON was previously detected by the BIOS
++ * and use that to make our mode database decision.
++ */
++
++ modedb_ptr = (struct fb_videomode *) gx_modedb;
++ modedb_size = ARRAY_SIZE(gx_modedb);
++
++#ifdef CONFIG_OLPC
++ if (olpc_has_dcon()) {
++ modedb_ptr = (struct fb_videomode *) gx_dcon_modedb;
++ modedb_size = ARRAY_SIZE(gx_dcon_modedb);
++ }
++#endif
++
++ ret = fb_find_mode(&gxfb_info->var, gxfb_info, mode_option,
++ modedb_ptr, modedb_size, NULL, 16);
++
+ if (ret == 0 || ret == 4) {
+ dev_err(&pdev->dev, "could not find valid video mode\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
++ /* Clear the screen of garbage, unless noclear was specified,
++ * in which case we assume the user knows what he is doing */
++
++ if (!noclear)
++ memset_io(gxfb_info->screen_base, 0, gxfb_info->fix.smem_len);
++
++ gxfb_check_var(&gxfb_info->var, gxfb_info);
++ gxfb_set_par(gxfb_info);
++
++ /* We are powered up */
++ par->state = FB_POWER_STATE_ON;
+
+- /* Clear the frame buffer of garbage. */
+- memset_io(info->screen_base, 0, info->fix.smem_len);
+
+- gxfb_check_var(&info->var, info);
+- gxfb_set_par(info);
++ console_event_register(&gxfb_console_notifier);
+
+- if (register_framebuffer(info) < 0) {
++ if (register_framebuffer(gxfb_info) < 0) {
+ ret = -EINVAL;
+ goto err;
+ }
+- pci_set_drvdata(pdev, info);
+- printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node, info->fix.id);
++ pci_set_drvdata(pdev, gxfb_info);
++ printk(KERN_INFO "fb%d: %s frame buffer device\n", gxfb_info->node, gxfb_info->fix.id);
+ return 0;
+
+ err:
+- if (info->screen_base) {
+- iounmap(info->screen_base);
++ if (gxfb_info->screen_base) {
++ iounmap(gxfb_info->screen_base);
+ pci_release_region(pdev, 0);
+ }
+ if (par->vid_regs) {
+@@ -370,8 +584,9 @@ static int __init gxfb_probe(struct pci_
+ pci_release_region(pdev, 2);
+ }
+
+- if (info)
+- framebuffer_release(info);
++ if (gxfb_info)
++ framebuffer_release(gxfb_info);
++
+ return ret;
+ }
+
+@@ -397,9 +612,7 @@ static void gxfb_remove(struct pci_dev *
+ }
+
+ static struct pci_device_id gxfb_id_table[] = {
+- { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_GX_VIDEO,
+- PCI_ANY_ID, PCI_ANY_ID, PCI_BASE_CLASS_DISPLAY << 16,
+- 0xff0000, 0 },
++ { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_GX_VIDEO) },
+ { 0, }
+ };
+
+@@ -410,22 +623,30 @@ static struct pci_driver gxfb_driver = {
+ .id_table = gxfb_id_table,
+ .probe = gxfb_probe,
+ .remove = gxfb_remove,
++#ifdef CONFIG_PM
++ .suspend = gxfb_suspend,
++ .resume = gxfb_resume
++#endif
+ };
+
+ #ifndef MODULE
+-static int __init gxfb_setup(char *options)
+-{
++static int __init gxfb_setup(char *options) {
+
+ char *opt;
+
+ if (!options || !*options)
+ return 0;
+
+- while ((opt = strsep(&options, ",")) != NULL) {
++ while((opt = strsep(&options, ",")) != NULL) {
+ if (!*opt)
+ continue;
+
+- mode_option = opt;
++ if (!strncmp(opt, "fbsize:", 7))
++ fbsize = simple_strtoul(opt+7, NULL, 0);
++ else if (!strcmp(opt, "noclear"))
++ noclear = 1;
++ else
++ mode_option = opt;
+ }
+
+ return 0;
+@@ -444,7 +665,6 @@ static int __init gxfb_init(void)
+ #endif
+ return pci_register_driver(&gxfb_driver);
+ }
+-
+ static void __exit gxfb_cleanup(void)
+ {
+ pci_unregister_driver(&gxfb_driver);
+@@ -456,5 +676,8 @@ module_exit(gxfb_cleanup);
+ module_param(mode_option, charp, 0);
+ MODULE_PARM_DESC(mode_option, "video mode (<x>x<y>[-<bpp>][@<refr>])");
+
++module_param(fbsize, int, 0);
++MODULE_PARM_DESC(fbsize, "video memory size");
++
+ MODULE_DESCRIPTION("Framebuffer driver for the AMD Geode GX");
+ MODULE_LICENSE("GPL");
+Index: linux-2.6.23.17/drivers/video/geode/lxfb.h
+===================================================================
+--- linux-2.6.23.17.orig/drivers/video/geode/lxfb.h
++++ linux-2.6.23.17/drivers/video/geode/lxfb.h
+@@ -25,10 +25,23 @@ void lx_set_mode(struct fb_info *);
+ void lx_get_gamma(struct fb_info *, unsigned int *, int);
+ void lx_set_gamma(struct fb_info *, unsigned int *, int);
+ unsigned int lx_framebuffer_size(void);
++int lx_shutdown(struct fb_info *);
++int lx_powerup(struct fb_info *);
+ int lx_blank_display(struct fb_info *, int);
+ void lx_set_palette_reg(struct fb_info *, unsigned int, unsigned int,
+ unsigned int, unsigned int);
+
++
++
++/* ioctl() defines */
++
++#define FBIOSGAMMA _IOW('F', 0x20, void *)
++#define FBIOGGAMMA _IOW('F', 0x21, void *)
++
++/* General definitions */
++#define LXFB_GAMMA_DWORDS 256 /* number of dwords in the gamma ram */
++#define LXFB_GAMMA_SIZE (LXFB_GAMMA_DWORDS * sizeof(unsigned int))
++
+ /* MSRS */
+
+ #define MSR_LX_GLD_CONFIG 0x48002001
+Index: linux-2.6.23.17/drivers/video/geode/lxfb_core.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/video/geode/lxfb_core.c
++++ linux-2.6.23.17/drivers/video/geode/lxfb_core.c
+@@ -22,6 +22,7 @@
+ #include <linux/init.h>
+ #include <linux/pci.h>
+ #include <linux/uaccess.h>
++#include <asm/olpc.h>
+
+ #include "lxfb.h"
+
+@@ -35,186 +36,84 @@ static int fbsize;
+ */
+
+ const struct fb_videomode geode_modedb[] __initdata = {
+- /* 640x480-60 */
+- { NULL, 60, 640, 480, 39682, 48, 8, 25, 2, 88, 2,
++ /* 640x480-60 VESA */
++ { NULL, 60, 640, 480, 39682, 48, 16, 33, 10, 96, 2,
++ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++ /* 640x480-75 VESA */
++ { NULL, 75, 640, 480, 31746, 120, 16, 16, 01, 64, 3,
++ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++ /* 640x480-85 VESA */
++ { NULL, 85, 640, 480, 27777, 80, 56, 25, 01, 56, 3,
++ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++ /* 800x600-60 VESA */
++ { NULL, 60, 800, 600, 25000, 88, 40, 23, 01, 128, 4,
++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++ /* 800x600-75 VESA */
++ { NULL, 75, 800, 600, 20202, 160, 16, 21, 01, 80, 3,
++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++ /* 800x600-85 VESA */
++ { NULL, 85, 800, 600, 17761, 152, 32, 27, 01, 64, 3,
++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++ /* 1024x768-60 VESA */
++ { NULL, 60, 1024, 768, 15384, 160, 24, 29, 3, 136, 6,
++ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++ /* 1024x768-75 VESA */
++ { NULL, 75, 1024, 768, 12690, 176, 16, 28, 1, 96, 3,
++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++ /* 1024x768-85 VESA */
++ { NULL, 85, 1024, 768, 10582, 208, 48, 36, 1, 96, 3,
++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++ /* 1280x960-60 VESA */
++ { NULL, 60, 1280, 960, 9259, 312, 96, 36, 1, 112, 3,
++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++ /* 1280x960-85 VESA */
++ { NULL, 85, 1280, 960, 6734, 224, 64, 47, 1, 160, 3,
++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++ /* 1280x1024-60 VESA */
++ { NULL, 60, 1280, 1024, 9259, 248, 48, 38, 1, 112, 3,
++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++ /* 1280x1024-75 VESA */
++ { NULL, 75, 1280, 1024, 7407, 248, 16, 38, 1, 144, 3,
++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++ /* 1280x1024-85 VESA */
++ { NULL, 85, 1280, 1024, 6349, 224, 64, 44, 1, 160, 3,
+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+- FB_VMODE_NONINTERLACED, 0 },
+- /* 640x400-70 */
+- { NULL, 70, 640, 400, 39770, 40, 8, 28, 5, 96, 2,
+- FB_SYNC_HOR_HIGH_ACT,
+- FB_VMODE_NONINTERLACED, 0 },
+- /* 640x480-70 */
+- { NULL, 70, 640, 480, 35014, 88, 24, 15, 2, 64, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 640x480-72 */
+- { NULL, 72, 640, 480, 32102, 120, 16, 20, 1, 40, 3,
+- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+- FB_VMODE_NONINTERLACED, 0 },
+- /* 640x480-75 */
+- { NULL, 75, 640, 480, 31746, 120, 16, 16, 1, 64, 3,
+- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+- FB_VMODE_NONINTERLACED, 0 },
+- /* 640x480-85 */
+- { NULL, 85, 640, 480, 27780, 80, 56, 25, 1, 56, 3,
+- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+- FB_VMODE_NONINTERLACED, 0 },
+- /* 640x480-90 */
+- { NULL, 90, 640, 480, 26392, 96, 32, 22, 1, 64, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 640x480-100 */
+- { NULL, 100, 640, 480, 23167, 104, 40, 25, 1, 64, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 640x480-60 */
+- { NULL, 60, 640, 480, 39682, 48, 16, 25, 10, 88, 2,
+- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+- FB_VMODE_NONINTERLACED, 0 },
+- /* 800x600-56 */
+- { NULL, 56, 800, 600, 27901, 128, 24, 22, 1, 72, 2,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 800x600-60 */
+- { NULL, 60, 800, 600, 25131, 72, 32, 23, 1, 136, 4,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 800x600-70 */
+- { NULL, 70, 800, 600, 21873, 120, 40, 21, 4, 80, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 800x600-72 */
+- { NULL, 72, 800, 600, 20052, 64, 56, 23, 37, 120, 6,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 800x600-75 */
+- { NULL, 75, 800, 600, 20202, 160, 16, 21, 1, 80, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 800x600-85 */
+- { NULL, 85, 800, 600, 17790, 152, 32, 27, 1, 64, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 800x600-90 */
+- { NULL, 90, 800, 600, 16648, 128, 40, 28, 1, 88, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 800x600-100 */
+- { NULL, 100, 800, 600, 14667, 136, 48, 27, 1, 88, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 800x600-60 */
+- { NULL, 60, 800, 600, 25131, 88, 40, 23, 1, 128, 4,
+- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+- FB_VMODE_NONINTERLACED, 0 },
+- /* 1024x768-60 */
+- { NULL, 60, 1024, 768, 15385, 160, 24, 29, 3, 136, 6,
+- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+- FB_VMODE_NONINTERLACED, 0 },
+- /* 1024x768-70 */
+- { NULL, 70, 1024, 768, 13346, 144, 24, 29, 3, 136, 6,
+- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+- FB_VMODE_NONINTERLACED, 0 },
+- /* 1024x768-72 */
+- { NULL, 72, 1024, 768, 12702, 168, 56, 29, 4, 112, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1024x768-75 */
+- { NULL, 75, 1024, 768, 12703, 176, 16, 28, 1, 96, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1024x768-85 */
+- { NULL, 85, 1024, 768, 10581, 208, 48, 36, 1, 96, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1024x768-90 */
+- { NULL, 90, 1024, 768, 9981, 176, 64, 37, 1, 112, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1024x768-100 */
+- { NULL, 100, 1024, 768, 8825, 184, 72, 42, 1, 112, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1024x768-60 */
+- { NULL, 60, 1024, 768, 15385, 160, 24, 29, 3, 136, 6,
+- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+- FB_VMODE_NONINTERLACED, 0 },
+- /* 1152x864-60 */
+- { NULL, 60, 1152, 864, 12251, 184, 64, 27, 1, 120, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1152x864-70 */
+- { NULL, 70, 1152, 864, 10254, 192, 72, 32, 8, 120, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1152x864-72 */
+- { NULL, 72, 1152, 864, 9866, 200, 72, 33, 7, 128, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1152x864-75 */
+- { NULL, 75, 1152, 864, 9259, 256, 64, 32, 1, 128, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1152x864-85 */
+- { NULL, 85, 1152, 864, 8357, 200, 72, 37, 3, 128, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1152x864-90 */
+- { NULL, 90, 1152, 864, 7719, 208, 80, 42, 9, 128, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1152x864-100 */
+- { NULL, 100, 1152, 864, 6947, 208, 80, 48, 3, 128, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1152x864-60 */
+- { NULL, 60, 1152, 864, 12251, 184, 64, 27, 1, 120, 3,
+- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+- FB_VMODE_NONINTERLACED, 0 },
+- /* 1280x1024-60 */
+- { NULL, 60, 1280, 1024, 9262, 248, 48, 38, 1, 112, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1280x1024-70 */
+- { NULL, 70, 1280, 1024, 7719, 224, 88, 38, 6, 136, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1280x1024-72 */
+- { NULL, 72, 1280, 1024, 7490, 224, 88, 39, 7, 136, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1280x1024-75 */
+- { NULL, 75, 1280, 1024, 7409, 248, 16, 38, 1, 144, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1280x1024-85 */
+- { NULL, 85, 1280, 1024, 6351, 224, 64, 44, 1, 160, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1280x1024-90 */
+- { NULL, 90, 1280, 1024, 5791, 240, 96, 51, 12, 144, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1280x1024-100 */
+- { NULL, 100, 1280, 1024, 5212, 240, 96, 57, 6, 144, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1280x1024-60 */
+- { NULL, 60, 1280, 1024, 9262, 248, 48, 38, 1, 112, 3,
+- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+- FB_VMODE_NONINTERLACED, 0 },
+- /* 1600x1200-60 */
++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++ /* 1600x1200-60 VESA */
+ { NULL, 60, 1600, 1200, 6172, 304, 64, 46, 1, 192, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1600x1200-70 */
+- { NULL, 70, 1600, 1200, 5291, 304, 64, 46, 1, 192, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1600x1200-72 */
+- { NULL, 72, 1600, 1200, 5053, 288, 112, 47, 13, 176, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1600x1200-75 */
++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++ /* 1600x1200-75 VESA */
+ { NULL, 75, 1600, 1200, 4938, 304, 64, 46, 1, 192, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1600x1200-85 */
++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++ /* 1600x1200-85 VESA */
+ { NULL, 85, 1600, 1200, 4357, 304, 64, 46, 1, 192, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1600x1200-90 */
+- { NULL, 90, 1600, 1200, 3981, 304, 128, 60, 1, 176, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1600x1200-100 */
+- { NULL, 100, 1600, 1200, 3563, 304, 128, 67, 1, 176, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1600x1200-60 */
+- { NULL, 60, 1600, 1200, 6172, 304, 64, 46, 1, 192, 3,
+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+- FB_VMODE_NONINTERLACED, 0 },
+- /* 1920x1440-60 */
+- { NULL, 60, 1920, 1440, 4273, 344, 128, 56, 1, 208, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1920x1440-70 */
+- { NULL, 70, 1920, 1440, 3593, 360, 152, 55, 8, 208, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1920x1440-72 */
+- { NULL, 72, 1920, 1440, 3472, 360, 152, 68, 4, 208, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1920x1440-75 */
+- { NULL, 75, 1920, 1440, 3367, 352, 144, 56, 1, 224, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1920x1440-85 */
+- { NULL, 85, 1920, 1440, 2929, 368, 152, 68, 1, 216, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++ /* 1200x900-75 - CRT timings for the OLPC mode */
++ { NULL, 75, 1200, 900, 8049, 104, 240, 29, 54, 136, 3,
++ 0, FB_VMODE_NONINTERLACED, 0 }
+ };
+
++#ifdef CONFIG_OLPC
++const struct fb_videomode olpc_dcon_modedb[] __initdata = {
++ /* The only mode the DCON has is 1200x900 */
++ { NULL, 50, 1200, 900, 17460, 24, 8, 4, 5, 8, 3,
++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++ FB_VMODE_NONINTERLACED, 0 }
++};
++#endif
++
+ static int lxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+ {
+ if (var->xres > 1920 || var->yres > 1440)
+@@ -379,16 +278,55 @@ static int __init lxfb_map_video_memory(
+ return 0;
+ }
+
++static int lxfb_set_gamma(struct fb_info *info, void * __user data)
++{
++ unsigned int gamma[LXFB_GAMMA_DWORDS];
++
++ if (copy_from_user(gamma, data, LXFB_GAMMA_SIZE))
++ return -EFAULT;
++
++ lx_set_gamma(info, gamma, LXFB_GAMMA_SIZE);
++ return 0;
++}
++
++static int lxfb_get_gamma(struct fb_info *info, void * __user data)
++{
++ unsigned int gamma[LXFB_GAMMA_DWORDS];
++ memset(gamma, 0, sizeof(gamma));
++
++ lx_get_gamma(info, gamma, LXFB_GAMMA_DWORDS);
++
++ return copy_to_user(data, gamma, LXFB_GAMMA_SIZE) ?
++ -EFAULT : 0;
++}
++
++static int lxfb_ioctl( struct fb_info *info, unsigned int cmd,
++ unsigned long arg)
++{
++ switch(cmd) {
++ case FBIOSGAMMA:
++ return lxfb_set_gamma(info, (void * __user) arg);
++
++ case FBIOGGAMMA:
++ return lxfb_get_gamma(info, (void * __user) arg);
++ }
++
++ return -ENOTTY;
++}
++
+ static struct fb_ops lxfb_ops = {
+ .owner = THIS_MODULE,
+ .fb_check_var = lxfb_check_var,
+ .fb_set_par = lxfb_set_par,
+ .fb_setcolreg = lxfb_setcolreg,
+ .fb_blank = lxfb_blank,
++ .fb_ioctl = lxfb_ioctl,
+ /* No HW acceleration for now. */
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
++ .fb_powerdown = lx_shutdown,
++ .fb_powerup = lx_powerup,
+ };
+
+ static struct fb_info * __init lxfb_init_fbinfo(struct device *dev)
+@@ -431,6 +369,45 @@ static struct fb_info * __init lxfb_init
+ return info;
+ }
+
++#ifdef CONFIG_PM
++
++static int lxfb_suspend(struct pci_dev *pdev, pm_message_t state)
++{
++ struct fb_info *info = pci_get_drvdata(pdev);
++
++ if (pdev->dev.power.power_state.event == state.event)
++ return 0;
++
++ if (state.event == PM_EVENT_SUSPEND) {
++
++ acquire_console_sem();
++ lx_shutdown(info);
++ fb_set_suspend(info, 1);
++ release_console_sem();
++ }
++
++ pdev->dev.power.power_state = state;
++ return 0;
++}
++
++static int lxfb_resume(struct pci_dev *pdev)
++{
++ struct fb_info *info = pci_get_drvdata(pdev);
++
++ acquire_console_sem();
++
++ /* Turn the engine completely on */
++
++ lx_powerup(info);
++ fb_set_suspend(info, 0);
++ release_console_sem();
++
++ pdev->dev.power.power_state = PMSG_ON;
++ return 0;
++}
++
++#endif
++
+ static int __init lxfb_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+ {
+@@ -467,6 +444,13 @@ static int __init lxfb_probe(struct pci_
+ modedb_ptr = (struct fb_videomode *) geode_modedb;
+ modedb_size = ARRAY_SIZE(geode_modedb);
+
++#ifdef CONFIG_OLPC
++ if (olpc_has_dcon()) {
++ modedb_ptr = (struct fb_videomode *) olpc_dcon_modedb;
++ modedb_size = ARRAY_SIZE(olpc_dcon_modedb);
++ }
++#endif
++
+ ret = fb_find_mode(&info->var, info, mode_option,
+ modedb_ptr, modedb_size, NULL, 16);
+
+@@ -556,6 +540,10 @@ static struct pci_driver lxfb_driver = {
+ .id_table = lxfb_id_table,
+ .probe = lxfb_probe,
+ .remove = lxfb_remove,
++#ifdef CONFIG_PM
++ .suspend = lxfb_suspend,
++ .resume = lxfb_resume
++#endif
+ };
+
+ #ifndef MODULE
+Index: linux-2.6.23.17/drivers/video/geode/lxfb_ops.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/video/geode/lxfb_ops.c
++++ linux-2.6.23.17/drivers/video/geode/lxfb_ops.c
+@@ -13,9 +13,13 @@
+ #include <linux/fb.h>
+ #include <linux/uaccess.h>
+ #include <linux/delay.h>
++#include <asm/olpc.h>
+
+ #include "lxfb.h"
+
++#define _GEODELX_
++#include "geode_regs.h"
++
+ /* TODO
+ * Support panel scaling
+ * Add acceleration
+@@ -290,6 +294,19 @@ unsigned int lx_framebuffer_size(void)
+ {
+ unsigned int val;
+
++#ifdef CONFIG_OLPC
++ if (machine_is_olpc() && !olpc_has_vsa()) {
++ u32 hi,lo;
++ rdmsr(MSR_LX_GLIU0_P2D_RO0, lo, hi);
++
++ /* Top page number */
++ val = ((hi & 0xff) << 12) | ((lo & 0xfff00000) >> 20);
++ val -= (lo & 0x000fffff); /* Subtract bottom page number */
++ val += 1; /* Adjust page count */
++ return (val << 12);
++ }
++#endif
++
+ /* The frame buffer size is reported by a VSM in VSA II */
+ /* Virtual Register Class = 0x02 */
+ /* VG_MEM_SIZE (1MB units) = 0x00 */
+@@ -301,6 +318,34 @@ unsigned int lx_framebuffer_size(void)
+ return (val << 20);
+ }
+
++void lx_set_gamma(struct fb_info *info, unsigned int *gamma, int len)
++{
++ int i;
++ struct lxfb_par *par = info->par;
++
++ writel(0, par->df_regs + DF_PAR);
++
++ /* Sequential writes to the data register will increment the
++ address automatically */
++
++ for(i = 0; i < len; i++)
++ writel(gamma[i] & 0xFFFFFF, par->df_regs + DF_PDR);
++
++ writel(readl(par->df_regs + DF_MISC) & ~DF_MISC_GAM_BYPASS,
++ par->df_regs + DF_MISC);
++}
++
++void lx_get_gamma(struct fb_info *info, unsigned int *gamma, int len)
++{
++ int i;
++ struct lxfb_par *par = info->par;
++
++ writel(0, par->df_regs + DF_PAR);
++
++ for(i = 0; i < len;i++)
++ gamma[i] = readl(par->df_regs + DF_PDR);
++}
++
+ void lx_set_mode(struct fb_info *info)
+ {
+ struct lxfb_par *par = info->par;
+@@ -313,6 +358,7 @@ void lx_set_mode(struct fb_info *info)
+ int vactive, vblankstart, vsyncstart, vsyncend, vblankend, vtotal;
+
+ /* Unlock the DC registers */
++ readl(par->dc_regs + DC_UNLOCK);
+ writel(DC_UNLOCK_CODE, par->dc_regs + DC_UNLOCK);
+
+ lx_graphics_disable(info);
+@@ -534,3 +580,285 @@ int lx_blank_display(struct fb_info *inf
+
+ return 0;
+ }
++
++static struct geoderegs saved_regs;
++
++static void lx_save_regs(struct fb_info *info, struct geoderegs *regs)
++{
++ struct lxfb_par *par = info->par;
++ int i;
++
++ /* Wait for the command buffer to empty */
++ while(!(readl(par->gp_regs + 0x44) & (1 << 4)));
++
++ rdmsrl(MSR_LX_DF_PADSEL, regs->msr.padsel);
++ rdmsrl(MSR_LX_GLCP_DOTPLL, regs->msr.dotpll);
++ rdmsrl(MSR_LX_DF_GLCONFIG, regs->msr.dfglcfg);
++ rdmsrl(MSR_LX_DC_SPARE, regs->msr.dcspare);
++
++ writel(0x4758, par->dc_regs + 0x00);
++
++ memcpy(regs->gp.b, par->gp_regs, GP_REG_SIZE);
++ memcpy(regs->dc.b, par->dc_regs, DC_REG_SIZE);
++ memcpy(regs->vp.b, par->df_regs, VP_REG_SIZE);
++ memcpy(regs->fp.b, par->df_regs + VP_FP_START, FP_REG_SIZE);
++
++ /* Save the palettes */
++ writel(0, par->dc_regs + 0x70);
++
++ for(i = 0; i < DC_PAL_SIZE; i++)
++ regs->pal[i] = readl(par->dc_regs + 0x74);
++
++ writel(0, par->df_regs + 0x38);
++
++ for(i = 0; i <= 0xFF; i++)
++ regs->gamma[i] = readl(par->df_regs + 0x40);
++}
++
++static void lx_restore_regs(struct fb_info *info, struct geoderegs *regs)
++{
++ struct lxfb_par *par = info->par;
++ u32 val, i;
++
++ /* == DOTPLL == */
++
++ lx_set_dotpll((u32) (regs->msr.dotpll >> 32));
++
++ /* MSRs */
++
++ wrmsrl(MSR_LX_DF_GLCONFIG, regs->msr.dfglcfg);
++
++ /* == GP == */
++
++ writel(regs->gp.r.dst_offset, par->gp_regs + 0x00);
++ writel(regs->gp.r.src_offset, par->gp_regs + 0x04);
++ writel(regs->gp.r.stride, par->gp_regs + 0x08);
++ writel(regs->gp.r.wid_height, par->gp_regs + 0x0C);
++ writel(regs->gp.r.src_color_fg, par->gp_regs + 0x10);
++ writel(regs->gp.r.src_color_bg, par->gp_regs + 0x14);
++ writel(regs->gp.r.pat_color_0, par->gp_regs + 0x18);
++ writel(regs->gp.r.pat_color_1, par->gp_regs + 0x1C);
++ writel(regs->gp.r.pat_color_2, par->gp_regs + 0x20);
++ writel(regs->gp.r.pat_color_3, par->gp_regs + 0x24);
++ writel(regs->gp.r.pat_color_4, par->gp_regs + 0x28);
++ writel(regs->gp.r.pat_color_5, par->gp_regs + 0x2C);
++ writel(regs->gp.r.pat_data_0, par->gp_regs + 0x30);
++ writel(regs->gp.r.pat_data_1, par->gp_regs + 0x34);
++
++ /* Writing to these registers would cause a blt to happen */
++ /* 0x38, 0x3c, 0x40 */
++
++ /* Status register (0x44) is read only */
++
++ writel(regs->gp.r.hst_src, par->gp_regs + 0x48);
++ writel(regs->gp.r.base_offset, par->gp_regs + 0x4c);
++ writel(regs->gp.r.cmd_top, par->gp_regs + 0x50);
++ writel(regs->gp.r.cmd_bot, par->gp_regs + 0x54);
++ writel(regs->gp.r.cmd_read, par->gp_regs + 0x58);
++ writel(regs->gp.r.cmd_write, par->gp_regs + 0x5C);
++ writel(regs->gp.r.ch3_offset, par->gp_regs + 0x60);
++ writel(regs->gp.r.ch3_mode_str, par->gp_regs + 0x64);
++ writel(regs->gp.r.ch3_width, par->gp_regs + 0x6C);
++ writel(regs->gp.r.ch3_hsrc, par->gp_regs + 0x70);
++
++ /* FIXME: Restore the LUT data here */
++
++ writel(regs->gp.r.int_cntrl, par->gp_regs + 0x70);
++
++ /* == DC == */
++
++ /* Write the unlock value */
++ writel(0x4758, par->dc_regs + 0x00);
++
++ /* Write the palette data first */
++
++ writel(0, par->dc_regs + 0x70);
++
++ for(i = 0; i < DC_PAL_SIZE; i++)
++ writel(regs->pal[i], par->dc_regs + 0x74);
++
++ /* MSRs */
++ wrmsrl(MSR_LX_DC_SPARE, regs->msr.dcspare);
++
++ /* Write the gcfg register without the enables */
++ writel(regs->dc.r.gcfg & ~0x0F, par->dc_regs + 0x04);
++
++ /* Write the vcfg register without the enables */
++ writel(regs->dc.r.dcfg & ~0x19, par->dc_regs + 0x08);
++
++ /* Write the rest of the active registers */
++ writel(regs->dc.r.arb, par->dc_regs + 0x0C);
++ writel(regs->dc.r.fb_st_offset, par->dc_regs + 0x10);
++ writel(regs->dc.r.cb_st_offset, par->dc_regs + 0x14);
++ writel(regs->dc.r.curs_st_offset, par->dc_regs + 0x18);
++ writel(regs->dc.r.icon_st_offset, par->dc_regs + 0x1C);
++ writel(regs->dc.r.vid_y_st_offset, par->dc_regs + 0x20);
++ writel(regs->dc.r.vid_u_st_offset, par->dc_regs + 0x24);
++ writel(regs->dc.r.vid_v_st_offset, par->dc_regs + 0x28);
++ writel(regs->dc.r.dctop, par->dc_regs + 0x2c);
++ writel(regs->dc.r.line_size, par->dc_regs + 0x30);
++ writel(regs->dc.r.gfx_pitch, par->dc_regs + 0x34);
++ writel(regs->dc.r.vid_yuv_pitch, par->dc_regs + 0x38);
++ writel(regs->dc.r.h_active_timing, par->dc_regs + 0x40);
++ writel(regs->dc.r.h_blank_timing, par->dc_regs + 0x44);
++ writel(regs->dc.r.h_sync_timing, par->dc_regs + 0x48);
++ writel(regs->dc.r.v_active_timing, par->dc_regs + 0x50);
++ writel(regs->dc.r.v_blank_timing, par->dc_regs + 0x54);
++ writel(regs->dc.r.v_sync_timing, par->dc_regs + 0x58);
++ writel(regs->dc.r.fbactive, par->dc_regs + 0x5c);
++ writel(regs->dc.r.dc_cursor_x, par->dc_regs + 0x60);
++ writel(regs->dc.r.dc_cursor_y, par->dc_regs + 0x64);
++ writel(regs->dc.r.dc_icon_x, par->dc_regs + 0x68);
++
++ /* Skip register 0x6C (line_cnt), 0x70/0x74 (palette),
++ 0x78 (diagnostic), and 0x7c (diagnostic)
++ */
++
++ writel(regs->dc.r.dc_vid_ds_delta, par->dc_regs + 0x80);
++ writel(regs->dc.r.gliu0_mem_offset, par->dc_regs + 0x84);
++ writel(regs->dc.r.dv_ctl, par->dc_regs + 0x88);
++ writel(regs->dc.r.dv_acc, par->dc_regs + 0x8C);
++
++ writel(regs->dc.r.gfx_scale, par->dc_regs + 0x90);
++ writel(regs->dc.r.irq_filt_ctl, par->dc_regs + 0x94);
++ writel(regs->dc.r.filt_coeff1, par->dc_regs + 0x98);
++ writel(regs->dc.r.filt_coeff2, par->dc_regs + 0x9C);
++ writel(regs->dc.r.vbi_event_ctl, par->dc_regs + 0xA0);
++
++ writel(regs->dc.r.vbi_odd_ctl, par->dc_regs + 0xA4);
++ writel(regs->dc.r.vbi_hor, par->dc_regs + 0xA8);
++ writel(regs->dc.r.vbi_ln_odd, par->dc_regs + 0xAC);
++ writel(regs->dc.r.vbi_ln_event, par->dc_regs + 0xB0);
++ writel(regs->dc.r.vbi_pitch, par->dc_regs + 0xB4);
++ writel(regs->dc.r.clr_key, par->dc_regs + 0xB8);
++ writel(regs->dc.r.clr_key_mask, par->dc_regs + 0xBC);
++
++ writel(regs->dc.r.clr_key_x, par->dc_regs + 0xC0);
++ writel(regs->dc.r.clr_key_y, par->dc_regs + 0xC4);
++ writel(regs->dc.r.irq, par->dc_regs + 0xC8);
++ writel(regs->dc.r.genlk_ctrl, par->dc_regs + 0xD4);
++
++ writel(regs->dc.r.vid_even_y_st_offset, par->dc_regs + 0xD8);
++ writel(regs->dc.r.vid_even_u_st_offset, par->dc_regs + 0xDC);
++ writel(regs->dc.r.vid_even_v_st_offset, par->dc_regs + 0xE0);
++
++ writel(regs->dc.r.v_active_even_timing, par->dc_regs + 0xE4);
++ writel(regs->dc.r.v_blank_even_timing, par->dc_regs + 0xE8);
++ writel(regs->dc.r.v_sync_even_timing, par->dc_regs + 0xEC);
++
++ /* == VP == */
++
++ /* MSR */
++ wrmsrl(MSR_LX_DF_PADSEL, regs->msr.padsel);
++
++ /* Write gamma information first */
++
++ writel(0, par->df_regs + 0x38);
++
++ for(i = 0; i <= 0xFF; i++)
++ writel((u32) regs->gamma[i], par->df_regs + 0x40);
++
++ /* Don't enable video yet */
++ writel((u32) regs->vp.r.vcfg & ~0x01, par->df_regs + 0x00);
++
++ /* Don't enable the CRT yet */
++ writel((u32) regs->vp.r.dcfg & ~0x0F, par->df_regs + 0x08);
++
++ /* Write the rest of the VP registers */
++
++ writel((u32) regs->vp.r.vx, par->df_regs + 0x10);
++ writel((u32) regs->vp.r.vy, par->df_regs + 0x18);
++ writel((u32) regs->vp.r.vs, par->df_regs + 0x20);
++ writel((u32) regs->vp.r.vck, par->df_regs + 0x28);
++ writel((u32) regs->vp.r.vcm, par->df_regs + 0x30);
++ writel((u32) regs->vp.r.misc, par->df_regs + 0x50);
++ writel((u32) regs->vp.r.ccs, par->df_regs + 0x58);
++ writel((u32) regs->vp.r.vdc, par->df_regs + 0x78);
++ writel((u32) regs->vp.r.vco, par->df_regs + 0x80);
++ writel((u32) regs->vp.r.crc, par->df_regs + 0x88);
++ writel((u32) regs->vp.r.vde, par->df_regs + 0x98);
++ writel((u32) regs->vp.r.cck, par->df_regs + 0xA0);
++ writel((u32) regs->vp.r.ccm, par->df_regs + 0xA8);
++ writel((u32) regs->vp.r.cc1, par->df_regs + 0xB0);
++ writel((u32) regs->vp.r.cc2, par->df_regs + 0xB8);
++ writel((u32) regs->vp.r.a1x, par->df_regs + 0xC0);
++ writel((u32) regs->vp.r.a1y, par->df_regs + 0xC8);
++ writel((u32) regs->vp.r.a1c, par->df_regs + 0xD0);
++ writel((u32) regs->vp.r.a1t, par->df_regs + 0xD8);
++ writel((u32) regs->vp.r.a2x, par->df_regs + 0xE0);
++ writel((u32) regs->vp.r.a2y, par->df_regs + 0xE8);
++ writel((u32) regs->vp.r.a2c, par->df_regs + 0xF0);
++ writel((u32) regs->vp.r.a2t, par->df_regs + 0xF8);
++ writel((u32) regs->vp.r.a3x, par->df_regs + 0x100);
++ writel((u32) regs->vp.r.a3y, par->df_regs + 0x108);
++ writel((u32) regs->vp.r.a3c, par->df_regs + 0x110);
++ writel((u32) regs->vp.r.a3t, par->df_regs + 0x118);
++ writel((u32) regs->vp.r.vrr, par->df_regs + 0x120);
++
++ writel((u32) regs->vp.r.vye, par->df_regs + 0x138);
++ writel((u32) regs->vp.r.a1ye, par->df_regs + 0x140);
++ writel((u32) regs->vp.r.a2ye, par->df_regs + 0x148);
++ writel((u32) regs->vp.r.a3ye, par->df_regs + 0x150);
++
++ /* == FP == */
++
++ writel((u32) regs->fp.r.pt1, par->df_regs + 0x400);
++ writel((u32) regs->fp.r.pt2, par->df_regs + 0x408);
++ writel((u32) regs->fp.r.dfc, par->df_regs + 0x418);
++ writel(regs->fp.r.dca, par->df_regs + 0x448);
++ writel(regs->fp.r.dmd, par->df_regs + 0x450);
++ writel(regs->fp.r.crc, par->df_regs + 0x458);
++
++ /* Final enables */
++
++ val = readl(par->df_regs + 0x410);
++
++ /* Control the panel */
++ if (regs->fp.r.pm & (1 << 24)) {
++
++ if (!(val & 0x09))
++ writel(regs->fp.r.pm, par->df_regs + 0x410);
++ }
++ else {
++ if (!(val & 0x05))
++ writel(regs->fp.r.pm, par->df_regs + 0x410);
++ }
++
++ /* Turn everything on */
++
++ writel(regs->dc.r.gcfg, par->dc_regs + 0x04);
++ writel((u32) regs->vp.r.vcfg, par->df_regs + 0x00);
++ writel((u32) regs->vp.r.dcfg, par->df_regs + 0x08);
++ writel(regs->dc.r.dcfg, par->dc_regs + 0x08);
++}
++
++static int lx_power_on = 1;
++
++int lx_shutdown(struct fb_info *info)
++{
++ struct lxfb_par *par = info->par;
++
++ if (lx_power_on == 0)
++ return 0;
++
++ writel(DC_UNLOCK_CODE, par->dc_regs + DC_UNLOCK);
++ lx_save_regs(info, &saved_regs);
++ lx_graphics_disable(info);
++
++ lx_power_on = 0;
++ return 0;
++}
++
++int lx_powerup(struct fb_info *info)
++{
++ struct lxfb_par *par = info->par;
++
++ if (lx_power_on == 1)
++ return 0;
++
++ lx_restore_regs(info, &saved_regs);
++ writel(0, par->dc_regs + DC_UNLOCK);
++
++ lx_power_on = 1;
++ return 0;
++}
+Index: linux-2.6.23.17/drivers/video/geode/video_gx.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/video/geode/video_gx.c
++++ linux-2.6.23.17/drivers/video/geode/video_gx.c
+@@ -16,10 +16,14 @@
+ #include <asm/io.h>
+ #include <asm/delay.h>
+ #include <asm/msr.h>
++#include <asm/olpc.h>
+
+ #include "geodefb.h"
+ #include "video_gx.h"
++#include "display_gx.h"
+
++/* This structure is used to store the saved registers during suspend */
++static struct geoderegs gx_saved_regs;
+
+ /*
+ * Tables of register settings for various DOTCLKs.
+@@ -58,7 +62,7 @@ static const struct gx_pll_entry gx_pll_
+ { 13888, POSTDIV3, 0x000007E1 }, /* 72.0000 */
+ { 13426, PREMULT2, 0x00000F4A }, /* 74.4810 */
+ { 13333, 0, 0x00000052 }, /* 75.0000 */
+- { 12698, 0, 0x00000056 }, /* 78.7500 */
++ { 12698, 0, 0x00000056 }, /* 78.7500 */
+ { 12500, POSTDIV3|PREMULT2, 0x00000709 }, /* 80.0000 */
+ { 11135, PREMULT2, 0x00000262 }, /* 89.8000 */
+ { 10582, 0, 0x000002D2 }, /* 94.5000 */
+@@ -117,8 +121,9 @@ static const struct gx_pll_entry gx_pll_
+ { 4357, 0, 0x0000057D }, /* 229.5000 */
+ };
+
+-static void gx_set_dclk_frequency(struct fb_info *info)
++void gx_set_dclk_frequency(struct fb_info *info)
+ {
++ struct geodefb_par *par = info->par;
+ const struct gx_pll_entry *pll_table;
+ int pll_table_len;
+ int i, best_i;
+@@ -173,115 +178,169 @@ static void gx_set_dclk_frequency(struct
+ do {
+ rdmsrl(MSR_GLCP_DOTPLL, dotpll);
+ } while (timeout-- && !(dotpll & MSR_GLCP_DOTPLL_LOCK));
++
++ par->curdclk = pll_table[best_i].dotpll_value;
+ }
+
+-static void
+-gx_configure_tft(struct fb_info *info)
++/* Find out the current clock - we will use this information to avoid
++ re-programming it if we don't need to */
++
++unsigned int gx_get_dclk(struct fb_info *info)
+ {
+- struct geodefb_par *par = info->par;
+- unsigned long val;
+- unsigned long fp;
++ const struct gx_pll_entry *pll_table;
++ int pll_table_len;
++ u64 dotpll;
++ int i;
+
+- /* Set up the DF pad select MSR */
++ if (cpu_data->x86_mask == 1) {
++ pll_table = gx_pll_table_14MHz;
++ pll_table_len = ARRAY_SIZE(gx_pll_table_14MHz);
++ } else {
++ pll_table = gx_pll_table_48MHz;
++ pll_table_len = ARRAY_SIZE(gx_pll_table_48MHz);
++ }
+
+- rdmsrl(GX_VP_MSR_PAD_SELECT, val);
+- val &= ~GX_VP_PAD_SELECT_MASK;
+- val |= GX_VP_PAD_SELECT_TFT;
+- wrmsrl(GX_VP_MSR_PAD_SELECT, val);
++ rdmsrl(MSR_GLCP_DOTPLL, dotpll);
+
+- /* Turn off the panel */
++ for(i = 0; i < pll_table_len; i++) {
++ if (pll_table[i].dotpll_value == (u32) (dotpll >> 32))
++ break;
++ }
++
++ return (i == pll_table_len) ? 0 : pll_table[i].pixclock;
++}
+
+- fp = readl(par->vid_regs + GX_FP_PM);
+- fp &= ~GX_FP_PM_P;
+- writel(fp, par->vid_regs + GX_FP_PM);
+
+- /* Set timing 1 */
++#define CMP(val, mask, res) (((val) & (mask)) == (res))
+
+- fp = readl(par->vid_regs + GX_FP_PT1);
+- fp &= GX_FP_PT1_VSIZE_MASK;
+- fp |= info->var.yres << GX_FP_PT1_VSIZE_SHIFT;
+- writel(fp, par->vid_regs + GX_FP_PT1);
++static void
++gx_configure_tft(struct fb_info *info) {
+
+- /* Timing 2 */
+- /* Set bits that are always on for TFT */
++ struct geodefb_par *par = info->par;
++ u32 val, fp = 0, fp1, fp2, sync = 0;
+
+- fp = 0x0F100000;
++ /* Set up the DF pad select MSR */
+
+- /* Add sync polarity */
++ rdmsrl(GX_VP_MSR_PAD_SELECT, val);
++
++ if ((val & GX_VP_PAD_SELECT_MASK) != GX_VP_PAD_SELECT_TFT) {
++ val &= ~GX_VP_PAD_SELECT_MASK;
++ val |= GX_VP_PAD_SELECT_TFT;
++ wrmsrl(GX_VP_MSR_PAD_SELECT, val);
++ }
+
+ if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
+- fp |= GX_FP_PT2_VSP;
++ sync |= GX_FP_PT2_VSP;
+
+ if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
+- fp |= GX_FP_PT2_HSP;
++ sync |= GX_FP_PT2_HSP;
+
+- writel(fp, par->vid_regs + GX_FP_PT2);
++ /* We only need to turn off the panel if something changed */
+
+- /* Set the dither control */
+- writel(0x70, par->vid_regs + GX_FP_DFC);
++ fp1 = readl(par->vid_regs + GX_FP_PT1);
++ fp2 = readl(par->vid_regs + GX_FP_PT2);
++
++ if (!CMP(fp1, GX_FP_PT1_VSIZE_MASK, info->var.yres << GX_FP_PT1_VSIZE_SHIFT) ||
++ (fp2 != (0x0F100000 | sync))) {
++
++ /* Turn off the panel */
++
++#ifdef NOTUSED
++ /* Do we really need to turn off the panel? */
++ /* Possibly - we have a glitch somewhere */
+
+- /* Enable the FP data and power (in case the BIOS didn't) */
++ fp = readl(par->vid_regs + GX_FP_PM);
++ fp &= ~GX_FP_PM_P;
++ writel(fp, par->vid_regs + GX_FP_PM);
++#endif
+
+- fp = readl(par->vid_regs + GX_DCFG);
+- fp |= GX_DCFG_FP_PWR_EN | GX_DCFG_FP_DATA_EN;
+- writel(fp, par->vid_regs + GX_DCFG);
++ /* Timing 1 */
++ fp1 &= GX_FP_PT1_VSIZE_MASK;
++ fp1 |= info->var.yres << GX_FP_PT1_VSIZE_SHIFT;
++ writel(fp, par->vid_regs + GX_FP_PT1);
+
+- /* Unblank the panel */
++ /* Timing 2 */
++ writel(0x0F100000 | sync, par->vid_regs + GX_FP_PT2);
++ }
++
++ /* Set the dither control */
++ if (readl(par->vid_regs + GX_FP_DFC) != 0x70) {
++ writel(0x70, par->vid_regs + GX_FP_DFC);
++ }
++
++ /* Turn on the panel */
+
+ fp = readl(par->vid_regs + GX_FP_PM);
+- fp |= GX_FP_PM_P;
+- writel(fp, par->vid_regs + GX_FP_PM);
++
++ if (!(fp & 0x09))
++ writel(fp | GX_FP_PM_P, par->vid_regs + GX_FP_PM);
+ }
+
++#define DCFG_DEFAULT_VAL GX_DCFG_CRT_SYNC_SKW_DFLT | GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN | \
++GX_DCFG_CRT_EN | GX_DCFG_DAC_BL_EN
++
+ static void gx_configure_display(struct fb_info *info)
+ {
+ struct geodefb_par *par = info->par;
+- u32 dcfg, misc;
++ u32 dcfg, misc, sync = 0;
+
+ /* Set up the MISC register */
+-
+ misc = readl(par->vid_regs + GX_MISC);
+
+- /* Power up the DAC */
+- misc &= ~(GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN);
++ /* We leave gamma enabled if it was already enabled.
++ Although the hardware enables it without setting
++ up the gamma table, the BIOS or bootloader ought
++ to have either disabled it or loaded a table by now */
+
+- /* Disable gamma correction */
+- misc |= GX_MISC_GAM_EN;
+
+- writel(misc, par->vid_regs + GX_MISC);
+
+- /* Write the display configuration */
+- dcfg = readl(par->vid_regs + GX_DCFG);
++ if (par->enable_crt) {
++ /* Power up the CRT DACs */
++ if (misc & ( GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN)) {
++ misc &= ~(GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN);
++ writel(misc, par->vid_regs + GX_MISC);
++ }
+
+- /* Disable hsync and vsync */
+- dcfg &= ~(GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN);
+- writel(dcfg, par->vid_regs + GX_DCFG);
++ if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
++ sync |= GX_DCFG_CRT_HSYNC_POL;
+
+- /* Clear bits from existing mode. */
+- dcfg &= ~(GX_DCFG_CRT_SYNC_SKW_MASK
+- | GX_DCFG_CRT_HSYNC_POL | GX_DCFG_CRT_VSYNC_POL
+- | GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN);
++ if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
++ sync |= GX_DCFG_CRT_VSYNC_POL;
++ }
++ else {
++ /* Turn off the CRT DACs in FP mode - we don't need them */
++ if ((misc & (GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN))) {
++ misc |= (GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN);
++ writel(misc, par->vid_regs + GX_MISC);
++ }
++ }
+
+- /* Set default sync skew. */
+- dcfg |= GX_DCFG_CRT_SYNC_SKW_DFLT;
++ /* Write the display configuration */
++ dcfg = readl(par->vid_regs + GX_DCFG);
+
+- /* Enable hsync and vsync. */
+- dcfg |= GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN;
++ if (!CMP(dcfg, DCFG_DEFAULT_VAL | GX_DCFG_CRT_HSYNC_POL | GX_DCFG_CRT_VSYNC_POL,
++ DCFG_DEFAULT_VAL | sync)) {
+
+- /* Sync polarities. */
+- if (info->var.sync & FB_SYNC_HOR_HIGH_ACT)
+- dcfg |= GX_DCFG_CRT_HSYNC_POL;
+- if (info->var.sync & FB_SYNC_VERT_HIGH_ACT)
+- dcfg |= GX_DCFG_CRT_VSYNC_POL;
++ /* Disable hsync and vsync */
++ dcfg &= ~(GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN);
++ writel(dcfg, par->vid_regs + GX_DCFG);
+
+- /* Enable the display logic */
+- /* Set up the DACS to blank normally */
++ /* Clear bits from existing mode. */
++ dcfg &= ~(GX_DCFG_CRT_SYNC_SKW_MASK
++ | GX_DCFG_CRT_HSYNC_POL | GX_DCFG_CRT_VSYNC_POL
++ | GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN);
+
+- dcfg |= GX_DCFG_CRT_EN | GX_DCFG_DAC_BL_EN;
++ /* Set default sync skew. */
++ dcfg |= GX_DCFG_CRT_SYNC_SKW_DFLT;
+
+- /* Enable the external DAC VREF? */
++ /* Enable hsync and vsync. */
++ dcfg |= GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN;
+
+- writel(dcfg, par->vid_regs + GX_DCFG);
++ /* Enable the display logic */
++ dcfg |= GX_DCFG_CRT_EN | GX_DCFG_DAC_BL_EN;
++
++ writel(dcfg, par->vid_regs + GX_DCFG);
++ }
+
+ /* Set up the flat panel (if it is enabled) */
+
+@@ -289,6 +348,100 @@ static void gx_configure_display(struct
+ gx_configure_tft(info);
+ }
+
++int gxfb_powerdown(struct fb_info *info)
++{
++ struct geodefb_par *par = info->par;
++
++ /* We're already suspended */
++
++ if (par->state != FB_POWER_STATE_ON)
++ return 0;
++
++ /* Save the registers */
++ gx_save_regs(info, &gx_saved_regs);
++
++ /* Shut down the engine */
++
++ writel(gx_saved_regs.vp.r.vcfg & ~0x01, par->vid_regs + GX_VCFG);
++ writel(gx_saved_regs.vp.r.dcfg & ~0x0F, par->vid_regs + GX_DCFG);
++
++ /* Turn off the flat panel unless we are attached to a DCON */
++ if (!olpc_has_dcon())
++ writel(gx_saved_regs.fp.r.pm & ~GX_FP_PM_P, par->vid_regs + GX_FP_PM);
++
++ writel(0x4758, par->dc_regs + DC_UNLOCK);
++
++ writel(gx_saved_regs.dc.r.gcfg & ~0x0F,
++ par->dc_regs + DC_GENERAL_CFG);
++
++ writel(gx_saved_regs.dc.r.dcfg & ~0x19,
++ par->dc_regs + DC_DISPLAY_CFG);
++
++ par->state = FB_POWER_STATE_SUSPEND;
++
++ return 0;
++}
++
++int gxfb_powerup(struct fb_info *info)
++{
++ struct geodefb_par *par = info->par;
++ u32 val;
++
++ if (par->state == FB_POWER_STATE_SUSPEND) {
++
++ writel(gx_saved_regs.dc.r.dcfg,
++ par->dc_regs + DC_DISPLAY_CFG);
++
++ writel(gx_saved_regs.vp.r.vcfg, par->vid_regs + GX_VCFG);
++ writel(gx_saved_regs.vp.r.dcfg, par->vid_regs + GX_DCFG);
++
++ val = readl(par->vid_regs + GX_FP_PM);
++
++ /* power up the panel if it needs it; we don't always power it down */
++ if (!(val & 0x09)) {
++ writel(gx_saved_regs.fp.r.pm, par->vid_regs + GX_FP_PM);
++ mdelay(64);
++ }
++ }
++
++ /* If the panel is currently on its way up, then wait up to 100ms
++ for it */
++
++ if (readl(par->vid_regs + GX_FP_PM) & 0x08) {
++ int i;
++
++ for(i = 0; i < 10; i++) {
++ if (readl(par->vid_regs + GX_FP_PM) & 0x01)
++ break;
++
++ mdelay(10);
++ }
++
++ if (i == 10)
++ printk(KERN_ERR "gxfb: Panel power up timed out\n");
++ }
++
++ if (par->state == FB_POWER_STATE_ON)
++ return 0;
++
++ switch(par->state) {
++ case FB_POWER_STATE_OFF:
++ gx_restore_regs(info, &gx_saved_regs);
++ break;
++
++ case FB_POWER_STATE_SUSPEND:
++ /* Do this because it will turn on the FIFO which will
++ start the line count */
++ writel(gx_saved_regs.dc.r.gcfg,
++ par->dc_regs + DC_GENERAL_CFG);
++ writel(0x0, par->dc_regs + DC_UNLOCK);
++ break;
++ }
++
++ par->state = FB_POWER_STATE_ON;
++ return 0;
++}
++
+ static int gx_blank_display(struct fb_info *info, int blank_mode)
+ {
+ struct geodefb_par *par = info->par;
+@@ -315,6 +468,7 @@ static int gx_blank_display(struct fb_in
+ default:
+ return -EINVAL;
+ }
++
+ dcfg = readl(par->vid_regs + GX_DCFG);
+ dcfg &= ~(GX_DCFG_DAC_BL_EN
+ | GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN);
+@@ -326,7 +480,7 @@ static int gx_blank_display(struct fb_in
+ dcfg |= GX_DCFG_VSYNC_EN;
+ writel(dcfg, par->vid_regs + GX_DCFG);
+
+- /* Power on/off flat panel. */
++ /* Power on/off flat panel */
+
+ if (par->enable_crt == 0) {
+ fp_pm = readl(par->vid_regs + GX_FP_PM);
+@@ -340,8 +494,37 @@ static int gx_blank_display(struct fb_in
+ return 0;
+ }
+
++extern struct fb_info *gxfb_info;
++
++/* This function controls the flatpanel power sequencing - this is used
++ by the OLPC power management engine to enable the FP sequencing much
++ earlier in the resume process
++*/
++
++void gxfb_flatpanel_control(int state)
++{
++ struct geodefb_par *par = gxfb_info->par;
++ u32 val, fp = readl(par->vid_regs + GX_FP_PM);
++ val = fp;
++
++ /* Turn on the panel if it isn't aleady */
++
++ if (state) {
++ if (!(val & 0x01))
++ val |= GX_FP_PM_P;
++ }
++ else {
++ if (!(val & 0x02))
++ val &= ~GX_FP_PM_P;
++ }
++
++ if (val != fp)
++ writel(val, par->vid_regs + GX_FP_PM);
++}
++
+ struct geode_vid_ops gx_vid_ops = {
+ .set_dclk = gx_set_dclk_frequency,
++ .get_dclk = gx_get_dclk,
+ .configure_display = gx_configure_display,
+ .blank_display = gx_blank_display,
+ };
+Index: linux-2.6.23.17/drivers/video/geode/video_gx.h
+===================================================================
+--- linux-2.6.23.17.orig/drivers/video/geode/video_gx.h
++++ linux-2.6.23.17/drivers/video/geode/video_gx.h
+@@ -11,6 +11,8 @@
+ #ifndef __VIDEO_GX_H__
+ #define __VIDEO_GX_H__
+
++#include "geode_regs.h"
++
+ extern struct geode_vid_ops gx_vid_ops;
+
+ /* GX Flatpanel control MSR */
+@@ -20,6 +22,8 @@ extern struct geode_vid_ops gx_vid_ops;
+
+ /* Geode GX video processor registers */
+
++#define GX_VCFG 0x0000
++
+ #define GX_DCFG 0x0008
+ # define GX_DCFG_CRT_EN 0x00000001
+ # define GX_DCFG_HSYNC_EN 0x00000002
+@@ -42,6 +46,14 @@ extern struct geode_vid_ops gx_vid_ops;
+ #define GX_MISC_DAC_PWRDN 0x00000400
+ #define GX_MISC_A_PWRDN 0x00000800
+
++/* Gamma correction RAM - address and data registers */
++
++#define GX_GAR 0x038
++#define GX_GDR 0x040
++
++#define GXFB_GAMMA_DWORDS 256 /* number of dwords in the gamma ram */
++#define GXFB_GAMMA_SIZE (GXFB_GAMMA_DWORDS * sizeof(unsigned int))
++
+ /* Geode GX flat panel display control registers */
+
+ #define GX_FP_PT1 0x0400
+@@ -69,4 +81,13 @@ extern struct geode_vid_ops gx_vid_ops;
+ # define MSR_GLCP_DOTPLL_BYPASS (0x0000000000008000ull)
+ # define MSR_GLCP_DOTPLL_LOCK (0x0000000002000000ull)
+
++int gxfb_powerdown(struct fb_info *info);
++int gxfb_powerup(struct fb_info *info);
++
++void gx_set_dclk_frequency(struct fb_info *info);
++unsigned int gx_get_dclk(struct fb_info *info);
++
++void gx_save_regs(struct fb_info *info, struct geoderegs *regs);
++void gx_restore_regs(struct fb_info *info, struct geoderegs *regs);
++
+ #endif /* !__VIDEO_GX_H__ */
+Index: linux-2.6.23.17/drivers/video/modedb.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/video/modedb.c
++++ linux-2.6.23.17/drivers/video/modedb.c
+@@ -33,6 +33,8 @@ const char *global_mode_option;
+ * Standard video mode definitions (taken from XFree86)
+ */
+
++#define DEFAULT_MODEDB_INDEX 0
++
+ static const struct fb_videomode modedb[] = {
+ {
+ /* 640x400 @ 70 Hz, 31.5 kHz hsync */
+@@ -504,7 +506,8 @@ int fb_find_mode(struct fb_var_screeninf
+ }
+
+ if (!default_mode)
+- default_mode = &db[0];
++ default_mode = (db == modedb) ?
