ar71xx: remove pb92 images in backfire, the port is incomplete
authorFelix Fietkau <nbd@openwrt.org>
Tue, 6 Apr 2010 00:08:53 +0000 (00:08 +0000)
committerFelix Fietkau <nbd@openwrt.org>
Tue, 6 Apr 2010 00:08:53 +0000 (00:08 +0000)
SVN-Revision: 20724

target/linux/ar71xx/image/Makefile

index 00580fd8a389aa36eceddc250a7595b8eb14b75d..da4fe5d64fb79eac8fc187a33434d5297c5fcc0a 100644 (file)
@@ -200,27 +200,6 @@ define Image/Build/AP83
        fi; fi
 endef
 
-define Image/Build/PB92
-       $(call PatchKernelGzip,$(2),$(3))
-       if [ `stat -c%s $(KDIR)/root.$(1)` -gt 2818048 ]; then \
-               echo "Warning: $(KDIR)/root.$(1) is too big"; \
-       else \
-               mkimage -A mips -O linux -T kernel -a 0x80060000 -C gzip -e \
-                       0x80060000 \
-                       -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
-                       -d $(KDIR)/vmlinux-$(2).bin.gz \
-                       $(KDIR)/vmlinux-$(2).uImage; \
-               dd if=$(KDIR)/vmlinux-$(2).uImage \
-                       of=$(call imgname,kernel,$(2)).bin bs=64k conv=sync; \
-               dd if=$(KDIR)/root.$(1) \
-                       of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync; \
-               ( \
-                       dd if=$(KDIR)/vmlinux-$(2).uImage bs=896k conv=sync; \
-                       dd if=$(KDIR)/root.$(1); \
-               ) > $(call imgname,$(1),$(2))-sysupgrade.bin; \
-       fi
-endef
-
 define Image/Build/PB4X
        $(call PatchKernelLzma,$(2),$(3))
        dd if=$(KDIR)/vmlinux-$(2).bin.lzma \
@@ -421,10 +400,6 @@ define Image/Build/Profile/PB44
        $(call Image/Build/Template/$(fs_64k)/$(1),PB4X,pb44,board=PB44)
 endef
 
-define Image/Build/Profile/PB92
-       $(call Image/Build/Template/$(fs_64k)/$(1),PB92,pb92,board=PB92)
-endef
-
 define Image/Build/Profile/WP543
        $(call Image/Build/Template/$(fs_64k)/$(1),MyLoader,wp543,0x200000,2M)
        $(call Image/Build/Template/$(fs_64k)/$(1),MyLoader,wp543,0x400000,4M)
@@ -557,7 +532,6 @@ define Image/Build/Profile/Default
        $(call Image/Build/Profile/MZKW300NH,$(1))
        $(call Image/Build/Profile/PB42,$(1))
        $(call Image/Build/Profile/PB44,$(1))
-       $(call Image/Build/Profile/PB92,$(1))
        $(call Image/Build/Profile/TEW632BRP,$(1))
        $(call Image/Build/Profile/TEW652BRP,$(1))
        $(call Image/Build/Profile/TLWR741NDV1,$(1))