Doc: dt: arch_timer: discourage clock-frequency use

The ARM Generic Timer (AKA the architected timer, arm_arch_timer)
features a CPU register (CNTFRQ) which firmware is intended to
initialize, and non-secure software can read to determine the frequency
of the timer. On CPUs with secure state, this register cannot be written
from non-secure states.

The firmware of early SoCs featuring the timer did not correctly
initialize CNTFRQ correctly on all CPUs, requiring the frequency to be
described in DT as a workaround. This workaround is not complete however
as it is exposed to all software in a privileged non-secure mode
(including guests running under a hypervisor). The firmware and DTs for
recent SoCs have followed the example set by these early SoCs.

This patch updates the arch timer binding documentation to make it
clearer that the use of the clock-frequency property is a poor
work-around. The MMIO generic timer binding is similarly updated, though
this is less of a concern as there is generally no need to expose the
MMIO timers to guest OSs.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>

diff --git a/Documentation/devicetree/bindings/arm/arch_timer.txt b/Documentation/devicetree/bindings/arm/arch_timer.txt
index 256b4d8bab7b93d49330c7db5334eb05e8979904..e774128935d5c37ec88b8130ed667c5b4ff133df 100644 (file)
--- a/Documentation/devicetree/bindings/arm/arch_timer.txt
+++ b/Documentation/devicetree/bindings/arm/arch_timer.txt
@@ -17,7 +17,10 @@ to deliver its interrupts via SPIs.
 - interrupts : Interrupt list for secure, non-secure, virtual and
   hypervisor timers, in that order.
 
-- clock-frequency : The frequency of the main counter, in Hz. Optional.
+- clock-frequency : The frequency of the main counter, in Hz. Should be present
+  only where necessary to work around broken firmware which does not configure
+  CNTFRQ on all CPUs to a uniform correct value. Use of this property is
+  strongly discouraged; fix your firmware unless absolutely impossible.
 
 - always-on : a boolean property. If present, the timer is powered through an
   always-on power domain, therefore it never loses context.
@@ -46,7 +49,8 @@ Example:
 
 - compatible : Should at least contain "arm,armv7-timer-mem".
 
-- clock-frequency : The frequency of the main counter, in Hz. Optional.
+- clock-frequency : The frequency of the main counter, in Hz. Should be present
+  only when firmware has not configured the MMIO CNTFRQ registers.
 
 - reg : The control frame base address.