++ &modedb[DEFAULT_MODEDB_INDEX] : &db[0];
+
+ if (!default_bpp)
+ default_bpp = 8;
+Index: linux-2.6.23.17/fs/Kconfig
+===================================================================
+--- linux-2.6.23.17.orig/fs/Kconfig
++++ linux-2.6.23.17/fs/Kconfig
+@@ -1003,6 +1003,23 @@ config HUGETLBFS
+ config HUGETLB_PAGE
+ def_bool HUGETLBFS
+
++config PROMFS_FS
++ tristate "PromFS IEEE 1275 file system support"
++ depends on SPARC || PPC || OLPC
++ help
++ PromFS is a file system interface to various IEEE-1275 compatible
++ firmwares. If you have such a firmware (Sparc64, PowerPC, and
++ some other architectures and embedded systems have such firmwares,
++ with names like "OpenBoot (tm)" and "OpenFirmware"), say Y here
++ to be able to access the firmware's device-tree from Linux.
++
++ The firmware device-tree is available as a virtual file system,
++ can be mounted under /prom with the command "mount -t promfs
++ none /prom".
++
++ To compile PromFS support as a module, choose M here; the module
++ will be called promfs. If unsure, choose M.
++
+ config RAMFS
+ bool
+ default y
+@@ -1229,6 +1246,14 @@ config JFFS2_FS_WRITEBUFFER
+ - NOR flash with transparent ECC
+ - DataFlash
+
++config JFFS2_FS_WBUF_VERIFY
++ bool "Verify JFFS2 write-buffer reads"
++ depends on JFFS2_FS_WRITEBUFFER
++ default n
++ help
++ This causes JFFS2 to read back every page written through the
++ write-buffer, and check for errors.
++
+ config JFFS2_SUMMARY
+ bool "JFFS2 summary support (EXPERIMENTAL)"
+ depends on JFFS2_FS && EXPERIMENTAL
+@@ -1299,52 +1324,52 @@ config JFFS2_ZLIB
+ select ZLIB_DEFLATE
+ depends on JFFS2_FS
+ default y
+- help
+- Zlib is designed to be a free, general-purpose, legally unencumbered,
+- lossless data-compression library for use on virtually any computer
+- hardware and operating system. See <http://www.gzip.org/zlib/> for
+- further information.
++ help
++ Zlib is designed to be a free, general-purpose, legally unencumbered,
++ lossless data-compression library for use on virtually any computer
++ hardware and operating system. See <http://www.gzip.org/zlib/> for
++ further information.
+
+- Say 'Y' if unsure.
++ Say 'Y' if unsure.
+
+ config JFFS2_RTIME
+ bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS
+ depends on JFFS2_FS
+ default y
+- help
+- Rtime does manage to recompress already-compressed data. Say 'Y' if unsure.
++ help
++ Rtime does manage to recompress already-compressed data. Say 'Y' if unsure.
+
+ config JFFS2_RUBIN
+ bool "JFFS2 RUBIN compression support" if JFFS2_COMPRESSION_OPTIONS
+ depends on JFFS2_FS
+ default n
+- help
+- RUBINMIPS and DYNRUBIN compressors. Say 'N' if unsure.
++ help
++ RUBINMIPS and DYNRUBIN compressors. Say 'N' if unsure.
+
+ choice
+- prompt "JFFS2 default compression mode" if JFFS2_COMPRESSION_OPTIONS
+- default JFFS2_CMODE_PRIORITY
+- depends on JFFS2_FS
+- help
+- You can set here the default compression mode of JFFS2 from
+- the available compression modes. Don't touch if unsure.
++ prompt "JFFS2 default compression mode" if JFFS2_COMPRESSION_OPTIONS
++ default JFFS2_CMODE_PRIORITY
++ depends on JFFS2_FS
++ help
++ You can set here the default compression mode of JFFS2 from
++ the available compression modes. Don't touch if unsure.
+
+ config JFFS2_CMODE_NONE
+- bool "no compression"
+- help
+- Uses no compression.
++ bool "no compression"
++ help
++ Uses no compression.
+
+ config JFFS2_CMODE_PRIORITY
+- bool "priority"
+- help
+- Tries the compressors in a predefined order and chooses the first
+- successful one.
++ bool "priority"
++ help
++ Tries the compressors in a predefined order and chooses the first
++ successful one.
+
+ config JFFS2_CMODE_SIZE
+- bool "size (EXPERIMENTAL)"
+- help
+- Tries all compressors and chooses the one which has the smallest
+- result.
++ bool "size (EXPERIMENTAL)"
++ help
++ Tries all compressors and chooses the one which has the smallest
++ result.
+
+ endchoice
+
+Index: linux-2.6.23.17/fs/Makefile
+===================================================================
+--- linux-2.6.23.17.orig/fs/Makefile
++++ linux-2.6.23.17/fs/Makefile
+@@ -110,6 +110,7 @@ obj-$(CONFIG_ADFS_FS) += adfs/
+ obj-$(CONFIG_FUSE_FS) += fuse/
+ obj-$(CONFIG_UDF_FS) += udf/
+ obj-$(CONFIG_SUN_OPENPROMFS) += openpromfs/
++obj-$(CONFIG_PROMFS_FS) += promfs/
+ obj-$(CONFIG_JFS_FS) += jfs/
+ obj-$(CONFIG_XFS_FS) += xfs/
+ obj-$(CONFIG_9P_FS) += 9p/
+Index: linux-2.6.23.17/fs/jffs2/background.c
+===================================================================
+--- linux-2.6.23.17.orig/fs/jffs2/background.c
++++ linux-2.6.23.17/fs/jffs2/background.c
+@@ -23,8 +23,8 @@ static int jffs2_garbage_collect_thread(
+ void jffs2_garbage_collect_trigger(struct jffs2_sb_info *c)
+ {
+ spin_lock(&c->erase_completion_lock);
+- if (c->gc_task && jffs2_thread_should_wake(c))
+- send_sig(SIGHUP, c->gc_task, 1);
++ if (c->gc_task && jffs2_thread_should_wake(c))
++ send_sig(SIGHUP, c->gc_task, 1);
+ spin_unlock(&c->erase_completion_lock);
+ }
+
+Index: linux-2.6.23.17/fs/jffs2/compr.c
+===================================================================
+--- linux-2.6.23.17.orig/fs/jffs2/compr.c
++++ linux-2.6.23.17/fs/jffs2/compr.c
+@@ -5,7 +5,7 @@
+ * Created by Arjan van de Ven <arjanv@redhat.com>
+ *
+ * Copyright © 2004 Ferenc Havasi <havasi@inf.u-szeged.hu>,
+- * University of Szeged, Hungary
++ * University of Szeged, Hungary
+ *
+ * For licensing information, see the file 'LICENCE' in this directory.
+ *
+@@ -43,121 +43,122 @@ static uint32_t none_stat_compr_blocks=0
+ * *datalen accordingly to show the amount of data which were compressed.
+ */
+ uint16_t jffs2_compress(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
+- unsigned char *data_in, unsigned char **cpage_out,
+- uint32_t *datalen, uint32_t *cdatalen)
++ unsigned char *data_in, unsigned char **cpage_out,
++ uint32_t *datalen, uint32_t *cdatalen)
+ {
+ int ret = JFFS2_COMPR_NONE;
+- int compr_ret;
+- struct jffs2_compressor *this, *best=NULL;
+- unsigned char *output_buf = NULL, *tmp_buf;
+- uint32_t orig_slen, orig_dlen;
+- uint32_t best_slen=0, best_dlen=0;
+-
+- switch (jffs2_compression_mode) {
+- case JFFS2_COMPR_MODE_NONE:
+- break;
+- case JFFS2_COMPR_MODE_PRIORITY:
+- output_buf = kmalloc(*cdatalen,GFP_KERNEL);
+- if (!output_buf) {
+- printk(KERN_WARNING "JFFS2: No memory for compressor allocation. Compression failed.\n");
+- goto out;
+- }
+- orig_slen = *datalen;
+- orig_dlen = *cdatalen;
+- spin_lock(&jffs2_compressor_list_lock);
+- list_for_each_entry(this, &jffs2_compressor_list, list) {
+- /* Skip decompress-only backwards-compatibility and disabled modules */
+- if ((!this->compress)||(this->disabled))
+- continue;
+-
+- this->usecount++;
+- spin_unlock(&jffs2_compressor_list_lock);
+- *datalen = orig_slen;
+- *cdatalen = orig_dlen;
+- compr_ret = this->compress(data_in, output_buf, datalen, cdatalen, NULL);
+- spin_lock(&jffs2_compressor_list_lock);
+- this->usecount--;
+- if (!compr_ret) {
+- ret = this->compr;
+- this->stat_compr_blocks++;
+- this->stat_compr_orig_size += *datalen;
+- this->stat_compr_new_size += *cdatalen;
+- break;
+- }
+- }
+- spin_unlock(&jffs2_compressor_list_lock);
+- if (ret == JFFS2_COMPR_NONE) kfree(output_buf);
+- break;
+- case JFFS2_COMPR_MODE_SIZE:
+- orig_slen = *datalen;
+- orig_dlen = *cdatalen;
+- spin_lock(&jffs2_compressor_list_lock);
+- list_for_each_entry(this, &jffs2_compressor_list, list) {
+- /* Skip decompress-only backwards-compatibility and disabled modules */
+- if ((!this->compress)||(this->disabled))
+- continue;
+- /* Allocating memory for output buffer if necessary */
+- if ((this->compr_buf_size<orig_dlen)&&(this->compr_buf)) {
+- spin_unlock(&jffs2_compressor_list_lock);
+- kfree(this->compr_buf);
+- spin_lock(&jffs2_compressor_list_lock);
+- this->compr_buf_size=0;
+- this->compr_buf=NULL;
+- }
+- if (!this->compr_buf) {
+- spin_unlock(&jffs2_compressor_list_lock);
+- tmp_buf = kmalloc(orig_dlen,GFP_KERNEL);
+- spin_lock(&jffs2_compressor_list_lock);
+- if (!tmp_buf) {
+- printk(KERN_WARNING "JFFS2: No memory for compressor allocation. (%d bytes)\n",orig_dlen);
+- continue;
+- }
+- else {
+- this->compr_buf = tmp_buf;
+- this->compr_buf_size = orig_dlen;
+- }
+- }
+- this->usecount++;
+- spin_unlock(&jffs2_compressor_list_lock);
+- *datalen = orig_slen;
+- *cdatalen = orig_dlen;
+- compr_ret = this->compress(data_in, this->compr_buf, datalen, cdatalen, NULL);
+- spin_lock(&jffs2_compressor_list_lock);
+- this->usecount--;
+- if (!compr_ret) {
+- if ((!best_dlen)||(best_dlen>*cdatalen)) {
+- best_dlen = *cdatalen;
+- best_slen = *datalen;
+- best = this;
+- }
+- }
+- }
+- if (best_dlen) {
+- *cdatalen = best_dlen;
+- *datalen = best_slen;
+- output_buf = best->compr_buf;
+- best->compr_buf = NULL;
+- best->compr_buf_size = 0;
+- best->stat_compr_blocks++;
+- best->stat_compr_orig_size += best_slen;
+- best->stat_compr_new_size += best_dlen;
+- ret = best->compr;
+- }
+- spin_unlock(&jffs2_compressor_list_lock);
+- break;
+- default:
+- printk(KERN_ERR "JFFS2: unknow compression mode.\n");
+- }
++ int compr_ret;
++ struct jffs2_compressor *this, *best=NULL;
++ unsigned char *output_buf = NULL, *tmp_buf;
++ uint32_t orig_slen, orig_dlen;
++ uint32_t best_slen=0, best_dlen=0;
++
++ switch (jffs2_compression_mode) {
++ case JFFS2_COMPR_MODE_NONE:
++ break;
++ case JFFS2_COMPR_MODE_PRIORITY:
++ output_buf = kmalloc(*cdatalen,GFP_KERNEL);
++ if (!output_buf) {
++ printk(KERN_WARNING "JFFS2: No memory for compressor allocation. Compression failed.\n");
++ goto out;
++ }
++ orig_slen = *datalen;
++ orig_dlen = *cdatalen;
++ spin_lock(&jffs2_compressor_list_lock);
++ list_for_each_entry(this, &jffs2_compressor_list, list) {
++ /* Skip decompress-only backwards-compatibility and disabled modules */
++ if ((!this->compress)||(this->disabled))
++ continue;
++
++ this->usecount++;
++ spin_unlock(&jffs2_compressor_list_lock);
++ *datalen = orig_slen;
++ *cdatalen = orig_dlen;
++ compr_ret = this->compress(data_in, output_buf, datalen, cdatalen, NULL);
++ spin_lock(&jffs2_compressor_list_lock);
++ this->usecount--;
++ if (!compr_ret) {
++ ret = this->compr;
++ this->stat_compr_blocks++;
++ this->stat_compr_orig_size += *datalen;
++ this->stat_compr_new_size += *cdatalen;
++ break;
++ }
++ }
++ spin_unlock(&jffs2_compressor_list_lock);
++ if (ret == JFFS2_COMPR_NONE)
++ kfree(output_buf);
++ break;
++ case JFFS2_COMPR_MODE_SIZE:
++ orig_slen = *datalen;
++ orig_dlen = *cdatalen;
++ spin_lock(&jffs2_compressor_list_lock);
++ list_for_each_entry(this, &jffs2_compressor_list, list) {
++ /* Skip decompress-only backwards-compatibility and disabled modules */
++ if ((!this->compress)||(this->disabled))
++ continue;
++ /* Allocating memory for output buffer if necessary */
++ if ((this->compr_buf_size<orig_dlen)&&(this->compr_buf)) {
++ spin_unlock(&jffs2_compressor_list_lock);
++ kfree(this->compr_buf);
++ spin_lock(&jffs2_compressor_list_lock);
++ this->compr_buf_size=0;
++ this->compr_buf=NULL;
++ }
++ if (!this->compr_buf) {
++ spin_unlock(&jffs2_compressor_list_lock);
++ tmp_buf = kmalloc(orig_dlen,GFP_KERNEL);
++ spin_lock(&jffs2_compressor_list_lock);
++ if (!tmp_buf) {
++ printk(KERN_WARNING "JFFS2: No memory for compressor allocation. (%d bytes)\n",orig_dlen);
++ continue;
++ }
++ else {
++ this->compr_buf = tmp_buf;
++ this->compr_buf_size = orig_dlen;
++ }
++ }
++ this->usecount++;
++ spin_unlock(&jffs2_compressor_list_lock);
++ *datalen = orig_slen;
++ *cdatalen = orig_dlen;
++ compr_ret = this->compress(data_in, this->compr_buf, datalen, cdatalen, NULL);
++ spin_lock(&jffs2_compressor_list_lock);
++ this->usecount--;
++ if (!compr_ret) {
++ if ((!best_dlen)||(best_dlen>*cdatalen)) {
++ best_dlen = *cdatalen;
++ best_slen = *datalen;
++ best = this;
++ }
++ }
++ }
++ if (best_dlen) {
++ *cdatalen = best_dlen;
++ *datalen = best_slen;
++ output_buf = best->compr_buf;
++ best->compr_buf = NULL;
++ best->compr_buf_size = 0;
++ best->stat_compr_blocks++;
++ best->stat_compr_orig_size += best_slen;
++ best->stat_compr_new_size += best_dlen;
++ ret = best->compr;
++ }
++ spin_unlock(&jffs2_compressor_list_lock);
++ break;
++ default:
++ printk(KERN_ERR "JFFS2: unknow compression mode.\n");
++ }
+ out:
+- if (ret == JFFS2_COMPR_NONE) {
+- *cpage_out = data_in;
+- *datalen = *cdatalen;
+- none_stat_compr_blocks++;
+- none_stat_compr_size += *datalen;
+- }
+- else {
+- *cpage_out = output_buf;
+- }
++ if (ret == JFFS2_COMPR_NONE) {
++ *cpage_out = data_in;
++ *datalen = *cdatalen;
++ none_stat_compr_blocks++;
++ none_stat_compr_size += *datalen;
++ }
++ else {
++ *cpage_out = output_buf;
++ }
+ return ret;
+ }
+
+@@ -165,8 +166,8 @@ int jffs2_decompress(struct jffs2_sb_inf
+ uint16_t comprtype, unsigned char *cdata_in,
+ unsigned char *data_out, uint32_t cdatalen, uint32_t datalen)
+ {
+- struct jffs2_compressor *this;
+- int ret;
++ struct jffs2_compressor *this;
++ int ret;
+
+ /* Older code had a bug where it would write non-zero 'usercompr'
+ fields. Deal with it. */
+@@ -177,32 +178,32 @@ int jffs2_decompress(struct jffs2_sb_inf
+ case JFFS2_COMPR_NONE:
+ /* This should be special-cased elsewhere, but we might as well deal with it */
+ memcpy(data_out, cdata_in, datalen);
+- none_stat_decompr_blocks++;
++ none_stat_decompr_blocks++;
+ break;
+ case JFFS2_COMPR_ZERO:
+ memset(data_out, 0, datalen);
+ break;
+ default:
+- spin_lock(&jffs2_compressor_list_lock);
+- list_for_each_entry(this, &jffs2_compressor_list, list) {
+- if (comprtype == this->compr) {
+- this->usecount++;
+- spin_unlock(&jffs2_compressor_list_lock);
+- ret = this->decompress(cdata_in, data_out, cdatalen, datalen, NULL);
+- spin_lock(&jffs2_compressor_list_lock);
+- if (ret) {
+- printk(KERN_WARNING "Decompressor \"%s\" returned %d\n", this->name, ret);
+- }
+- else {
+- this->stat_decompr_blocks++;
+- }
+- this->usecount--;
+- spin_unlock(&jffs2_compressor_list_lock);
+- return ret;
+- }
+- }
++ spin_lock(&jffs2_compressor_list_lock);
++ list_for_each_entry(this, &jffs2_compressor_list, list) {
++ if (comprtype == this->compr) {
++ this->usecount++;
++ spin_unlock(&jffs2_compressor_list_lock);
++ ret = this->decompress(cdata_in, data_out, cdatalen, datalen, NULL);
++ spin_lock(&jffs2_compressor_list_lock);
++ if (ret) {
++ printk(KERN_WARNING "Decompressor \"%s\" returned %d\n", this->name, ret);
++ }
++ else {
++ this->stat_decompr_blocks++;
++ }
++ this->usecount--;
++ spin_unlock(&jffs2_compressor_list_lock);
++ return ret;
++ }
++ }
+ printk(KERN_WARNING "JFFS2 compression type 0x%02x not available.\n", comprtype);
+- spin_unlock(&jffs2_compressor_list_lock);
++ spin_unlock(&jffs2_compressor_list_lock);
+ return -EIO;
+ }
+ return 0;
+@@ -210,108 +211,108 @@ int jffs2_decompress(struct jffs2_sb_inf
+
+ int jffs2_register_compressor(struct jffs2_compressor *comp)
+ {
+- struct jffs2_compressor *this;
++ struct jffs2_compressor *this;
+
+- if (!comp->name) {
+- printk(KERN_WARNING "NULL compressor name at registering JFFS2 compressor. Failed.\n");
+- return -1;
+- }
+- comp->compr_buf_size=0;
+- comp->compr_buf=NULL;
+- comp->usecount=0;
+- comp->stat_compr_orig_size=0;
+- comp->stat_compr_new_size=0;
+- comp->stat_compr_blocks=0;
+- comp->stat_decompr_blocks=0;
+- D1(printk(KERN_DEBUG "Registering JFFS2 compressor \"%s\"\n", comp->name));
+-
+- spin_lock(&jffs2_compressor_list_lock);
+-
+- list_for_each_entry(this, &jffs2_compressor_list, list) {
+- if (this->priority < comp->priority) {
+- list_add(&comp->list, this->list.prev);
+- goto out;
+- }
+- }
+- list_add_tail(&comp->list, &jffs2_compressor_list);
++ if (!comp->name) {
++ printk(KERN_WARNING "NULL compressor name at registering JFFS2 compressor. Failed.\n");
++ return -1;
++ }
++ comp->compr_buf_size=0;
++ comp->compr_buf=NULL;
++ comp->usecount=0;
++ comp->stat_compr_orig_size=0;
++ comp->stat_compr_new_size=0;
++ comp->stat_compr_blocks=0;
++ comp->stat_decompr_blocks=0;
++ D1(printk(KERN_DEBUG "Registering JFFS2 compressor \"%s\"\n", comp->name));
++
++ spin_lock(&jffs2_compressor_list_lock);
++
++ list_for_each_entry(this, &jffs2_compressor_list, list) {
++ if (this->priority < comp->priority) {
++ list_add(&comp->list, this->list.prev);
++ goto out;
++ }
++ }
++ list_add_tail(&comp->list, &jffs2_compressor_list);
+ out:
+- D2(list_for_each_entry(this, &jffs2_compressor_list, list) {
+- printk(KERN_DEBUG "Compressor \"%s\", prio %d\n", this->name, this->priority);
+- })
++ D2(list_for_each_entry(this, &jffs2_compressor_list, list) {
++ printk(KERN_DEBUG "Compressor \"%s\", prio %d\n", this->name, this->priority);
++ })
+
+- spin_unlock(&jffs2_compressor_list_lock);
++ spin_unlock(&jffs2_compressor_list_lock);
+
+- return 0;
++ return 0;
+ }
+
+ int jffs2_unregister_compressor(struct jffs2_compressor *comp)
+ {
+- D2(struct jffs2_compressor *this;)
++ D2(struct jffs2_compressor *this;)
++
++ D1(printk(KERN_DEBUG "Unregistering JFFS2 compressor \"%s\"\n", comp->name));
+
+- D1(printk(KERN_DEBUG "Unregistering JFFS2 compressor \"%s\"\n", comp->name));
++ spin_lock(&jffs2_compressor_list_lock);
+
+- spin_lock(&jffs2_compressor_list_lock);
++ if (comp->usecount) {
++ spin_unlock(&jffs2_compressor_list_lock);
++ printk(KERN_WARNING "JFFS2: Compressor modul is in use. Unregister failed.\n");
++ return -1;
++ }
++ list_del(&comp->list);
+
+- if (comp->usecount) {
+- spin_unlock(&jffs2_compressor_list_lock);
+- printk(KERN_WARNING "JFFS2: Compressor modul is in use. Unregister failed.\n");
+- return -1;
+- }
+- list_del(&comp->list);
+-
+- D2(list_for_each_entry(this, &jffs2_compressor_list, list) {
+- printk(KERN_DEBUG "Compressor \"%s\", prio %d\n", this->name, this->priority);
+- })
+- spin_unlock(&jffs2_compressor_list_lock);
+- return 0;
++ D2(list_for_each_entry(this, &jffs2_compressor_list, list) {
++ printk(KERN_DEBUG "Compressor \"%s\", prio %d\n", this->name, this->priority);
++ })
++ spin_unlock(&jffs2_compressor_list_lock);
++ return 0;
+ }
+
+ void jffs2_free_comprbuf(unsigned char *comprbuf, unsigned char *orig)
+ {
+- if (orig != comprbuf)
+- kfree(comprbuf);
++ if (orig != comprbuf)
++ kfree(comprbuf);
+ }
+
+ int __init jffs2_compressors_init(void)
+ {
+ /* Registering compressors */
+ #ifdef CONFIG_JFFS2_ZLIB
+- jffs2_zlib_init();
++ jffs2_zlib_init();
+ #endif
+ #ifdef CONFIG_JFFS2_RTIME
+- jffs2_rtime_init();
++ jffs2_rtime_init();
+ #endif
+ #ifdef CONFIG_JFFS2_RUBIN
+- jffs2_rubinmips_init();
+- jffs2_dynrubin_init();
++ jffs2_rubinmips_init();
++ jffs2_dynrubin_init();
+ #endif
+ /* Setting default compression mode */
+ #ifdef CONFIG_JFFS2_CMODE_NONE
+- jffs2_compression_mode = JFFS2_COMPR_MODE_NONE;
+- D1(printk(KERN_INFO "JFFS2: default compression mode: none\n");)
++ jffs2_compression_mode = JFFS2_COMPR_MODE_NONE;
++ D1(printk(KERN_INFO "JFFS2: default compression mode: none\n");)
+ #else
+ #ifdef CONFIG_JFFS2_CMODE_SIZE
+- jffs2_compression_mode = JFFS2_COMPR_MODE_SIZE;
+- D1(printk(KERN_INFO "JFFS2: default compression mode: size\n");)
++ jffs2_compression_mode = JFFS2_COMPR_MODE_SIZE;
++ D1(printk(KERN_INFO "JFFS2: default compression mode: size\n");)
+ #else
+- D1(printk(KERN_INFO "JFFS2: default compression mode: priority\n");)
++ D1(printk(KERN_INFO "JFFS2: default compression mode: priority\n");)
+ #endif
+ #endif
+- return 0;
++ return 0;
+ }
+
+ int jffs2_compressors_exit(void)
+ {
+ /* Unregistering compressors */
+ #ifdef CONFIG_JFFS2_RUBIN
+- jffs2_dynrubin_exit();
+- jffs2_rubinmips_exit();
++ jffs2_dynrubin_exit();
++ jffs2_rubinmips_exit();
+ #endif
+ #ifdef CONFIG_JFFS2_RTIME
+- jffs2_rtime_exit();
++ jffs2_rtime_exit();
+ #endif
+ #ifdef CONFIG_JFFS2_ZLIB
+- jffs2_zlib_exit();
++ jffs2_zlib_exit();
+ #endif
+- return 0;
++ return 0;
+ }
+Index: linux-2.6.23.17/fs/jffs2/compr.h
+===================================================================
+--- linux-2.6.23.17.orig/fs/jffs2/compr.h
++++ linux-2.6.23.17/fs/jffs2/compr.h
+@@ -2,7 +2,7 @@
+ * JFFS2 -- Journalling Flash File System, Version 2.
+ *
+ * Copyright © 2004 Ferenc Havasi <havasi@inf.u-szeged.hu>,
+- * University of Szeged, Hungary
++ * University of Szeged, Hungary
+ *
+ * For licensing information, see the file 'LICENCE' in this directory.
+ *
+@@ -32,29 +32,29 @@
+ #define JFFS2_ZLIB_PRIORITY 60
+
+ #define JFFS2_RUBINMIPS_DISABLED /* RUBINs will be used only */
+-#define JFFS2_DYNRUBIN_DISABLED /* for decompression */
++#define JFFS2_DYNRUBIN_DISABLED /* for decompression */
+
+ #define JFFS2_COMPR_MODE_NONE 0
+ #define JFFS2_COMPR_MODE_PRIORITY 1
+ #define JFFS2_COMPR_MODE_SIZE 2
+
+ struct jffs2_compressor {
+- struct list_head list;
+- int priority; /* used by prirority comr. mode */
+- char *name;
+- char compr; /* JFFS2_COMPR_XXX */
+- int (*compress)(unsigned char *data_in, unsigned char *cpage_out,
+- uint32_t *srclen, uint32_t *destlen, void *model);
+- int (*decompress)(unsigned char *cdata_in, unsigned char *data_out,
+- uint32_t cdatalen, uint32_t datalen, void *model);
+- int usecount;
+- int disabled; /* if seted the compressor won't compress */
+- unsigned char *compr_buf; /* used by size compr. mode */
+- uint32_t compr_buf_size; /* used by size compr. mode */
+- uint32_t stat_compr_orig_size;
+- uint32_t stat_compr_new_size;
+- uint32_t stat_compr_blocks;
+- uint32_t stat_decompr_blocks;
++ struct list_head list;
++ int priority; /* used by prirority comr. mode */
++ char *name;
++ char compr; /* JFFS2_COMPR_XXX */
++ int (*compress)(unsigned char *data_in, unsigned char *cpage_out,
++ uint32_t *srclen, uint32_t *destlen, void *model);
++ int (*decompress)(unsigned char *cdata_in, unsigned char *data_out,
++ uint32_t cdatalen, uint32_t datalen, void *model);
++ int usecount;
++ int disabled; /* if set the compressor won't compress */
++ unsigned char *compr_buf; /* used by size compr. mode */
++ uint32_t compr_buf_size; /* used by size compr. mode */
++ uint32_t stat_compr_orig_size;
++ uint32_t stat_compr_new_size;
++ uint32_t stat_compr_blocks;
++ uint32_t stat_decompr_blocks;
+ };
+
+ int jffs2_register_compressor(struct jffs2_compressor *comp);
+@@ -64,12 +64,12 @@ int jffs2_compressors_init(void);
+ int jffs2_compressors_exit(void);
+
+ uint16_t jffs2_compress(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
+- unsigned char *data_in, unsigned char **cpage_out,
+- uint32_t *datalen, uint32_t *cdatalen);
++ unsigned char *data_in, unsigned char **cpage_out,
++ uint32_t *datalen, uint32_t *cdatalen);
+
+ int jffs2_decompress(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
+- uint16_t comprtype, unsigned char *cdata_in,
+- unsigned char *data_out, uint32_t cdatalen, uint32_t datalen);
++ uint16_t comprtype, unsigned char *cdata_in,
++ unsigned char *data_out, uint32_t cdatalen, uint32_t datalen);
+
+ void jffs2_free_comprbuf(unsigned char *comprbuf, unsigned char *orig);
+
+Index: linux-2.6.23.17/fs/jffs2/compr_rtime.c
+===================================================================
+--- linux-2.6.23.17.orig/fs/jffs2/compr_rtime.c
++++ linux-2.6.23.17/fs/jffs2/compr_rtime.c
+@@ -104,7 +104,7 @@ static int jffs2_rtime_decompress(unsign
+ }
+ }
+ }
+- return 0;
++ return 0;
+ }
+
+ static struct jffs2_compressor jffs2_rtime_comp = {
+Index: linux-2.6.23.17/fs/jffs2/compr_rubin.c
+===================================================================
+--- linux-2.6.23.17.orig/fs/jffs2/compr_rubin.c
++++ linux-2.6.23.17/fs/jffs2/compr_rubin.c
+@@ -384,7 +384,7 @@ static int jffs2_rubinmips_decompress(un
+ void *model)
+ {
+ rubin_do_decompress(BIT_DIVIDER_MIPS, bits_mips, data_in, cpage_out, sourcelen, dstlen);
+- return 0;
++ return 0;
+ }
+
+ static int jffs2_dynrubin_decompress(unsigned char *data_in,
+@@ -399,7 +399,7 @@ static int jffs2_dynrubin_decompress(uns
+ bits[c] = data_in[c];
+
+ rubin_do_decompress(256, bits, data_in+8, cpage_out, sourcelen-8, dstlen);
+- return 0;
++ return 0;
+ }
+
+ static struct jffs2_compressor jffs2_rubinmips_comp = {
+Index: linux-2.6.23.17/fs/jffs2/compr_zlib.c
+===================================================================
+--- linux-2.6.23.17.orig/fs/jffs2/compr_zlib.c
++++ linux-2.6.23.17/fs/jffs2/compr_zlib.c
+@@ -181,7 +181,7 @@ static int jffs2_zlib_decompress(unsigne
+ }
+ zlib_inflateEnd(&inf_strm);
+ mutex_unlock(&inflate_mutex);
+- return 0;
++ return 0;
+ }
+
+ static struct jffs2_compressor jffs2_zlib_comp = {
+@@ -203,11 +203,11 @@ int __init jffs2_zlib_init(void)
+
+ ret = alloc_workspaces();
+ if (ret)
+- return ret;
++ return ret;
+
+ ret = jffs2_register_compressor(&jffs2_zlib_comp);
+ if (ret)
+- free_workspaces();
++ free_workspaces();
+
+ return ret;
+ }
+Index: linux-2.6.23.17/fs/jffs2/dir.c
+===================================================================
+--- linux-2.6.23.17.orig/fs/jffs2/dir.c
++++ linux-2.6.23.17/fs/jffs2/dir.c
+@@ -32,7 +32,7 @@ static int jffs2_mkdir (struct inode *,s
+ static int jffs2_rmdir (struct inode *,struct dentry *);
+ static int jffs2_mknod (struct inode *,struct dentry *,int,dev_t);
+ static int jffs2_rename (struct inode *, struct dentry *,
+- struct inode *, struct dentry *);
++ struct inode *, struct dentry *);
+
+ const struct file_operations jffs2_dir_operations =
+ {
+@@ -770,7 +770,7 @@ static int jffs2_mknod (struct inode *di
+ }
+
+ static int jffs2_rename (struct inode *old_dir_i, struct dentry *old_dentry,
+- struct inode *new_dir_i, struct dentry *new_dentry)
++ struct inode *new_dir_i, struct dentry *new_dentry)
+ {
+ int ret;
+ struct jffs2_sb_info *c = JFFS2_SB_INFO(old_dir_i->i_sb);
+Index: linux-2.6.23.17/fs/jffs2/erase.c
+===================================================================
+--- linux-2.6.23.17.orig/fs/jffs2/erase.c
++++ linux-2.6.23.17/fs/jffs2/erase.c
+@@ -38,8 +38,8 @@ static void jffs2_erase_block(struct jff
+ #ifdef __ECOS
+ ret = jffs2_flash_erase(c, jeb);
+ if (!ret) {
+- jffs2_erase_succeeded(c, jeb);
+- return;
++ jffs2_erase_succeeded(c, jeb);
++ return;
+ }
+ bad_offset = jeb->offset;
+ #else /* Linux */
+@@ -50,12 +50,14 @@ static void jffs2_erase_block(struct jff
+ instr = kmalloc(sizeof(struct erase_info) + sizeof(struct erase_priv_struct), GFP_KERNEL);
+ if (!instr) {
+ printk(KERN_WARNING "kmalloc for struct erase_info in jffs2_erase_block failed. Refiling block for later\n");
++ down(&c->erase_free_sem);
+ spin_lock(&c->erase_completion_lock);
+ list_move(&jeb->list, &c->erase_pending_list);
+ c->erasing_size -= c->sector_size;
+ c->dirty_size += c->sector_size;
+ jeb->dirty_size = c->sector_size;
+ spin_unlock(&c->erase_completion_lock);
++ up(&c->erase_free_sem);
+ return;
+ }
+
+@@ -82,12 +84,14 @@ static void jffs2_erase_block(struct jff
+ if (ret == -ENOMEM || ret == -EAGAIN) {
+ /* Erase failed immediately. Refile it on the list */
+ D1(printk(KERN_DEBUG "Erase at 0x%08x failed: %d. Refiling on erase_pending_list\n", jeb->offset, ret));
++ down(&c->erase_free_sem);
+ spin_lock(&c->erase_completion_lock);
+ list_move(&jeb->list, &c->erase_pending_list);
+ c->erasing_size -= c->sector_size;
+ c->dirty_size += c->sector_size;
+ jeb->dirty_size = c->sector_size;
+ spin_unlock(&c->erase_completion_lock);
++ up(&c->erase_free_sem);
+ return;
+ }
+
+@@ -114,6 +118,7 @@ void jffs2_erase_pending_blocks(struct j
+ jeb = list_entry(c->erase_complete_list.next, struct jffs2_eraseblock, list);
+ list_del(&jeb->list);
+ spin_unlock(&c->erase_completion_lock);
++ up(&c->erase_free_sem);
+ jffs2_mark_erased_block(c, jeb);
+
+ if (!--count) {
+@@ -134,6 +139,7 @@ void jffs2_erase_pending_blocks(struct j
+ jffs2_free_jeb_node_refs(c, jeb);
+ list_add(&jeb->list, &c->erasing_list);
+ spin_unlock(&c->erase_completion_lock);
++ up(&c->erase_free_sem);
+
+ jffs2_erase_block(c, jeb);
+
+@@ -142,23 +148,25 @@ void jffs2_erase_pending_blocks(struct j
+ }
+
+ /* Be nice */
+- cond_resched();
++ yield();
++ down(&c->erase_free_sem);
+ spin_lock(&c->erase_completion_lock);
+ }
+
+ spin_unlock(&c->erase_completion_lock);
++ up(&c->erase_free_sem);
+ done:
+ D1(printk(KERN_DEBUG "jffs2_erase_pending_blocks completed\n"));
+-
+- up(&c->erase_free_sem);
+ }
+
+ static void jffs2_erase_succeeded(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb)
+ {
+ D1(printk(KERN_DEBUG "Erase completed successfully at 0x%08x\n", jeb->offset));
++ down(&c->erase_free_sem);
+ spin_lock(&c->erase_completion_lock);
+ list_move_tail(&jeb->list, &c->erase_complete_list);
+ spin_unlock(&c->erase_completion_lock);
++ up(&c->erase_free_sem);
+ /* Ensure that kupdated calls us again to mark them clean */
+ jffs2_erase_pending_trigger(c);
+ }
+@@ -172,22 +180,26 @@ static void jffs2_erase_failed(struct jf
+ failed too many times. */
+ if (!jffs2_write_nand_badblock(c, jeb, bad_offset)) {
+ /* We'd like to give this block another try. */
++ down(&c->erase_free_sem);
+ spin_lock(&c->erase_completion_lock);
+ list_move(&jeb->list, &c->erase_pending_list);
+ c->erasing_size -= c->sector_size;
+ c->dirty_size += c->sector_size;
+ jeb->dirty_size = c->sector_size;
+ spin_unlock(&c->erase_completion_lock);
++ up(&c->erase_free_sem);
+ return;
+ }
+ }
+
++ down(&c->erase_free_sem);
+ spin_lock(&c->erase_completion_lock);
+ c->erasing_size -= c->sector_size;
+ c->bad_size += c->sector_size;
+ list_move(&jeb->list, &c->bad_list);
+ c->nr_erasing_blocks--;
+ spin_unlock(&c->erase_completion_lock);
++ up(&c->erase_free_sem);
+ wake_up(&c->erase_wait);
+ }
+
+@@ -317,6 +329,33 @@ static int jffs2_block_check_erase(struc
+ size_t retlen;
+ int ret = -EIO;
+
++ if (c->mtd->point) {
++ unsigned long *wordebuf;
++
++ ret = c->mtd->point(c->mtd, jeb->offset, c->sector_size, &retlen, (unsigned char **)&ebuf);
++ if (ret) {
++ D1(printk(KERN_DEBUG "MTD point failed %d\n", ret));
++ goto do_flash_read;
++ }
++ if (retlen < c->sector_size) {
++ /* Don't muck about if it won't let us point to the whole erase sector */
++ D1(printk(KERN_DEBUG "MTD point returned len too short: 0x%zx\n", retlen));
++ c->mtd->unpoint(c->mtd, ebuf, jeb->offset, c->sector_size);
++ goto do_flash_read;
++ }
++ wordebuf = ebuf-sizeof(*wordebuf);
++ retlen /= sizeof(*wordebuf);
++ do {
++ if (*++wordebuf != ~0)
++ break;
++ } while(--retlen);
++ c->mtd->unpoint(c->mtd, ebuf, jeb->offset, c->sector_size);
++ if (retlen)
++ printk(KERN_WARNING "Newly-erased block contained word 0x%lx at offset 0x%08x\n",
++ *wordebuf, jeb->offset + c->sector_size-retlen*sizeof(*wordebuf));
++ return 0;
++ }
++ do_flash_read:
+ ebuf = kmalloc(PAGE_SIZE, GFP_KERNEL);
+ if (!ebuf) {
+ printk(KERN_WARNING "Failed to allocate page buffer for verifying erase at 0x%08x. Refiling\n", jeb->offset);
+@@ -417,6 +456,7 @@ static void jffs2_mark_erased_block(stru
+ jffs2_link_node_ref(c, jeb, jeb->offset | REF_NORMAL, c->cleanmarker_size, NULL);
+ }
+
++ down(&c->erase_free_sem);
+ spin_lock(&c->erase_completion_lock);
+ c->erasing_size -= c->sector_size;
+ c->free_size += jeb->free_size;
+@@ -429,23 +469,28 @@ static void jffs2_mark_erased_block(stru
+ c->nr_erasing_blocks--;
+ c->nr_free_blocks++;
+ spin_unlock(&c->erase_completion_lock);
++ up(&c->erase_free_sem);
+ wake_up(&c->erase_wait);
+ return;
+
+ filebad:
++ down(&c->erase_free_sem);
+ spin_lock(&c->erase_completion_lock);
+ /* Stick it on a list (any list) so erase_failed can take it
+ right off again. Silly, but shouldn't happen often. */
+ list_add(&jeb->list, &c->erasing_list);
+ spin_unlock(&c->erase_completion_lock);
++ up(&c->erase_free_sem);
+ jffs2_erase_failed(c, jeb, bad_offset);
+ return;
+
+ refile:
+ /* Stick it back on the list from whence it came and come back later */
+ jffs2_erase_pending_trigger(c);
++ down(&c->erase_free_sem);
+ spin_lock(&c->erase_completion_lock);
+ list_add(&jeb->list, &c->erase_complete_list);
+ spin_unlock(&c->erase_completion_lock);
++ up(&c->erase_free_sem);
+ return;
+ }
+Index: linux-2.6.23.17/fs/jffs2/gc.c
+===================================================================
+--- linux-2.6.23.17.orig/fs/jffs2/gc.c
++++ linux-2.6.23.17/fs/jffs2/gc.c
+@@ -556,7 +556,7 @@ static int jffs2_garbage_collect_pristin
+
+ node = kmalloc(rawlen, GFP_KERNEL);
+ if (!node)
+- return -ENOMEM;
++ return -ENOMEM;
+
+ ret = jffs2_flash_read(c, ref_offset(raw), rawlen, &retlen, (char *)node);
+ if (!ret && retlen != rawlen)
+@@ -624,7 +624,7 @@ static int jffs2_garbage_collect_pristin
+
+ if (ret || (retlen != rawlen)) {
+ printk(KERN_NOTICE "Write of %d bytes at 0x%08x failed. returned %d, retlen %zd\n",
+- rawlen, phys_ofs, ret, retlen);
++ rawlen, phys_ofs, ret, retlen);
+ if (retlen) {
+ jffs2_add_physical_node_ref(c, phys_ofs | REF_OBSOLETE, rawlen, NULL);
+ } else {
+Index: linux-2.6.23.17/fs/jffs2/jffs2_fs_sb.h
+===================================================================
+--- linux-2.6.23.17.orig/fs/jffs2/jffs2_fs_sb.h
++++ linux-2.6.23.17/fs/jffs2/jffs2_fs_sb.h
+@@ -106,6 +106,9 @@ struct jffs2_sb_info {
+
+ uint32_t wbuf_pagesize; /* 0 for NOR and other flashes with no wbuf */
+
++#ifdef CONFIG_JFFS2_FS_WBUF_VERIFY
++ unsigned char *wbuf_verify; /* read-back buffer for verification */
++#endif
+ #ifdef CONFIG_JFFS2_FS_WRITEBUFFER
+ unsigned char *wbuf; /* Write-behind buffer for NAND flash */
+ uint32_t wbuf_ofs;
+Index: linux-2.6.23.17/fs/jffs2/nodelist.h
+===================================================================
+--- linux-2.6.23.17.orig/fs/jffs2/nodelist.h
++++ linux-2.6.23.17/fs/jffs2/nodelist.h
+@@ -127,7 +127,7 @@ static inline struct jffs2_inode_cache *
+ return ((struct jffs2_inode_cache *)raw);
+ }
+
+- /* flash_offset & 3 always has to be zero, because nodes are
++ /* flash_offset & 3 always has to be zero, because nodes are
+ always aligned at 4 bytes. So we have a couple of extra bits
+ to play with, which indicate the node's status; see below: */
+ #define REF_UNCHECKED 0 /* We haven't yet checked the CRC or built its inode */
+@@ -197,7 +197,7 @@ struct jffs2_inode_cache {
+ #define RAWNODE_CLASS_XATTR_DATUM 1
+ #define RAWNODE_CLASS_XATTR_REF 2
+
+-#define INOCACHE_HASHSIZE 128
++#define INOCACHE_HASHSIZE 1024
+
+ #define write_ofs(c) ((c)->nextblock->offset + (c)->sector_size - (c)->nextblock->free_size)
+
+Index: linux-2.6.23.17/fs/jffs2/nodemgmt.c
+===================================================================
+--- linux-2.6.23.17.orig/fs/jffs2/nodemgmt.c
++++ linux-2.6.23.17/fs/jffs2/nodemgmt.c
+@@ -154,7 +154,7 @@ int jffs2_reserve_space_gc(struct jffs2_
+ while(ret == -EAGAIN) {
+ ret = jffs2_do_reserve_space(c, minsize, len, sumsize);
+ if (ret) {
+- D1(printk(KERN_DEBUG "jffs2_reserve_space_gc: looping, ret is %d\n", ret));
++ D1(printk(KERN_DEBUG "jffs2_reserve_space_gc: looping, ret is %d\n", ret));
+ }
+ }
+ spin_unlock(&c->erase_completion_lock);
+@@ -423,7 +423,12 @@ struct jffs2_raw_node_ref *jffs2_add_phy
+ even after refiling c->nextblock */
+ if ((c->nextblock || ((ofs & 3) != REF_OBSOLETE))
+ && (jeb != c->nextblock || (ofs & ~3) != jeb->offset + (c->sector_size - jeb->free_size))) {
+- printk(KERN_WARNING "argh. node added in wrong place\n");
++ printk(KERN_WARNING "argh. node added in wrong place at 0x%08x(%d)\n", ofs & ~3, ofs & 3);
++ if (c->nextblock)
++ printk(KERN_WARNING "nextblock 0x%08x", c->nextblock->offset);
++ else
++ printk(KERN_WARNING "No nextblock");
++ printk(", expected at %08x\n", jeb->offset + (c->sector_size - jeb->free_size));
+ return ERR_PTR(-EINVAL);
+ }
+ #endif
+Index: linux-2.6.23.17/fs/jffs2/readinode.c
+===================================================================
+--- linux-2.6.23.17.orig/fs/jffs2/readinode.c
++++ linux-2.6.23.17/fs/jffs2/readinode.c
+@@ -211,7 +211,7 @@ static void jffs2_kill_tn(struct jffs2_s
+ * ordering.
+ *
+ * Returns 0 if the node was handled (including marking it obsolete)
+- * < 0 an if error occurred
++ * < 0 an if error occurred
+ */
+ static int jffs2_add_tn_to_tree(struct jffs2_sb_info *c,
+ struct jffs2_readinode_info *rii,
+@@ -862,8 +862,8 @@ static inline int read_unknown(struct jf
+ JFFS2_ERROR("REF_UNCHECKED but unknown node at %#08x\n",
+ ref_offset(ref));
+ JFFS2_ERROR("Node is {%04x,%04x,%08x,%08x}. Please report this error.\n",
+- je16_to_cpu(un->magic), je16_to_cpu(un->nodetype),
+- je32_to_cpu(un->totlen), je32_to_cpu(un->hdr_crc));
++ je16_to_cpu(un->magic), je16_to_cpu(un->nodetype),
++ je32_to_cpu(un->totlen), je32_to_cpu(un->hdr_crc));
+ jffs2_mark_node_obsolete(c, ref);
+ return 0;
+ }
+Index: linux-2.6.23.17/fs/jffs2/scan.c
+===================================================================
+--- linux-2.6.23.17.orig/fs/jffs2/scan.c
++++ linux-2.6.23.17/fs/jffs2/scan.c
+@@ -877,7 +877,7 @@ scan_more:
+ switch (je16_to_cpu(node->nodetype) & JFFS2_COMPAT_MASK) {
+ case JFFS2_FEATURE_ROCOMPAT:
+ printk(KERN_NOTICE "Read-only compatible feature node (0x%04x) found at offset 0x%08x\n", je16_to_cpu(node->nodetype), ofs);
+- c->flags |= JFFS2_SB_FLAG_RO;
++ c->flags |= JFFS2_SB_FLAG_RO;
+ if (!(jffs2_is_readonly(c)))
+ return -EROFS;
+ if ((err = jffs2_scan_dirty_space(c, jeb, PAD(je32_to_cpu(node->totlen)))))
+Index: linux-2.6.23.17/fs/jffs2/security.c
+===================================================================
+--- linux-2.6.23.17.orig/fs/jffs2/security.c
++++ linux-2.6.23.17/fs/jffs2/security.c
+@@ -38,9 +38,9 @@ int jffs2_init_security(struct inode *in
+ }
+ rc = do_jffs2_setxattr(inode, JFFS2_XPREFIX_SECURITY, name, value, len, 0);
+
+- kfree(name);
+- kfree(value);
+- return rc;
++ kfree(name);
++ kfree(value);
++ return rc;
+ }
+
+ /* ---- XATTR Handler for "security.*" ----------------- */
+Index: linux-2.6.23.17/fs/jffs2/summary.c
+===================================================================
+--- linux-2.6.23.17.orig/fs/jffs2/summary.c
++++ linux-2.6.23.17/fs/jffs2/summary.c
+@@ -2,10 +2,10 @@
+ * JFFS2 -- Journalling Flash File System, Version 2.
+ *
+ * Copyright © 2004 Ferenc Havasi <havasi@inf.u-szeged.hu>,
+- * Zoltan Sogor <weth@inf.u-szeged.hu>,
+- * Patrik Kluba <pajko@halom.u-szeged.hu>,
+- * University of Szeged, Hungary
+- * 2006 KaiGai Kohei <kaigai@ak.jp.nec.com>
++ * Zoltan Sogor <weth@inf.u-szeged.hu>,
++ * Patrik Kluba <pajko@halom.u-szeged.hu>,
++ * University of Szeged, Hungary
++ * 2006 KaiGai Kohei <kaigai@ak.jp.nec.com>
+ *
+ * For licensing information, see the file 'LICENCE' in this directory.
+ *
+Index: linux-2.6.23.17/fs/jffs2/summary.h
+===================================================================
+--- linux-2.6.23.17.orig/fs/jffs2/summary.h
++++ linux-2.6.23.17/fs/jffs2/summary.h
+@@ -2,9 +2,9 @@
+ * JFFS2 -- Journalling Flash File System, Version 2.
+ *
+ * Copyright © 2004 Ferenc Havasi <havasi@inf.u-szeged.hu>,
+- * Zoltan Sogor <weth@inf.u-szeged.hu>,
+- * Patrik Kluba <pajko@halom.u-szeged.hu>,
+- * University of Szeged, Hungary
++ * Zoltan Sogor <weth@inf.u-szeged.hu>,
++ * Patrik Kluba <pajko@halom.u-szeged.hu>,
++ * University of Szeged, Hungary
+ *
+ * For licensing information, see the file 'LICENCE' in this directory.
