+++ /dev/null
---- a/drivers/usb/Makefile
-+++ b/drivers/usb/Makefile
-@@ -11,6 +11,8 @@ obj-$(CONFIG_USB_DWC2) += dwc2/
-
- obj-$(CONFIG_USB_MON) += mon/
-
-+obj-$(CONFIG_USB_PHY) += phy/
-+
- obj-$(CONFIG_PCI) += host/
- obj-$(CONFIG_USB_EHCI_HCD) += host/
- obj-$(CONFIG_USB_ISP116X_HCD) += host/
---- a/drivers/usb/core/hcd-pci.c
-+++ b/drivers/usb/core/hcd-pci.c
-@@ -214,8 +214,13 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
- goto disable_pci;
- }
-
-+
-+#ifdef CONFIG_USB_MT7621_XHCI_PLATFORM
-+ hcd->amd_resume_bug = 0;
-+#else
- hcd->amd_resume_bug = (usb_hcd_amd_remote_wakeup_quirk(dev) &&
- driver->flags & (HCD_USB11 | HCD_USB3)) ? 1 : 0;
-+#endif
-
- if (driver->flags & HCD_MEMORY) {
- /* EHCI, OHCI */
---- a/drivers/usb/core/hub.c
-+++ b/drivers/usb/core/hub.c
-@@ -1286,7 +1286,7 @@ static void hub_quiesce(struct usb_hub *hub, enum hub_quiescing_type type)
- if (type != HUB_SUSPEND) {
- /* Disconnect all the children */
- for (i = 0; i < hdev->maxchild; ++i) {
-- if (hub->ports[i]->child)
-+ if (hub->ports[i] && hub->ports[i]->child)
- usb_disconnect(&hub->ports[i]->child);
- }
- }
---- a/drivers/usb/core/port.c
-+++ b/drivers/usb/core/port.c
-@@ -480,8 +480,10 @@ void usb_hub_remove_port_device(struct usb_hub *hub, int port1)
- struct usb_port *port_dev = hub->ports[port1 - 1];
- struct usb_port *peer;
-
-- peer = port_dev->peer;
-- if (peer)
-- unlink_peers(port_dev, peer);
-- device_unregister(&port_dev->dev);
-+ if(port_dev) {
-+ peer = port_dev->peer;
-+ if (peer)
-+ unlink_peers(port_dev, peer);
-+ device_unregister(&port_dev->dev);
-+ }
- }
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -32,7 +32,12 @@ config USB_XHCI_PCI
- default y
-
- config USB_XHCI_PLATFORM
-- tristate
-+ tristate "xHCI platform"
-+
-+config USB_MT7621_XHCI_PLATFORM
-+ bool "MTK MT7621 xHCI"
-+ depends on USB_XHCI_PLATFORM
-+ depends on SOC_MT7621
-
- config USB_XHCI_MVEBU
- tristate "xHCI support for Marvell Armada 375/38x"
---- a/drivers/usb/host/Makefile
-+++ b/drivers/usb/host/Makefile
-@@ -16,7 +16,12 @@ xhci-hcd-y := xhci.o xhci-mem.o
- xhci-hcd-y += xhci-ring.o xhci-hub.o xhci-dbg.o
- xhci-hcd-y += xhci-trace.o
-
-+ifdef CONFIG_USB_MT7621_XHCI_PLATFORM
-+xhci-hcd-y += mtk-phy.o xhci-mtk-scheduler.o xhci-mtk-power.o xhci-mtk.o mtk-phy-7621.o mtk-phy-ahb.o
-+endif
-+
- xhci-plat-hcd-y := xhci-plat.o
-+
- ifneq ($(CONFIG_USB_XHCI_MVEBU), )
- xhci-plat-hcd-y += xhci-mvebu.o
- endif
-@@ -26,9 +31,14 @@ endif
-
- obj-$(CONFIG_USB_WHCI_HCD) += whci/
-
-+ifndef CONFIG_USB_MT7621_XHCI_PLATFORM
- obj-$(CONFIG_PCI) += pci-quirks.o
-+endif
-
-+ifndef CONFIG_USB_MT7621_XHCI_PLATFORM
- obj-$(CONFIG_USB_XHCI_PCI) += xhci-pci.o
-+endif
-+
- obj-$(CONFIG_USB_XHCI_PLATFORM) += xhci-plat-hcd.o
-
- obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
---- /dev/null
-+++ b/drivers/usb/host/mtk-phy-7621.c
-@@ -0,0 +1,445 @@
-+#include "mtk-phy.h"
-+
-+#ifdef CONFIG_PROJECT_7621
-+#include "mtk-phy-7621.h"
-+
-+//not used on SoC
-+PHY_INT32 phy_init(struct u3phy_info *info){
-+ return PHY_TRUE;
-+}
-+
-+//not used on SoC
-+PHY_INT32 phy_change_pipe_phase(struct u3phy_info *info, PHY_INT32 phy_drv, PHY_INT32 pipe_phase){
-+ return PHY_TRUE;
-+}
-+
-+//--------------------------------------------------------
-+// Function : fgEyeScanHelper_CheckPtInRegion()
-+// Description : Check if the test point is in a rectangle region.
-+// If it is in the rectangle, also check if this point
-+// is on the multiple of deltaX and deltaY.
-+// Parameter : strucScanRegion * prEye - the region
-+// BYTE bX
-+// BYTE bY
-+// Return : BYTE - TRUE : This point needs to be tested
-+// FALSE: This point will be omitted
-+// Note : First check within the rectangle.
-+// Secondly, use modulous to check if the point will be tested.
-+//--------------------------------------------------------
-+static PHY_INT8 fgEyeScanHelper_CheckPtInRegion(struct strucScanRegion * prEye, PHY_INT8 bX, PHY_INT8 bY)
-+{
-+ PHY_INT8 fgValid = true;
-+
-+
-+ /// Be careful, the axis origin is on the TOP-LEFT corner.
-+ /// Therefore the top-left point has the minimum X and Y
-+ /// Botton-right point is the maximum X and Y
-+ if ( (prEye->bX_tl <= bX) && (bX <= prEye->bX_br)
-+ && (prEye->bY_tl <= bY) && (bY <= prEye->bX_br))
-+ {
-+ // With the region, now check whether or not the input test point is
-+ // on the multiples of X and Y
-+ // Do not have to worry about negative value, because we have already
-+ // check the input bX, and bY is within the region.
-+ if ( ((bX - prEye->bX_tl) % (prEye->bDeltaX))
-+ || ((bY - prEye->bY_tl) % (prEye->bDeltaY)) )
-+ {
-+ // if the division will have remainder, that means
-+ // the input test point is on the multiples of X and Y
-+ fgValid = false;
-+ }
-+ else
-+ {
-+ }
-+ }
-+ else
-+ {
-+
-+ fgValid = false;
-+ }
-+ return fgValid;
-+}
-+
-+//--------------------------------------------------------
-+// Function : EyeScanHelper_RunTest()
-+// Description : Enable the test, and wait til it is completed
-+// Parameter : None
-+// Return : None
-+// Note : None
-+//--------------------------------------------------------
-+static void EyeScanHelper_RunTest(struct u3phy_info *info)
-+{
-+ DRV_UDELAY(100);
-+ // Disable the test
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
-+ , RG_SSUSB_EQ_EYE_CNT_EN_OFST, RG_SSUSB_EQ_EYE_CNT_EN, 0); //RG_SSUSB_RX_EYE_CNT_EN = 0
-+ DRV_UDELAY(100);
-+ // Run the test
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
-+ , RG_SSUSB_EQ_EYE_CNT_EN_OFST, RG_SSUSB_EQ_EYE_CNT_EN, 1); //RG_SSUSB_RX_EYE_CNT_EN = 1
-+ DRV_UDELAY(100);
-+ // Wait til it's done
-+ //RGS_SSUSB_RX_EYE_CNT_RDY
-+ while(!U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon5)
-+ , RGS_SSUSB_EQ_EYE_CNT_RDY_OFST, RGS_SSUSB_EQ_EYE_CNT_RDY));
-+}
-+
-+//--------------------------------------------------------
-+// Function : fgEyeScanHelper_CalNextPoint()
-+// Description : Calcualte the test point for the measurement
-+// Parameter : None
-+// Return : BOOL - TRUE : the next point is within the
-+// boundaryof HW limit
-+// FALSE: the next point is out of the HW limit
-+// Note : The next point is obtained by calculating
-+// from the bottom left of the region rectangle
-+// and then scanning up until it reaches the upper
-+// limit. At this time, the x will increment, and
-+// start scanning downwards until the y hits the
-+// zero.
-+//--------------------------------------------------------
-+static PHY_INT8 fgEyeScanHelper_CalNextPoint(void)
-+{
-+ if ( ((_bYcurr == MAX_Y) && (_eScanDir == SCAN_DN))
-+ || ((_bYcurr == MIN_Y) && (_eScanDir == SCAN_UP))
-+ )
-+ {
-+ /// Reaches the limit of Y axis
-+ /// Increment X
-+ _bXcurr++;
-+ _fgXChged = true;
-+ _eScanDir = (_eScanDir == SCAN_UP) ? SCAN_DN : SCAN_UP;
-+
-+ if (_bXcurr > MAX_X)
-+ {
-+ return false;
-+ }
-+ }
-+ else
-+ {
-+ _bYcurr = (_eScanDir == SCAN_DN) ? _bYcurr + 1 : _bYcurr - 1;
-+ _fgXChged = false;
-+ }
-+ return PHY_TRUE;
-+}
-+
-+PHY_INT32 eyescan_init(struct u3phy_info *info){
-+ //initial PHY setting
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phya_regs->rega)
-+ , RG_SSUSB_CDR_EPEN_OFST, RG_SSUSB_CDR_EPEN, 1);
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->phyd_mix3)
-+ , RG_SSUSB_FORCE_CDR_PI_PWD_OFST, RG_SSUSB_FORCE_CDR_PI_PWD, 1);
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
-+ , RG_SSUSB_RX_PI_CAL_EN_SEL_OFST, RG_SSUSB_RX_PI_CAL_EN_SEL, 1); //RG_SSUSB_RX_PI_CAL_MANUAL_SEL = 1
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
-+ , RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 1); //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 1
-+ return PHY_TRUE;
-+}
-+
-+PHY_INT32 phy_eyescan(struct u3phy_info *info, PHY_INT32 x_t1, PHY_INT32 y_t1, PHY_INT32 x_br, PHY_INT32 y_br, PHY_INT32 delta_x, PHY_INT32 delta_y
-+ , PHY_INT32 eye_cnt, PHY_INT32 num_cnt, PHY_INT32 PI_cal_en, PHY_INT32 num_ignore_cnt){
-+ PHY_INT32 cOfst = 0;
-+ PHY_UINT8 bIdxX = 0;
-+ PHY_UINT8 bIdxY = 0;
-+ //PHY_INT8 bCnt = 0;
-+ PHY_UINT8 bIdxCycCnt = 0;
-+ PHY_INT8 fgValid;
-+ PHY_INT8 cX;
-+ PHY_INT8 cY;
-+ PHY_UINT8 bExtendCnt;
-+ PHY_INT8 isContinue;
-+ //PHY_INT8 isBreak;
-+ PHY_UINT32 wErr0 = 0, wErr1 = 0;
-+ //PHY_UINT32 temp;
-+
-+ PHY_UINT32 pwErrCnt0[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX];
-+ PHY_UINT32 pwErrCnt1[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX];
-+
-+ _rEye1.bX_tl = x_t1;
-+ _rEye1.bY_tl = y_t1;
-+ _rEye1.bX_br = x_br;
-+ _rEye1.bY_br = y_br;
-+ _rEye1.bDeltaX = delta_x;
-+ _rEye1.bDeltaY = delta_y;
-+
-+ _rEye2.bX_tl = x_t1;
-+ _rEye2.bY_tl = y_t1;
-+ _rEye2.bX_br = x_br;
-+ _rEye2.bY_br = y_br;
-+ _rEye2.bDeltaX = delta_x;
-+ _rEye2.bDeltaY = delta_y;
-+
-+ _rTestCycle.wEyeCnt = eye_cnt;
-+ _rTestCycle.bNumOfEyeCnt = num_cnt;
-+ _rTestCycle.bNumOfIgnoreCnt = num_ignore_cnt;
-+ _rTestCycle.bPICalEn = PI_cal_en;
-+
-+ _bXcurr = 0;
-+ _bYcurr = 0;
-+ _eScanDir = SCAN_DN;
-+ _fgXChged = false;
-+
-+ printk("x_t1: %x, y_t1: %x, x_br: %x, y_br: %x, delta_x: %x, delta_y: %x, \
-+ eye_cnt: %x, num_cnt: %x, PI_cal_en: %x, num_ignore_cnt: %x\n", \
-+ x_t1, y_t1, x_br, y_br, delta_x, delta_y, eye_cnt, num_cnt, PI_cal_en, num_ignore_cnt);
-+
-+ //force SIGDET to OFF
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
-+ , RG_SSUSB_RX_SIGDET_EN_SEL_OFST, RG_SSUSB_RX_SIGDET_EN_SEL, 1); //RG_SSUSB_RX_SIGDET_SEL = 1
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
-+ , RG_SSUSB_RX_SIGDET_EN_OFST, RG_SSUSB_RX_SIGDET_EN, 0); //RG_SSUSB_RX_SIGDET_EN = 0
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye1)
-+ , RG_SSUSB_EQ_SIGDET_OFST, RG_SSUSB_EQ_SIGDET, 0); //RG_SSUSB_RX_SIGDET = 0
-+
-+ // RX_TRI_DET_EN to Disable
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq3)
-+ , RG_SSUSB_EQ_TRI_DET_EN_OFST, RG_SSUSB_EQ_TRI_DET_EN, 0); //RG_SSUSB_RX_TRI_DET_EN = 0
-+
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
-+ , RG_SSUSB_EQ_EYE_MON_EN_OFST, RG_SSUSB_EQ_EYE_MON_EN, 1); //RG_SSUSB_EYE_MON_EN = 1
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
-+ , RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, 0); //RG_SSUSB_RX_EYE_XOFFSET = 0
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
-+ , RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, 0); //RG_SSUSB_RX_EYE0_Y = 0
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
-+ , RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, 0); //RG_SSUSB_RX_EYE1_Y = 0
-+
-+
-+ if (PI_cal_en){
-+ // PI Calibration
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
-+ , RG_SSUSB_RX_PI_CAL_EN_SEL_OFST, RG_SSUSB_RX_PI_CAL_EN_SEL, 1); //RG_SSUSB_RX_PI_CAL_MANUAL_SEL = 1
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
-+ , RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 0); //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 0
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
-+ , RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 1); //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 1
-+
-+ DRV_UDELAY(20);
-+
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
-+ , RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 0); //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 0
-+ _bPIResult = U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon5)
-+ , RGS_SSUSB_EQ_PILPO_OFST, RGS_SSUSB_EQ_PILPO); //read RGS_SSUSB_RX_PILPO
-+
-+ printk(KERN_ERR "PI result: %d\n", _bPIResult);
-+ }
-+ // Read Initial DAC
-+ // Set CYCLE
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye3)
-+ ,RG_SSUSB_EQ_EYE_CNT_OFST, RG_SSUSB_EQ_EYE_CNT, eye_cnt); //RG_SSUSB_RX_EYE_CNT
-+
-+ // Eye Monitor Feature
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye1)
-+ , RG_SSUSB_EQ_EYE_MASK_OFST, RG_SSUSB_EQ_EYE_MASK, 0x3ff); //RG_SSUSB_RX_EYE_MASK = 0x3ff
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
-+ , RG_SSUSB_EQ_EYE_MON_EN_OFST, RG_SSUSB_EQ_EYE_MON_EN, 1); //RG_SSUSB_EYE_MON_EN = 1
-+
-+ // Move X,Y to the top-left corner
-+ for (cOfst = 0; cOfst >= -64; cOfst--)
-+ {
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
-+ ,RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, cOfst); //RG_SSUSB_RX_EYE_XOFFSET
-+ }
-+ for (cOfst = 0; cOfst < 64; cOfst++)
-+ {
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
-+ , RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, cOfst); //RG_SSUSB_RX_EYE0_Y
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
-+ , RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, cOfst); //RG_SSUSB_RX_EYE1_Y
-+ }
-+ //ClearErrorResult
-+ for(bIdxCycCnt = 0; bIdxCycCnt < CYCLE_COUNT_MAX; bIdxCycCnt++){
-+ for(bIdxX = 0; bIdxX < ERRCNT_MAX; bIdxX++)
-+ {
-+ for(bIdxY = 0; bIdxY < ERRCNT_MAX; bIdxY++){
-+ pwErrCnt0[bIdxCycCnt][bIdxX][bIdxY] = 0;
-+ pwErrCnt1[bIdxCycCnt][bIdxX][bIdxY] = 0;
-+ }
-+ }
-+ }
-+ isContinue = true;
-+ while(isContinue){
-+ //printk(KERN_ERR "_bXcurr: %d, _bYcurr: %d\n", _bXcurr, _bYcurr);
-+ // The point is within the boundary, then let's check if it is within
-+ // the testing region.
-+ // The point is only test-able if one of the eye region
-+ // includes this point.
-+ fgValid = fgEyeScanHelper_CheckPtInRegion(&_rEye1, _bXcurr, _bYcurr)
-+ || fgEyeScanHelper_CheckPtInRegion(&_rEye2, _bXcurr, _bYcurr);
-+ // Translate bX and bY to 2's complement from where the origin was on the
-+ // top left corner.
-+ // 0x40 and 0x3F needs a bit of thinking!!!! >"<
-+ cX = (_bXcurr ^ 0x40);
-+ cY = (_bYcurr ^ 0x3F);
-+
-+ // Set X if necessary
-+ if (_fgXChged == true)
-+ {
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
-+ , RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, cX); //RG_SSUSB_RX_EYE_XOFFSET
-+ }
-+ // Set Y
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
-+ , RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, cY); //RG_SSUSB_RX_EYE0_Y
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
-+ , RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, cY); //RG_SSUSB_RX_EYE1_Y
-+
-+ /// Test this point!
-+ if (fgValid){
-+ for (bExtendCnt = 0; bExtendCnt < num_ignore_cnt; bExtendCnt++)
-+ {
-+ //run test
-+ EyeScanHelper_RunTest(info);
-+ }
-+ for (bExtendCnt = 0; bExtendCnt < num_cnt; bExtendCnt++)
-+ {
-+ EyeScanHelper_RunTest(info);
-+ wErr0 = U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon3)
-+ , RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0_OFST, RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0);
-+ wErr1 = U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon4)
-+ , RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1_OFST, RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1);
-+
-+ pwErrCnt0[bExtendCnt][_bXcurr][_bYcurr] = wErr0;
-+ pwErrCnt1[bExtendCnt][_bXcurr][_bYcurr] = wErr1;
-+
-+ //EyeScanHelper_GetResult(&_rRes.pwErrCnt0[bCnt], &_rRes.pwErrCnt1[bCnt]);
-+// printk(KERN_ERR "cnt[%d] cur_x,y [0x%x][0x%x], cX,cY [0x%x][0x%x], ErrCnt[%d][%d]\n"
-+// , bExtendCnt, _bXcurr, _bYcurr, cX, cY, pwErrCnt0[bExtendCnt][_bXcurr][_bYcurr], pwErrCnt1[bExtendCnt][_bXcurr][_bYcurr]);
-+ }
-+ //printk(KERN_ERR "cur_x,y [0x%x][0x%x], cX,cY [0x%x][0x%x], ErrCnt[%d][%d]\n", _bXcurr, _bYcurr, cX, cY, pwErrCnt0[0][_bXcurr][_bYcurr], pwErrCnt1[0][_bXcurr][_bYcurr]);
