#define UBNT_LS_SR71_GPIO_LED_D27 6
#define UBNT_LS_SR71_GPIO_LED_D28 7
+#define UBNT_BULLET_M_GPIO_LED_L1 0
+#define UBNT_BULLET_M_GPIO_LED_L2 1
+#define UBNT_BULLET_M_GPIO_LED_L3 11
+#define UBNT_BULLET_M_GPIO_LED_L4 7
+
#define UBNT_BUTTONS_POLL_INTERVAL 20
static struct spi_board_info ubnt_spi_info[] = {
}
};
+static struct gpio_led ubnt_bullet_m_leds_gpio[] __initdata = {
+ {
+ .name = "ubnt:red:link1",
+ .gpio = UBNT_BULLET_M_GPIO_LED_L1,
+ .active_low = 0,
+ }, {
+ .name = "ubnt:orange:link2",
+ .gpio = UBNT_BULLET_M_GPIO_LED_L2,
+ .active_low = 0,
+ }, {
+ .name = "ubnt:green:link3",
+ .gpio = UBNT_BULLET_M_GPIO_LED_L3,
+ .active_low = 0,
+ }, {
+ .name = "ubnt:green:link4",
+ .gpio = UBNT_BULLET_M_GPIO_LED_L4,
+ .active_low = 0,
+ }
+};
+
static struct gpio_button ubnt_gpio_buttons[] __initdata = {
{
.desc = "sw4",
}
MIPS_MACHINE(AR71XX_MACH_UBNT_LSSR71, "Ubiquiti LS-SR71", ubnt_lssr71_setup);
+
+static void __init ubnt_bullet_m_setup(void)
+{
+ ar71xx_add_device_spi(NULL, ubnt_spi_info,
+ ARRAY_SIZE(ubnt_spi_info));
+
+ ar71xx_add_device_mdio(~0);
+
+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ar71xx_eth0_data.phy_mask = 0;
+
+ ar71xx_eth0_data.speed = SPEED_100;
+ ar71xx_eth0_data.duplex = DUPLEX_FULL;
+
+ ar71xx_add_device_eth(0);
+
+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ubnt_bullet_m_leds_gpio),
+ ubnt_bullet_m_leds_gpio);
+}
+
+MIPS_MACHINE(AR71XX_MACH_UBNT_BULLET_M, "Ubiquiti Bullet M", ubnt_bullet_m_setup);
AR71XX_MACH_UBNT_LSX, /* Ubiquiti LSX */
AR71XX_MACH_UBNT_RS, /* Ubiquiti RouterStation */
AR71XX_MACH_UBNT_RSPRO, /* Ubiquiti RouterStation Pro */
+ AR71XX_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */
AR71XX_MACH_WNR2000, /* NETGEAR WNR2000 */
AR71XX_MACH_WP543, /* Compex WP543 */
AR71XX_MACH_WRT160NL, /* Linksys WRT160NL */