[PATCH] ppc32: Dump error status for both PLB segments on 440SP

The PowerPC 440SP SoC has two Processor Local Bus (PLB) segments (a
high-throughput segment and a low-latency segment).  Fix our PLB register
definitions to cope with this, and add code to dump the status of both
segments when a machine check occurs.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

diff --git a/arch/ppc/syslib/ibm44x_common.c b/arch/ppc/syslib/ibm44x_common.c
index 5152c8e41340cca5f0a4437dd4fdb6c697b9677f..ebae2e2fcea68cb97f275d94a3e9f93f76b5d490 100644 (file)
--- a/arch/ppc/syslib/ibm44x_common.c
+++ b/arch/ppc/syslib/ibm44x_common.c
@@ -214,9 +214,20 @@ void __init ibm44x_platform_init(unsigned long r3, unsigned long r4, unsigned lo
 /* Called from machine_check_exception */
 void platform_machine_check(struct pt_regs *regs)
 {
+#ifdef CONFIG_440SP
+       printk("PLB0: BEAR=0x%08x%08x ACR=  0x%08x BESR= 0x%08x%08x\n",
+              mfdcr(DCRN_PLB0_BEARH), mfdcr(DCRN_PLB0_BEARL),
+              mfdcr(DCRN_PLB0_ACR), mfdcr(DCRN_PLB0_BESRH),
+              mfdcr(DCRN_PLB0_BESRL));
+       printk("PLB1: BEAR=0x%08x%08x ACR=  0x%08x BESR= 0x%08x%08x\n",
+              mfdcr(DCRN_PLB1_BEARH), mfdcr(DCRN_PLB1_BEARL),
+              mfdcr(DCRN_PLB1_ACR), mfdcr(DCRN_PLB1_BESRH),
+              mfdcr(DCRN_PLB1_BESRL));
+#else
        printk("PLB0: BEAR=0x%08x%08x ACR=  0x%08x BESR= 0x%08x\n",
                mfdcr(DCRN_PLB0_BEARH), mfdcr(DCRN_PLB0_BEARL),
                mfdcr(DCRN_PLB0_ACR),  mfdcr(DCRN_PLB0_BESR));
+#endif
        printk("POB0: BEAR=0x%08x%08x BESR0=0x%08x BESR1=0x%08x\n",
                mfdcr(DCRN_POB0_BEARH), mfdcr(DCRN_POB0_BEARL),
                mfdcr(DCRN_POB0_BESR0), mfdcr(DCRN_POB0_BESR1));

diff --git a/include/asm-ppc/ibm44x.h b/include/asm-ppc/ibm44x.h
index 197a9ff23dd5d8af1d854ecbe1b1141a5359f68e..0c2ba03a1d49bdec157f2ac8d41e17eade883043 100644 (file)
--- a/include/asm-ppc/ibm44x.h
+++ b/include/asm-ppc/ibm44x.h
@@ -302,6 +302,23 @@
 #define MALOBISR_CH0           0x80000000      /* EOB channel 1 bit */
 #define MALOBISR_CH2           0x40000000      /* EOB channel 2 bit */
 
+#if defined(CONFIG_440SP)
+/* 440SP PLB Arbiter DCRs */
+#define DCRN_PLB_REVID        0x080            /* PLB Revision ID */
+#define DCRN_PLB_CCR          0x088            /* PLB Crossbar Control */
+
+#define DCRN_PLB0_ACR         0x081            /* PLB Arbiter Control */
+#define DCRN_PLB0_BESRL               0x082            /* PLB Error Status */
+#define DCRN_PLB0_BESRH               0x083            /* PLB Error Status */
+#define DCRN_PLB0_BEARL               0x084            /* PLB Error Address Low */
+#define DCRN_PLB0_BEARH               0x085            /* PLB Error Address High */
+
+#define DCRN_PLB1_ACR          0x089           /* PLB Arbiter Control */
+#define DCRN_PLB1_BESRL                0x08a           /* PLB Error Status */
+#define DCRN_PLB1_BESRH                0x08b           /* PLB Error Status */
+#define DCRN_PLB1_BEARL                0x08c           /* PLB Error Address Low */
+#define DCRN_PLB1_BEARH                0x08d           /* PLB Error Address High */
+#else
 /* 440GP/GX PLB Arbiter DCRs */
 #define DCRN_PLB0_REVID                0x082           /* PLB Arbiter Revision ID */
 #define DCRN_PLB0_ACR          0x083           /* PLB Arbiter Control */
@@ -309,6 +326,7 @@
 #define DCRN_PLB0_BEARL                0x086           /* PLB Error Address Low */
 #define DCRN_PLB0_BEAR         DCRN_PLB0_BEARL /* 40x compatibility */
 #define DCRN_PLB0_BEARH                0x087           /* PLB Error Address High */
+#endif
 
 /* 440GP/GX PLB to OPB bridge DCRs */
 #define DCRN_POB0_BESR0                0x090