-+ }
-+ else{
-+
-+ }
-+ if (fgEyeScanHelper_CalNextPoint() == false){
-+#if 0
-+ printk(KERN_ERR "Xcurr [0x%x] Ycurr [0x%x]\n", _bXcurr, _bYcurr);
-+ printk(KERN_ERR "XcurrREG [0x%x] YcurrREG [0x%x]\n", cX, cY);
-+#endif
-+ printk(KERN_ERR "end of eye scan\n");
-+ isContinue = false;
-+ }
-+ }
-+ printk(KERN_ERR "CurX [0x%x] CurY [0x%x]\n"
-+ , U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET)
-+ , U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y));
-+
-+ // Move X,Y to the top-left corner
-+ for (cOfst = 63; cOfst >= 0; cOfst--)
-+ {
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
-+ , RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, cOfst); //RG_SSUSB_RX_EYE_XOFFSET
-+ }
-+ for (cOfst = 63; cOfst >= 0; cOfst--)
-+ {
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
-+ , RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, cOfst);
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
-+ , RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, cOfst);
-+
-+ }
-+ printk(KERN_ERR "CurX [0x%x] CurY [0x%x]\n"
-+ , U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET)
-+ , U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y));
-+
-+ printk(KERN_ERR "PI result: %d\n", _bPIResult);
-+ printk(KERN_ERR "pwErrCnt0 addr: 0x%x\n", (PHY_UINT32)pwErrCnt0);
-+ printk(KERN_ERR "pwErrCnt1 addr: 0x%x\n", (PHY_UINT32)pwErrCnt1);
-+
-+ return PHY_TRUE;
-+}
-+
-+//not used on SoC
-+PHY_INT32 u2_save_cur_en(struct u3phy_info *info){
-+ return PHY_TRUE;
-+}
-+
-+//not used on SoC
-+PHY_INT32 u2_save_cur_re(struct u3phy_info *info){
-+ return PHY_TRUE;
-+}
-+
-+PHY_INT32 u2_slew_rate_calibration(struct u3phy_info *info){
-+ PHY_INT32 i=0;
-+ //PHY_INT32 j=0;
-+ //PHY_INT8 u1SrCalVal = 0;
-+ //PHY_INT8 u1Reg_addr_HSTX_SRCAL_EN;
-+ PHY_INT32 fgRet = 0;
-+ PHY_INT32 u4FmOut = 0;
-+ PHY_INT32 u4Tmp = 0;
-+ //PHY_INT32 temp;
-+
-+ // => RG_USB20_HSTX_SRCAL_EN = 1
-+ // enable HS TX SR calibration
-+ U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0)
-+ , RG_USB20_HSTX_SRCAL_EN_OFST, RG_USB20_HSTX_SRCAL_EN, 0x1);
-+ DRV_MSLEEP(1);
-+
-+ // => RG_FRCK_EN = 1
-+ // Enable free run clock
-+ U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmmonr1)
-+ , RG_FRCK_EN_OFST, RG_FRCK_EN, 1);
-+
-+ // MT6290 HS signal quality patch
-+ // => RG_CYCLECNT = 400
-+ // Setting cyclecnt =400
-+ U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmcr0)
-+ , RG_CYCLECNT_OFST, RG_CYCLECNT, 0x400);
-+
-+ // => RG_FREQDET_EN = 1
-+ // Enable frequency meter
-+ U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmcr0)
-+ , RG_FREQDET_EN_OFST, RG_FREQDET_EN, 0x1);
-+
-+ // wait for FM detection done, set 10ms timeout
-+ for(i=0; i<10; i++){
-+ // => u4FmOut = USB_FM_OUT
-+ // read FM_OUT
-+ u4FmOut = U3PhyReadReg32(((PHY_UINT32)&info->sifslv_fm_regs->fmmonr0));
-+ printk("FM_OUT value: u4FmOut = %d(0x%08X)\n", u4FmOut, u4FmOut);
-+
-+ // check if FM detection done
-+ if (u4FmOut != 0)
-+ {
-+ fgRet = 0;
-+ printk("FM detection done! loop = %d\n", i);
-+
-+ break;
-+ }
-+
-+ fgRet = 1;
-+ DRV_MSLEEP(1);
-+ }
-+ // => RG_FREQDET_EN = 0
-+ // disable frequency meter
-+ U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmcr0)
-+ , RG_FREQDET_EN_OFST, RG_FREQDET_EN, 0);
-+
-+ // => RG_FRCK_EN = 0
-+ // disable free run clock
-+ U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmmonr1)
-+ , RG_FRCK_EN_OFST, RG_FRCK_EN, 0);
-+
-+ // => RG_USB20_HSTX_SRCAL_EN = 0
-+ // disable HS TX SR calibration
-+ U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0)
-+ , RG_USB20_HSTX_SRCAL_EN_OFST, RG_USB20_HSTX_SRCAL_EN, 0);
-+ DRV_MSLEEP(1);
-+
-+ if(u4FmOut == 0){
-+ U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0)
-+ , RG_USB20_HSTX_SRCTRL_OFST, RG_USB20_HSTX_SRCTRL, 0x4);
-+
-+ fgRet = 1;
-+ }
-+ else{
-+ // set reg = (1024/FM_OUT) * 25 * 0.028 (round to the nearest digits)
-+ u4Tmp = (((1024 * 25 * U2_SR_COEF_7621) / u4FmOut) + 500) / 1000;
-+ printk("SR calibration value u1SrCalVal = %d\n", (PHY_UINT8)u4Tmp);
-+ U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0)
-+ , RG_USB20_HSTX_SRCTRL_OFST, RG_USB20_HSTX_SRCTRL, u4Tmp);
-+ }
-+ return fgRet;
-+}
-+
-+#endif
---- /dev/null
-+++ b/drivers/usb/host/mtk-phy-7621.h
-@@ -0,0 +1,2871 @@
-+#ifdef CONFIG_PROJECT_7621
-+#ifndef __MTK_PHY_7621_H
-+#define __MTK_PHY_7621_H
-+
-+#define U2_SR_COEF_7621 28
-+
-+///////////////////////////////////////////////////////////////////////////////
-+
-+struct u2phy_reg {
-+ //0x0
-+ PHY_LE32 u2phyac0;
-+ PHY_LE32 u2phyac1;
-+ PHY_LE32 u2phyac2;
-+ PHY_LE32 reserve0;
-+ //0x10
-+ PHY_LE32 u2phyacr0;
-+ PHY_LE32 u2phyacr1;
-+ PHY_LE32 u2phyacr2;
-+ PHY_LE32 u2phyacr3;
-+ //0x20
-+ PHY_LE32 u2phyacr4;
-+ PHY_LE32 u2phyamon0;
-+ PHY_LE32 reserve1[2];
-+ //0x30~0x50
-+ PHY_LE32 reserve2[12];
-+ //0x60
-+ PHY_LE32 u2phydcr0;
-+ PHY_LE32 u2phydcr1;
-+ PHY_LE32 u2phydtm0;
-+ PHY_LE32 u2phydtm1;
-+ //0x70
-+ PHY_LE32 u2phydmon0;
-+ PHY_LE32 u2phydmon1;
-+ PHY_LE32 u2phydmon2;
-+ PHY_LE32 u2phydmon3;
-+ //0x80
-+ PHY_LE32 u2phybc12c;
-+ PHY_LE32 u2phybc12c1;
-+ PHY_LE32 reserve3[2];
-+ //0x90~0xe0
-+ PHY_LE32 reserve4[24];
-+ //0xf0
-+ PHY_LE32 reserve6[3];
-+ PHY_LE32 regfcom;
-+};
-+
-+//U3D_U2PHYAC0
-+#define RG_USB20_USBPLL_DIVEN (0x7<<28) //30:28
-+#define RG_USB20_USBPLL_CKCTRL (0x3<<26) //27:26
-+#define RG_USB20_USBPLL_PREDIV (0x3<<24) //25:24
-+#define RG_USB20_USBPLL_FORCE_ON (0x1<<23) //23:23
-+#define RG_USB20_USBPLL_FBDIV (0x7f<<16) //22:16
-+#define RG_USB20_REF_EN (0x1<<15) //15:15
-+#define RG_USB20_INTR_EN (0x1<<14) //14:14
-+#define RG_USB20_BG_TRIM (0xf<<8) //11:8
-+#define RG_USB20_BG_RBSEL (0x3<<6) //7:6
-+#define RG_USB20_BG_RASEL (0x3<<4) //5:4
-+#define RG_USB20_BGR_DIV (0x3<<2) //3:2
-+#define RG_SIFSLV_CHP_EN (0x1<<1) //1:1
-+#define RG_SIFSLV_BGR_EN (0x1<<0) //0:0
-+
-+//U3D_U2PHYAC1
-+#define RG_USB20_VRT_VREF_SEL (0x7<<28) //30:28
-+#define RG_USB20_TERM_VREF_SEL (0x7<<24) //26:24
-+#define RG_USB20_MPX_SEL (0xff<<16) //23:16
-+#define RG_USB20_MPX_OUT_SEL (0x3<<12) //13:12
-+#define RG_USB20_TX_PH_ROT_SEL (0x7<<8) //10:8
-+#define RG_USB20_USBPLL_ACCEN (0x1<<3) //3:3
-+#define RG_USB20_USBPLL_LF (0x1<<2) //2:2
-+#define RG_USB20_USBPLL_BR (0x1<<1) //1:1
-+#define RG_USB20_USBPLL_BP (0x1<<0) //0:0
-+
-+//U3D_U2PHYAC2
-+#define RG_SIFSLV_MAC_BANDGAP_EN (0x1<<17) //17:17
-+#define RG_SIFSLV_MAC_CHOPPER_EN (0x1<<16) //16:16
-+#define RG_USB20_CLKREF_REV (0xff<<0) //7:0
-+
-+//U3D_U2PHYACR0
-+#define RG_USB20_ICUSB_EN (0x1<<24) //24:24
-+#define RG_USB20_HSTX_SRCAL_EN (0x1<<23) //23:23
-+#define RG_USB20_HSTX_SRCTRL (0x7<<16) //18:16
-+#define RG_USB20_LS_CR (0x7<<12) //14:12
-+#define RG_USB20_FS_CR (0x7<<8) //10:8
-+#define RG_USB20_LS_SR (0x7<<4) //6:4
-+#define RG_USB20_FS_SR (0x7<<0) //2:0
-+
-+//U3D_U2PHYACR1
-+#define RG_USB20_INIT_SQ_EN_DG (0x3<<28) //29:28
-+#define RG_USB20_SQD (0x3<<24) //25:24
-+#define RG_USB20_HSTX_TMODE_SEL (0x3<<20) //21:20
-+#define RG_USB20_HSTX_TMODE_EN (0x1<<19) //19:19
-+#define RG_USB20_PHYD_MONEN (0x1<<18) //18:18
-+#define RG_USB20_INLPBK_EN (0x1<<17) //17:17
-+#define RG_USB20_CHIRP_EN (0x1<<16) //16:16
-+#define RG_USB20_DM_ABIST_SOURCE_EN (0x1<<15) //15:15
-+#define RG_USB20_DM_ABIST_SELE (0xf<<8) //11:8
-+#define RG_USB20_DP_ABIST_SOURCE_EN (0x1<<7) //7:7
-+#define RG_USB20_DP_ABIST_SELE (0xf<<0) //3:0
-+
-+//U3D_U2PHYACR2
-+#define RG_USB20_OTG_ABIST_SELE (0x7<<29) //31:29
-+#define RG_USB20_OTG_ABIST_EN (0x1<<28) //28:28
-+#define RG_USB20_OTG_VBUSCMP_EN (0x1<<27) //27:27
-+#define RG_USB20_OTG_VBUSTH (0x7<<24) //26:24
-+#define RG_USB20_DISC_FIT_EN (0x1<<22) //22:22
-+#define RG_USB20_DISCD (0x3<<20) //21:20
-+#define RG_USB20_DISCTH (0xf<<16) //19:16
-+#define RG_USB20_SQCAL_EN (0x1<<15) //15:15
-+#define RG_USB20_SQCAL (0xf<<8) //11:8
-+#define RG_USB20_SQTH (0xf<<0) //3:0
-+
-+//U3D_U2PHYACR3
-+#define RG_USB20_HSTX_DBIST (0xf<<28) //31:28
-+#define RG_USB20_HSTX_BIST_EN (0x1<<26) //26:26
-+#define RG_USB20_HSTX_I_EN_MODE (0x3<<24) //25:24
-+#define RG_USB20_HSRX_TMODE_EN (0x1<<23) //23:23
-+#define RG_USB20_HSRX_BIAS_EN_SEL (0x3<<20) //21:20
-+#define RG_USB20_USB11_TMODE_EN (0x1<<19) //19:19
-+#define RG_USB20_TMODE_FS_LS_TX_EN (0x1<<18) //18:18
-+#define RG_USB20_TMODE_FS_LS_RCV_EN (0x1<<17) //17:17
-+#define RG_USB20_TMODE_FS_LS_MODE (0x1<<16) //16:16
-+#define RG_USB20_HS_TERM_EN_MODE (0x3<<13) //14:13
-+#define RG_USB20_PUPD_BIST_EN (0x1<<12) //12:12
-+#define RG_USB20_EN_PU_DM (0x1<<11) //11:11
-+#define RG_USB20_EN_PD_DM (0x1<<10) //10:10
-+#define RG_USB20_EN_PU_DP (0x1<<9) //9:9
-+#define RG_USB20_EN_PD_DP (0x1<<8) //8:8
-+#define RG_USB20_PHY_REV (0xff<<0) //7:0
-+
-+//U3D_U2PHYACR4
-+#define RG_USB20_DP_100K_MODE (0x1<<18) //18:18
-+#define RG_USB20_DM_100K_EN (0x1<<17) //17:17
-+#define USB20_DP_100K_EN (0x1<<16) //16:16
-+#define USB20_GPIO_DM_I (0x1<<15) //15:15
-+#define USB20_GPIO_DP_I (0x1<<14) //14:14
-+#define USB20_GPIO_DM_OE (0x1<<13) //13:13
-+#define USB20_GPIO_DP_OE (0x1<<12) //12:12
-+#define RG_USB20_GPIO_CTL (0x1<<9) //9:9
-+#define USB20_GPIO_MODE (0x1<<8) //8:8
-+#define RG_USB20_TX_BIAS_EN (0x1<<5) //5:5
-+#define RG_USB20_TX_VCMPDN_EN (0x1<<4) //4:4
-+#define RG_USB20_HS_SQ_EN_MODE (0x3<<2) //3:2
-+#define RG_USB20_HS_RCV_EN_MODE (0x3<<0) //1:0
-+
-+//U3D_U2PHYAMON0
-+#define RGO_USB20_GPIO_DM_O (0x1<<1) //1:1
-+#define RGO_USB20_GPIO_DP_O (0x1<<0) //0:0
-+
-+//U3D_U2PHYDCR0
-+#define RG_USB20_CDR_TST (0x3<<30) //31:30
-+#define RG_USB20_GATED_ENB (0x1<<29) //29:29
-+#define RG_USB20_TESTMODE (0x3<<26) //27:26
-+#define RG_USB20_PLL_STABLE (0x1<<25) //25:25
-+#define RG_USB20_PLL_FORCE_ON (0x1<<24) //24:24
-+#define RG_USB20_PHYD_RESERVE (0xffff<<8) //23:8
-+#define RG_USB20_EBTHRLD (0x1<<7) //7:7
-+#define RG_USB20_EARLY_HSTX_I (0x1<<6) //6:6
-+#define RG_USB20_TX_TST (0x1<<5) //5:5
-+#define RG_USB20_NEGEDGE_ENB (0x1<<4) //4:4
-+#define RG_USB20_CDR_FILT (0xf<<0) //3:0
-+
-+//U3D_U2PHYDCR1
-+#define RG_USB20_PROBE_SEL (0xff<<24) //31:24
-+#define RG_USB20_DRVVBUS (0x1<<23) //23:23
-+#define RG_DEBUG_EN (0x1<<22) //22:22
-+#define RG_USB20_OTG_PROBE (0x3<<20) //21:20
-+#define RG_USB20_SW_PLLMODE (0x3<<18) //19:18
-+#define RG_USB20_BERTH (0x3<<16) //17:16
-+#define RG_USB20_LBMODE (0x3<<13) //14:13
-+#define RG_USB20_FORCE_TAP (0x1<<12) //12:12
-+#define RG_USB20_TAPSEL (0xfff<<0) //11:0
-+
-+//U3D_U2PHYDTM0
-+#define RG_UART_MODE (0x3<<30) //31:30
-+#define FORCE_UART_I (0x1<<29) //29:29
-+#define FORCE_UART_BIAS_EN (0x1<<28) //28:28
-+#define FORCE_UART_TX_OE (0x1<<27) //27:27
-+#define FORCE_UART_EN (0x1<<26) //26:26
-+#define FORCE_USB_CLKEN (0x1<<25) //25:25
-+#define FORCE_DRVVBUS (0x1<<24) //24:24
-+#define FORCE_DATAIN (0x1<<23) //23:23
-+#define FORCE_TXVALID (0x1<<22) //22:22
-+#define FORCE_DM_PULLDOWN (0x1<<21) //21:21
-+#define FORCE_DP_PULLDOWN (0x1<<20) //20:20
-+#define FORCE_XCVRSEL (0x1<<19) //19:19
-+#define FORCE_SUSPENDM (0x1<<18) //18:18
-+#define FORCE_TERMSEL (0x1<<17) //17:17
-+#define FORCE_OPMODE (0x1<<16) //16:16
-+#define UTMI_MUXSEL (0x1<<15) //15:15
-+#define RG_RESET (0x1<<14) //14:14
-+#define RG_DATAIN (0xf<<10) //13:10
-+#define RG_TXVALIDH (0x1<<9) //9:9
-+#define RG_TXVALID (0x1<<8) //8:8
-+#define RG_DMPULLDOWN (0x1<<7) //7:7
-+#define RG_DPPULLDOWN (0x1<<6) //6:6
-+#define RG_XCVRSEL (0x3<<4) //5:4
-+#define RG_SUSPENDM (0x1<<3) //3:3
-+#define RG_TERMSEL (0x1<<2) //2:2
-+#define RG_OPMODE (0x3<<0) //1:0
-+
-+//U3D_U2PHYDTM1
-+#define RG_USB20_PRBS7_EN (0x1<<31) //31:31
-+#define RG_USB20_PRBS7_BITCNT (0x3f<<24) //29:24
-+#define RG_USB20_CLK48M_EN (0x1<<23) //23:23
-+#define RG_USB20_CLK60M_EN (0x1<<22) //22:22
-+#define RG_UART_I (0x1<<19) //19:19
-+#define RG_UART_BIAS_EN (0x1<<18) //18:18
-+#define RG_UART_TX_OE (0x1<<17) //17:17
-+#define RG_UART_EN (0x1<<16) //16:16
-+#define FORCE_VBUSVALID (0x1<<13) //13:13
-+#define FORCE_SESSEND (0x1<<12) //12:12
-+#define FORCE_BVALID (0x1<<11) //11:11
-+#define FORCE_AVALID (0x1<<10) //10:10
-+#define FORCE_IDDIG (0x1<<9) //9:9
-+#define FORCE_IDPULLUP (0x1<<8) //8:8
-+#define RG_VBUSVALID (0x1<<5) //5:5
-+#define RG_SESSEND (0x1<<4) //4:4
-+#define RG_BVALID (0x1<<3) //3:3
-+#define RG_AVALID (0x1<<2) //2:2
-+#define RG_IDDIG (0x1<<1) //1:1
-+#define RG_IDPULLUP (0x1<<0) //0:0
-+
-+//U3D_U2PHYDMON0
-+#define RG_USB20_PRBS7_BERTH (0xff<<0) //7:0
-+
-+//U3D_U2PHYDMON1
-+#define USB20_UART_O (0x1<<31) //31:31
-+#define RGO_USB20_LB_PASS (0x1<<30) //30:30
-+#define RGO_USB20_LB_DONE (0x1<<29) //29:29
-+#define AD_USB20_BVALID (0x1<<28) //28:28
-+#define USB20_IDDIG (0x1<<27) //27:27
-+#define AD_USB20_VBUSVALID (0x1<<26) //26:26
-+#define AD_USB20_SESSEND (0x1<<25) //25:25
-+#define AD_USB20_AVALID (0x1<<24) //24:24
-+#define USB20_LINE_STATE (0x3<<22) //23:22
-+#define USB20_HST_DISCON (0x1<<21) //21:21
-+#define USB20_TX_READY (0x1<<20) //20:20
-+#define USB20_RX_ERROR (0x1<<19) //19:19
-+#define USB20_RX_ACTIVE (0x1<<18) //18:18
-+#define USB20_RX_VALIDH (0x1<<17) //17:17
-+#define USB20_RX_VALID (0x1<<16) //16:16
-+#define USB20_DATA_OUT (0xffff<<0) //15:0
-+
-+//U3D_U2PHYDMON2
-+#define RGO_TXVALID_CNT (0xff<<24) //31:24
-+#define RGO_RXACTIVE_CNT (0xff<<16) //23:16
-+#define RGO_USB20_LB_BERCNT (0xff<<8) //15:8
-+#define USB20_PROBE_OUT (0xff<<0) //7:0
-+
-+//U3D_U2PHYDMON3
-+#define RGO_USB20_PRBS7_ERRCNT (0xffff<<16) //31:16
-+#define RGO_USB20_PRBS7_DONE (0x1<<3) //3:3
-+#define RGO_USB20_PRBS7_LOCK (0x1<<2) //2:2
-+#define RGO_USB20_PRBS7_PASS (0x1<<1) //1:1
-+#define RGO_USB20_PRBS7_PASSTH (0x1<<0) //0:0
-+
-+//U3D_U2PHYBC12C
-+#define RG_SIFSLV_CHGDT_DEGLCH_CNT (0xf<<28) //31:28
-+#define RG_SIFSLV_CHGDT_CTRL_CNT (0xf<<24) //27:24
-+#define RG_SIFSLV_CHGDT_FORCE_MODE (0x1<<16) //16:16
-+#define RG_CHGDT_ISRC_LEV (0x3<<14) //15:14
-+#define RG_CHGDT_VDATSRC (0x1<<13) //13:13
-+#define RG_CHGDT_BGVREF_SEL (0x7<<10) //12:10
-+#define RG_CHGDT_RDVREF_SEL (0x3<<8) //9:8
-+#define RG_CHGDT_ISRC_DP (0x1<<7) //7:7
-+#define RG_SIFSLV_CHGDT_OPOUT_DM (0x1<<6) //6:6
-+#define RG_CHGDT_VDAT_DM (0x1<<5) //5:5
-+#define RG_CHGDT_OPOUT_DP (0x1<<4) //4:4
-+#define RG_SIFSLV_CHGDT_VDAT_DP (0x1<<3) //3:3
-+#define RG_SIFSLV_CHGDT_COMP_EN (0x1<<2) //2:2
-+#define RG_SIFSLV_CHGDT_OPDRV_EN (0x1<<1) //1:1
-+#define RG_CHGDT_EN (0x1<<0) //0:0
-+
-+//U3D_U2PHYBC12C1
-+#define RG_CHGDT_REV (0xff<<0) //7:0
-+
-+//U3D_REGFCOM
-+#define RG_PAGE (0xff<<24) //31:24
-+#define I2C_MODE (0x1<<16) //16:16
-+
-+
-+/* OFFSET */
-+
-+//U3D_U2PHYAC0
-+#define RG_USB20_USBPLL_DIVEN_OFST (28)
-+#define RG_USB20_USBPLL_CKCTRL_OFST (26)
-+#define RG_USB20_USBPLL_PREDIV_OFST (24)
-+#define RG_USB20_USBPLL_FORCE_ON_OFST (23)
-+#define RG_USB20_USBPLL_FBDIV_OFST (16)
-+#define RG_USB20_REF_EN_OFST (15)
-+#define RG_USB20_INTR_EN_OFST (14)
-+#define RG_USB20_BG_TRIM_OFST (8)
-+#define RG_USB20_BG_RBSEL_OFST (6)
-+#define RG_USB20_BG_RASEL_OFST (4)
-+#define RG_USB20_BGR_DIV_OFST (2)
-+#define RG_SIFSLV_CHP_EN_OFST (1)
-+#define RG_SIFSLV_BGR_EN_OFST (0)
-+
-+//U3D_U2PHYAC1
-+#define RG_USB20_VRT_VREF_SEL_OFST (28)