+ *
+Index: linux-2.6.23.17/fs/jffs2/wbuf.c
+===================================================================
+--- linux-2.6.23.17.orig/fs/jffs2/wbuf.c
++++ linux-2.6.23.17/fs/jffs2/wbuf.c
+@@ -220,6 +220,47 @@ static struct jffs2_raw_node_ref **jffs2
+ return NULL;
+ }
+
++#ifdef CONFIG_JFFS2_FS_WBUF_VERIFY
++static int jffs2_verify_write(struct jffs2_sb_info *c, unsigned char *buf,
++ uint32_t ofs)
++{
++ int ret;
++ size_t retlen;
++ char *eccstr;
++
++ ret = c->mtd->read(c->mtd, ofs, c->wbuf_pagesize, &retlen, c->wbuf_verify);
++ if (ret && ret != -EUCLEAN && ret != -EBADMSG) {
++ printk(KERN_WARNING "jffs2_verify_write(): Read back of page at %08x failed: %d\n", c->wbuf_ofs, ret);
++ return ret;
++ } else if (retlen != c->wbuf_pagesize) {
++ printk(KERN_WARNING "jffs2_verify_write(): Read back of page at %08x gave short read: %zd not %d.\n", ofs, retlen, c->wbuf_pagesize);
++ return -EIO;
++ }
++ if (!memcmp(buf, c->wbuf_verify, c->wbuf_pagesize))
++ return 0;
++
++ if (ret == -EUCLEAN)
++ eccstr = "corrected";
++ else if (ret == -EBADMSG)
++ eccstr = "correction failed";
++ else
++ eccstr = "OK or unused";
++
++ printk(KERN_WARNING "Write verify error (ECC %s) at %08x. Wrote:\n",
++ eccstr, c->wbuf_ofs);
++ print_hex_dump(KERN_WARNING, "", DUMP_PREFIX_OFFSET, 16, 1,
++ c->wbuf, c->wbuf_pagesize, 0);
++
++ printk(KERN_WARNING "Read back:\n");
++ print_hex_dump(KERN_WARNING, "", DUMP_PREFIX_OFFSET, 16, 1,
++ c->wbuf_verify, c->wbuf_pagesize, 0);
++
++ return -EIO;
++}
++#else
++#define jffs2_verify_write(c,b,o) (0)
++#endif
++
+ /* Recover from failure to write wbuf. Recover the nodes up to the
+ * wbuf, not the one which we were starting to try to write. */
+
+@@ -380,7 +421,7 @@ static void jffs2_wbuf_recover(struct jf
+ ret = c->mtd->write(c->mtd, ofs, towrite, &retlen,
+ rewrite_buf);
+
+- if (ret || retlen != towrite) {
++ if (ret || retlen != towrite || jffs2_verify_write(c, rewrite_buf, ofs)) {
+ /* Argh. We tried. Really we did. */
+ printk(KERN_CRIT "Recovery of wbuf failed due to a second write error\n");
+ kfree(buf);
+@@ -587,15 +628,16 @@ static int __jffs2_flush_wbuf(struct jff
+
+ ret = c->mtd->write(c->mtd, c->wbuf_ofs, c->wbuf_pagesize, &retlen, c->wbuf);
+
+- if (ret || retlen != c->wbuf_pagesize) {
+- if (ret)
+- printk(KERN_WARNING "jffs2_flush_wbuf(): Write failed with %d\n",ret);
+- else {
+- printk(KERN_WARNING "jffs2_flush_wbuf(): Write was short: %zd instead of %d\n",
+- retlen, c->wbuf_pagesize);
+- ret = -EIO;
+- }
+-
++ if (ret) {
++ printk(KERN_WARNING "jffs2_flush_wbuf(): Write failed with %d\n", ret);
++ goto wfail;
++ } else if (retlen != c->wbuf_pagesize) {
++ printk(KERN_WARNING "jffs2_flush_wbuf(): Write was short: %zd instead of %d\n",
++ retlen, c->wbuf_pagesize);
++ ret = -EIO;
++ goto wfail;
++ } else if ((ret = jffs2_verify_write(c, c->wbuf, c->wbuf_ofs))) {
++ wfail:
+ jffs2_wbuf_recover(c);
+
+ return ret;
+@@ -966,8 +1008,8 @@ exit:
+
+ #define NR_OOB_SCAN_PAGES 4
+
+-/* For historical reasons we use only 12 bytes for OOB clean marker */
+-#define OOB_CM_SIZE 12
++/* For historical reasons we use only 8 bytes for OOB clean marker */
++#define OOB_CM_SIZE 8
+
+ static const struct jffs2_unknown_node oob_cleanmarker =
+ {
+@@ -1021,8 +1063,8 @@ int jffs2_check_oob_empty(struct jffs2_s
+ /*
+ * Check for a valid cleanmarker.
+ * Returns: 0 if a valid cleanmarker was found
+- * 1 if no cleanmarker was found
+- * negative error code if an error occurred
++ * 1 if no cleanmarker was found
++ * negative error code if an error occurred
+ */
+ int jffs2_check_nand_cleanmarker(struct jffs2_sb_info *c,
+ struct jffs2_eraseblock *jeb)
+@@ -1138,11 +1180,22 @@ int jffs2_nand_flash_setup(struct jffs2_
+ return -ENOMEM;
+ }
+
++#ifdef CONFIG_JFFS2_FS_WBUF_VERIFY
++ c->wbuf_verify = kmalloc(c->wbuf_pagesize, GFP_KERNEL);
++ if (!c->wbuf_verify) {
++ kfree(c->oobbuf);
++ kfree(c->wbuf);
++ return -ENOMEM;
++ }
++#endif
+ return 0;
+ }
+
+ void jffs2_nand_flash_cleanup(struct jffs2_sb_info *c)
+ {
++#ifdef CONFIG_JFFS2_FS_WBUF_VERIFY
++ kfree(c->wbuf_verify);
++#endif
+ kfree(c->wbuf);
+ kfree(c->oobbuf);
+ }
+Index: linux-2.6.23.17/fs/jffs2/xattr.h
+===================================================================
+--- linux-2.6.23.17.orig/fs/jffs2/xattr.h
++++ linux-2.6.23.17/fs/jffs2/xattr.h
+@@ -75,7 +75,7 @@ extern void jffs2_build_xattr_subsystem(
+ extern void jffs2_clear_xattr_subsystem(struct jffs2_sb_info *c);
+
+ extern struct jffs2_xattr_datum *jffs2_setup_xattr_datum(struct jffs2_sb_info *c,
+- uint32_t xid, uint32_t version);
++ uint32_t xid, uint32_t version);
+
+ extern void jffs2_xattr_delete_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache *ic);
+ extern void jffs2_xattr_free_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache *ic);
+Index: linux-2.6.23.17/fs/jffs2/xattr_user.c
+===================================================================
+--- linux-2.6.23.17.orig/fs/jffs2/xattr_user.c
++++ linux-2.6.23.17/fs/jffs2/xattr_user.c
+@@ -17,7 +17,7 @@
+ #include "nodelist.h"
+
+ static int jffs2_user_getxattr(struct inode *inode, const char *name,
+- void *buffer, size_t size)
++ void *buffer, size_t size)
+ {
+ if (!strcmp(name, ""))
+ return -EINVAL;
+@@ -25,7 +25,7 @@ static int jffs2_user_getxattr(struct in
+ }
+
+ static int jffs2_user_setxattr(struct inode *inode, const char *name, const void *buffer,
+- size_t size, int flags)
++ size_t size, int flags)
+ {
+ if (!strcmp(name, ""))
+ return -EINVAL;
+Index: linux-2.6.23.17/include/asm-i386/geode.h
+===================================================================
+--- linux-2.6.23.17.orig/include/asm-i386/geode.h
++++ linux-2.6.23.17/include/asm-i386/geode.h
+@@ -135,6 +135,55 @@ static inline void geode_gpio_event_pme(
+ geode_gpio_setup_event(gpio, pair, 1);
+ }
+
++/* MFGPT */
++
++#define MFGPT_TIMER_ANY -1
++
++#define MFGPT_DOMAIN_WORKING 1
++#define MFGPT_DOMAIN_STANDBY 2
++#define MFGPT_DOMAIN_ANY (MFGPT_DOMAIN_WORKING | MFGPT_DOMAIN_STANDBY)
++
++#define MFGPT_CMP1 0
++#define MFGPT_CMP2 1
++
++#define MFGPT_EVENT_IRQ 0
++#define MFGPT_EVENT_NMI 1
++#define MFGPT_EVENT_RESET 3
++
++#define MFGPT_REG_CMP1 0
++#define MFGPT_REG_CMP2 2
++#define MFGPT_REG_COUNTER 4
++#define MFGPT_REG_SETUP 6
++
++#define MFGPT_SETUP_CNTEN (1 << 15)
++#define MFGPT_SETUP_CMP2 (1 << 14)
++#define MFGPT_SETUP_CMP1 (1 << 13)
++#define MFGPT_SETUP_SETUP (1 << 12)
++#define MFGPT_SETUP_STOPEN (1 << 11)
++#define MFGPT_SETUP_EXTEN (1 << 10)
++#define MFGPT_SETUP_REVEN (1 << 5)
++#define MFGPT_SETUP_CLKSEL (1 << 4)
++
++static inline void geode_mfgpt_write(int timer, u16 reg, u16 value)
++{
++ u32 base = geode_get_dev_base(GEODE_DEV_MFGPT);
++ outw(value, base + reg + (timer * 8));
++}
++
++static inline u16 geode_mfgpt_read(int timer, u16 reg)
++{
++ u32 base = geode_get_dev_base(GEODE_DEV_MFGPT);
++ return inw(base + reg + (timer * 8));
++}
++
++extern int __init geode_mfgpt_detect(void);
++extern int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable);
++extern int geode_mfgpt_set_irq(int timer, int cmp, int irq, int enable);
++extern int geode_mfgpt_alloc_timer(int timer, int domain, struct module *owner);
++
++#define geode_mfgpt_setup_irq(t,c,i) geode_mfgpt_set_irq((t),(c),(i),1)
++#define geode_mfgpt_release_irq(t,c,i) geode_mfgpt_set_irq((t),(c),(i),0)
++
+ /* Specific geode tests */
+
+ static inline int is_geode_gx(void)
+Index: linux-2.6.23.17/include/asm-i386/setup.h
+===================================================================
+--- linux-2.6.23.17.orig/include/asm-i386/setup.h
++++ linux-2.6.23.17/include/asm-i386/setup.h
+@@ -24,6 +24,7 @@
+ #define OLD_CL_BASE_ADDR 0x90000
+ #define OLD_CL_OFFSET 0x90022
+ #define NEW_CL_POINTER 0x228 /* Relative to real mode data */
++#define OFW_INFO_OFFSET 0xb0 /* Relative to real mode data */
+
+ #ifndef __ASSEMBLY__
+
+Index: linux-2.6.23.17/include/linux/console.h
+===================================================================
+--- linux-2.6.23.17.orig/include/linux/console.h
++++ linux-2.6.23.17/include/linux/console.h
+@@ -121,14 +121,11 @@ extern void console_stop(struct console
+ extern void console_start(struct console *);
+ extern int is_console_locked(void);
+
+-#ifndef CONFIG_DISABLE_CONSOLE_SUSPEND
++extern int serial_console_suspend_enabled;
++
+ /* Suspend and resume console messages over PM events */
+ extern void suspend_console(void);
+ extern void resume_console(void);
+-#else
+-static inline void suspend_console(void) {}
+-static inline void resume_console(void) {}
+-#endif /* CONFIG_DISABLE_CONSOLE_SUSPEND */
+
+ int mda_console_init(void);
+ void prom_con_init(void);
+Index: linux-2.6.23.17/include/linux/fb.h
+===================================================================
+--- linux-2.6.23.17.orig/include/linux/fb.h
++++ linux-2.6.23.17/include/linux/fb.h
+@@ -664,6 +664,12 @@ struct fb_ops {
+ /* restore saved state */
+ void (*fb_restore_state)(struct fb_info *info);
+
++ /* Shut down the graphics engine to save power */
++ int (*fb_powerdown)(struct fb_info *info);
++
++ /* Power it back up */
++ int (*fb_powerup)(struct fb_info *info);
++
+ /* get capability given var */
+ void (*fb_get_caps)(struct fb_info *info, struct fb_blit_caps *caps,
+ struct fb_var_screeninfo *var);
+@@ -943,6 +949,9 @@ extern int fb_get_color_depth(struct fb_
+ extern int fb_get_options(char *name, char **option);
+ extern int fb_new_modelist(struct fb_info *info);
+
++extern int fb_powerdown(struct fb_info *info);
++extern int fb_powerup(struct fb_info *info);
++
+ extern struct fb_info *registered_fb[FB_MAX];
+ extern int num_registered_fb;
+ extern struct class *fb_class;
+Index: linux-2.6.23.17/include/linux/mtd/onenand.h
+===================================================================
+--- linux-2.6.23.17.orig/include/linux/mtd/onenand.h
++++ linux-2.6.23.17/include/linux/mtd/onenand.h
+@@ -60,6 +60,7 @@ struct onenand_bufferram {
+ * @erase_shift: [INTERN] number of address bits in a block
+ * @page_shift: [INTERN] number of address bits in a page
+ * @page_mask: [INTERN] a page per block mask
++ * @writesize: [INTERN] a real page size
+ * @bufferram_index: [INTERN] BufferRAM index
+ * @bufferram: [INTERN] BufferRAM info
+ * @readw: [REPLACEABLE] hardware specific function for read short
+@@ -100,6 +101,7 @@ struct onenand_chip {
+ unsigned int erase_shift;
+ unsigned int page_shift;
+ unsigned int page_mask;
++ unsigned int writesize;
+
+ unsigned int bufferram_index;
+ struct onenand_bufferram bufferram[MAX_BUFFERRAM];
+@@ -140,6 +142,8 @@ struct onenand_chip {
+ #define ONENAND_NEXT_BUFFERRAM(this) (this->bufferram_index ^ 1)
+ #define ONENAND_SET_NEXT_BUFFERRAM(this) (this->bufferram_index ^= 1)
+ #define ONENAND_SET_PREV_BUFFERRAM(this) (this->bufferram_index ^= 1)
++#define ONENAND_SET_BUFFERRAM0(this) (this->bufferram_index = 0)
++#define ONENAND_SET_BUFFERRAM1(this) (this->bufferram_index = 1)
+
+ #define ONENAND_GET_SYS_CFG1(this) \
+ (this->read_word(this->base + ONENAND_REG_SYS_CFG1))
+@@ -149,6 +153,13 @@ struct onenand_chip {
+ #define ONENAND_IS_DDP(this) \
+ (this->device_id & ONENAND_DEVICE_IS_DDP)
+
++#ifdef CONFIG_MTD_ONENAND_2X_PROGRAM
++#define ONENAND_IS_2PLANE(this) \
++ (this->options & ONENAND_HAS_2PLANE)
++#else
++#define ONENAND_IS_2PLANE(this) (0)
++#endif
++
+ /* Check byte access in OneNAND */
+ #define ONENAND_CHECK_BYTE_ACCESS(addr) (addr & 0x1)
+
+@@ -157,6 +168,7 @@ struct onenand_chip {
+ */
+ #define ONENAND_HAS_CONT_LOCK (0x0001)
+ #define ONENAND_HAS_UNLOCK_ALL (0x0002)
++#define ONENAND_HAS_2PLANE (0x0004)
+ #define ONENAND_PAGEBUF_ALLOC (0x1000)
+ #define ONENAND_OOBBUF_ALLOC (0x2000)
+
+Index: linux-2.6.23.17/include/linux/mtd/onenand_regs.h
+===================================================================
+--- linux-2.6.23.17.orig/include/linux/mtd/onenand_regs.h
++++ linux-2.6.23.17/include/linux/mtd/onenand_regs.h
+@@ -74,6 +74,8 @@
+
+ #define ONENAND_DEVICE_DENSITY_512Mb (0x002)
+ #define ONENAND_DEVICE_DENSITY_1Gb (0x003)
++#define ONENAND_DEVICE_DENSITY_2Gb (0x004)
++#define ONENAND_DEVICE_DENSITY_4Gb (0x005)
+
+ /*
+ * Version ID Register F002h (R)
+@@ -111,6 +113,8 @@
+ #define ONENAND_CMD_READOOB (0x13)
+ #define ONENAND_CMD_PROG (0x80)
+ #define ONENAND_CMD_PROGOOB (0x1A)
++#define ONENAND_CMD_2X_PROG (0x7D)
++#define ONENAND_CMD_2X_CACHE_PROG (0x7F)
+ #define ONENAND_CMD_UNLOCK (0x23)
+ #define ONENAND_CMD_LOCK (0x2A)
+ #define ONENAND_CMD_LOCK_TIGHT (0x2C)
+Index: linux-2.6.23.17/include/linux/vt_kern.h
+===================================================================
+--- linux-2.6.23.17.orig/include/linux/vt_kern.h
++++ linux-2.6.23.17/include/linux/vt_kern.h
+@@ -95,4 +95,23 @@ struct vt_spawn_console {
+ };
+ extern struct vt_spawn_console vt_spawn_con;
+
++/* A notifier list for console events */
++extern struct raw_notifier_head console_notifier_list;
++
++/* Called when the FG console switches to KD_TEXT mode */
++#define CONSOLE_EVENT_SWITCH_TEXT 0x01
++
++/* Called when the FG console switches to KD_GRAPHICS mode */
++#define CONSOLE_EVENT_SWITCH_GRAPHICS 0x02
++
++static inline int console_event_register(struct notifier_block *n)
++{
++ return raw_notifier_chain_register(&console_notifier_list, n);
++}
++
++static inline int console_event_unregister(struct notifier_block *n)
++{
++ return raw_notifier_chain_unregister(&console_notifier_list, n);
++}
++
+ #endif /* _VT_KERN_H */
+Index: linux-2.6.23.17/kernel/power/console.c
+===================================================================
+--- linux-2.6.23.17.orig/kernel/power/console.c
++++ linux-2.6.23.17/kernel/power/console.c
+@@ -9,7 +9,7 @@
+ #include <linux/console.h>
+ #include "power.h"
+
+-#if defined(CONFIG_VT) && defined(CONFIG_VT_CONSOLE)
++#if defined(CONFIG_VT) && defined(CONFIG_VT_CONSOLE) && !defined(CONFIG_DISABLE_SUSPEND_VT_SWITCH)
+ #define SUSPEND_CONSOLE (MAX_NR_CONSOLES-1)
+
+ static int orig_fgconsole, orig_kmsg;
--- /dev/null
+Index: linux-2.6.23.17/include/sound/ac97_codec.h
+===================================================================
+--- linux-2.6.23.17.orig/include/sound/ac97_codec.h
++++ linux-2.6.23.17/include/sound/ac97_codec.h
+@@ -281,10 +281,12 @@
+ /* specific - Analog Devices */
+ #define AC97_AD_TEST 0x5a /* test register */
+ #define AC97_AD_TEST2 0x5c /* undocumented test register 2 */
++#define AC97_AD_HPFD_SHIFT 12 /* High Pass Filter Disable */
+ #define AC97_AD_CODEC_CFG 0x70 /* codec configuration */
+ #define AC97_AD_JACK_SPDIF 0x72 /* Jack Sense & S/PDIF */
+ #define AC97_AD_SERIAL_CFG 0x74 /* Serial Configuration */
+ #define AC97_AD_MISC 0x76 /* Misc Control Bits */
++#define AC97_AD_VREFD_SHIFT 2 /* V_REFOUT Disable (AD1888) */
+
+ /* specific - Cirrus Logic */
+ #define AC97_CSR_ACMODE 0x5e /* AC Mode Register */
+Index: linux-2.6.23.17/sound/pci/ac97/ac97_codec.c
+===================================================================
+--- linux-2.6.23.17.orig/sound/pci/ac97/ac97_codec.c
++++ linux-2.6.23.17/sound/pci/ac97/ac97_codec.c
+@@ -49,7 +49,7 @@ module_param(enable_loopback, bool, 0444
+ MODULE_PARM_DESC(enable_loopback, "Enable AC97 ADC/DAC Loopback Control");
+
+ #ifdef CONFIG_SND_AC97_POWER_SAVE
+-static int power_save;
++static int power_save = 1;
+ module_param(power_save, bool, 0644);
+ MODULE_PARM_DESC(power_save, "Enable AC97 power-saving control");
+ #endif
+Index: linux-2.6.23.17/sound/pci/ac97/ac97_patch.c
+===================================================================
+--- linux-2.6.23.17.orig/sound/pci/ac97/ac97_patch.c
++++ linux-2.6.23.17/sound/pci/ac97/ac97_patch.c
+@@ -1973,8 +1973,9 @@ static const struct snd_kcontrol_new snd
+ .get = snd_ac97_ad1888_lohpsel_get,
+ .put = snd_ac97_ad1888_lohpsel_put
+ },
+- AC97_SINGLE("V_REFOUT Enable", AC97_AD_MISC, 2, 1, 1),
+- AC97_SINGLE("High Pass Filter Enable", AC97_AD_TEST2, 12, 1, 1),
++ AC97_SINGLE("V_REFOUT Enable", AC97_AD_MISC, AC97_AD_VREFD_SHIFT, 1, 1),
++ AC97_SINGLE("High Pass Filter Enable", AC97_AD_TEST2,
++ AC97_AD_HPFD_SHIFT, 1, 1),
+ AC97_SINGLE("Spread Front to Surround and Center/LFE", AC97_AD_MISC, 7, 1, 0),
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+Index: linux-2.6.23.17/sound/pci/cs5535audio/Makefile
+===================================================================
+--- linux-2.6.23.17.orig/sound/pci/cs5535audio/Makefile
++++ linux-2.6.23.17/sound/pci/cs5535audio/Makefile
+@@ -8,5 +8,9 @@ ifeq ($(CONFIG_PM),y)
+ snd-cs5535audio-objs += cs5535audio_pm.o
+ endif
+
++ifdef CONFIG_OLPC
++snd-cs5535audio-objs += cs5535audio_olpc.o
++endif
++
+ # Toplevel Module Dependency
+ obj-$(CONFIG_SND_CS5535AUDIO) += snd-cs5535audio.o
+Index: linux-2.6.23.17/sound/pci/cs5535audio/cs5535audio.c
+===================================================================
+--- linux-2.6.23.17.orig/sound/pci/cs5535audio/cs5535audio.c
++++ linux-2.6.23.17/sound/pci/cs5535audio/cs5535audio.c
+@@ -145,7 +145,7 @@ static unsigned short snd_cs5535audio_ac
+ return snd_cs5535audio_codec_read(cs5535au, reg);
+ }
+
+-static int snd_cs5535audio_mixer(struct cs5535audio *cs5535au)
++static int __devinit snd_cs5535audio_mixer(struct cs5535audio *cs5535au)
+ {
+ struct snd_card *card = cs5535au->card;
+ struct snd_ac97_bus *pbus;
+@@ -160,10 +160,14 @@ static int snd_cs5535audio_mixer(struct
+ return err;
+
+ memset(&ac97, 0, sizeof(ac97));
+- ac97.scaps = AC97_SCAP_AUDIO|AC97_SCAP_SKIP_MODEM;
++ ac97.scaps = AC97_SCAP_AUDIO | AC97_SCAP_SKIP_MODEM
++ | AC97_SCAP_POWER_SAVE;
+ ac97.private_data = cs5535au;
+ ac97.pci = cs5535au->pci;
+
++ /* olpc_prequirks is dummied out if not olpc */
++ olpc_prequirks(card, &ac97);
++
+ if ((err = snd_ac97_mixer(pbus, &ac97, &cs5535au->ac97)) < 0) {
+ snd_printk(KERN_ERR "mixer failed\n");
+ return err;
+@@ -171,6 +175,12 @@ static int snd_cs5535audio_mixer(struct
+
+ snd_ac97_tune_hardware(cs5535au->ac97, ac97_quirks, ac97_quirk);
+
++ /* olpc_quirks is dummied out if not olpc */
++ if (( err = olpc_quirks(card, cs5535au->ac97)) < 0) {
++ snd_printk(KERN_ERR "olpc quirks failed\n");
++ return err;
++ }
++
+ return 0;
+ }
+
+@@ -206,7 +216,6 @@ static void process_bm1_irq(struct cs553
+ static irqreturn_t snd_cs5535audio_interrupt(int irq, void *dev_id)
+ {
+ u16 acc_irq_stat;
+- u8 bm_stat;
+ unsigned char count;
+ struct cs5535audio *cs5535au = dev_id;
+
+@@ -217,7 +226,7 @@ static irqreturn_t snd_cs5535audio_inter
+
+ if (!acc_irq_stat)
+ return IRQ_NONE;
+- for (count = 0; count < 10; count++) {
++ for (count = 0; count < 4; count++) {
+ if (acc_irq_stat & (1 << count)) {
+ switch (count) {
+ case IRQ_STS:
+@@ -232,26 +241,9 @@ static irqreturn_t snd_cs5535audio_inter
+ case BM1_IRQ_STS:
+ process_bm1_irq(cs5535au);
+ break;
+- case BM2_IRQ_STS:
+- bm_stat = cs_readb(cs5535au, ACC_BM2_STATUS);
+- break;
+- case BM3_IRQ_STS:
+- bm_stat = cs_readb(cs5535au, ACC_BM3_STATUS);
+- break;
+- case BM4_IRQ_STS:
+- bm_stat = cs_readb(cs5535au, ACC_BM4_STATUS);
+- break;
+- case BM5_IRQ_STS:
+- bm_stat = cs_readb(cs5535au, ACC_BM5_STATUS);
+- break;
+- case BM6_IRQ_STS:
+- bm_stat = cs_readb(cs5535au, ACC_BM6_STATUS);
+- break;
+- case BM7_IRQ_STS:
+- bm_stat = cs_readb(cs5535au, ACC_BM7_STATUS);
+- break;
+ default:
+- snd_printk(KERN_ERR "Unexpected irq src\n");
++ snd_printk(KERN_ERR "Unexpected irq src: "
++ "0x%x\n", acc_irq_stat);
+ break;
+ }
+ }
+Index: linux-2.6.23.17/sound/pci/cs5535audio/cs5535audio.h
+===================================================================
+--- linux-2.6.23.17.orig/sound/pci/cs5535audio/cs5535audio.h
++++ linux-2.6.23.17/sound/pci/cs5535audio/cs5535audio.h
+@@ -16,57 +16,28 @@
+ #define ACC_IRQ_STATUS 0x12
+ #define ACC_BM0_CMD 0x20
+ #define ACC_BM1_CMD 0x28
+-#define ACC_BM2_CMD 0x30
+-#define ACC_BM3_CMD 0x38
+-#define ACC_BM4_CMD 0x40
+-#define ACC_BM5_CMD 0x48
+-#define ACC_BM6_CMD 0x50
+-#define ACC_BM7_CMD 0x58
+ #define ACC_BM0_PRD 0x24
+ #define ACC_BM1_PRD 0x2C
+-#define ACC_BM2_PRD 0x34
+-#define ACC_BM3_PRD 0x3C
+-#define ACC_BM4_PRD 0x44
+-#define ACC_BM5_PRD 0x4C
+-#define ACC_BM6_PRD 0x54
+-#define ACC_BM7_PRD 0x5C
+ #define ACC_BM0_STATUS 0x21
+ #define ACC_BM1_STATUS 0x29
+-#define ACC_BM2_STATUS 0x31
+-#define ACC_BM3_STATUS 0x39
+-#define ACC_BM4_STATUS 0x41
+-#define ACC_BM5_STATUS 0x49
+-#define ACC_BM6_STATUS 0x51
+-#define ACC_BM7_STATUS 0x59
+ #define ACC_BM0_PNTR 0x60
+ #define ACC_BM1_PNTR 0x64
+-#define ACC_BM2_PNTR 0x68
+-#define ACC_BM3_PNTR 0x6C
+-#define ACC_BM4_PNTR 0x70
+-#define ACC_BM5_PNTR 0x74
+-#define ACC_BM6_PNTR 0x78
+-#define ACC_BM7_PNTR 0x7C
++
+ /* acc_codec bar0 reg bits */
+ /* ACC_IRQ_STATUS */
+ #define IRQ_STS 0
+ #define WU_IRQ_STS 1
+ #define BM0_IRQ_STS 2
+ #define BM1_IRQ_STS 3
+-#define BM2_IRQ_STS 4
+-#define BM3_IRQ_STS 5
+-#define BM4_IRQ_STS 6
+-#define BM5_IRQ_STS 7
+-#define BM6_IRQ_STS 8
+-#define BM7_IRQ_STS 9
+ /* ACC_BMX_STATUS */
+ #define EOP (1<<0)
+ #define BM_EOP_ERR (1<<1)
+ /* ACC_BMX_CTL */
+-#define BM_CTL_EN 0x00000001
+-#define BM_CTL_PAUSE 0x00000011
+-#define BM_CTL_DIS 0x00000000
+-#define BM_CTL_BYTE_ORD_LE 0x00000000
+-#define BM_CTL_BYTE_ORD_BE 0x00000100
++#define BM_CTL_EN 0x01
++#define BM_CTL_PAUSE 0x03
++#define BM_CTL_DIS 0x00
++#define BM_CTL_BYTE_ORD_LE 0x00
++#define BM_CTL_BYTE_ORD_BE 0x04
+ /* cs5535 specific ac97 codec register defines */
+ #define CMD_MASK 0xFF00FFFF
+ #define CMD_NEW 0x00010000
+@@ -106,8 +77,8 @@ struct cs5535audio_dma {
+ struct snd_pcm_substream *substream;
+ unsigned int buf_addr, buf_bytes;
+ unsigned int period_bytes, periods;
+- int suspended;
+ u32 saved_prd;
++ int pcm_open_flag;
+ };
+
+ struct cs5535audio {
+@@ -123,8 +94,21 @@ struct cs5535audio {
+ struct cs5535audio_dma dmas[NUM_CS5535AUDIO_DMAS];
+ };
+
++#ifdef CONFIG_PM
+ int snd_cs5535audio_suspend(struct pci_dev *pci, pm_message_t state);
+ int snd_cs5535audio_resume(struct pci_dev *pci);
++#endif
++
++#ifdef CONFIG_OLPC
++void olpc_prequirks(struct snd_card *card, struct snd_ac97_template *ac97) __devinit;
++int olpc_quirks(struct snd_card *card, struct snd_ac97 *ac97) __devinit;
++int olpc_ai_enable(struct snd_ac97 *ac97, u8 val);
++#else
++#define olpc_prequirks(arg,arg2) do {} while (0)
++#define olpc_quirks(arg,arg2) (0)
++#define olpc_ai_enable(a, v) (0)
++#endif
++
+ int __devinit snd_cs5535audio_pcm(struct cs5535audio *cs5535audio);
+
+ #endif /* __SOUND_CS5535AUDIO_H */
+Index: linux-2.6.23.17/sound/pci/cs5535audio/cs5535audio_pcm.c
+===================================================================
+--- linux-2.6.23.17.orig/sound/pci/cs5535audio/cs5535audio_pcm.c
++++ linux-2.6.23.17/sound/pci/cs5535audio/cs5535audio_pcm.c
+@@ -164,6 +164,7 @@ static int cs5535audio_build_dma_packets
+ jmpprd_addr = cpu_to_le32(lastdesc->addr +
+ (sizeof(struct cs5535audio_dma_desc)*periods));
+
++ dma->substream = substream;
+ dma->period_bytes = period_bytes;
+ dma->periods = periods;
+ spin_lock_irq(&cs5535au->reg_lock);
+@@ -241,6 +242,7 @@ static void cs5535audio_clear_dma_packet
+ {
+ snd_dma_free_pages(&dma->desc_buf);
+ dma->desc_buf.area = NULL;
++ dma->substream = NULL;
+ }
+
+ static int snd_cs5535audio_hw_params(struct snd_pcm_substream *substream,
+@@ -260,6 +262,9 @@ static int snd_cs5535audio_hw_params(str
+ err = cs5535audio_build_dma_packets(cs5535au, dma, substream,
+ params_periods(hw_params),
+ params_period_bytes(hw_params));
++ if (!err)
++ dma->pcm_open_flag = 1;
++
+ return err;
+ }
+
+@@ -268,6 +273,15 @@ static int snd_cs5535audio_hw_free(struc
+ struct cs5535audio *cs5535au = snd_pcm_substream_chip(substream);
+ struct cs5535audio_dma *dma = substream->runtime->private_data;
+
++ if (dma->pcm_open_flag) {
++ if (substream == cs5535au->playback_substream)
++ snd_ac97_update_power(cs5535au->ac97,
++ AC97_PCM_FRONT_DAC_RATE, 0);
++ else
++ snd_ac97_update_power(cs5535au->ac97,
++ AC97_PCM_LR_ADC_RATE, 0);
++ dma->pcm_open_flag = 0;
++ }
+ cs5535audio_clear_dma_packets(cs5535au, dma, substream);
+ return snd_pcm_lib_free_pages(substream);
+ }
+@@ -298,14 +312,12 @@ static int snd_cs5535audio_trigger(struc
+ break;
+ case SNDRV_PCM_TRIGGER_RESUME:
+ dma->ops->enable_dma(cs5535au);
+- dma->suspended = 0;
+ break;
+ case SNDRV_PCM_TRIGGER_STOP:
+ dma->ops->disable_dma(cs5535au);
+ break;
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ dma->ops->disable_dma(cs5535au);
+- dma->suspended = 1;
+ break;
+ default:
+ snd_printk(KERN_ERR "unhandled trigger\n");
+@@ -344,6 +356,7 @@ static int snd_cs5535audio_capture_open(
+ int err;
+ struct cs5535audio *cs5535au = snd_pcm_substream_chip(substream);
+ struct snd_pcm_runtime *runtime = substream->runtime;
++ struct snd_ac97 *ac97 = cs5535au->ac97;
+
+ runtime->hw = snd_cs5535audio_capture;
+ cs5535au->capture_substream = substream;
+@@ -352,11 +365,29 @@ static int snd_cs5535audio_capture_open(
+ if ((err = snd_pcm_hw_constraint_integer(runtime,
+ SNDRV_PCM_HW_PARAM_PERIODS)) < 0)
+ return err;
+- return 0;
++
++#ifdef CONFIG_OLPC
++ /* Disable Analog Input */
++ olpc_ai_enable(ac97, 0);
++ /* Enable V_ref bias while recording. */
++ snd_ac97_update_bits(ac97, AC97_AD_MISC, 1<<AC97_AD_VREFD_SHIFT, 0);
++#endif
++ return err;
+ }
+
+ static int snd_cs5535audio_capture_close(struct snd_pcm_substream *substream)
+ {
++#ifdef CONFIG_OLPC
++ struct cs5535audio *cs5535au = snd_pcm_substream_chip(substream);
++ struct snd_ac97 *ac97 = cs5535au->ac97;
++
++ /* Disable Analog Input */
++ olpc_ai_enable(ac97, 0);
++ /* Disable V_ref bias. */
++ snd_ac97_update_bits(ac97, AC97_AD_MISC, 1<<AC97_AD_VREFD_SHIFT,
++ 1<<AC97_AD_VREFD_SHIFT);
++#endif
++
+ return 0;
+ }
+
+Index: linux-2.6.23.17/sound/pci/cs5535audio/cs5535audio_pm.c
+===================================================================
+--- linux-2.6.23.17.orig/sound/pci/cs5535audio/cs5535audio_pm.c
++++ linux-2.6.23.17/sound/pci/cs5535audio/cs5535audio_pm.c
+@@ -64,18 +64,21 @@ int snd_cs5535audio_suspend(struct pci_d
+ int i;
+
+ snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
++ snd_pcm_suspend_all(cs5535au->pcm);
++ snd_ac97_suspend(cs5535au->ac97);
+ for (i = 0; i < NUM_CS5535AUDIO_DMAS; i++) {
+ struct cs5535audio_dma *dma = &cs5535au->dmas[i];
+- if (dma && dma->substream && !dma->suspended)
++ if (dma && dma->substream)
+ dma->saved_prd = dma->ops->read_prd(cs5535au);
+ }
+- snd_pcm_suspend_all(cs5535au->pcm);
+- snd_ac97_suspend(cs5535au->ac97);
+ /* save important regs, then disable aclink in hw */
+ snd_cs5535audio_stop_hardware(cs5535au);
+
++ if (pci_save_state(pci)) {
++ printk(KERN_ERR "cs5535audio: pci_save_state failed!\n");
++ return -EIO;
++ }
+ pci_disable_device(pci);
+- pci_save_state(pci);
+ pci_set_power_state(pci, pci_choose_state(pci, state));
+ return 0;
+ }
+@@ -89,7 +92,12 @@ int snd_cs5535audio_resume(struct pci_de
+ int i;
+
+ pci_set_power_state(pci, PCI_D0);
+- pci_restore_state(pci);
++ if (pci_restore_state(pci) < 0) {
++ printk(KERN_ERR "cs5535audio: pci_restore_state failed, "
++ "disabling device\n");
++ snd_card_disconnect(card);
++ return -EIO;
++ }
+ if (pci_enable_device(pci) < 0) {
+ printk(KERN_ERR "cs5535audio: pci_enable_device failed, "
+ "disabling device\n");
+@@ -112,17 +120,17 @@ int snd_cs5535audio_resume(struct pci_de
+ if (!timeout)
+ snd_printk(KERN_ERR "Failure getting AC Link ready\n");
+
+- /* we depend on ac97 to perform the codec power up */
+- snd_ac97_resume(cs5535au->ac97);
+ /* set up rate regs, dma. actual initiation is done in trig */
+ for (i = 0; i < NUM_CS5535AUDIO_DMAS; i++) {
+ struct cs5535audio_dma *dma = &cs5535au->dmas[i];
+- if (dma && dma->substream && dma->suspended) {
++ if (dma && dma->substream) {
+ dma->substream->ops->prepare(dma->substream);
+ dma->ops->setup_prd(cs5535au, dma->saved_prd);
+ }
+ }
+-
++
++ /* we depend on ac97 to perform the codec power up */
++ snd_ac97_resume(cs5535au->ac97);
+ snd_power_change_state(card, SNDRV_CTL_POWER_D0);
+
+ return 0;
--- /dev/null
+Index: linux-2.6.23.17/include/linux/i2c-id.h
+===================================================================
+--- linux-2.6.23.17.orig/include/linux/i2c-id.h
++++ linux-2.6.23.17/include/linux/i2c-id.h
+@@ -119,6 +119,7 @@
+ #define I2C_DRIVERID_WM8750 90 /* Wolfson WM8750 audio codec */
+ #define I2C_DRIVERID_WM8753 91 /* Wolfson WM8753 audio codec */
+ #define I2C_DRIVERID_LM4857 92 /* LM4857 Audio Amplifier */
++#define I2C_DRIVERID_DCON 93
+
+ #define I2C_DRIVERID_I2CDEV 900
+ #define I2C_DRIVERID_ARP 902 /* SMBus ARP Client */
--- /dev/null
+Index: linux-2.6.23.17/drivers/mtd/devices/block2mtd.c
+===================================================================
+--- linux-2.6.23.17.orig/drivers/mtd/devices/block2mtd.c
++++ linux-2.6.23.17/drivers/mtd/devices/block2mtd.c
+@@ -20,6 +20,8 @@
+ #include <linux/buffer_head.h>
+ #include <linux/mutex.h>
+ #include <linux/mount.h>
++#include <linux/list.h>
++#include <linux/delay.h>
+
+ #define VERSION "$Revision: 1.30 $"
+
+@@ -27,6 +29,12 @@
+ #define ERROR(fmt, args...) printk(KERN_ERR "block2mtd: " fmt "\n" , ## args)
+ #define INFO(fmt, args...) printk(KERN_INFO "block2mtd: " fmt "\n" , ## args)
+
++struct retry {
++ struct list_head list;
++ const char *val;
++};
++
++static LIST_HEAD(retry_list);
+
+ /* Info for the block device */
+ struct block2mtd_dev {
+@@ -38,10 +46,36 @@ struct block2mtd_dev {
+ char devname[0];
+ };
+
++static int block2mtd_setup2(const char *val);
+
+ /* Static info about the MTD, used in cleanup_module */
+ static LIST_HEAD(blkmtd_device_list);
+
++static int add_retry(const char *val)
++{
++ struct retry *r = kmalloc(sizeof(struct retry), GFP_KERNEL);
++
++ INIT_LIST_HEAD(&r->list);
++ r->val = val;
++ list_add(&r->list, &retry_list);
++
++ return 0;
++}
++
++static int __init process_retries(void)
++{
++ struct list_head *p, *tmp;
++
++ list_for_each_safe(p, tmp, &retry_list) {
++ struct retry *r = list_entry(p, struct retry, list);
++ block2mtd_setup2(r->val);
++ msleep(100);
++ list_del(p);
++ kfree(r);
++ }
++ return 0;
++}
++rootfs_initcall(process_retries);
+
+ static struct page *page_read(struct address_space *mapping, int index)
+ {
+@@ -518,7 +552,10 @@ static int block2mtd_setup2(const char *
+ if (token[2] && (strlen(token[2]) + 1 > 80))
+ parse_err("mtd device name too long");
+
+- add_device(name, erase_size, token[2]);
++ if (add_device(name, erase_size, token[2]) == NULL) {
++ add_retry(val);
++ return 0;
++ }
+
+ return 0;
+ }
+@@ -534,8 +571,11 @@ static int block2mtd_setup(const char *v
+ and block2mtd_init() has already been called,
+ we can parse the argument now. */
+
+- if (block2mtd_init_called)
++ if (block2mtd_init_called) {
++ /* if the call failed (e.g. because the device does not exist yet)
++ * then try again just before attempting to mount the rootfs */
+ return block2mtd_setup2(val);
++ }
+
+ /* During early boot stage, we only save the parameters
+ here. We must parse them later: if the param passed
+Index: linux-2.6.23.17/init/do_mounts.c
+===================================================================
+--- linux-2.6.23.17.orig/init/do_mounts.c
++++ linux-2.6.23.17/init/do_mounts.c
+@@ -241,16 +241,8 @@ static int __init fs_names_setup(char *s
+ return 1;
+ }
+
+-static unsigned int __initdata root_delay;
+-static int __init root_delay_setup(char *str)
+-{
+- root_delay = simple_strtoul(str, NULL, 0);
+- return 1;
+-}
+-
+ __setup("rootflags=", root_data_setup);
+ __setup("rootfstype=", fs_names_setup);
+-__setup("rootdelay=", root_delay_setup);
+
+ static void __init get_fs_names(char *page)
+ {
+@@ -426,18 +418,6 @@ void __init prepare_namespace(void)
+ {
+ int is_floppy;
+
+- if (root_delay) {
+- printk(KERN_INFO "Waiting %dsec before mounting root device...\n",
+- root_delay);
+- ssleep(root_delay);
+- }
+-
+- /* wait for the known devices to complete their probing */
+- while (driver_probe_done() != 0)
+- msleep(100);
+-
+- md_run_setup();
+-
+ if (saved_root_name[0]) {
+ root_device_name = saved_root_name;
+ if (!strncmp(root_device_name, "mtd", 3)) {
+Index: linux-2.6.23.17/init/main.c
+===================================================================
+--- linux-2.6.23.17.orig/init/main.c
++++ linux-2.6.23.17/init/main.c
+@@ -65,6 +65,7 @@
+ #ifdef CONFIG_X86_LOCAL_APIC
+ #include <asm/smp.h>
+ #endif
++#include "do_mounts.h"
+
+ /*
+ * This is one of the first .c files built. Error out early if we have compiler
+@@ -662,13 +663,14 @@ static int __init initcall_debug_setup(c
+ __setup("initcall_debug", initcall_debug_setup);
+
+ extern initcall_t __initcall_start[], __initcall_end[];
++extern initcall_t __root_initcall_start[], __root_initcall_end[];
+
+-static void __init do_initcalls(void)
++static void __init do_initcalls(initcall_t *start, initcall_t *end)
+ {
+ initcall_t *call;
+ int count = preempt_count();
+
+- for (call = __initcall_start; call < __initcall_end; call++) {
++ for (call = start; call < end; call++) {
+ ktime_t t0, t1, delta;
+ char *msg = NULL;
+ char msgbuf[40];
+@@ -737,7 +739,7 @@ static void __init do_basic_setup(void)
+ usermodehelper_init();
+ driver_init();
+ init_irq_proc();
+- do_initcalls();
++ do_initcalls(__initcall_start, __initcall_end);
+ }
+
+ static int __initdata nosoftlockup;
+@@ -810,6 +812,14 @@ static int noinline init_post(void)
+ panic("No init found. Try passing init= option to kernel.");
+ }
+
++static unsigned int __initdata root_delay;
++static int __init root_delay_setup(char *str)
++{
++ root_delay = simple_strtoul(str, NULL, 0);
++ return 1;
++}
++__setup("rootdelay=", root_delay_setup);
++
+ static int __init kernel_init(void * unused)
+ {
+ lock_kernel();
+@@ -851,6 +861,17 @@ static int __init kernel_init(void * unu
+
+ if (sys_access((const char __user *) ramdisk_execute_command, 0) != 0) {
+ ramdisk_execute_command = NULL;
++ if (root_delay) {
++ printk(KERN_INFO "Waiting %dsec before mounting root device...\n",
++ root_delay);
++ ssleep(root_delay);
++ }
++ /* wait for the known devices to complete their probing */
++ while (driver_probe_done() != 0)
++ msleep(100);
++ md_run_setup();
++ do_initcalls(__root_initcall_start, __root_initcall_end);
++
+ prepare_namespace();
+ }
+
+Index: linux-2.6.23.17/arch/i386/kernel/vmlinux.lds.S
+===================================================================
+--- linux-2.6.23.17.orig/arch/i386/kernel/vmlinux.lds.S
++++ linux-2.6.23.17/arch/i386/kernel/vmlinux.lds.S
+@@ -146,6 +146,11 @@ SECTIONS
+ INITCALLS
+ __initcall_end = .;
+ }
++ .root_initcall.init : AT(ADDR(.root_initcall.init) - LOAD_OFFSET) {
++ __root_initcall_start = .;
++ INITCALLS_ROOT
++ __root_initcall_end = .;
++ }
+ .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
+ __con_initcall_start = .;
+ *(.con_initcall.init)
+Index: linux-2.6.23.17/include/asm-generic/vmlinux.lds.h
+===================================================================
+--- linux-2.6.23.17.orig/include/asm-generic/vmlinux.lds.h
++++ linux-2.6.23.17/include/asm-generic/vmlinux.lds.h
+@@ -243,12 +243,14 @@
+ *(.initcall4s.init) \
+ *(.initcall5.init) \
+ *(.initcall5s.init) \
+- *(.initcallrootfs.init) \
+ *(.initcall6.init) \
+ *(.initcall6s.init) \
+ *(.initcall7.init) \
+ *(.initcall7s.init)
+
++#define INITCALLS_ROOT \
++ *(.initcallrootfs.init)
++
+ #define PERCPU(align) \
+ . = ALIGN(align); \
+ __per_cpu_start = .; \
--- /dev/null
+diff -urN linux-2.6.26.orig/arch/x86/kernel/vmlinux_32.lds.S linux-2.6.26/arch/x86/kernel/vmlinux_32.lds.S
+--- linux-2.6.26.orig/arch/x86/kernel/vmlinux_32.lds.S 2008-08-13 03:51:12.000000000 +0200
++++ linux-2.6.26/arch/x86/kernel/vmlinux_32.lds.S 2008-08-13 04:08:18.000000000 +0200
+@@ -144,6 +144,12 @@
+ INITCALLS
+ __initcall_end = .;
+ }
++ .root_initcall.init : AT(ADDR(.root_initcall.init) - LOAD_OFFSET) {
++ __root_initcall_start = .;
++ INITCALLS_ROOT
++ __root_initcall_end = .;
++ }
++
+ .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
+ __con_initcall_start = .;
+ *(.con_initcall.init)
+diff -urN linux-2.6.26.orig/drivers/mtd/devices/block2mtd.c linux-2.6.26/drivers/mtd/devices/block2mtd.c
+--- linux-2.6.26.orig/drivers/mtd/devices/block2mtd.c 2008-08-13 03:51:05.000000000 +0200
++++ linux-2.6.26/drivers/mtd/devices/block2mtd.c 2008-08-13 04:06:43.000000000 +0200
+@@ -20,6 +20,8 @@
+ #include <linux/buffer_head.h>
+ #include <linux/mutex.h>
+ #include <linux/mount.h>
++#include <linux/list.h>
++#include <linux/delay.h>
+
+ #define VERSION "$Revision: 1.30 $"
+
+@@ -27,6 +29,12 @@
+ #define ERROR(fmt, args...) printk(KERN_ERR "block2mtd: " fmt "\n" , ## args)
+ #define INFO(fmt, args...) printk(KERN_INFO "block2mtd: " fmt "\n" , ## args)
+
++struct retry {
++ struct list_head list;
++ const char *val;
++};
++
++static LIST_HEAD(retry_list);
+
+ /* Info for the block device */
+ struct block2mtd_dev {
+@@ -38,10 +46,34 @@
+ char devname[0];
+ };
+
++static int block2mtd_setup2(const char *val);
+
+ /* Static info about the MTD, used in cleanup_module */
+ static LIST_HEAD(blkmtd_device_list);
+
++static int add_retry(const char *val) {
++ struct retry *r = kmalloc(sizeof(struct retry), GFP_KERNEL);
++
++ INIT_LIST_HEAD(&r->list);
++ r->val = val;
++ list_add(&r->list, &retry_list);
++
++ return 0;
++}
++
++static int __init process_retries(void) {
++ struct list_head *p, *tmp;
++
++ list_for_each_safe(p, tmp, &retry_list) {
++ struct retry *r = list_entry(p, struct retry, list);
++ block2mtd_setup2(r->val);
++ msleep(100);
++ list_del(p);
++ kfree(r);
++ }
++ return 0;
++}
++rootfs_initcall(process_retries);
+
+ static struct page *page_read(struct address_space *mapping, int index)
+ {
+@@ -517,7 +549,9 @@
+ if (token[2] && (strlen(token[2]) + 1 > 80))
+ parse_err("mtd device name too long");
+
+- add_device(name, erase_size, token[2]);
++ if (add_device(name, erase_size, token[2]) == NULL) {
++ add_retry(val);
++ }
+
+ return 0;
+ }
+diff -urN linux-2.6.26.orig/include/asm-generic/vmlinux.lds.h linux-2.6.26/include/asm-generic/vmlinux.lds.h
+--- linux-2.6.26.orig/include/asm-generic/vmlinux.lds.h 2008-08-13 03:51:08.000000000 +0200
++++ linux-2.6.26/include/asm-generic/vmlinux.lds.h 2008-08-13 04:09:04.000000000 +0200
+@@ -338,12 +338,14 @@
+ *(.initcall4s.init) \
+ *(.initcall5.init) \
+ *(.initcall5s.init) \
+- *(.initcallrootfs.init) \
+ *(.initcall6.init) \
+ *(.initcall6s.init) \
+ *(.initcall7.init) \
+ *(.initcall7s.init)
+
++#define INITCALLS_ROOT \
++ *(.initcallrootfs.init)
++
+ #define PERCPU(align) \
+ . = ALIGN(align); \
+ __per_cpu_start = .; \
+diff -urN linux-2.6.26.orig/init/do_mounts.c linux-2.6.26/init/do_mounts.c
+--- linux-2.6.26.orig/init/do_mounts.c 2008-08-13 03:51:11.000000000 +0200
++++ linux-2.6.26/init/do_mounts.c 2008-08-13 04:00:22.000000000 +0200
+@@ -173,16 +173,8 @@
+ return 1;
+ }
+
+-static unsigned int __initdata root_delay;
+-static int __init root_delay_setup(char *str)
+-{
+- root_delay = simple_strtoul(str, NULL, 0);
+- return 1;
+-}
+-
+ __setup("rootflags=", root_data_setup);
+ __setup("rootfstype=", fs_names_setup);
+-__setup("rootdelay=", root_delay_setup);
+
+ static void __init get_fs_names(char *page)
+ {
+@@ -358,18 +350,6 @@
+ {
+ int is_floppy;
+
+- if (root_delay) {
+- printk(KERN_INFO "Waiting %dsec before mounting root device...\n",
+- root_delay);
+- ssleep(root_delay);
+- }
+-
+- /* wait for the known devices to complete their probing */
+- while (driver_probe_done() != 0)
+- msleep(100);
+-
+- md_run_setup();
+-
+ if (saved_root_name[0]) {
+ root_device_name = saved_root_name;
+ if (!strncmp(root_device_name, "mtd", 3)) {
+diff -urN linux-2.6.26.orig/init/main.c linux-2.6.26/init/main.c
+--- linux-2.6.26.orig/init/main.c 2008-08-13 03:51:11.000000000 +0200
++++ linux-2.6.26/init/main.c 2008-08-13 04:06:01.000000000 +0200
+@@ -70,6 +70,7 @@
+ #ifdef CONFIG_X86_LOCAL_APIC
+ #include <asm/smp.h>
+ #endif
++#include "do_mounts.h"
+
+ /*
+ * This is one of the first .c files built. Error out early if we have compiler
+@@ -737,12 +738,13 @@
+
+
+ extern initcall_t __initcall_start[], __initcall_end[];
++extern initcall_t __root_initcall_start[], __root_initcall_end[];
+
+-static void __init do_initcalls(void)
++static void __init do_initcalls(initcall_t *start, initcall_t *end)
+ {
+ initcall_t *call;
+
+- for (call = __initcall_start; call < __initcall_end; call++)
++ for (call = start; call < end; call++)
+ do_one_initcall(*call);
+
+ /* Make sure there is no pending stuff from the initcall sequence */
+@@ -763,7 +765,7 @@
+ usermodehelper_init();
+ driver_init();
+ init_irq_proc();
+- do_initcalls();
++ do_initcalls(__initcall_start, __initcall_end);
+ }
+
+ static int __initdata nosoftlockup;
+@@ -835,6 +837,13 @@
+ panic("No init found. Try passing init= option to kernel.");
+ }
+
++static unsigned int __initdata root_delay;
++static int __init root_delay_setup(char *str)
++{
++ root_delay = simple_strtoul(str, NULL, 0);
++ return 1;
++}
++__setup("rootdelay=", root_delay_setup);
+ static int __init kernel_init(void * unused)
+ {
+ lock_kernel();
+@@ -875,7 +884,16 @@
+
+ if (sys_access((const char __user *) ramdisk_execute_command, 0) != 0) {
+ ramdisk_execute_command = NULL;
+- prepare_namespace();
++ if (root_delay) {
++ printk(KERN_INFO "Waiting %desc before mounting root device...\n",
++ root_delay);
++ ssleep(root_delay);
++ }
++ while (driver_probe_done() != 0)
++ msleep(100);
++ md_run_setup();
++ do_initcalls(__root_initcall_start, __root_initcall_end);
++ prepare_namespace();
+ }
+
+ /*
+++ /dev/null
-Index: linux-2.6.23.17/arch/i386/Kconfig
-===================================================================
---- linux-2.6.23.17.orig/arch/i386/Kconfig
-+++ linux-2.6.23.17/arch/i386/Kconfig
-@@ -796,6 +796,15 @@ config SECCOMP
-
- If unsure, say Y. Only embedded should say N here.
-
-+config VGA_NOPROBE
-+ bool "Don't probe VGA at boot" if EMBEDDED
-+ default n
-+ help
-+ Saying Y here will cause the kernel to not probe VGA at boot time.
-+ This will break everything that depends on the probed screen
-+ data. Say N here unless you are absolutely sure this is what you
-+ want.
