refresh patches

SVN-Revision: 20253

diff --git a/target/linux/xburst/patches-2.6.32/001-core.patch b/target/linux/xburst/patches-2.6.32/001-core.patch
index 4ee44a5294f8a6f8e5cdd6b85f688afb28015851..26863d87ed0927fb990e48f31e4f0fb25a5f1bdb 100644 (file)
--- a/target/linux/xburst/patches-2.6.32/001-core.patch
+++ b/target/linux/xburst/patches-2.6.32/001-core.patch
@@ -30,9 +30,17 @@ Subject: [PATCH] /opt/Projects/openwrt/target/linux/xburst/patches-2.6.31/001-co
  config LASAT
        bool "LASAT Networks platforms"
        select CEVT_R4K
+@@ -677,6 +680,7 @@ source "arch/mips/alchemy/Kconfig"
+ source "arch/mips/basler/excite/Kconfig"
+ source "arch/mips/bcm63xx/Kconfig"
+ source "arch/mips/jazz/Kconfig"
++source "arch/mips/jz4740/Kconfig"
+ source "arch/mips/lasat/Kconfig"
+ source "arch/mips/pmc-sierra/Kconfig"
+ source "arch/mips/sgi-ip27/Kconfig"
 --- a/arch/mips/Makefile
 +++ b/arch/mips/Makefile
-@@ -184,6 +184,14 @@ cflags-$(CONFIG_AR7)              += -I$(srctree)/ar
+@@ -186,6 +186,14 @@ cflags-$(CONFIG_AR7)              += -I$(srctree)/ar
  load-$(CONFIG_AR7)            += 0xffffffff94100000
  
  #
@@ -47,7 +55,7 @@ Subject: [PATCH] /opt/Projects/openwrt/target/linux/xburst/patches-2.6.31/001-co
  # Acer PICA 61, Mips Magnum 4000 and Olivetti M700.
  #
  core-$(CONFIG_MACH_JAZZ)      += arch/mips/jazz/
-@@ -705,6 +713,12 @@ makeboot =$(Q)$(MAKE) $(build)=arch/mips
+@@ -704,6 +712,12 @@ makeboot =$(Q)$(MAKE) $(build)=arch/mips
  
  all:  $(all-y)
  
@@ -60,7 +68,7 @@ Subject: [PATCH] /opt/Projects/openwrt/target/linux/xburst/patches-2.6.31/001-co
  vmlinux.bin: $(vmlinux-32)
        +@$(call makeboot,$@)
  
-@@ -734,6 +748,7 @@ install:
+@@ -733,6 +747,7 @@ install:
  
  archclean:
        @$(MAKE) $(clean)=arch/mips/boot
@@ -68,7 +76,7 @@ Subject: [PATCH] /opt/Projects/openwrt/target/linux/xburst/patches-2.6.31/001-co
        @$(MAKE) $(clean)=arch/mips/lasat
  
  define archhelp
-@@ -741,6 +756,9 @@ define archhelp
+@@ -740,6 +755,9 @@ define archhelp
        echo '  vmlinux.ecoff        - ECOFF boot image'
        echo '  vmlinux.bin          - Raw binary boot image'
        echo '  vmlinux.srec         - SREC boot image'
@@ -533,7 +541,7 @@ Subject: [PATCH] /opt/Projects/openwrt/target/linux/xburst/patches-2.6.31/001-co
  const char *__cpu_name[NR_CPUS];
  
  __cpuinit void cpu_probe(void)
-@@ -939,6 +957,9 @@ __cpuinit void cpu_probe(void)
+@@ -939,6 +955,9 @@ __cpuinit void cpu_probe(void)
        case PRID_COMP_CAVIUM:
                cpu_probe_cavium(c, cpu);
                break;

diff --git a/target/linux/xburst/patches-2.6.32/050-nand.patch b/target/linux/xburst/patches-2.6.32/050-nand.patch
index bdb1df8a3c68af83d5b0bc245575cff90efb01bc..9a8662b0a0c53f878bba90878d58a21276c18f63 100644 (file)
--- a/target/linux/xburst/patches-2.6.32/050-nand.patch
+++ b/target/linux/xburst/patches-2.6.32/050-nand.patch
@@ -31,4 +31,3 @@ Subject: [PATCH] /opt/Projects/openwrt/target/linux/xburst/patches-2.6.31/050-na
 +obj-$(CONFIG_MTD_NAND_JZ4740)         += jz4740_nand.o
  
  nand-objs := nand_base.o nand_bbt.o
-

diff --git a/target/linux/xburst/patches-2.6.32/103-serial.patch b/target/linux/xburst/patches-2.6.32/103-serial.patch
index 2401248a126f5bddb295d8bb705a3d806f2e611c..2810631f64468f34f50853f603239b48e1e6512c 100644 (file)
--- a/target/linux/xburst/patches-2.6.32/103-serial.patch
+++ b/target/linux/xburst/patches-2.6.32/103-serial.patch
@@ -9,7 +9,7 @@ Subject: [PATCH] /opt/Projects/openwrt/target/linux/xburst/patches-2.6.31/103-se
 