-+#define RG_USB20_TERM_VREF_SEL_OFST (24)
-+#define RG_USB20_MPX_SEL_OFST (16)
-+#define RG_USB20_MPX_OUT_SEL_OFST (12)
-+#define RG_USB20_TX_PH_ROT_SEL_OFST (8)
-+#define RG_USB20_USBPLL_ACCEN_OFST (3)
-+#define RG_USB20_USBPLL_LF_OFST (2)
-+#define RG_USB20_USBPLL_BR_OFST (1)
-+#define RG_USB20_USBPLL_BP_OFST (0)
-+
-+//U3D_U2PHYAC2
-+#define RG_SIFSLV_MAC_BANDGAP_EN_OFST (17)
-+#define RG_SIFSLV_MAC_CHOPPER_EN_OFST (16)
-+#define RG_USB20_CLKREF_REV_OFST (0)
-+
-+//U3D_U2PHYACR0
-+#define RG_USB20_ICUSB_EN_OFST (24)
-+#define RG_USB20_HSTX_SRCAL_EN_OFST (23)
-+#define RG_USB20_HSTX_SRCTRL_OFST (16)
-+#define RG_USB20_LS_CR_OFST (12)
-+#define RG_USB20_FS_CR_OFST (8)
-+#define RG_USB20_LS_SR_OFST (4)
-+#define RG_USB20_FS_SR_OFST (0)
-+
-+//U3D_U2PHYACR1
-+#define RG_USB20_INIT_SQ_EN_DG_OFST (28)
-+#define RG_USB20_SQD_OFST (24)
-+#define RG_USB20_HSTX_TMODE_SEL_OFST (20)
-+#define RG_USB20_HSTX_TMODE_EN_OFST (19)
-+#define RG_USB20_PHYD_MONEN_OFST (18)
-+#define RG_USB20_INLPBK_EN_OFST (17)
-+#define RG_USB20_CHIRP_EN_OFST (16)
-+#define RG_USB20_DM_ABIST_SOURCE_EN_OFST (15)
-+#define RG_USB20_DM_ABIST_SELE_OFST (8)
-+#define RG_USB20_DP_ABIST_SOURCE_EN_OFST (7)
-+#define RG_USB20_DP_ABIST_SELE_OFST (0)
-+
-+//U3D_U2PHYACR2
-+#define RG_USB20_OTG_ABIST_SELE_OFST (29)
-+#define RG_USB20_OTG_ABIST_EN_OFST (28)
-+#define RG_USB20_OTG_VBUSCMP_EN_OFST (27)
-+#define RG_USB20_OTG_VBUSTH_OFST (24)
-+#define RG_USB20_DISC_FIT_EN_OFST (22)
-+#define RG_USB20_DISCD_OFST (20)
-+#define RG_USB20_DISCTH_OFST (16)
-+#define RG_USB20_SQCAL_EN_OFST (15)
-+#define RG_USB20_SQCAL_OFST (8)
-+#define RG_USB20_SQTH_OFST (0)
-+
-+//U3D_U2PHYACR3
-+#define RG_USB20_HSTX_DBIST_OFST (28)
-+#define RG_USB20_HSTX_BIST_EN_OFST (26)
-+#define RG_USB20_HSTX_I_EN_MODE_OFST (24)
-+#define RG_USB20_HSRX_TMODE_EN_OFST (23)
-+#define RG_USB20_HSRX_BIAS_EN_SEL_OFST (20)
-+#define RG_USB20_USB11_TMODE_EN_OFST (19)
-+#define RG_USB20_TMODE_FS_LS_TX_EN_OFST (18)
-+#define RG_USB20_TMODE_FS_LS_RCV_EN_OFST (17)
-+#define RG_USB20_TMODE_FS_LS_MODE_OFST (16)
-+#define RG_USB20_HS_TERM_EN_MODE_OFST (13)
-+#define RG_USB20_PUPD_BIST_EN_OFST (12)
-+#define RG_USB20_EN_PU_DM_OFST (11)
-+#define RG_USB20_EN_PD_DM_OFST (10)
-+#define RG_USB20_EN_PU_DP_OFST (9)
-+#define RG_USB20_EN_PD_DP_OFST (8)
-+#define RG_USB20_PHY_REV_OFST (0)
-+
-+//U3D_U2PHYACR4
-+#define RG_USB20_DP_100K_MODE_OFST (18)
-+#define RG_USB20_DM_100K_EN_OFST (17)
-+#define USB20_DP_100K_EN_OFST (16)
-+#define USB20_GPIO_DM_I_OFST (15)
-+#define USB20_GPIO_DP_I_OFST (14)
-+#define USB20_GPIO_DM_OE_OFST (13)
-+#define USB20_GPIO_DP_OE_OFST (12)
-+#define RG_USB20_GPIO_CTL_OFST (9)
-+#define USB20_GPIO_MODE_OFST (8)
-+#define RG_USB20_TX_BIAS_EN_OFST (5)
-+#define RG_USB20_TX_VCMPDN_EN_OFST (4)
-+#define RG_USB20_HS_SQ_EN_MODE_OFST (2)
-+#define RG_USB20_HS_RCV_EN_MODE_OFST (0)
-+
-+//U3D_U2PHYAMON0
-+#define RGO_USB20_GPIO_DM_O_OFST (1)
-+#define RGO_USB20_GPIO_DP_O_OFST (0)
-+
-+//U3D_U2PHYDCR0
-+#define RG_USB20_CDR_TST_OFST (30)
-+#define RG_USB20_GATED_ENB_OFST (29)
-+#define RG_USB20_TESTMODE_OFST (26)
-+#define RG_USB20_PLL_STABLE_OFST (25)
-+#define RG_USB20_PLL_FORCE_ON_OFST (24)
-+#define RG_USB20_PHYD_RESERVE_OFST (8)
-+#define RG_USB20_EBTHRLD_OFST (7)
-+#define RG_USB20_EARLY_HSTX_I_OFST (6)
-+#define RG_USB20_TX_TST_OFST (5)
-+#define RG_USB20_NEGEDGE_ENB_OFST (4)
-+#define RG_USB20_CDR_FILT_OFST (0)
-+
-+//U3D_U2PHYDCR1
-+#define RG_USB20_PROBE_SEL_OFST (24)
-+#define RG_USB20_DRVVBUS_OFST (23)
-+#define RG_DEBUG_EN_OFST (22)
-+#define RG_USB20_OTG_PROBE_OFST (20)
-+#define RG_USB20_SW_PLLMODE_OFST (18)
-+#define RG_USB20_BERTH_OFST (16)
-+#define RG_USB20_LBMODE_OFST (13)
-+#define RG_USB20_FORCE_TAP_OFST (12)
-+#define RG_USB20_TAPSEL_OFST (0)
-+
-+//U3D_U2PHYDTM0
-+#define RG_UART_MODE_OFST (30)
-+#define FORCE_UART_I_OFST (29)
-+#define FORCE_UART_BIAS_EN_OFST (28)
-+#define FORCE_UART_TX_OE_OFST (27)
-+#define FORCE_UART_EN_OFST (26)
-+#define FORCE_USB_CLKEN_OFST (25)
-+#define FORCE_DRVVBUS_OFST (24)
-+#define FORCE_DATAIN_OFST (23)
-+#define FORCE_TXVALID_OFST (22)
-+#define FORCE_DM_PULLDOWN_OFST (21)
-+#define FORCE_DP_PULLDOWN_OFST (20)
-+#define FORCE_XCVRSEL_OFST (19)
-+#define FORCE_SUSPENDM_OFST (18)
-+#define FORCE_TERMSEL_OFST (17)
-+#define FORCE_OPMODE_OFST (16)
-+#define UTMI_MUXSEL_OFST (15)
-+#define RG_RESET_OFST (14)
-+#define RG_DATAIN_OFST (10)
-+#define RG_TXVALIDH_OFST (9)
-+#define RG_TXVALID_OFST (8)
-+#define RG_DMPULLDOWN_OFST (7)
-+#define RG_DPPULLDOWN_OFST (6)
-+#define RG_XCVRSEL_OFST (4)
-+#define RG_SUSPENDM_OFST (3)
-+#define RG_TERMSEL_OFST (2)
-+#define RG_OPMODE_OFST (0)
-+
-+//U3D_U2PHYDTM1
-+#define RG_USB20_PRBS7_EN_OFST (31)
-+#define RG_USB20_PRBS7_BITCNT_OFST (24)
-+#define RG_USB20_CLK48M_EN_OFST (23)
-+#define RG_USB20_CLK60M_EN_OFST (22)
-+#define RG_UART_I_OFST (19)
-+#define RG_UART_BIAS_EN_OFST (18)
-+#define RG_UART_TX_OE_OFST (17)
-+#define RG_UART_EN_OFST (16)
-+#define FORCE_VBUSVALID_OFST (13)
-+#define FORCE_SESSEND_OFST (12)
-+#define FORCE_BVALID_OFST (11)
-+#define FORCE_AVALID_OFST (10)
-+#define FORCE_IDDIG_OFST (9)
-+#define FORCE_IDPULLUP_OFST (8)
-+#define RG_VBUSVALID_OFST (5)
-+#define RG_SESSEND_OFST (4)
-+#define RG_BVALID_OFST (3)
-+#define RG_AVALID_OFST (2)
-+#define RG_IDDIG_OFST (1)
-+#define RG_IDPULLUP_OFST (0)
-+
-+//U3D_U2PHYDMON0
-+#define RG_USB20_PRBS7_BERTH_OFST (0)
-+
-+//U3D_U2PHYDMON1
-+#define USB20_UART_O_OFST (31)
-+#define RGO_USB20_LB_PASS_OFST (30)
-+#define RGO_USB20_LB_DONE_OFST (29)
-+#define AD_USB20_BVALID_OFST (28)
-+#define USB20_IDDIG_OFST (27)
-+#define AD_USB20_VBUSVALID_OFST (26)
-+#define AD_USB20_SESSEND_OFST (25)
-+#define AD_USB20_AVALID_OFST (24)
-+#define USB20_LINE_STATE_OFST (22)
-+#define USB20_HST_DISCON_OFST (21)
-+#define USB20_TX_READY_OFST (20)
-+#define USB20_RX_ERROR_OFST (19)
-+#define USB20_RX_ACTIVE_OFST (18)
-+#define USB20_RX_VALIDH_OFST (17)
-+#define USB20_RX_VALID_OFST (16)
-+#define USB20_DATA_OUT_OFST (0)
-+
-+//U3D_U2PHYDMON2
-+#define RGO_TXVALID_CNT_OFST (24)
-+#define RGO_RXACTIVE_CNT_OFST (16)
-+#define RGO_USB20_LB_BERCNT_OFST (8)
-+#define USB20_PROBE_OUT_OFST (0)
-+
-+//U3D_U2PHYDMON3
-+#define RGO_USB20_PRBS7_ERRCNT_OFST (16)
-+#define RGO_USB20_PRBS7_DONE_OFST (3)
-+#define RGO_USB20_PRBS7_LOCK_OFST (2)
-+#define RGO_USB20_PRBS7_PASS_OFST (1)
-+#define RGO_USB20_PRBS7_PASSTH_OFST (0)
-+
-+//U3D_U2PHYBC12C
-+#define RG_SIFSLV_CHGDT_DEGLCH_CNT_OFST (28)
-+#define RG_SIFSLV_CHGDT_CTRL_CNT_OFST (24)
-+#define RG_SIFSLV_CHGDT_FORCE_MODE_OFST (16)
-+#define RG_CHGDT_ISRC_LEV_OFST (14)
-+#define RG_CHGDT_VDATSRC_OFST (13)
-+#define RG_CHGDT_BGVREF_SEL_OFST (10)
-+#define RG_CHGDT_RDVREF_SEL_OFST (8)
-+#define RG_CHGDT_ISRC_DP_OFST (7)
-+#define RG_SIFSLV_CHGDT_OPOUT_DM_OFST (6)
-+#define RG_CHGDT_VDAT_DM_OFST (5)
-+#define RG_CHGDT_OPOUT_DP_OFST (4)
-+#define RG_SIFSLV_CHGDT_VDAT_DP_OFST (3)
-+#define RG_SIFSLV_CHGDT_COMP_EN_OFST (2)
-+#define RG_SIFSLV_CHGDT_OPDRV_EN_OFST (1)
-+#define RG_CHGDT_EN_OFST (0)
-+
-+//U3D_U2PHYBC12C1
-+#define RG_CHGDT_REV_OFST (0)
-+
-+//U3D_REGFCOM
-+#define RG_PAGE_OFST (24)
-+#define I2C_MODE_OFST (16)
-+
-+
-+///////////////////////////////////////////////////////////////////////////////
-+
-+struct u3phya_reg {
-+ //0x0
-+ PHY_LE32 reg0;
-+ PHY_LE32 reg1;
-+ PHY_LE32 reg2;
-+ PHY_LE32 reg3;
-+ //0x10
-+ PHY_LE32 reg4;
-+ PHY_LE32 reg5;
-+ PHY_LE32 reg6;
-+ PHY_LE32 reg7;
-+ //0x20
-+ PHY_LE32 reg8;
-+ PHY_LE32 reg9;
-+ PHY_LE32 rega;
-+ PHY_LE32 regb;
-+ //0x30
-+ PHY_LE32 regc;
-+ PHY_LE32 regd;
-+ PHY_LE32 rege;
-+};
-+
-+//U3D_reg0
-+#define RG_SSUSB_BGR_EN (0x1<<31) //31:31
-+#define RG_SSUSB_CHPEN (0x1<<30) //30:30
-+#define RG_SSUSB_BG_DIV (0x3<<28) //29:28
-+#define RG_SSUSB_INTR_EN (0x1<<26) //26:26
-+#define RG_SSUSB_MPX_OUT_SEL (0x3<<24) //25:24
-+#define RG_SSUSB_MPX_SEL (0xff<<16) //23:16
-+#define RG_SSUSB_REF_EN (0x1<<15) //15:15
-+#define RG_SSUSB_VRT_VREF_SEL (0xf<<11) //14:11
-+#define RG_SSUSB_BG_RASEL (0x3<<9) //10:9
-+#define RG_SSUSB_BG_RBSEL (0x3<<7) //8:7
-+#define RG_SSUSB_BG_MONEN (0x1<<6) //6:6
-+#define RG_PCIE_CLKDRV_OFFSET (0x3<<0) //1:0
-+
-+//U3D_reg1
-+#define RG_PCIE_CLKDRV_SLEW (0x3<<30) //31:30
-+#define RG_PCIE_CLKDRV_AMP (0x7<<27) //29:27
-+#define RG_SSUSB_XTAL_TST_A2DCK_EN (0x1<<26) //26:26
-+#define RG_SSUSB_XTAL_MON_EN (0x1<<25) //25:25
-+#define RG_SSUSB_XTAL_HYS (0x1<<24) //24:24
-+#define RG_SSUSB_XTAL_TOP_RESERVE (0xffff<<8) //23:8
-+#define RG_SSUSB_SYSPLL_RESERVE (0xf<<4) //7:4
-+#define RG_SSUSB_SYSPLL_FBSEL (0x3<<2) //3:2
-+#define RG_SSUSB_SYSPLL_PREDIV (0x3<<0) //1:0
-+
-+//U3D_reg2
-+#define RG_SSUSB_SYSPLL_LF (0x1<<31) //31:31
-+#define RG_SSUSB_SYSPLL_FBDIV (0x7f<<24) //30:24
-+#define RG_SSUSB_SYSPLL_POSDIV (0x3<<22) //23:22
-+#define RG_SSUSB_SYSPLL_VCO_DIV_SEL (0x1<<21) //21:21
-+#define RG_SSUSB_SYSPLL_BLP (0x1<<20) //20:20
-+#define RG_SSUSB_SYSPLL_BP (0x1<<19) //19:19
-+#define RG_SSUSB_SYSPLL_BR (0x1<<18) //18:18
-+#define RG_SSUSB_SYSPLL_BC (0x1<<17) //17:17
-+#define RG_SSUSB_SYSPLL_DIVEN (0x7<<14) //16:14
-+#define RG_SSUSB_SYSPLL_FPEN (0x1<<13) //13:13
-+#define RG_SSUSB_SYSPLL_MONCK_EN (0x1<<12) //12:12
-+#define RG_SSUSB_SYSPLL_MONVC_EN (0x1<<11) //11:11
-+#define RG_SSUSB_SYSPLL_MONREF_EN (0x1<<10) //10:10
-+#define RG_SSUSB_SYSPLL_VOD_EN (0x1<<9) //9:9
-+#define RG_SSUSB_SYSPLL_CK_SEL (0x1<<8) //8:8
-+
-+//U3D_reg3
-+#define RG_SSUSB_SYSPLL_TOP_RESERVE (0xffff<<16) //31:16
-+
-+//U3D_reg4
-+#define RG_SSUSB_SYSPLL_PCW_NCPO (0x7fffffff<<1) //31:1
-+
-+//U3D_reg5
-+#define RG_SSUSB_SYSPLL_DDS_PI_C (0x7<<29) //31:29
-+#define RG_SSUSB_SYSPLL_DDS_HF_EN (0x1<<28) //28:28
-+#define RG_SSUSB_SYSPLL_DDS_PREDIV2 (0x1<<27) //27:27
-+#define RG_SSUSB_SYSPLL_DDS_POSTDIV2 (0x1<<26) //26:26
-+#define RG_SSUSB_SYSPLL_DDS_PI_PL_EN (0x1<<25) //25:25
-+#define RG_SSUSB_SYSPLL_DDS_PI_RST_SEL (0x1<<24) //24:24
-+#define RG_SSUSB_SYSPLL_DDS_MONEN (0x1<<23) //23:23
-+#define RG_SSUSB_SYSPLL_DDS_LPF_EN (0x1<<22) //22:22
-+#define RG_SSUSB_SYSPLL_CLK_PH_INV (0x1<<21) //21:21
-+#define RG_SSUSB_SYSPLL_DDS_SEL_EXT (0x1<<20) //20:20
-+#define RG_SSUSB_SYSPLL_DDS_DMY (0xffff<<0) //15:0
-+
-+//U3D_reg6
-+#define RG_SSUSB_TX250MCK_INVB (0x1<<31) //31:31
-+#define RG_SSUSB_IDRV_ITAILOP_EN (0x1<<30) //30:30
-+#define RG_SSUSB_IDRV_CALIB (0x3f<<24) //29:24
-+#define RG_SSUSB_TX_R50_FON (0x1<<23) //23:23
-+#define RG_SSUSB_TX_SR (0x7<<20) //22:20
-+#define RG_SSUSB_TX_EIDLE_CM (0xf<<16) //19:16
-+#define RG_SSUSB_RXDET_RSEL (0x3<<14) //15:14
-+#define RG_SSUSB_RXDET_VTHSEL (0x3<<12) //13:12
-+#define RG_SSUSB_CKMON_EN (0x1<<11) //11:11
-+#define RG_SSUSB_CKMON_SEL (0x7<<8) //10:8
-+#define RG_SSUSB_TX_VLMON_EN (0x1<<7) //7:7
-+#define RG_SSUSB_TX_VLMON_SEL (0x1<<6) //6:6
-+#define RG_SSUSB_RXLBTX_EN (0x1<<5) //5:5
-+#define RG_SSUSB_TXLBRX_EN (0x1<<4) //4:4
-+
-+//U3D_reg7
-+#define RG_SSUSB_RESERVE (0xfffff<<12) //31:12
-+#define RG_SSUSB_PLL_CKCTRL (0x3<<10) //11:10
-+#define RG_SSUSB_PLL_POSDIV (0x3<<8) //9:8
-+#define RG_SSUSB_PLL_AUTOK_LOAD (0x1<<7) //7:7
-+#define RG_SSUSB_PLL_LOAD_RSTB (0x1<<6) //6:6
-+#define RG_SSUSB_PLL_EP_EN (0x1<<5) //5:5
-+#define RG_SSUSB_PLL_VOD_EN (0x1<<4) //4:4
-+#define RG_SSUSB_PLL_V11_EN (0x1<<3) //3:3
-+#define RG_SSUSB_PLL_MONREF_EN (0x1<<2) //2:2
-+#define RG_SSUSB_PLL_MONCK_EN (0x1<<1) //1:1
-+#define RG_SSUSB_PLL_MONVC_EN (0x1<<0) //0:0
-+
-+//U3D_reg8
-+#define RG_SSUSB_PLL_RESERVE (0xffff<<0) //15:0
-+
-+//U3D_reg9
-+#define RG_SSUSB_PLL_DDS_DMY (0xffff<<16) //31:16
-+#define RG_SSUSB_PLL_SSC_PRD (0xffff<<0) //15:0
-+
-+//U3D_regA
-+#define RG_SSUSB_PLL_SSC_PHASE_INI (0x1<<31) //31:31
-+#define RG_SSUSB_PLL_SSC_TRI_EN (0x1<<30) //30:30
-+#define RG_SSUSB_PLL_CLK_PH_INV (0x1<<29) //29:29
-+#define RG_SSUSB_PLL_DDS_LPF_EN (0x1<<28) //28:28
-+#define RG_SSUSB_PLL_DDS_VADJ (0x7<<21) //23:21
-+#define RG_SSUSB_PLL_DDS_MONEN (0x1<<20) //20:20
-+#define RG_SSUSB_PLL_DDS_PS_VADJ (0x7<<17) //19:17
-+#define RG_SSUSB_PLL_DDS_SEL_EXT (0x1<<16) //16:16
-+#define RG_SSUSB_CDR_PD_DIV_BYPASS (0x1<<15) //15:15
-+#define RG_SSUSB_CDR_PD_DIV_SEL (0x1<<14) //14:14
-+#define RG_SSUSB_CDR_CPBIAS_SEL (0x1<<13) //13:13
-+#define RG_SSUSB_CDR_OSCDET_EN (0x1<<12) //12:12
-+#define RG_SSUSB_CDR_MONMUX (0x1<<11) //11:11
-+#define RG_SSUSB_CDR_CKCTRL (0x3<<9) //10:9
-+#define RG_SSUSB_CDR_ACCEN (0x1<<8) //8:8
-+#define RG_SSUSB_CDR_BYPASS (0x3<<6) //7:6
-+#define RG_SSUSB_CDR_PI_SLEW (0x3<<4) //5:4
-+#define RG_SSUSB_CDR_EPEN (0x1<<3) //3:3
-+#define RG_SSUSB_CDR_AUTOK_LOAD (0x1<<2) //2:2
-+#define RG_SSUSB_CDR_LOAD_RSTB (0x1<<1) //1:1
-+#define RG_SSUSB_CDR_MONEN (0x1<<0) //0:0
-+
-+//U3D_regB
-+#define RG_SSUSB_CDR_MONEN_DIG (0x1<<31) //31:31
-+#define RG_SSUSB_CDR_REGOD (0x3<<29) //30:29
-+#define RG_SSUSB_RX_DAC_EN (0x1<<26) //26:26
-+#define RG_SSUSB_RX_DAC_PWD (0x1<<25) //25:25
-+#define RG_SSUSB_EQ_CURSEL (0x1<<24) //24:24
-+#define RG_SSUSB_RX_DAC_MUX (0x1f<<19) //23:19
-+#define RG_SSUSB_RX_R2T_EN (0x1<<18) //18:18
-+#define RG_SSUSB_RX_T2R_EN (0x1<<17) //17:17
-+#define RG_SSUSB_RX_50_LOWER (0x7<<14) //16:14
-+#define RG_SSUSB_RX_50_TAR (0x3<<12) //13:12
-+#define RG_SSUSB_RX_SW_CTRL (0xf<<7) //10:7
-+#define RG_PCIE_SIGDET_VTH (0x3<<5) //6:5
-+#define RG_PCIE_SIGDET_LPF (0x3<<3) //4:3
-+#define RG_SSUSB_LFPS_MON_EN (0x1<<2) //2:2
-+
-+//U3D_regC
-+#define RG_SSUSB_RXAFE_DCMON_SEL (0xf<<28) //31:28
-+#define RG_SSUSB_CDR_RESERVE (0xff<<16) //23:16
-+#define RG_SSUSB_RXAFE_RESERVE (0xff<<8) //15:8
-+#define RG_PCIE_RX_RESERVE (0xff<<0) //7:0
-+
-+//U3D_redD
-+#define RGS_SSUSB_CDR_NO_OSC (0x1<<8) //8:8
-+#define RGS_SSUSB_RX_DEBUG_RESERVE (0xff<<0) //7:0
-+
-+//U3D_regE
-+#define RG_SSUSB_INT_BIAS_SEL (0x1<<4) //4:4
-+#define RG_SSUSB_EXT_BIAS_SEL (0x1<<3) //3:3
-+#define RG_SSUSB_RX_P1_ENTRY_PASS (0x1<<2) //2:2
-+#define RG_SSUSB_RX_PD_RST (0x1<<1) //1:1
-+#define RG_SSUSB_RX_PD_RST_PASS (0x1<<0) //0:0
-+
-+
-+/* OFFSET */
-+
-+//U3D_reg0
-+#define RG_SSUSB_BGR_EN_OFST (31)
-+#define RG_SSUSB_CHPEN_OFST (30)
-+#define RG_SSUSB_BG_DIV_OFST (28)
-+#define RG_SSUSB_INTR_EN_OFST (26)
-+#define RG_SSUSB_MPX_OUT_SEL_OFST (24)
-+#define RG_SSUSB_MPX_SEL_OFST (16)
-+#define RG_SSUSB_REF_EN_OFST (15)
-+#define RG_SSUSB_VRT_VREF_SEL_OFST (11)
-+#define RG_SSUSB_BG_RASEL_OFST (9)
-+#define RG_SSUSB_BG_RBSEL_OFST (7)
-+#define RG_SSUSB_BG_MONEN_OFST (6)
-+#define RG_PCIE_CLKDRV_OFFSET_OFST (0)
-+
-+//U3D_reg1
-+#define RG_PCIE_CLKDRV_SLEW_OFST (30)
-+#define RG_PCIE_CLKDRV_AMP_OFST (27)
-+#define RG_SSUSB_XTAL_TST_A2DCK_EN_OFST (26)
-+#define RG_SSUSB_XTAL_MON_EN_OFST (25)
-+#define RG_SSUSB_XTAL_HYS_OFST (24)
-+#define RG_SSUSB_XTAL_TOP_RESERVE_OFST (8)
-+#define RG_SSUSB_SYSPLL_RESERVE_OFST (4)
-+#define RG_SSUSB_SYSPLL_FBSEL_OFST (2)
-+#define RG_SSUSB_SYSPLL_PREDIV_OFST (0)
-+
-+//U3D_reg2
-+#define RG_SSUSB_SYSPLL_LF_OFST (31)
-+#define RG_SSUSB_SYSPLL_FBDIV_OFST (24)
-+#define RG_SSUSB_SYSPLL_POSDIV_OFST (22)
-+#define RG_SSUSB_SYSPLL_VCO_DIV_SEL_OFST (21)
-+#define RG_SSUSB_SYSPLL_BLP_OFST (20)
-+#define RG_SSUSB_SYSPLL_BP_OFST (19)
-+#define RG_SSUSB_SYSPLL_BR_OFST (18)