-+
- source kernel/Kconfig.hz
-
- config KEXEC
-@@ -1120,6 +1129,9 @@ config PCI_GODIRECT
- config PCI_GOANY
- bool "Any"
-
-+config PCI_GOOLPC
-+ bool "OLPC"
-+
- endchoice
-
- config PCI_BIOS
-@@ -1129,7 +1141,7 @@ config PCI_BIOS
-
- config PCI_DIRECT
- bool
-- depends on PCI && ((PCI_GODIRECT || PCI_GOANY) || X86_VISWS)
-+ depends on PCI && ((PCI_GODIRECT || PCI_GOANY || PCI_GOOLPC) || X86_VISWS)
- default y
-
- config PCI_MMCONFIG
-@@ -1137,6 +1149,11 @@ config PCI_MMCONFIG
- depends on PCI && ACPI && (PCI_GOMMCONFIG || PCI_GOANY)
- default y
-
-+config PCI_OLPC
-+ bool
-+ depends on PCI && PCI_GOOLPC
-+ default y
-+
- source "drivers/pci/pcie/Kconfig"
-
- source "drivers/pci/Kconfig"
-@@ -1206,10 +1223,43 @@ config SCx200HR_TIMER
- processor goes idle (as is done by the scheduler). The
- other workaround is idle=poll boot option.
-
-+config GEODE_MFGPT_TIMER
-+ bool "Geode Multi-Function General Purpose Timer (mfgpt) Support"
-+ depends on MGEODE_LX && GENERIC_TIME && GENERIC_CLOCKEVENTS
-+ default y
-+ help
-+ This driver provides a clock event source based on the MFGPT
-+ timer(s) in the CS5535 and CS5536 companion chip for the geode.
-+ MFGPTs have a better resolution and max interval than the
-+ generic PIT, and are suitable for use as high-res timers.
-+
- config K8_NB
- def_bool y
- depends on AGP_AMD64
-
-+config OLPC
-+ bool "OLPC Support"
-+ default n
-+ help
-+ Add support for detecting the unique features of the OLPC
-+ Childrens Machine
-+
-+config OLPC_PM
-+ tristate "OLPC power management support"
-+ default y
-+ depends on OLPC
-+ help
-+ Add support for the Geode power management facilities on the
-+ OLPC Childrens Machine
-+
-+config OPEN_FIRMWARE
-+ bool "Support for Open Firmware"
-+ default y if OLPC
-+ help
-+ This option adds support for the implementation of Open Firmware
-+ that is used on the OLPC Children's Machine.
-+ If unsure, say N here.
-+
- source "drivers/pcmcia/Kconfig"
-
- source "drivers/pci/hotplug/Kconfig"
-Index: linux-2.6.23.17/arch/i386/kernel/Makefile
-===================================================================
---- linux-2.6.23.17.orig/arch/i386/kernel/Makefile
-+++ linux-2.6.23.17/arch/i386/kernel/Makefile
-@@ -39,13 +39,17 @@ obj-$(CONFIG_VM86) += vm86.o
- obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
- obj-$(CONFIG_HPET_TIMER) += hpet.o
- obj-$(CONFIG_K8_NB) += k8.o
--obj-$(CONFIG_MGEODE_LX) += geode.o
-+obj-$(CONFIG_MGEODE_LX) += geode.o mfgpt.o
-
- obj-$(CONFIG_VMI) += vmi.o vmiclock.o
- obj-$(CONFIG_PARAVIRT) += paravirt.o
- obj-y += pcspeaker.o
-
- obj-$(CONFIG_SCx200) += scx200.o
-+obj-$(CONFIG_OLPC) += olpc.o
-+obj-$(CONFIG_OLPC_PM) += olpc-pm.o olpc-wakeup.o
-+obj-$(CONFIG_OPEN_FIRMWARE) += ofw.o
-+obj-$(CONFIG_PROMFS_FS) += prom.o
-
- # vsyscall.o contains the vsyscall DSO images as __initdata.
- # We must build both images before we can assemble it.
-Index: linux-2.6.23.17/arch/i386/kernel/geode.c
-===================================================================
---- linux-2.6.23.17.orig/arch/i386/kernel/geode.c
-+++ linux-2.6.23.17/arch/i386/kernel/geode.c
-@@ -145,10 +145,14 @@ EXPORT_SYMBOL_GPL(geode_gpio_setup_event
-
- static int __init geode_southbridge_init(void)
- {
-+ int timers;
-+
- if (!is_geode())
- return -ENODEV;
-
- init_lbars();
-+ timers = geode_mfgpt_detect();
-+ printk(KERN_INFO "geode-mfgpt: %d timers available.\n", timers);
- return 0;
- }
-
-Index: linux-2.6.23.17/arch/i386/kernel/head.S
-===================================================================
---- linux-2.6.23.17.orig/arch/i386/kernel/head.S
-+++ linux-2.6.23.17/arch/i386/kernel/head.S
-@@ -117,8 +117,34 @@ ENTRY(startup_32)
- movl $(COMMAND_LINE_SIZE/4),%ecx
- rep
- movsl
-+
-+#ifdef CONFIG_OPEN_FIRMWARE
-+/*
-+ * If Open Firmware booted us, save the OFW client interface callback address
-+ * and preserve the OFW page mappings by priming the kernel's new page
-+ * directory area with a copy of the OFW page directory. That lets OFW stay
-+ * resident in high memory (high in both the virtual and physical spaces)
-+ * for at least long enough to copy out the device tree.
-+ */
- 1:
-+ movl $(boot_params - __PAGE_OFFSET + OFW_INFO_OFFSET), %ebp
-+ cmpl $0x2057464F, (%ebp) /* Magic number "OFW " */
-+ jne 1f
-+
-+ mov 0x8(%ebp), %eax /* Save callback address */
-+ mov %eax, call_firmware - __PAGE_OFFSET
-+
-+ /* Copy the OFW pdir into swapper_pg_dir */
-+ movl %esi, %edx /* save %esi */
-+ movl $(swapper_pg_dir - __PAGE_OFFSET), %edi
-+ movl %cr3, %esi /* Source is current pg_dir base address */
-+ movl $1024, %ecx /* Number of page directory entries */
-+ rep
-+ movsl
-+ movl %edx, %esi /* restore %esi */
-+#endif
-
-+1:
- /*
- * Initialize page tables. This creates a PDE and a set of page
- * tables, which are located immediately beyond _end. The variable
-@@ -129,6 +155,7 @@ ENTRY(startup_32)
- * Warning: don't use %esi or the stack in this code. However, %esp
- * can be used as a GPR if you really need it...
- */
-+
- page_pde_offset = (__PAGE_OFFSET >> 20);
-
- movl $(pg0 - __PAGE_OFFSET), %edi
-Index: linux-2.6.23.17/arch/i386/kernel/setup.c
-===================================================================
---- linux-2.6.23.17.orig/arch/i386/kernel/setup.c
-+++ linux-2.6.23.17/arch/i386/kernel/setup.c
-@@ -362,8 +362,10 @@ void __init zone_sizes_init(void)
- {
- unsigned long max_zone_pfns[MAX_NR_ZONES];
- memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
-+#ifdef CONFIG_ZONE_DMA
- max_zone_pfns[ZONE_DMA] =
- virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
-+#endif
- max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
- #ifdef CONFIG_HIGHMEM
- max_zone_pfns[ZONE_HIGHMEM] = highend_pfn;
-@@ -428,6 +430,9 @@ void __init setup_bootmem_allocator(void
- */
- acpi_reserve_bootmem();
- #endif
-+#ifdef CONFIG_OLPC_PM
-+ reserve_bootmem(0xf0000, PAGE_SIZE);
-+#endif
- #ifdef CONFIG_X86_FIND_SMP_CONFIG
- /*
- * Find and reserve possible boot-time SMP configuration:
-Index: linux-2.6.23.17/arch/i386/pci/Makefile
-===================================================================
---- linux-2.6.23.17.orig/arch/i386/pci/Makefile
-+++ linux-2.6.23.17/arch/i386/pci/Makefile
-@@ -3,6 +3,7 @@ obj-y := i386.o init.o
- obj-$(CONFIG_PCI_BIOS) += pcbios.o
- obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o direct.o mmconfig-shared.o
- obj-$(CONFIG_PCI_DIRECT) += direct.o
-+obj-$(CONFIG_PCI_OLPC) += olpc.o
-
- pci-y := fixup.o
- pci-$(CONFIG_ACPI) += acpi.o
-Index: linux-2.6.23.17/arch/i386/pci/init.c
-===================================================================
---- linux-2.6.23.17.orig/arch/i386/pci/init.c
-+++ linux-2.6.23.17/arch/i386/pci/init.c
-@@ -14,6 +14,9 @@ static __init int pci_access_init(void)
- #ifdef CONFIG_PCI_MMCONFIG
- pci_mmcfg_init(type);
- #endif
-+#ifdef CONFIG_PCI_OLPC
-+ pci_olpc_init();
-+#endif
- if (raw_pci_ops)
- return 0;
- #ifdef CONFIG_PCI_BIOS
-Index: linux-2.6.23.17/arch/i386/pci/pci.h
-===================================================================
---- linux-2.6.23.17.orig/arch/i386/pci/pci.h
-+++ linux-2.6.23.17/arch/i386/pci/pci.h
-@@ -93,6 +93,7 @@ extern void pci_direct_init(int type);
- extern void pci_pcbios_init(void);
- extern void pci_mmcfg_init(int type);
- extern void pcibios_sort(void);
-+extern void pci_olpc_init(void);
-
- /* pci-mmconfig.c */
-
-Index: linux-2.6.23.17/drivers/Makefile
-===================================================================
---- linux-2.6.23.17.orig/drivers/Makefile
-+++ linux-2.6.23.17/drivers/Makefile
-@@ -23,6 +23,8 @@ obj-y += char/
-
- obj-$(CONFIG_CONNECTOR) += connector/
-
-+obj-$(CONFIG_SYSPROF) += sysprof/
-+
- # i810fb and intelfb depend on char/agp/
- obj-$(CONFIG_FB_I810) += video/i810/
- obj-$(CONFIG_FB_INTEL) += video/intelfb/
-Index: linux-2.6.23.17/drivers/char/vt_ioctl.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/char/vt_ioctl.c
-+++ linux-2.6.23.17/drivers/char/vt_ioctl.c
-@@ -37,6 +37,9 @@
- char vt_dont_switch;
- extern struct tty_driver *console_driver;
-
-+/* Add a notifier chain to inform drivers of a VT_TEXT/VT_GRAPHICS switch */
-+RAW_NOTIFIER_HEAD(console_notifier_list);
-+
- #define VT_IS_IN_USE(i) (console_driver->ttys[i] && console_driver->ttys[i]->count)
- #define VT_BUSY(i) (VT_IS_IN_USE(i) || i == fg_console || vc_cons[i].d == sel_cons)
-
-@@ -491,6 +494,14 @@ int vt_ioctl(struct tty_struct *tty, str
- vc->vc_mode = (unsigned char) arg;
- if (console != fg_console)
- return 0;
-+
-+ /* Notify listeners if the current fg_console has switched */
-+
-+ raw_notifier_call_chain(&console_notifier_list,
-+ (arg == KD_TEXT) ?
-+ CONSOLE_EVENT_SWITCH_TEXT :
-+ CONSOLE_EVENT_SWITCH_GRAPHICS, 0);
-+
- /*
- * explicitly blank/unblank the screen if switching modes
- */
-Index: linux-2.6.23.17/drivers/i2c/busses/scx200_acb.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/i2c/busses/scx200_acb.c
-+++ linux-2.6.23.17/drivers/i2c/busses/scx200_acb.c
-@@ -46,6 +46,10 @@ static int base[MAX_DEVICES] = { 0x820,
- module_param_array(base, int, NULL, 0);
- MODULE_PARM_DESC(base, "Base addresses for the ACCESS.bus controllers");
-
-+static unsigned int smbclk = 0x70;
-+module_param(smbclk, uint, 0);
-+MODULE_PARM_DESC(smbclk, "Specify the SMB_CLK value");
-+
- #define POLL_TIMEOUT (HZ/5)
-
- enum scx200_acb_state {
-@@ -108,6 +112,7 @@ struct scx200_acb_iface {
- #define ACBADDR (iface->base + 4)
- #define ACBCTL2 (iface->base + 5)
- #define ACBCTL2_ENABLE 0x01
-+#define ACBCTL3 (iface->base + 6)
-
- /************************************************************************/
-
-@@ -392,11 +397,13 @@ static __init int scx200_acb_probe(struc
- {
- u8 val;
-
-- /* Disable the ACCESS.bus device and Configure the SCL
-- frequency: 16 clock cycles */
-- outb(0x70, ACBCTL2);
-+ /* Disable the ACCESS.bus device and Configure the SCL */
-+
-+ outb((smbclk & 0x7F) << 1, ACBCTL2);
-+
-+ outb((smbclk >> 7) & 0xFF, ACBCTL3);
-
-- if (inb(ACBCTL2) != 0x70) {
-+ if (inb(ACBCTL2) != ((smbclk & 0x7F) << 1)) {
- pr_debug(NAME ": ACBCTL2 readback failed\n");
- return -ENXIO;
- }
-Index: linux-2.6.23.17/drivers/input/keyboard/atkbd.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/input/keyboard/atkbd.c
-+++ linux-2.6.23.17/drivers/input/keyboard/atkbd.c
-@@ -63,12 +63,25 @@ static int atkbd_extra;
- module_param_named(extra, atkbd_extra, bool, 0);
- MODULE_PARM_DESC(extra, "Enable extra LEDs and keys on IBM RapidAcces, EzKey and similar keyboards");
-
-+#define ATKBD_KEY_UNKNOWN 0
-+#define ATKBD_KEY_NULL 0xFF0000FF
-+
-+#define ATKBD_SCR_1 0xFF0000FE
-+#define ATKBD_SCR_2 0xFF0000FD
-+#define ATKBD_SCR_4 0xFF0000FC
-+#define ATKBD_SCR_8 0xFF0000FB
-+#define ATKBD_SCR_CLICK 0xFF0000FA
-+#define ATKBD_SCR_LEFT 0xFF0000F9
-+#define ATKBD_SCR_RIGHT 0xFF0000F8
-+
-+#define ATKBD_SPECIAL 0xFF0000F8
-+
- /*
- * Scancode to keycode tables. These are just the default setting, and
- * are loadable via an userland utility.
- */
-
--static unsigned char atkbd_set2_keycode[512] = {
-+static unsigned int atkbd_set2_keycode[512] = {
-
- #ifdef CONFIG_KEYBOARD_ATKBD_HP_KEYCODES
-
-@@ -87,11 +100,17 @@ static unsigned char atkbd_set2_keycode[
- 82, 83, 80, 76, 77, 72, 1, 69, 87, 78, 81, 74, 55, 73, 70, 99,
-
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-- 217,100,255, 0, 97,165, 0, 0,156, 0, 0, 0, 0, 0, 0,125,
-+
-+ 217,100,ATKBD_KEY_NULL, 0, 97,165, 0, 0,
-+ 156, 0, 0, 0, 0, 0, 0,125,
-+
- 173,114, 0,113, 0, 0, 0,126,128, 0, 0,140, 0, 0, 0,127,
- 159, 0,115, 0,164, 0, 0,116,158, 0,172,166, 0, 0, 0,142,
- 157, 0, 0, 0, 0, 0, 0, 0,155, 0, 98, 0, 0,163, 0, 0,
-- 226, 0, 0, 0, 0, 0, 0, 0, 0,255, 96, 0, 0, 0,143, 0,
-+
-+ 226, 0, 0, 0, 0, 0, 0, 0,
-+ 0,ATKBD_KEY_NULL, 96, 0, 0, 0,143, 0,
-+
- 0, 0, 0, 0, 0, 0, 0, 0, 0,107, 0,105,102, 0, 0,112,
- 110,111,108,112,106,103, 0,119, 0,118,109, 0, 99,104,119, 0,
-
-@@ -150,19 +169,6 @@ static unsigned char atkbd_unxlate_table
- #define ATKBD_RET_HANGEUL 0xf2
- #define ATKBD_RET_ERR 0xff
-
--#define ATKBD_KEY_UNKNOWN 0
--#define ATKBD_KEY_NULL 255
--
--#define ATKBD_SCR_1 254
--#define ATKBD_SCR_2 253
--#define ATKBD_SCR_4 252
--#define ATKBD_SCR_8 251
--#define ATKBD_SCR_CLICK 250
--#define ATKBD_SCR_LEFT 249
--#define ATKBD_SCR_RIGHT 248
--
--#define ATKBD_SPECIAL 248
--
- #define ATKBD_LED_EVENT_BIT 0
- #define ATKBD_REP_EVENT_BIT 1
-
-@@ -174,7 +180,7 @@ static unsigned char atkbd_unxlate_table
- #define ATKBD_XL_HANJA 0x20
-
- static struct {
-- unsigned char keycode;
-+ unsigned int keycode;
- unsigned char set2;
- } atkbd_scroll_keys[] = {
- { ATKBD_SCR_1, 0xc5 },
-@@ -200,7 +206,7 @@ struct atkbd {
- char phys[32];
-
- unsigned short id;
-- unsigned char keycode[512];
-+ unsigned int keycode[512];
- unsigned char set;
- unsigned char translated;
- unsigned char extra;
-@@ -351,7 +357,7 @@ static irqreturn_t atkbd_interrupt(struc
- unsigned int code = data;
- int scroll = 0, hscroll = 0, click = -1, add_release_event = 0;
- int value;
-- unsigned char keycode;
-+ unsigned int keycode;
-
- #ifdef ATKBD_DEBUG
- printk(KERN_DEBUG "atkbd.c: Received %02x flags %02x\n", data, flags);
-@@ -856,9 +862,11 @@ static void atkbd_set_keycode_table(stru
- atkbd->keycode[i | 0x80] = atkbd_scroll_keys[j].keycode;
- }
- } else if (atkbd->set == 3) {
-- memcpy(atkbd->keycode, atkbd_set3_keycode, sizeof(atkbd->keycode));
-+ for (i = 0; i < ARRAY_SIZE(atkbd_set3_keycode); i++)
-+ atkbd->keycode[i] = atkbd_set3_keycode[i];
- } else {
-- memcpy(atkbd->keycode, atkbd_set2_keycode, sizeof(atkbd->keycode));
-+ for (i = 0; i < ARRAY_SIZE(atkbd_set2_keycode); i++)
-+ atkbd->keycode[i] = atkbd_set2_keycode[i];
-
- if (atkbd->scroll)
- for (i = 0; i < ARRAY_SIZE(atkbd_scroll_keys); i++)
-@@ -925,8 +933,8 @@ static void atkbd_set_device_attrs(struc
- }
-
- input_dev->keycode = atkbd->keycode;
-- input_dev->keycodesize = sizeof(unsigned char);
-- input_dev->keycodemax = ARRAY_SIZE(atkbd_set2_keycode);
-+ input_dev->keycodesize = sizeof(unsigned int);
-+ input_dev->keycodemax = ARRAY_SIZE(atkbd->keycode);
-
- for (i = 0; i < 512; i++)
- if (atkbd->keycode[i] && atkbd->keycode[i] < ATKBD_SPECIAL)
-@@ -1017,6 +1025,10 @@ static int atkbd_connect(struct serio *s
- return err;
- }
-
-+#ifdef CONFIG_OLPC
-+#include <asm/olpc.h>
-+#endif
-+
- /*
- * atkbd_reconnect() tries to restore keyboard into a sane state and is
- * most likely called on resume.
-@@ -1027,6 +1039,12 @@ static int atkbd_reconnect(struct serio
- struct atkbd *atkbd = serio_get_drvdata(serio);
- struct serio_driver *drv = serio->drv;
-
-+#ifdef CONFIG_OLPC
-+ if (olpc_rev_after(OLPC_REV_B2))
-+ if (serio->dev.power.power_state.event != PM_EVENT_ON)
-+ return 0;
-+#endif
-+
- if (!atkbd || !drv) {
- printk(KERN_DEBUG "atkbd: reconnect request, but serio is disconnected, ignoring...\n");
- return -1;
-Index: linux-2.6.23.17/drivers/input/mouse/Kconfig
-===================================================================
---- linux-2.6.23.17.orig/drivers/input/mouse/Kconfig
-+++ linux-2.6.23.17/drivers/input/mouse/Kconfig
-@@ -96,6 +96,16 @@ config MOUSE_PS2_TOUCHKIT
-
- If unsure, say N.
-
-+config MOUSE_PS2_OLPC
-+ bool "OLPC PS/2 mouse protocol extension" if EMBEDDED
-+ default n
-+ depends on MOUSE_PS2 && OLPC
-+ ---help---
-+ Say Y here if you have an OLPC PS/2 touchpad connected to
-+ your system.
-+
-+ If unsure, say N.
-+
- config MOUSE_SERIAL
- tristate "Serial mouse"
- select SERIO
-Index: linux-2.6.23.17/drivers/input/mouse/Makefile
-===================================================================
---- linux-2.6.23.17.orig/drivers/input/mouse/Makefile
-+++ linux-2.6.23.17/drivers/input/mouse/Makefile
-@@ -24,3 +24,4 @@ psmouse-$(CONFIG_MOUSE_PS2_LOGIPS2PP) +=
- psmouse-$(CONFIG_MOUSE_PS2_LIFEBOOK) += lifebook.o
- psmouse-$(CONFIG_MOUSE_PS2_TRACKPOINT) += trackpoint.o
- psmouse-$(CONFIG_MOUSE_PS2_TOUCHKIT) += touchkit_ps2.o
-+psmouse-$(CONFIG_MOUSE_PS2_OLPC) += olpc.o
-Index: linux-2.6.23.17/drivers/input/mouse/psmouse-base.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/input/mouse/psmouse-base.c
-+++ linux-2.6.23.17/drivers/input/mouse/psmouse-base.c
-@@ -26,6 +26,7 @@
- #include "synaptics.h"
- #include "logips2pp.h"
- #include "alps.h"
-+#include "olpc.h"
- #include "lifebook.h"
- #include "trackpoint.h"
- #include "touchkit_ps2.h"
-@@ -103,7 +104,7 @@ static struct attribute_group psmouse_at
- */
- static DEFINE_MUTEX(psmouse_mutex);
-
--static struct workqueue_struct *kpsmoused_wq;
-+struct workqueue_struct *kpsmoused_wq;
-
- struct psmouse_protocol {
- enum psmouse_type type;
-@@ -320,7 +321,7 @@ static irqreturn_t psmouse_interrupt(str
- goto out;
- }
-
-- if (psmouse->packet[1] == PSMOUSE_RET_ID) {
-+ if (psmouse->packet[1] == PSMOUSE_RET_ID || psmouse->packet[1] == PSMOUSE_RET_BAT) {
- __psmouse_set_state(psmouse, PSMOUSE_IGNORE);
- serio_reconnect(serio);
- goto out;
-@@ -631,8 +632,21 @@ static int psmouse_extensions(struct psm
- }
- }
-
-+/*
-+ * Try OLPC touchpad.
-+ */
- if (max_proto > PSMOUSE_IMEX) {
-+ if (olpc_detect(psmouse, set_properties) == 0) {
-+ if (!set_properties || olpc_init(psmouse) == 0)
-+ return PSMOUSE_OLPC;
-+/*
-+ * Init failed, try basic relative protocols
-+ */
-+ max_proto = PSMOUSE_IMEX;
-+ }
-+ }
-
-+ if (max_proto > PSMOUSE_IMEX) {
- if (genius_detect(psmouse, set_properties) == 0)
- return PSMOUSE_GENPS;
-
-@@ -762,6 +776,14 @@ static const struct psmouse_protocol psm
- .detect = touchkit_ps2_detect,
- },
- #endif
-+#ifdef CONFIG_MOUSE_PS2_OLPC
-+ {
-+ .type = PSMOUSE_OLPC,
-+ .name = "OLPC",
-+ .alias = "olpc",
-+ .detect = olpc_detect,
-+ },
-+#endif
- {
- .type = PSMOUSE_CORTRON,
- .name = "CortronPS/2",
-Index: linux-2.6.23.17/drivers/input/mouse/psmouse.h
-===================================================================
---- linux-2.6.23.17.orig/drivers/input/mouse/psmouse.h
-+++ linux-2.6.23.17/drivers/input/mouse/psmouse.h
-@@ -89,6 +89,7 @@ enum psmouse_type {
- PSMOUSE_TRACKPOINT,
- PSMOUSE_TOUCHKIT_PS2,
- PSMOUSE_CORTRON,
-+ PSMOUSE_OLPC,
- PSMOUSE_AUTO /* This one should always be last */
- };
-
-@@ -96,6 +97,7 @@ int psmouse_sliced_command(struct psmous
- int psmouse_reset(struct psmouse *psmouse);
- void psmouse_set_resolution(struct psmouse *psmouse, unsigned int resolution);
-
-+extern struct workqueue_struct *kpsmoused_wq;
-
- struct psmouse_attribute {
- struct device_attribute dattr;
-Index: linux-2.6.23.17/drivers/input/serio/i8042.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/input/serio/i8042.c
-+++ linux-2.6.23.17/drivers/input/serio/i8042.c
-@@ -868,6 +868,11 @@ static long i8042_panic_blink(long count
- #undef DELAY
-
- #ifdef CONFIG_PM
-+
-+#ifdef CONFIG_OLPC
-+#include <asm/olpc.h>
-+#endif
-+
- /*
- * Here we try to restore the original BIOS settings. We only want to
- * do that once, when we really suspend, not when we taking memory
-@@ -878,8 +883,15 @@ static long i8042_panic_blink(long count
- static int i8042_suspend(struct platform_device *dev, pm_message_t state)
- {
- if (dev->dev.power.power_state.event != state.event) {
-+#ifdef CONFIG_OLPC
-+ /* Anything newer than B2 remains powered; no reset needed */
-+ if (olpc_rev_before(OLPC_REV_PRE_B3)) {
-+#endif
- if (state.event == PM_EVENT_SUSPEND)
- i8042_controller_reset();
-+#ifdef CONFIG_OLPC
-+ }
-+#endif
-
- dev->dev.power.power_state = state;
- }
-@@ -902,9 +914,15 @@ static int i8042_resume(struct platform_
- if (dev->dev.power.power_state.event == PM_EVENT_ON)
- return 0;
-
-+#ifdef CONFIG_OLPC
-+ if (olpc_rev_before(OLPC_REV_PRE_B3)) {
-+#endif
- error = i8042_controller_check();
- if (error)
- return error;
-+#ifdef CONFIG_OLPC
-+ }
-+#endif
-
- error = i8042_controller_selftest();
- if (error)
-Index: linux-2.6.23.17/drivers/input/serio/serio.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/input/serio/serio.c
-+++ linux-2.6.23.17/drivers/input/serio/serio.c
-@@ -916,11 +916,22 @@ static int serio_uevent(struct device *d
- #endif /* CONFIG_HOTPLUG */
-
- #ifdef CONFIG_PM
-+
-+#ifdef CONFIG_OLPC
-+#include <asm/olpc.h>
-+#endif
-+
- static int serio_suspend(struct device *dev, pm_message_t state)
- {
- if (dev->power.power_state.event != state.event) {
-+#ifdef CONFIG_OLPC
-+ if (olpc_rev_before(OLPC_REV_PRE_B3)) {
-+#endif
- if (state.event == PM_EVENT_SUSPEND)
- serio_cleanup(to_serio_port(dev));
-+#ifdef CONFIG_OLPC
-+ }
-+#endif
-
- dev->power.power_state = state;
- }
-Index: linux-2.6.23.17/drivers/media/video/cafe_ccic.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/media/video/cafe_ccic.c
-+++ linux-2.6.23.17/drivers/media/video/cafe_ccic.c
-@@ -63,13 +63,13 @@ MODULE_SUPPORTED_DEVICE("Video");
- */
-
- #define MAX_DMA_BUFS 3
--static int alloc_bufs_at_load = 0;
--module_param(alloc_bufs_at_load, bool, 0444);
--MODULE_PARM_DESC(alloc_bufs_at_load,
-- "Non-zero value causes DMA buffers to be allocated at module "
-- "load time. This increases the chances of successfully getting "
-- "those buffers, but at the cost of nailing down the memory from "
-- "the outset.");
-+static int alloc_bufs_at_read = 0;
-+module_param(alloc_bufs_at_read, bool, 0444);
-+MODULE_PARM_DESC(alloc_bufs_at_read,
-+ "Non-zero value causes DMA buffers to be allocated when the "
-+ "video capture device is read, rather than at module load "
-+ "time. This saves memory, but decreases the chances of "
-+ "successfully getting those buffers.");
-
- static int n_dma_bufs = 3;
- module_param(n_dma_bufs, uint, 0644);
-@@ -370,6 +370,10 @@ static int cafe_smbus_write_data(struct
- rval = value | ((command << TWSIC1_ADDR_SHIFT) & TWSIC1_ADDR);
- cafe_reg_write(cam, REG_TWSIC1, rval);
- spin_unlock_irqrestore(&cam->dev_lock, flags);
-+ mdelay(2); /* It'll probably take about 900µs anyway, and the
-+ CAFÉ is apparently quite sensitive to being poked
-+ at this point. If we can work out precisely what's
-+ going on and reduce this delay, it would be nice. */
-
- /*
- * Time to wait for the write to complete. THIS IS A RACY
-@@ -1503,7 +1507,7 @@ static int cafe_v4l_release(struct inode
- }
- if (cam->users == 0) {
- cafe_ctlr_power_down(cam);
-- if (! alloc_bufs_at_load)
-+ if (alloc_bufs_at_read)
- cafe_free_dma_bufs(cam);
- }
- mutex_unlock(&cam->s_mutex);
-@@ -2162,7 +2166,7 @@ static int cafe_pci_probe(struct pci_dev
- /*
- * If so requested, try to get our DMA buffers now.
- */
-- if (alloc_bufs_at_load) {
-+ if (!alloc_bufs_at_read) {
- if (cafe_alloc_dma_bufs(cam, 1))
- cam_warn(cam, "Unable to alloc DMA buffers at load"
- " will try again later.");
-Index: linux-2.6.23.17/drivers/misc/Kconfig
-===================================================================
---- linux-2.6.23.17.orig/drivers/misc/Kconfig
-+++ linux-2.6.23.17/drivers/misc/Kconfig
-@@ -202,5 +202,10 @@ config THINKPAD_ACPI_BAY
-
- If you are not sure, say Y here.
-
-+config EEPROM_93CX6
-+ tristate "EEPROM 93CX6 support"
-+ ---help---
-+ This is a driver for the EEPROM chipsets 93c46 and 93c66.
-+ The driver supports both read as well as write commands.
-
- endif # MISC_DEVICES
-Index: linux-2.6.23.17/drivers/mmc/host/sdhci.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/mmc/host/sdhci.c
-+++ linux-2.6.23.17/drivers/mmc/host/sdhci.c
-@@ -411,6 +411,12 @@ static void sdhci_prepare_data(struct sd
- break;
- }
-
-+ /*
-+ * There's an off-by-one error in the hw that we need to
-+ * compensate for.
-+ */
-+ count++;
-+
- if (count >= 0xF) {
- printk(KERN_WARNING "%s: Too large timeout requested!\n",
- mmc_hostname(host->mmc));
-@@ -676,19 +682,17 @@ static void sdhci_set_power(struct sdhci
- if (!(host->chip->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE))
- writeb(0, host->ioaddr + SDHCI_POWER_CONTROL);
-
-- pwr = SDHCI_POWER_ON;
--
- switch (1 << power) {
- case MMC_VDD_165_195:
-- pwr |= SDHCI_POWER_180;
-+ pwr = SDHCI_POWER_180;
- break;
- case MMC_VDD_29_30:
- case MMC_VDD_30_31:
-- pwr |= SDHCI_POWER_300;
-+ pwr = SDHCI_POWER_300;
- break;
- case MMC_VDD_32_33:
- case MMC_VDD_33_34:
-- pwr |= SDHCI_POWER_330;
-+ pwr = SDHCI_POWER_330;
- break;
- default:
- BUG();
-@@ -696,6 +700,10 @@ static void sdhci_set_power(struct sdhci
-
- writeb(pwr, host->ioaddr + SDHCI_POWER_CONTROL);
-
-+ pwr |= SDHCI_POWER_ON;
-+
-+ writeb(pwr, host->ioaddr + SDHCI_POWER_CONTROL);
-+
- out:
- host->power = power;
- }
-Index: linux-2.6.23.17/drivers/mtd/Kconfig
-===================================================================
---- linux-2.6.23.17.orig/drivers/mtd/Kconfig
-+++ linux-2.6.23.17/drivers/mtd/Kconfig
-@@ -288,6 +288,14 @@ config SSFDC
- This enables read only access to SmartMedia formatted NAND
- flash. You can mount it with FAT file system.
-
-+config MTD_OOPS
-+ tristate "Log panic/oops to an MTD buffer"
-+ depends on MTD
-+ help
-+ This enables panic and oops messages to be logged to a circular
-+ buffer in a flash partition where it can be read back at some
-+ later point.
-+
- source "drivers/mtd/chips/Kconfig"
-
- source "drivers/mtd/maps/Kconfig"
-Index: linux-2.6.23.17/drivers/mtd/Makefile
-===================================================================
---- linux-2.6.23.17.orig/drivers/mtd/Makefile
-+++ linux-2.6.23.17/drivers/mtd/Makefile
-@@ -22,6 +22,7 @@ obj-$(CONFIG_NFTL) += nftl.o
- obj-$(CONFIG_INFTL) += inftl.o
- obj-$(CONFIG_RFD_FTL) += rfd_ftl.o
- obj-$(CONFIG_SSFDC) += ssfdc.o
-+obj-$(CONFIG_MTD_OOPS) += mtdoops.o
-
- nftl-objs := nftlcore.o nftlmount.o
- inftl-objs := inftlcore.o inftlmount.o
-Index: linux-2.6.23.17/drivers/mtd/chips/cfi_cmdset_0001.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/mtd/chips/cfi_cmdset_0001.c
-+++ linux-2.6.23.17/drivers/mtd/chips/cfi_cmdset_0001.c
-@@ -526,7 +526,7 @@ static int cfi_intelext_partition_fixup(
- struct cfi_pri_intelext *extp = cfi->cmdset_priv;
-
- /*
-- * Probing of multi-partition flash ships.
-+ * Probing of multi-partition flash chips.
- *
- * To support multiple partitions when available, we simply arrange
- * for each of them to have their own flchip structure even if they
-@@ -1781,7 +1781,7 @@ static int __xipram do_erase_oneblock(st
- return ret;
- }
-
--int cfi_intelext_erase_varsize(struct mtd_info *mtd, struct erase_info *instr)
-+static int cfi_intelext_erase_varsize(struct mtd_info *mtd, struct erase_info *instr)
- {
- unsigned long ofs, len;
- int ret;
-@@ -1931,7 +1931,7 @@ static int cfi_intelext_lock(struct mtd_
- printk(KERN_DEBUG "%s: lock status before, ofs=0x%08llx, len=0x%08X\n",
- __FUNCTION__, ofs, len);
- cfi_varsize_frob(mtd, do_printlockstatus_oneblock,
-- ofs, len, 0);
-+ ofs, len, NULL);
- #endif
-
- ret = cfi_varsize_frob(mtd, do_xxlock_oneblock,
-@@ -1941,7 +1941,7 @@ static int cfi_intelext_lock(struct mtd_
- printk(KERN_DEBUG "%s: lock status after, ret=%d\n",
- __FUNCTION__, ret);
- cfi_varsize_frob(mtd, do_printlockstatus_oneblock,
-- ofs, len, 0);
-+ ofs, len, NULL);
- #endif
-
- return ret;
-@@ -1955,7 +1955,7 @@ static int cfi_intelext_unlock(struct mt
- printk(KERN_DEBUG "%s: lock status before, ofs=0x%08llx, len=0x%08X\n",
- __FUNCTION__, ofs, len);
- cfi_varsize_frob(mtd, do_printlockstatus_oneblock,
-- ofs, len, 0);
-+ ofs, len, NULL);
- #endif
-
- ret = cfi_varsize_frob(mtd, do_xxlock_oneblock,
-@@ -1965,7 +1965,7 @@ static int cfi_intelext_unlock(struct mt
- printk(KERN_DEBUG "%s: lock status after, ret=%d\n",
- __FUNCTION__, ret);
- cfi_varsize_frob(mtd, do_printlockstatus_oneblock,
-- ofs, len, 0);
-+ ofs, len, NULL);
- #endif
-
- return ret;
-@@ -2256,7 +2256,7 @@ static void cfi_intelext_save_locks(stru
- adr = region->offset + block * len;
-
- status = cfi_varsize_frob(mtd,
-- do_getlockstatus_oneblock, adr, len, 0);
-+ do_getlockstatus_oneblock, adr, len, NULL);
- if (status)
- set_bit(block, region->lockmap);
- else
-Index: linux-2.6.23.17/drivers/mtd/chips/cfi_cmdset_0002.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ linux-2.6.23.17/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -1617,7 +1617,7 @@ static int __xipram do_erase_oneblock(st
- }
-
-
--int cfi_amdstd_erase_varsize(struct mtd_info *mtd, struct erase_info *instr)
-+static int cfi_amdstd_erase_varsize(struct mtd_info *mtd, struct erase_info *instr)
- {
- unsigned long ofs, len;
- int ret;
-Index: linux-2.6.23.17/drivers/mtd/chips/jedec_probe.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/mtd/chips/jedec_probe.c
-+++ linux-2.6.23.17/drivers/mtd/chips/jedec_probe.c
-@@ -70,6 +70,7 @@
-
- /* Fujitsu */
- #define MBM29F040C 0x00A4
-+#define MBM29F800BA 0x2258
- #define MBM29LV650UE 0x22D7
- #define MBM29LV320TE 0x22F6
- #define MBM29LV320BE 0x22F9
-@@ -129,6 +130,7 @@
- #define LH28F640BF 0x00b0
-
- /* ST - www.st.com */
-+#define M29F800AB 0x0058
- #define M29W800DT 0x00D7
- #define M29W800DB 0x005B
- #define M29W160DT 0x22C4
-@@ -646,6 +648,23 @@ static const struct amd_flash_info jedec
- }
- }, {
- .mfr_id = MANUFACTURER_FUJITSU,
-+ .dev_id = MBM29F800BA,
-+ .name = "Fujitsu MBM29F800BA",
-+ .uaddr = {
-+ [0] = MTD_UADDR_0x0AAA_0x0555, /* x8 */
-+ [1] = MTD_UADDR_0x0555_0x02AA, /* x16 */
-+ },
-+ .DevSize = SIZE_1MiB,
-+ .CmdSet = P_ID_AMD_STD,
-+ .NumEraseRegions= 4,
-+ .regions = {
-+ ERASEINFO(0x04000,1),
-+ ERASEINFO(0x02000,2),
-+ ERASEINFO(0x08000,1),
-+ ERASEINFO(0x10000,15),
-+ }
-+ }, {
-+ .mfr_id = MANUFACTURER_FUJITSU,
- .dev_id = MBM29LV650UE,
- .name = "Fujitsu MBM29LV650UE",
- .uaddr = {
-@@ -1510,6 +1529,23 @@ static const struct amd_flash_info jedec
- ERASEINFO(0x1000,256)
- }
-
-+ }, {
-+ .mfr_id = MANUFACTURER_ST,
-+ .dev_id = M29F800AB,
-+ .name = "ST M29F800AB",
-+ .uaddr = {
-+ [0] = MTD_UADDR_0x0AAA_0x0555, /* x8 */
-+ [1] = MTD_UADDR_0x0555_0x02AA, /* x16 */
-+ },
-+ .DevSize = SIZE_1MiB,
-+ .CmdSet = P_ID_AMD_STD,
-+ .NumEraseRegions= 4,
-+ .regions = {
-+ ERASEINFO(0x04000,1),
-+ ERASEINFO(0x02000,2),
-+ ERASEINFO(0x08000,1),
-+ ERASEINFO(0x10000,15),
-+ }
- }, {
- .mfr_id = MANUFACTURER_ST, /* FIXME - CFI device? */
- .dev_id = M29W800DT,
-Index: linux-2.6.23.17/drivers/mtd/devices/Kconfig
-===================================================================
---- linux-2.6.23.17.orig/drivers/mtd/devices/Kconfig
-+++ linux-2.6.23.17/drivers/mtd/devices/Kconfig
-@@ -69,12 +69,21 @@ config MTD_DATAFLASH26
- If you have such a board and such a DataFlash, say 'Y'.
-
- config MTD_M25P80
-- tristate "Support for M25 SPI Flash"
-+ tristate "Support most SPI Flash chips (AT26DF, M25P, W25X, ...)"
- depends on SPI_MASTER && EXPERIMENTAL
- help
-- This enables access to ST M25P80 and similar SPI flash chips,
-- used for program and data storage. Set up your spi devices
-- with the right board-specific platform data.
-+ This enables access to most modern SPI flash chips, used for
-+ program and data storage. Series supported include Atmel AT26DF,
-+ Spansion S25SL, SST 25VF, ST M25P, and Winbond W25X. Other chips
-+ are supported as well. See the driver source for the current list,
-+ or to add other chips.
-+
-+ Note that the original DataFlash chips (AT45 series, not AT26DF),
-+ need an entirely different driver.
-+
-+ Set up your spi devices with the right board-specific platform data,
-+ if you want to specify device partitioning or to use a device which
-+ doesn't support the JEDEC ID instruction.
-
- config MTD_SLRAM
- tristate "Uncached system RAM"
-Index: linux-2.6.23.17/drivers/mtd/devices/m25p80.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/mtd/devices/m25p80.c
-+++ linux-2.6.23.17/drivers/mtd/devices/m25p80.c
-@@ -1,5 +1,5 @@
- /*
-- * MTD SPI driver for ST M25Pxx flash chips
-+ * MTD SPI driver for ST M25Pxx (and similar) serial flash chips
- *
- * Author: Mike Lavender, mike@steroidmicros.com
- *
-@@ -19,33 +19,32 @@
- #include <linux/module.h>
- #include <linux/device.h>
- #include <linux/interrupt.h>
--#include <linux/interrupt.h>
-+#include <linux/mutex.h>
-+
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
-+
- #include <linux/spi/spi.h>
- #include <linux/spi/flash.h>
-
--#include <asm/semaphore.h>
--
--
--/* NOTE: AT 25F and SST 25LF series are very similar,
-- * but commands for sector erase and chip id differ...
-- */
-
- #define FLASH_PAGESIZE 256
-
- /* Flash opcodes. */
--#define OPCODE_WREN 6 /* Write enable */
--#define OPCODE_RDSR 5 /* Read status register */
--#define OPCODE_READ 3 /* Read data bytes */
--#define OPCODE_PP 2 /* Page program */
--#define OPCODE_SE 0xd8 /* Sector erase */
--#define OPCODE_RES 0xab /* Read Electronic Signature */
-+#define OPCODE_WREN 0x06 /* Write enable */
-+#define OPCODE_RDSR 0x05 /* Read status register */
-+#define OPCODE_READ 0x03 /* Read data bytes (low frequency) */
-+#define OPCODE_FAST_READ 0x0b /* Read data bytes (high frequency) */
-+#define OPCODE_PP 0x02 /* Page program (up to 256 bytes) */
-+#define OPCODE_BE_4K 0x20 /* Erase 4KiB block */
-+#define OPCODE_BE_32K 0x52 /* Erase 32KiB block */
-+#define OPCODE_SE 0xd8 /* Sector erase (usually 64KiB) */
- #define OPCODE_RDID 0x9f /* Read JEDEC ID */
-
- /* Status Register bits. */
- #define SR_WIP 1 /* Write in progress */
- #define SR_WEL 2 /* Write enable latch */
-+/* meaning of other SR_* bits may differ between vendors */
- #define SR_BP0 4 /* Block protect 0 */
- #define SR_BP1 8 /* Block protect 1 */
- #define SR_BP2 0x10 /* Block protect 2 */
-@@ -65,9 +64,10 @@
-
- struct m25p {
- struct spi_device *spi;
-- struct semaphore lock;
-+ struct mutex lock;
- struct mtd_info mtd;
-- unsigned partitioned;
-+ unsigned partitioned:1;
-+ u8 erase_opcode;
- u8 command[4];
- };
-
-@@ -150,8 +150,9 @@ static int wait_till_ready(struct m25p *
- */
- static int erase_sector(struct m25p *flash, u32 offset)
- {
-- DEBUG(MTD_DEBUG_LEVEL3, "%s: %s at 0x%08x\n", flash->spi->dev.bus_id,
-- __FUNCTION__, offset);
-+ DEBUG(MTD_DEBUG_LEVEL3, "%s: %s %dKiB at 0x%08x\n",
-+ flash->spi->dev.bus_id, __FUNCTION__,
-+ flash->mtd.erasesize / 1024, offset);
-
- /* Wait until finished previous write command. */
- if (wait_till_ready(flash))
-@@ -161,7 +162,7 @@ static int erase_sector(struct m25p *fla
- write_enable(flash);
-
- /* Set up command buffer. */
-- flash->command[0] = OPCODE_SE;
-+ flash->command[0] = flash->erase_opcode;
- flash->command[1] = offset >> 16;
- flash->command[2] = offset >> 8;
- flash->command[3] = offset;
-@@ -201,13 +202,17 @@ static int m25p80_erase(struct mtd_info
- addr = instr->addr;
- len = instr->len;
-
-- down(&flash->lock);
-+ mutex_lock(&flash->lock);
-+
-+ /* REVISIT in some cases we could speed up erasing large regions
-+ * by using OPCODE_SE instead of OPCODE_BE_4K
-+ */
-
- /* now erase those sectors */
- while (len) {
- if (erase_sector(flash, addr)) {
- instr->state = MTD_ERASE_FAILED;
-- up(&flash->lock);
-+ mutex_unlock(&flash->lock);
- return -EIO;
- }
-
-@@ -215,7 +220,7 @@ static int m25p80_erase(struct mtd_info
- len -= mtd->erasesize;
- }
-
-- up(&flash->lock);
-+ mutex_unlock(&flash->lock);
-
- instr->state = MTD_ERASE_DONE;
- mtd_erase_callback(instr);
-@@ -260,16 +265,19 @@ static int m25p80_read(struct mtd_info *
- if (retlen)
- *retlen = 0;
-
-- down(&flash->lock);
-+ mutex_lock(&flash->lock);
-
- /* Wait till previous write/erase is done. */
- if (wait_till_ready(flash)) {
- /* REVISIT status return?? */
-- up(&flash->lock);
-+ mutex_unlock(&flash->lock);
- return 1;
- }
-
-- /* NOTE: OPCODE_FAST_READ (if available) is faster... */
-+ /* FIXME switch to OPCODE_FAST_READ. It's required for higher
-+ * clocks; and at this writing, every chip this driver handles
-+ * supports that opcode.
-+ */
-
- /* Set up the write data buffer. */
- flash->command[0] = OPCODE_READ;
-@@ -281,7 +289,7 @@ static int m25p80_read(struct mtd_info *
-
- *retlen = m.actual_length - sizeof(flash->command);
-
-- up(&flash->lock);
-+ mutex_unlock(&flash->lock);
-
- return 0;
- }
-@@ -323,7 +331,7 @@ static int m25p80_write(struct mtd_info
- t[1].tx_buf = buf;
- spi_message_add_tail(&t[1], &m);
-
-- down(&flash->lock);
-+ mutex_lock(&flash->lock);
-
- /* Wait until finished previous write command. */
- if (wait_till_ready(flash))
-@@ -381,10 +389,10 @@ static int m25p80_write(struct mtd_info
- if (retlen)
- *retlen += m.actual_length
- - sizeof(flash->command);
-- }
-- }
-+ }
-+ }
-
-- up(&flash->lock);
-+ mutex_unlock(&flash->lock);
-
- return 0;
- }
-@@ -398,24 +406,118 @@ static int m25p80_write(struct mtd_info
-
- struct flash_info {
- char *name;
-- u8 id;
-- u16 jedec_id;
-+
-+ /* JEDEC id zero means "no ID" (most older chips); otherwise it has
-+ * a high byte of zero plus three data bytes: the manufacturer id,
-+ * then a two byte device id.
-+ */
-+ u32 jedec_id;
-+
-+ /* The size listed here is what works with OPCODE_SE, which isn't
-+ * necessarily called a "sector" by the vendor.
-+ */
- unsigned sector_size;
-- unsigned n_sectors;
-+ u16 n_sectors;
-+
-+ u16 flags;
-+#define SECT_4K 0x01 /* OPCODE_BE_4K works uniformly */
- };
-
-+
-+/* NOTE: double check command sets and memory organization when you add
-+ * more flash chips. This current list focusses on newer chips, which
-+ * have been converging on command sets which including JEDEC ID.
-+ */
- static struct flash_info __devinitdata m25p_data [] = {
-- /* REVISIT: fill in JEDEC ids, for parts that have them */
-- { "m25p05", 0x05, 0x2010, 32 * 1024, 2 },
-- { "m25p10", 0x10, 0x2011, 32 * 1024, 4 },
-- { "m25p20", 0x11, 0x2012, 64 * 1024, 4 },
-- { "m25p40", 0x12, 0x2013, 64 * 1024, 8 },
-- { "m25p80", 0x13, 0x0000, 64 * 1024, 16 },
-- { "m25p16", 0x14, 0x2015, 64 * 1024, 32 },
-- { "m25p32", 0x15, 0x2016, 64 * 1024, 64 },
-- { "m25p64", 0x16, 0x2017, 64 * 1024, 128 },
-+
-+ /* Atmel -- some are (confusingly) marketed as "DataFlash" */
-+ { "at25fs010", 0x1f6601, 32 * 1024, 4, SECT_4K, },
-+ { "at25fs040", 0x1f6604, 64 * 1024, 8, SECT_4K, },
-+
-+ { "at25df041a", 0x1f4401, 64 * 1024, 8, SECT_4K, },
-+
-+ { "at26f004", 0x1f0400, 64 * 1024, 8, SECT_4K, },
-+ { "at26df081a", 0x1f4501, 64 * 1024, 16, SECT_4K, },
-+ { "at26df161a", 0x1f4601, 64 * 1024, 32, SECT_4K, },
-+ { "at26df321", 0x1f4701, 64 * 1024, 64, SECT_4K, },
-+
-+ /* Spansion -- single (large) sector size only, at least
-+ * for the chips listed here (without boot sectors).
-+ */
-+ { "s25sl004a", 0x010212, 64 * 1024, 8, },
-+ { "s25sl008a", 0x010213, 64 * 1024, 16, },
-+ { "s25sl016a", 0x010214, 64 * 1024, 32, },
-+ { "s25sl032a", 0x010215, 64 * 1024, 64, },
-+ { "s25sl064a", 0x010216, 64 * 1024, 128, },
-+
-+ /* SST -- large erase sizes are "overlays", "sectors" are 4K */
-+ { "sst25vf040b", 0xbf258d, 64 * 1024, 8, SECT_4K, },
-+ { "sst25vf080b", 0xbf258e, 64 * 1024, 16, SECT_4K, },
-+ { "sst25vf016b", 0xbf2541, 64 * 1024, 32, SECT_4K, },
-+ { "sst25vf032b", 0xbf254a, 64 * 1024, 64, SECT_4K, },
-+
-+ /* ST Microelectronics -- newer production may have feature updates */
-+ { "m25p05", 0x202010, 32 * 1024, 2, },
-+ { "m25p10", 0x202011, 32 * 1024, 4, },
-+ { "m25p20", 0x202012, 64 * 1024, 4, },
-+ { "m25p40", 0x202013, 64 * 1024, 8, },
-+ { "m25p80", 0, 64 * 1024, 16, },
-+ { "m25p16", 0x202015, 64 * 1024, 32, },
-+ { "m25p32", 0x202016, 64 * 1024, 64, },
-+ { "m25p64", 0x202017, 64 * 1024, 128, },
-+ { "m25p128", 0x202018, 256 * 1024, 64, },
-+
-+ { "m45pe80", 0x204014, 64 * 1024, 16, },
-+ { "m45pe16", 0x204015, 64 * 1024, 32, },
-+
-+ { "m25pe80", 0x208014, 64 * 1024, 16, },
-+ { "m25pe16", 0x208015, 64 * 1024, 32, SECT_4K, },
-+
-+ /* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */
-+ { "w25x10", 0xef3011, 64 * 1024, 2, SECT_4K, },
-+ { "w25x20", 0xef3012, 64 * 1024, 4, SECT_4K, },
-+ { "w25x40", 0xef3013, 64 * 1024, 8, SECT_4K, },
-+ { "w25x80", 0xef3014, 64 * 1024, 16, SECT_4K, },
-+ { "w25x16", 0xef3015, 64 * 1024, 32, SECT_4K, },
-+ { "w25x32", 0xef3016, 64 * 1024, 64, SECT_4K, },
-+ { "w25x64", 0xef3017, 64 * 1024, 128, SECT_4K, },
- };
-
-+static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
-+{
-+ int tmp;
-+ u8 code = OPCODE_RDID;
-+ u8 id[3];
-+ u32 jedec;
-+ struct flash_info *info;
-+
-+ /* JEDEC also defines an optional "extended device information"
-+ * string for after vendor-specific data, after the three bytes
-+ * we use here. Supporting some chips might require using it.
-+ */
-+ tmp = spi_write_then_read(spi, &code, 1, id, 3);
-+ if (tmp < 0) {
-+ DEBUG(MTD_DEBUG_LEVEL0, "%s: error %d reading JEDEC ID\n",
-+ spi->dev.bus_id, tmp);
-+ return NULL;
-+ }
-+ jedec = id[0];
-+ jedec = jedec << 8;
-+ jedec |= id[1];
-+ jedec = jedec << 8;
-+ jedec |= id[2];
-+
-+ for (tmp = 0, info = m25p_data;
-+ tmp < ARRAY_SIZE(m25p_data);
-+ tmp++, info++) {
-+ if (info->jedec_id == jedec)
-+ return info;
-+ }
-+ dev_err(&spi->dev, "unrecognized JEDEC id %06x\n", jedec);
-+ return NULL;
-+}
-+
-+
- /*
- * board specific setup should have ensured the SPI clock used here
- * matches what the READ command supports, at least until this driver
-@@ -429,37 +531,51 @@ static int __devinit m25p_probe(struct s
- unsigned i;
-
- /* Platform data helps sort out which chip type we have, as
-- * well as how this board partitions it.
-+ * well as how this board partitions it. If we don't have
-+ * a chip ID, try the JEDEC id commands; they'll work for most
-+ * newer chips, even if we don't recognize the particular chip.
- */
- data = spi->dev.platform_data;
-- if (!data || !data->type) {
-- /* FIXME some chips can identify themselves with RES
-- * or JEDEC get-id commands. Try them ...