 --- a/drivers/serial/8250.c
 +++ b/drivers/serial/8250.c
-@@ -196,7 +196,7 @@ static const struct serial8250_config ua
+@@ -199,7 +199,7 @@ static const struct serial8250_config ua
        [PORT_16550A] = {
                .name           = "16550A",
                .fifo_size      = 16,
@@ -18,7 +18,7 @@ Subject: [PATCH] /opt/Projects/openwrt/target/linux/xburst/patches-2.6.31/103-se
                .fcr            = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
                .flags          = UART_CAP_FIFO,
        },
-@@ -403,6 +403,10 @@ static unsigned int mem_serial_in(struct
+@@ -406,6 +406,10 @@ static unsigned int mem_serial_in(struct
  static void mem_serial_out(struct uart_port *p, int offset, int value)
  {
        offset = map_8250_out_reg(p, offset) << p->regshift;
@@ -29,7 +29,7 @@ Subject: [PATCH] /opt/Projects/openwrt/target/linux/xburst/patches-2.6.31/103-se
        writeb(value, p->membase + offset);
  }
  
-@@ -2213,6 +2217,83 @@ static void serial8250_shutdown(struct u
+@@ -2214,6 +2218,83 @@ static void serial8250_shutdown(struct u
                serial_unlink_irq_chain(up);
  }
  
@@ -113,7 +113,7 @@ Subject: [PATCH] /opt/Projects/openwrt/target/linux/xburst/patches-2.6.31/103-se
  static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int baud)
  {
        unsigned int quot;
-@@ -2232,6 +2313,7 @@ static unsigned int serial8250_get_divis
+@@ -2233,6 +2314,7 @@ static unsigned int serial8250_get_divis
  
        return quot;
  }
@@ -121,7 +121,7 @@ Subject: [PATCH] /opt/Projects/openwrt/target/linux/xburst/patches-2.6.31/103-se
  
  static void
  serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
-@@ -2241,6 +2323,9 @@ serial8250_set_termios(struct uart_port 
+@@ -2242,6 +2324,9 @@ serial8250_set_termios(struct uart_port 
        unsigned char cval, fcr = 0;
        unsigned long flags;
        unsigned int baud, quot;
@@ -131,7 +131,7 @@ Subject: [PATCH] /opt/Projects/openwrt/target/linux/xburst/patches-2.6.31/103-se
  
        switch (termios->c_cflag & CSIZE) {
        case CS5:
-@@ -2275,7 +2360,12 @@ serial8250_set_termios(struct uart_port 
+@@ -2276,7 +2361,12 @@ serial8250_set_termios(struct uart_port 
        baud = uart_get_baud_rate(port, termios, old,
                                  port->uartclk / 16 / 0xffff,
                                  port->uartclk / 16);
@@ -144,7 +144,7 @@ Subject: [PATCH] /opt/Projects/openwrt/target/linux/xburst/patches-2.6.31/103-se
  
        /*
         * Oxford Semi 952 rev B workaround
-@@ -2353,6 +2443,10 @@ serial8250_set_termios(struct uart_port 
+@@ -2354,6 +2444,10 @@ serial8250_set_termios(struct uart_port 
        if (up->capabilities & UART_CAP_UUE)
                up->ier |= UART_IER_UUE | UART_IER_RTOIE;
  
@@ -155,7 +155,7 @@ Subject: [PATCH] /opt/Projects/openwrt/target/linux/xburst/patches-2.6.31/103-se
        serial_out(up, UART_IER, up->ier);
  
        if (up->capabilities & UART_CAP_EFR) {
-@@ -2387,7 +2481,15 @@ serial8250_set_termios(struct uart_port 
+@@ -2388,7 +2482,15 @@ serial8250_set_termios(struct uart_port 
                serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */
        }
  

diff --git a/target/linux/xburst/patches-2.6.32/106-gpio-charger.patch b/target/linux/xburst/patches-2.6.32/106-gpio-charger.patch
index dd1713a4d6e83594e113c4caf19079f461947a89..641aba17c29f08f6a5c32ee69ee96223062e3031 100644 (file)
--- a/target/linux/xburst/patches-2.6.32/106-gpio-charger.patch
+++ b/target/linux/xburst/patches-2.6.32/106-gpio-charger.patch
@@ -1,13 +1,13 @@
---- a/drivers/power/Makefile   2010-02-03 13:16:32.000000000 +0100
-+++ b/drivers/power/Makefile   2010-02-01 14:55:46.000000000 +0100
-@@ -30,3 +30,4 @@
+--- a/drivers/power/Makefile
++++ b/drivers/power/Makefile
+@@ -30,3 +30,4 @@ obj-$(CONFIG_BATTERY_DA9030) += da9030_b
  obj-$(CONFIG_BATTERY_MAX17040)        += max17040_battery.o
  obj-$(CONFIG_CHARGER_PCF50633)        += pcf50633-charger.o
  obj-$(CONFIG_BATTERY_JZ4740)  += jz4740-battery.o
 +obj-$(CONFIG_CHARGER_GPIO)    += gpio-charger.o
---- a/drivers/power/Kconfig    2010-02-03 13:16:32.000000000 +0100
-+++ b/drivers/power/Kconfig    2010-02-01 14:58:24.000000000 +0100
-@@ -121,4 +121,11 @@
+--- a/drivers/power/Kconfig
++++ b/drivers/power/Kconfig
+@@ -121,4 +121,11 @@ config BATTERY_JZ4740
          This driver can be build as a module. If so, the module will be
          called jz4740-battery.