-+#define RG_SSUSB_SYSPLL_BC_OFST (17)
-+#define RG_SSUSB_SYSPLL_DIVEN_OFST (14)
-+#define RG_SSUSB_SYSPLL_FPEN_OFST (13)
-+#define RG_SSUSB_SYSPLL_MONCK_EN_OFST (12)
-+#define RG_SSUSB_SYSPLL_MONVC_EN_OFST (11)
-+#define RG_SSUSB_SYSPLL_MONREF_EN_OFST (10)
-+#define RG_SSUSB_SYSPLL_VOD_EN_OFST (9)
-+#define RG_SSUSB_SYSPLL_CK_SEL_OFST (8)
-+
-+//U3D_reg3
-+#define RG_SSUSB_SYSPLL_TOP_RESERVE_OFST (16)
-+
-+//U3D_reg4
-+#define RG_SSUSB_SYSPLL_PCW_NCPO_OFST (1)
-+
-+//U3D_reg5
-+#define RG_SSUSB_SYSPLL_DDS_PI_C_OFST (29)
-+#define RG_SSUSB_SYSPLL_DDS_HF_EN_OFST (28)
-+#define RG_SSUSB_SYSPLL_DDS_PREDIV2_OFST (27)
-+#define RG_SSUSB_SYSPLL_DDS_POSTDIV2_OFST (26)
-+#define RG_SSUSB_SYSPLL_DDS_PI_PL_EN_OFST (25)
-+#define RG_SSUSB_SYSPLL_DDS_PI_RST_SEL_OFST (24)
-+#define RG_SSUSB_SYSPLL_DDS_MONEN_OFST (23)
-+#define RG_SSUSB_SYSPLL_DDS_LPF_EN_OFST (22)
-+#define RG_SSUSB_SYSPLL_CLK_PH_INV_OFST (21)
-+#define RG_SSUSB_SYSPLL_DDS_SEL_EXT_OFST (20)
-+#define RG_SSUSB_SYSPLL_DDS_DMY_OFST (0)
-+
-+//U3D_reg6
-+#define RG_SSUSB_TX250MCK_INVB_OFST (31)
-+#define RG_SSUSB_IDRV_ITAILOP_EN_OFST (30)
-+#define RG_SSUSB_IDRV_CALIB_OFST (24)
-+#define RG_SSUSB_TX_R50_FON_OFST (23)
-+#define RG_SSUSB_TX_SR_OFST (20)
-+#define RG_SSUSB_TX_EIDLE_CM_OFST (16)
-+#define RG_SSUSB_RXDET_RSEL_OFST (14)
-+#define RG_SSUSB_RXDET_VTHSEL_OFST (12)
-+#define RG_SSUSB_CKMON_EN_OFST (11)
-+#define RG_SSUSB_CKMON_SEL_OFST (8)
-+#define RG_SSUSB_TX_VLMON_EN_OFST (7)
-+#define RG_SSUSB_TX_VLMON_SEL_OFST (6)
-+#define RG_SSUSB_RXLBTX_EN_OFST (5)
-+#define RG_SSUSB_TXLBRX_EN_OFST (4)
-+
-+//U3D_reg7
-+#define RG_SSUSB_RESERVE_OFST (12)
-+#define RG_SSUSB_PLL_CKCTRL_OFST (10)
-+#define RG_SSUSB_PLL_POSDIV_OFST (8)
-+#define RG_SSUSB_PLL_AUTOK_LOAD_OFST (7)
-+#define RG_SSUSB_PLL_LOAD_RSTB_OFST (6)
-+#define RG_SSUSB_PLL_EP_EN_OFST (5)
-+#define RG_SSUSB_PLL_VOD_EN_OFST (4)
-+#define RG_SSUSB_PLL_V11_EN_OFST (3)
-+#define RG_SSUSB_PLL_MONREF_EN_OFST (2)
-+#define RG_SSUSB_PLL_MONCK_EN_OFST (1)
-+#define RG_SSUSB_PLL_MONVC_EN_OFST (0)
-+
-+//U3D_reg8
-+#define RG_SSUSB_PLL_RESERVE_OFST (0)
-+
-+//U3D_reg9
-+#define RG_SSUSB_PLL_DDS_DMY_OFST (16)
-+#define RG_SSUSB_PLL_SSC_PRD_OFST (0)
-+
-+//U3D_regA
-+#define RG_SSUSB_PLL_SSC_PHASE_INI_OFST (31)
-+#define RG_SSUSB_PLL_SSC_TRI_EN_OFST (30)
-+#define RG_SSUSB_PLL_CLK_PH_INV_OFST (29)
-+#define RG_SSUSB_PLL_DDS_LPF_EN_OFST (28)
-+#define RG_SSUSB_PLL_DDS_VADJ_OFST (21)
-+#define RG_SSUSB_PLL_DDS_MONEN_OFST (20)
-+#define RG_SSUSB_PLL_DDS_PS_VADJ_OFST (17)
-+#define RG_SSUSB_PLL_DDS_SEL_EXT_OFST (16)
-+#define RG_SSUSB_CDR_PD_DIV_BYPASS_OFST (15)
-+#define RG_SSUSB_CDR_PD_DIV_SEL_OFST (14)
-+#define RG_SSUSB_CDR_CPBIAS_SEL_OFST (13)
-+#define RG_SSUSB_CDR_OSCDET_EN_OFST (12)
-+#define RG_SSUSB_CDR_MONMUX_OFST (11)
-+#define RG_SSUSB_CDR_CKCTRL_OFST (9)
-+#define RG_SSUSB_CDR_ACCEN_OFST (8)
-+#define RG_SSUSB_CDR_BYPASS_OFST (6)
-+#define RG_SSUSB_CDR_PI_SLEW_OFST (4)
-+#define RG_SSUSB_CDR_EPEN_OFST (3)
-+#define RG_SSUSB_CDR_AUTOK_LOAD_OFST (2)
-+#define RG_SSUSB_CDR_LOAD_RSTB_OFST (1)
-+#define RG_SSUSB_CDR_MONEN_OFST (0)
-+
-+//U3D_regB
-+#define RG_SSUSB_CDR_MONEN_DIG_OFST (31)
-+#define RG_SSUSB_CDR_REGOD_OFST (29)
-+#define RG_SSUSB_RX_DAC_EN_OFST (26)
-+#define RG_SSUSB_RX_DAC_PWD_OFST (25)
-+#define RG_SSUSB_EQ_CURSEL_OFST (24)
-+#define RG_SSUSB_RX_DAC_MUX_OFST (19)
-+#define RG_SSUSB_RX_R2T_EN_OFST (18)
-+#define RG_SSUSB_RX_T2R_EN_OFST (17)
-+#define RG_SSUSB_RX_50_LOWER_OFST (14)
-+#define RG_SSUSB_RX_50_TAR_OFST (12)
-+#define RG_SSUSB_RX_SW_CTRL_OFST (7)
-+#define RG_PCIE_SIGDET_VTH_OFST (5)
-+#define RG_PCIE_SIGDET_LPF_OFST (3)
-+#define RG_SSUSB_LFPS_MON_EN_OFST (2)
-+
-+//U3D_regC
-+#define RG_SSUSB_RXAFE_DCMON_SEL_OFST (28)
-+#define RG_SSUSB_CDR_RESERVE_OFST (16)
-+#define RG_SSUSB_RXAFE_RESERVE_OFST (8)
-+#define RG_PCIE_RX_RESERVE_OFST (0)
-+
-+//U3D_redD
-+#define RGS_SSUSB_CDR_NO_OSC_OFST (8)
-+#define RGS_SSUSB_RX_DEBUG_RESERVE_OFST (0)
-+
-+//U3D_regE
-+#define RG_SSUSB_INT_BIAS_SEL_OFST (4)
-+#define RG_SSUSB_EXT_BIAS_SEL_OFST (3)
-+#define RG_SSUSB_RX_P1_ENTRY_PASS_OFST (2)
-+#define RG_SSUSB_RX_PD_RST_OFST (1)
-+#define RG_SSUSB_RX_PD_RST_PASS_OFST (0)
-+
-+///////////////////////////////////////////////////////////////////////////////
-+
-+struct u3phya_da_reg {
-+ //0x0
-+ PHY_LE32 reg0;
-+ PHY_LE32 reg1;
-+ PHY_LE32 reg4;
-+ PHY_LE32 reg5;
-+ //0x10
-+ PHY_LE32 reg6;
-+ PHY_LE32 reg7;
-+ PHY_LE32 reg8;
-+ PHY_LE32 reg9;
-+ //0x20
-+ PHY_LE32 reg10;
-+ PHY_LE32 reg12;
-+ PHY_LE32 reg13;
-+ PHY_LE32 reg14;
-+ //0x30
-+ PHY_LE32 reg15;
-+ PHY_LE32 reg16;
-+ PHY_LE32 reg19;
-+ PHY_LE32 reg20;
-+ //0x40
-+ PHY_LE32 reg21;
-+ PHY_LE32 reg23;
-+ PHY_LE32 reg25;
-+ PHY_LE32 reg26;
-+ //0x50
-+ PHY_LE32 reg28;
-+ PHY_LE32 reg29;
-+ PHY_LE32 reg30;
-+ PHY_LE32 reg31;
-+ //0x60
-+ PHY_LE32 reg32;
-+ PHY_LE32 reg33;
-+};
-+
-+//U3D_reg0
-+#define RG_PCIE_SPEED_PE2D (0x1<<24) //24:24
-+#define RG_PCIE_SPEED_PE2H (0x1<<23) //23:23
-+#define RG_PCIE_SPEED_PE1D (0x1<<22) //22:22
-+#define RG_PCIE_SPEED_PE1H (0x1<<21) //21:21
-+#define RG_PCIE_SPEED_U3 (0x1<<20) //20:20
-+#define RG_SSUSB_XTAL_EXT_EN_PE2D (0x3<<18) //19:18
-+#define RG_SSUSB_XTAL_EXT_EN_PE2H (0x3<<16) //17:16
-+#define RG_SSUSB_XTAL_EXT_EN_PE1D (0x3<<14) //15:14
-+#define RG_SSUSB_XTAL_EXT_EN_PE1H (0x3<<12) //13:12
-+#define RG_SSUSB_XTAL_EXT_EN_U3 (0x3<<10) //11:10
-+#define RG_SSUSB_CDR_REFCK_SEL_PE2D (0x3<<8) //9:8
-+#define RG_SSUSB_CDR_REFCK_SEL_PE2H (0x3<<6) //7:6
-+#define RG_SSUSB_CDR_REFCK_SEL_PE1D (0x3<<4) //5:4
-+#define RG_SSUSB_CDR_REFCK_SEL_PE1H (0x3<<2) //3:2
-+#define RG_SSUSB_CDR_REFCK_SEL_U3 (0x3<<0) //1:0
-+
-+//U3D_reg1
-+#define RG_USB20_REFCK_SEL_PE2D (0x1<<30) //30:30
-+#define RG_USB20_REFCK_SEL_PE2H (0x1<<29) //29:29
-+#define RG_USB20_REFCK_SEL_PE1D (0x1<<28) //28:28
-+#define RG_USB20_REFCK_SEL_PE1H (0x1<<27) //27:27
-+#define RG_USB20_REFCK_SEL_U3 (0x1<<26) //26:26
-+#define RG_PCIE_REFCK_DIV4_PE2D (0x1<<25) //25:25
-+#define RG_PCIE_REFCK_DIV4_PE2H (0x1<<24) //24:24
-+#define RG_PCIE_REFCK_DIV4_PE1D (0x1<<18) //18:18
-+#define RG_PCIE_REFCK_DIV4_PE1H (0x1<<17) //17:17
-+#define RG_PCIE_REFCK_DIV4_U3 (0x1<<16) //16:16
-+#define RG_PCIE_MODE_PE2D (0x1<<8) //8:8
-+#define RG_PCIE_MODE_PE2H (0x1<<3) //3:3
-+#define RG_PCIE_MODE_PE1D (0x1<<2) //2:2
-+#define RG_PCIE_MODE_PE1H (0x1<<1) //1:1
-+#define RG_PCIE_MODE_U3 (0x1<<0) //0:0
-+
-+//U3D_reg4
-+#define RG_SSUSB_PLL_DIVEN_PE2D (0x7<<22) //24:22
-+#define RG_SSUSB_PLL_DIVEN_PE2H (0x7<<19) //21:19
-+#define RG_SSUSB_PLL_DIVEN_PE1D (0x7<<16) //18:16
-+#define RG_SSUSB_PLL_DIVEN_PE1H (0x7<<13) //15:13
-+#define RG_SSUSB_PLL_DIVEN_U3 (0x7<<10) //12:10
-+#define RG_SSUSB_PLL_BC_PE2D (0x3<<8) //9:8
-+#define RG_SSUSB_PLL_BC_PE2H (0x3<<6) //7:6
-+#define RG_SSUSB_PLL_BC_PE1D (0x3<<4) //5:4
-+#define RG_SSUSB_PLL_BC_PE1H (0x3<<2) //3:2
-+#define RG_SSUSB_PLL_BC_U3 (0x3<<0) //1:0
-+
-+//U3D_reg5
-+#define RG_SSUSB_PLL_BR_PE2D (0x7<<27) //29:27
-+#define RG_SSUSB_PLL_BR_PE2H (0x7<<24) //26:24
-+#define RG_SSUSB_PLL_BR_PE1D (0x7<<21) //23:21
-+#define RG_SSUSB_PLL_BR_PE1H (0x7<<18) //20:18
-+#define RG_SSUSB_PLL_BR_U3 (0x7<<15) //17:15
-+#define RG_SSUSB_PLL_IC_PE2D (0x7<<12) //14:12
-+#define RG_SSUSB_PLL_IC_PE2H (0x7<<9) //11:9
-+#define RG_SSUSB_PLL_IC_PE1D (0x7<<6) //8:6
-+#define RG_SSUSB_PLL_IC_PE1H (0x7<<3) //5:3
-+#define RG_SSUSB_PLL_IC_U3 (0x7<<0) //2:0
-+
-+//U3D_reg6
-+#define RG_SSUSB_PLL_IR_PE2D (0xf<<24) //27:24
-+#define RG_SSUSB_PLL_IR_PE2H (0xf<<16) //19:16
-+#define RG_SSUSB_PLL_IR_PE1D (0xf<<8) //11:8
-+#define RG_SSUSB_PLL_IR_PE1H (0xf<<4) //7:4
-+#define RG_SSUSB_PLL_IR_U3 (0xf<<0) //3:0
-+
-+//U3D_reg7
-+#define RG_SSUSB_PLL_BP_PE2D (0xf<<24) //27:24
-+#define RG_SSUSB_PLL_BP_PE2H (0xf<<16) //19:16
-+#define RG_SSUSB_PLL_BP_PE1D (0xf<<8) //11:8
-+#define RG_SSUSB_PLL_BP_PE1H (0xf<<4) //7:4
-+#define RG_SSUSB_PLL_BP_U3 (0xf<<0) //3:0
-+
-+//U3D_reg8
-+#define RG_SSUSB_PLL_FBKSEL_PE2D (0x3<<24) //25:24
-+#define RG_SSUSB_PLL_FBKSEL_PE2H (0x3<<16) //17:16
-+#define RG_SSUSB_PLL_FBKSEL_PE1D (0x3<<8) //9:8
-+#define RG_SSUSB_PLL_FBKSEL_PE1H (0x3<<2) //3:2
-+#define RG_SSUSB_PLL_FBKSEL_U3 (0x3<<0) //1:0
-+
-+//U3D_reg9
-+#define RG_SSUSB_PLL_FBKDIV_PE2H (0x7f<<24) //30:24
-+#define RG_SSUSB_PLL_FBKDIV_PE1D (0x7f<<16) //22:16
-+#define RG_SSUSB_PLL_FBKDIV_PE1H (0x7f<<8) //14:8
-+#define RG_SSUSB_PLL_FBKDIV_U3 (0x7f<<0) //6:0
-+
-+//U3D_reg10
-+#define RG_SSUSB_PLL_PREDIV_PE2D (0x3<<26) //27:26
-+#define RG_SSUSB_PLL_PREDIV_PE2H (0x3<<24) //25:24
-+#define RG_SSUSB_PLL_PREDIV_PE1D (0x3<<18) //19:18
-+#define RG_SSUSB_PLL_PREDIV_PE1H (0x3<<16) //17:16
-+#define RG_SSUSB_PLL_PREDIV_U3 (0x3<<8) //9:8
-+#define RG_SSUSB_PLL_FBKDIV_PE2D (0x7f<<0) //6:0
-+
-+//U3D_reg12
-+#define RG_SSUSB_PLL_PCW_NCPO_U3 (0x7fffffff<<0) //30:0
-+
-+//U3D_reg13
-+#define RG_SSUSB_PLL_PCW_NCPO_PE1H (0x7fffffff<<0) //30:0
-+
-+//U3D_reg14
-+#define RG_SSUSB_PLL_PCW_NCPO_PE1D (0x7fffffff<<0) //30:0
-+
-+//U3D_reg15
-+#define RG_SSUSB_PLL_PCW_NCPO_PE2H (0x7fffffff<<0) //30:0
-+
-+//U3D_reg16
-+#define RG_SSUSB_PLL_PCW_NCPO_PE2D (0x7fffffff<<0) //30:0
-+
-+//U3D_reg19
-+#define RG_SSUSB_PLL_SSC_DELTA1_PE1H (0xffff<<16) //31:16
-+#define RG_SSUSB_PLL_SSC_DELTA1_U3 (0xffff<<0) //15:0
-+
-+//U3D_reg20
-+#define RG_SSUSB_PLL_SSC_DELTA1_PE2H (0xffff<<16) //31:16
-+#define RG_SSUSB_PLL_SSC_DELTA1_PE1D (0xffff<<0) //15:0
-+
-+//U3D_reg21
-+#define RG_SSUSB_PLL_SSC_DELTA_U3 (0xffff<<16) //31:16
-+#define RG_SSUSB_PLL_SSC_DELTA1_PE2D (0xffff<<0) //15:0
-+
-+//U3D_reg23
-+#define RG_SSUSB_PLL_SSC_DELTA_PE1D (0xffff<<16) //31:16
-+#define RG_SSUSB_PLL_SSC_DELTA_PE1H (0xffff<<0) //15:0
-+
-+//U3D_reg25
-+#define RG_SSUSB_PLL_SSC_DELTA_PE2D (0xffff<<16) //31:16
-+#define RG_SSUSB_PLL_SSC_DELTA_PE2H (0xffff<<0) //15:0
-+
-+//U3D_reg26
-+#define RG_SSUSB_PLL_REFCKDIV_PE2D (0x1<<25) //25:25
-+#define RG_SSUSB_PLL_REFCKDIV_PE2H (0x1<<24) //24:24
-+#define RG_SSUSB_PLL_REFCKDIV_PE1D (0x1<<16) //16:16
-+#define RG_SSUSB_PLL_REFCKDIV_PE1H (0x1<<8) //8:8
-+#define RG_SSUSB_PLL_REFCKDIV_U3 (0x1<<0) //0:0
-+
-+//U3D_reg28
-+#define RG_SSUSB_CDR_BPA_PE2D (0x3<<24) //25:24
-+#define RG_SSUSB_CDR_BPA_PE2H (0x3<<16) //17:16
-+#define RG_SSUSB_CDR_BPA_PE1D (0x3<<10) //11:10
-+#define RG_SSUSB_CDR_BPA_PE1H (0x3<<8) //9:8
-+#define RG_SSUSB_CDR_BPA_U3 (0x3<<0) //1:0
-+
-+//U3D_reg29
-+#define RG_SSUSB_CDR_BPB_PE2D (0x7<<24) //26:24
-+#define RG_SSUSB_CDR_BPB_PE2H (0x7<<16) //18:16
-+#define RG_SSUSB_CDR_BPB_PE1D (0x7<<6) //8:6
-+#define RG_SSUSB_CDR_BPB_PE1H (0x7<<3) //5:3
-+#define RG_SSUSB_CDR_BPB_U3 (0x7<<0) //2:0
-+
-+//U3D_reg30
-+#define RG_SSUSB_CDR_BR_PE2D (0x7<<24) //26:24
-+#define RG_SSUSB_CDR_BR_PE2H (0x7<<16) //18:16
-+#define RG_SSUSB_CDR_BR_PE1D (0x7<<6) //8:6
-+#define RG_SSUSB_CDR_BR_PE1H (0x7<<3) //5:3
-+#define RG_SSUSB_CDR_BR_U3 (0x7<<0) //2:0
-+
-+//U3D_reg31
-+#define RG_SSUSB_CDR_FBDIV_PE2H (0x7f<<24) //30:24
-+#define RG_SSUSB_CDR_FBDIV_PE1D (0x7f<<16) //22:16
-+#define RG_SSUSB_CDR_FBDIV_PE1H (0x7f<<8) //14:8
-+#define RG_SSUSB_CDR_FBDIV_U3 (0x7f<<0) //6:0
-+
-+//U3D_reg32
-+#define RG_SSUSB_EQ_RSTEP1_PE2D (0x3<<30) //31:30
-+#define RG_SSUSB_EQ_RSTEP1_PE2H (0x3<<28) //29:28
-+#define RG_SSUSB_EQ_RSTEP1_PE1D (0x3<<26) //27:26
-+#define RG_SSUSB_EQ_RSTEP1_PE1H (0x3<<24) //25:24
-+#define RG_SSUSB_EQ_RSTEP1_U3 (0x3<<22) //23:22
-+#define RG_SSUSB_LFPS_DEGLITCH_PE2D (0x3<<20) //21:20
-+#define RG_SSUSB_LFPS_DEGLITCH_PE2H (0x3<<18) //19:18
-+#define RG_SSUSB_LFPS_DEGLITCH_PE1D (0x3<<16) //17:16
-+#define RG_SSUSB_LFPS_DEGLITCH_PE1H (0x3<<14) //15:14
-+#define RG_SSUSB_LFPS_DEGLITCH_U3 (0x3<<12) //13:12
-+#define RG_SSUSB_CDR_KVSEL_PE2D (0x1<<11) //11:11
-+#define RG_SSUSB_CDR_KVSEL_PE2H (0x1<<10) //10:10
-+#define RG_SSUSB_CDR_KVSEL_PE1D (0x1<<9) //9:9
-+#define RG_SSUSB_CDR_KVSEL_PE1H (0x1<<8) //8:8
-+#define RG_SSUSB_CDR_KVSEL_U3 (0x1<<7) //7:7
-+#define RG_SSUSB_CDR_FBDIV_PE2D (0x7f<<0) //6:0
-+
-+//U3D_reg33
-+#define RG_SSUSB_RX_CMPWD_PE2D (0x1<<26) //26:26
-+#define RG_SSUSB_RX_CMPWD_PE2H (0x1<<25) //25:25
-+#define RG_SSUSB_RX_CMPWD_PE1D (0x1<<24) //24:24
-+#define RG_SSUSB_RX_CMPWD_PE1H (0x1<<23) //23:23
-+#define RG_SSUSB_RX_CMPWD_U3 (0x1<<16) //16:16
-+#define RG_SSUSB_EQ_RSTEP2_PE2D (0x3<<8) //9:8
-+#define RG_SSUSB_EQ_RSTEP2_PE2H (0x3<<6) //7:6
-+#define RG_SSUSB_EQ_RSTEP2_PE1D (0x3<<4) //5:4
-+#define RG_SSUSB_EQ_RSTEP2_PE1H (0x3<<2) //3:2
-+#define RG_SSUSB_EQ_RSTEP2_U3 (0x3<<0) //1:0
-+
-+
-+/* OFFSET */
-+
-+//U3D_reg0
-+#define RG_PCIE_SPEED_PE2D_OFST (24)
-+#define RG_PCIE_SPEED_PE2H_OFST (23)
-+#define RG_PCIE_SPEED_PE1D_OFST (22)
-+#define RG_PCIE_SPEED_PE1H_OFST (21)
-+#define RG_PCIE_SPEED_U3_OFST (20)
-+#define RG_SSUSB_XTAL_EXT_EN_PE2D_OFST (18)
-+#define RG_SSUSB_XTAL_EXT_EN_PE2H_OFST (16)
-+#define RG_SSUSB_XTAL_EXT_EN_PE1D_OFST (14)
-+#define RG_SSUSB_XTAL_EXT_EN_PE1H_OFST (12)
-+#define RG_SSUSB_XTAL_EXT_EN_U3_OFST (10)
-+#define RG_SSUSB_CDR_REFCK_SEL_PE2D_OFST (8)
-+#define RG_SSUSB_CDR_REFCK_SEL_PE2H_OFST (6)
-+#define RG_SSUSB_CDR_REFCK_SEL_PE1D_OFST (4)
-+#define RG_SSUSB_CDR_REFCK_SEL_PE1H_OFST (2)
-+#define RG_SSUSB_CDR_REFCK_SEL_U3_OFST (0)
-+
-+//U3D_reg1
-+#define RG_USB20_REFCK_SEL_PE2D_OFST (30)
-+#define RG_USB20_REFCK_SEL_PE2H_OFST (29)
-+#define RG_USB20_REFCK_SEL_PE1D_OFST (28)
-+#define RG_USB20_REFCK_SEL_PE1H_OFST (27)
-+#define RG_USB20_REFCK_SEL_U3_OFST (26)
-+#define RG_PCIE_REFCK_DIV4_PE2D_OFST (25)
-+#define RG_PCIE_REFCK_DIV4_PE2H_OFST (24)
-+#define RG_PCIE_REFCK_DIV4_PE1D_OFST (18)
-+#define RG_PCIE_REFCK_DIV4_PE1H_OFST (17)
-+#define RG_PCIE_REFCK_DIV4_U3_OFST (16)
-+#define RG_PCIE_MODE_PE2D_OFST (8)
-+#define RG_PCIE_MODE_PE2H_OFST (3)
-+#define RG_PCIE_MODE_PE1D_OFST (2)
-+#define RG_PCIE_MODE_PE1H_OFST (1)
-+#define RG_PCIE_MODE_U3_OFST (0)
-+
-+//U3D_reg4
-+#define RG_SSUSB_PLL_DIVEN_PE2D_OFST (22)
-+#define RG_SSUSB_PLL_DIVEN_PE2H_OFST (19)
-+#define RG_SSUSB_PLL_DIVEN_PE1D_OFST (16)
-+#define RG_SSUSB_PLL_DIVEN_PE1H_OFST (13)
-+#define RG_SSUSB_PLL_DIVEN_U3_OFST (10)
-+#define RG_SSUSB_PLL_BC_PE2D_OFST (8)
-+#define RG_SSUSB_PLL_BC_PE2H_OFST (6)
-+#define RG_SSUSB_PLL_BC_PE1D_OFST (4)
-+#define RG_SSUSB_PLL_BC_PE1H_OFST (2)
-+#define RG_SSUSB_PLL_BC_U3_OFST (0)
-+
-+//U3D_reg5
-+#define RG_SSUSB_PLL_BR_PE2D_OFST (27)
-+#define RG_SSUSB_PLL_BR_PE2H_OFST (24)
-+#define RG_SSUSB_PLL_BR_PE1D_OFST (21)
-+#define RG_SSUSB_PLL_BR_PE1H_OFST (18)
-+#define RG_SSUSB_PLL_BR_U3_OFST (15)
-+#define RG_SSUSB_PLL_IC_PE2D_OFST (12)
-+#define RG_SSUSB_PLL_IC_PE2H_OFST (9)
-+#define RG_SSUSB_PLL_IC_PE1D_OFST (6)
-+#define RG_SSUSB_PLL_IC_PE1H_OFST (3)
-+#define RG_SSUSB_PLL_IC_U3_OFST (0)
-+
-+//U3D_reg6
-+#define RG_SSUSB_PLL_IR_PE2D_OFST (24)
-+#define RG_SSUSB_PLL_IR_PE2H_OFST (16)
-+#define RG_SSUSB_PLL_IR_PE1D_OFST (8)
-+#define RG_SSUSB_PLL_IR_PE1H_OFST (4)
-+#define RG_SSUSB_PLL_IR_U3_OFST (0)
-+
-+//U3D_reg7
-+#define RG_SSUSB_PLL_BP_PE2D_OFST (24)
-+#define RG_SSUSB_PLL_BP_PE2H_OFST (16)
-+#define RG_SSUSB_PLL_BP_PE1D_OFST (8)
-+#define RG_SSUSB_PLL_BP_PE1H_OFST (4)
-+#define RG_SSUSB_PLL_BP_U3_OFST (0)
-+
-+//U3D_reg8
-+#define RG_SSUSB_PLL_FBKSEL_PE2D_OFST (24)