-- */
-- DEBUG(MTD_DEBUG_LEVEL1, "%s: no chip id\n",
-- spi->dev.bus_id);
-- return -ENODEV;
-- }
-+ if (data && data->type) {
-+ for (i = 0, info = m25p_data;
-+ i < ARRAY_SIZE(m25p_data);
-+ i++, info++) {
-+ if (strcmp(data->type, info->name) == 0)
-+ break;
-+ }
-
-- for (i = 0, info = m25p_data; i < ARRAY_SIZE(m25p_data); i++, info++) {
-- if (strcmp(data->type, info->name) == 0)
-- break;
-- }
-- if (i == ARRAY_SIZE(m25p_data)) {
-- DEBUG(MTD_DEBUG_LEVEL1, "%s: unrecognized id %s\n",
-- spi->dev.bus_id, data->type);
-+ /* unrecognized chip? */
-+ if (i == ARRAY_SIZE(m25p_data)) {
-+ DEBUG(MTD_DEBUG_LEVEL0, "%s: unrecognized id %s\n",
-+ spi->dev.bus_id, data->type);
-+ info = NULL;
-+
-+ /* recognized; is that chip really what's there? */
-+ } else if (info->jedec_id) {
-+ struct flash_info *chip = jedec_probe(spi);
-+
-+ if (!chip || chip != info) {
-+ dev_warn(&spi->dev, "found %s, expected %s\n",
-+ chip ? chip->name : "UNKNOWN",
-+ info->name);
-+ info = NULL;
-+ }
-+ }
-+ } else
-+ info = jedec_probe(spi);
-+
-+ if (!info)
- return -ENODEV;
-- }
-
- flash = kzalloc(sizeof *flash, GFP_KERNEL);
- if (!flash)
- return -ENOMEM;
-
- flash->spi = spi;
-- init_MUTEX(&flash->lock);
-+ mutex_init(&flash->lock);
- dev_set_drvdata(&spi->dev, flash);
-
-- if (data->name)
-+ if (data && data->name)
- flash->mtd.name = data->name;
- else
- flash->mtd.name = spi->dev.bus_id;
-@@ -468,17 +584,25 @@ static int __devinit m25p_probe(struct s
- flash->mtd.writesize = 1;
- flash->mtd.flags = MTD_CAP_NORFLASH;
- flash->mtd.size = info->sector_size * info->n_sectors;
-- flash->mtd.erasesize = info->sector_size;
- flash->mtd.erase = m25p80_erase;
- flash->mtd.read = m25p80_read;
- flash->mtd.write = m25p80_write;
-
-+ /* prefer "small sector" erase if possible */
-+ if (info->flags & SECT_4K) {
-+ flash->erase_opcode = OPCODE_BE_4K;
-+ flash->mtd.erasesize = 4096;
-+ } else {
-+ flash->erase_opcode = OPCODE_SE;
-+ flash->mtd.erasesize = info->sector_size;
-+ }
-+
- dev_info(&spi->dev, "%s (%d Kbytes)\n", info->name,
- flash->mtd.size / 1024);
-
- DEBUG(MTD_DEBUG_LEVEL2,
-- "mtd .name = %s, .size = 0x%.8x (%uM) "
-- ".erasesize = 0x%.8x (%uK) .numeraseregions = %d\n",
-+ "mtd .name = %s, .size = 0x%.8x (%uMiB) "
-+ ".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n",
- flash->mtd.name,
- flash->mtd.size, flash->mtd.size / (1024*1024),
- flash->mtd.erasesize, flash->mtd.erasesize / 1024,
-@@ -488,7 +612,7 @@ static int __devinit m25p_probe(struct s
- for (i = 0; i < flash->mtd.numeraseregions; i++)
- DEBUG(MTD_DEBUG_LEVEL2,
- "mtd.eraseregions[%d] = { .offset = 0x%.8x, "
-- ".erasesize = 0x%.8x (%uK), "
-+ ".erasesize = 0x%.8x (%uKiB), "
- ".numblocks = %d }\n",
- i, flash->mtd.eraseregions[i].offset,
- flash->mtd.eraseregions[i].erasesize,
-@@ -516,14 +640,14 @@ static int __devinit m25p_probe(struct s
- }
-
- if (nr_parts > 0) {
-- for (i = 0; i < data->nr_parts; i++) {
-+ for (i = 0; i < nr_parts; i++) {
- DEBUG(MTD_DEBUG_LEVEL2, "partitions[%d] = "
- "{.name = %s, .offset = 0x%.8x, "
-- ".size = 0x%.8x (%uK) }\n",
-- i, data->parts[i].name,
-- data->parts[i].offset,
-- data->parts[i].size,
-- data->parts[i].size / 1024);
-+ ".size = 0x%.8x (%uKiB) }\n",
-+ i, parts[i].name,
-+ parts[i].offset,
-+ parts[i].size,
-+ parts[i].size / 1024);
- }
- flash->partitioned = 1;
- return add_mtd_partitions(&flash->mtd, parts, nr_parts);
-@@ -560,6 +684,11 @@ static struct spi_driver m25p80_driver =
- },
- .probe = m25p_probe,
- .remove = __devexit_p(m25p_remove),
-+
-+ /* REVISIT: many of these chips have deep power-down modes, which
-+ * should clearly be entered on suspend() to minimize power use.
-+ * And also when they're otherwise idle...
-+ */
- };
-
-
-Index: linux-2.6.23.17/drivers/mtd/devices/mtd_dataflash.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/mtd/devices/mtd_dataflash.c
-+++ linux-2.6.23.17/drivers/mtd/devices/mtd_dataflash.c
-@@ -14,6 +14,7 @@
- #include <linux/slab.h>
- #include <linux/delay.h>
- #include <linux/device.h>
-+#include <linux/mutex.h>
- #include <linux/spi/spi.h>
- #include <linux/spi/flash.h>
-
-@@ -89,7 +90,7 @@ struct dataflash {
- unsigned short page_offset; /* offset in flash address */
- unsigned int page_size; /* of bytes per page */
-
-- struct semaphore lock;
-+ struct mutex lock;
- struct spi_device *spi;
-
- struct mtd_info mtd;
-@@ -167,7 +168,7 @@ static int dataflash_erase(struct mtd_in
- x.len = 4;
- spi_message_add_tail(&x, &msg);
-
-- down(&priv->lock);
-+ mutex_lock(&priv->lock);
- while (instr->len > 0) {
- unsigned int pageaddr;
- int status;
-@@ -210,7 +211,7 @@ static int dataflash_erase(struct mtd_in
- instr->len -= priv->page_size;
- }
- }
-- up(&priv->lock);
-+ mutex_unlock(&priv->lock);
-
- /* Inform MTD subsystem that erase is complete */
- instr->state = MTD_ERASE_DONE;
-@@ -266,7 +267,7 @@ static int dataflash_read(struct mtd_inf
- x[1].len = len;
- spi_message_add_tail(&x[1], &msg);
-
-- down(&priv->lock);
-+ mutex_lock(&priv->lock);
-
- /* Continuous read, max clock = f(car) which may be less than
- * the peak rate available. Some chips support commands with
-@@ -279,7 +280,7 @@ static int dataflash_read(struct mtd_inf
- /* plus 4 "don't care" bytes */
-
- status = spi_sync(priv->spi, &msg);
-- up(&priv->lock);
-+ mutex_unlock(&priv->lock);
-
- if (status >= 0) {
- *retlen = msg.actual_length - 8;
-@@ -336,7 +337,7 @@ static int dataflash_write(struct mtd_in
- else
- writelen = len;
-
-- down(&priv->lock);
-+ mutex_lock(&priv->lock);
- while (remaining > 0) {
- DEBUG(MTD_DEBUG_LEVEL3, "write @ %i:%i len=%i\n",
- pageaddr, offset, writelen);
-@@ -441,7 +442,7 @@ static int dataflash_write(struct mtd_in
- else
- writelen = remaining;
- }
-- up(&priv->lock);
-+ mutex_unlock(&priv->lock);
-
- return status;
- }
-@@ -463,7 +464,7 @@ add_dataflash(struct spi_device *spi, ch
- if (!priv)
- return -ENOMEM;
-
-- init_MUTEX(&priv->lock);
-+ mutex_init(&priv->lock);
- priv->spi = spi;
- priv->page_size = pagesize;
- priv->page_offset = pageoffset;
-Index: linux-2.6.23.17/drivers/mtd/devices/pmc551.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/mtd/devices/pmc551.c
-+++ linux-2.6.23.17/drivers/mtd/devices/pmc551.c
-@@ -30,8 +30,8 @@
- *
- * Notes:
- * Due to what I assume is more buggy SROM, the 64M PMC551 I
-- * have available claims that all 4 of it's DRAM banks have 64M
-- * of ram configured (making a grand total of 256M onboard).
-+ * have available claims that all 4 of its DRAM banks have 64MiB
-+ * of ram configured (making a grand total of 256MiB onboard).
- * This is slightly annoying since the BAR0 size reflects the
- * aperture size, not the dram size, and the V370PDC supplies no
- * other method for memory size discovery. This problem is
-@@ -70,7 +70,7 @@
- * made the memory unusable, added a fix to code to touch up
- * the DRAM some.
- *
-- * Bugs/FIXME's:
-+ * Bugs/FIXMEs:
- * * MUST fix the init function to not spin on a register
- * waiting for it to set .. this does not safely handle busted
- * devices that never reset the register correctly which will
-@@ -562,10 +562,10 @@ static u32 fixup_pmc551(struct pci_dev *
- /*
- * Some screen fun
- */
-- printk(KERN_DEBUG "pmc551: %d%c (0x%x) of %sprefetchable memory at "
-+ printk(KERN_DEBUG "pmc551: %d%sB (0x%x) of %sprefetchable memory at "
- "0x%llx\n", (size < 1024) ? size : (size < 1048576) ?
- size >> 10 : size >> 20,
-- (size < 1024) ? 'B' : (size < 1048576) ? 'K' : 'M', size,
-+ (size < 1024) ? "" : (size < 1048576) ? "Ki" : "Mi", size,
- ((dcmd & (0x1 << 3)) == 0) ? "non-" : "",
- (unsigned long long)pci_resource_start(dev, 0));
-
-@@ -649,14 +649,10 @@ MODULE_DESCRIPTION(PMC551_VERSION);
- * Stuff these outside the ifdef so as to not bust compiled in driver support
- */
- static int msize = 0;
--#if defined(CONFIG_MTD_PMC551_APERTURE_SIZE)
--static int asize = CONFIG_MTD_PMC551_APERTURE_SIZE;
--#else
- static int asize = 0;
--#endif
-
- module_param(msize, int, 0);
--MODULE_PARM_DESC(msize, "memory size in Megabytes [1 - 1024]");
-+MODULE_PARM_DESC(msize, "memory size in MiB [1 - 1024]");
- module_param(asize, int, 0);
- MODULE_PARM_DESC(asize, "aperture size, must be <= memsize [1-1024]");
-
-@@ -799,8 +795,7 @@ static int __init init_pmc551(void)
- mtd->owner = THIS_MODULE;
-
- if (add_mtd_device(mtd)) {
-- printk(KERN_NOTICE "pmc551: Failed to register new "
-- "device\n");
-+ printk(KERN_NOTICE "pmc551: Failed to register new device\n");
- pci_iounmap(PCI_Device, priv->start);
- kfree(mtd->priv);
- kfree(mtd);
-@@ -811,13 +806,13 @@ static int __init init_pmc551(void)
- pci_dev_get(PCI_Device);
-
- printk(KERN_NOTICE "Registered pmc551 memory device.\n");
-- printk(KERN_NOTICE "Mapped %dM of memory from 0x%p to 0x%p\n",
-+ printk(KERN_NOTICE "Mapped %dMiB of memory from 0x%p to 0x%p\n",
- priv->asize >> 20,
- priv->start, priv->start + priv->asize);
-- printk(KERN_NOTICE "Total memory is %d%c\n",
-+ printk(KERN_NOTICE "Total memory is %d%sB\n",
- (length < 1024) ? length :
- (length < 1048576) ? length >> 10 : length >> 20,
-- (length < 1024) ? 'B' : (length < 1048576) ? 'K' : 'M');
-+ (length < 1024) ? "" : (length < 1048576) ? "Ki" : "Mi");
- priv->nextpmc551 = pmc551list;
- pmc551list = mtd;
- found++;
-@@ -850,7 +845,7 @@ static void __exit cleanup_pmc551(void)
- pmc551list = priv->nextpmc551;
-
- if (priv->start) {
-- printk(KERN_DEBUG "pmc551: unmapping %dM starting at "
-+ printk(KERN_DEBUG "pmc551: unmapping %dMiB starting at "
- "0x%p\n", priv->asize >> 20, priv->start);
- pci_iounmap(priv->dev, priv->start);
- }
-Index: linux-2.6.23.17/drivers/mtd/maps/nettel.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/mtd/maps/nettel.c
-+++ linux-2.6.23.17/drivers/mtd/maps/nettel.c
-@@ -158,68 +158,11 @@ static struct notifier_block nettel_noti
- nettel_reboot_notifier, NULL, 0
- };
-
--/*
-- * Erase the configuration file system.
-- * Used to support the software reset button.
-- */
--static void nettel_erasecallback(struct erase_info *done)
--{
-- wait_queue_head_t *wait_q = (wait_queue_head_t *)done->priv;
-- wake_up(wait_q);
--}
--
--static struct erase_info nettel_erase;
--
--int nettel_eraseconfig(void)
--{
-- struct mtd_info *mtd;
-- DECLARE_WAITQUEUE(wait, current);
-- wait_queue_head_t wait_q;
-- int ret;
--
-- init_waitqueue_head(&wait_q);
-- mtd = get_mtd_device(NULL, 2);
-- if (!IS_ERR(mtd)) {
-- nettel_erase.mtd = mtd;
-- nettel_erase.callback = nettel_erasecallback;
-- nettel_erase.callback = NULL;
-- nettel_erase.addr = 0;
-- nettel_erase.len = mtd->size;
-- nettel_erase.priv = (u_long) &wait_q;
-- nettel_erase.priv = 0;
--
-- set_current_state(TASK_INTERRUPTIBLE);
-- add_wait_queue(&wait_q, &wait);
--
-- ret = mtd->erase(mtd, &nettel_erase);
-- if (ret) {
-- set_current_state(TASK_RUNNING);
-- remove_wait_queue(&wait_q, &wait);
-- put_mtd_device(mtd);
-- return(ret);
-- }
--
-- schedule(); /* Wait for erase to finish. */
-- remove_wait_queue(&wait_q, &wait);
--
-- put_mtd_device(mtd);
-- }
--
-- return(0);
--}
--
--#else
--
--int nettel_eraseconfig(void)
--{
-- return(0);
--}
--
- #endif
-
- /****************************************************************************/
-
--int __init nettel_init(void)
-+static int __init nettel_init(void)
- {
- volatile unsigned long *amdpar;
- unsigned long amdaddr, maxsize;
-@@ -421,10 +364,6 @@ int __init nettel_init(void)
-
- intel_mtd->owner = THIS_MODULE;
-
--#ifndef CONFIG_BLK_DEV_INITRD
-- ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, 1);
--#endif
--
- num_intel_partitions = sizeof(nettel_intel_partitions) /
- sizeof(nettel_intel_partitions[0]);
-
-@@ -477,7 +416,7 @@ out_unmap2:
-
- /****************************************************************************/
-
--void __exit nettel_cleanup(void)
-+static void __exit nettel_cleanup(void)
- {
- #ifdef CONFIG_MTD_CFI_INTELEXT
- unregister_reboot_notifier(&nettel_notifier_block);
-Index: linux-2.6.23.17/drivers/mtd/maps/pmcmsp-ramroot.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/mtd/maps/pmcmsp-ramroot.c
-+++ linux-2.6.23.17/drivers/mtd/maps/pmcmsp-ramroot.c
-@@ -79,7 +79,6 @@ static int __init init_rrmap(void)
- rr_mtd->owner = THIS_MODULE;
-
- add_mtd_device(rr_mtd);
-- ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, rr_mtd->index);
-
- return 0;
- }
-Index: linux-2.6.23.17/drivers/mtd/mtd_blkdevs.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/mtd/mtd_blkdevs.c
-+++ linux-2.6.23.17/drivers/mtd/mtd_blkdevs.c
-@@ -24,10 +24,9 @@
- #include <linux/kthread.h>
- #include <asm/uaccess.h>
-
--static LIST_HEAD(blktrans_majors);
-+#include "mtdcore.h"
-
--extern struct mutex mtd_table_mutex;
--extern struct mtd_info *mtd_table[];
-+static LIST_HEAD(blktrans_majors);
-
- struct mtd_blkcore_priv {
- struct task_struct *thread;
-@@ -202,7 +201,7 @@ static int blktrans_ioctl(struct inode *
- }
- }
-
--struct block_device_operations mtd_blktrans_ops = {
-+static struct block_device_operations mtd_blktrans_ops = {
- .owner = THIS_MODULE,
- .open = blktrans_open,
- .release = blktrans_release,
-Index: linux-2.6.23.17/drivers/mtd/mtdchar.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/mtd/mtdchar.c
-+++ linux-2.6.23.17/drivers/mtd/mtdchar.c
-@@ -137,7 +137,8 @@ static int mtd_close(struct inode *inode
-
- DEBUG(MTD_DEBUG_LEVEL0, "MTD_close\n");
-
-- if (mtd->sync)
-+ /* Only sync if opened RW */
-+ if ((file->f_mode & 2) && mtd->sync)
- mtd->sync(mtd);
-
- put_mtd_device(mtd);
-Index: linux-2.6.23.17/drivers/mtd/mtdcore.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/mtd/mtdcore.c
-+++ linux-2.6.23.17/drivers/mtd/mtdcore.c
-@@ -22,6 +22,8 @@
-
- #include <linux/mtd/mtd.h>
-
-+#include "mtdcore.h"
-+
- /* These are exported solely for the purpose of mtd_blkdevs.c. You
- should not use them for _anything_ else */
- DEFINE_MUTEX(mtd_table_mutex);
-Index: linux-2.6.23.17/drivers/mtd/nand/Kconfig
-===================================================================
---- linux-2.6.23.17.orig/drivers/mtd/nand/Kconfig
-+++ linux-2.6.23.17/drivers/mtd/nand/Kconfig
-@@ -134,10 +134,10 @@ config MTD_NAND_S3C2410_HWECC
-
- config MTD_NAND_NDFC
- tristate "NDFC NanD Flash Controller"
-- depends on 44x
-+ depends on 4xx
- select MTD_NAND_ECC_SMC
- help
-- NDFC Nand Flash Controllers are integrated in EP44x SoCs
-+ NDFC Nand Flash Controllers are integrated in IBM/AMCC's 4xx SoCs
-
- config MTD_NAND_S3C2410_CLKSTOP
- bool "S3C2410 NAND IDLE clock stop"
-@@ -237,7 +237,7 @@ config MTD_NAND_CAFE
- select REED_SOLOMON
- select REED_SOLOMON_DEC16
- help
-- Use NAND flash attached to the CAFÉ chip designed for the $100
-+ Use NAND flash attached to the CAFÉ chip designed for the OLPC
- laptop.
-
- config MTD_NAND_CS553X
-Index: linux-2.6.23.17/drivers/mtd/nand/cafe_nand.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/mtd/nand/cafe_nand.c
-+++ linux-2.6.23.17/drivers/mtd/nand/cafe_nand.c
-@@ -822,14 +822,53 @@ static struct pci_device_id cafe_nand_tb
-
- MODULE_DEVICE_TABLE(pci, cafe_nand_tbl);
-
-+static int cafe_nand_resume(struct pci_dev *pdev)
-+{
-+ uint32_t timing1, timing2, timing3;
-+ uint32_t ctrl;
-+ struct mtd_info *mtd = pci_get_drvdata(pdev);
-+ struct cafe_priv *cafe = mtd->priv;
-+
-+ timing1 = timing2 = timing3 = 0xffffffff;
-+ /* Start off by resetting the NAND controller completely */
-+ cafe_writel(cafe, 1, NAND_RESET);
-+ cafe_writel(cafe, 0, NAND_RESET);
-+ cafe_writel(cafe, timing1, NAND_TIMING1);
-+ cafe_writel(cafe, timing2, NAND_TIMING2);
-+ cafe_writel(cafe, timing3, NAND_TIMING3);
-+ cafe_writel(cafe, 0xffffffff, NAND_IRQ_MASK);
-+
-+ /* Disable master reset, enable NAND clock */
-+ ctrl = cafe_readl(cafe, GLOBAL_CTRL);
-+ ctrl &= 0xffffeff0;
-+ ctrl |= 0x00007000;
-+ cafe_writel(cafe, ctrl | 0x05, GLOBAL_CTRL);
-+ cafe_writel(cafe, ctrl | 0x0a, GLOBAL_CTRL);
-+ cafe_writel(cafe, 0, NAND_DMA_CTRL);
-+ cafe_writel(cafe, 0x7006, GLOBAL_CTRL);
-+ cafe_writel(cafe, 0x700a, GLOBAL_CTRL);
-+
-+ /* Set up DMA address */
-+ cafe_writel(cafe, cafe->dmaaddr & 0xffffffff, NAND_DMA_ADDR0);
-+ if (sizeof(cafe->dmaaddr) > 4)
-+ /* Shift in two parts to shut the compiler up */
-+ cafe_writel(cafe, (cafe->dmaaddr >> 16) >> 16, NAND_DMA_ADDR1);
-+ else
-+ cafe_writel(cafe, 0, NAND_DMA_ADDR1);
-+
-+ /* Enable NAND IRQ in global IRQ mask register */
-+ cafe_writel(cafe, 0x80000007, GLOBAL_IRQ_MASK);
-+ return 0;
-+}
-+
- static struct pci_driver cafe_nand_pci_driver = {
- .name = "CAFÉ NAND",
- .id_table = cafe_nand_tbl,
- .probe = cafe_nand_probe,
- .remove = __devexit_p(cafe_nand_remove),
-+ .resume = cafe_nand_resume,
- #ifdef CONFIG_PMx
- .suspend = cafe_nand_suspend,
-- .resume = cafe_nand_resume,
- #endif
- };
-
-Index: linux-2.6.23.17/drivers/mtd/nand/ndfc.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/mtd/nand/ndfc.c
-+++ linux-2.6.23.17/drivers/mtd/nand/ndfc.c
-@@ -24,7 +24,11 @@
- #include <linux/platform_device.h>
-
- #include <asm/io.h>
-+#ifdef CONFIG_40x
-+#include <asm/ibm405.h>
-+#else
- #include <asm/ibm44x.h>
-+#endif
-
- struct ndfc_nand_mtd {
- struct mtd_info mtd;
-@@ -230,7 +234,11 @@ static int ndfc_nand_probe(struct platfo
- struct ndfc_controller *ndfc = &ndfc_ctrl;
- unsigned long long phys = settings->ndfc_erpn | res->start;
-
-+#ifndef CONFIG_PHYS_64BIT
-+ ndfc->ndfcbase = ioremap((phys_addr_t)phys, res->end - res->start + 1);
-+#else
- ndfc->ndfcbase = ioremap64(phys, res->end - res->start + 1);
-+#endif
- if (!ndfc->ndfcbase) {
- printk(KERN_ERR "NDFC: ioremap failed\n");
- return -EIO;
-Index: linux-2.6.23.17/drivers/mtd/onenand/Kconfig
-===================================================================
---- linux-2.6.23.17.orig/drivers/mtd/onenand/Kconfig
-+++ linux-2.6.23.17/drivers/mtd/onenand/Kconfig
-@@ -40,4 +40,27 @@ config MTD_ONENAND_OTP
-
- OTP block is fully-guaranteed to be a valid block.
-
-+config MTD_ONENAND_2X_PROGRAM
-+ bool "OneNAND 2X program support"
-+ help
-+ The 2X Program is an extension of Program Operation.
-+ Since the device is equipped with two DataRAMs, and two-plane NAND
-+ Flash memory array, these two component enables simultaneous program
-+ of 4KiB. Plane1 has only even blocks such as block0, block2, block4
-+ while Plane2 has only odd blocks such as block1, block3, block5.
-+ So MTD regards it as 4KiB page size and 256KiB block size
-+
-+ Now the following chips support it. (KFXXX16Q2M)
-+ Demux: KFG2G16Q2M, KFH4G16Q2M, KFW8G16Q2M,
-+ Mux: KFM2G16Q2M, KFN4G16Q2M,
-+
-+ And more recent chips
-+
-+config MTD_ONENAND_SIM
-+ tristate "OneNAND simulator support"
-+ depends on MTD_PARTITIONS
-+ help
-+ The simulator may simulate various OneNAND flash chips for the
-+ OneNAND MTD layer.
-+
- endif # MTD_ONENAND
-Index: linux-2.6.23.17/drivers/mtd/onenand/Makefile
-===================================================================
---- linux-2.6.23.17.orig/drivers/mtd/onenand/Makefile
-+++ linux-2.6.23.17/drivers/mtd/onenand/Makefile
-@@ -8,4 +8,7 @@ obj-$(CONFIG_MTD_ONENAND) += onenand.o
- # Board specific.
- obj-$(CONFIG_MTD_ONENAND_GENERIC) += generic.o
-
-+# Simulator
-+obj-$(CONFIG_MTD_ONENAND_SIM) += onenand_sim.o
-+
- onenand-objs = onenand_base.o onenand_bbt.o
-Index: linux-2.6.23.17/drivers/mtd/onenand/onenand_base.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/mtd/onenand/onenand_base.c
-+++ linux-2.6.23.17/drivers/mtd/onenand/onenand_base.c
-@@ -206,6 +206,15 @@ static int onenand_command(struct mtd_in
- default:
- block = (int) (addr >> this->erase_shift);
- page = (int) (addr >> this->page_shift);
-+
-+ if (ONENAND_IS_2PLANE(this)) {
-+ /* Make the even block number */
-+ block &= ~1;
-+ /* Is it the odd plane? */
-+ if (addr & this->writesize)
-+ block++;
-+ page >>= 1;
-+ }
- page &= this->page_mask;
- break;
- }
-@@ -216,8 +225,12 @@ static int onenand_command(struct mtd_in
- value = onenand_bufferram_address(this, block);
- this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
-
-- /* Switch to the next data buffer */
-- ONENAND_SET_NEXT_BUFFERRAM(this);
-+ if (ONENAND_IS_2PLANE(this))
-+ /* It is always BufferRAM0 */
-+ ONENAND_SET_BUFFERRAM0(this);
-+ else
-+ /* Switch to the next data buffer */
-+ ONENAND_SET_NEXT_BUFFERRAM(this);
-
- return 0;
- }
-@@ -247,6 +260,8 @@ static int onenand_command(struct mtd_in
- break;
-
- default:
-+ if (ONENAND_IS_2PLANE(this) && cmd == ONENAND_CMD_PROG)
-+ cmd = ONENAND_CMD_2X_PROG;
- dataram = ONENAND_CURRENT_BUFFERRAM(this);
- break;
- }
-@@ -445,8 +460,9 @@ static inline int onenand_bufferram_offs
- struct onenand_chip *this = mtd->priv;
-
- if (ONENAND_CURRENT_BUFFERRAM(this)) {
-+ /* Note: the 'this->writesize' is a real page size */
- if (area == ONENAND_DATARAM)
-- return mtd->writesize;
-+ return this->writesize;
- if (area == ONENAND_SPARERAM)
- return mtd->oobsize;
- }
-@@ -572,6 +588,30 @@ static int onenand_write_bufferram(struc
- }
-
- /**
-+ * onenand_get_2x_blockpage - [GENERIC] Get blockpage at 2x program mode
-+ * @param mtd MTD data structure
-+ * @param addr address to check
-+ * @return blockpage address
-+ *
-+ * Get blockpage address at 2x program mode
-+ */
-+static int onenand_get_2x_blockpage(struct mtd_info *mtd, loff_t addr)
-+{
-+ struct onenand_chip *this = mtd->priv;
-+ int blockpage, block, page;
-+
-+ /* Calculate the even block number */
-+ block = (int) (addr >> this->erase_shift) & ~1;
-+ /* Is it the odd plane? */
-+ if (addr & this->writesize)
-+ block++;
-+ page = (int) (addr >> (this->page_shift + 1)) & this->page_mask;
-+ blockpage = (block << 7) | page;
-+
-+ return blockpage;
-+}
-+
-+/**
- * onenand_check_bufferram - [GENERIC] Check BufferRAM information
- * @param mtd MTD data structure
- * @param addr address to check
-@@ -585,7 +625,10 @@ static int onenand_check_bufferram(struc
- int blockpage, found = 0;
- unsigned int i;
-
-- blockpage = (int) (addr >> this->page_shift);
-+ if (ONENAND_IS_2PLANE(this))
-+ blockpage = onenand_get_2x_blockpage(mtd, addr);
-+ else
-+ blockpage = (int) (addr >> this->page_shift);
-
- /* Is there valid data? */
- i = ONENAND_CURRENT_BUFFERRAM(this);
-@@ -625,7 +668,10 @@ static void onenand_update_bufferram(str
- int blockpage;
- unsigned int i;
-
-- blockpage = (int) (addr >> this->page_shift);
-+ if (ONENAND_IS_2PLANE(this))
-+ blockpage = onenand_get_2x_blockpage(mtd, addr);
-+ else
-+ blockpage = (int) (addr >> this->page_shift);
-
- /* Invalidate another BufferRAM */
- i = ONENAND_NEXT_BUFFERRAM(this);
-@@ -734,6 +780,7 @@ static int onenand_read(struct mtd_info
- int read = 0, column;
- int thislen;
- int ret = 0, boundary = 0;
-+ int writesize = this->writesize;
-
- DEBUG(MTD_DEBUG_LEVEL3, "onenand_read: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
-
-@@ -754,22 +801,22 @@ static int onenand_read(struct mtd_info
- /* Do first load to bufferRAM */
- if (read < len) {
- if (!onenand_check_bufferram(mtd, from)) {
-- this->command(mtd, ONENAND_CMD_READ, from, mtd->writesize);
-+ this->command(mtd, ONENAND_CMD_READ, from, writesize);
- ret = this->wait(mtd, FL_READING);
- onenand_update_bufferram(mtd, from, !ret);
- }
- }
-
-- thislen = min_t(int, mtd->writesize, len - read);
-- column = from & (mtd->writesize - 1);
-- if (column + thislen > mtd->writesize)
-- thislen = mtd->writesize - column;
-+ thislen = min_t(int, writesize, len - read);
-+ column = from & (writesize - 1);
-+ if (column + thislen > writesize)
-+ thislen = writesize - column;
-
- while (!ret) {
- /* If there is more to load then start next load */
- from += thislen;
- if (read + thislen < len) {
-- this->command(mtd, ONENAND_CMD_READ, from, mtd->writesize);
-+ this->command(mtd, ONENAND_CMD_READ, from, writesize);
- /*
- * Chip boundary handling in DDP
- * Now we issued chip 1 read and pointed chip 1
-@@ -794,7 +841,7 @@ static int onenand_read(struct mtd_info
- this->write_word(ONENAND_DDP_CHIP1, this->base + ONENAND_REG_START_ADDRESS2);
- ONENAND_SET_NEXT_BUFFERRAM(this);
- buf += thislen;
-- thislen = min_t(int, mtd->writesize, len - read);
-+ thislen = min_t(int, writesize, len - read);
- column = 0;
- cond_resched();
- /* Now wait for load */
-@@ -1079,7 +1126,7 @@ int onenand_bbt_read_oob(struct mtd_info
- /* Read more? */
- if (read < len) {
- /* Update Page size */
-- from += mtd->writesize;
-+ from += this->writesize;
- column = 0;
- }
- }
-@@ -1135,12 +1182,12 @@ static int onenand_verify(struct mtd_inf
- int thislen, column;
-
- while (len != 0) {
-- thislen = min_t(int, mtd->writesize, len);
-- column = addr & (mtd->writesize - 1);
-- if (column + thislen > mtd->writesize)
-- thislen = mtd->writesize - column;
-+ thislen = min_t(int, this->writesize, len);
-+ column = addr & (this->writesize - 1);
-+ if (column + thislen > this->writesize)
-+ thislen = this->writesize - column;
-
-- this->command(mtd, ONENAND_CMD_READ, addr, mtd->writesize);
-+ this->command(mtd, ONENAND_CMD_READ, addr, this->writesize);
-
- onenand_update_bufferram(mtd, addr, 0);
-
-@@ -1236,6 +1283,10 @@ static int onenand_write(struct mtd_info
-
- /* In partial page write we don't update bufferram */
- onenand_update_bufferram(mtd, to, !ret && !subpage);
-+ if (ONENAND_IS_2PLANE(this)) {
-+ ONENAND_SET_BUFFERRAM1(this);
-+ onenand_update_bufferram(mtd, to + this->writesize, !ret && !subpage);
-+ }
-
- if (ret) {
- printk(KERN_ERR "onenand_write: write filaed %d\n", ret);
-@@ -1384,6 +1435,10 @@ static int onenand_do_write_oob(struct m
- this->command(mtd, ONENAND_CMD_PROGOOB, to, mtd->oobsize);
-
- onenand_update_bufferram(mtd, to, 0);
-+ if (ONENAND_IS_2PLANE(this)) {
-+ ONENAND_SET_BUFFERRAM1(this);
-+ onenand_update_bufferram(mtd, to + this->writesize, 0);
-+ }
-
- ret = this->wait(mtd, FL_WRITING);
- if (ret) {
-@@ -2107,6 +2162,7 @@ static int onenand_lock_user_prot_reg(st
- *
- * Check and set OneNAND features
- * - lock scheme
-+ * - two plane
- */
- static void onenand_check_features(struct mtd_info *mtd)
- {
-@@ -2118,19 +2174,35 @@ static void onenand_check_features(struc
- process = this->version_id >> ONENAND_VERSION_PROCESS_SHIFT;
-
- /* Lock scheme */
-- if (density >= ONENAND_DEVICE_DENSITY_1Gb) {
-+ switch (density) {
-+ case ONENAND_DEVICE_DENSITY_4Gb:
-+ this->options |= ONENAND_HAS_2PLANE;
-+
-+ case ONENAND_DEVICE_DENSITY_2Gb:
-+ /* 2Gb DDP don't have 2 plane */
-+ if (!ONENAND_IS_DDP(this))
-+ this->options |= ONENAND_HAS_2PLANE;
-+ this->options |= ONENAND_HAS_UNLOCK_ALL;
-+
-+ case ONENAND_DEVICE_DENSITY_1Gb:
- /* A-Die has all block unlock */
-- if (process) {
-- printk(KERN_DEBUG "Chip support all block unlock\n");
-+ if (process)
- this->options |= ONENAND_HAS_UNLOCK_ALL;
-- }
-- } else {
-- /* Some OneNAND has continues lock scheme */
-- if (!process) {
-- printk(KERN_DEBUG "Lock scheme is Continues Lock\n");
-+ break;
-+
-+ default:
-+ /* Some OneNAND has continuous lock scheme */
-+ if (!process)
- this->options |= ONENAND_HAS_CONT_LOCK;
-- }
-+ break;
- }
-+
-+ if (this->options & ONENAND_HAS_CONT_LOCK)
-+ printk(KERN_DEBUG "Lock scheme is Continuous Lock\n");
-+ if (this->options & ONENAND_HAS_UNLOCK_ALL)
-+ printk(KERN_DEBUG "Chip support all block unlock\n");
-+ if (this->options & ONENAND_HAS_2PLANE)
-+ printk(KERN_DEBUG "Chip has 2 plane\n");
- }
-
- /**
-@@ -2257,6 +2329,8 @@ static int onenand_probe(struct mtd_info
- this->erase_shift = ffs(mtd->erasesize) - 1;
- this->page_shift = ffs(mtd->writesize) - 1;
- this->page_mask = (1 << (this->erase_shift - this->page_shift)) - 1;
-+ /* It's real page size */
-+ this->writesize = mtd->writesize;
-
- /* REVIST: Multichip handling */
-
-@@ -2265,6 +2339,17 @@ static int onenand_probe(struct mtd_info
- /* Check OneNAND features */
- onenand_check_features(mtd);
-
-+ /*
-+ * We emulate the 4KiB page and 256KiB erase block size
-+ * But oobsize is still 64 bytes.
-+ * It is only valid if you turn on 2X program support,
-+ * Otherwise it will be ignored by compiler.
-+ */
-+ if (ONENAND_IS_2PLANE(this)) {
-+ mtd->writesize <<= 1;
-+ mtd->erasesize <<= 1;
-+ }
-+
- return 0;
- }
-
-Index: linux-2.6.23.17/drivers/pci/quirks.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/pci/quirks.c
-+++ linux-2.6.23.17/drivers/pci/quirks.c
-@@ -1396,6 +1396,17 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN
- DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260b, quirk_intel_pcie_pm);
-
- /*
-+ * According to Tom Sylla, the Geode does not support PCI power management
-+ * transition, so we shouldn't need the D3hot delay.
-+ */
-+static void __init quirk_geode_pci_pm(struct pci_dev *dev)
-+{
-+ pci_pm_d3_delay = 0;
-+}
-+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, quirk_geode_pci_pm);
-+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, quirk_geode_pci_pm);
-+
-+/*
- * Toshiba TC86C001 IDE controller reports the standard 8-byte BAR0 size
- * but the PIO transfers won't work if BAR0 falls at the odd 8 bytes.
- * Re-allocate the region if needed...
-Index: linux-2.6.23.17/drivers/video/Kconfig
-===================================================================
---- linux-2.6.23.17.orig/drivers/video/Kconfig
-+++ linux-2.6.23.17/drivers/video/Kconfig
-@@ -594,7 +594,7 @@ config FB_TGA
-
- config FB_VESA
- bool "VESA VGA graphics support"
-- depends on (FB = y) && X86
-+ depends on (FB = y) && X86 && !VGA_NOPROBE
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
-@@ -1028,7 +1028,7 @@ config FB_CARILLO_RANCH
-
- config FB_INTEL
- tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G support (EXPERIMENTAL)"
-- depends on FB && EXPERIMENTAL && PCI && X86
-+ depends on FB && EXPERIMENTAL && PCI && X86 && !VGA_NOPROBE
- select AGP
- select AGP_INTEL
- select FB_MODE_HELPERS
-@@ -1383,7 +1383,7 @@ config FB_SAVAGE_ACCEL
-
- config FB_SIS
- tristate "SiS/XGI display support"
-- depends on FB && PCI
-+ depends on FB && PCI && !VGA_NOPROBE
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
-@@ -1822,6 +1822,15 @@ config FB_PS3_DEFAULT_SIZE_M
- The default value can be overridden on the kernel command line
- using the "ps3fb" option (e.g. "ps3fb=9M");
-
-+config FB_OLPC_DCON
-+ tristate "One Laptop Per Child Display CONtroller support"
-+ depends on OLPC
-+ select I2C
-+ ---help---
-+ Add support for the OLPC DCON controller. This controller is only
-+ available on OLPC platforms. Unless you have one of these
-+ platforms, you will want to say 'N'.
-+
- config FB_XILINX
- tristate "Xilinx frame buffer support"
- depends on FB && XILINX_VIRTEX
-Index: linux-2.6.23.17/drivers/video/Makefile
-===================================================================
---- linux-2.6.23.17.orig/drivers/video/Makefile
-+++ linux-2.6.23.17/drivers/video/Makefile
-@@ -111,6 +111,7 @@ obj-$(CONFIG_FB_PNX4008_DUM_RGB) += pnx
- obj-$(CONFIG_FB_IBM_GXT4500) += gxt4500.o
- obj-$(CONFIG_FB_PS3) += ps3fb.o
- obj-$(CONFIG_FB_SM501) += sm501fb.o
-+obj-$(CONFIG_FB_OLPC_DCON) += olpc_dcon.o
- obj-$(CONFIG_FB_XILINX) += xilinxfb.o
- obj-$(CONFIG_FB_OMAP) += omap/
-
-Index: linux-2.6.23.17/drivers/video/fbmem.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/video/fbmem.c
-+++ linux-2.6.23.17/drivers/video/fbmem.c
-@@ -820,6 +820,53 @@ static void try_to_load(int fb)
- #endif /* CONFIG_KMOD */
-
- int
-+fb_powerup(struct fb_info *info)
-+{
-+ int ret = 0;
-+
-+ if (!info || info->state == FBINFO_STATE_RUNNING)
-+ return 0;
-+
-+ if (info->fbops->fb_powerup)
-+ ret = info->fbops->fb_powerup(info);
-+
-+ if (!ret) {
-+ acquire_console_sem();
-+ fb_set_suspend(info, 0);
-+ release_console_sem();
-+ }
-+
-+ return ret;
-+}
-+
-+int
-+fb_powerdown(struct fb_info *info)
-+{
-+ int ret = 0;
-+
-+ if (!info || info->state == FBINFO_STATE_SUSPENDED)
-+ return 0;
-+
-+ /* Tell everybody that the fbdev is going down */
-+ acquire_console_sem();
-+ fb_set_suspend(info, 1);
-+ release_console_sem();
-+
-+ if (info->fbops->fb_powerdown)
-+ ret = info->fbops->fb_powerdown(info);
-+
-+ /* If the power down failed, then un-notify */
-+
-+ if (ret) {
-+ acquire_console_sem();
-+ fb_set_suspend(info, 0);
-+ release_console_sem();
-+ }
-+
-+ return ret;
-+}
-+
-+int
- fb_pan_display(struct fb_info *info, struct fb_var_screeninfo *var)
- {
- struct fb_fix_screeninfo *fix = &info->fix;
-Index: linux-2.6.23.17/drivers/video/geode/Makefile
-===================================================================
---- linux-2.6.23.17.orig/drivers/video/geode/Makefile
-+++ linux-2.6.23.17/drivers/video/geode/Makefile
-@@ -5,5 +5,5 @@ obj-$(CONFIG_FB_GEODE_GX) += gxfb.o
- obj-$(CONFIG_FB_GEODE_LX) += lxfb.o
-
- gx1fb-objs := gx1fb_core.o display_gx1.o video_cs5530.o
--gxfb-objs := gxfb_core.o display_gx.o video_gx.o
-+gxfb-objs := gxfb_core.o display_gx.o video_gx.o suspend_gx.o
- lxfb-objs := lxfb_core.o lxfb_ops.o
-Index: linux-2.6.23.17/drivers/video/geode/display_gx.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/video/geode/display_gx.c
-+++ linux-2.6.23.17/drivers/video/geode/display_gx.c
-@@ -11,26 +11,44 @@
- * Free Software Foundation; either version 2 of the License, or * (at your
- * option) any later version.
- */
-+
-+#include <linux/kernel.h>
- #include <linux/spinlock.h>
- #include <linux/fb.h>
- #include <linux/delay.h>
- #include <asm/io.h>
- #include <asm/div64.h>
- #include <asm/delay.h>
-+#include <asm/olpc.h>
-
- #include "geodefb.h"
- #include "display_gx.h"
-
--#ifdef CONFIG_FB_GEODE_GX_SET_FBSIZE
--unsigned int gx_frame_buffer_size(void)
-+static inline void rmwl(u32 val, u32 *reg)
- {
-- return CONFIG_FB_GEODE_GX_FBSIZE;
-+ u32 in = readl(reg);
-+ if (in != val)
-+ writel(val, reg);
- }
--#else
-+
- unsigned int gx_frame_buffer_size(void)
- {
- unsigned int val;
-
-+#ifdef CONFIG_OLPC
-+ if (machine_is_olpc() && !olpc_has_vsa()) {
-+ u32 hi,lo;
-+ rdmsr(GLIU0_P2D_RO0, lo, hi);
-+
-+ /* Top page number */
-+ val = ((hi & 0xff) << 12) | ((lo & 0xfff00000) >> 20);
-+
-+ val -= (lo & 0x000fffff); /* Subtract bottom page number */
-+ val += 1; /* Adjust page count */
-+ return (val << 12);
-+ }
-+#endif
-+
- /* FB size is reported by a virtual register */
- /* Virtual register class = 0x02 */
- /* VG_MEM_SIZE(512Kb units) = 0x00 */
-@@ -41,7 +59,6 @@ unsigned int gx_frame_buffer_size(void)
- val = (unsigned int)(inw(0xAC1E)) & 0xFFl;
- return (val << 19);
- }
--#endif
-
- int gx_line_delta(int xres, int bpp)
- {
-@@ -63,23 +80,23 @@ static void gx_set_mode(struct fb_info *
- gcfg = readl(par->dc_regs + DC_GENERAL_CFG);
- dcfg = readl(par->dc_regs + DC_DISPLAY_CFG);
-
-- /* Disable the timing generator. */
-- dcfg &= ~(DC_DCFG_TGEN);
-- writel(dcfg, par->dc_regs + DC_DISPLAY_CFG);
--
-- /* Wait for pending memory requests before disabling the FIFO load. */
-- udelay(100);
--
-- /* Disable FIFO load and compression. */
-- gcfg &= ~(DC_GCFG_DFLE | DC_GCFG_CMPE | DC_GCFG_DECE);
-- writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
--
-- /* Setup DCLK and its divisor. */
-- par->vid_ops->set_dclk(info);
--
-- /*
-- * Setup new mode.
-- */
-+ /* Programming the clock is costly and ugly, so avoid if if we can */
-+
-+ if (par->curdclk != info->var.pixclock) {
-+ /* Disable the timing generator. */
-+ dcfg &= ~(DC_DCFG_TGEN);
-+ writel(dcfg, par->dc_regs + DC_DISPLAY_CFG);
-+
-+ /* Wait for pending memory requests before disabling the FIFO load. */
-+ udelay(100);
-+
-+ /* Disable FIFO load and compression. */
-+ gcfg &= ~(DC_GCFG_DFLE | DC_GCFG_CMPE | DC_GCFG_DECE);
-+ writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
-+
-+ /* Setup DCLK and its divisor. */
-+ par->vid_ops->set_dclk(info);
-+ }
-
- /* Clear all unused feature bits. */
- gcfg &= DC_GCFG_YUVM | DC_GCFG_VDSE;
-@@ -90,12 +107,13 @@ static void gx_set_mode(struct fb_info *
- gcfg |= (6 << DC_GCFG_DFHPEL_POS) | (5 << DC_GCFG_DFHPSL_POS) | DC_GCFG_DFLE;
-
- /* Framebuffer start offset. */
-- writel(0, par->dc_regs + DC_FB_ST_OFFSET);
-+ rmwl(0, par->dc_regs + DC_FB_ST_OFFSET);
-
- /* Line delta and line buffer length. */
-- writel(info->fix.line_length >> 3, par->dc_regs + DC_GFX_PITCH);
-- writel(((info->var.xres * info->var.bits_per_pixel/8) >> 3) + 2,
-- par->dc_regs + DC_LINE_SIZE);
-+ rmwl(info->fix.line_length >> 3, par->dc_regs + DC_GFX_PITCH);
-+
-+ rmwl(((info->var.xres * info->var.bits_per_pixel/8) >> 3) + 2,
-+ par->dc_regs + DC_LINE_SIZE);
-
-
- /* Enable graphics and video data and unmask address lines. */
-@@ -134,17 +152,16 @@ static void gx_set_mode(struct fb_info *
- vblankend = vsyncend + info->var.upper_margin;
- vtotal = vblankend;
-
-- writel((hactive - 1) | ((htotal - 1) << 16), par->dc_regs + DC_H_ACTIVE_TIMING);
-- writel((hblankstart - 1) | ((hblankend - 1) << 16), par->dc_regs + DC_H_BLANK_TIMING);
-- writel((hsyncstart - 1) | ((hsyncend - 1) << 16), par->dc_regs + DC_H_SYNC_TIMING);
--
-- writel((vactive - 1) | ((vtotal - 1) << 16), par->dc_regs + DC_V_ACTIVE_TIMING);
-- writel((vblankstart - 1) | ((vblankend - 1) << 16), par->dc_regs + DC_V_BLANK_TIMING);
-- writel((vsyncstart - 1) | ((vsyncend - 1) << 16), par->dc_regs + DC_V_SYNC_TIMING);
-+ rmwl((hactive - 1) | ((htotal - 1) << 16), par->dc_regs + DC_H_ACTIVE_TIMING);
-+ rmwl((hblankstart - 1) | ((hblankend - 1) << 16), par->dc_regs + DC_H_BLANK_TIMING);
-+ rmwl((hsyncstart - 1) | ((hsyncend - 1) << 16), par->dc_regs + DC_H_SYNC_TIMING);
-+ rmwl((vactive - 1) | ((vtotal - 1) << 16), par->dc_regs + DC_V_ACTIVE_TIMING);
-+ rmwl((vblankstart - 1) | ((vblankend - 1) << 16), par->dc_regs + DC_V_BLANK_TIMING);
-+ rmwl((vsyncstart - 1) | ((vsyncend - 1) << 16), par->dc_regs + DC_V_SYNC_TIMING);
-
- /* Write final register values. */
-- writel(dcfg, par->dc_regs + DC_DISPLAY_CFG);
-- writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
-+ rmwl(dcfg, par->dc_regs + DC_DISPLAY_CFG);
-+ rmwl(gcfg, par->dc_regs + DC_GENERAL_CFG);
-
- par->vid_ops->configure_display(info);
-
-Index: linux-2.6.23.17/drivers/video/geode/display_gx.h
-===================================================================
---- linux-2.6.23.17.orig/drivers/video/geode/display_gx.h
-+++ linux-2.6.23.17/drivers/video/geode/display_gx.h
-@@ -20,6 +20,9 @@ extern struct geode_dc_ops gx_dc_ops;
- #define GLD_MSR_CONFIG 0xC0002001
- #define GLD_MSR_CONFIG_DM_FP 0x40
-
-+/* Used for memory dection on the OLPC */
-+#define GLIU0_P2D_RO0 0x10000029
-+
- /* Display controller registers */
-
- #define DC_UNLOCK 0x00
-Index: linux-2.6.23.17/drivers/video/geode/geodefb.h
-===================================================================
---- linux-2.6.23.17.orig/drivers/video/geode/geodefb.h
-+++ linux-2.6.23.17/drivers/video/geode/geodefb.h
-@@ -12,6 +12,10 @@
- #ifndef __GEODEFB_H__
- #define __GEODEFB_H__
-
-+#define FB_POWER_STATE_OFF 0
-+#define FB_POWER_STATE_SUSPEND 1
-+#define FB_POWER_STATE_ON 2
-+
- struct geodefb_info;
-
- struct geode_dc_ops {
-@@ -21,18 +25,24 @@ struct geode_dc_ops {
-
- struct geode_vid_ops {
- void (*set_dclk)(struct fb_info *);
-+ unsigned int (*get_dclk)(struct fb_info *);
- void (*configure_display)(struct fb_info *);
- int (*blank_display)(struct fb_info *, int blank_mode);
- };
-
- struct geodefb_par {
- int enable_crt;
-+ int fbactive; /* True if the current console is in KD_GRAPHICS mode */
- int panel_x; /* dimensions of an attached flat panel, non-zero => enable panel */
- int panel_y;
-+ unsigned int curdclk; /* Used by GX to avoid unnessesary clock switching */
- void __iomem *dc_regs;
- void __iomem *vid_regs;
-+ void __iomem *gp_regs;
- struct geode_dc_ops *dc_ops;
- struct geode_vid_ops *vid_ops;
-+
-+ int state;
- };
-
- #endif /* !__GEODEFB_H__ */
-Index: linux-2.6.23.17/drivers/video/geode/gxfb_core.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/video/geode/gxfb_core.c
-+++ linux-2.6.23.17/drivers/video/geode/gxfb_core.c
-@@ -30,12 +30,31 @@
- #include <linux/fb.h>
- #include <linux/init.h>
- #include <linux/pci.h>
-+#include <linux/notifier.h>
-+#include <linux/vt_kern.h>
-+#include <linux/console.h>
-+#include <asm/uaccess.h>
-+#include <asm/olpc.h>
-
- #include "geodefb.h"
- #include "display_gx.h"
- #include "video_gx.h"
-
-+#define FBIOSGAMMA _IOW('F', 0x20, void *)
-+#define FBIOGGAMMA _IOW('F', 0x21, void *)
-+
-+#ifdef DEBUG
-+
-+#define FBIODUMPGP _IOW('F', 0x22, void *)
-+#define FBIODUMPDC _IOW('F', 0x23, void *)
-+#define FBIODUMPVP _IOW('F', 0x24, void *)
-+#define FBIODUMPFP _IOW('F', 0x25, void *)
-+
-+#endif
-+
- static char *mode_option;
-+static int noclear;
-+struct fb_info *gxfb_info;
-
- /* Modes relevant to the GX (taken from modedb.c) */
- static const struct fb_videomode gx_modedb[] __initdata = {
-@@ -103,8 +122,20 @@ static const struct fb_videomode gx_mode
- { NULL, 85, 1600, 1200, 4357, 304, 64, 46, 1, 192, 3,
- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
- FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-+ /* 1200x900-75 - CRT timings for the OLPC mode */
-+ { NULL, 75, 1200, 900, 8049, 104, 240, 29, 54, 136, 3,
-+ 0, FB_VMODE_NONINTERLACED, 0 }
- };
-
-+#ifdef CONFIG_OLPC
-+static const struct fb_videomode gx_dcon_modedb[] __initdata = {
-+ /* The only mode the DCON has is 1200x900 */
-+ { NULL, 50, 1200, 900, 17460, 24, 8, 4, 5, 8, 3,
-+ 0, FB_VMODE_NONINTERLACED, 0 }
-+};
-+#endif
-+
-+
- static int gxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
- {
- if (var->xres > 1600 || var->yres > 1200)
-@@ -137,7 +168,7 @@ static int gxfb_check_var(struct fb_var_
- return 0;
- }
-
--static int gxfb_set_par(struct fb_info *info)
-+int gxfb_set_par(struct fb_info *info)
- {
- struct geodefb_par *par = info->par;
-
-@@ -204,16 +235,26 @@ static int gxfb_blank(int blank_mode, st
- return par->vid_ops->blank_display(info, blank_mode);
- }
-
-+static int fbsize;
-+
- static int __init gxfb_map_video_memory(struct fb_info *info, struct pci_dev *dev)
- {
- struct geodefb_par *par = info->par;
-- int fb_len;
- int ret;
-
- ret = pci_enable_device(dev);
- if (ret < 0)
- return ret;
-
-+ ret = pci_request_region(dev, 1, "gxfb (graphics processor)");
-+ if (ret < 0)
-+ return ret;
-+
-+ par->gp_regs = ioremap(pci_resource_start(dev, 1),
-+ pci_resource_len(dev, 1));
-+ if (!par->gp_regs)
-+ return -ENOMEM;
-+
- ret = pci_request_region(dev, 3, "gxfb (video processor)");
- if (ret < 0)
- return ret;
-@@ -232,36 +273,118 @@ static int __init gxfb_map_video_memory(
- ret = pci_request_region(dev, 0, "gxfb (framebuffer)");
- if (ret < 0)
- return ret;
-- if ((fb_len = gx_frame_buffer_size()) < 0)
-- return -ENOMEM;
-+
-+ /* If the fbsize wasn't specified then try to probe it */
-+
-+ if (!fbsize) {
-+ fbsize = gx_frame_buffer_size();
-+ if (fbsize == 0)
-+ return -ENOMEM;
-+ }
-+
- info->fix.smem_start = pci_resource_start(dev, 0);
-- info->fix.smem_len = fb_len;
-+ info->fix.smem_len = fbsize;
- info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len);
- if (!info->screen_base)
- return -ENOMEM;
-
-- /* Set the 16MB aligned base address of the graphics memory region
-+ /* Set the 16MiB aligned base address of the graphics memory region
- * in the display controller */
-
- writel(info->fix.smem_start & 0xFF000000,
- par->dc_regs + DC_GLIU0_MEM_OFFSET);
-
-- dev_info(&dev->dev, "%d Kibyte of video memory at 0x%lx\n",
-+ dev_info(&dev->dev, "%d KiB of video memory at 0x%lx\n",
- info->fix.smem_len / 1024, info->fix.smem_start);
-
- return 0;
- }
-
-+static int gxfb_ioctl( struct fb_info *info, unsigned int cmd,
-+ unsigned long arg)
-+{
-+ unsigned int gamma[GXFB_GAMMA_DWORDS];
-+ int ret = -EINVAL;
-+ struct geodefb_par *par = info->par;
-+ int i;
-+
-+ switch(cmd) {
-+ case FBIOSGAMMA:
-+ /* Read the gamma information from the user - 256 dwords */
-+
-+ if (copy_from_user(gamma, (void * __user) arg, GXFB_GAMMA_SIZE))
-+ return -EFAULT;
-+
-+ writel(0, par->vid_regs + GX_GAR);
-+
-+ /* Sequential writes to the data register will increment the
-+ address automatically */
-+
-+ for(i = 0; i < GXFB_GAMMA_DWORDS; i++)
-+ writel(gamma[i] & 0xFFFFFF, par->vid_regs + GX_GDR);
-+
-+ writel(readl(par->vid_regs + GX_MISC) & ~GX_MISC_GAM_EN,
-+ par->vid_regs + GX_MISC);
-+
-+ ret = 0;
-+ break;
-+
-+ case FBIOGGAMMA:
-+ if (readl(par->vid_regs + GX_MISC) & GX_MISC_GAM_EN)
-+ return -EINVAL;
-+
-+ memset(gamma, 0, GXFB_GAMMA_SIZE);
-+ writel(0, par->vid_regs + GX_GAR);
-+
-+ for(i = 0; i < GXFB_GAMMA_DWORDS;i++)
-+ gamma[i] = readl(par->vid_regs + GX_GDR);
-+
-+ if (copy_to_user((void * __user) arg, gamma, GXFB_GAMMA_SIZE))
-+ ret = -EFAULT;
-+ else
-+ ret = 0;
-+
-+ break;
-+
-+#ifdef DEBUG
-+ case FBIODUMPGP:
-+ ret = 0;
-+ dump_regs(info, 0);
-+ break;
-+
-+ case FBIODUMPDC:
-+ ret = 0;
-+ dump_regs(info, 1);
-+ break;
-+
-+ case FBIODUMPVP:
-+ ret = 0;
-+ dump_regs(info, 2);
-+ break;
-+
-+ case FBIODUMPFP:
-+ ret = 0;
-+ dump_regs(info, 3);
-+ break;
-+#endif
-+ }
-+
-+ return ret;
-+}
-+
- static struct fb_ops gxfb_ops = {
- .owner = THIS_MODULE,
- .fb_check_var = gxfb_check_var,
- .fb_set_par = gxfb_set_par,
- .fb_setcolreg = gxfb_setcolreg,
- .fb_blank = gxfb_blank,
-+ .fb_ioctl = gxfb_ioctl,
- /* No HW acceleration for now. */
- .fb_fillrect = cfb_fillrect,
- .fb_copyarea = cfb_copyarea,
- .fb_imageblit = cfb_imageblit,
-+ .fb_powerdown = gxfb_powerdown,
-+ .fb_powerup = gxfb_powerup,
- };
-
- static struct fb_info * __init gxfb_init_fbinfo(struct device *dev)
-@@ -303,23 +426,86 @@ static struct fb_info * __init gxfb_init
- return info;
- }
-
--static int __init gxfb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
-+static int gxfb_console_notify(struct notifier_block *self,
-+ unsigned long action, void *data)
-+{
-+ if (gxfb_info != NULL) {
-+ struct geodefb_par *par = gxfb_info->par;
-+ par->fbactive = (action == CONSOLE_EVENT_SWITCH_TEXT) ? 0 : 1;
-+ }
-+
-+ return NOTIFY_OK;
-+}
-+
-+static struct notifier_block gxfb_console_notifier = {
-+ .notifier_call = gxfb_console_notify
-+};
-+
-+#ifdef CONFIG_PM
-+
-+static int gxfb_suspend(struct pci_dev *pdev, pm_message_t state)
-+{
-+ struct fb_info *info = pci_get_drvdata(pdev);
-+ struct geodefb_par *par = info->par;
-+
-+ if (pdev->dev.power.power_state.event == state.event)
-+ return 0;
-+
-+ if (state.event == PM_EVENT_SUSPEND) {
-+
-+ acquire_console_sem();
-+ gxfb_powerdown(info);
-+
-+ par->state = FB_POWER_STATE_OFF;
-+ fb_set_suspend(info, 1);
-+
-+ release_console_sem();
-+ }
-+
-+ pdev->dev.power.power_state = state;
-+ return 0;
-+}
-+
-+static int gxfb_resume(struct pci_dev *pdev)
-+{
-+ struct fb_info *info = pci_get_drvdata(pdev);
-+
-+ acquire_console_sem();
-+
-+ /* Turn the engine completely on */
-+
-+ if (gxfb_powerup(info))
-+ printk(KERN_ERR "gxfb: Powerup failed\n");
-+
-+ fb_set_suspend(info, 0);
-+ release_console_sem();
-+
-+ pdev->dev.power.power_state = PMSG_ON;
-+ return 0;
-+}
-+#endif
-+
-+static int __init gxfb_probe(struct pci_dev *pdev,
-+ const struct pci_device_id *id)
- {
- struct geodefb_par *par;
-- struct fb_info *info;
- int ret;
- unsigned long val;
-
-- info = gxfb_init_fbinfo(&pdev->dev);
-- if (!info)
-+ struct fb_videomode *modedb_ptr;
-+ int modedb_size;
-+
-+ gxfb_info = gxfb_init_fbinfo(&pdev->dev);
-+ if (gxfb_info == NULL)
- return -ENOMEM;
-- par = info->par;
-+
-+ par = gxfb_info->par;
-
- /* GX display controller and GX video device. */
- par->dc_ops = &gx_dc_ops;
- par->vid_ops = &gx_vid_ops;
-
-- if ((ret = gxfb_map_video_memory(info, pdev)) < 0) {
-+ if ((ret = gxfb_map_video_memory(gxfb_info, pdev)) < 0) {
- dev_err(&pdev->dev, "failed to map frame buffer or controller registers\n");
- goto err;
- }
-@@ -333,32 +519,60 @@ static int __init gxfb_probe(struct pci_
- else
- par->enable_crt = 1;
-
-- ret = fb_find_mode(&info->var, info, mode_option,
-- gx_modedb, ARRAY_SIZE(gx_modedb), NULL, 16);
-+ /* Get the current dotclock */
-+
-+ par->curdclk = (par->vid_ops->get_dclk) ? par->vid_ops->get_dclk(gxfb_info) : 0;
-+
-+ /* We need to determine a display mode right now, so we will
-+ * check to see if the DCON was previously detected by the BIOS
-+ * and use that to make our mode database decision.
-+ */
-+
-+ modedb_ptr = (struct fb_videomode *) gx_modedb;
-+ modedb_size = ARRAY_SIZE(gx_modedb);
-+
-+#ifdef CONFIG_OLPC
-+ if (olpc_has_dcon()) {
-+ modedb_ptr = (struct fb_videomode *) gx_dcon_modedb;
-+ modedb_size = ARRAY_SIZE(gx_dcon_modedb);
-+ }
-+#endif
-+
-+ ret = fb_find_mode(&gxfb_info->var, gxfb_info, mode_option,
-+ modedb_ptr, modedb_size, NULL, 16);
-+
- if (ret == 0 || ret == 4) {
- dev_err(&pdev->dev, "could not find valid video mode\n");
- ret = -EINVAL;
- goto err;
- }
-
-+ /* Clear the screen of garbage, unless noclear was specified,
-+ * in which case we assume the user knows what he is doing */
-+
-+ if (!noclear)
-+ memset_io(gxfb_info->screen_base, 0, gxfb_info->fix.smem_len);
-+
-+ gxfb_check_var(&gxfb_info->var, gxfb_info);
-+ gxfb_set_par(gxfb_info);
-+
-+ /* We are powered up */
-+ par->state = FB_POWER_STATE_ON;
-
-- /* Clear the frame buffer of garbage. */
-- memset_io(info->screen_base, 0, info->fix.smem_len);
-
-- gxfb_check_var(&info->var, info);
-- gxfb_set_par(info);
-+ console_event_register(&gxfb_console_notifier);
-
-- if (register_framebuffer(info) < 0) {
-+ if (register_framebuffer(gxfb_info) < 0) {
- ret = -EINVAL;
- goto err;
- }
-- pci_set_drvdata(pdev, info);
-- printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node, info->fix.id);
-+ pci_set_drvdata(pdev, gxfb_info);
-+ printk(KERN_INFO "fb%d: %s frame buffer device\n", gxfb_info->node, gxfb_info->fix.id);
- return 0;
-
- err:
-- if (info->screen_base) {
-- iounmap(info->screen_base);
-+ if (gxfb_info->screen_base) {
-+ iounmap(gxfb_info->screen_base);
- pci_release_region(pdev, 0);
- }
- if (par->vid_regs) {
-@@ -370,8 +584,9 @@ static int __init gxfb_probe(struct pci_
- pci_release_region(pdev, 2);
- }
-
-- if (info)
-- framebuffer_release(info);
-+ if (gxfb_info)
-+ framebuffer_release(gxfb_info);
-+
- return ret;
- }
-
-@@ -397,9 +612,7 @@ static void gxfb_remove(struct pci_dev *
- }
-
- static struct pci_device_id gxfb_id_table[] = {
-- { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_GX_VIDEO,
-- PCI_ANY_ID, PCI_ANY_ID, PCI_BASE_CLASS_DISPLAY << 16,
-- 0xff0000, 0 },
-+ { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_GX_VIDEO) },
- { 0, }
- };
-
-@@ -410,22 +623,30 @@ static struct pci_driver gxfb_driver = {
- .id_table = gxfb_id_table,
- .probe = gxfb_probe,
- .remove = gxfb_remove,
-+#ifdef CONFIG_PM
-+ .suspend = gxfb_suspend,
-+ .resume = gxfb_resume
-+#endif
- };
-
- #ifndef MODULE
--static int __init gxfb_setup(char *options)
--{
-+static int __init gxfb_setup(char *options) {
-
- char *opt;
-
- if (!options || !*options)
- return 0;
-
-- while ((opt = strsep(&options, ",")) != NULL) {
-+ while((opt = strsep(&options, ",")) != NULL) {
- if (!*opt)
- continue;
-
-- mode_option = opt;
-+ if (!strncmp(opt, "fbsize:", 7))
-+ fbsize = simple_strtoul(opt+7, NULL, 0);
-+ else if (!strcmp(opt, "noclear"))
-+ noclear = 1;
-+ else
-+ mode_option = opt;
- }
-
- return 0;
-@@ -444,7 +665,6 @@ static int __init gxfb_init(void)
- #endif
- return pci_register_driver(&gxfb_driver);
- }
--
- static void __exit gxfb_cleanup(void)
- {
- pci_unregister_driver(&gxfb_driver);
-@@ -456,5 +676,8 @@ module_exit(gxfb_cleanup);
- module_param(mode_option, charp, 0);
- MODULE_PARM_DESC(mode_option, "video mode (<x>x<y>[-<bpp>][@<refr>])");
-
-+module_param(fbsize, int, 0);
-+MODULE_PARM_DESC(fbsize, "video memory size");
-+
- MODULE_DESCRIPTION("Framebuffer driver for the AMD Geode GX");
- MODULE_LICENSE("GPL");
-Index: linux-2.6.23.17/drivers/video/geode/lxfb.h
-===================================================================
---- linux-2.6.23.17.orig/drivers/video/geode/lxfb.h
-+++ linux-2.6.23.17/drivers/video/geode/lxfb.h
-@@ -25,10 +25,23 @@ void lx_set_mode(struct fb_info *);
- void lx_get_gamma(struct fb_info *, unsigned int *, int);
- void lx_set_gamma(struct fb_info *, unsigned int *, int);
- unsigned int lx_framebuffer_size(void);
-+int lx_shutdown(struct fb_info *);
-+int lx_powerup(struct fb_info *);
- int lx_blank_display(struct fb_info *, int);
- void lx_set_palette_reg(struct fb_info *, unsigned int, unsigned int,
- unsigned int, unsigned int);
-
-+
-+
-+/* ioctl() defines */
-+
-+#define FBIOSGAMMA _IOW('F', 0x20, void *)
-+#define FBIOGGAMMA _IOW('F', 0x21, void *)
-+
-+/* General definitions */
-+#define LXFB_GAMMA_DWORDS 256 /* number of dwords in the gamma ram */
-+#define LXFB_GAMMA_SIZE (LXFB_GAMMA_DWORDS * sizeof(unsigned int))
-+
- /* MSRS */
-
- #define MSR_LX_GLD_CONFIG 0x48002001
-Index: linux-2.6.23.17/drivers/video/geode/lxfb_core.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/video/geode/lxfb_core.c
-+++ linux-2.6.23.17/drivers/video/geode/lxfb_core.c
-@@ -22,6 +22,7 @@
- #include <linux/init.h>
- #include <linux/pci.h>
- #include <linux/uaccess.h>
-+#include <asm/olpc.h>
-
- #include "lxfb.h"
-
-@@ -35,186 +36,84 @@ static int fbsize;
- */
-
- const struct fb_videomode geode_modedb[] __initdata = {
-- /* 640x480-60 */
-- { NULL, 60, 640, 480, 39682, 48, 8, 25, 2, 88, 2,
-+ /* 640x480-60 VESA */
-+ { NULL, 60, 640, 480, 39682, 48, 16, 33, 10, 96, 2,
-+ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-+ /* 640x480-75 VESA */
-+ { NULL, 75, 640, 480, 31746, 120, 16, 16, 01, 64, 3,
-+ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-+ /* 640x480-85 VESA */
-+ { NULL, 85, 640, 480, 27777, 80, 56, 25, 01, 56, 3,
-+ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-+ /* 800x600-60 VESA */
-+ { NULL, 60, 800, 600, 25000, 88, 40, 23, 01, 128, 4,
-+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-+ /* 800x600-75 VESA */
-+ { NULL, 75, 800, 600, 20202, 160, 16, 21, 01, 80, 3,
-+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-+ /* 800x600-85 VESA */
-+ { NULL, 85, 800, 600, 17761, 152, 32, 27, 01, 64, 3,
-+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-+ /* 1024x768-60 VESA */
-+ { NULL, 60, 1024, 768, 15384, 160, 24, 29, 3, 136, 6,
-+ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-+ /* 1024x768-75 VESA */
-+ { NULL, 75, 1024, 768, 12690, 176, 16, 28, 1, 96, 3,
-+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-+ /* 1024x768-85 VESA */
-+ { NULL, 85, 1024, 768, 10582, 208, 48, 36, 1, 96, 3,
-+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-+ /* 1280x960-60 VESA */
-+ { NULL, 60, 1280, 960, 9259, 312, 96, 36, 1, 112, 3,
-+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-+ /* 1280x960-85 VESA */
-+ { NULL, 85, 1280, 960, 6734, 224, 64, 47, 1, 160, 3,
-+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-+ /* 1280x1024-60 VESA */
-+ { NULL, 60, 1280, 1024, 9259, 248, 48, 38, 1, 112, 3,
-+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-+ /* 1280x1024-75 VESA */
-+ { NULL, 75, 1280, 1024, 7407, 248, 16, 38, 1, 144, 3,
-+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-+ /* 1280x1024-85 VESA */
-+ { NULL, 85, 1280, 1024, 6349, 224, 64, 44, 1, 160, 3,
- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-- FB_VMODE_NONINTERLACED, 0 },
-- /* 640x400-70 */
-- { NULL, 70, 640, 400, 39770, 40, 8, 28, 5, 96, 2,
-- FB_SYNC_HOR_HIGH_ACT,
-- FB_VMODE_NONINTERLACED, 0 },
-- /* 640x480-70 */
-- { NULL, 70, 640, 480, 35014, 88, 24, 15, 2, 64, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 640x480-72 */
-- { NULL, 72, 640, 480, 32102, 120, 16, 20, 1, 40, 3,
-- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-- FB_VMODE_NONINTERLACED, 0 },
-- /* 640x480-75 */
-- { NULL, 75, 640, 480, 31746, 120, 16, 16, 1, 64, 3,
-- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-- FB_VMODE_NONINTERLACED, 0 },
-- /* 640x480-85 */
-- { NULL, 85, 640, 480, 27780, 80, 56, 25, 1, 56, 3,
-- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-- FB_VMODE_NONINTERLACED, 0 },
-- /* 640x480-90 */
-- { NULL, 90, 640, 480, 26392, 96, 32, 22, 1, 64, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 640x480-100 */
-- { NULL, 100, 640, 480, 23167, 104, 40, 25, 1, 64, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 640x480-60 */
-- { NULL, 60, 640, 480, 39682, 48, 16, 25, 10, 88, 2,
-- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-- FB_VMODE_NONINTERLACED, 0 },
-- /* 800x600-56 */
-- { NULL, 56, 800, 600, 27901, 128, 24, 22, 1, 72, 2,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 800x600-60 */
-- { NULL, 60, 800, 600, 25131, 72, 32, 23, 1, 136, 4,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 800x600-70 */
-- { NULL, 70, 800, 600, 21873, 120, 40, 21, 4, 80, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 800x600-72 */
-- { NULL, 72, 800, 600, 20052, 64, 56, 23, 37, 120, 6,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 800x600-75 */
-- { NULL, 75, 800, 600, 20202, 160, 16, 21, 1, 80, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 800x600-85 */
-- { NULL, 85, 800, 600, 17790, 152, 32, 27, 1, 64, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 800x600-90 */
-- { NULL, 90, 800, 600, 16648, 128, 40, 28, 1, 88, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 800x600-100 */
-- { NULL, 100, 800, 600, 14667, 136, 48, 27, 1, 88, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 800x600-60 */
-- { NULL, 60, 800, 600, 25131, 88, 40, 23, 1, 128, 4,
-- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-- FB_VMODE_NONINTERLACED, 0 },
-- /* 1024x768-60 */
-- { NULL, 60, 1024, 768, 15385, 160, 24, 29, 3, 136, 6,
-- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-- FB_VMODE_NONINTERLACED, 0 },
-- /* 1024x768-70 */
-- { NULL, 70, 1024, 768, 13346, 144, 24, 29, 3, 136, 6,
-- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-- FB_VMODE_NONINTERLACED, 0 },
-- /* 1024x768-72 */
-- { NULL, 72, 1024, 768, 12702, 168, 56, 29, 4, 112, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1024x768-75 */
-- { NULL, 75, 1024, 768, 12703, 176, 16, 28, 1, 96, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1024x768-85 */
-- { NULL, 85, 1024, 768, 10581, 208, 48, 36, 1, 96, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1024x768-90 */
-- { NULL, 90, 1024, 768, 9981, 176, 64, 37, 1, 112, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1024x768-100 */
-- { NULL, 100, 1024, 768, 8825, 184, 72, 42, 1, 112, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1024x768-60 */
-- { NULL, 60, 1024, 768, 15385, 160, 24, 29, 3, 136, 6,
-- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-- FB_VMODE_NONINTERLACED, 0 },
-- /* 1152x864-60 */
-- { NULL, 60, 1152, 864, 12251, 184, 64, 27, 1, 120, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1152x864-70 */
-- { NULL, 70, 1152, 864, 10254, 192, 72, 32, 8, 120, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1152x864-72 */
-- { NULL, 72, 1152, 864, 9866, 200, 72, 33, 7, 128, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1152x864-75 */
-- { NULL, 75, 1152, 864, 9259, 256, 64, 32, 1, 128, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1152x864-85 */
-- { NULL, 85, 1152, 864, 8357, 200, 72, 37, 3, 128, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1152x864-90 */
-- { NULL, 90, 1152, 864, 7719, 208, 80, 42, 9, 128, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1152x864-100 */
-- { NULL, 100, 1152, 864, 6947, 208, 80, 48, 3, 128, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1152x864-60 */
-- { NULL, 60, 1152, 864, 12251, 184, 64, 27, 1, 120, 3,
-- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-- FB_VMODE_NONINTERLACED, 0 },
-- /* 1280x1024-60 */
-- { NULL, 60, 1280, 1024, 9262, 248, 48, 38, 1, 112, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1280x1024-70 */
-- { NULL, 70, 1280, 1024, 7719, 224, 88, 38, 6, 136, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1280x1024-72 */
-- { NULL, 72, 1280, 1024, 7490, 224, 88, 39, 7, 136, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1280x1024-75 */
-- { NULL, 75, 1280, 1024, 7409, 248, 16, 38, 1, 144, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1280x1024-85 */
-- { NULL, 85, 1280, 1024, 6351, 224, 64, 44, 1, 160, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1280x1024-90 */
-- { NULL, 90, 1280, 1024, 5791, 240, 96, 51, 12, 144, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1280x1024-100 */
-- { NULL, 100, 1280, 1024, 5212, 240, 96, 57, 6, 144, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1280x1024-60 */
-- { NULL, 60, 1280, 1024, 9262, 248, 48, 38, 1, 112, 3,
-- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-- FB_VMODE_NONINTERLACED, 0 },
-- /* 1600x1200-60 */
-+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-+ /* 1600x1200-60 VESA */
- { NULL, 60, 1600, 1200, 6172, 304, 64, 46, 1, 192, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1600x1200-70 */
-- { NULL, 70, 1600, 1200, 5291, 304, 64, 46, 1, 192, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1600x1200-72 */
-- { NULL, 72, 1600, 1200, 5053, 288, 112, 47, 13, 176, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1600x1200-75 */
-+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-+ /* 1600x1200-75 VESA */
- { NULL, 75, 1600, 1200, 4938, 304, 64, 46, 1, 192, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1600x1200-85 */
-+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-+ /* 1600x1200-85 VESA */
- { NULL, 85, 1600, 1200, 4357, 304, 64, 46, 1, 192, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1600x1200-90 */
-- { NULL, 90, 1600, 1200, 3981, 304, 128, 60, 1, 176, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1600x1200-100 */
-- { NULL, 100, 1600, 1200, 3563, 304, 128, 67, 1, 176, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1600x1200-60 */
-- { NULL, 60, 1600, 1200, 6172, 304, 64, 46, 1, 192, 3,
- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-- FB_VMODE_NONINTERLACED, 0 },
-- /* 1920x1440-60 */
-- { NULL, 60, 1920, 1440, 4273, 344, 128, 56, 1, 208, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1920x1440-70 */
-- { NULL, 70, 1920, 1440, 3593, 360, 152, 55, 8, 208, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1920x1440-72 */
-- { NULL, 72, 1920, 1440, 3472, 360, 152, 68, 4, 208, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1920x1440-75 */
-- { NULL, 75, 1920, 1440, 3367, 352, 144, 56, 1, 224, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-- /* 1920x1440-85 */
-- { NULL, 85, 1920, 1440, 2929, 368, 152, 68, 1, 216, 3,
-- 0, FB_VMODE_NONINTERLACED, 0 },
-+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
-+ /* 1200x900-75 - CRT timings for the OLPC mode */
-+ { NULL, 75, 1200, 900, 8049, 104, 240, 29, 54, 136, 3,
-+ 0, FB_VMODE_NONINTERLACED, 0 }
- };
-
-+#ifdef CONFIG_OLPC
-+const struct fb_videomode olpc_dcon_modedb[] __initdata = {
-+ /* The only mode the DCON has is 1200x900 */
-+ { NULL, 50, 1200, 900, 17460, 24, 8, 4, 5, 8, 3,
-+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-+ FB_VMODE_NONINTERLACED, 0 }
-+};
-+#endif
-+
- static int lxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
- {
- if (var->xres > 1920 || var->yres > 1440)
-@@ -379,16 +278,55 @@ static int __init lxfb_map_video_memory(
- return 0;
- }
-
-+static int lxfb_set_gamma(struct fb_info *info, void * __user data)
-+{
-+ unsigned int gamma[LXFB_GAMMA_DWORDS];
-+
-+ if (copy_from_user(gamma, data, LXFB_GAMMA_SIZE))
-+ return -EFAULT;
-+
-+ lx_set_gamma(info, gamma, LXFB_GAMMA_SIZE);
-+ return 0;
-+}
-+
-+static int lxfb_get_gamma(struct fb_info *info, void * __user data)
-+{
-+ unsigned int gamma[LXFB_GAMMA_DWORDS];
-+ memset(gamma, 0, sizeof(gamma));
-+
-+ lx_get_gamma(info, gamma, LXFB_GAMMA_DWORDS);
-+
-+ return copy_to_user(data, gamma, LXFB_GAMMA_SIZE) ?
-+ -EFAULT : 0;
-+}
-+
-+static int lxfb_ioctl( struct fb_info *info, unsigned int cmd,
-+ unsigned long arg)
-+{
-+ switch(cmd) {
-+ case FBIOSGAMMA:
-+ return lxfb_set_gamma(info, (void * __user) arg);
-+
-+ case FBIOGGAMMA:
-+ return lxfb_get_gamma(info, (void * __user) arg);
-+ }
-+
-+ return -ENOTTY;
-+}
-+
- static struct fb_ops lxfb_ops = {
- .owner = THIS_MODULE,
- .fb_check_var = lxfb_check_var,
- .fb_set_par = lxfb_set_par,
- .fb_setcolreg = lxfb_setcolreg,
- .fb_blank = lxfb_blank,
-+ .fb_ioctl = lxfb_ioctl,
- /* No HW acceleration for now. */
- .fb_fillrect = cfb_fillrect,
- .fb_copyarea = cfb_copyarea,
- .fb_imageblit = cfb_imageblit,
-+ .fb_powerdown = lx_shutdown,
-+ .fb_powerup = lx_powerup,
- };
-
- static struct fb_info * __init lxfb_init_fbinfo(struct device *dev)
-@@ -431,6 +369,45 @@ static struct fb_info * __init lxfb_init
- return info;
- }
-
-+#ifdef CONFIG_PM
-+
-+static int lxfb_suspend(struct pci_dev *pdev, pm_message_t state)
-+{
-+ struct fb_info *info = pci_get_drvdata(pdev);
-+
-+ if (pdev->dev.power.power_state.event == state.event)
-+ return 0;
-+
-+ if (state.event == PM_EVENT_SUSPEND) {
-+
-+ acquire_console_sem();
-+ lx_shutdown(info);
-+ fb_set_suspend(info, 1);
-+ release_console_sem();
-+ }
-+
-+ pdev->dev.power.power_state = state;
-+ return 0;
-+}
-+
-+static int lxfb_resume(struct pci_dev *pdev)
-+{
-+ struct fb_info *info = pci_get_drvdata(pdev);
-+
-+ acquire_console_sem();
-+
-+ /* Turn the engine completely on */
-+
-+ lx_powerup(info);
-+ fb_set_suspend(info, 0);
-+ release_console_sem();
-+
-+ pdev->dev.power.power_state = PMSG_ON;
-+ return 0;
-+}
-+
-+#endif
-+
- static int __init lxfb_probe(struct pci_dev *pdev,
- const struct pci_device_id *id)
- {
-@@ -467,6 +444,13 @@ static int __init lxfb_probe(struct pci_
- modedb_ptr = (struct fb_videomode *) geode_modedb;
- modedb_size = ARRAY_SIZE(geode_modedb);
-
-+#ifdef CONFIG_OLPC
-+ if (olpc_has_dcon()) {
-+ modedb_ptr = (struct fb_videomode *) olpc_dcon_modedb;
-+ modedb_size = ARRAY_SIZE(olpc_dcon_modedb);
-+ }
-+#endif
-+
- ret = fb_find_mode(&info->var, info, mode_option,
- modedb_ptr, modedb_size, NULL, 16);
-
-@@ -556,6 +540,10 @@ static struct pci_driver lxfb_driver = {
- .id_table = lxfb_id_table,
- .probe = lxfb_probe,
- .remove = lxfb_remove,
-+#ifdef CONFIG_PM
-+ .suspend = lxfb_suspend,
-+ .resume = lxfb_resume
-+#endif
- };
-
- #ifndef MODULE
-Index: linux-2.6.23.17/drivers/video/geode/lxfb_ops.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/video/geode/lxfb_ops.c
-+++ linux-2.6.23.17/drivers/video/geode/lxfb_ops.c
-@@ -13,9 +13,13 @@
- #include <linux/fb.h>
- #include <linux/uaccess.h>
- #include <linux/delay.h>
-+#include <asm/olpc.h>
-
- #include "lxfb.h"
-
-+#define _GEODELX_
-+#include "geode_regs.h"
-+
- /* TODO
- * Support panel scaling
- * Add acceleration
-@@ -290,6 +294,19 @@ unsigned int lx_framebuffer_size(void)
- {
- unsigned int val;
-
-+#ifdef CONFIG_OLPC
-+ if (machine_is_olpc() && !olpc_has_vsa()) {
-+ u32 hi,lo;
-+ rdmsr(MSR_LX_GLIU0_P2D_RO0, lo, hi);
-+
-+ /* Top page number */
-+ val = ((hi & 0xff) << 12) | ((lo & 0xfff00000) >> 20);
-+ val -= (lo & 0x000fffff); /* Subtract bottom page number */
-+ val += 1; /* Adjust page count */
-+ return (val << 12);
-+ }
-+#endif
-+
- /* The frame buffer size is reported by a VSM in VSA II */
- /* Virtual Register Class = 0x02 */
- /* VG_MEM_SIZE (1MB units) = 0x00 */
-@@ -301,6 +318,34 @@ unsigned int lx_framebuffer_size(void)
- return (val << 20);
- }
-
-+void lx_set_gamma(struct fb_info *info, unsigned int *gamma, int len)
-+{
-+ int i;
-+ struct lxfb_par *par = info->par;
-+
-+ writel(0, par->df_regs + DF_PAR);
-+
-+ /* Sequential writes to the data register will increment the
-+ address automatically */
-+
-+ for(i = 0; i < len; i++)
-+ writel(gamma[i] & 0xFFFFFF, par->df_regs + DF_PDR);
-+
-+ writel(readl(par->df_regs + DF_MISC) & ~DF_MISC_GAM_BYPASS,
-+ par->df_regs + DF_MISC);
-+}
-+
-+void lx_get_gamma(struct fb_info *info, unsigned int *gamma, int len)
-+{
-+ int i;
-+ struct lxfb_par *par = info->par;
-+
-+ writel(0, par->df_regs + DF_PAR);
-+
-+ for(i = 0; i < len;i++)
-+ gamma[i] = readl(par->df_regs + DF_PDR);
-+}
-+
- void lx_set_mode(struct fb_info *info)
- {
- struct lxfb_par *par = info->par;
-@@ -313,6 +358,7 @@ void lx_set_mode(struct fb_info *info)
- int vactive, vblankstart, vsyncstart, vsyncend, vblankend, vtotal;
-
- /* Unlock the DC registers */
-+ readl(par->dc_regs + DC_UNLOCK);
- writel(DC_UNLOCK_CODE, par->dc_regs + DC_UNLOCK);
-
- lx_graphics_disable(info);
-@@ -534,3 +580,285 @@ int lx_blank_display(struct fb_info *inf
-
- return 0;
- }
-+
-+static struct geoderegs saved_regs;
-+
-+static void lx_save_regs(struct fb_info *info, struct geoderegs *regs)
-+{
-+ struct lxfb_par *par = info->par;
-+ int i;
-+
-+ /* Wait for the command buffer to empty */
-+ while(!(readl(par->gp_regs + 0x44) & (1 << 4)));
-+
-+ rdmsrl(MSR_LX_DF_PADSEL, regs->msr.padsel);
-+ rdmsrl(MSR_LX_GLCP_DOTPLL, regs->msr.dotpll);
-+ rdmsrl(MSR_LX_DF_GLCONFIG, regs->msr.dfglcfg);
-+ rdmsrl(MSR_LX_DC_SPARE, regs->msr.dcspare);
-+
-+ writel(0x4758, par->dc_regs + 0x00);
-+
-+ memcpy(regs->gp.b, par->gp_regs, GP_REG_SIZE);
-+ memcpy(regs->dc.b, par->dc_regs, DC_REG_SIZE);
-+ memcpy(regs->vp.b, par->df_regs, VP_REG_SIZE);
-+ memcpy(regs->fp.b, par->df_regs + VP_FP_START, FP_REG_SIZE);
-+
-+ /* Save the palettes */
-+ writel(0, par->dc_regs + 0x70);
-+
-+ for(i = 0; i < DC_PAL_SIZE; i++)
-+ regs->pal[i] = readl(par->dc_regs + 0x74);
-+
-+ writel(0, par->df_regs + 0x38);
-+
-+ for(i = 0; i <= 0xFF; i++)
-+ regs->gamma[i] = readl(par->df_regs + 0x40);
-+}
-+
-+static void lx_restore_regs(struct fb_info *info, struct geoderegs *regs)
-+{
-+ struct lxfb_par *par = info->par;
-+ u32 val, i;
-+
-+ /* == DOTPLL == */
-+
-+ lx_set_dotpll((u32) (regs->msr.dotpll >> 32));
-+
-+ /* MSRs */
-+
-+ wrmsrl(MSR_LX_DF_GLCONFIG, regs->msr.dfglcfg);
-+
-+ /* == GP == */
-+
-+ writel(regs->gp.r.dst_offset, par->gp_regs + 0x00);
-+ writel(regs->gp.r.src_offset, par->gp_regs + 0x04);
-+ writel(regs->gp.r.stride, par->gp_regs + 0x08);
-+ writel(regs->gp.r.wid_height, par->gp_regs + 0x0C);
-+ writel(regs->gp.r.src_color_fg, par->gp_regs + 0x10);
-+ writel(regs->gp.r.src_color_bg, par->gp_regs + 0x14);
-+ writel(regs->gp.r.pat_color_0, par->gp_regs + 0x18);
-+ writel(regs->gp.r.pat_color_1, par->gp_regs + 0x1C);
-+ writel(regs->gp.r.pat_color_2, par->gp_regs + 0x20);
-+ writel(regs->gp.r.pat_color_3, par->gp_regs + 0x24);
-+ writel(regs->gp.r.pat_color_4, par->gp_regs + 0x28);
-+ writel(regs->gp.r.pat_color_5, par->gp_regs + 0x2C);
-+ writel(regs->gp.r.pat_data_0, par->gp_regs + 0x30);
-+ writel(regs->gp.r.pat_data_1, par->gp_regs + 0x34);
-+
-+ /* Writing to these registers would cause a blt to happen */
-+ /* 0x38, 0x3c, 0x40 */
-+
-+ /* Status register (0x44) is read only */
-+
-+ writel(regs->gp.r.hst_src, par->gp_regs + 0x48);
-+ writel(regs->gp.r.base_offset, par->gp_regs + 0x4c);
-+ writel(regs->gp.r.cmd_top, par->gp_regs + 0x50);
-+ writel(regs->gp.r.cmd_bot, par->gp_regs + 0x54);
-+ writel(regs->gp.r.cmd_read, par->gp_regs + 0x58);
-+ writel(regs->gp.r.cmd_write, par->gp_regs + 0x5C);
-+ writel(regs->gp.r.ch3_offset, par->gp_regs + 0x60);
-+ writel(regs->gp.r.ch3_mode_str, par->gp_regs + 0x64);
-+ writel(regs->gp.r.ch3_width, par->gp_regs + 0x6C);
-+ writel(regs->gp.r.ch3_hsrc, par->gp_regs + 0x70);
-+
-+ /* FIXME: Restore the LUT data here */
-+
-+ writel(regs->gp.r.int_cntrl, par->gp_regs + 0x70);
-+
-+ /* == DC == */
-+
-+ /* Write the unlock value */
-+ writel(0x4758, par->dc_regs + 0x00);
-+
-+ /* Write the palette data first */
-+
-+ writel(0, par->dc_regs + 0x70);
-+
-+ for(i = 0; i < DC_PAL_SIZE; i++)
-+ writel(regs->pal[i], par->dc_regs + 0x74);
-+
-+ /* MSRs */
-+ wrmsrl(MSR_LX_DC_SPARE, regs->msr.dcspare);
-+
-+ /* Write the gcfg register without the enables */
-+ writel(regs->dc.r.gcfg & ~0x0F, par->dc_regs + 0x04);
-+
-+ /* Write the vcfg register without the enables */
-+ writel(regs->dc.r.dcfg & ~0x19, par->dc_regs + 0x08);
-+
-+ /* Write the rest of the active registers */
-+ writel(regs->dc.r.arb, par->dc_regs + 0x0C);
-+ writel(regs->dc.r.fb_st_offset, par->dc_regs + 0x10);
-+ writel(regs->dc.r.cb_st_offset, par->dc_regs + 0x14);
-+ writel(regs->dc.r.curs_st_offset, par->dc_regs + 0x18);
-+ writel(regs->dc.r.icon_st_offset, par->dc_regs + 0x1C);
-+ writel(regs->dc.r.vid_y_st_offset, par->dc_regs + 0x20);
-+ writel(regs->dc.r.vid_u_st_offset, par->dc_regs + 0x24);
-+ writel(regs->dc.r.vid_v_st_offset, par->dc_regs + 0x28);
-+ writel(regs->dc.r.dctop, par->dc_regs + 0x2c);
-+ writel(regs->dc.r.line_size, par->dc_regs + 0x30);
-+ writel(regs->dc.r.gfx_pitch, par->dc_regs + 0x34);
-+ writel(regs->dc.r.vid_yuv_pitch, par->dc_regs + 0x38);
-+ writel(regs->dc.r.h_active_timing, par->dc_regs + 0x40);
-+ writel(regs->dc.r.h_blank_timing, par->dc_regs + 0x44);
-+ writel(regs->dc.r.h_sync_timing, par->dc_regs + 0x48);
-+ writel(regs->dc.r.v_active_timing, par->dc_regs + 0x50);
-+ writel(regs->dc.r.v_blank_timing, par->dc_regs + 0x54);
-+ writel(regs->dc.r.v_sync_timing, par->dc_regs + 0x58);
-+ writel(regs->dc.r.fbactive, par->dc_regs + 0x5c);
-+ writel(regs->dc.r.dc_cursor_x, par->dc_regs + 0x60);
-+ writel(regs->dc.r.dc_cursor_y, par->dc_regs + 0x64);
-+ writel(regs->dc.r.dc_icon_x, par->dc_regs + 0x68);
-+
-+ /* Skip register 0x6C (line_cnt), 0x70/0x74 (palette),
-+ 0x78 (diagnostic), and 0x7c (diagnostic)
-+ */
-+
-+ writel(regs->dc.r.dc_vid_ds_delta, par->dc_regs + 0x80);
-+ writel(regs->dc.r.gliu0_mem_offset, par->dc_regs + 0x84);
-+ writel(regs->dc.r.dv_ctl, par->dc_regs + 0x88);
-+ writel(regs->dc.r.dv_acc, par->dc_regs + 0x8C);
-+
-+ writel(regs->dc.r.gfx_scale, par->dc_regs + 0x90);
-+ writel(regs->dc.r.irq_filt_ctl, par->dc_regs + 0x94);
-+ writel(regs->dc.r.filt_coeff1, par->dc_regs + 0x98);
-+ writel(regs->dc.r.filt_coeff2, par->dc_regs + 0x9C);
-+ writel(regs->dc.r.vbi_event_ctl, par->dc_regs + 0xA0);
-+
-+ writel(regs->dc.r.vbi_odd_ctl, par->dc_regs + 0xA4);
-+ writel(regs->dc.r.vbi_hor, par->dc_regs + 0xA8);
-+ writel(regs->dc.r.vbi_ln_odd, par->dc_regs + 0xAC);
-+ writel(regs->dc.r.vbi_ln_event, par->dc_regs + 0xB0);
-+ writel(regs->dc.r.vbi_pitch, par->dc_regs + 0xB4);
-+ writel(regs->dc.r.clr_key, par->dc_regs + 0xB8);
-+ writel(regs->dc.r.clr_key_mask, par->dc_regs + 0xBC);
-+
-+ writel(regs->dc.r.clr_key_x, par->dc_regs + 0xC0);
-+ writel(regs->dc.r.clr_key_y, par->dc_regs + 0xC4);
-+ writel(regs->dc.r.irq, par->dc_regs + 0xC8);
-+ writel(regs->dc.r.genlk_ctrl, par->dc_regs + 0xD4);
-+
-+ writel(regs->dc.r.vid_even_y_st_offset, par->dc_regs + 0xD8);
-+ writel(regs->dc.r.vid_even_u_st_offset, par->dc_regs + 0xDC);
-+ writel(regs->dc.r.vid_even_v_st_offset, par->dc_regs + 0xE0);
-+
-+ writel(regs->dc.r.v_active_even_timing, par->dc_regs + 0xE4);
-+ writel(regs->dc.r.v_blank_even_timing, par->dc_regs + 0xE8);
-+ writel(regs->dc.r.v_sync_even_timing, par->dc_regs + 0xEC);
-+
-+ /* == VP == */
-+
-+ /* MSR */
-+ wrmsrl(MSR_LX_DF_PADSEL, regs->msr.padsel);
-+
-+ /* Write gamma information first */
-+
-+ writel(0, par->df_regs + 0x38);
-+
-+ for(i = 0; i <= 0xFF; i++)
-+ writel((u32) regs->gamma[i], par->df_regs + 0x40);
-+
-+ /* Don't enable video yet */
-+ writel((u32) regs->vp.r.vcfg & ~0x01, par->df_regs + 0x00);
-+
-+ /* Don't enable the CRT yet */
-+ writel((u32) regs->vp.r.dcfg & ~0x0F, par->df_regs + 0x08);
-+
-+ /* Write the rest of the VP registers */
-+
-+ writel((u32) regs->vp.r.vx, par->df_regs + 0x10);
-+ writel((u32) regs->vp.r.vy, par->df_regs + 0x18);
-+ writel((u32) regs->vp.r.vs, par->df_regs + 0x20);
-+ writel((u32) regs->vp.r.vck, par->df_regs + 0x28);
-+ writel((u32) regs->vp.r.vcm, par->df_regs + 0x30);
-+ writel((u32) regs->vp.r.misc, par->df_regs + 0x50);
-+ writel((u32) regs->vp.r.ccs, par->df_regs + 0x58);
-+ writel((u32) regs->vp.r.vdc, par->df_regs + 0x78);
-+ writel((u32) regs->vp.r.vco, par->df_regs + 0x80);
-+ writel((u32) regs->vp.r.crc, par->df_regs + 0x88);
-+ writel((u32) regs->vp.r.vde, par->df_regs + 0x98);
-+ writel((u32) regs->vp.r.cck, par->df_regs + 0xA0);
-+ writel((u32) regs->vp.r.ccm, par->df_regs + 0xA8);
-+ writel((u32) regs->vp.r.cc1, par->df_regs + 0xB0);
-+ writel((u32) regs->vp.r.cc2, par->df_regs + 0xB8);
-+ writel((u32) regs->vp.r.a1x, par->df_regs + 0xC0);
-+ writel((u32) regs->vp.r.a1y, par->df_regs + 0xC8);
-+ writel((u32) regs->vp.r.a1c, par->df_regs + 0xD0);
-+ writel((u32) regs->vp.r.a1t, par->df_regs + 0xD8);
-+ writel((u32) regs->vp.r.a2x, par->df_regs + 0xE0);
-+ writel((u32) regs->vp.r.a2y, par->df_regs + 0xE8);
-+ writel((u32) regs->vp.r.a2c, par->df_regs + 0xF0);
-+ writel((u32) regs->vp.r.a2t, par->df_regs + 0xF8);
-+ writel((u32) regs->vp.r.a3x, par->df_regs + 0x100);
-+ writel((u32) regs->vp.r.a3y, par->df_regs + 0x108);
-+ writel((u32) regs->vp.r.a3c, par->df_regs + 0x110);
-+ writel((u32) regs->vp.r.a3t, par->df_regs + 0x118);
-+ writel((u32) regs->vp.r.vrr, par->df_regs + 0x120);
-+
-+ writel((u32) regs->vp.r.vye, par->df_regs + 0x138);
-+ writel((u32) regs->vp.r.a1ye, par->df_regs + 0x140);
-+ writel((u32) regs->vp.r.a2ye, par->df_regs + 0x148);
-+ writel((u32) regs->vp.r.a3ye, par->df_regs + 0x150);
-+
-+ /* == FP == */
-+
-+ writel((u32) regs->fp.r.pt1, par->df_regs + 0x400);
-+ writel((u32) regs->fp.r.pt2, par->df_regs + 0x408);
-+ writel((u32) regs->fp.r.dfc, par->df_regs + 0x418);
-+ writel(regs->fp.r.dca, par->df_regs + 0x448);
-+ writel(regs->fp.r.dmd, par->df_regs + 0x450);
-+ writel(regs->fp.r.crc, par->df_regs + 0x458);
-+
-+ /* Final enables */
-+
-+ val = readl(par->df_regs + 0x410);
-+
-+ /* Control the panel */
-+ if (regs->fp.r.pm & (1 << 24)) {
-+
-+ if (!(val & 0x09))
-+ writel(regs->fp.r.pm, par->df_regs + 0x410);
-+ }
-+ else {
-+ if (!(val & 0x05))
-+ writel(regs->fp.r.pm, par->df_regs + 0x410);
-+ }
-+
-+ /* Turn everything on */
-+
-+ writel(regs->dc.r.gcfg, par->dc_regs + 0x04);
-+ writel((u32) regs->vp.r.vcfg, par->df_regs + 0x00);
-+ writel((u32) regs->vp.r.dcfg, par->df_regs + 0x08);
-+ writel(regs->dc.r.dcfg, par->dc_regs + 0x08);
-+}
-+
-+static int lx_power_on = 1;
-+
-+int lx_shutdown(struct fb_info *info)
-+{
-+ struct lxfb_par *par = info->par;
-+
-+ if (lx_power_on == 0)
-+ return 0;
-+
-+ writel(DC_UNLOCK_CODE, par->dc_regs + DC_UNLOCK);
-+ lx_save_regs(info, &saved_regs);
-+ lx_graphics_disable(info);
-+
-+ lx_power_on = 0;
-+ return 0;
-+}
-+
-+int lx_powerup(struct fb_info *info)
-+{
-+ struct lxfb_par *par = info->par;
-+
-+ if (lx_power_on == 1)
-+ return 0;
-+
-+ lx_restore_regs(info, &saved_regs);
-+ writel(0, par->dc_regs + DC_UNLOCK);
-+
-+ lx_power_on = 1;
-+ return 0;
-+}
-Index: linux-2.6.23.17/drivers/video/geode/video_gx.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/video/geode/video_gx.c
-+++ linux-2.6.23.17/drivers/video/geode/video_gx.c
-@@ -16,10 +16,14 @@
- #include <asm/io.h>
- #include <asm/delay.h>
- #include <asm/msr.h>
-+#include <asm/olpc.h>
-
- #include "geodefb.h"
- #include "video_gx.h"
-+#include "display_gx.h"
-
-+/* This structure is used to store the saved registers during suspend */
-+static struct geoderegs gx_saved_regs;
-
- /*
- * Tables of register settings for various DOTCLKs.
-@@ -58,7 +62,7 @@ static const struct gx_pll_entry gx_pll_
- { 13888, POSTDIV3, 0x000007E1 }, /* 72.0000 */
- { 13426, PREMULT2, 0x00000F4A }, /* 74.4810 */
- { 13333, 0, 0x00000052 }, /* 75.0000 */
-- { 12698, 0, 0x00000056 }, /* 78.7500 */
-+ { 12698, 0, 0x00000056 }, /* 78.7500 */
- { 12500, POSTDIV3|PREMULT2, 0x00000709 }, /* 80.0000 */
- { 11135, PREMULT2, 0x00000262 }, /* 89.8000 */
- { 10582, 0, 0x000002D2 }, /* 94.5000 */
-@@ -117,8 +121,9 @@ static const struct gx_pll_entry gx_pll_
- { 4357, 0, 0x0000057D }, /* 229.5000 */
- };
-
--static void gx_set_dclk_frequency(struct fb_info *info)
-+void gx_set_dclk_frequency(struct fb_info *info)
- {
-+ struct geodefb_par *par = info->par;
- const struct gx_pll_entry *pll_table;
- int pll_table_len;
- int i, best_i;
-@@ -173,115 +178,169 @@ static void gx_set_dclk_frequency(struct
- do {
- rdmsrl(MSR_GLCP_DOTPLL, dotpll);
- } while (timeout-- && !(dotpll & MSR_GLCP_DOTPLL_LOCK));
-+
-+ par->curdclk = pll_table[best_i].dotpll_value;
- }
-
--static void
--gx_configure_tft(struct fb_info *info)
-+/* Find out the current clock - we will use this information to avoid
-+ re-programming it if we don't need to */
-+
-+unsigned int gx_get_dclk(struct fb_info *info)
- {
-- struct geodefb_par *par = info->par;
-- unsigned long val;
-- unsigned long fp;
-+ const struct gx_pll_entry *pll_table;
-+ int pll_table_len;
-+ u64 dotpll;
-+ int i;
-
-- /* Set up the DF pad select MSR */
-+ if (cpu_data->x86_mask == 1) {
-+ pll_table = gx_pll_table_14MHz;
-+ pll_table_len = ARRAY_SIZE(gx_pll_table_14MHz);
-+ } else {
-+ pll_table = gx_pll_table_48MHz;
-+ pll_table_len = ARRAY_SIZE(gx_pll_table_48MHz);
-+ }
-
-- rdmsrl(GX_VP_MSR_PAD_SELECT, val);
-- val &= ~GX_VP_PAD_SELECT_MASK;
-- val |= GX_VP_PAD_SELECT_TFT;
-- wrmsrl(GX_VP_MSR_PAD_SELECT, val);
-+ rdmsrl(MSR_GLCP_DOTPLL, dotpll);
-
-- /* Turn off the panel */
-+ for(i = 0; i < pll_table_len; i++) {
-+ if (pll_table[i].dotpll_value == (u32) (dotpll >> 32))
-+ break;
-+ }
-+
-+ return (i == pll_table_len) ? 0 : pll_table[i].pixclock;
-+}
-
-- fp = readl(par->vid_regs + GX_FP_PM);
-- fp &= ~GX_FP_PM_P;
-- writel(fp, par->vid_regs + GX_FP_PM);
-
-- /* Set timing 1 */
-+#define CMP(val, mask, res) (((val) & (mask)) == (res))
-
-- fp = readl(par->vid_regs + GX_FP_PT1);
-- fp &= GX_FP_PT1_VSIZE_MASK;
-- fp |= info->var.yres << GX_FP_PT1_VSIZE_SHIFT;
-- writel(fp, par->vid_regs + GX_FP_PT1);
-+static void
-+gx_configure_tft(struct fb_info *info) {
-
-- /* Timing 2 */
-- /* Set bits that are always on for TFT */
-+ struct geodefb_par *par = info->par;
-+ u32 val, fp = 0, fp1, fp2, sync = 0;
-
-- fp = 0x0F100000;
-+ /* Set up the DF pad select MSR */
-
-- /* Add sync polarity */
-+ rdmsrl(GX_VP_MSR_PAD_SELECT, val);
-+
-+ if ((val & GX_VP_PAD_SELECT_MASK) != GX_VP_PAD_SELECT_TFT) {
-+ val &= ~GX_VP_PAD_SELECT_MASK;
-+ val |= GX_VP_PAD_SELECT_TFT;
-+ wrmsrl(GX_VP_MSR_PAD_SELECT, val);
-+ }
-
- if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
-- fp |= GX_FP_PT2_VSP;
-+ sync |= GX_FP_PT2_VSP;
-
- if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
-- fp |= GX_FP_PT2_HSP;
-+ sync |= GX_FP_PT2_HSP;
-
-- writel(fp, par->vid_regs + GX_FP_PT2);
-+ /* We only need to turn off the panel if something changed */
-
-- /* Set the dither control */
-- writel(0x70, par->vid_regs + GX_FP_DFC);
-+ fp1 = readl(par->vid_regs + GX_FP_PT1);
-+ fp2 = readl(par->vid_regs + GX_FP_PT2);
-+
-+ if (!CMP(fp1, GX_FP_PT1_VSIZE_MASK, info->var.yres << GX_FP_PT1_VSIZE_SHIFT) ||
-+ (fp2 != (0x0F100000 | sync))) {
-+
-+ /* Turn off the panel */
-+
-+#ifdef NOTUSED
-+ /* Do we really need to turn off the panel? */
-+ /* Possibly - we have a glitch somewhere */
-
-- /* Enable the FP data and power (in case the BIOS didn't) */
-+ fp = readl(par->vid_regs + GX_FP_PM);
-+ fp &= ~GX_FP_PM_P;
-+ writel(fp, par->vid_regs + GX_FP_PM);
-+#endif
-
-- fp = readl(par->vid_regs + GX_DCFG);
-- fp |= GX_DCFG_FP_PWR_EN | GX_DCFG_FP_DATA_EN;
-- writel(fp, par->vid_regs + GX_DCFG);
-+ /* Timing 1 */
-+ fp1 &= GX_FP_PT1_VSIZE_MASK;
-+ fp1 |= info->var.yres << GX_FP_PT1_VSIZE_SHIFT;
-+ writel(fp, par->vid_regs + GX_FP_PT1);
-
-- /* Unblank the panel */
-+ /* Timing 2 */
-+ writel(0x0F100000 | sync, par->vid_regs + GX_FP_PT2);
-+ }
-+
-+ /* Set the dither control */
-+ if (readl(par->vid_regs + GX_FP_DFC) != 0x70) {
-+ writel(0x70, par->vid_regs + GX_FP_DFC);
-+ }
-+
-+ /* Turn on the panel */
-
- fp = readl(par->vid_regs + GX_FP_PM);
-- fp |= GX_FP_PM_P;
-- writel(fp, par->vid_regs + GX_FP_PM);
-+
-+ if (!(fp & 0x09))
-+ writel(fp | GX_FP_PM_P, par->vid_regs + GX_FP_PM);
- }
-
-+#define DCFG_DEFAULT_VAL GX_DCFG_CRT_SYNC_SKW_DFLT | GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN | \
-+GX_DCFG_CRT_EN | GX_DCFG_DAC_BL_EN
-+
- static void gx_configure_display(struct fb_info *info)
- {
- struct geodefb_par *par = info->par;
-- u32 dcfg, misc;
-+ u32 dcfg, misc, sync = 0;
-
- /* Set up the MISC register */
--
- misc = readl(par->vid_regs + GX_MISC);
-
-- /* Power up the DAC */
-- misc &= ~(GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN);
-+ /* We leave gamma enabled if it was already enabled.