-+#define RG_SSUSB_PLL_FBKSEL_PE2H_OFST (16)
-+#define RG_SSUSB_PLL_FBKSEL_PE1D_OFST (8)
-+#define RG_SSUSB_PLL_FBKSEL_PE1H_OFST (2)
-+#define RG_SSUSB_PLL_FBKSEL_U3_OFST (0)
-+
-+//U3D_reg9
-+#define RG_SSUSB_PLL_FBKDIV_PE2H_OFST (24)
-+#define RG_SSUSB_PLL_FBKDIV_PE1D_OFST (16)
-+#define RG_SSUSB_PLL_FBKDIV_PE1H_OFST (8)
-+#define RG_SSUSB_PLL_FBKDIV_U3_OFST (0)
-+
-+//U3D_reg10
-+#define RG_SSUSB_PLL_PREDIV_PE2D_OFST (26)
-+#define RG_SSUSB_PLL_PREDIV_PE2H_OFST (24)
-+#define RG_SSUSB_PLL_PREDIV_PE1D_OFST (18)
-+#define RG_SSUSB_PLL_PREDIV_PE1H_OFST (16)
-+#define RG_SSUSB_PLL_PREDIV_U3_OFST (8)
-+#define RG_SSUSB_PLL_FBKDIV_PE2D_OFST (0)
-+
-+//U3D_reg12
-+#define RG_SSUSB_PLL_PCW_NCPO_U3_OFST (0)
-+
-+//U3D_reg13
-+#define RG_SSUSB_PLL_PCW_NCPO_PE1H_OFST (0)
-+
-+//U3D_reg14
-+#define RG_SSUSB_PLL_PCW_NCPO_PE1D_OFST (0)
-+
-+//U3D_reg15
-+#define RG_SSUSB_PLL_PCW_NCPO_PE2H_OFST (0)
-+
-+//U3D_reg16
-+#define RG_SSUSB_PLL_PCW_NCPO_PE2D_OFST (0)
-+
-+//U3D_reg19
-+#define RG_SSUSB_PLL_SSC_DELTA1_PE1H_OFST (16)
-+#define RG_SSUSB_PLL_SSC_DELTA1_U3_OFST (0)
-+
-+//U3D_reg20
-+#define RG_SSUSB_PLL_SSC_DELTA1_PE2H_OFST (16)
-+#define RG_SSUSB_PLL_SSC_DELTA1_PE1D_OFST (0)
-+
-+//U3D_reg21
-+#define RG_SSUSB_PLL_SSC_DELTA_U3_OFST (16)
-+#define RG_SSUSB_PLL_SSC_DELTA1_PE2D_OFST (0)
-+
-+//U3D_reg23
-+#define RG_SSUSB_PLL_SSC_DELTA_PE1D_OFST (16)
-+#define RG_SSUSB_PLL_SSC_DELTA_PE1H_OFST (0)
-+
-+//U3D_reg25
-+#define RG_SSUSB_PLL_SSC_DELTA_PE2D_OFST (16)
-+#define RG_SSUSB_PLL_SSC_DELTA_PE2H_OFST (0)
-+
-+//U3D_reg26
-+#define RG_SSUSB_PLL_REFCKDIV_PE2D_OFST (25)
-+#define RG_SSUSB_PLL_REFCKDIV_PE2H_OFST (24)
-+#define RG_SSUSB_PLL_REFCKDIV_PE1D_OFST (16)
-+#define RG_SSUSB_PLL_REFCKDIV_PE1H_OFST (8)
-+#define RG_SSUSB_PLL_REFCKDIV_U3_OFST (0)
-+
-+//U3D_reg28
-+#define RG_SSUSB_CDR_BPA_PE2D_OFST (24)
-+#define RG_SSUSB_CDR_BPA_PE2H_OFST (16)
-+#define RG_SSUSB_CDR_BPA_PE1D_OFST (10)
-+#define RG_SSUSB_CDR_BPA_PE1H_OFST (8)
-+#define RG_SSUSB_CDR_BPA_U3_OFST (0)
-+
-+//U3D_reg29
-+#define RG_SSUSB_CDR_BPB_PE2D_OFST (24)
-+#define RG_SSUSB_CDR_BPB_PE2H_OFST (16)
-+#define RG_SSUSB_CDR_BPB_PE1D_OFST (6)
-+#define RG_SSUSB_CDR_BPB_PE1H_OFST (3)
-+#define RG_SSUSB_CDR_BPB_U3_OFST (0)
-+
-+//U3D_reg30
-+#define RG_SSUSB_CDR_BR_PE2D_OFST (24)
-+#define RG_SSUSB_CDR_BR_PE2H_OFST (16)
-+#define RG_SSUSB_CDR_BR_PE1D_OFST (6)
-+#define RG_SSUSB_CDR_BR_PE1H_OFST (3)
-+#define RG_SSUSB_CDR_BR_U3_OFST (0)
-+
-+//U3D_reg31
-+#define RG_SSUSB_CDR_FBDIV_PE2H_OFST (24)
-+#define RG_SSUSB_CDR_FBDIV_PE1D_OFST (16)
-+#define RG_SSUSB_CDR_FBDIV_PE1H_OFST (8)
-+#define RG_SSUSB_CDR_FBDIV_U3_OFST (0)
-+
-+//U3D_reg32
-+#define RG_SSUSB_EQ_RSTEP1_PE2D_OFST (30)
-+#define RG_SSUSB_EQ_RSTEP1_PE2H_OFST (28)
-+#define RG_SSUSB_EQ_RSTEP1_PE1D_OFST (26)
-+#define RG_SSUSB_EQ_RSTEP1_PE1H_OFST (24)
-+#define RG_SSUSB_EQ_RSTEP1_U3_OFST (22)
-+#define RG_SSUSB_LFPS_DEGLITCH_PE2D_OFST (20)
-+#define RG_SSUSB_LFPS_DEGLITCH_PE2H_OFST (18)
-+#define RG_SSUSB_LFPS_DEGLITCH_PE1D_OFST (16)
-+#define RG_SSUSB_LFPS_DEGLITCH_PE1H_OFST (14)
-+#define RG_SSUSB_LFPS_DEGLITCH_U3_OFST (12)
-+#define RG_SSUSB_CDR_KVSEL_PE2D_OFST (11)
-+#define RG_SSUSB_CDR_KVSEL_PE2H_OFST (10)
-+#define RG_SSUSB_CDR_KVSEL_PE1D_OFST (9)
-+#define RG_SSUSB_CDR_KVSEL_PE1H_OFST (8)
-+#define RG_SSUSB_CDR_KVSEL_U3_OFST (7)
-+#define RG_SSUSB_CDR_FBDIV_PE2D_OFST (0)
-+
-+//U3D_reg33
-+#define RG_SSUSB_RX_CMPWD_PE2D_OFST (26)
-+#define RG_SSUSB_RX_CMPWD_PE2H_OFST (25)
-+#define RG_SSUSB_RX_CMPWD_PE1D_OFST (24)
-+#define RG_SSUSB_RX_CMPWD_PE1H_OFST (23)
-+#define RG_SSUSB_RX_CMPWD_U3_OFST (16)
-+#define RG_SSUSB_EQ_RSTEP2_PE2D_OFST (8)
-+#define RG_SSUSB_EQ_RSTEP2_PE2H_OFST (6)
-+#define RG_SSUSB_EQ_RSTEP2_PE1D_OFST (4)
-+#define RG_SSUSB_EQ_RSTEP2_PE1H_OFST (2)
-+#define RG_SSUSB_EQ_RSTEP2_U3_OFST (0)
-+
-+
-+///////////////////////////////////////////////////////////////////////////////
-+
-+struct u3phyd_reg {
-+ //0x0
-+ PHY_LE32 phyd_mix0;
-+ PHY_LE32 phyd_mix1;
-+ PHY_LE32 phyd_lfps0;
-+ PHY_LE32 phyd_lfps1;
-+ //0x10
-+ PHY_LE32 phyd_impcal0;
-+ PHY_LE32 phyd_impcal1;
-+ PHY_LE32 phyd_txpll0;
-+ PHY_LE32 phyd_txpll1;
-+ //0x20
-+ PHY_LE32 phyd_txpll2;
-+ PHY_LE32 phyd_fl0;
-+ PHY_LE32 phyd_mix2;
-+ PHY_LE32 phyd_rx0;
-+ //0x30
-+ PHY_LE32 phyd_t2rlb;
-+ PHY_LE32 phyd_cppat;
-+ PHY_LE32 phyd_mix3;
-+ PHY_LE32 phyd_ebufctl;
-+ //0x40
-+ PHY_LE32 phyd_pipe0;
-+ PHY_LE32 phyd_pipe1;
-+ PHY_LE32 phyd_mix4;
-+ PHY_LE32 phyd_ckgen0;
-+ //0x50
-+ PHY_LE32 phyd_mix5;
-+ PHY_LE32 phyd_reserved;
-+ PHY_LE32 phyd_cdr0;
-+ PHY_LE32 phyd_cdr1;
-+ //0x60
-+ PHY_LE32 phyd_pll_0;
-+ PHY_LE32 phyd_pll_1;
-+ PHY_LE32 phyd_bcn_det_1;
-+ PHY_LE32 phyd_bcn_det_2;
-+ //0x70
-+ PHY_LE32 eq0;
-+ PHY_LE32 eq1;
-+ PHY_LE32 eq2;
-+ PHY_LE32 eq3;
-+ //0x80
-+ PHY_LE32 eq_eye0;
-+ PHY_LE32 eq_eye1;
-+ PHY_LE32 eq_eye2;
-+ PHY_LE32 eq_dfe0;
-+ //0x90
-+ PHY_LE32 eq_dfe1;
-+ PHY_LE32 eq_dfe2;
-+ PHY_LE32 eq_dfe3;
-+ PHY_LE32 reserve0;
-+ //0xa0
-+ PHY_LE32 phyd_mon0;
-+ PHY_LE32 phyd_mon1;
-+ PHY_LE32 phyd_mon2;
-+ PHY_LE32 phyd_mon3;
-+ //0xb0
-+ PHY_LE32 phyd_mon4;
-+ PHY_LE32 phyd_mon5;
-+ PHY_LE32 phyd_mon6;
-+ PHY_LE32 phyd_mon7;
-+ //0xc0
-+ PHY_LE32 phya_rx_mon0;
-+ PHY_LE32 phya_rx_mon1;
-+ PHY_LE32 phya_rx_mon2;
-+ PHY_LE32 phya_rx_mon3;
-+ //0xd0
-+ PHY_LE32 phya_rx_mon4;
-+ PHY_LE32 phya_rx_mon5;
-+ PHY_LE32 phyd_cppat2;
-+ PHY_LE32 eq_eye3;
-+ //0xe0
-+ PHY_LE32 kband_out;
-+ PHY_LE32 kband_out1;
-+};
-+
-+//U3D_PHYD_MIX0
-+#define RG_SSUSB_P_P3_TX_NG (0x1<<31) //31:31
-+#define RG_SSUSB_TSEQ_EN (0x1<<30) //30:30
-+#define RG_SSUSB_TSEQ_POLEN (0x1<<29) //29:29
-+#define RG_SSUSB_TSEQ_POL (0x1<<28) //28:28
-+#define RG_SSUSB_P_P3_PCLK_NG (0x1<<27) //27:27
-+#define RG_SSUSB_TSEQ_TH (0x7<<24) //26:24
-+#define RG_SSUSB_PRBS_BERTH (0xff<<16) //23:16
-+#define RG_SSUSB_DISABLE_PHY_U2_ON (0x1<<15) //15:15
-+#define RG_SSUSB_DISABLE_PHY_U2_OFF (0x1<<14) //14:14
-+#define RG_SSUSB_PRBS_EN (0x1<<13) //13:13
-+#define RG_SSUSB_BPSLOCK (0x1<<12) //12:12
-+#define RG_SSUSB_RTCOMCNT (0xf<<8) //11:8
-+#define RG_SSUSB_COMCNT (0xf<<4) //7:4
-+#define RG_SSUSB_PRBSEL_CALIB (0xf<<0) //3:0
-+
-+//U3D_PHYD_MIX1
-+#define RG_SSUSB_SLEEP_EN (0x1<<31) //31:31
-+#define RG_SSUSB_PRBSEL_PCS (0x7<<28) //30:28
-+#define RG_SSUSB_TXLFPS_PRD (0xf<<24) //27:24
-+#define RG_SSUSB_P_RX_P0S_CK (0x1<<23) //23:23
-+#define RG_SSUSB_P_TX_P0S_CK (0x1<<22) //22:22
-+#define RG_SSUSB_PDNCTL (0x3f<<16) //21:16
-+#define RG_SSUSB_TX_DRV_EN (0x1<<15) //15:15
-+#define RG_SSUSB_TX_DRV_SEL (0x1<<14) //14:14
-+#define RG_SSUSB_TX_DRV_DLY (0x3f<<8) //13:8
-+#define RG_SSUSB_BERT_EN (0x1<<7) //7:7
-+#define RG_SSUSB_SCP_TH (0x7<<4) //6:4
-+#define RG_SSUSB_SCP_EN (0x1<<3) //3:3
-+#define RG_SSUSB_RXANSIDEC_TEST (0x7<<0) //2:0
-+
-+//U3D_PHYD_LFPS0
-+#define RG_SSUSB_LFPS_PWD (0x1<<30) //30:30
-+#define RG_SSUSB_FORCE_LFPS_PWD (0x1<<29) //29:29
-+#define RG_SSUSB_RXLFPS_OVF (0x1f<<24) //28:24
-+#define RG_SSUSB_P3_ENTRY_SEL (0x1<<23) //23:23
-+#define RG_SSUSB_P3_ENTRY (0x1<<22) //22:22
-+#define RG_SSUSB_RXLFPS_CDRSEL (0x3<<20) //21:20
-+#define RG_SSUSB_RXLFPS_CDRTH (0xf<<16) //19:16
-+#define RG_SSUSB_LOCK5G_BLOCK (0x1<<15) //15:15
-+#define RG_SSUSB_TFIFO_EXT_D_SEL (0x1<<14) //14:14
-+#define RG_SSUSB_TFIFO_NO_EXTEND (0x1<<13) //13:13
-+#define RG_SSUSB_RXLFPS_LOB (0x1f<<8) //12:8
-+#define RG_SSUSB_TXLFPS_EN (0x1<<7) //7:7
-+#define RG_SSUSB_TXLFPS_SEL (0x1<<6) //6:6
-+#define RG_SSUSB_RXLFPS_CDRLOCK (0x1<<5) //5:5
-+#define RG_SSUSB_RXLFPS_UPB (0x1f<<0) //4:0
-+
-+//U3D_PHYD_LFPS1
-+#define RG_SSUSB_RX_IMP_BIAS (0xf<<28) //31:28
-+#define RG_SSUSB_TX_IMP_BIAS (0xf<<24) //27:24
-+#define RG_SSUSB_FWAKE_TH (0x3f<<16) //21:16
-+#define RG_SSUSB_RXLFPS_UDF (0x1f<<8) //12:8
-+#define RG_SSUSB_RXLFPS_P0IDLETH (0xff<<0) //7:0
-+
-+//U3D_PHYD_IMPCAL0
-+#define RG_SSUSB_FORCE_TX_IMPSEL (0x1<<31) //31:31
-+#define RG_SSUSB_TX_IMPCAL_EN (0x1<<30) //30:30
-+#define RG_SSUSB_FORCE_TX_IMPCAL_EN (0x1<<29) //29:29
-+#define RG_SSUSB_TX_IMPSEL (0x1f<<24) //28:24
-+#define RG_SSUSB_TX_IMPCAL_CALCYC (0x3f<<16) //21:16
-+#define RG_SSUSB_TX_IMPCAL_STBCYC (0x1f<<10) //14:10
-+#define RG_SSUSB_TX_IMPCAL_CYCCNT (0x3ff<<0) //9:0
-+
-+//U3D_PHYD_IMPCAL1
-+#define RG_SSUSB_FORCE_RX_IMPSEL (0x1<<31) //31:31
-+#define RG_SSUSB_RX_IMPCAL_EN (0x1<<30) //30:30
-+#define RG_SSUSB_FORCE_RX_IMPCAL_EN (0x1<<29) //29:29
-+#define RG_SSUSB_RX_IMPSEL (0x1f<<24) //28:24
-+#define RG_SSUSB_RX_IMPCAL_CALCYC (0x3f<<16) //21:16
-+#define RG_SSUSB_RX_IMPCAL_STBCYC (0x1f<<10) //14:10
-+#define RG_SSUSB_RX_IMPCAL_CYCCNT (0x3ff<<0) //9:0
-+
-+//U3D_PHYD_TXPLL0
-+#define RG_SSUSB_TXPLL_DDSEN_CYC (0x1f<<27) //31:27
-+#define RG_SSUSB_TXPLL_ON (0x1<<26) //26:26
-+#define RG_SSUSB_FORCE_TXPLLON (0x1<<25) //25:25
-+#define RG_SSUSB_TXPLL_STBCYC (0x1ff<<16) //24:16
-+#define RG_SSUSB_TXPLL_NCPOCHG_CYC (0xf<<12) //15:12
-+#define RG_SSUSB_TXPLL_NCPOEN_CYC (0x3<<10) //11:10
-+#define RG_SSUSB_TXPLL_DDSRSTB_CYC (0x7<<0) //2:0
-+
-+//U3D_PHYD_TXPLL1
-+#define RG_SSUSB_PLL_NCPO_EN (0x1<<31) //31:31
-+#define RG_SSUSB_PLL_FIFO_START_MAN (0x1<<30) //30:30
-+#define RG_SSUSB_PLL_NCPO_CHG (0x1<<28) //28:28
-+#define RG_SSUSB_PLL_DDS_RSTB (0x1<<27) //27:27
-+#define RG_SSUSB_PLL_DDS_PWDB (0x1<<26) //26:26
-+#define RG_SSUSB_PLL_DDSEN (0x1<<25) //25:25
-+#define RG_SSUSB_PLL_AUTOK_VCO (0x1<<24) //24:24
-+#define RG_SSUSB_PLL_PWD (0x1<<23) //23:23
-+#define RG_SSUSB_RX_AFE_PWD (0x1<<22) //22:22
-+#define RG_SSUSB_PLL_TCADJ (0x3f<<16) //21:16
-+#define RG_SSUSB_FORCE_CDR_TCADJ (0x1<<15) //15:15
-+#define RG_SSUSB_FORCE_CDR_AUTOK_VCO (0x1<<14) //14:14
-+#define RG_SSUSB_FORCE_CDR_PWD (0x1<<13) //13:13
-+#define RG_SSUSB_FORCE_PLL_NCPO_EN (0x1<<12) //12:12
-+#define RG_SSUSB_FORCE_PLL_FIFO_START_MAN (0x1<<11) //11:11
-+#define RG_SSUSB_FORCE_PLL_NCPO_CHG (0x1<<9) //9:9
-+#define RG_SSUSB_FORCE_PLL_DDS_RSTB (0x1<<8) //8:8
-+#define RG_SSUSB_FORCE_PLL_DDS_PWDB (0x1<<7) //7:7
-+#define RG_SSUSB_FORCE_PLL_DDSEN (0x1<<6) //6:6
-+#define RG_SSUSB_FORCE_PLL_TCADJ (0x1<<5) //5:5
-+#define RG_SSUSB_FORCE_PLL_AUTOK_VCO (0x1<<4) //4:4
-+#define RG_SSUSB_FORCE_PLL_PWD (0x1<<3) //3:3
-+#define RG_SSUSB_FLT_1_DISPERR_B (0x1<<2) //2:2
-+
-+//U3D_PHYD_TXPLL2
-+#define RG_SSUSB_TX_LFPS_EN (0x1<<31) //31:31
-+#define RG_SSUSB_FORCE_TX_LFPS_EN (0x1<<30) //30:30
-+#define RG_SSUSB_TX_LFPS (0x1<<29) //29:29
-+#define RG_SSUSB_FORCE_TX_LFPS (0x1<<28) //28:28
-+#define RG_SSUSB_RXPLL_STB (0x1<<27) //27:27
-+#define RG_SSUSB_TXPLL_STB (0x1<<26) //26:26
-+#define RG_SSUSB_FORCE_RXPLL_STB (0x1<<25) //25:25
-+#define RG_SSUSB_FORCE_TXPLL_STB (0x1<<24) //24:24
-+#define RG_SSUSB_RXPLL_REFCKSEL (0x1<<16) //16:16
-+#define RG_SSUSB_RXPLL_STBMODE (0x1<<11) //11:11
-+#define RG_SSUSB_RXPLL_ON (0x1<<10) //10:10
-+#define RG_SSUSB_FORCE_RXPLLON (0x1<<9) //9:9
-+#define RG_SSUSB_FORCE_RX_AFE_PWD (0x1<<8) //8:8
-+#define RG_SSUSB_CDR_AUTOK_VCO (0x1<<7) //7:7
-+#define RG_SSUSB_CDR_PWD (0x1<<6) //6:6
-+#define RG_SSUSB_CDR_TCADJ (0x3f<<0) //5:0
-+
-+//U3D_PHYD_FL0
-+#define RG_SSUSB_RX_FL_TARGET (0xffff<<16) //31:16
-+#define RG_SSUSB_RX_FL_CYCLECNT (0xffff<<0) //15:0
-+
-+//U3D_PHYD_MIX2
-+#define RG_SSUSB_RX_EQ_RST (0x1<<31) //31:31
-+#define RG_SSUSB_RX_EQ_RST_SEL (0x1<<30) //30:30
-+#define RG_SSUSB_RXVAL_RST (0x1<<29) //29:29
-+#define RG_SSUSB_RXVAL_CNT (0x1f<<24) //28:24
-+#define RG_SSUSB_CDROS_EN (0x1<<18) //18:18
-+#define RG_SSUSB_CDR_LCKOP (0x3<<16) //17:16
-+#define RG_SSUSB_RX_FL_LOCKTH (0xf<<8) //11:8
-+#define RG_SSUSB_RX_FL_OFFSET (0xff<<0) //7:0
-+
-+//U3D_PHYD_RX0
-+#define RG_SSUSB_T2RLB_BERTH (0xff<<24) //31:24
-+#define RG_SSUSB_T2RLB_PAT (0xff<<16) //23:16
-+#define RG_SSUSB_T2RLB_EN (0x1<<15) //15:15
-+#define RG_SSUSB_T2RLB_BPSCRAMB (0x1<<14) //14:14
-+#define RG_SSUSB_T2RLB_SERIAL (0x1<<13) //13:13
-+#define RG_SSUSB_T2RLB_MODE (0x3<<11) //12:11
-+#define RG_SSUSB_RX_SAOSC_EN (0x1<<10) //10:10
-+#define RG_SSUSB_RX_SAOSC_EN_SEL (0x1<<9) //9:9
-+#define RG_SSUSB_RX_DFE_OPTION (0x1<<8) //8:8
-+#define RG_SSUSB_RX_DFE_EN (0x1<<7) //7:7
-+#define RG_SSUSB_RX_DFE_EN_SEL (0x1<<6) //6:6
-+#define RG_SSUSB_RX_EQ_EN (0x1<<5) //5:5
-+#define RG_SSUSB_RX_EQ_EN_SEL (0x1<<4) //4:4
-+#define RG_SSUSB_RX_SAOSC_RST (0x1<<3) //3:3
-+#define RG_SSUSB_RX_SAOSC_RST_SEL (0x1<<2) //2:2
-+#define RG_SSUSB_RX_DFE_RST (0x1<<1) //1:1
-+#define RG_SSUSB_RX_DFE_RST_SEL (0x1<<0) //0:0
-+
-+//U3D_PHYD_T2RLB
-+#define RG_SSUSB_EQTRAIN_CH_MODE (0x1<<28) //28:28
-+#define RG_SSUSB_PRB_OUT_CPPAT (0x1<<27) //27:27
-+#define RG_SSUSB_BPANSIENC (0x1<<26) //26:26
-+#define RG_SSUSB_VALID_EN (0x1<<25) //25:25
-+#define RG_SSUSB_EBUF_SRST (0x1<<24) //24:24
-+#define RG_SSUSB_K_EMP (0xf<<20) //23:20
-+#define RG_SSUSB_K_FUL (0xf<<16) //19:16
-+#define RG_SSUSB_T2RLB_BDATRST (0xf<<12) //15:12
-+#define RG_SSUSB_P_T2RLB_SKP_EN (0x1<<10) //10:10
-+#define RG_SSUSB_T2RLB_PATMODE (0x3<<8) //9:8
-+#define RG_SSUSB_T2RLB_TSEQCNT (0xff<<0) //7:0
-+
-+//U3D_PHYD_CPPAT
-+#define RG_SSUSB_CPPAT_PROGRAM_EN (0x1<<24) //24:24
-+#define RG_SSUSB_CPPAT_TOZ (0x3<<21) //22:21
-+#define RG_SSUSB_CPPAT_PRBS_EN (0x1<<20) //20:20
-+#define RG_SSUSB_CPPAT_OUT_TMP2 (0xf<<16) //19:16
-+#define RG_SSUSB_CPPAT_OUT_TMP1 (0xff<<8) //15:8
-+#define RG_SSUSB_CPPAT_OUT_TMP0 (0xff<<0) //7:0
-+
-+//U3D_PHYD_MIX3
-+#define RG_SSUSB_CDR_TCADJ_MINUS (0x1<<31) //31:31
-+#define RG_SSUSB_P_CDROS_EN (0x1<<30) //30:30
-+#define RG_SSUSB_P_P2_TX_DRV_DIS (0x1<<28) //28:28
-+#define RG_SSUSB_CDR_TCADJ_OFFSET (0x7<<24) //26:24
-+#define RG_SSUSB_PLL_TCADJ_MINUS (0x1<<23) //23:23
-+#define RG_SSUSB_FORCE_PLL_BIAS_LPF_EN (0x1<<20) //20:20
-+#define RG_SSUSB_PLL_BIAS_LPF_EN (0x1<<19) //19:19
-+#define RG_SSUSB_PLL_TCADJ_OFFSET (0x7<<16) //18:16
-+#define RG_SSUSB_FORCE_PLL_SSCEN (0x1<<15) //15:15
-+#define RG_SSUSB_PLL_SSCEN (0x1<<14) //14:14
-+#define RG_SSUSB_FORCE_CDR_PI_PWD (0x1<<13) //13:13
-+#define RG_SSUSB_CDR_PI_PWD (0x1<<12) //12:12
-+#define RG_SSUSB_CDR_PI_MODE (0x1<<11) //11:11
-+#define RG_SSUSB_TXPLL_SSCEN_CYC (0x3ff<<0) //9:0
-+
-+//U3D_PHYD_EBUFCTL
-+#define RG_SSUSB_EBUFCTL (0xffffffff<<0) //31:0
-+
-+//U3D_PHYD_PIPE0
-+#define RG_SSUSB_RXTERMINATION (0x1<<30) //30:30
-+#define RG_SSUSB_RXEQTRAINING (0x1<<29) //29:29
-+#define RG_SSUSB_RXPOLARITY (0x1<<28) //28:28
-+#define RG_SSUSB_TXDEEMPH (0x3<<26) //27:26
-+#define RG_SSUSB_POWERDOWN (0x3<<24) //25:24
-+#define RG_SSUSB_TXONESZEROS (0x1<<23) //23:23
-+#define RG_SSUSB_TXELECIDLE (0x1<<22) //22:22
-+#define RG_SSUSB_TXDETECTRX (0x1<<21) //21:21
-+#define RG_SSUSB_PIPE_SEL (0x1<<20) //20:20
-+#define RG_SSUSB_TXDATAK (0xf<<16) //19:16
-+#define RG_SSUSB_CDR_STABLE_SEL (0x1<<15) //15:15
-+#define RG_SSUSB_CDR_STABLE (0x1<<14) //14:14
-+#define RG_SSUSB_CDR_RSTB_SEL (0x1<<13) //13:13
-+#define RG_SSUSB_CDR_RSTB (0x1<<12) //12:12
-+#define RG_SSUSB_P_ERROR_SEL (0x3<<4) //5:4
-+#define RG_SSUSB_TXMARGIN (0x7<<1) //3:1
-+#define RG_SSUSB_TXCOMPLIANCE (0x1<<0) //0:0
-+
-+//U3D_PHYD_PIPE1
-+#define RG_SSUSB_TXDATA (0xffffffff<<0) //31:0
-+
-+//U3D_PHYD_MIX4
-+#define RG_SSUSB_CDROS_CNT (0x3f<<24) //29:24
-+#define RG_SSUSB_T2RLB_BER_EN (0x1<<16) //16:16