-+ Although the hardware enables it without setting
-+ up the gamma table, the BIOS or bootloader ought
-+ to have either disabled it or loaded a table by now */
-
-- /* Disable gamma correction */
-- misc |= GX_MISC_GAM_EN;
-
-- writel(misc, par->vid_regs + GX_MISC);
-
-- /* Write the display configuration */
-- dcfg = readl(par->vid_regs + GX_DCFG);
-+ if (par->enable_crt) {
-+ /* Power up the CRT DACs */
-+ if (misc & ( GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN)) {
-+ misc &= ~(GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN);
-+ writel(misc, par->vid_regs + GX_MISC);
-+ }
-
-- /* Disable hsync and vsync */
-- dcfg &= ~(GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN);
-- writel(dcfg, par->vid_regs + GX_DCFG);
-+ if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
-+ sync |= GX_DCFG_CRT_HSYNC_POL;
-
-- /* Clear bits from existing mode. */
-- dcfg &= ~(GX_DCFG_CRT_SYNC_SKW_MASK
-- | GX_DCFG_CRT_HSYNC_POL | GX_DCFG_CRT_VSYNC_POL
-- | GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN);
-+ if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
-+ sync |= GX_DCFG_CRT_VSYNC_POL;
-+ }
-+ else {
-+ /* Turn off the CRT DACs in FP mode - we don't need them */
-+ if ((misc & (GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN))) {
-+ misc |= (GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN);
-+ writel(misc, par->vid_regs + GX_MISC);
-+ }
-+ }
-
-- /* Set default sync skew. */
-- dcfg |= GX_DCFG_CRT_SYNC_SKW_DFLT;
-+ /* Write the display configuration */
-+ dcfg = readl(par->vid_regs + GX_DCFG);
-
-- /* Enable hsync and vsync. */
-- dcfg |= GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN;
-+ if (!CMP(dcfg, DCFG_DEFAULT_VAL | GX_DCFG_CRT_HSYNC_POL | GX_DCFG_CRT_VSYNC_POL,
-+ DCFG_DEFAULT_VAL | sync)) {
-
-- /* Sync polarities. */
-- if (info->var.sync & FB_SYNC_HOR_HIGH_ACT)
-- dcfg |= GX_DCFG_CRT_HSYNC_POL;
-- if (info->var.sync & FB_SYNC_VERT_HIGH_ACT)
-- dcfg |= GX_DCFG_CRT_VSYNC_POL;
-+ /* Disable hsync and vsync */
-+ dcfg &= ~(GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN);
-+ writel(dcfg, par->vid_regs + GX_DCFG);
-
-- /* Enable the display logic */
-- /* Set up the DACS to blank normally */
-+ /* Clear bits from existing mode. */
-+ dcfg &= ~(GX_DCFG_CRT_SYNC_SKW_MASK
-+ | GX_DCFG_CRT_HSYNC_POL | GX_DCFG_CRT_VSYNC_POL
-+ | GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN);
-
-- dcfg |= GX_DCFG_CRT_EN | GX_DCFG_DAC_BL_EN;
-+ /* Set default sync skew. */
-+ dcfg |= GX_DCFG_CRT_SYNC_SKW_DFLT;
-
-- /* Enable the external DAC VREF? */
-+ /* Enable hsync and vsync. */
-+ dcfg |= GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN;
-
-- writel(dcfg, par->vid_regs + GX_DCFG);
-+ /* Enable the display logic */
-+ dcfg |= GX_DCFG_CRT_EN | GX_DCFG_DAC_BL_EN;
-+
-+ writel(dcfg, par->vid_regs + GX_DCFG);
-+ }
-
- /* Set up the flat panel (if it is enabled) */
-
-@@ -289,6 +348,100 @@ static void gx_configure_display(struct
- gx_configure_tft(info);
- }
-
-+int gxfb_powerdown(struct fb_info *info)
-+{
-+ struct geodefb_par *par = info->par;
-+
-+ /* We're already suspended */
-+
-+ if (par->state != FB_POWER_STATE_ON)
-+ return 0;
-+
-+ /* Save the registers */
-+ gx_save_regs(info, &gx_saved_regs);
-+
-+ /* Shut down the engine */
-+
-+ writel(gx_saved_regs.vp.r.vcfg & ~0x01, par->vid_regs + GX_VCFG);
-+ writel(gx_saved_regs.vp.r.dcfg & ~0x0F, par->vid_regs + GX_DCFG);
-+
-+ /* Turn off the flat panel unless we are attached to a DCON */
-+ if (!olpc_has_dcon())
-+ writel(gx_saved_regs.fp.r.pm & ~GX_FP_PM_P, par->vid_regs + GX_FP_PM);
-+
-+ writel(0x4758, par->dc_regs + DC_UNLOCK);
-+
-+ writel(gx_saved_regs.dc.r.gcfg & ~0x0F,
-+ par->dc_regs + DC_GENERAL_CFG);
-+
-+ writel(gx_saved_regs.dc.r.dcfg & ~0x19,
-+ par->dc_regs + DC_DISPLAY_CFG);
-+
-+ par->state = FB_POWER_STATE_SUSPEND;
-+
-+ return 0;
-+}
-+
-+int gxfb_powerup(struct fb_info *info)
-+{
-+ struct geodefb_par *par = info->par;
-+ u32 val;
-+
-+ if (par->state == FB_POWER_STATE_SUSPEND) {
-+
-+ writel(gx_saved_regs.dc.r.dcfg,
-+ par->dc_regs + DC_DISPLAY_CFG);
-+
-+ writel(gx_saved_regs.vp.r.vcfg, par->vid_regs + GX_VCFG);
-+ writel(gx_saved_regs.vp.r.dcfg, par->vid_regs + GX_DCFG);
-+
-+ val = readl(par->vid_regs + GX_FP_PM);
-+
-+ /* power up the panel if it needs it; we don't always power it down */
-+ if (!(val & 0x09)) {
-+ writel(gx_saved_regs.fp.r.pm, par->vid_regs + GX_FP_PM);
-+ mdelay(64);
-+ }
-+ }
-+
-+ /* If the panel is currently on its way up, then wait up to 100ms
-+ for it */
-+
-+ if (readl(par->vid_regs + GX_FP_PM) & 0x08) {
-+ int i;
-+
-+ for(i = 0; i < 10; i++) {
-+ if (readl(par->vid_regs + GX_FP_PM) & 0x01)
-+ break;
-+
-+ mdelay(10);
-+ }
-+
-+ if (i == 10)
-+ printk(KERN_ERR "gxfb: Panel power up timed out\n");
-+ }
-+
-+ if (par->state == FB_POWER_STATE_ON)
-+ return 0;
-+
-+ switch(par->state) {
-+ case FB_POWER_STATE_OFF:
-+ gx_restore_regs(info, &gx_saved_regs);
-+ break;
-+
-+ case FB_POWER_STATE_SUSPEND:
-+ /* Do this because it will turn on the FIFO which will
-+ start the line count */
-+ writel(gx_saved_regs.dc.r.gcfg,
-+ par->dc_regs + DC_GENERAL_CFG);
-+ writel(0x0, par->dc_regs + DC_UNLOCK);
-+ break;
-+ }
-+
-+ par->state = FB_POWER_STATE_ON;
-+ return 0;
-+}
-+
- static int gx_blank_display(struct fb_info *info, int blank_mode)
- {
- struct geodefb_par *par = info->par;
-@@ -315,6 +468,7 @@ static int gx_blank_display(struct fb_in
- default:
- return -EINVAL;
- }
-+
- dcfg = readl(par->vid_regs + GX_DCFG);
- dcfg &= ~(GX_DCFG_DAC_BL_EN
- | GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN);
-@@ -326,7 +480,7 @@ static int gx_blank_display(struct fb_in
- dcfg |= GX_DCFG_VSYNC_EN;
- writel(dcfg, par->vid_regs + GX_DCFG);
-
-- /* Power on/off flat panel. */
-+ /* Power on/off flat panel */
-
- if (par->enable_crt == 0) {
- fp_pm = readl(par->vid_regs + GX_FP_PM);
-@@ -340,8 +494,37 @@ static int gx_blank_display(struct fb_in
- return 0;
- }
-
-+extern struct fb_info *gxfb_info;
-+
-+/* This function controls the flatpanel power sequencing - this is used
-+ by the OLPC power management engine to enable the FP sequencing much
-+ earlier in the resume process
-+*/
-+
-+void gxfb_flatpanel_control(int state)
-+{
-+ struct geodefb_par *par = gxfb_info->par;
-+ u32 val, fp = readl(par->vid_regs + GX_FP_PM);
-+ val = fp;
-+
-+ /* Turn on the panel if it isn't aleady */
-+
-+ if (state) {
-+ if (!(val & 0x01))
-+ val |= GX_FP_PM_P;
-+ }
-+ else {
-+ if (!(val & 0x02))
-+ val &= ~GX_FP_PM_P;
-+ }
-+
-+ if (val != fp)
-+ writel(val, par->vid_regs + GX_FP_PM);
-+}
-+
- struct geode_vid_ops gx_vid_ops = {
- .set_dclk = gx_set_dclk_frequency,
-+ .get_dclk = gx_get_dclk,
- .configure_display = gx_configure_display,
- .blank_display = gx_blank_display,
- };
-Index: linux-2.6.23.17/drivers/video/geode/video_gx.h
-===================================================================
---- linux-2.6.23.17.orig/drivers/video/geode/video_gx.h
-+++ linux-2.6.23.17/drivers/video/geode/video_gx.h
-@@ -11,6 +11,8 @@
- #ifndef __VIDEO_GX_H__
- #define __VIDEO_GX_H__
-
-+#include "geode_regs.h"
-+
- extern struct geode_vid_ops gx_vid_ops;
-
- /* GX Flatpanel control MSR */
-@@ -20,6 +22,8 @@ extern struct geode_vid_ops gx_vid_ops;
-
- /* Geode GX video processor registers */
-
-+#define GX_VCFG 0x0000
-+
- #define GX_DCFG 0x0008
- # define GX_DCFG_CRT_EN 0x00000001
- # define GX_DCFG_HSYNC_EN 0x00000002
-@@ -42,6 +46,14 @@ extern struct geode_vid_ops gx_vid_ops;
- #define GX_MISC_DAC_PWRDN 0x00000400
- #define GX_MISC_A_PWRDN 0x00000800
-
-+/* Gamma correction RAM - address and data registers */
-+
-+#define GX_GAR 0x038
-+#define GX_GDR 0x040
-+
-+#define GXFB_GAMMA_DWORDS 256 /* number of dwords in the gamma ram */
-+#define GXFB_GAMMA_SIZE (GXFB_GAMMA_DWORDS * sizeof(unsigned int))
-+
- /* Geode GX flat panel display control registers */
-
- #define GX_FP_PT1 0x0400
-@@ -69,4 +81,13 @@ extern struct geode_vid_ops gx_vid_ops;
- # define MSR_GLCP_DOTPLL_BYPASS (0x0000000000008000ull)
- # define MSR_GLCP_DOTPLL_LOCK (0x0000000002000000ull)
-
-+int gxfb_powerdown(struct fb_info *info);
-+int gxfb_powerup(struct fb_info *info);
-+
-+void gx_set_dclk_frequency(struct fb_info *info);
-+unsigned int gx_get_dclk(struct fb_info *info);
-+
-+void gx_save_regs(struct fb_info *info, struct geoderegs *regs);
-+void gx_restore_regs(struct fb_info *info, struct geoderegs *regs);
-+
- #endif /* !__VIDEO_GX_H__ */
-Index: linux-2.6.23.17/drivers/video/modedb.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/video/modedb.c
-+++ linux-2.6.23.17/drivers/video/modedb.c
-@@ -33,6 +33,8 @@ const char *global_mode_option;
- * Standard video mode definitions (taken from XFree86)
- */
-
-+#define DEFAULT_MODEDB_INDEX 0
-+
- static const struct fb_videomode modedb[] = {
- {
- /* 640x400 @ 70 Hz, 31.5 kHz hsync */
-@@ -504,7 +506,8 @@ int fb_find_mode(struct fb_var_screeninf
- }
-
- if (!default_mode)
-- default_mode = &db[0];
-+ default_mode = (db == modedb) ?
-+ &modedb[DEFAULT_MODEDB_INDEX] : &db[0];
-
- if (!default_bpp)
- default_bpp = 8;
-Index: linux-2.6.23.17/fs/Kconfig
-===================================================================
---- linux-2.6.23.17.orig/fs/Kconfig
-+++ linux-2.6.23.17/fs/Kconfig
-@@ -1003,6 +1003,23 @@ config HUGETLBFS
- config HUGETLB_PAGE
- def_bool HUGETLBFS
-
-+config PROMFS_FS
-+ tristate "PromFS IEEE 1275 file system support"
-+ depends on SPARC || PPC || OLPC
-+ help
-+ PromFS is a file system interface to various IEEE-1275 compatible
-+ firmwares. If you have such a firmware (Sparc64, PowerPC, and
-+ some other architectures and embedded systems have such firmwares,
-+ with names like "OpenBoot (tm)" and "OpenFirmware"), say Y here
-+ to be able to access the firmware's device-tree from Linux.
-+
-+ The firmware device-tree is available as a virtual file system,
-+ can be mounted under /prom with the command "mount -t promfs
-+ none /prom".
-+
-+ To compile PromFS support as a module, choose M here; the module
-+ will be called promfs. If unsure, choose M.
-+
- config RAMFS
- bool
- default y
-@@ -1229,6 +1246,14 @@ config JFFS2_FS_WRITEBUFFER
- - NOR flash with transparent ECC
- - DataFlash
-
-+config JFFS2_FS_WBUF_VERIFY
-+ bool "Verify JFFS2 write-buffer reads"
-+ depends on JFFS2_FS_WRITEBUFFER
-+ default n
-+ help
-+ This causes JFFS2 to read back every page written through the
-+ write-buffer, and check for errors.
-+
- config JFFS2_SUMMARY
- bool "JFFS2 summary support (EXPERIMENTAL)"
- depends on JFFS2_FS && EXPERIMENTAL
-@@ -1299,52 +1324,52 @@ config JFFS2_ZLIB
- select ZLIB_DEFLATE
- depends on JFFS2_FS
- default y
-- help
-- Zlib is designed to be a free, general-purpose, legally unencumbered,
-- lossless data-compression library for use on virtually any computer
-- hardware and operating system. See <http://www.gzip.org/zlib/> for
-- further information.
-+ help
-+ Zlib is designed to be a free, general-purpose, legally unencumbered,
-+ lossless data-compression library for use on virtually any computer
-+ hardware and operating system. See <http://www.gzip.org/zlib/> for
-+ further information.
-
-- Say 'Y' if unsure.
-+ Say 'Y' if unsure.
-
- config JFFS2_RTIME
- bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS
- depends on JFFS2_FS
- default y
-- help
-- Rtime does manage to recompress already-compressed data. Say 'Y' if unsure.
-+ help
-+ Rtime does manage to recompress already-compressed data. Say 'Y' if unsure.
-
- config JFFS2_RUBIN
- bool "JFFS2 RUBIN compression support" if JFFS2_COMPRESSION_OPTIONS
- depends on JFFS2_FS
- default n
-- help
-- RUBINMIPS and DYNRUBIN compressors. Say 'N' if unsure.
-+ help
-+ RUBINMIPS and DYNRUBIN compressors. Say 'N' if unsure.
-
- choice
-- prompt "JFFS2 default compression mode" if JFFS2_COMPRESSION_OPTIONS
-- default JFFS2_CMODE_PRIORITY
-- depends on JFFS2_FS
-- help
-- You can set here the default compression mode of JFFS2 from
-- the available compression modes. Don't touch if unsure.
-+ prompt "JFFS2 default compression mode" if JFFS2_COMPRESSION_OPTIONS
-+ default JFFS2_CMODE_PRIORITY
-+ depends on JFFS2_FS
-+ help
-+ You can set here the default compression mode of JFFS2 from
-+ the available compression modes. Don't touch if unsure.
-
- config JFFS2_CMODE_NONE
-- bool "no compression"
-- help
-- Uses no compression.
-+ bool "no compression"
-+ help
-+ Uses no compression.
-
- config JFFS2_CMODE_PRIORITY
-- bool "priority"
-- help
-- Tries the compressors in a predefined order and chooses the first
-- successful one.
-+ bool "priority"
-+ help
-+ Tries the compressors in a predefined order and chooses the first
-+ successful one.
-
- config JFFS2_CMODE_SIZE
-- bool "size (EXPERIMENTAL)"
-- help
-- Tries all compressors and chooses the one which has the smallest
-- result.
-+ bool "size (EXPERIMENTAL)"
-+ help
-+ Tries all compressors and chooses the one which has the smallest
-+ result.
-
- endchoice
-
-Index: linux-2.6.23.17/fs/Makefile
-===================================================================
---- linux-2.6.23.17.orig/fs/Makefile
-+++ linux-2.6.23.17/fs/Makefile
-@@ -110,6 +110,7 @@ obj-$(CONFIG_ADFS_FS) += adfs/
- obj-$(CONFIG_FUSE_FS) += fuse/
- obj-$(CONFIG_UDF_FS) += udf/
- obj-$(CONFIG_SUN_OPENPROMFS) += openpromfs/
-+obj-$(CONFIG_PROMFS_FS) += promfs/
- obj-$(CONFIG_JFS_FS) += jfs/
- obj-$(CONFIG_XFS_FS) += xfs/
- obj-$(CONFIG_9P_FS) += 9p/
-Index: linux-2.6.23.17/fs/jffs2/background.c
-===================================================================
---- linux-2.6.23.17.orig/fs/jffs2/background.c
-+++ linux-2.6.23.17/fs/jffs2/background.c
-@@ -23,8 +23,8 @@ static int jffs2_garbage_collect_thread(
- void jffs2_garbage_collect_trigger(struct jffs2_sb_info *c)
- {
- spin_lock(&c->erase_completion_lock);
-- if (c->gc_task && jffs2_thread_should_wake(c))
-- send_sig(SIGHUP, c->gc_task, 1);
-+ if (c->gc_task && jffs2_thread_should_wake(c))
-+ send_sig(SIGHUP, c->gc_task, 1);
- spin_unlock(&c->erase_completion_lock);
- }
-
-Index: linux-2.6.23.17/fs/jffs2/compr.c
-===================================================================
---- linux-2.6.23.17.orig/fs/jffs2/compr.c
-+++ linux-2.6.23.17/fs/jffs2/compr.c
-@@ -5,7 +5,7 @@
- * Created by Arjan van de Ven <arjanv@redhat.com>
- *
- * Copyright © 2004 Ferenc Havasi <havasi@inf.u-szeged.hu>,
-- * University of Szeged, Hungary
-+ * University of Szeged, Hungary
- *
- * For licensing information, see the file 'LICENCE' in this directory.
- *
-@@ -43,121 +43,122 @@ static uint32_t none_stat_compr_blocks=0
- * *datalen accordingly to show the amount of data which were compressed.
- */
- uint16_t jffs2_compress(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
-- unsigned char *data_in, unsigned char **cpage_out,
-- uint32_t *datalen, uint32_t *cdatalen)
-+ unsigned char *data_in, unsigned char **cpage_out,
-+ uint32_t *datalen, uint32_t *cdatalen)
- {
- int ret = JFFS2_COMPR_NONE;
-- int compr_ret;
-- struct jffs2_compressor *this, *best=NULL;
-- unsigned char *output_buf = NULL, *tmp_buf;
-- uint32_t orig_slen, orig_dlen;
-- uint32_t best_slen=0, best_dlen=0;
--
-- switch (jffs2_compression_mode) {
-- case JFFS2_COMPR_MODE_NONE:
-- break;
-- case JFFS2_COMPR_MODE_PRIORITY:
-- output_buf = kmalloc(*cdatalen,GFP_KERNEL);
-- if (!output_buf) {
-- printk(KERN_WARNING "JFFS2: No memory for compressor allocation. Compression failed.\n");
-- goto out;
-- }
-- orig_slen = *datalen;
-- orig_dlen = *cdatalen;
-- spin_lock(&jffs2_compressor_list_lock);
-- list_for_each_entry(this, &jffs2_compressor_list, list) {
-- /* Skip decompress-only backwards-compatibility and disabled modules */
-- if ((!this->compress)||(this->disabled))
-- continue;
--
-- this->usecount++;
-- spin_unlock(&jffs2_compressor_list_lock);
-- *datalen = orig_slen;
-- *cdatalen = orig_dlen;
-- compr_ret = this->compress(data_in, output_buf, datalen, cdatalen, NULL);
-- spin_lock(&jffs2_compressor_list_lock);
-- this->usecount--;
-- if (!compr_ret) {
-- ret = this->compr;
-- this->stat_compr_blocks++;
-- this->stat_compr_orig_size += *datalen;
-- this->stat_compr_new_size += *cdatalen;
-- break;
-- }
-- }
-- spin_unlock(&jffs2_compressor_list_lock);
-- if (ret == JFFS2_COMPR_NONE) kfree(output_buf);
-- break;
-- case JFFS2_COMPR_MODE_SIZE:
-- orig_slen = *datalen;
-- orig_dlen = *cdatalen;
-- spin_lock(&jffs2_compressor_list_lock);
-- list_for_each_entry(this, &jffs2_compressor_list, list) {
-- /* Skip decompress-only backwards-compatibility and disabled modules */
-- if ((!this->compress)||(this->disabled))
-- continue;
-- /* Allocating memory for output buffer if necessary */
-- if ((this->compr_buf_size<orig_dlen)&&(this->compr_buf)) {
-- spin_unlock(&jffs2_compressor_list_lock);
-- kfree(this->compr_buf);
-- spin_lock(&jffs2_compressor_list_lock);
-- this->compr_buf_size=0;
-- this->compr_buf=NULL;
-- }
-- if (!this->compr_buf) {
-- spin_unlock(&jffs2_compressor_list_lock);
-- tmp_buf = kmalloc(orig_dlen,GFP_KERNEL);
-- spin_lock(&jffs2_compressor_list_lock);
-- if (!tmp_buf) {
-- printk(KERN_WARNING "JFFS2: No memory for compressor allocation. (%d bytes)\n",orig_dlen);
-- continue;
-- }
-- else {
-- this->compr_buf = tmp_buf;
-- this->compr_buf_size = orig_dlen;
-- }
-- }
-- this->usecount++;
-- spin_unlock(&jffs2_compressor_list_lock);
-- *datalen = orig_slen;
-- *cdatalen = orig_dlen;
-- compr_ret = this->compress(data_in, this->compr_buf, datalen, cdatalen, NULL);
-- spin_lock(&jffs2_compressor_list_lock);
-- this->usecount--;
-- if (!compr_ret) {
-- if ((!best_dlen)||(best_dlen>*cdatalen)) {
-- best_dlen = *cdatalen;
-- best_slen = *datalen;
-- best = this;
-- }
-- }
-- }
-- if (best_dlen) {
-- *cdatalen = best_dlen;
-- *datalen = best_slen;
-- output_buf = best->compr_buf;
-- best->compr_buf = NULL;
-- best->compr_buf_size = 0;
-- best->stat_compr_blocks++;
-- best->stat_compr_orig_size += best_slen;
-- best->stat_compr_new_size += best_dlen;
-- ret = best->compr;
-- }
-- spin_unlock(&jffs2_compressor_list_lock);
-- break;
-- default:
-- printk(KERN_ERR "JFFS2: unknow compression mode.\n");
-- }
-+ int compr_ret;
-+ struct jffs2_compressor *this, *best=NULL;
-+ unsigned char *output_buf = NULL, *tmp_buf;
-+ uint32_t orig_slen, orig_dlen;
-+ uint32_t best_slen=0, best_dlen=0;
-+
-+ switch (jffs2_compression_mode) {
-+ case JFFS2_COMPR_MODE_NONE:
-+ break;
-+ case JFFS2_COMPR_MODE_PRIORITY:
-+ output_buf = kmalloc(*cdatalen,GFP_KERNEL);
-+ if (!output_buf) {
-+ printk(KERN_WARNING "JFFS2: No memory for compressor allocation. Compression failed.\n");
-+ goto out;
-+ }
-+ orig_slen = *datalen;
-+ orig_dlen = *cdatalen;
-+ spin_lock(&jffs2_compressor_list_lock);
-+ list_for_each_entry(this, &jffs2_compressor_list, list) {
-+ /* Skip decompress-only backwards-compatibility and disabled modules */
-+ if ((!this->compress)||(this->disabled))
-+ continue;
-+
-+ this->usecount++;
-+ spin_unlock(&jffs2_compressor_list_lock);
-+ *datalen = orig_slen;
-+ *cdatalen = orig_dlen;
-+ compr_ret = this->compress(data_in, output_buf, datalen, cdatalen, NULL);
-+ spin_lock(&jffs2_compressor_list_lock);
-+ this->usecount--;
-+ if (!compr_ret) {
-+ ret = this->compr;
-+ this->stat_compr_blocks++;
-+ this->stat_compr_orig_size += *datalen;
-+ this->stat_compr_new_size += *cdatalen;
-+ break;
-+ }
-+ }
-+ spin_unlock(&jffs2_compressor_list_lock);
-+ if (ret == JFFS2_COMPR_NONE)
-+ kfree(output_buf);
-+ break;
-+ case JFFS2_COMPR_MODE_SIZE:
-+ orig_slen = *datalen;
-+ orig_dlen = *cdatalen;
-+ spin_lock(&jffs2_compressor_list_lock);
-+ list_for_each_entry(this, &jffs2_compressor_list, list) {
-+ /* Skip decompress-only backwards-compatibility and disabled modules */
-+ if ((!this->compress)||(this->disabled))
-+ continue;
-+ /* Allocating memory for output buffer if necessary */
-+ if ((this->compr_buf_size<orig_dlen)&&(this->compr_buf)) {
-+ spin_unlock(&jffs2_compressor_list_lock);
-+ kfree(this->compr_buf);
-+ spin_lock(&jffs2_compressor_list_lock);
-+ this->compr_buf_size=0;
-+ this->compr_buf=NULL;
-+ }
-+ if (!this->compr_buf) {
-+ spin_unlock(&jffs2_compressor_list_lock);
-+ tmp_buf = kmalloc(orig_dlen,GFP_KERNEL);
-+ spin_lock(&jffs2_compressor_list_lock);
-+ if (!tmp_buf) {
-+ printk(KERN_WARNING "JFFS2: No memory for compressor allocation. (%d bytes)\n",orig_dlen);
-+ continue;
-+ }
-+ else {
-+ this->compr_buf = tmp_buf;
-+ this->compr_buf_size = orig_dlen;
-+ }
-+ }
-+ this->usecount++;
-+ spin_unlock(&jffs2_compressor_list_lock);
-+ *datalen = orig_slen;
-+ *cdatalen = orig_dlen;
-+ compr_ret = this->compress(data_in, this->compr_buf, datalen, cdatalen, NULL);
-+ spin_lock(&jffs2_compressor_list_lock);
-+ this->usecount--;
-+ if (!compr_ret) {
-+ if ((!best_dlen)||(best_dlen>*cdatalen)) {
-+ best_dlen = *cdatalen;
-+ best_slen = *datalen;
-+ best = this;
-+ }
-+ }
-+ }
-+ if (best_dlen) {
-+ *cdatalen = best_dlen;
-+ *datalen = best_slen;
-+ output_buf = best->compr_buf;
-+ best->compr_buf = NULL;
-+ best->compr_buf_size = 0;
-+ best->stat_compr_blocks++;
-+ best->stat_compr_orig_size += best_slen;
-+ best->stat_compr_new_size += best_dlen;
-+ ret = best->compr;
-+ }
-+ spin_unlock(&jffs2_compressor_list_lock);
-+ break;
-+ default:
-+ printk(KERN_ERR "JFFS2: unknow compression mode.\n");
-+ }
- out:
-- if (ret == JFFS2_COMPR_NONE) {
-- *cpage_out = data_in;
-- *datalen = *cdatalen;
-- none_stat_compr_blocks++;
-- none_stat_compr_size += *datalen;
-- }
-- else {
-- *cpage_out = output_buf;
-- }
-+ if (ret == JFFS2_COMPR_NONE) {
-+ *cpage_out = data_in;
-+ *datalen = *cdatalen;
-+ none_stat_compr_blocks++;
-+ none_stat_compr_size += *datalen;
-+ }
-+ else {
-+ *cpage_out = output_buf;
-+ }
- return ret;
- }
-
-@@ -165,8 +166,8 @@ int jffs2_decompress(struct jffs2_sb_inf
- uint16_t comprtype, unsigned char *cdata_in,
- unsigned char *data_out, uint32_t cdatalen, uint32_t datalen)
- {
-- struct jffs2_compressor *this;
-- int ret;
-+ struct jffs2_compressor *this;
-+ int ret;
-
- /* Older code had a bug where it would write non-zero 'usercompr'
- fields. Deal with it. */
-@@ -177,32 +178,32 @@ int jffs2_decompress(struct jffs2_sb_inf
- case JFFS2_COMPR_NONE:
- /* This should be special-cased elsewhere, but we might as well deal with it */
- memcpy(data_out, cdata_in, datalen);
-- none_stat_decompr_blocks++;
-+ none_stat_decompr_blocks++;
- break;
- case JFFS2_COMPR_ZERO:
- memset(data_out, 0, datalen);
- break;
- default:
-- spin_lock(&jffs2_compressor_list_lock);
-- list_for_each_entry(this, &jffs2_compressor_list, list) {
-- if (comprtype == this->compr) {
-- this->usecount++;
-- spin_unlock(&jffs2_compressor_list_lock);
-- ret = this->decompress(cdata_in, data_out, cdatalen, datalen, NULL);
-- spin_lock(&jffs2_compressor_list_lock);
-- if (ret) {
-- printk(KERN_WARNING "Decompressor \"%s\" returned %d\n", this->name, ret);
-- }
-- else {
-- this->stat_decompr_blocks++;
-- }
-- this->usecount--;
-- spin_unlock(&jffs2_compressor_list_lock);
-- return ret;
-- }
-- }
-+ spin_lock(&jffs2_compressor_list_lock);
-+ list_for_each_entry(this, &jffs2_compressor_list, list) {
-+ if (comprtype == this->compr) {
-+ this->usecount++;
-+ spin_unlock(&jffs2_compressor_list_lock);
-+ ret = this->decompress(cdata_in, data_out, cdatalen, datalen, NULL);
-+ spin_lock(&jffs2_compressor_list_lock);
-+ if (ret) {
-+ printk(KERN_WARNING "Decompressor \"%s\" returned %d\n", this->name, ret);
-+ }
-+ else {
-+ this->stat_decompr_blocks++;
-+ }
-+ this->usecount--;
-+ spin_unlock(&jffs2_compressor_list_lock);
-+ return ret;
-+ }
-+ }
- printk(KERN_WARNING "JFFS2 compression type 0x%02x not available.\n", comprtype);
-- spin_unlock(&jffs2_compressor_list_lock);
-+ spin_unlock(&jffs2_compressor_list_lock);
- return -EIO;
- }
- return 0;
-@@ -210,108 +211,108 @@ int jffs2_decompress(struct jffs2_sb_inf
-
- int jffs2_register_compressor(struct jffs2_compressor *comp)
- {
-- struct jffs2_compressor *this;
-+ struct jffs2_compressor *this;
-
-- if (!comp->name) {
-- printk(KERN_WARNING "NULL compressor name at registering JFFS2 compressor. Failed.\n");
-- return -1;
-- }
-- comp->compr_buf_size=0;
-- comp->compr_buf=NULL;
-- comp->usecount=0;
-- comp->stat_compr_orig_size=0;
-- comp->stat_compr_new_size=0;
-- comp->stat_compr_blocks=0;
-- comp->stat_decompr_blocks=0;
-- D1(printk(KERN_DEBUG "Registering JFFS2 compressor \"%s\"\n", comp->name));
--
-- spin_lock(&jffs2_compressor_list_lock);
--
-- list_for_each_entry(this, &jffs2_compressor_list, list) {
-- if (this->priority < comp->priority) {
-- list_add(&comp->list, this->list.prev);
-- goto out;
-- }
-- }
-- list_add_tail(&comp->list, &jffs2_compressor_list);
-+ if (!comp->name) {
-+ printk(KERN_WARNING "NULL compressor name at registering JFFS2 compressor. Failed.\n");
-+ return -1;
-+ }
-+ comp->compr_buf_size=0;
-+ comp->compr_buf=NULL;
-+ comp->usecount=0;
-+ comp->stat_compr_orig_size=0;
-+ comp->stat_compr_new_size=0;
-+ comp->stat_compr_blocks=0;
-+ comp->stat_decompr_blocks=0;
-+ D1(printk(KERN_DEBUG "Registering JFFS2 compressor \"%s\"\n", comp->name));
-+
-+ spin_lock(&jffs2_compressor_list_lock);
-+
-+ list_for_each_entry(this, &jffs2_compressor_list, list) {
-+ if (this->priority < comp->priority) {
-+ list_add(&comp->list, this->list.prev);
-+ goto out;
-+ }
-+ }
-+ list_add_tail(&comp->list, &jffs2_compressor_list);
- out:
-- D2(list_for_each_entry(this, &jffs2_compressor_list, list) {
-- printk(KERN_DEBUG "Compressor \"%s\", prio %d\n", this->name, this->priority);
-- })
-+ D2(list_for_each_entry(this, &jffs2_compressor_list, list) {
-+ printk(KERN_DEBUG "Compressor \"%s\", prio %d\n", this->name, this->priority);
-+ })
-
-- spin_unlock(&jffs2_compressor_list_lock);
-+ spin_unlock(&jffs2_compressor_list_lock);
-
-- return 0;
-+ return 0;
- }
-
- int jffs2_unregister_compressor(struct jffs2_compressor *comp)
- {
-- D2(struct jffs2_compressor *this;)
-+ D2(struct jffs2_compressor *this;)
-+
-+ D1(printk(KERN_DEBUG "Unregistering JFFS2 compressor \"%s\"\n", comp->name));
-
-- D1(printk(KERN_DEBUG "Unregistering JFFS2 compressor \"%s\"\n", comp->name));
-+ spin_lock(&jffs2_compressor_list_lock);
-
-- spin_lock(&jffs2_compressor_list_lock);
-+ if (comp->usecount) {
-+ spin_unlock(&jffs2_compressor_list_lock);
-+ printk(KERN_WARNING "JFFS2: Compressor modul is in use. Unregister failed.\n");
-+ return -1;
-+ }
-+ list_del(&comp->list);
-
-- if (comp->usecount) {
-- spin_unlock(&jffs2_compressor_list_lock);
-- printk(KERN_WARNING "JFFS2: Compressor modul is in use. Unregister failed.\n");
-- return -1;
-- }
-- list_del(&comp->list);
--
-- D2(list_for_each_entry(this, &jffs2_compressor_list, list) {
-- printk(KERN_DEBUG "Compressor \"%s\", prio %d\n", this->name, this->priority);
-- })
-- spin_unlock(&jffs2_compressor_list_lock);
-- return 0;
-+ D2(list_for_each_entry(this, &jffs2_compressor_list, list) {
-+ printk(KERN_DEBUG "Compressor \"%s\", prio %d\n", this->name, this->priority);
-+ })
-+ spin_unlock(&jffs2_compressor_list_lock);
-+ return 0;
- }
-
- void jffs2_free_comprbuf(unsigned char *comprbuf, unsigned char *orig)
- {
-- if (orig != comprbuf)
-- kfree(comprbuf);
-+ if (orig != comprbuf)
-+ kfree(comprbuf);
- }
-
- int __init jffs2_compressors_init(void)
- {
- /* Registering compressors */
- #ifdef CONFIG_JFFS2_ZLIB
-- jffs2_zlib_init();
-+ jffs2_zlib_init();
- #endif
- #ifdef CONFIG_JFFS2_RTIME
-- jffs2_rtime_init();
-+ jffs2_rtime_init();
- #endif
- #ifdef CONFIG_JFFS2_RUBIN
-- jffs2_rubinmips_init();
-- jffs2_dynrubin_init();
-+ jffs2_rubinmips_init();
-+ jffs2_dynrubin_init();
- #endif
- /* Setting default compression mode */
- #ifdef CONFIG_JFFS2_CMODE_NONE
-- jffs2_compression_mode = JFFS2_COMPR_MODE_NONE;
-- D1(printk(KERN_INFO "JFFS2: default compression mode: none\n");)
-+ jffs2_compression_mode = JFFS2_COMPR_MODE_NONE;
-+ D1(printk(KERN_INFO "JFFS2: default compression mode: none\n");)
- #else
- #ifdef CONFIG_JFFS2_CMODE_SIZE
-- jffs2_compression_mode = JFFS2_COMPR_MODE_SIZE;
-- D1(printk(KERN_INFO "JFFS2: default compression mode: size\n");)
-+ jffs2_compression_mode = JFFS2_COMPR_MODE_SIZE;
-+ D1(printk(KERN_INFO "JFFS2: default compression mode: size\n");)
- #else
-- D1(printk(KERN_INFO "JFFS2: default compression mode: priority\n");)
-+ D1(printk(KERN_INFO "JFFS2: default compression mode: priority\n");)
- #endif
- #endif
-- return 0;
-+ return 0;
- }
-
- int jffs2_compressors_exit(void)
- {
- /* Unregistering compressors */
- #ifdef CONFIG_JFFS2_RUBIN
-- jffs2_dynrubin_exit();
-- jffs2_rubinmips_exit();
-+ jffs2_dynrubin_exit();
-+ jffs2_rubinmips_exit();
- #endif
- #ifdef CONFIG_JFFS2_RTIME
-- jffs2_rtime_exit();
-+ jffs2_rtime_exit();
- #endif
- #ifdef CONFIG_JFFS2_ZLIB
-- jffs2_zlib_exit();
-+ jffs2_zlib_exit();
- #endif
-- return 0;
-+ return 0;
- }
-Index: linux-2.6.23.17/fs/jffs2/compr.h
-===================================================================
---- linux-2.6.23.17.orig/fs/jffs2/compr.h
-+++ linux-2.6.23.17/fs/jffs2/compr.h
-@@ -2,7 +2,7 @@
- * JFFS2 -- Journalling Flash File System, Version 2.
- *
- * Copyright © 2004 Ferenc Havasi <havasi@inf.u-szeged.hu>,
-- * University of Szeged, Hungary
-+ * University of Szeged, Hungary
- *
- * For licensing information, see the file 'LICENCE' in this directory.
- *
-@@ -32,29 +32,29 @@
- #define JFFS2_ZLIB_PRIORITY 60
-
- #define JFFS2_RUBINMIPS_DISABLED /* RUBINs will be used only */
--#define JFFS2_DYNRUBIN_DISABLED /* for decompression */
-+#define JFFS2_DYNRUBIN_DISABLED /* for decompression */
-
- #define JFFS2_COMPR_MODE_NONE 0
- #define JFFS2_COMPR_MODE_PRIORITY 1
- #define JFFS2_COMPR_MODE_SIZE 2
-
- struct jffs2_compressor {
-- struct list_head list;
-- int priority; /* used by prirority comr. mode */
-- char *name;
-- char compr; /* JFFS2_COMPR_XXX */
-- int (*compress)(unsigned char *data_in, unsigned char *cpage_out,
-- uint32_t *srclen, uint32_t *destlen, void *model);
-- int (*decompress)(unsigned char *cdata_in, unsigned char *data_out,
-- uint32_t cdatalen, uint32_t datalen, void *model);
-- int usecount;
-- int disabled; /* if seted the compressor won't compress */
-- unsigned char *compr_buf; /* used by size compr. mode */
-- uint32_t compr_buf_size; /* used by size compr. mode */
-- uint32_t stat_compr_orig_size;
-- uint32_t stat_compr_new_size;
-- uint32_t stat_compr_blocks;
-- uint32_t stat_decompr_blocks;
-+ struct list_head list;
-+ int priority; /* used by prirority comr. mode */
-+ char *name;
-+ char compr; /* JFFS2_COMPR_XXX */
-+ int (*compress)(unsigned char *data_in, unsigned char *cpage_out,
-+ uint32_t *srclen, uint32_t *destlen, void *model);
-+ int (*decompress)(unsigned char *cdata_in, unsigned char *data_out,
-+ uint32_t cdatalen, uint32_t datalen, void *model);
-+ int usecount;
-+ int disabled; /* if set the compressor won't compress */
-+ unsigned char *compr_buf; /* used by size compr. mode */
-+ uint32_t compr_buf_size; /* used by size compr. mode */
-+ uint32_t stat_compr_orig_size;
-+ uint32_t stat_compr_new_size;
-+ uint32_t stat_compr_blocks;
-+ uint32_t stat_decompr_blocks;
- };
-
- int jffs2_register_compressor(struct jffs2_compressor *comp);
-@@ -64,12 +64,12 @@ int jffs2_compressors_init(void);
- int jffs2_compressors_exit(void);
-
- uint16_t jffs2_compress(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
-- unsigned char *data_in, unsigned char **cpage_out,
-- uint32_t *datalen, uint32_t *cdatalen);
-+ unsigned char *data_in, unsigned char **cpage_out,
-+ uint32_t *datalen, uint32_t *cdatalen);
-
- int jffs2_decompress(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
-- uint16_t comprtype, unsigned char *cdata_in,
-- unsigned char *data_out, uint32_t cdatalen, uint32_t datalen);
-+ uint16_t comprtype, unsigned char *cdata_in,
-+ unsigned char *data_out, uint32_t cdatalen, uint32_t datalen);
-
- void jffs2_free_comprbuf(unsigned char *comprbuf, unsigned char *orig);
-
-Index: linux-2.6.23.17/fs/jffs2/compr_rtime.c
-===================================================================
---- linux-2.6.23.17.orig/fs/jffs2/compr_rtime.c
-+++ linux-2.6.23.17/fs/jffs2/compr_rtime.c
-@@ -104,7 +104,7 @@ static int jffs2_rtime_decompress(unsign
- }
- }
- }
-- return 0;
-+ return 0;
- }
-
- static struct jffs2_compressor jffs2_rtime_comp = {
-Index: linux-2.6.23.17/fs/jffs2/compr_rubin.c
-===================================================================
---- linux-2.6.23.17.orig/fs/jffs2/compr_rubin.c
-+++ linux-2.6.23.17/fs/jffs2/compr_rubin.c
-@@ -384,7 +384,7 @@ static int jffs2_rubinmips_decompress(un
- void *model)
- {
- rubin_do_decompress(BIT_DIVIDER_MIPS, bits_mips, data_in, cpage_out, sourcelen, dstlen);
-- return 0;
-+ return 0;
- }
-
- static int jffs2_dynrubin_decompress(unsigned char *data_in,
-@@ -399,7 +399,7 @@ static int jffs2_dynrubin_decompress(uns
- bits[c] = data_in[c];
-
- rubin_do_decompress(256, bits, data_in+8, cpage_out, sourcelen-8, dstlen);
-- return 0;
-+ return 0;
- }
-
- static struct jffs2_compressor jffs2_rubinmips_comp = {
-Index: linux-2.6.23.17/fs/jffs2/compr_zlib.c
-===================================================================
---- linux-2.6.23.17.orig/fs/jffs2/compr_zlib.c
-+++ linux-2.6.23.17/fs/jffs2/compr_zlib.c
-@@ -181,7 +181,7 @@ static int jffs2_zlib_decompress(unsigne
- }
- zlib_inflateEnd(&inf_strm);
- mutex_unlock(&inflate_mutex);
-- return 0;
-+ return 0;
- }
-
- static struct jffs2_compressor jffs2_zlib_comp = {
-@@ -203,11 +203,11 @@ int __init jffs2_zlib_init(void)
-
- ret = alloc_workspaces();
- if (ret)
-- return ret;
-+ return ret;
-
- ret = jffs2_register_compressor(&jffs2_zlib_comp);
- if (ret)
-- free_workspaces();
-+ free_workspaces();
-
- return ret;
- }
-Index: linux-2.6.23.17/fs/jffs2/dir.c
-===================================================================
---- linux-2.6.23.17.orig/fs/jffs2/dir.c
-+++ linux-2.6.23.17/fs/jffs2/dir.c
-@@ -32,7 +32,7 @@ static int jffs2_mkdir (struct inode *,s
- static int jffs2_rmdir (struct inode *,struct dentry *);
- static int jffs2_mknod (struct inode *,struct dentry *,int,dev_t);
- static int jffs2_rename (struct inode *, struct dentry *,
-- struct inode *, struct dentry *);
-+ struct inode *, struct dentry *);
-
- const struct file_operations jffs2_dir_operations =
- {
-@@ -770,7 +770,7 @@ static int jffs2_mknod (struct inode *di
- }
-
- static int jffs2_rename (struct inode *old_dir_i, struct dentry *old_dentry,
-- struct inode *new_dir_i, struct dentry *new_dentry)
-+ struct inode *new_dir_i, struct dentry *new_dentry)
- {
- int ret;
- struct jffs2_sb_info *c = JFFS2_SB_INFO(old_dir_i->i_sb);
-Index: linux-2.6.23.17/fs/jffs2/erase.c
-===================================================================
---- linux-2.6.23.17.orig/fs/jffs2/erase.c
-+++ linux-2.6.23.17/fs/jffs2/erase.c
-@@ -38,8 +38,8 @@ static void jffs2_erase_block(struct jff
- #ifdef __ECOS
- ret = jffs2_flash_erase(c, jeb);
- if (!ret) {
-- jffs2_erase_succeeded(c, jeb);
-- return;
-+ jffs2_erase_succeeded(c, jeb);
-+ return;
- }
- bad_offset = jeb->offset;
- #else /* Linux */
-@@ -50,12 +50,14 @@ static void jffs2_erase_block(struct jff
- instr = kmalloc(sizeof(struct erase_info) + sizeof(struct erase_priv_struct), GFP_KERNEL);
- if (!instr) {
- printk(KERN_WARNING "kmalloc for struct erase_info in jffs2_erase_block failed. Refiling block for later\n");
-+ down(&c->erase_free_sem);
- spin_lock(&c->erase_completion_lock);
- list_move(&jeb->list, &c->erase_pending_list);
- c->erasing_size -= c->sector_size;
- c->dirty_size += c->sector_size;
- jeb->dirty_size = c->sector_size;
- spin_unlock(&c->erase_completion_lock);
-+ up(&c->erase_free_sem);
- return;
- }
-
-@@ -82,12 +84,14 @@ static void jffs2_erase_block(struct jff
- if (ret == -ENOMEM || ret == -EAGAIN) {
- /* Erase failed immediately. Refile it on the list */
- D1(printk(KERN_DEBUG "Erase at 0x%08x failed: %d. Refiling on erase_pending_list\n", jeb->offset, ret));
-+ down(&c->erase_free_sem);
- spin_lock(&c->erase_completion_lock);
- list_move(&jeb->list, &c->erase_pending_list);
- c->erasing_size -= c->sector_size;
- c->dirty_size += c->sector_size;
- jeb->dirty_size = c->sector_size;
- spin_unlock(&c->erase_completion_lock);
-+ up(&c->erase_free_sem);
- return;
- }
-
-@@ -114,6 +118,7 @@ void jffs2_erase_pending_blocks(struct j
- jeb = list_entry(c->erase_complete_list.next, struct jffs2_eraseblock, list);
- list_del(&jeb->list);
- spin_unlock(&c->erase_completion_lock);
-+ up(&c->erase_free_sem);
- jffs2_mark_erased_block(c, jeb);
-
- if (!--count) {
-@@ -134,6 +139,7 @@ void jffs2_erase_pending_blocks(struct j
- jffs2_free_jeb_node_refs(c, jeb);
- list_add(&jeb->list, &c->erasing_list);
- spin_unlock(&c->erase_completion_lock);
-+ up(&c->erase_free_sem);
-
- jffs2_erase_block(c, jeb);
-
-@@ -142,23 +148,25 @@ void jffs2_erase_pending_blocks(struct j
- }
-
- /* Be nice */
-- cond_resched();
-+ yield();
-+ down(&c->erase_free_sem);
- spin_lock(&c->erase_completion_lock);
- }
-
- spin_unlock(&c->erase_completion_lock);
-+ up(&c->erase_free_sem);
- done:
- D1(printk(KERN_DEBUG "jffs2_erase_pending_blocks completed\n"));
--
-- up(&c->erase_free_sem);
- }
-
- static void jffs2_erase_succeeded(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb)
- {
- D1(printk(KERN_DEBUG "Erase completed successfully at 0x%08x\n", jeb->offset));
-+ down(&c->erase_free_sem);
- spin_lock(&c->erase_completion_lock);
- list_move_tail(&jeb->list, &c->erase_complete_list);
- spin_unlock(&c->erase_completion_lock);
-+ up(&c->erase_free_sem);
- /* Ensure that kupdated calls us again to mark them clean */
- jffs2_erase_pending_trigger(c);
- }
-@@ -172,22 +180,26 @@ static void jffs2_erase_failed(struct jf
- failed too many times. */
- if (!jffs2_write_nand_badblock(c, jeb, bad_offset)) {
- /* We'd like to give this block another try. */
-+ down(&c->erase_free_sem);
- spin_lock(&c->erase_completion_lock);
- list_move(&jeb->list, &c->erase_pending_list);
- c->erasing_size -= c->sector_size;
- c->dirty_size += c->sector_size;
- jeb->dirty_size = c->sector_size;
- spin_unlock(&c->erase_completion_lock);
-+ up(&c->erase_free_sem);
- return;
- }
- }
-
-+ down(&c->erase_free_sem);
- spin_lock(&c->erase_completion_lock);
- c->erasing_size -= c->sector_size;
- c->bad_size += c->sector_size;
- list_move(&jeb->list, &c->bad_list);
- c->nr_erasing_blocks--;
- spin_unlock(&c->erase_completion_lock);
-+ up(&c->erase_free_sem);
- wake_up(&c->erase_wait);
- }
-
-@@ -317,6 +329,33 @@ static int jffs2_block_check_erase(struc
- size_t retlen;
- int ret = -EIO;
-
-+ if (c->mtd->point) {
-+ unsigned long *wordebuf;
-+
-+ ret = c->mtd->point(c->mtd, jeb->offset, c->sector_size, &retlen, (unsigned char **)&ebuf);
-+ if (ret) {
-+ D1(printk(KERN_DEBUG "MTD point failed %d\n", ret));
-+ goto do_flash_read;
-+ }
-+ if (retlen < c->sector_size) {
-+ /* Don't muck about if it won't let us point to the whole erase sector */
-+ D1(printk(KERN_DEBUG "MTD point returned len too short: 0x%zx\n", retlen));
-+ c->mtd->unpoint(c->mtd, ebuf, jeb->offset, c->sector_size);
-+ goto do_flash_read;
-+ }
-+ wordebuf = ebuf-sizeof(*wordebuf);
-+ retlen /= sizeof(*wordebuf);
-+ do {
-+ if (*++wordebuf != ~0)
-+ break;
-+ } while(--retlen);
-+ c->mtd->unpoint(c->mtd, ebuf, jeb->offset, c->sector_size);
-+ if (retlen)
-+ printk(KERN_WARNING "Newly-erased block contained word 0x%lx at offset 0x%08x\n",
-+ *wordebuf, jeb->offset + c->sector_size-retlen*sizeof(*wordebuf));
-+ return 0;
-+ }
-+ do_flash_read:
- ebuf = kmalloc(PAGE_SIZE, GFP_KERNEL);
- if (!ebuf) {
- printk(KERN_WARNING "Failed to allocate page buffer for verifying erase at 0x%08x. Refiling\n", jeb->offset);
-@@ -417,6 +456,7 @@ static void jffs2_mark_erased_block(stru
- jffs2_link_node_ref(c, jeb, jeb->offset | REF_NORMAL, c->cleanmarker_size, NULL);
- }
-
-+ down(&c->erase_free_sem);
- spin_lock(&c->erase_completion_lock);
- c->erasing_size -= c->sector_size;
- c->free_size += jeb->free_size;
-@@ -429,23 +469,28 @@ static void jffs2_mark_erased_block(stru
- c->nr_erasing_blocks--;
- c->nr_free_blocks++;
- spin_unlock(&c->erase_completion_lock);
-+ up(&c->erase_free_sem);
- wake_up(&c->erase_wait);
- return;
-
- filebad:
-+ down(&c->erase_free_sem);
- spin_lock(&c->erase_completion_lock);
- /* Stick it on a list (any list) so erase_failed can take it
- right off again. Silly, but shouldn't happen often. */
- list_add(&jeb->list, &c->erasing_list);
- spin_unlock(&c->erase_completion_lock);
-+ up(&c->erase_free_sem);
- jffs2_erase_failed(c, jeb, bad_offset);
- return;
-
- refile:
- /* Stick it back on the list from whence it came and come back later */
- jffs2_erase_pending_trigger(c);
-+ down(&c->erase_free_sem);
- spin_lock(&c->erase_completion_lock);
- list_add(&jeb->list, &c->erase_complete_list);
- spin_unlock(&c->erase_completion_lock);
-+ up(&c->erase_free_sem);
- return;
- }
-Index: linux-2.6.23.17/fs/jffs2/gc.c
-===================================================================
---- linux-2.6.23.17.orig/fs/jffs2/gc.c
-+++ linux-2.6.23.17/fs/jffs2/gc.c
-@@ -556,7 +556,7 @@ static int jffs2_garbage_collect_pristin
-
- node = kmalloc(rawlen, GFP_KERNEL);
- if (!node)
-- return -ENOMEM;
-+ return -ENOMEM;
-
- ret = jffs2_flash_read(c, ref_offset(raw), rawlen, &retlen, (char *)node);
- if (!ret && retlen != rawlen)
-@@ -624,7 +624,7 @@ static int jffs2_garbage_collect_pristin
-
- if (ret || (retlen != rawlen)) {
- printk(KERN_NOTICE "Write of %d bytes at 0x%08x failed. returned %d, retlen %zd\n",
-- rawlen, phys_ofs, ret, retlen);
-+ rawlen, phys_ofs, ret, retlen);
- if (retlen) {
- jffs2_add_physical_node_ref(c, phys_ofs | REF_OBSOLETE, rawlen, NULL);
- } else {
-Index: linux-2.6.23.17/fs/jffs2/jffs2_fs_sb.h
-===================================================================
---- linux-2.6.23.17.orig/fs/jffs2/jffs2_fs_sb.h
-+++ linux-2.6.23.17/fs/jffs2/jffs2_fs_sb.h
-@@ -106,6 +106,9 @@ struct jffs2_sb_info {
-
- uint32_t wbuf_pagesize; /* 0 for NOR and other flashes with no wbuf */
-
-+#ifdef CONFIG_JFFS2_FS_WBUF_VERIFY
-+ unsigned char *wbuf_verify; /* read-back buffer for verification */
-+#endif
- #ifdef CONFIG_JFFS2_FS_WRITEBUFFER
- unsigned char *wbuf; /* Write-behind buffer for NAND flash */
- uint32_t wbuf_ofs;
-Index: linux-2.6.23.17/fs/jffs2/nodelist.h
-===================================================================
---- linux-2.6.23.17.orig/fs/jffs2/nodelist.h
-+++ linux-2.6.23.17/fs/jffs2/nodelist.h
-@@ -127,7 +127,7 @@ static inline struct jffs2_inode_cache *
- return ((struct jffs2_inode_cache *)raw);
- }
-
-- /* flash_offset & 3 always has to be zero, because nodes are
-+ /* flash_offset & 3 always has to be zero, because nodes are
- always aligned at 4 bytes. So we have a couple of extra bits
- to play with, which indicate the node's status; see below: */
- #define REF_UNCHECKED 0 /* We haven't yet checked the CRC or built its inode */
-@@ -197,7 +197,7 @@ struct jffs2_inode_cache {
- #define RAWNODE_CLASS_XATTR_DATUM 1
- #define RAWNODE_CLASS_XATTR_REF 2
-
--#define INOCACHE_HASHSIZE 128
-+#define INOCACHE_HASHSIZE 1024
-
- #define write_ofs(c) ((c)->nextblock->offset + (c)->sector_size - (c)->nextblock->free_size)
-
-Index: linux-2.6.23.17/fs/jffs2/nodemgmt.c
-===================================================================
---- linux-2.6.23.17.orig/fs/jffs2/nodemgmt.c
-+++ linux-2.6.23.17/fs/jffs2/nodemgmt.c
-@@ -154,7 +154,7 @@ int jffs2_reserve_space_gc(struct jffs2_
- while(ret == -EAGAIN) {
- ret = jffs2_do_reserve_space(c, minsize, len, sumsize);
- if (ret) {
-- D1(printk(KERN_DEBUG "jffs2_reserve_space_gc: looping, ret is %d\n", ret));
-+ D1(printk(KERN_DEBUG "jffs2_reserve_space_gc: looping, ret is %d\n", ret));
- }
- }
- spin_unlock(&c->erase_completion_lock);
-@@ -423,7 +423,12 @@ struct jffs2_raw_node_ref *jffs2_add_phy
- even after refiling c->nextblock */
- if ((c->nextblock || ((ofs & 3) != REF_OBSOLETE))
- && (jeb != c->nextblock || (ofs & ~3) != jeb->offset + (c->sector_size - jeb->free_size))) {
-- printk(KERN_WARNING "argh. node added in wrong place\n");
-+ printk(KERN_WARNING "argh. node added in wrong place at 0x%08x(%d)\n", ofs & ~3, ofs & 3);
-+ if (c->nextblock)
-+ printk(KERN_WARNING "nextblock 0x%08x", c->nextblock->offset);
-+ else
-+ printk(KERN_WARNING "No nextblock");
-+ printk(", expected at %08x\n", jeb->offset + (c->sector_size - jeb->free_size));
- return ERR_PTR(-EINVAL);
- }
- #endif
-Index: linux-2.6.23.17/fs/jffs2/readinode.c
-===================================================================
---- linux-2.6.23.17.orig/fs/jffs2/readinode.c
-+++ linux-2.6.23.17/fs/jffs2/readinode.c
-@@ -211,7 +211,7 @@ static void jffs2_kill_tn(struct jffs2_s
- * ordering.