-+#define RG_SSUSB_T2RLB_BER_RATE (0xffff<<0) //15:0
-+
-+//U3D_PHYD_CKGEN0
-+#define RG_SSUSB_RFIFO_IMPLAT (0x1<<27) //27:27
-+#define RG_SSUSB_TFIFO_PSEL (0x7<<24) //26:24
-+#define RG_SSUSB_CKGEN_PSEL (0x3<<8) //9:8
-+#define RG_SSUSB_RXCK_INV (0x1<<0) //0:0
-+
-+//U3D_PHYD_MIX5
-+#define RG_SSUSB_PRB_SEL (0xffff<<16) //31:16
-+#define RG_SSUSB_RXPLL_STBCYC (0x7ff<<0) //10:0
-+
-+//U3D_PHYD_RESERVED
-+#define RG_SSUSB_PHYD_RESERVE (0xffffffff<<0) //31:0
-+//#define RG_SSUSB_RX_SIGDET_SEL (0x1<<11)
-+//#define RG_SSUSB_RX_SIGDET_EN (0x1<<12)
-+//#define RG_SSUSB_RX_PI_CAL_MANUAL_SEL (0x1<<9)
-+//#define RG_SSUSB_RX_PI_CAL_MANUAL_EN (0x1<<10)
-+
-+//U3D_PHYD_CDR0
-+#define RG_SSUSB_CDR_BIC_LTR (0xf<<28) //31:28
-+#define RG_SSUSB_CDR_BIC_LTD0 (0xf<<24) //27:24
-+#define RG_SSUSB_CDR_BC_LTD1 (0x1f<<16) //20:16
-+#define RG_SSUSB_CDR_BC_LTR (0x1f<<8) //12:8
-+#define RG_SSUSB_CDR_BC_LTD0 (0x1f<<0) //4:0
-+
-+//U3D_PHYD_CDR1
-+#define RG_SSUSB_CDR_BIR_LTD1 (0x1f<<24) //28:24
-+#define RG_SSUSB_CDR_BIR_LTR (0x1f<<16) //20:16
-+#define RG_SSUSB_CDR_BIR_LTD0 (0x1f<<8) //12:8
-+#define RG_SSUSB_CDR_BW_SEL (0x3<<6) //7:6
-+#define RG_SSUSB_CDR_BIC_LTD1 (0xf<<0) //3:0
-+
-+//U3D_PHYD_PLL_0
-+#define RG_SSUSB_FORCE_CDR_BAND_5G (0x1<<28) //28:28
-+#define RG_SSUSB_FORCE_CDR_BAND_2P5G (0x1<<27) //27:27
-+#define RG_SSUSB_FORCE_PLL_BAND_5G (0x1<<26) //26:26
-+#define RG_SSUSB_FORCE_PLL_BAND_2P5G (0x1<<25) //25:25
-+#define RG_SSUSB_P_EQ_T_SEL (0x3ff<<15) //24:15
-+#define RG_SSUSB_PLL_ISO_EN_CYC (0x3ff<<5) //14:5
-+#define RG_SSUSB_PLLBAND_RECAL (0x1<<4) //4:4
-+#define RG_SSUSB_PLL_DDS_ISO_EN (0x1<<3) //3:3
-+#define RG_SSUSB_FORCE_PLL_DDS_ISO_EN (0x1<<2) //2:2
-+#define RG_SSUSB_PLL_DDS_PWR_ON (0x1<<1) //1:1
-+#define RG_SSUSB_FORCE_PLL_DDS_PWR_ON (0x1<<0) //0:0
-+
-+//U3D_PHYD_PLL_1
-+#define RG_SSUSB_CDR_BAND_5G (0xff<<24) //31:24
-+#define RG_SSUSB_CDR_BAND_2P5G (0xff<<16) //23:16
-+#define RG_SSUSB_PLL_BAND_5G (0xff<<8) //15:8
-+#define RG_SSUSB_PLL_BAND_2P5G (0xff<<0) //7:0
-+
-+//U3D_PHYD_BCN_DET_1
-+#define RG_SSUSB_P_BCN_OBS_PRD (0xffff<<16) //31:16
-+#define RG_SSUSB_U_BCN_OBS_PRD (0xffff<<0) //15:0
-+
-+//U3D_PHYD_BCN_DET_2
-+#define RG_SSUSB_P_BCN_OBS_SEL (0xfff<<16) //27:16
-+#define RG_SSUSB_BCN_DET_DIS (0x1<<12) //12:12
-+#define RG_SSUSB_U_BCN_OBS_SEL (0xfff<<0) //11:0
-+
-+//U3D_EQ0
-+#define RG_SSUSB_EQ_DLHL_LFI (0x7f<<24) //30:24
-+#define RG_SSUSB_EQ_DHHL_LFI (0x7f<<16) //22:16
-+#define RG_SSUSB_EQ_DD0HOS_LFI (0x7f<<8) //14:8
-+#define RG_SSUSB_EQ_DD0LOS_LFI (0x7f<<0) //6:0
-+
-+//U3D_EQ1
-+#define RG_SSUSB_EQ_DD1HOS_LFI (0x7f<<24) //30:24
-+#define RG_SSUSB_EQ_DD1LOS_LFI (0x7f<<16) //22:16
-+#define RG_SSUSB_EQ_DE0OS_LFI (0x7f<<8) //14:8
-+#define RG_SSUSB_EQ_DE1OS_LFI (0x7f<<0) //6:0
-+
-+//U3D_EQ2
-+#define RG_SSUSB_EQ_DLHLOS_LFI (0x7f<<24) //30:24
-+#define RG_SSUSB_EQ_DHHLOS_LFI (0x7f<<16) //22:16
-+#define RG_SSUSB_EQ_STOPTIME (0x1<<14) //14:14
-+#define RG_SSUSB_EQ_DHHL_LF_SEL (0x7<<11) //13:11
-+#define RG_SSUSB_EQ_DSAOS_LF_SEL (0x7<<8) //10:8
-+#define RG_SSUSB_EQ_STARTTIME (0x3<<6) //7:6
-+#define RG_SSUSB_EQ_DLEQ_LF_SEL (0x7<<3) //5:3
-+#define RG_SSUSB_EQ_DLHL_LF_SEL (0x7<<0) //2:0
-+
-+//U3D_EQ3
-+#define RG_SSUSB_EQ_DLEQ_LFI_GEN2 (0xf<<28) //31:28
-+#define RG_SSUSB_EQ_DLEQ_LFI_GEN1 (0xf<<24) //27:24
-+#define RG_SSUSB_EQ_DEYE0OS_LFI (0x7f<<16) //22:16
-+#define RG_SSUSB_EQ_DEYE1OS_LFI (0x7f<<8) //14:8
-+#define RG_SSUSB_EQ_TRI_DET_EN (0x1<<7) //7:7
-+#define RG_SSUSB_EQ_TRI_DET_TH (0x7f<<0) //6:0
-+
-+//U3D_EQ_EYE0
-+#define RG_SSUSB_EQ_EYE_XOFFSET (0x7f<<25) //31:25
-+#define RG_SSUSB_EQ_EYE_MON_EN (0x1<<24) //24:24
-+#define RG_SSUSB_EQ_EYE0_Y (0x7f<<16) //22:16
-+#define RG_SSUSB_EQ_EYE1_Y (0x7f<<8) //14:8
-+#define RG_SSUSB_EQ_PILPO_ROUT (0x1<<7) //7:7
-+#define RG_SSUSB_EQ_PI_KPGAIN (0x7<<4) //6:4
-+#define RG_SSUSB_EQ_EYE_CNT_EN (0x1<<3) //3:3
-+
-+//U3D_EQ_EYE1
-+#define RG_SSUSB_EQ_SIGDET (0x7f<<24) //30:24
-+#define RG_SSUSB_EQ_EYE_MASK (0x3ff<<7) //16:7
-+
-+//U3D_EQ_EYE2
-+#define RG_SSUSB_EQ_RX500M_CK_SEL (0x1<<31) //31:31
-+#define RG_SSUSB_EQ_SD_CNT1 (0x3f<<24) //29:24
-+#define RG_SSUSB_EQ_ISIFLAG_SEL (0x3<<22) //23:22
-+#define RG_SSUSB_EQ_SD_CNT0 (0x3f<<16) //21:16
-+
-+//U3D_EQ_DFE0
-+#define RG_SSUSB_EQ_LEQMAX (0xf<<28) //31:28
-+#define RG_SSUSB_EQ_DFEX_EN (0x1<<27) //27:27
-+#define RG_SSUSB_EQ_DFEX_LF_SEL (0x7<<24) //26:24
-+#define RG_SSUSB_EQ_CHK_EYE_H (0x1<<23) //23:23
-+#define RG_SSUSB_EQ_PIEYE_INI (0x7f<<16) //22:16
-+#define RG_SSUSB_EQ_PI90_INI (0x7f<<8) //14:8
-+#define RG_SSUSB_EQ_PI0_INI (0x7f<<0) //6:0
-+
-+//U3D_EQ_DFE1
-+#define RG_SSUSB_EQ_REV (0xffff<<16) //31:16
-+#define RG_SSUSB_EQ_DFEYEN_DUR (0x7<<12) //14:12
-+#define RG_SSUSB_EQ_DFEXEN_DUR (0x7<<8) //10:8
-+#define RG_SSUSB_EQ_DFEX_RST (0x1<<7) //7:7
-+#define RG_SSUSB_EQ_GATED_RXD_B (0x1<<6) //6:6
-+#define RG_SSUSB_EQ_PI90CK_SEL (0x3<<4) //5:4
-+#define RG_SSUSB_EQ_DFEX_DIS (0x1<<2) //2:2
-+#define RG_SSUSB_EQ_DFEYEN_STOP_DIS (0x1<<1) //1:1
-+#define RG_SSUSB_EQ_DFEXEN_SEL (0x1<<0) //0:0
-+
-+//U3D_EQ_DFE2
-+#define RG_SSUSB_EQ_MON_SEL (0x1f<<24) //28:24
-+#define RG_SSUSB_EQ_LEQOSC_DLYCNT (0x7<<16) //18:16
-+#define RG_SSUSB_EQ_DLEQOS_LFI (0x1f<<8) //12:8
-+#define RG_SSUSB_EQ_LEQ_STOP_TO (0x3<<0) //1:0
-+
-+//U3D_EQ_DFE3
-+#define RG_SSUSB_EQ_RESERVED (0xffffffff<<0) //31:0
-+
-+//U3D_PHYD_MON0
-+#define RGS_SSUSB_BERT_BERC (0xffff<<16) //31:16
-+#define RGS_SSUSB_LFPS (0xf<<12) //15:12
-+#define RGS_SSUSB_TRAINDEC (0x7<<8) //10:8
-+#define RGS_SSUSB_SCP_PAT (0xff<<0) //7:0
-+
-+//U3D_PHYD_MON1
-+#define RGS_SSUSB_RX_FL_OUT (0xffff<<0) //15:0
-+
-+//U3D_PHYD_MON2
-+#define RGS_SSUSB_T2RLB_ERRCNT (0xffff<<16) //31:16
-+#define RGS_SSUSB_RETRACK (0xf<<12) //15:12
-+#define RGS_SSUSB_RXPLL_LOCK (0x1<<10) //10:10
-+#define RGS_SSUSB_CDR_VCOCAL_CPLT_D (0x1<<9) //9:9
-+#define RGS_SSUSB_PLL_VCOCAL_CPLT_D (0x1<<8) //8:8
-+#define RGS_SSUSB_PDNCTL (0xff<<0) //7:0
-+
-+//U3D_PHYD_MON3
-+#define RGS_SSUSB_TSEQ_ERRCNT (0xffff<<16) //31:16
-+#define RGS_SSUSB_PRBS_ERRCNT (0xffff<<0) //15:0
-+
-+//U3D_PHYD_MON4
-+#define RGS_SSUSB_RX_LSLOCK_CNT (0xf<<24) //27:24
-+#define RGS_SSUSB_SCP_DETCNT (0xff<<16) //23:16
-+#define RGS_SSUSB_TSEQ_DETCNT (0xffff<<0) //15:0
-+
-+//U3D_PHYD_MON5
-+#define RGS_SSUSB_EBUFMSG (0xffff<<16) //31:16
-+#define RGS_SSUSB_BERT_LOCK (0x1<<15) //15:15
-+#define RGS_SSUSB_SCP_DET (0x1<<14) //14:14
-+#define RGS_SSUSB_TSEQ_DET (0x1<<13) //13:13
-+#define RGS_SSUSB_EBUF_UDF (0x1<<12) //12:12
-+#define RGS_SSUSB_EBUF_OVF (0x1<<11) //11:11
-+#define RGS_SSUSB_PRBS_PASSTH (0x1<<10) //10:10
-+#define RGS_SSUSB_PRBS_PASS (0x1<<9) //9:9
-+#define RGS_SSUSB_PRBS_LOCK (0x1<<8) //8:8
-+#define RGS_SSUSB_T2RLB_ERR (0x1<<6) //6:6
-+#define RGS_SSUSB_T2RLB_PASSTH (0x1<<5) //5:5
-+#define RGS_SSUSB_T2RLB_PASS (0x1<<4) //4:4
-+#define RGS_SSUSB_T2RLB_LOCK (0x1<<3) //3:3
-+#define RGS_SSUSB_RX_IMPCAL_DONE (0x1<<2) //2:2
-+#define RGS_SSUSB_TX_IMPCAL_DONE (0x1<<1) //1:1
-+#define RGS_SSUSB_RXDETECTED (0x1<<0) //0:0
-+
-+//U3D_PHYD_MON6
-+#define RGS_SSUSB_SIGCAL_DONE (0x1<<30) //30:30
-+#define RGS_SSUSB_SIGCAL_CAL_OUT (0x1<<29) //29:29
-+#define RGS_SSUSB_SIGCAL_OFFSET (0x1f<<24) //28:24
-+#define RGS_SSUSB_RX_IMP_SEL (0x1f<<16) //20:16
-+#define RGS_SSUSB_TX_IMP_SEL (0x1f<<8) //12:8
-+#define RGS_SSUSB_TFIFO_MSG (0xf<<4) //7:4
-+#define RGS_SSUSB_RFIFO_MSG (0xf<<0) //3:0
-+
-+//U3D_PHYD_MON7
-+#define RGS_SSUSB_FT_OUT (0xff<<8) //15:8
-+#define RGS_SSUSB_PRB_OUT (0xff<<0) //7:0
-+
-+//U3D_PHYA_RX_MON0
-+#define RGS_SSUSB_EQ_DCLEQ (0xf<<24) //27:24
-+#define RGS_SSUSB_EQ_DCD0H (0x7f<<16) //22:16
-+#define RGS_SSUSB_EQ_DCD0L (0x7f<<8) //14:8
-+#define RGS_SSUSB_EQ_DCD1H (0x7f<<0) //6:0
-+
-+//U3D_PHYA_RX_MON1
-+#define RGS_SSUSB_EQ_DCD1L (0x7f<<24) //30:24
-+#define RGS_SSUSB_EQ_DCE0 (0x7f<<16) //22:16
-+#define RGS_SSUSB_EQ_DCE1 (0x7f<<8) //14:8
-+#define RGS_SSUSB_EQ_DCHHL (0x7f<<0) //6:0
-+
-+//U3D_PHYA_RX_MON2
-+#define RGS_SSUSB_EQ_LEQ_STOP (0x1<<31) //31:31
-+#define RGS_SSUSB_EQ_DCLHL (0x7f<<24) //30:24
-+#define RGS_SSUSB_EQ_STATUS (0xff<<16) //23:16
-+#define RGS_SSUSB_EQ_DCEYE0 (0x7f<<8) //14:8
-+#define RGS_SSUSB_EQ_DCEYE1 (0x7f<<0) //6:0
-+
-+//U3D_PHYA_RX_MON3
-+#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0 (0xfffff<<0) //19:0
-+
-+//U3D_PHYA_RX_MON4
-+#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1 (0xfffff<<0) //19:0
-+
-+//U3D_PHYA_RX_MON5
-+#define RGS_SSUSB_EQ_DCLEQOS (0x1f<<8) //12:8
-+#define RGS_SSUSB_EQ_EYE_CNT_RDY (0x1<<7) //7:7
-+#define RGS_SSUSB_EQ_PILPO (0x7f<<0) //6:0
-+
-+//U3D_PHYD_CPPAT2
-+#define RG_SSUSB_CPPAT_OUT_H_TMP2 (0xf<<16) //19:16
-+#define RG_SSUSB_CPPAT_OUT_H_TMP1 (0xff<<8) //15:8
-+#define RG_SSUSB_CPPAT_OUT_H_TMP0 (0xff<<0) //7:0
-+
-+//U3D_EQ_EYE3
-+#define RG_SSUSB_EQ_LEQ_SHIFT (0x7<<24) //26:24
-+#define RG_SSUSB_EQ_EYE_CNT (0xfffff<<0) //19:0
-+
-+//U3D_KBAND_OUT
-+#define RGS_SSUSB_CDR_BAND_5G (0xff<<24) //31:24
-+#define RGS_SSUSB_CDR_BAND_2P5G (0xff<<16) //23:16
-+#define RGS_SSUSB_PLL_BAND_5G (0xff<<8) //15:8
-+#define RGS_SSUSB_PLL_BAND_2P5G (0xff<<0) //7:0
-+
-+//U3D_KBAND_OUT1
-+#define RGS_SSUSB_CDR_VCOCAL_FAIL (0x1<<24) //24:24
-+#define RGS_SSUSB_CDR_VCOCAL_STATE (0xff<<16) //23:16
-+#define RGS_SSUSB_PLL_VCOCAL_FAIL (0x1<<8) //8:8
-+#define RGS_SSUSB_PLL_VCOCAL_STATE (0xff<<0) //7:0
-+
-+
-+/* OFFSET */
-+
-+//U3D_PHYD_MIX0
-+#define RG_SSUSB_P_P3_TX_NG_OFST (31)
-+#define RG_SSUSB_TSEQ_EN_OFST (30)
-+#define RG_SSUSB_TSEQ_POLEN_OFST (29)
-+#define RG_SSUSB_TSEQ_POL_OFST (28)
-+#define RG_SSUSB_P_P3_PCLK_NG_OFST (27)
-+#define RG_SSUSB_TSEQ_TH_OFST (24)
-+#define RG_SSUSB_PRBS_BERTH_OFST (16)
-+#define RG_SSUSB_DISABLE_PHY_U2_ON_OFST (15)
-+#define RG_SSUSB_DISABLE_PHY_U2_OFF_OFST (14)
-+#define RG_SSUSB_PRBS_EN_OFST (13)
-+#define RG_SSUSB_BPSLOCK_OFST (12)
-+#define RG_SSUSB_RTCOMCNT_OFST (8)
-+#define RG_SSUSB_COMCNT_OFST (4)
-+#define RG_SSUSB_PRBSEL_CALIB_OFST (0)
-+
-+//U3D_PHYD_MIX1
-+#define RG_SSUSB_SLEEP_EN_OFST (31)
-+#define RG_SSUSB_PRBSEL_PCS_OFST (28)
-+#define RG_SSUSB_TXLFPS_PRD_OFST (24)
-+#define RG_SSUSB_P_RX_P0S_CK_OFST (23)
-+#define RG_SSUSB_P_TX_P0S_CK_OFST (22)
-+#define RG_SSUSB_PDNCTL_OFST (16)
-+#define RG_SSUSB_TX_DRV_EN_OFST (15)
-+#define RG_SSUSB_TX_DRV_SEL_OFST (14)
-+#define RG_SSUSB_TX_DRV_DLY_OFST (8)
-+#define RG_SSUSB_BERT_EN_OFST (7)
-+#define RG_SSUSB_SCP_TH_OFST (4)
-+#define RG_SSUSB_SCP_EN_OFST (3)
-+#define RG_SSUSB_RXANSIDEC_TEST_OFST (0)
-+
-+//U3D_PHYD_LFPS0
-+#define RG_SSUSB_LFPS_PWD_OFST (30)
-+#define RG_SSUSB_FORCE_LFPS_PWD_OFST (29)
-+#define RG_SSUSB_RXLFPS_OVF_OFST (24)
-+#define RG_SSUSB_P3_ENTRY_SEL_OFST (23)
-+#define RG_SSUSB_P3_ENTRY_OFST (22)
-+#define RG_SSUSB_RXLFPS_CDRSEL_OFST (20)
-+#define RG_SSUSB_RXLFPS_CDRTH_OFST (16)
-+#define RG_SSUSB_LOCK5G_BLOCK_OFST (15)
-+#define RG_SSUSB_TFIFO_EXT_D_SEL_OFST (14)
-+#define RG_SSUSB_TFIFO_NO_EXTEND_OFST (13)
-+#define RG_SSUSB_RXLFPS_LOB_OFST (8)
-+#define RG_SSUSB_TXLFPS_EN_OFST (7)
-+#define RG_SSUSB_TXLFPS_SEL_OFST (6)
-+#define RG_SSUSB_RXLFPS_CDRLOCK_OFST (5)
-+#define RG_SSUSB_RXLFPS_UPB_OFST (0)
-+
-+//U3D_PHYD_LFPS1
-+#define RG_SSUSB_RX_IMP_BIAS_OFST (28)
-+#define RG_SSUSB_TX_IMP_BIAS_OFST (24)
-+#define RG_SSUSB_FWAKE_TH_OFST (16)
-+#define RG_SSUSB_RXLFPS_UDF_OFST (8)
-+#define RG_SSUSB_RXLFPS_P0IDLETH_OFST (0)
-+
-+//U3D_PHYD_IMPCAL0
-+#define RG_SSUSB_FORCE_TX_IMPSEL_OFST (31)
-+#define RG_SSUSB_TX_IMPCAL_EN_OFST (30)
-+#define RG_SSUSB_FORCE_TX_IMPCAL_EN_OFST (29)
-+#define RG_SSUSB_TX_IMPSEL_OFST (24)
-+#define RG_SSUSB_TX_IMPCAL_CALCYC_OFST (16)
-+#define RG_SSUSB_TX_IMPCAL_STBCYC_OFST (10)
-+#define RG_SSUSB_TX_IMPCAL_CYCCNT_OFST (0)
-+
-+//U3D_PHYD_IMPCAL1
-+#define RG_SSUSB_FORCE_RX_IMPSEL_OFST (31)
-+#define RG_SSUSB_RX_IMPCAL_EN_OFST (30)
-+#define RG_SSUSB_FORCE_RX_IMPCAL_EN_OFST (29)
-+#define RG_SSUSB_RX_IMPSEL_OFST (24)
-+#define RG_SSUSB_RX_IMPCAL_CALCYC_OFST (16)
-+#define RG_SSUSB_RX_IMPCAL_STBCYC_OFST (10)
-+#define RG_SSUSB_RX_IMPCAL_CYCCNT_OFST (0)
-+
-+//U3D_PHYD_TXPLL0
-+#define RG_SSUSB_TXPLL_DDSEN_CYC_OFST (27)
-+#define RG_SSUSB_TXPLL_ON_OFST (26)
-+#define RG_SSUSB_FORCE_TXPLLON_OFST (25)
-+#define RG_SSUSB_TXPLL_STBCYC_OFST (16)
-+#define RG_SSUSB_TXPLL_NCPOCHG_CYC_OFST (12)
-+#define RG_SSUSB_TXPLL_NCPOEN_CYC_OFST (10)
-+#define RG_SSUSB_TXPLL_DDSRSTB_CYC_OFST (0)
-+
-+//U3D_PHYD_TXPLL1
-+#define RG_SSUSB_PLL_NCPO_EN_OFST (31)
-+#define RG_SSUSB_PLL_FIFO_START_MAN_OFST (30)
-+#define RG_SSUSB_PLL_NCPO_CHG_OFST (28)
-+#define RG_SSUSB_PLL_DDS_RSTB_OFST (27)
-+#define RG_SSUSB_PLL_DDS_PWDB_OFST (26)
-+#define RG_SSUSB_PLL_DDSEN_OFST (25)
-+#define RG_SSUSB_PLL_AUTOK_VCO_OFST (24)
-+#define RG_SSUSB_PLL_PWD_OFST (23)
-+#define RG_SSUSB_RX_AFE_PWD_OFST (22)
-+#define RG_SSUSB_PLL_TCADJ_OFST (16)
-+#define RG_SSUSB_FORCE_CDR_TCADJ_OFST (15)
-+#define RG_SSUSB_FORCE_CDR_AUTOK_VCO_OFST (14)
-+#define RG_SSUSB_FORCE_CDR_PWD_OFST (13)
-+#define RG_SSUSB_FORCE_PLL_NCPO_EN_OFST (12)
-+#define RG_SSUSB_FORCE_PLL_FIFO_START_MAN_OFST (11)
-+#define RG_SSUSB_FORCE_PLL_NCPO_CHG_OFST (9)
-+#define RG_SSUSB_FORCE_PLL_DDS_RSTB_OFST (8)
-+#define RG_SSUSB_FORCE_PLL_DDS_PWDB_OFST (7)
-+#define RG_SSUSB_FORCE_PLL_DDSEN_OFST (6)
-+#define RG_SSUSB_FORCE_PLL_TCADJ_OFST (5)
-+#define RG_SSUSB_FORCE_PLL_AUTOK_VCO_OFST (4)
-+#define RG_SSUSB_FORCE_PLL_PWD_OFST (3)
-+#define RG_SSUSB_FLT_1_DISPERR_B_OFST (2)
-+
-+//U3D_PHYD_TXPLL2
-+#define RG_SSUSB_TX_LFPS_EN_OFST (31)
-+#define RG_SSUSB_FORCE_TX_LFPS_EN_OFST (30)
-+#define RG_SSUSB_TX_LFPS_OFST (29)
-+#define RG_SSUSB_FORCE_TX_LFPS_OFST (28)
-+#define RG_SSUSB_RXPLL_STB_OFST (27)
-+#define RG_SSUSB_TXPLL_STB_OFST (26)
-+#define RG_SSUSB_FORCE_RXPLL_STB_OFST (25)
-+#define RG_SSUSB_FORCE_TXPLL_STB_OFST (24)
-+#define RG_SSUSB_RXPLL_REFCKSEL_OFST (16)
-+#define RG_SSUSB_RXPLL_STBMODE_OFST (11)
-+#define RG_SSUSB_RXPLL_ON_OFST (10)
-+#define RG_SSUSB_FORCE_RXPLLON_OFST (9)
-+#define RG_SSUSB_FORCE_RX_AFE_PWD_OFST (8)
-+#define RG_SSUSB_CDR_AUTOK_VCO_OFST (7)
-+#define RG_SSUSB_CDR_PWD_OFST (6)
-+#define RG_SSUSB_CDR_TCADJ_OFST (0)
-+
-+//U3D_PHYD_FL0
-+#define RG_SSUSB_RX_FL_TARGET_OFST (16)
-+#define RG_SSUSB_RX_FL_CYCLECNT_OFST (0)
-+
-+//U3D_PHYD_MIX2
-+#define RG_SSUSB_RX_EQ_RST_OFST (31)
-+#define RG_SSUSB_RX_EQ_RST_SEL_OFST (30)
-+#define RG_SSUSB_RXVAL_RST_OFST (29)
-+#define RG_SSUSB_RXVAL_CNT_OFST (24)
-+#define RG_SSUSB_CDROS_EN_OFST (18)
-+#define RG_SSUSB_CDR_LCKOP_OFST (16)
-+#define RG_SSUSB_RX_FL_LOCKTH_OFST (8)
-+#define RG_SSUSB_RX_FL_OFFSET_OFST (0)
-+
-+//U3D_PHYD_RX0
-+#define RG_SSUSB_T2RLB_BERTH_OFST (24)
-+#define RG_SSUSB_T2RLB_PAT_OFST (16)
-+#define RG_SSUSB_T2RLB_EN_OFST (15)
-+#define RG_SSUSB_T2RLB_BPSCRAMB_OFST (14)
-+#define RG_SSUSB_T2RLB_SERIAL_OFST (13)
-+#define RG_SSUSB_T2RLB_MODE_OFST (11)
-+#define RG_SSUSB_RX_SAOSC_EN_OFST (10)
-+#define RG_SSUSB_RX_SAOSC_EN_SEL_OFST (9)
-+#define RG_SSUSB_RX_DFE_OPTION_OFST (8)
-+#define RG_SSUSB_RX_DFE_EN_OFST (7)
-+#define RG_SSUSB_RX_DFE_EN_SEL_OFST (6)
-+#define RG_SSUSB_RX_EQ_EN_OFST (5)
-+#define RG_SSUSB_RX_EQ_EN_SEL_OFST (4)
-+#define RG_SSUSB_RX_SAOSC_RST_OFST (3)
-+#define RG_SSUSB_RX_SAOSC_RST_SEL_OFST (2)
-+#define RG_SSUSB_RX_DFE_RST_OFST (1)
-+#define RG_SSUSB_RX_DFE_RST_SEL_OFST (0)
-+
-+//U3D_PHYD_T2RLB
-+#define RG_SSUSB_EQTRAIN_CH_MODE_OFST (28)
-+#define RG_SSUSB_PRB_OUT_CPPAT_OFST (27)
-+#define RG_SSUSB_BPANSIENC_OFST (26)
-+#define RG_SSUSB_VALID_EN_OFST (25)
-+#define RG_SSUSB_EBUF_SRST_OFST (24)
-+#define RG_SSUSB_K_EMP_OFST (20)
-+#define RG_SSUSB_K_FUL_OFST (16)
-+#define RG_SSUSB_T2RLB_BDATRST_OFST (12)
-+#define RG_SSUSB_P_T2RLB_SKP_EN_OFST (10)
-+#define RG_SSUSB_T2RLB_PATMODE_OFST (8)
-+#define RG_SSUSB_T2RLB_TSEQCNT_OFST (0)
-+
-+//U3D_PHYD_CPPAT
-+#define RG_SSUSB_CPPAT_PROGRAM_EN_OFST (24)
-+#define RG_SSUSB_CPPAT_TOZ_OFST (21)
-+#define RG_SSUSB_CPPAT_PRBS_EN_OFST (20)
-+#define RG_SSUSB_CPPAT_OUT_TMP2_OFST (16)
-+#define RG_SSUSB_CPPAT_OUT_TMP1_OFST (8)
-+#define RG_SSUSB_CPPAT_OUT_TMP0_OFST (0)
-+
-+//U3D_PHYD_MIX3
-+#define RG_SSUSB_CDR_TCADJ_MINUS_OFST (31)
-+#define RG_SSUSB_P_CDROS_EN_OFST (30)
-+#define RG_SSUSB_P_P2_TX_DRV_DIS_OFST (28)
-+#define RG_SSUSB_CDR_TCADJ_OFFSET_OFST (24)
-+#define RG_SSUSB_PLL_TCADJ_MINUS_OFST (23)
-+#define RG_SSUSB_FORCE_PLL_BIAS_LPF_EN_OFST (20)
-+#define RG_SSUSB_PLL_BIAS_LPF_EN_OFST (19)
-+#define RG_SSUSB_PLL_TCADJ_OFFSET_OFST (16)
-+#define RG_SSUSB_FORCE_PLL_SSCEN_OFST (15)
-+#define RG_SSUSB_PLL_SSCEN_OFST (14)
-+#define RG_SSUSB_FORCE_CDR_PI_PWD_OFST (13)
-+#define RG_SSUSB_CDR_PI_PWD_OFST (12)
-+#define RG_SSUSB_CDR_PI_MODE_OFST (11)
-+#define RG_SSUSB_TXPLL_SSCEN_CYC_OFST (0)
-+
-+//U3D_PHYD_EBUFCTL
-+#define RG_SSUSB_EBUFCTL_OFST (0)
-+
-+//U3D_PHYD_PIPE0
-+#define RG_SSUSB_RXTERMINATION_OFST (30)
-+#define RG_SSUSB_RXEQTRAINING_OFST (29)
-+#define RG_SSUSB_RXPOLARITY_OFST (28)
-+#define RG_SSUSB_TXDEEMPH_OFST (26)
-+#define RG_SSUSB_POWERDOWN_OFST (24)
-+#define RG_SSUSB_TXONESZEROS_OFST (23)
-+#define RG_SSUSB_TXELECIDLE_OFST (22)
-+#define RG_SSUSB_TXDETECTRX_OFST (21)
-+#define RG_SSUSB_PIPE_SEL_OFST (20)
-+#define RG_SSUSB_TXDATAK_OFST (16)
-+#define RG_SSUSB_CDR_STABLE_SEL_OFST (15)
-+#define RG_SSUSB_CDR_STABLE_OFST (14)
-+#define RG_SSUSB_CDR_RSTB_SEL_OFST (13)
-+#define RG_SSUSB_CDR_RSTB_OFST (12)
-+#define RG_SSUSB_P_ERROR_SEL_OFST (4)
-+#define RG_SSUSB_TXMARGIN_OFST (1)
-+#define RG_SSUSB_TXCOMPLIANCE_OFST (0)
-+
-+//U3D_PHYD_PIPE1
-+#define RG_SSUSB_TXDATA_OFST (0)
-+
-+//U3D_PHYD_MIX4
-+#define RG_SSUSB_CDROS_CNT_OFST (24)
-+#define RG_SSUSB_T2RLB_BER_EN_OFST (16)
-+#define RG_SSUSB_T2RLB_BER_RATE_OFST (0)
-+
-+//U3D_PHYD_CKGEN0
-+#define RG_SSUSB_RFIFO_IMPLAT_OFST (27)
-+#define RG_SSUSB_TFIFO_PSEL_OFST (24)
-+#define RG_SSUSB_CKGEN_PSEL_OFST (8)
-+#define RG_SSUSB_RXCK_INV_OFST (0)
-+
-+//U3D_PHYD_MIX5
-+#define RG_SSUSB_PRB_SEL_OFST (16)
-+#define RG_SSUSB_RXPLL_STBCYC_OFST (0)
-+
-+//U3D_PHYD_RESERVED
-+#define RG_SSUSB_PHYD_RESERVE_OFST (0)
-+//#define RG_SSUSB_RX_SIGDET_SEL_OFST (11)
-+//#define RG_SSUSB_RX_SIGDET_EN_OFST (12)
-+//#define RG_SSUSB_RX_PI_CAL_MANUAL_SEL_OFST (9)
-+//#define RG_SSUSB_RX_PI_CAL_MANUAL_EN_OFST (10)
-+
-+//U3D_PHYD_CDR0
-+#define RG_SSUSB_CDR_BIC_LTR_OFST (28)
-+#define RG_SSUSB_CDR_BIC_LTD0_OFST (24)
-+#define RG_SSUSB_CDR_BC_LTD1_OFST (16)
-+#define RG_SSUSB_CDR_BC_LTR_OFST (8)
-+#define RG_SSUSB_CDR_BC_LTD0_OFST (0)
-+
-+//U3D_PHYD_CDR1
-+#define RG_SSUSB_CDR_BIR_LTD1_OFST (24)
-+#define RG_SSUSB_CDR_BIR_LTR_OFST (16)
-+#define RG_SSUSB_CDR_BIR_LTD0_OFST (8)
-+#define RG_SSUSB_CDR_BW_SEL_OFST (6)
-+#define RG_SSUSB_CDR_BIC_LTD1_OFST (0)
-+
-+//U3D_PHYD_PLL_0
-+#define RG_SSUSB_FORCE_CDR_BAND_5G_OFST (28)
-+#define RG_SSUSB_FORCE_CDR_BAND_2P5G_OFST (27)
-+#define RG_SSUSB_FORCE_PLL_BAND_5G_OFST (26)
-+#define RG_SSUSB_FORCE_PLL_BAND_2P5G_OFST (25)
-+#define RG_SSUSB_P_EQ_T_SEL_OFST (15)
-+#define RG_SSUSB_PLL_ISO_EN_CYC_OFST (5)
-+#define RG_SSUSB_PLLBAND_RECAL_OFST (4)
-+#define RG_SSUSB_PLL_DDS_ISO_EN_OFST (3)
-+#define RG_SSUSB_FORCE_PLL_DDS_ISO_EN_OFST (2)
-+#define RG_SSUSB_PLL_DDS_PWR_ON_OFST (1)
-+#define RG_SSUSB_FORCE_PLL_DDS_PWR_ON_OFST (0)
-+
-+//U3D_PHYD_PLL_1
-+#define RG_SSUSB_CDR_BAND_5G_OFST (24)
-+#define RG_SSUSB_CDR_BAND_2P5G_OFST (16)
-+#define RG_SSUSB_PLL_BAND_5G_OFST (8)
-+#define RG_SSUSB_PLL_BAND_2P5G_OFST (0)
-+
-+//U3D_PHYD_BCN_DET_1
-+#define RG_SSUSB_P_BCN_OBS_PRD_OFST (16)
-+#define RG_SSUSB_U_BCN_OBS_PRD_OFST (0)
-+
-+//U3D_PHYD_BCN_DET_2
-+#define RG_SSUSB_P_BCN_OBS_SEL_OFST (16)
-+#define RG_SSUSB_BCN_DET_DIS_OFST (12)
-+#define RG_SSUSB_U_BCN_OBS_SEL_OFST (0)
-+
-+//U3D_EQ0
-+#define RG_SSUSB_EQ_DLHL_LFI_OFST (24)
-+#define RG_SSUSB_EQ_DHHL_LFI_OFST (16)
-+#define RG_SSUSB_EQ_DD0HOS_LFI_OFST (8)
-+#define RG_SSUSB_EQ_DD0LOS_LFI_OFST (0)
-+
-+//U3D_EQ1
-+#define RG_SSUSB_EQ_DD1HOS_LFI_OFST (24)
-+#define RG_SSUSB_EQ_DD1LOS_LFI_OFST (16)
-+#define RG_SSUSB_EQ_DE0OS_LFI_OFST (8)
-+#define RG_SSUSB_EQ_DE1OS_LFI_OFST (0)
-+
-+//U3D_EQ2
-+#define RG_SSUSB_EQ_DLHLOS_LFI_OFST (24)
-+#define RG_SSUSB_EQ_DHHLOS_LFI_OFST (16)
-+#define RG_SSUSB_EQ_STOPTIME_OFST (14)
-+#define RG_SSUSB_EQ_DHHL_LF_SEL_OFST (11)
-+#define RG_SSUSB_EQ_DSAOS_LF_SEL_OFST (8)
-+#define RG_SSUSB_EQ_STARTTIME_OFST (6)
-+#define RG_SSUSB_EQ_DLEQ_LF_SEL_OFST (3)
-+#define RG_SSUSB_EQ_DLHL_LF_SEL_OFST (0)
-+
-+//U3D_EQ3
-+#define RG_SSUSB_EQ_DLEQ_LFI_GEN2_OFST (28)
-+#define RG_SSUSB_EQ_DLEQ_LFI_GEN1_OFST (24)
-+#define RG_SSUSB_EQ_DEYE0OS_LFI_OFST (16)
-+#define RG_SSUSB_EQ_DEYE1OS_LFI_OFST (8)
-+#define RG_SSUSB_EQ_TRI_DET_EN_OFST (7)
-+#define RG_SSUSB_EQ_TRI_DET_TH_OFST (0)
-+
-+//U3D_EQ_EYE0
-+#define RG_SSUSB_EQ_EYE_XOFFSET_OFST (25)
-+#define RG_SSUSB_EQ_EYE_MON_EN_OFST (24)
-+#define RG_SSUSB_EQ_EYE0_Y_OFST (16)
-+#define RG_SSUSB_EQ_EYE1_Y_OFST (8)
-+#define RG_SSUSB_EQ_PILPO_ROUT_OFST (7)
-+#define RG_SSUSB_EQ_PI_KPGAIN_OFST (4)
-+#define RG_SSUSB_EQ_EYE_CNT_EN_OFST (3)
-+
-+//U3D_EQ_EYE1
-+#define RG_SSUSB_EQ_SIGDET_OFST (24)
-+#define RG_SSUSB_EQ_EYE_MASK_OFST (7)
-+
-+//U3D_EQ_EYE2
-+#define RG_SSUSB_EQ_RX500M_CK_SEL_OFST (31)
-+#define RG_SSUSB_EQ_SD_CNT1_OFST (24)
-+#define RG_SSUSB_EQ_ISIFLAG_SEL_OFST (22)
-+#define RG_SSUSB_EQ_SD_CNT0_OFST (16)
-+
-+//U3D_EQ_DFE0
-+#define RG_SSUSB_EQ_LEQMAX_OFST (28)
-+#define RG_SSUSB_EQ_DFEX_EN_OFST (27)
-+#define RG_SSUSB_EQ_DFEX_LF_SEL_OFST (24)
-+#define RG_SSUSB_EQ_CHK_EYE_H_OFST (23)
-+#define RG_SSUSB_EQ_PIEYE_INI_OFST (16)
-+#define RG_SSUSB_EQ_PI90_INI_OFST (8)
-+#define RG_SSUSB_EQ_PI0_INI_OFST (0)
-+
-+//U3D_EQ_DFE1
-+#define RG_SSUSB_EQ_REV_OFST (16)
-+#define RG_SSUSB_EQ_DFEYEN_DUR_OFST (12)
-+#define RG_SSUSB_EQ_DFEXEN_DUR_OFST (8)
-+#define RG_SSUSB_EQ_DFEX_RST_OFST (7)
-+#define RG_SSUSB_EQ_GATED_RXD_B_OFST (6)
-+#define RG_SSUSB_EQ_PI90CK_SEL_OFST (4)
-+#define RG_SSUSB_EQ_DFEX_DIS_OFST (2)
-+#define RG_SSUSB_EQ_DFEYEN_STOP_DIS_OFST (1)
-+#define RG_SSUSB_EQ_DFEXEN_SEL_OFST (0)
-+
-+//U3D_EQ_DFE2
-+#define RG_SSUSB_EQ_MON_SEL_OFST (24)
-+#define RG_SSUSB_EQ_LEQOSC_DLYCNT_OFST (16)
-+#define RG_SSUSB_EQ_DLEQOS_LFI_OFST (8)
-+#define RG_SSUSB_EQ_LEQ_STOP_TO_OFST (0)
-+
-+//U3D_EQ_DFE3
-+#define RG_SSUSB_EQ_RESERVED_OFST (0)
-+
-+//U3D_PHYD_MON0
-+#define RGS_SSUSB_BERT_BERC_OFST (16)
-+#define RGS_SSUSB_LFPS_OFST (12)
-+#define RGS_SSUSB_TRAINDEC_OFST (8)
-+#define RGS_SSUSB_SCP_PAT_OFST (0)
-+
-+//U3D_PHYD_MON1
-+#define RGS_SSUSB_RX_FL_OUT_OFST (0)
-+
-+//U3D_PHYD_MON2
-+#define RGS_SSUSB_T2RLB_ERRCNT_OFST (16)
-+#define RGS_SSUSB_RETRACK_OFST (12)
-+#define RGS_SSUSB_RXPLL_LOCK_OFST (10)
-+#define RGS_SSUSB_CDR_VCOCAL_CPLT_D_OFST (9)
-+#define RGS_SSUSB_PLL_VCOCAL_CPLT_D_OFST (8)
-+#define RGS_SSUSB_PDNCTL_OFST (0)
-+
-+//U3D_PHYD_MON3
-+#define RGS_SSUSB_TSEQ_ERRCNT_OFST (16)
-+#define RGS_SSUSB_PRBS_ERRCNT_OFST (0)
-+
-+//U3D_PHYD_MON4
-+#define RGS_SSUSB_RX_LSLOCK_CNT_OFST (24)
-+#define RGS_SSUSB_SCP_DETCNT_OFST (16)
-+#define RGS_SSUSB_TSEQ_DETCNT_OFST (0)
-+
-+//U3D_PHYD_MON5
-+#define RGS_SSUSB_EBUFMSG_OFST (16)
-+#define RGS_SSUSB_BERT_LOCK_OFST (15)
-+#define RGS_SSUSB_SCP_DET_OFST (14)
-+#define RGS_SSUSB_TSEQ_DET_OFST (13)
-+#define RGS_SSUSB_EBUF_UDF_OFST (12)
-+#define RGS_SSUSB_EBUF_OVF_OFST (11)
-+#define RGS_SSUSB_PRBS_PASSTH_OFST (10)
-+#define RGS_SSUSB_PRBS_PASS_OFST (9)
-+#define RGS_SSUSB_PRBS_LOCK_OFST (8)
-+#define RGS_SSUSB_T2RLB_ERR_OFST (6)
-+#define RGS_SSUSB_T2RLB_PASSTH_OFST (5)
-+#define RGS_SSUSB_T2RLB_PASS_OFST (4)
-+#define RGS_SSUSB_T2RLB_LOCK_OFST (3)
-+#define RGS_SSUSB_RX_IMPCAL_DONE_OFST (2)
-+#define RGS_SSUSB_TX_IMPCAL_DONE_OFST (1)
-+#define RGS_SSUSB_RXDETECTED_OFST (0)
-+
-+//U3D_PHYD_MON6
-+#define RGS_SSUSB_SIGCAL_DONE_OFST (30)
-+#define RGS_SSUSB_SIGCAL_CAL_OUT_OFST (29)
-+#define RGS_SSUSB_SIGCAL_OFFSET_OFST (24)
-+#define RGS_SSUSB_RX_IMP_SEL_OFST (16)
-+#define RGS_SSUSB_TX_IMP_SEL_OFST (8)
-+#define RGS_SSUSB_TFIFO_MSG_OFST (4)
-+#define RGS_SSUSB_RFIFO_MSG_OFST (0)
-+
-+//U3D_PHYD_MON7
-+#define RGS_SSUSB_FT_OUT_OFST (8)
-+#define RGS_SSUSB_PRB_OUT_OFST (0)
-+
-+//U3D_PHYA_RX_MON0
-+#define RGS_SSUSB_EQ_DCLEQ_OFST (24)
-+#define RGS_SSUSB_EQ_DCD0H_OFST (16)
-+#define RGS_SSUSB_EQ_DCD0L_OFST (8)
-+#define RGS_SSUSB_EQ_DCD1H_OFST (0)
-+
-+//U3D_PHYA_RX_MON1
-+#define RGS_SSUSB_EQ_DCD1L_OFST (24)
-+#define RGS_SSUSB_EQ_DCE0_OFST (16)
-+#define RGS_SSUSB_EQ_DCE1_OFST (8)
-+#define RGS_SSUSB_EQ_DCHHL_OFST (0)
-+
-+//U3D_PHYA_RX_MON2
-+#define RGS_SSUSB_EQ_LEQ_STOP_OFST (31)
-+#define RGS_SSUSB_EQ_DCLHL_OFST (24)
-+#define RGS_SSUSB_EQ_STATUS_OFST (16)
-+#define RGS_SSUSB_EQ_DCEYE0_OFST (8)
-+#define RGS_SSUSB_EQ_DCEYE1_OFST (0)
-+
-+//U3D_PHYA_RX_MON3
-+#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0_OFST (0)
-+
-+//U3D_PHYA_RX_MON4
-+#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1_OFST (0)
-+
-+//U3D_PHYA_RX_MON5
-+#define RGS_SSUSB_EQ_DCLEQOS_OFST (8)
-+#define RGS_SSUSB_EQ_EYE_CNT_RDY_OFST (7)
-+#define RGS_SSUSB_EQ_PILPO_OFST (0)
-+
-+//U3D_PHYD_CPPAT2
-+#define RG_SSUSB_CPPAT_OUT_H_TMP2_OFST (16)
-+#define RG_SSUSB_CPPAT_OUT_H_TMP1_OFST (8)
-+#define RG_SSUSB_CPPAT_OUT_H_TMP0_OFST (0)
-+
-+//U3D_EQ_EYE3
-+#define RG_SSUSB_EQ_LEQ_SHIFT_OFST (24)
-+#define RG_SSUSB_EQ_EYE_CNT_OFST (0)
-+
-+//U3D_KBAND_OUT
-+#define RGS_SSUSB_CDR_BAND_5G_OFST (24)
-+#define RGS_SSUSB_CDR_BAND_2P5G_OFST (16)
-+#define RGS_SSUSB_PLL_BAND_5G_OFST (8)
-+#define RGS_SSUSB_PLL_BAND_2P5G_OFST (0)
-+
-+//U3D_KBAND_OUT1
-+#define RGS_SSUSB_CDR_VCOCAL_FAIL_OFST (24)
-+#define RGS_SSUSB_CDR_VCOCAL_STATE_OFST (16)
-+#define RGS_SSUSB_PLL_VCOCAL_FAIL_OFST (8)
-+#define RGS_SSUSB_PLL_VCOCAL_STATE_OFST (0)
-+
-+
-+///////////////////////////////////////////////////////////////////////////////
-+
-+struct u3phyd_bank2_reg {
-+ //0x0
-+ PHY_LE32 b2_phyd_top1;
-+ PHY_LE32 b2_phyd_top2;
-+ PHY_LE32 b2_phyd_top3;
-+ PHY_LE32 b2_phyd_top4;
-+ //0x10
-+ PHY_LE32 b2_phyd_top5;
-+ PHY_LE32 b2_phyd_top6;
-+ PHY_LE32 b2_phyd_top7;
-+ PHY_LE32 b2_phyd_p_sigdet1;
-+ //0x20
-+ PHY_LE32 b2_phyd_p_sigdet2;
-+ PHY_LE32 b2_phyd_p_sigdet_cal1;
-+ PHY_LE32 b2_phyd_rxdet1;
-+ PHY_LE32 b2_phyd_rxdet2;
-+ //0x30
-+ PHY_LE32 b2_phyd_misc0;
-+ PHY_LE32 b2_phyd_misc2;
-+ PHY_LE32 b2_phyd_misc3;
-+ PHY_LE32 reserve0;
-+ //0x40
-+ PHY_LE32 b2_rosc_0;
-+ PHY_LE32 b2_rosc_1;
-+ PHY_LE32 b2_rosc_2;
-+ PHY_LE32 b2_rosc_3;
-+ //0x50
-+ PHY_LE32 b2_rosc_4;
-+ PHY_LE32 b2_rosc_5;
-+ PHY_LE32 b2_rosc_6;
-+ PHY_LE32 b2_rosc_7;
-+ //0x60
-+ PHY_LE32 b2_rosc_8;
-+ PHY_LE32 b2_rosc_9;
-+ PHY_LE32 b2_rosc_a;
-+ PHY_LE32 reserve1;
-+ //0x70~0xd0
-+ PHY_LE32 reserve2[28];
-+ //0xe0
-+ PHY_LE32 phyd_version;
-+ PHY_LE32 phyd_model;
-+};
-+
-+//U3D_B2_PHYD_TOP1
-+#define RG_SSUSB_PCIE2_K_EMP (0xf<<28) //31:28
-+#define RG_SSUSB_PCIE2_K_FUL (0xf<<24) //27:24
-+#define RG_SSUSB_TX_EIDLE_LP_EN (0x1<<17) //17:17
-+#define RG_SSUSB_FORCE_TX_EIDLE_LP_EN (0x1<<16) //16:16
-+#define RG_SSUSB_SIGDET_EN (0x1<<15) //15:15
-+#define RG_SSUSB_FORCE_SIGDET_EN (0x1<<14) //14:14
-+#define RG_SSUSB_CLKRX_EN (0x1<<13) //13:13
-+#define RG_SSUSB_FORCE_CLKRX_EN (0x1<<12) //12:12
-+#define RG_SSUSB_CLKTX_EN (0x1<<11) //11:11
-+#define RG_SSUSB_FORCE_CLKTX_EN (0x1<<10) //10:10
-+#define RG_SSUSB_CLK_REQ_N_I (0x1<<9) //9:9
-+#define RG_SSUSB_FORCE_CLK_REQ_N_I (0x1<<8) //8:8
-+#define RG_SSUSB_RATE (0x1<<6) //6:6
-+#define RG_SSUSB_FORCE_RATE (0x1<<5) //5:5
-+#define RG_SSUSB_PCIE_MODE_SEL (0x1<<4) //4:4
-+#define RG_SSUSB_FORCE_PCIE_MODE_SEL (0x1<<3) //3:3
-+#define RG_SSUSB_PHY_MODE (0x3<<1) //2:1
-+#define RG_SSUSB_FORCE_PHY_MODE (0x1<<0) //0:0
-+
-+//U3D_B2_PHYD_TOP2
-+#define RG_SSUSB_FORCE_IDRV_6DB (0x1<<30) //30:30
-+#define RG_SSUSB_IDRV_6DB (0x3f<<24) //29:24
-+#define RG_SSUSB_FORCE_IDEM_3P5DB (0x1<<22) //22:22
-+#define RG_SSUSB_IDEM_3P5DB (0x3f<<16) //21:16
-+#define RG_SSUSB_FORCE_IDRV_3P5DB (0x1<<14) //14:14
-+#define RG_SSUSB_IDRV_3P5DB (0x3f<<8) //13:8
-+#define RG_SSUSB_FORCE_IDRV_0DB (0x1<<6) //6:6
-+#define RG_SSUSB_IDRV_0DB (0x3f<<0) //5:0
-+
-+//U3D_B2_PHYD_TOP3
-+#define RG_SSUSB_TX_BIASI (0x7<<25) //27:25
-+#define RG_SSUSB_FORCE_TX_BIASI_EN (0x1<<24) //24:24
-+#define RG_SSUSB_TX_BIASI_EN (0x1<<16) //16:16
-+#define RG_SSUSB_FORCE_TX_BIASI (0x1<<13) //13:13
-+#define RG_SSUSB_FORCE_IDEM_6DB (0x1<<8) //8:8
-+#define RG_SSUSB_IDEM_6DB (0x3f<<0) //5:0
-+
-+//U3D_B2_PHYD_TOP4
-+#define RG_SSUSB_G1_CDR_BIC_LTR (0xf<<28) //31:28
-+#define RG_SSUSB_G1_CDR_BIC_LTD0 (0xf<<24) //27:24
-+#define RG_SSUSB_G1_CDR_BC_LTD1 (0x1f<<16) //20:16
-+#define RG_SSUSB_G1_CDR_BC_LTR (0x1f<<8) //12:8
-+#define RG_SSUSB_G1_CDR_BC_LTD0 (0x1f<<0) //4:0
-+
-+//U3D_B2_PHYD_TOP5
-+#define RG_SSUSB_G1_CDR_BIR_LTD1 (0x1f<<24) //28:24
-+#define RG_SSUSB_G1_CDR_BIR_LTR (0x1f<<16) //20:16
-+#define RG_SSUSB_G1_CDR_BIR_LTD0 (0x1f<<8) //12:8
-+#define RG_SSUSB_G1_CDR_BIC_LTD1 (0xf<<0) //3:0
-+
-+//U3D_B2_PHYD_TOP6
-+#define RG_SSUSB_G2_CDR_BIC_LTR (0xf<<28) //31:28
-+#define RG_SSUSB_G2_CDR_BIC_LTD0 (0xf<<24) //27:24
-+#define RG_SSUSB_G2_CDR_BC_LTD1 (0x1f<<16) //20:16
-+#define RG_SSUSB_G2_CDR_BC_LTR (0x1f<<8) //12:8
-+#define RG_SSUSB_G2_CDR_BC_LTD0 (0x1f<<0) //4:0
-+
-+//U3D_B2_PHYD_TOP7
-+#define RG_SSUSB_G2_CDR_BIR_LTD1 (0x1f<<24) //28:24
-+#define RG_SSUSB_G2_CDR_BIR_LTR (0x1f<<16) //20:16
-+#define RG_SSUSB_G2_CDR_BIR_LTD0 (0x1f<<8) //12:8
-+#define RG_SSUSB_G2_CDR_BIC_LTD1 (0xf<<0) //3:0
-+
-+//U3D_B2_PHYD_P_SIGDET1
-+#define RG_SSUSB_P_SIGDET_FLT_DIS (0x1<<31) //31:31
-+#define RG_SSUSB_P_SIGDET_FLT_G2_DEAST_SEL (0x7f<<24) //30:24
-+#define RG_SSUSB_P_SIGDET_FLT_G1_DEAST_SEL (0x7f<<16) //22:16
-+#define RG_SSUSB_P_SIGDET_FLT_P2_AST_SEL (0x7f<<8) //14:8
-+#define RG_SSUSB_P_SIGDET_FLT_PX_AST_SEL (0x7f<<0) //6:0
-+
-+//U3D_B2_PHYD_P_SIGDET2
-+#define RG_SSUSB_P_SIGDET_RX_VAL_S (0x1<<29) //29:29
-+#define RG_SSUSB_P_SIGDET_L0S_DEAS_SEL (0x1<<28) //28:28
-+#define RG_SSUSB_P_SIGDET_L0_EXIT_S (0x1<<27) //27:27
-+#define RG_SSUSB_P_SIGDET_L0S_EXIT_T_S (0x3<<25) //26:25
-+#define RG_SSUSB_P_SIGDET_L0S_EXIT_S (0x1<<24) //24:24
-+#define RG_SSUSB_P_SIGDET_L0S_ENTRY_S (0x1<<16) //16:16
-+#define RG_SSUSB_P_SIGDET_PRB_SEL (0x1<<10) //10:10
-+#define RG_SSUSB_P_SIGDET_BK_SIG_T (0x3<<8) //9:8
-+#define RG_SSUSB_P_SIGDET_P2_RXLFPS (0x1<<6) //6:6
-+#define RG_SSUSB_P_SIGDET_NON_BK_AD (0x1<<5) //5:5
-+#define RG_SSUSB_P_SIGDET_BK_B_RXEQ (0x1<<4) //4:4