- *
- * Returns 0 if the node was handled (including marking it obsolete)
-- * < 0 an if error occurred
-+ * < 0 an if error occurred
- */
- static int jffs2_add_tn_to_tree(struct jffs2_sb_info *c,
- struct jffs2_readinode_info *rii,
-@@ -862,8 +862,8 @@ static inline int read_unknown(struct jf
- JFFS2_ERROR("REF_UNCHECKED but unknown node at %#08x\n",
- ref_offset(ref));
- JFFS2_ERROR("Node is {%04x,%04x,%08x,%08x}. Please report this error.\n",
-- je16_to_cpu(un->magic), je16_to_cpu(un->nodetype),
-- je32_to_cpu(un->totlen), je32_to_cpu(un->hdr_crc));
-+ je16_to_cpu(un->magic), je16_to_cpu(un->nodetype),
-+ je32_to_cpu(un->totlen), je32_to_cpu(un->hdr_crc));
- jffs2_mark_node_obsolete(c, ref);
- return 0;
- }
-Index: linux-2.6.23.17/fs/jffs2/scan.c
-===================================================================
---- linux-2.6.23.17.orig/fs/jffs2/scan.c
-+++ linux-2.6.23.17/fs/jffs2/scan.c
-@@ -877,7 +877,7 @@ scan_more:
- switch (je16_to_cpu(node->nodetype) & JFFS2_COMPAT_MASK) {
- case JFFS2_FEATURE_ROCOMPAT:
- printk(KERN_NOTICE "Read-only compatible feature node (0x%04x) found at offset 0x%08x\n", je16_to_cpu(node->nodetype), ofs);
-- c->flags |= JFFS2_SB_FLAG_RO;
-+ c->flags |= JFFS2_SB_FLAG_RO;
- if (!(jffs2_is_readonly(c)))
- return -EROFS;
- if ((err = jffs2_scan_dirty_space(c, jeb, PAD(je32_to_cpu(node->totlen)))))
-Index: linux-2.6.23.17/fs/jffs2/security.c
-===================================================================
---- linux-2.6.23.17.orig/fs/jffs2/security.c
-+++ linux-2.6.23.17/fs/jffs2/security.c
-@@ -38,9 +38,9 @@ int jffs2_init_security(struct inode *in
- }
- rc = do_jffs2_setxattr(inode, JFFS2_XPREFIX_SECURITY, name, value, len, 0);
-
-- kfree(name);
-- kfree(value);
-- return rc;
-+ kfree(name);
-+ kfree(value);
-+ return rc;
- }
-
- /* ---- XATTR Handler for "security.*" ----------------- */
-Index: linux-2.6.23.17/fs/jffs2/summary.c
-===================================================================
---- linux-2.6.23.17.orig/fs/jffs2/summary.c
-+++ linux-2.6.23.17/fs/jffs2/summary.c
-@@ -2,10 +2,10 @@
- * JFFS2 -- Journalling Flash File System, Version 2.
- *
- * Copyright © 2004 Ferenc Havasi <havasi@inf.u-szeged.hu>,
-- * Zoltan Sogor <weth@inf.u-szeged.hu>,
-- * Patrik Kluba <pajko@halom.u-szeged.hu>,
-- * University of Szeged, Hungary
-- * 2006 KaiGai Kohei <kaigai@ak.jp.nec.com>
-+ * Zoltan Sogor <weth@inf.u-szeged.hu>,
-+ * Patrik Kluba <pajko@halom.u-szeged.hu>,
-+ * University of Szeged, Hungary
-+ * 2006 KaiGai Kohei <kaigai@ak.jp.nec.com>
- *
- * For licensing information, see the file 'LICENCE' in this directory.
- *
-Index: linux-2.6.23.17/fs/jffs2/summary.h
-===================================================================
---- linux-2.6.23.17.orig/fs/jffs2/summary.h
-+++ linux-2.6.23.17/fs/jffs2/summary.h
-@@ -2,9 +2,9 @@
- * JFFS2 -- Journalling Flash File System, Version 2.
- *
- * Copyright © 2004 Ferenc Havasi <havasi@inf.u-szeged.hu>,
-- * Zoltan Sogor <weth@inf.u-szeged.hu>,
-- * Patrik Kluba <pajko@halom.u-szeged.hu>,
-- * University of Szeged, Hungary
-+ * Zoltan Sogor <weth@inf.u-szeged.hu>,
-+ * Patrik Kluba <pajko@halom.u-szeged.hu>,
-+ * University of Szeged, Hungary
- *
- * For licensing information, see the file 'LICENCE' in this directory.
- *
-Index: linux-2.6.23.17/fs/jffs2/wbuf.c
-===================================================================
---- linux-2.6.23.17.orig/fs/jffs2/wbuf.c
-+++ linux-2.6.23.17/fs/jffs2/wbuf.c
-@@ -220,6 +220,47 @@ static struct jffs2_raw_node_ref **jffs2
- return NULL;
- }
-
-+#ifdef CONFIG_JFFS2_FS_WBUF_VERIFY
-+static int jffs2_verify_write(struct jffs2_sb_info *c, unsigned char *buf,
-+ uint32_t ofs)
-+{
-+ int ret;
-+ size_t retlen;
-+ char *eccstr;
-+
-+ ret = c->mtd->read(c->mtd, ofs, c->wbuf_pagesize, &retlen, c->wbuf_verify);
-+ if (ret && ret != -EUCLEAN && ret != -EBADMSG) {
-+ printk(KERN_WARNING "jffs2_verify_write(): Read back of page at %08x failed: %d\n", c->wbuf_ofs, ret);
-+ return ret;
-+ } else if (retlen != c->wbuf_pagesize) {
-+ printk(KERN_WARNING "jffs2_verify_write(): Read back of page at %08x gave short read: %zd not %d.\n", ofs, retlen, c->wbuf_pagesize);
-+ return -EIO;
-+ }
-+ if (!memcmp(buf, c->wbuf_verify, c->wbuf_pagesize))
-+ return 0;
-+
-+ if (ret == -EUCLEAN)
-+ eccstr = "corrected";
-+ else if (ret == -EBADMSG)
-+ eccstr = "correction failed";
-+ else
-+ eccstr = "OK or unused";
-+
-+ printk(KERN_WARNING "Write verify error (ECC %s) at %08x. Wrote:\n",
-+ eccstr, c->wbuf_ofs);
-+ print_hex_dump(KERN_WARNING, "", DUMP_PREFIX_OFFSET, 16, 1,
-+ c->wbuf, c->wbuf_pagesize, 0);
-+
-+ printk(KERN_WARNING "Read back:\n");
-+ print_hex_dump(KERN_WARNING, "", DUMP_PREFIX_OFFSET, 16, 1,
-+ c->wbuf_verify, c->wbuf_pagesize, 0);
-+
-+ return -EIO;
-+}
-+#else
-+#define jffs2_verify_write(c,b,o) (0)
-+#endif
-+
- /* Recover from failure to write wbuf. Recover the nodes up to the
- * wbuf, not the one which we were starting to try to write. */
-
-@@ -380,7 +421,7 @@ static void jffs2_wbuf_recover(struct jf
- ret = c->mtd->write(c->mtd, ofs, towrite, &retlen,
- rewrite_buf);
-
-- if (ret || retlen != towrite) {
-+ if (ret || retlen != towrite || jffs2_verify_write(c, rewrite_buf, ofs)) {
- /* Argh. We tried. Really we did. */
- printk(KERN_CRIT "Recovery of wbuf failed due to a second write error\n");
- kfree(buf);
-@@ -587,15 +628,16 @@ static int __jffs2_flush_wbuf(struct jff
-
- ret = c->mtd->write(c->mtd, c->wbuf_ofs, c->wbuf_pagesize, &retlen, c->wbuf);
-
-- if (ret || retlen != c->wbuf_pagesize) {
-- if (ret)
-- printk(KERN_WARNING "jffs2_flush_wbuf(): Write failed with %d\n",ret);
-- else {
-- printk(KERN_WARNING "jffs2_flush_wbuf(): Write was short: %zd instead of %d\n",
-- retlen, c->wbuf_pagesize);
-- ret = -EIO;
-- }
--
-+ if (ret) {
-+ printk(KERN_WARNING "jffs2_flush_wbuf(): Write failed with %d\n", ret);
-+ goto wfail;
-+ } else if (retlen != c->wbuf_pagesize) {
-+ printk(KERN_WARNING "jffs2_flush_wbuf(): Write was short: %zd instead of %d\n",
-+ retlen, c->wbuf_pagesize);
-+ ret = -EIO;
-+ goto wfail;
-+ } else if ((ret = jffs2_verify_write(c, c->wbuf, c->wbuf_ofs))) {
-+ wfail:
- jffs2_wbuf_recover(c);
-
- return ret;
-@@ -966,8 +1008,8 @@ exit:
-
- #define NR_OOB_SCAN_PAGES 4
-
--/* For historical reasons we use only 12 bytes for OOB clean marker */
--#define OOB_CM_SIZE 12
-+/* For historical reasons we use only 8 bytes for OOB clean marker */
-+#define OOB_CM_SIZE 8
-
- static const struct jffs2_unknown_node oob_cleanmarker =
- {
-@@ -1021,8 +1063,8 @@ int jffs2_check_oob_empty(struct jffs2_s
- /*
- * Check for a valid cleanmarker.
- * Returns: 0 if a valid cleanmarker was found
-- * 1 if no cleanmarker was found
-- * negative error code if an error occurred
-+ * 1 if no cleanmarker was found
-+ * negative error code if an error occurred
- */
- int jffs2_check_nand_cleanmarker(struct jffs2_sb_info *c,
- struct jffs2_eraseblock *jeb)
-@@ -1138,11 +1180,22 @@ int jffs2_nand_flash_setup(struct jffs2_
- return -ENOMEM;
- }
-
-+#ifdef CONFIG_JFFS2_FS_WBUF_VERIFY
-+ c->wbuf_verify = kmalloc(c->wbuf_pagesize, GFP_KERNEL);
-+ if (!c->wbuf_verify) {
-+ kfree(c->oobbuf);
-+ kfree(c->wbuf);
-+ return -ENOMEM;
-+ }
-+#endif
- return 0;
- }
-
- void jffs2_nand_flash_cleanup(struct jffs2_sb_info *c)
- {
-+#ifdef CONFIG_JFFS2_FS_WBUF_VERIFY
-+ kfree(c->wbuf_verify);
-+#endif
- kfree(c->wbuf);
- kfree(c->oobbuf);
- }
-Index: linux-2.6.23.17/fs/jffs2/xattr.h
-===================================================================
---- linux-2.6.23.17.orig/fs/jffs2/xattr.h
-+++ linux-2.6.23.17/fs/jffs2/xattr.h
-@@ -75,7 +75,7 @@ extern void jffs2_build_xattr_subsystem(
- extern void jffs2_clear_xattr_subsystem(struct jffs2_sb_info *c);
-
- extern struct jffs2_xattr_datum *jffs2_setup_xattr_datum(struct jffs2_sb_info *c,
-- uint32_t xid, uint32_t version);
-+ uint32_t xid, uint32_t version);
-
- extern void jffs2_xattr_delete_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache *ic);
- extern void jffs2_xattr_free_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache *ic);
-Index: linux-2.6.23.17/fs/jffs2/xattr_user.c
-===================================================================
---- linux-2.6.23.17.orig/fs/jffs2/xattr_user.c
-+++ linux-2.6.23.17/fs/jffs2/xattr_user.c
-@@ -17,7 +17,7 @@
- #include "nodelist.h"
-
- static int jffs2_user_getxattr(struct inode *inode, const char *name,
-- void *buffer, size_t size)
-+ void *buffer, size_t size)
- {
- if (!strcmp(name, ""))
- return -EINVAL;
-@@ -25,7 +25,7 @@ static int jffs2_user_getxattr(struct in
- }
-
- static int jffs2_user_setxattr(struct inode *inode, const char *name, const void *buffer,
-- size_t size, int flags)
-+ size_t size, int flags)
- {
- if (!strcmp(name, ""))
- return -EINVAL;
-Index: linux-2.6.23.17/include/asm-i386/geode.h
-===================================================================
---- linux-2.6.23.17.orig/include/asm-i386/geode.h
-+++ linux-2.6.23.17/include/asm-i386/geode.h
-@@ -135,6 +135,55 @@ static inline void geode_gpio_event_pme(
- geode_gpio_setup_event(gpio, pair, 1);
- }
-
-+/* MFGPT */
-+
-+#define MFGPT_TIMER_ANY -1
-+
-+#define MFGPT_DOMAIN_WORKING 1
-+#define MFGPT_DOMAIN_STANDBY 2
-+#define MFGPT_DOMAIN_ANY (MFGPT_DOMAIN_WORKING | MFGPT_DOMAIN_STANDBY)
-+
-+#define MFGPT_CMP1 0
-+#define MFGPT_CMP2 1
-+
-+#define MFGPT_EVENT_IRQ 0
-+#define MFGPT_EVENT_NMI 1
-+#define MFGPT_EVENT_RESET 3
-+
-+#define MFGPT_REG_CMP1 0
-+#define MFGPT_REG_CMP2 2
-+#define MFGPT_REG_COUNTER 4
-+#define MFGPT_REG_SETUP 6
-+
-+#define MFGPT_SETUP_CNTEN (1 << 15)
-+#define MFGPT_SETUP_CMP2 (1 << 14)
-+#define MFGPT_SETUP_CMP1 (1 << 13)
-+#define MFGPT_SETUP_SETUP (1 << 12)
-+#define MFGPT_SETUP_STOPEN (1 << 11)
-+#define MFGPT_SETUP_EXTEN (1 << 10)
-+#define MFGPT_SETUP_REVEN (1 << 5)
-+#define MFGPT_SETUP_CLKSEL (1 << 4)
-+
-+static inline void geode_mfgpt_write(int timer, u16 reg, u16 value)
-+{
-+ u32 base = geode_get_dev_base(GEODE_DEV_MFGPT);
-+ outw(value, base + reg + (timer * 8));
-+}
-+
-+static inline u16 geode_mfgpt_read(int timer, u16 reg)
-+{
-+ u32 base = geode_get_dev_base(GEODE_DEV_MFGPT);
-+ return inw(base + reg + (timer * 8));
-+}
-+
-+extern int __init geode_mfgpt_detect(void);
-+extern int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable);
-+extern int geode_mfgpt_set_irq(int timer, int cmp, int irq, int enable);
-+extern int geode_mfgpt_alloc_timer(int timer, int domain, struct module *owner);
-+
-+#define geode_mfgpt_setup_irq(t,c,i) geode_mfgpt_set_irq((t),(c),(i),1)
-+#define geode_mfgpt_release_irq(t,c,i) geode_mfgpt_set_irq((t),(c),(i),0)
-+
- /* Specific geode tests */
-
- static inline int is_geode_gx(void)
-Index: linux-2.6.23.17/include/asm-i386/setup.h
-===================================================================
---- linux-2.6.23.17.orig/include/asm-i386/setup.h
-+++ linux-2.6.23.17/include/asm-i386/setup.h
-@@ -24,6 +24,7 @@
- #define OLD_CL_BASE_ADDR 0x90000
- #define OLD_CL_OFFSET 0x90022
- #define NEW_CL_POINTER 0x228 /* Relative to real mode data */
-+#define OFW_INFO_OFFSET 0xb0 /* Relative to real mode data */
-
- #ifndef __ASSEMBLY__
-
-Index: linux-2.6.23.17/include/linux/console.h
-===================================================================
---- linux-2.6.23.17.orig/include/linux/console.h
-+++ linux-2.6.23.17/include/linux/console.h
-@@ -121,14 +121,11 @@ extern void console_stop(struct console
- extern void console_start(struct console *);
- extern int is_console_locked(void);
-
--#ifndef CONFIG_DISABLE_CONSOLE_SUSPEND
-+extern int serial_console_suspend_enabled;
-+
- /* Suspend and resume console messages over PM events */
- extern void suspend_console(void);
- extern void resume_console(void);
--#else
--static inline void suspend_console(void) {}
--static inline void resume_console(void) {}
--#endif /* CONFIG_DISABLE_CONSOLE_SUSPEND */
-
- int mda_console_init(void);
- void prom_con_init(void);
-Index: linux-2.6.23.17/include/linux/fb.h
-===================================================================
---- linux-2.6.23.17.orig/include/linux/fb.h
-+++ linux-2.6.23.17/include/linux/fb.h
-@@ -664,6 +664,12 @@ struct fb_ops {
- /* restore saved state */
- void (*fb_restore_state)(struct fb_info *info);
-
-+ /* Shut down the graphics engine to save power */
-+ int (*fb_powerdown)(struct fb_info *info);
-+
-+ /* Power it back up */
-+ int (*fb_powerup)(struct fb_info *info);
-+
- /* get capability given var */
- void (*fb_get_caps)(struct fb_info *info, struct fb_blit_caps *caps,
- struct fb_var_screeninfo *var);
-@@ -943,6 +949,9 @@ extern int fb_get_color_depth(struct fb_
- extern int fb_get_options(char *name, char **option);
- extern int fb_new_modelist(struct fb_info *info);
-
-+extern int fb_powerdown(struct fb_info *info);
-+extern int fb_powerup(struct fb_info *info);
-+
- extern struct fb_info *registered_fb[FB_MAX];
- extern int num_registered_fb;
- extern struct class *fb_class;
-Index: linux-2.6.23.17/include/linux/mtd/onenand.h
-===================================================================
---- linux-2.6.23.17.orig/include/linux/mtd/onenand.h
-+++ linux-2.6.23.17/include/linux/mtd/onenand.h
-@@ -60,6 +60,7 @@ struct onenand_bufferram {
- * @erase_shift: [INTERN] number of address bits in a block
- * @page_shift: [INTERN] number of address bits in a page
- * @page_mask: [INTERN] a page per block mask
-+ * @writesize: [INTERN] a real page size
- * @bufferram_index: [INTERN] BufferRAM index
- * @bufferram: [INTERN] BufferRAM info
- * @readw: [REPLACEABLE] hardware specific function for read short
-@@ -100,6 +101,7 @@ struct onenand_chip {
- unsigned int erase_shift;
- unsigned int page_shift;
- unsigned int page_mask;
-+ unsigned int writesize;
-
- unsigned int bufferram_index;
- struct onenand_bufferram bufferram[MAX_BUFFERRAM];
-@@ -140,6 +142,8 @@ struct onenand_chip {
- #define ONENAND_NEXT_BUFFERRAM(this) (this->bufferram_index ^ 1)
- #define ONENAND_SET_NEXT_BUFFERRAM(this) (this->bufferram_index ^= 1)
- #define ONENAND_SET_PREV_BUFFERRAM(this) (this->bufferram_index ^= 1)
-+#define ONENAND_SET_BUFFERRAM0(this) (this->bufferram_index = 0)
-+#define ONENAND_SET_BUFFERRAM1(this) (this->bufferram_index = 1)
-
- #define ONENAND_GET_SYS_CFG1(this) \
- (this->read_word(this->base + ONENAND_REG_SYS_CFG1))
-@@ -149,6 +153,13 @@ struct onenand_chip {
- #define ONENAND_IS_DDP(this) \
- (this->device_id & ONENAND_DEVICE_IS_DDP)
-
-+#ifdef CONFIG_MTD_ONENAND_2X_PROGRAM
-+#define ONENAND_IS_2PLANE(this) \
-+ (this->options & ONENAND_HAS_2PLANE)
-+#else
-+#define ONENAND_IS_2PLANE(this) (0)
-+#endif
-+
- /* Check byte access in OneNAND */
- #define ONENAND_CHECK_BYTE_ACCESS(addr) (addr & 0x1)
-
-@@ -157,6 +168,7 @@ struct onenand_chip {
- */
- #define ONENAND_HAS_CONT_LOCK (0x0001)
- #define ONENAND_HAS_UNLOCK_ALL (0x0002)
-+#define ONENAND_HAS_2PLANE (0x0004)
- #define ONENAND_PAGEBUF_ALLOC (0x1000)
- #define ONENAND_OOBBUF_ALLOC (0x2000)
-
-Index: linux-2.6.23.17/include/linux/mtd/onenand_regs.h
-===================================================================
---- linux-2.6.23.17.orig/include/linux/mtd/onenand_regs.h
-+++ linux-2.6.23.17/include/linux/mtd/onenand_regs.h
-@@ -74,6 +74,8 @@
-
- #define ONENAND_DEVICE_DENSITY_512Mb (0x002)
- #define ONENAND_DEVICE_DENSITY_1Gb (0x003)
-+#define ONENAND_DEVICE_DENSITY_2Gb (0x004)
-+#define ONENAND_DEVICE_DENSITY_4Gb (0x005)
-
- /*
- * Version ID Register F002h (R)
-@@ -111,6 +113,8 @@
- #define ONENAND_CMD_READOOB (0x13)
- #define ONENAND_CMD_PROG (0x80)
- #define ONENAND_CMD_PROGOOB (0x1A)
-+#define ONENAND_CMD_2X_PROG (0x7D)
-+#define ONENAND_CMD_2X_CACHE_PROG (0x7F)
- #define ONENAND_CMD_UNLOCK (0x23)
- #define ONENAND_CMD_LOCK (0x2A)
- #define ONENAND_CMD_LOCK_TIGHT (0x2C)
-Index: linux-2.6.23.17/include/linux/vt_kern.h
-===================================================================
---- linux-2.6.23.17.orig/include/linux/vt_kern.h
-+++ linux-2.6.23.17/include/linux/vt_kern.h
-@@ -95,4 +95,23 @@ struct vt_spawn_console {
- };
- extern struct vt_spawn_console vt_spawn_con;
-
-+/* A notifier list for console events */
-+extern struct raw_notifier_head console_notifier_list;
-+
-+/* Called when the FG console switches to KD_TEXT mode */
-+#define CONSOLE_EVENT_SWITCH_TEXT 0x01
-+
-+/* Called when the FG console switches to KD_GRAPHICS mode */
-+#define CONSOLE_EVENT_SWITCH_GRAPHICS 0x02
-+
-+static inline int console_event_register(struct notifier_block *n)
-+{
-+ return raw_notifier_chain_register(&console_notifier_list, n);
-+}
-+
-+static inline int console_event_unregister(struct notifier_block *n)
-+{
-+ return raw_notifier_chain_unregister(&console_notifier_list, n);
-+}
-+
- #endif /* _VT_KERN_H */
-Index: linux-2.6.23.17/kernel/power/console.c
-===================================================================
---- linux-2.6.23.17.orig/kernel/power/console.c
-+++ linux-2.6.23.17/kernel/power/console.c
-@@ -9,7 +9,7 @@
- #include <linux/console.h>
- #include "power.h"
-
--#if defined(CONFIG_VT) && defined(CONFIG_VT_CONSOLE)
-+#if defined(CONFIG_VT) && defined(CONFIG_VT_CONSOLE) && !defined(CONFIG_DISABLE_SUSPEND_VT_SWITCH)
- #define SUSPEND_CONSOLE (MAX_NR_CONSOLES-1)
-
- static int orig_fgconsole, orig_kmsg;
+++ /dev/null
-Index: linux-2.6.23.17/include/sound/ac97_codec.h
-===================================================================
---- linux-2.6.23.17.orig/include/sound/ac97_codec.h
-+++ linux-2.6.23.17/include/sound/ac97_codec.h
-@@ -281,10 +281,12 @@
- /* specific - Analog Devices */
- #define AC97_AD_TEST 0x5a /* test register */
- #define AC97_AD_TEST2 0x5c /* undocumented test register 2 */
-+#define AC97_AD_HPFD_SHIFT 12 /* High Pass Filter Disable */
- #define AC97_AD_CODEC_CFG 0x70 /* codec configuration */
- #define AC97_AD_JACK_SPDIF 0x72 /* Jack Sense & S/PDIF */
- #define AC97_AD_SERIAL_CFG 0x74 /* Serial Configuration */
- #define AC97_AD_MISC 0x76 /* Misc Control Bits */
-+#define AC97_AD_VREFD_SHIFT 2 /* V_REFOUT Disable (AD1888) */
-
- /* specific - Cirrus Logic */
- #define AC97_CSR_ACMODE 0x5e /* AC Mode Register */
-Index: linux-2.6.23.17/sound/pci/ac97/ac97_codec.c
-===================================================================
---- linux-2.6.23.17.orig/sound/pci/ac97/ac97_codec.c
-+++ linux-2.6.23.17/sound/pci/ac97/ac97_codec.c
-@@ -49,7 +49,7 @@ module_param(enable_loopback, bool, 0444
- MODULE_PARM_DESC(enable_loopback, "Enable AC97 ADC/DAC Loopback Control");
-
- #ifdef CONFIG_SND_AC97_POWER_SAVE
--static int power_save;
-+static int power_save = 1;
- module_param(power_save, bool, 0644);
- MODULE_PARM_DESC(power_save, "Enable AC97 power-saving control");
- #endif
-Index: linux-2.6.23.17/sound/pci/ac97/ac97_patch.c
-===================================================================
---- linux-2.6.23.17.orig/sound/pci/ac97/ac97_patch.c
-+++ linux-2.6.23.17/sound/pci/ac97/ac97_patch.c
-@@ -1973,8 +1973,9 @@ static const struct snd_kcontrol_new snd
- .get = snd_ac97_ad1888_lohpsel_get,
- .put = snd_ac97_ad1888_lohpsel_put
- },
-- AC97_SINGLE("V_REFOUT Enable", AC97_AD_MISC, 2, 1, 1),
-- AC97_SINGLE("High Pass Filter Enable", AC97_AD_TEST2, 12, 1, 1),
-+ AC97_SINGLE("V_REFOUT Enable", AC97_AD_MISC, AC97_AD_VREFD_SHIFT, 1, 1),
-+ AC97_SINGLE("High Pass Filter Enable", AC97_AD_TEST2,
-+ AC97_AD_HPFD_SHIFT, 1, 1),
- AC97_SINGLE("Spread Front to Surround and Center/LFE", AC97_AD_MISC, 7, 1, 0),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-Index: linux-2.6.23.17/sound/pci/cs5535audio/Makefile
-===================================================================
---- linux-2.6.23.17.orig/sound/pci/cs5535audio/Makefile
-+++ linux-2.6.23.17/sound/pci/cs5535audio/Makefile
-@@ -8,5 +8,9 @@ ifeq ($(CONFIG_PM),y)
- snd-cs5535audio-objs += cs5535audio_pm.o
- endif
-
-+ifdef CONFIG_OLPC
-+snd-cs5535audio-objs += cs5535audio_olpc.o
-+endif
-+
- # Toplevel Module Dependency
- obj-$(CONFIG_SND_CS5535AUDIO) += snd-cs5535audio.o
-Index: linux-2.6.23.17/sound/pci/cs5535audio/cs5535audio.c
-===================================================================
---- linux-2.6.23.17.orig/sound/pci/cs5535audio/cs5535audio.c
-+++ linux-2.6.23.17/sound/pci/cs5535audio/cs5535audio.c
-@@ -145,7 +145,7 @@ static unsigned short snd_cs5535audio_ac
- return snd_cs5535audio_codec_read(cs5535au, reg);
- }
-
--static int snd_cs5535audio_mixer(struct cs5535audio *cs5535au)
-+static int __devinit snd_cs5535audio_mixer(struct cs5535audio *cs5535au)
- {
- struct snd_card *card = cs5535au->card;
- struct snd_ac97_bus *pbus;
-@@ -160,10 +160,14 @@ static int snd_cs5535audio_mixer(struct
- return err;
-
- memset(&ac97, 0, sizeof(ac97));
-- ac97.scaps = AC97_SCAP_AUDIO|AC97_SCAP_SKIP_MODEM;
-+ ac97.scaps = AC97_SCAP_AUDIO | AC97_SCAP_SKIP_MODEM
-+ | AC97_SCAP_POWER_SAVE;
- ac97.private_data = cs5535au;
- ac97.pci = cs5535au->pci;
-
-+ /* olpc_prequirks is dummied out if not olpc */
-+ olpc_prequirks(card, &ac97);
-+
- if ((err = snd_ac97_mixer(pbus, &ac97, &cs5535au->ac97)) < 0) {
- snd_printk(KERN_ERR "mixer failed\n");
- return err;
-@@ -171,6 +175,12 @@ static int snd_cs5535audio_mixer(struct
-
- snd_ac97_tune_hardware(cs5535au->ac97, ac97_quirks, ac97_quirk);
-
-+ /* olpc_quirks is dummied out if not olpc */
-+ if (( err = olpc_quirks(card, cs5535au->ac97)) < 0) {
-+ snd_printk(KERN_ERR "olpc quirks failed\n");
-+ return err;
-+ }
-+
- return 0;
- }
-
-@@ -206,7 +216,6 @@ static void process_bm1_irq(struct cs553
- static irqreturn_t snd_cs5535audio_interrupt(int irq, void *dev_id)
- {
- u16 acc_irq_stat;
-- u8 bm_stat;
- unsigned char count;
- struct cs5535audio *cs5535au = dev_id;
-
-@@ -217,7 +226,7 @@ static irqreturn_t snd_cs5535audio_inter
-
- if (!acc_irq_stat)
- return IRQ_NONE;
-- for (count = 0; count < 10; count++) {
-+ for (count = 0; count < 4; count++) {
- if (acc_irq_stat & (1 << count)) {
- switch (count) {
- case IRQ_STS:
-@@ -232,26 +241,9 @@ static irqreturn_t snd_cs5535audio_inter
- case BM1_IRQ_STS:
- process_bm1_irq(cs5535au);
- break;
-- case BM2_IRQ_STS:
-- bm_stat = cs_readb(cs5535au, ACC_BM2_STATUS);
-- break;
-- case BM3_IRQ_STS:
-- bm_stat = cs_readb(cs5535au, ACC_BM3_STATUS);
-- break;
-- case BM4_IRQ_STS:
-- bm_stat = cs_readb(cs5535au, ACC_BM4_STATUS);
-- break;
-- case BM5_IRQ_STS:
-- bm_stat = cs_readb(cs5535au, ACC_BM5_STATUS);
-- break;
-- case BM6_IRQ_STS:
-- bm_stat = cs_readb(cs5535au, ACC_BM6_STATUS);
-- break;
-- case BM7_IRQ_STS:
-- bm_stat = cs_readb(cs5535au, ACC_BM7_STATUS);
-- break;
- default:
-- snd_printk(KERN_ERR "Unexpected irq src\n");
-+ snd_printk(KERN_ERR "Unexpected irq src: "
-+ "0x%x\n", acc_irq_stat);
- break;
- }
- }
-Index: linux-2.6.23.17/sound/pci/cs5535audio/cs5535audio.h
-===================================================================
---- linux-2.6.23.17.orig/sound/pci/cs5535audio/cs5535audio.h
-+++ linux-2.6.23.17/sound/pci/cs5535audio/cs5535audio.h
-@@ -16,57 +16,28 @@
- #define ACC_IRQ_STATUS 0x12
- #define ACC_BM0_CMD 0x20
- #define ACC_BM1_CMD 0x28
--#define ACC_BM2_CMD 0x30
--#define ACC_BM3_CMD 0x38
--#define ACC_BM4_CMD 0x40
--#define ACC_BM5_CMD 0x48
--#define ACC_BM6_CMD 0x50
--#define ACC_BM7_CMD 0x58
- #define ACC_BM0_PRD 0x24
- #define ACC_BM1_PRD 0x2C
--#define ACC_BM2_PRD 0x34
--#define ACC_BM3_PRD 0x3C
--#define ACC_BM4_PRD 0x44
--#define ACC_BM5_PRD 0x4C
--#define ACC_BM6_PRD 0x54
--#define ACC_BM7_PRD 0x5C
- #define ACC_BM0_STATUS 0x21
- #define ACC_BM1_STATUS 0x29
--#define ACC_BM2_STATUS 0x31
--#define ACC_BM3_STATUS 0x39
--#define ACC_BM4_STATUS 0x41
--#define ACC_BM5_STATUS 0x49
--#define ACC_BM6_STATUS 0x51
--#define ACC_BM7_STATUS 0x59
- #define ACC_BM0_PNTR 0x60
- #define ACC_BM1_PNTR 0x64
--#define ACC_BM2_PNTR 0x68
--#define ACC_BM3_PNTR 0x6C
--#define ACC_BM4_PNTR 0x70
--#define ACC_BM5_PNTR 0x74
--#define ACC_BM6_PNTR 0x78
--#define ACC_BM7_PNTR 0x7C
-+
- /* acc_codec bar0 reg bits */
- /* ACC_IRQ_STATUS */
- #define IRQ_STS 0
- #define WU_IRQ_STS 1
- #define BM0_IRQ_STS 2
- #define BM1_IRQ_STS 3
--#define BM2_IRQ_STS 4
--#define BM3_IRQ_STS 5
--#define BM4_IRQ_STS 6
--#define BM5_IRQ_STS 7
--#define BM6_IRQ_STS 8
--#define BM7_IRQ_STS 9
- /* ACC_BMX_STATUS */
- #define EOP (1<<0)
- #define BM_EOP_ERR (1<<1)
- /* ACC_BMX_CTL */
--#define BM_CTL_EN 0x00000001
--#define BM_CTL_PAUSE 0x00000011
--#define BM_CTL_DIS 0x00000000
--#define BM_CTL_BYTE_ORD_LE 0x00000000
--#define BM_CTL_BYTE_ORD_BE 0x00000100
-+#define BM_CTL_EN 0x01
-+#define BM_CTL_PAUSE 0x03
-+#define BM_CTL_DIS 0x00
-+#define BM_CTL_BYTE_ORD_LE 0x00
-+#define BM_CTL_BYTE_ORD_BE 0x04
- /* cs5535 specific ac97 codec register defines */
- #define CMD_MASK 0xFF00FFFF
- #define CMD_NEW 0x00010000
-@@ -106,8 +77,8 @@ struct cs5535audio_dma {
- struct snd_pcm_substream *substream;
- unsigned int buf_addr, buf_bytes;
- unsigned int period_bytes, periods;
-- int suspended;
- u32 saved_prd;
-+ int pcm_open_flag;
- };
-
- struct cs5535audio {
-@@ -123,8 +94,21 @@ struct cs5535audio {
- struct cs5535audio_dma dmas[NUM_CS5535AUDIO_DMAS];
- };
-
-+#ifdef CONFIG_PM
- int snd_cs5535audio_suspend(struct pci_dev *pci, pm_message_t state);
- int snd_cs5535audio_resume(struct pci_dev *pci);
-+#endif
-+
-+#ifdef CONFIG_OLPC
-+void olpc_prequirks(struct snd_card *card, struct snd_ac97_template *ac97) __devinit;
-+int olpc_quirks(struct snd_card *card, struct snd_ac97 *ac97) __devinit;
-+int olpc_ai_enable(struct snd_ac97 *ac97, u8 val);
-+#else
-+#define olpc_prequirks(arg,arg2) do {} while (0)
-+#define olpc_quirks(arg,arg2) (0)
-+#define olpc_ai_enable(a, v) (0)
-+#endif
-+
- int __devinit snd_cs5535audio_pcm(struct cs5535audio *cs5535audio);
-
- #endif /* __SOUND_CS5535AUDIO_H */
-Index: linux-2.6.23.17/sound/pci/cs5535audio/cs5535audio_pcm.c
-===================================================================
---- linux-2.6.23.17.orig/sound/pci/cs5535audio/cs5535audio_pcm.c
-+++ linux-2.6.23.17/sound/pci/cs5535audio/cs5535audio_pcm.c
-@@ -164,6 +164,7 @@ static int cs5535audio_build_dma_packets
- jmpprd_addr = cpu_to_le32(lastdesc->addr +
- (sizeof(struct cs5535audio_dma_desc)*periods));
-
-+ dma->substream = substream;
- dma->period_bytes = period_bytes;
- dma->periods = periods;
- spin_lock_irq(&cs5535au->reg_lock);
-@@ -241,6 +242,7 @@ static void cs5535audio_clear_dma_packet
- {
- snd_dma_free_pages(&dma->desc_buf);
- dma->desc_buf.area = NULL;
-+ dma->substream = NULL;
- }
-
- static int snd_cs5535audio_hw_params(struct snd_pcm_substream *substream,
-@@ -260,6 +262,9 @@ static int snd_cs5535audio_hw_params(str
- err = cs5535audio_build_dma_packets(cs5535au, dma, substream,
- params_periods(hw_params),
- params_period_bytes(hw_params));
-+ if (!err)
-+ dma->pcm_open_flag = 1;
-+
- return err;
- }
-
-@@ -268,6 +273,15 @@ static int snd_cs5535audio_hw_free(struc
- struct cs5535audio *cs5535au = snd_pcm_substream_chip(substream);
- struct cs5535audio_dma *dma = substream->runtime->private_data;
-
-+ if (dma->pcm_open_flag) {
-+ if (substream == cs5535au->playback_substream)
-+ snd_ac97_update_power(cs5535au->ac97,
-+ AC97_PCM_FRONT_DAC_RATE, 0);
-+ else
-+ snd_ac97_update_power(cs5535au->ac97,
-+ AC97_PCM_LR_ADC_RATE, 0);
-+ dma->pcm_open_flag = 0;
-+ }
- cs5535audio_clear_dma_packets(cs5535au, dma, substream);
- return snd_pcm_lib_free_pages(substream);
- }
-@@ -298,14 +312,12 @@ static int snd_cs5535audio_trigger(struc
- break;
- case SNDRV_PCM_TRIGGER_RESUME:
- dma->ops->enable_dma(cs5535au);
-- dma->suspended = 0;
- break;
- case SNDRV_PCM_TRIGGER_STOP:
- dma->ops->disable_dma(cs5535au);
- break;
- case SNDRV_PCM_TRIGGER_SUSPEND:
- dma->ops->disable_dma(cs5535au);
-- dma->suspended = 1;
- break;
- default:
- snd_printk(KERN_ERR "unhandled trigger\n");
-@@ -344,6 +356,7 @@ static int snd_cs5535audio_capture_open(
- int err;
- struct cs5535audio *cs5535au = snd_pcm_substream_chip(substream);
- struct snd_pcm_runtime *runtime = substream->runtime;
-+ struct snd_ac97 *ac97 = cs5535au->ac97;
-
- runtime->hw = snd_cs5535audio_capture;
- cs5535au->capture_substream = substream;
-@@ -352,11 +365,29 @@ static int snd_cs5535audio_capture_open(
- if ((err = snd_pcm_hw_constraint_integer(runtime,
- SNDRV_PCM_HW_PARAM_PERIODS)) < 0)
- return err;
-- return 0;
-+
-+#ifdef CONFIG_OLPC
-+ /* Disable Analog Input */
-+ olpc_ai_enable(ac97, 0);
-+ /* Enable V_ref bias while recording. */
-+ snd_ac97_update_bits(ac97, AC97_AD_MISC, 1<<AC97_AD_VREFD_SHIFT, 0);
-+#endif
-+ return err;
- }
-
- static int snd_cs5535audio_capture_close(struct snd_pcm_substream *substream)
- {
-+#ifdef CONFIG_OLPC
-+ struct cs5535audio *cs5535au = snd_pcm_substream_chip(substream);
-+ struct snd_ac97 *ac97 = cs5535au->ac97;
-+
-+ /* Disable Analog Input */
-+ olpc_ai_enable(ac97, 0);
-+ /* Disable V_ref bias. */
-+ snd_ac97_update_bits(ac97, AC97_AD_MISC, 1<<AC97_AD_VREFD_SHIFT,
-+ 1<<AC97_AD_VREFD_SHIFT);
-+#endif
-+
- return 0;
- }
-
-Index: linux-2.6.23.17/sound/pci/cs5535audio/cs5535audio_pm.c
-===================================================================
---- linux-2.6.23.17.orig/sound/pci/cs5535audio/cs5535audio_pm.c
-+++ linux-2.6.23.17/sound/pci/cs5535audio/cs5535audio_pm.c
-@@ -64,18 +64,21 @@ int snd_cs5535audio_suspend(struct pci_d
- int i;
-
- snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
-+ snd_pcm_suspend_all(cs5535au->pcm);
-+ snd_ac97_suspend(cs5535au->ac97);
- for (i = 0; i < NUM_CS5535AUDIO_DMAS; i++) {
- struct cs5535audio_dma *dma = &cs5535au->dmas[i];
-- if (dma && dma->substream && !dma->suspended)
-+ if (dma && dma->substream)
- dma->saved_prd = dma->ops->read_prd(cs5535au);
- }
-- snd_pcm_suspend_all(cs5535au->pcm);
-- snd_ac97_suspend(cs5535au->ac97);
- /* save important regs, then disable aclink in hw */
- snd_cs5535audio_stop_hardware(cs5535au);
-
-+ if (pci_save_state(pci)) {
-+ printk(KERN_ERR "cs5535audio: pci_save_state failed!\n");
-+ return -EIO;
-+ }
- pci_disable_device(pci);
-- pci_save_state(pci);
- pci_set_power_state(pci, pci_choose_state(pci, state));
- return 0;
- }
-@@ -89,7 +92,12 @@ int snd_cs5535audio_resume(struct pci_de
- int i;
-
- pci_set_power_state(pci, PCI_D0);
-- pci_restore_state(pci);
-+ if (pci_restore_state(pci) < 0) {
-+ printk(KERN_ERR "cs5535audio: pci_restore_state failed, "
-+ "disabling device\n");
-+ snd_card_disconnect(card);
-+ return -EIO;
-+ }
- if (pci_enable_device(pci) < 0) {
- printk(KERN_ERR "cs5535audio: pci_enable_device failed, "
- "disabling device\n");
-@@ -112,17 +120,17 @@ int snd_cs5535audio_resume(struct pci_de
- if (!timeout)
- snd_printk(KERN_ERR "Failure getting AC Link ready\n");
-
-- /* we depend on ac97 to perform the codec power up */
-- snd_ac97_resume(cs5535au->ac97);
- /* set up rate regs, dma. actual initiation is done in trig */
- for (i = 0; i < NUM_CS5535AUDIO_DMAS; i++) {
- struct cs5535audio_dma *dma = &cs5535au->dmas[i];
-- if (dma && dma->substream && dma->suspended) {
-+ if (dma && dma->substream) {
- dma->substream->ops->prepare(dma->substream);
- dma->ops->setup_prd(cs5535au, dma->saved_prd);
- }
- }
--
-+
-+ /* we depend on ac97 to perform the codec power up */
-+ snd_ac97_resume(cs5535au->ac97);
- snd_power_change_state(card, SNDRV_CTL_POWER_D0);
-
- return 0;
+++ /dev/null
-Index: linux-2.6.23.17/include/linux/i2c-id.h
-===================================================================
---- linux-2.6.23.17.orig/include/linux/i2c-id.h
-+++ linux-2.6.23.17/include/linux/i2c-id.h
-@@ -119,6 +119,7 @@
- #define I2C_DRIVERID_WM8750 90 /* Wolfson WM8750 audio codec */
- #define I2C_DRIVERID_WM8753 91 /* Wolfson WM8753 audio codec */
- #define I2C_DRIVERID_LM4857 92 /* LM4857 Audio Amplifier */
-+#define I2C_DRIVERID_DCON 93
-
- #define I2C_DRIVERID_I2CDEV 900
- #define I2C_DRIVERID_ARP 902 /* SMBus ARP Client */
+++ /dev/null
-Index: linux-2.6.23.17/drivers/mtd/devices/block2mtd.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/mtd/devices/block2mtd.c
-+++ linux-2.6.23.17/drivers/mtd/devices/block2mtd.c
-@@ -20,6 +20,8 @@
- #include <linux/buffer_head.h>
- #include <linux/mutex.h>
- #include <linux/mount.h>
-+#include <linux/list.h>
-+#include <linux/delay.h>
-
- #define VERSION "$Revision: 1.30 $"
-
-@@ -27,6 +29,12 @@
- #define ERROR(fmt, args...) printk(KERN_ERR "block2mtd: " fmt "\n" , ## args)
- #define INFO(fmt, args...) printk(KERN_INFO "block2mtd: " fmt "\n" , ## args)
-
-+struct retry {
-+ struct list_head list;
-+ const char *val;
-+};
-+
-+static LIST_HEAD(retry_list);
-
- /* Info for the block device */
- struct block2mtd_dev {
-@@ -38,10 +46,36 @@ struct block2mtd_dev {
- char devname[0];
- };
-
-+static int block2mtd_setup2(const char *val);
-
- /* Static info about the MTD, used in cleanup_module */
- static LIST_HEAD(blkmtd_device_list);
-
-+static int add_retry(const char *val)
-+{
-+ struct retry *r = kmalloc(sizeof(struct retry), GFP_KERNEL);
-+
-+ INIT_LIST_HEAD(&r->list);
-+ r->val = val;
-+ list_add(&r->list, &retry_list);
-+
-+ return 0;
-+}
-+
-+static int __init process_retries(void)
-+{
-+ struct list_head *p, *tmp;
-+
-+ list_for_each_safe(p, tmp, &retry_list) {
-+ struct retry *r = list_entry(p, struct retry, list);
-+ block2mtd_setup2(r->val);
-+ msleep(100);
-+ list_del(p);
-+ kfree(r);
-+ }
-+ return 0;
-+}
-+rootfs_initcall(process_retries);
-
- static struct page *page_read(struct address_space *mapping, int index)
- {
-@@ -518,7 +552,10 @@ static int block2mtd_setup2(const char *
- if (token[2] && (strlen(token[2]) + 1 > 80))
- parse_err("mtd device name too long");
-
-- add_device(name, erase_size, token[2]);
-+ if (add_device(name, erase_size, token[2]) == NULL) {
-+ add_retry(val);
-+ return 0;
-+ }
-
- return 0;
- }
-@@ -534,8 +571,11 @@ static int block2mtd_setup(const char *v
- and block2mtd_init() has already been called,
- we can parse the argument now. */
-
-- if (block2mtd_init_called)
-+ if (block2mtd_init_called) {
-+ /* if the call failed (e.g. because the device does not exist yet)
-+ * then try again just before attempting to mount the rootfs */
- return block2mtd_setup2(val);
-+ }
-
- /* During early boot stage, we only save the parameters
- here. We must parse them later: if the param passed
-Index: linux-2.6.23.17/init/do_mounts.c
-===================================================================
---- linux-2.6.23.17.orig/init/do_mounts.c
-+++ linux-2.6.23.17/init/do_mounts.c
-@@ -241,16 +241,8 @@ static int __init fs_names_setup(char *s
- return 1;
- }
-
--static unsigned int __initdata root_delay;
--static int __init root_delay_setup(char *str)
--{
-- root_delay = simple_strtoul(str, NULL, 0);
-- return 1;
--}
--
- __setup("rootflags=", root_data_setup);
- __setup("rootfstype=", fs_names_setup);
--__setup("rootdelay=", root_delay_setup);
-
- static void __init get_fs_names(char *page)
- {
-@@ -426,18 +418,6 @@ void __init prepare_namespace(void)
- {
- int is_floppy;
-
-- if (root_delay) {
-- printk(KERN_INFO "Waiting %dsec before mounting root device...\n",
-- root_delay);
-- ssleep(root_delay);
-- }
--
-- /* wait for the known devices to complete their probing */
-- while (driver_probe_done() != 0)
-- msleep(100);
--
-- md_run_setup();
--
- if (saved_root_name[0]) {
- root_device_name = saved_root_name;
- if (!strncmp(root_device_name, "mtd", 3)) {
-Index: linux-2.6.23.17/init/main.c
-===================================================================
---- linux-2.6.23.17.orig/init/main.c
-+++ linux-2.6.23.17/init/main.c
-@@ -65,6 +65,7 @@
- #ifdef CONFIG_X86_LOCAL_APIC
- #include <asm/smp.h>
- #endif
-+#include "do_mounts.h"
-
- /*
- * This is one of the first .c files built. Error out early if we have compiler
-@@ -662,13 +663,14 @@ static int __init initcall_debug_setup(c
- __setup("initcall_debug", initcall_debug_setup);
-
- extern initcall_t __initcall_start[], __initcall_end[];
-+extern initcall_t __root_initcall_start[], __root_initcall_end[];
-
--static void __init do_initcalls(void)
-+static void __init do_initcalls(initcall_t *start, initcall_t *end)
- {
- initcall_t *call;
- int count = preempt_count();
-
-- for (call = __initcall_start; call < __initcall_end; call++) {
-+ for (call = start; call < end; call++) {
- ktime_t t0, t1, delta;
- char *msg = NULL;
- char msgbuf[40];
-@@ -737,7 +739,7 @@ static void __init do_basic_setup(void)
- usermodehelper_init();
- driver_init();
- init_irq_proc();
-- do_initcalls();
-+ do_initcalls(__initcall_start, __initcall_end);
- }
-
- static int __initdata nosoftlockup;
-@@ -810,6 +812,14 @@ static int noinline init_post(void)
- panic("No init found. Try passing init= option to kernel.");
- }
-
-+static unsigned int __initdata root_delay;
-+static int __init root_delay_setup(char *str)
-+{
-+ root_delay = simple_strtoul(str, NULL, 0);
-+ return 1;
-+}
-+__setup("rootdelay=", root_delay_setup);
-+
- static int __init kernel_init(void * unused)
- {
- lock_kernel();
-@@ -851,6 +861,17 @@ static int __init kernel_init(void * unu
-
- if (sys_access((const char __user *) ramdisk_execute_command, 0) != 0) {
- ramdisk_execute_command = NULL;
-+ if (root_delay) {
-+ printk(KERN_INFO "Waiting %dsec before mounting root device...\n",
-+ root_delay);
-+ ssleep(root_delay);
-+ }
-+ /* wait for the known devices to complete their probing */
-+ while (driver_probe_done() != 0)
-+ msleep(100);
-+ md_run_setup();
-+ do_initcalls(__root_initcall_start, __root_initcall_end);
-+
- prepare_namespace();
- }
-
-Index: linux-2.6.23.17/arch/i386/kernel/vmlinux.lds.S
-===================================================================
---- linux-2.6.23.17.orig/arch/i386/kernel/vmlinux.lds.S
-+++ linux-2.6.23.17/arch/i386/kernel/vmlinux.lds.S
-@@ -146,6 +146,11 @@ SECTIONS
- INITCALLS
- __initcall_end = .;
- }
-+ .root_initcall.init : AT(ADDR(.root_initcall.init) - LOAD_OFFSET) {
-+ __root_initcall_start = .;
-+ INITCALLS_ROOT
-+ __root_initcall_end = .;
-+ }
- .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
- __con_initcall_start = .;
- *(.con_initcall.init)
-Index: linux-2.6.23.17/include/asm-generic/vmlinux.lds.h
-===================================================================
---- linux-2.6.23.17.orig/include/asm-generic/vmlinux.lds.h
-+++ linux-2.6.23.17/include/asm-generic/vmlinux.lds.h
-@@ -243,12 +243,14 @@
- *(.initcall4s.init) \
- *(.initcall5.init) \
- *(.initcall5s.init) \
-- *(.initcallrootfs.init) \
- *(.initcall6.init) \
- *(.initcall6s.init) \
- *(.initcall7.init) \
- *(.initcall7s.init)
-
-+#define INITCALLS_ROOT \
-+ *(.initcallrootfs.init)
-+
- #define PERCPU(align) \
- . = ALIGN(align); \
- __per_cpu_start = .; \
projects / openwrt / staging / hauke.git / commitdiff