-+#define RG_SSUSB_P_SIGDET_G2_KO_SEL (0x3<<2) //3:2
-+#define RG_SSUSB_P_SIGDET_G1_KO_SEL (0x3<<0) //1:0
-+
-+//U3D_B2_PHYD_P_SIGDET_CAL1
-+#define RG_SSUSB_P_SIGDET_CAL_OFFSET (0x1f<<24) //28:24
-+#define RG_SSUSB_P_FORCE_SIGDET_CAL_OFFSET (0x1<<16) //16:16
-+#define RG_SSUSB_P_SIGDET_CAL_EN (0x1<<8) //8:8
-+#define RG_SSUSB_P_FORCE_SIGDET_CAL_EN (0x1<<3) //3:3
-+#define RG_SSUSB_P_SIGDET_FLT_EN (0x1<<2) //2:2
-+#define RG_SSUSB_P_SIGDET_SAMPLE_PRD (0x1<<1) //1:1
-+#define RG_SSUSB_P_SIGDET_REK (0x1<<0) //0:0
-+
-+//U3D_B2_PHYD_RXDET1
-+#define RG_SSUSB_RXDET_PRB_SEL (0x1<<31) //31:31
-+#define RG_SSUSB_FORCE_CMDET (0x1<<30) //30:30
-+#define RG_SSUSB_RXDET_EN (0x1<<29) //29:29
-+#define RG_SSUSB_FORCE_RXDET_EN (0x1<<28) //28:28
-+#define RG_SSUSB_RXDET_K_TWICE (0x1<<27) //27:27
-+#define RG_SSUSB_RXDET_STB3_SET (0x1ff<<18) //26:18
-+#define RG_SSUSB_RXDET_STB2_SET (0x1ff<<9) //17:9
-+#define RG_SSUSB_RXDET_STB1_SET (0x1ff<<0) //8:0
-+
-+//U3D_B2_PHYD_RXDET2
-+#define RG_SSUSB_PHYD_TRAINDEC_FORCE_CGEN (0x1<<31) //31:31
-+#define RG_SSUSB_PHYD_BERTLB_FORCE_CGEN (0x1<<30) //30:30
-+#define RG_SSUSB_PHYD_T2RLB_FORCE_CGEN (0x1<<29) //29:29
-+#define RG_SSUSB_PDN_T_SEL (0x3<<18) //19:18
-+#define RG_SSUSB_RXDET_STB3_SET_P3 (0x1ff<<9) //17:9
-+#define RG_SSUSB_RXDET_STB2_SET_P3 (0x1ff<<0) //8:0
-+
-+//U3D_B2_PHYD_MISC0
-+#define RG_SSUSB_FORCE_PLL_DDS_HF_EN (0x1<<22) //22:22
-+#define RG_SSUSB_PLL_DDS_HF_EN_MAN (0x1<<21) //21:21
-+#define RG_SSUSB_RXLFPS_ENTXDRV (0x1<<20) //20:20
-+#define RG_SSUSB_RX_FL_UNLOCKTH (0xf<<16) //19:16
-+#define RG_SSUSB_LFPS_PSEL (0x1<<15) //15:15
-+#define RG_SSUSB_RX_SIGDET_EN (0x1<<14) //14:14
-+#define RG_SSUSB_RX_SIGDET_EN_SEL (0x1<<13) //13:13
-+#define RG_SSUSB_RX_PI_CAL_EN (0x1<<12) //12:12
-+#define RG_SSUSB_RX_PI_CAL_EN_SEL (0x1<<11) //11:11
-+#define RG_SSUSB_P3_CLS_CK_SEL (0x1<<10) //10:10
-+#define RG_SSUSB_T2RLB_PSEL (0x3<<8) //9:8
-+#define RG_SSUSB_PPCTL_PSEL (0x7<<5) //7:5
-+#define RG_SSUSB_PHYD_TX_DATA_INV (0x1<<4) //4:4
-+#define RG_SSUSB_BERTLB_PSEL (0x3<<2) //3:2
-+#define RG_SSUSB_RETRACK_DIS (0x1<<1) //1:1
-+#define RG_SSUSB_PPERRCNT_CLR (0x1<<0) //0:0
-+
-+//U3D_B2_PHYD_MISC2
-+#define RG_SSUSB_FRC_PLL_DDS_PREDIV2 (0x1<<31) //31:31
-+#define RG_SSUSB_FRC_PLL_DDS_IADJ (0xf<<27) //30:27
-+#define RG_SSUSB_P_SIGDET_125FILTER (0x1<<26) //26:26
-+#define RG_SSUSB_P_SIGDET_RST_FILTER (0x1<<25) //25:25
-+#define RG_SSUSB_P_SIGDET_EID_USE_RAW (0x1<<24) //24:24
-+#define RG_SSUSB_P_SIGDET_LTD_USE_RAW (0x1<<23) //23:23
-+#define RG_SSUSB_EIDLE_BF_RXDET (0x1<<22) //22:22
-+#define RG_SSUSB_EIDLE_LP_STBCYC (0x1ff<<13) //21:13
-+#define RG_SSUSB_TX_EIDLE_LP_POSTDLY (0x3f<<7) //12:7
-+#define RG_SSUSB_TX_EIDLE_LP_PREDLY (0x3f<<1) //6:1
-+#define RG_SSUSB_TX_EIDLE_LP_EN_ADV (0x1<<0) //0:0
-+
-+//U3D_B2_PHYD_MISC3
-+#define RGS_SSUSB_DDS_CALIB_C_STATE (0x7<<16) //18:16
-+#define RGS_SSUSB_PPERRCNT (0xffff<<0) //15:0
-+
-+//U3D_B2_ROSC_0
-+#define RG_SSUSB_RING_OSC_CNTEND (0x1ff<<23) //31:23
-+#define RG_SSUSB_XTAL_OSC_CNTEND (0x7f<<16) //22:16
-+#define RG_SSUSB_RING_OSC_EN (0x1<<3) //3:3
-+#define RG_SSUSB_RING_OSC_FORCE_EN (0x1<<2) //2:2
-+#define RG_SSUSB_FRC_RING_BYPASS_DET (0x1<<1) //1:1
-+#define RG_SSUSB_RING_BYPASS_DET (0x1<<0) //0:0
-+
-+//U3D_B2_ROSC_1
-+#define RG_SSUSB_RING_OSC_FRC_P3 (0x1<<20) //20:20
-+#define RG_SSUSB_RING_OSC_P3 (0x1<<19) //19:19
-+#define RG_SSUSB_RING_OSC_FRC_RECAL (0x3<<17) //18:17
-+#define RG_SSUSB_RING_OSC_RECAL (0x1<<16) //16:16
-+#define RG_SSUSB_RING_OSC_SEL (0xff<<8) //15:8
-+#define RG_SSUSB_RING_OSC_FRC_SEL (0x1<<0) //0:0
-+
-+//U3D_B2_ROSC_2
-+#define RG_SSUSB_RING_DET_STRCYC2 (0xffff<<16) //31:16
-+#define RG_SSUSB_RING_DET_STRCYC1 (0xffff<<0) //15:0
-+
-+//U3D_B2_ROSC_3
-+#define RG_SSUSB_RING_DET_DETWIN1 (0xffff<<16) //31:16
-+#define RG_SSUSB_RING_DET_STRCYC3 (0xffff<<0) //15:0
-+
-+//U3D_B2_ROSC_4
-+#define RG_SSUSB_RING_DET_DETWIN3 (0xffff<<16) //31:16
-+#define RG_SSUSB_RING_DET_DETWIN2 (0xffff<<0) //15:0
-+
-+//U3D_B2_ROSC_5
-+#define RG_SSUSB_RING_DET_LBOND1 (0xffff<<16) //31:16
-+#define RG_SSUSB_RING_DET_UBOND1 (0xffff<<0) //15:0
-+
-+//U3D_B2_ROSC_6
-+#define RG_SSUSB_RING_DET_LBOND2 (0xffff<<16) //31:16
-+#define RG_SSUSB_RING_DET_UBOND2 (0xffff<<0) //15:0
-+
-+//U3D_B2_ROSC_7
-+#define RG_SSUSB_RING_DET_LBOND3 (0xffff<<16) //31:16
-+#define RG_SSUSB_RING_DET_UBOND3 (0xffff<<0) //15:0
-+
-+//U3D_B2_ROSC_8
-+#define RG_SSUSB_RING_RESERVE (0xffff<<16) //31:16
-+#define RG_SSUSB_ROSC_PROB_SEL (0xf<<2) //5:2
-+#define RG_SSUSB_RING_FREQMETER_EN (0x1<<1) //1:1
-+#define RG_SSUSB_RING_DET_BPS_UBOND (0x1<<0) //0:0
-+
-+//U3D_B2_ROSC_9
-+#define RGS_FM_RING_CNT (0xffff<<16) //31:16
-+#define RGS_SSUSB_RING_OSC_STATE (0x3<<10) //11:10
-+#define RGS_SSUSB_RING_OSC_STABLE (0x1<<9) //9:9
-+#define RGS_SSUSB_RING_OSC_CAL_FAIL (0x1<<8) //8:8
-+#define RGS_SSUSB_RING_OSC_CAL (0xff<<0) //7:0
-+
-+//U3D_B2_ROSC_A
-+#define RGS_SSUSB_ROSC_PROB_OUT (0xff<<0) //7:0
-+
-+//U3D_PHYD_VERSION
-+#define RGS_SSUSB_PHYD_VERSION (0xffffffff<<0) //31:0
-+
-+//U3D_PHYD_MODEL
-+#define RGS_SSUSB_PHYD_MODEL (0xffffffff<<0) //31:0
-+
-+
-+/* OFFSET */
-+
-+//U3D_B2_PHYD_TOP1
-+#define RG_SSUSB_PCIE2_K_EMP_OFST (28)
-+#define RG_SSUSB_PCIE2_K_FUL_OFST (24)
-+#define RG_SSUSB_TX_EIDLE_LP_EN_OFST (17)
-+#define RG_SSUSB_FORCE_TX_EIDLE_LP_EN_OFST (16)
-+#define RG_SSUSB_SIGDET_EN_OFST (15)
-+#define RG_SSUSB_FORCE_SIGDET_EN_OFST (14)
-+#define RG_SSUSB_CLKRX_EN_OFST (13)
-+#define RG_SSUSB_FORCE_CLKRX_EN_OFST (12)
-+#define RG_SSUSB_CLKTX_EN_OFST (11)
-+#define RG_SSUSB_FORCE_CLKTX_EN_OFST (10)
-+#define RG_SSUSB_CLK_REQ_N_I_OFST (9)
-+#define RG_SSUSB_FORCE_CLK_REQ_N_I_OFST (8)
-+#define RG_SSUSB_RATE_OFST (6)
-+#define RG_SSUSB_FORCE_RATE_OFST (5)
-+#define RG_SSUSB_PCIE_MODE_SEL_OFST (4)
-+#define RG_SSUSB_FORCE_PCIE_MODE_SEL_OFST (3)
-+#define RG_SSUSB_PHY_MODE_OFST (1)
-+#define RG_SSUSB_FORCE_PHY_MODE_OFST (0)
-+
-+//U3D_B2_PHYD_TOP2
-+#define RG_SSUSB_FORCE_IDRV_6DB_OFST (30)
-+#define RG_SSUSB_IDRV_6DB_OFST (24)
-+#define RG_SSUSB_FORCE_IDEM_3P5DB_OFST (22)
-+#define RG_SSUSB_IDEM_3P5DB_OFST (16)
-+#define RG_SSUSB_FORCE_IDRV_3P5DB_OFST (14)
-+#define RG_SSUSB_IDRV_3P5DB_OFST (8)
-+#define RG_SSUSB_FORCE_IDRV_0DB_OFST (6)
-+#define RG_SSUSB_IDRV_0DB_OFST (0)
-+
-+//U3D_B2_PHYD_TOP3
-+#define RG_SSUSB_TX_BIASI_OFST (25)
-+#define RG_SSUSB_FORCE_TX_BIASI_EN_OFST (24)
-+#define RG_SSUSB_TX_BIASI_EN_OFST (16)
-+#define RG_SSUSB_FORCE_TX_BIASI_OFST (13)
-+#define RG_SSUSB_FORCE_IDEM_6DB_OFST (8)
-+#define RG_SSUSB_IDEM_6DB_OFST (0)
-+
-+//U3D_B2_PHYD_TOP4
-+#define RG_SSUSB_G1_CDR_BIC_LTR_OFST (28)
-+#define RG_SSUSB_G1_CDR_BIC_LTD0_OFST (24)
-+#define RG_SSUSB_G1_CDR_BC_LTD1_OFST (16)
-+#define RG_SSUSB_G1_CDR_BC_LTR_OFST (8)
-+#define RG_SSUSB_G1_CDR_BC_LTD0_OFST (0)
-+
-+//U3D_B2_PHYD_TOP5
-+#define RG_SSUSB_G1_CDR_BIR_LTD1_OFST (24)
-+#define RG_SSUSB_G1_CDR_BIR_LTR_OFST (16)
-+#define RG_SSUSB_G1_CDR_BIR_LTD0_OFST (8)
-+#define RG_SSUSB_G1_CDR_BIC_LTD1_OFST (0)
-+
-+//U3D_B2_PHYD_TOP6
-+#define RG_SSUSB_G2_CDR_BIC_LTR_OFST (28)
-+#define RG_SSUSB_G2_CDR_BIC_LTD0_OFST (24)
-+#define RG_SSUSB_G2_CDR_BC_LTD1_OFST (16)
-+#define RG_SSUSB_G2_CDR_BC_LTR_OFST (8)
-+#define RG_SSUSB_G2_CDR_BC_LTD0_OFST (0)
-+
-+//U3D_B2_PHYD_TOP7
-+#define RG_SSUSB_G2_CDR_BIR_LTD1_OFST (24)
-+#define RG_SSUSB_G2_CDR_BIR_LTR_OFST (16)
-+#define RG_SSUSB_G2_CDR_BIR_LTD0_OFST (8)
-+#define RG_SSUSB_G2_CDR_BIC_LTD1_OFST (0)
-+
-+//U3D_B2_PHYD_P_SIGDET1
-+#define RG_SSUSB_P_SIGDET_FLT_DIS_OFST (31)
-+#define RG_SSUSB_P_SIGDET_FLT_G2_DEAST_SEL_OFST (24)
-+#define RG_SSUSB_P_SIGDET_FLT_G1_DEAST_SEL_OFST (16)
-+#define RG_SSUSB_P_SIGDET_FLT_P2_AST_SEL_OFST (8)
-+#define RG_SSUSB_P_SIGDET_FLT_PX_AST_SEL_OFST (0)
-+
-+//U3D_B2_PHYD_P_SIGDET2
-+#define RG_SSUSB_P_SIGDET_RX_VAL_S_OFST (29)
-+#define RG_SSUSB_P_SIGDET_L0S_DEAS_SEL_OFST (28)
-+#define RG_SSUSB_P_SIGDET_L0_EXIT_S_OFST (27)
-+#define RG_SSUSB_P_SIGDET_L0S_EXIT_T_S_OFST (25)
-+#define RG_SSUSB_P_SIGDET_L0S_EXIT_S_OFST (24)
-+#define RG_SSUSB_P_SIGDET_L0S_ENTRY_S_OFST (16)
-+#define RG_SSUSB_P_SIGDET_PRB_SEL_OFST (10)
-+#define RG_SSUSB_P_SIGDET_BK_SIG_T_OFST (8)
-+#define RG_SSUSB_P_SIGDET_P2_RXLFPS_OFST (6)
-+#define RG_SSUSB_P_SIGDET_NON_BK_AD_OFST (5)
-+#define RG_SSUSB_P_SIGDET_BK_B_RXEQ_OFST (4)
-+#define RG_SSUSB_P_SIGDET_G2_KO_SEL_OFST (2)
-+#define RG_SSUSB_P_SIGDET_G1_KO_SEL_OFST (0)
-+
-+//U3D_B2_PHYD_P_SIGDET_CAL1
-+#define RG_SSUSB_P_SIGDET_CAL_OFFSET_OFST (24)
-+#define RG_SSUSB_P_FORCE_SIGDET_CAL_OFFSET_OFST (16)
-+#define RG_SSUSB_P_SIGDET_CAL_EN_OFST (8)
-+#define RG_SSUSB_P_FORCE_SIGDET_CAL_EN_OFST (3)
-+#define RG_SSUSB_P_SIGDET_FLT_EN_OFST (2)
-+#define RG_SSUSB_P_SIGDET_SAMPLE_PRD_OFST (1)
-+#define RG_SSUSB_P_SIGDET_REK_OFST (0)
-+
-+//U3D_B2_PHYD_RXDET1
-+#define RG_SSUSB_RXDET_PRB_SEL_OFST (31)
-+#define RG_SSUSB_FORCE_CMDET_OFST (30)
-+#define RG_SSUSB_RXDET_EN_OFST (29)
-+#define RG_SSUSB_FORCE_RXDET_EN_OFST (28)
-+#define RG_SSUSB_RXDET_K_TWICE_OFST (27)
-+#define RG_SSUSB_RXDET_STB3_SET_OFST (18)
-+#define RG_SSUSB_RXDET_STB2_SET_OFST (9)
-+#define RG_SSUSB_RXDET_STB1_SET_OFST (0)
-+
-+//U3D_B2_PHYD_RXDET2
-+#define RG_SSUSB_PHYD_TRAINDEC_FORCE_CGEN_OFST (31)
-+#define RG_SSUSB_PHYD_BERTLB_FORCE_CGEN_OFST (30)
-+#define RG_SSUSB_PHYD_T2RLB_FORCE_CGEN_OFST (29)
-+#define RG_SSUSB_PDN_T_SEL_OFST (18)
-+#define RG_SSUSB_RXDET_STB3_SET_P3_OFST (9)
-+#define RG_SSUSB_RXDET_STB2_SET_P3_OFST (0)
-+
-+//U3D_B2_PHYD_MISC0
-+#define RG_SSUSB_FORCE_PLL_DDS_HF_EN_OFST (22)
-+#define RG_SSUSB_PLL_DDS_HF_EN_MAN_OFST (21)
-+#define RG_SSUSB_RXLFPS_ENTXDRV_OFST (20)
-+#define RG_SSUSB_RX_FL_UNLOCKTH_OFST (16)
-+#define RG_SSUSB_LFPS_PSEL_OFST (15)
-+#define RG_SSUSB_RX_SIGDET_EN_OFST (14)
-+#define RG_SSUSB_RX_SIGDET_EN_SEL_OFST (13)
-+#define RG_SSUSB_RX_PI_CAL_EN_OFST (12)
-+#define RG_SSUSB_RX_PI_CAL_EN_SEL_OFST (11)
-+#define RG_SSUSB_P3_CLS_CK_SEL_OFST (10)
-+#define RG_SSUSB_T2RLB_PSEL_OFST (8)
-+#define RG_SSUSB_PPCTL_PSEL_OFST (5)
-+#define RG_SSUSB_PHYD_TX_DATA_INV_OFST (4)
-+#define RG_SSUSB_BERTLB_PSEL_OFST (2)
-+#define RG_SSUSB_RETRACK_DIS_OFST (1)
-+#define RG_SSUSB_PPERRCNT_CLR_OFST (0)
-+
-+//U3D_B2_PHYD_MISC2
-+#define RG_SSUSB_FRC_PLL_DDS_PREDIV2_OFST (31)
-+#define RG_SSUSB_FRC_PLL_DDS_IADJ_OFST (27)
-+#define RG_SSUSB_P_SIGDET_125FILTER_OFST (26)
-+#define RG_SSUSB_P_SIGDET_RST_FILTER_OFST (25)
-+#define RG_SSUSB_P_SIGDET_EID_USE_RAW_OFST (24)
-+#define RG_SSUSB_P_SIGDET_LTD_USE_RAW_OFST (23)
-+#define RG_SSUSB_EIDLE_BF_RXDET_OFST (22)
-+#define RG_SSUSB_EIDLE_LP_STBCYC_OFST (13)
-+#define RG_SSUSB_TX_EIDLE_LP_POSTDLY_OFST (7)
-+#define RG_SSUSB_TX_EIDLE_LP_PREDLY_OFST (1)
-+#define RG_SSUSB_TX_EIDLE_LP_EN_ADV_OFST (0)
-+
-+//U3D_B2_PHYD_MISC3
-+#define RGS_SSUSB_DDS_CALIB_C_STATE_OFST (16)
-+#define RGS_SSUSB_PPERRCNT_OFST (0)
-+
-+//U3D_B2_ROSC_0
-+#define RG_SSUSB_RING_OSC_CNTEND_OFST (23)
-+#define RG_SSUSB_XTAL_OSC_CNTEND_OFST (16)
-+#define RG_SSUSB_RING_OSC_EN_OFST (3)
-+#define RG_SSUSB_RING_OSC_FORCE_EN_OFST (2)
-+#define RG_SSUSB_FRC_RING_BYPASS_DET_OFST (1)
-+#define RG_SSUSB_RING_BYPASS_DET_OFST (0)
-+
-+//U3D_B2_ROSC_1
-+#define RG_SSUSB_RING_OSC_FRC_P3_OFST (20)
-+#define RG_SSUSB_RING_OSC_P3_OFST (19)
-+#define RG_SSUSB_RING_OSC_FRC_RECAL_OFST (17)
-+#define RG_SSUSB_RING_OSC_RECAL_OFST (16)
-+#define RG_SSUSB_RING_OSC_SEL_OFST (8)
-+#define RG_SSUSB_RING_OSC_FRC_SEL_OFST (0)
-+
-+//U3D_B2_ROSC_2
-+#define RG_SSUSB_RING_DET_STRCYC2_OFST (16)
-+#define RG_SSUSB_RING_DET_STRCYC1_OFST (0)
-+
-+//U3D_B2_ROSC_3
-+#define RG_SSUSB_RING_DET_DETWIN1_OFST (16)
-+#define RG_SSUSB_RING_DET_STRCYC3_OFST (0)
-+
-+//U3D_B2_ROSC_4
-+#define RG_SSUSB_RING_DET_DETWIN3_OFST (16)
-+#define RG_SSUSB_RING_DET_DETWIN2_OFST (0)
-+
-+//U3D_B2_ROSC_5
-+#define RG_SSUSB_RING_DET_LBOND1_OFST (16)
-+#define RG_SSUSB_RING_DET_UBOND1_OFST (0)
-+
-+//U3D_B2_ROSC_6
-+#define RG_SSUSB_RING_DET_LBOND2_OFST (16)
-+#define RG_SSUSB_RING_DET_UBOND2_OFST (0)
-+
-+//U3D_B2_ROSC_7
-+#define RG_SSUSB_RING_DET_LBOND3_OFST (16)
-+#define RG_SSUSB_RING_DET_UBOND3_OFST (0)
-+
-+//U3D_B2_ROSC_8
-+#define RG_SSUSB_RING_RESERVE_OFST (16)
-+#define RG_SSUSB_ROSC_PROB_SEL_OFST (2)
-+#define RG_SSUSB_RING_FREQMETER_EN_OFST (1)
-+#define RG_SSUSB_RING_DET_BPS_UBOND_OFST (0)
-+
-+//U3D_B2_ROSC_9
-+#define RGS_FM_RING_CNT_OFST (16)
-+#define RGS_SSUSB_RING_OSC_STATE_OFST (10)
-+#define RGS_SSUSB_RING_OSC_STABLE_OFST (9)
-+#define RGS_SSUSB_RING_OSC_CAL_FAIL_OFST (8)
-+#define RGS_SSUSB_RING_OSC_CAL_OFST (0)
-+
-+//U3D_B2_ROSC_A
-+#define RGS_SSUSB_ROSC_PROB_OUT_OFST (0)
-+
-+//U3D_PHYD_VERSION
-+#define RGS_SSUSB_PHYD_VERSION_OFST (0)
-+
-+//U3D_PHYD_MODEL
-+#define RGS_SSUSB_PHYD_MODEL_OFST (0)
-+
-+
-+///////////////////////////////////////////////////////////////////////////////
-+
-+struct sifslv_chip_reg {
-+ PHY_LE32 xtalbias;
-+ PHY_LE32 syspll1;
-+ PHY_LE32 gpio_ctla;
-+ PHY_LE32 gpio_ctlb;
-+ PHY_LE32 gpio_ctlc;
-+};
-+
-+//U3D_GPIO_CTLA
-+#define RG_C60802_GPIO_CTLA (0xffffffff<<0) //31:0
-+
-+//U3D_GPIO_CTLB
-+#define RG_C60802_GPIO_CTLB (0xffffffff<<0) //31:0
-+
-+//U3D_GPIO_CTLC
-+#define RG_C60802_GPIO_CTLC (0xffffffff<<0) //31:0
-+
-+/* OFFSET */
-+
-+//U3D_GPIO_CTLA
-+#define RG_C60802_GPIO_CTLA_OFST (0)
-+
-+//U3D_GPIO_CTLB
-+#define RG_C60802_GPIO_CTLB_OFST (0)
-+
-+//U3D_GPIO_CTLC
-+#define RG_C60802_GPIO_CTLC_OFST (0)
-+
-+///////////////////////////////////////////////////////////////////////////////
-+
-+struct sifslv_fm_feg {
-+ //0x0
-+ PHY_LE32 fmcr0;
-+ PHY_LE32 fmcr1;
-+ PHY_LE32 fmcr2;
-+ PHY_LE32 fmmonr0;
-+ //0x10
-+ PHY_LE32 fmmonr1;
-+};
-+
-+//U3D_FMCR0
-+#define RG_LOCKTH (0xf<<28) //31:28
-+#define RG_MONCLK_SEL (0x3<<26) //27:26
-+#define RG_FM_MODE (0x1<<25) //25:25
-+#define RG_FREQDET_EN (0x1<<24) //24:24
-+#define RG_CYCLECNT (0xffffff<<0) //23:0
-+
-+//U3D_FMCR1
-+#define RG_TARGET (0xffffffff<<0) //31:0
-+
-+//U3D_FMCR2
-+#define RG_OFFSET (0xffffffff<<0) //31:0
-+
-+//U3D_FMMONR0
-+#define USB_FM_OUT (0xffffffff<<0) //31:0
-+
-+//U3D_FMMONR1
-+#define RG_MONCLK_SEL_3 (0x1<<9) //9:9
-+#define RG_FRCK_EN (0x1<<8) //8:8
-+#define USBPLL_LOCK (0x1<<1) //1:1
-+#define USB_FM_VLD (0x1<<0) //0:0
-+
-+
-+/* OFFSET */
-+
-+//U3D_FMCR0
-+#define RG_LOCKTH_OFST (28)
-+#define RG_MONCLK_SEL_OFST (26)
-+#define RG_FM_MODE_OFST (25)
-+#define RG_FREQDET_EN_OFST (24)
-+#define RG_CYCLECNT_OFST (0)
-+
-+//U3D_FMCR1
-+#define RG_TARGET_OFST (0)
-+
-+//U3D_FMCR2
-+#define RG_OFFSET_OFST (0)
-+
-+//U3D_FMMONR0
-+#define USB_FM_OUT_OFST (0)
-+
-+//U3D_FMMONR1
-+#define RG_MONCLK_SEL_3_OFST (9)
-+#define RG_FRCK_EN_OFST (8)
-+#define USBPLL_LOCK_OFST (1)
-+#define USB_FM_VLD_OFST (0)
-+
-+
-+///////////////////////////////////////////////////////////////////////////////
-+
-+PHY_INT32 phy_init(struct u3phy_info *info);
-+PHY_INT32 phy_change_pipe_phase(struct u3phy_info *info, PHY_INT32 phy_drv, PHY_INT32 pipe_phase);
-+PHY_INT32 eyescan_init(struct u3phy_info *info);
-+PHY_INT32 phy_eyescan(struct u3phy_info *info, PHY_INT32 x_t1, PHY_INT32 y_t1, PHY_INT32 x_br, PHY_INT32 y_br, PHY_INT32 delta_x, PHY_INT32 delta_y
-+ , PHY_INT32 eye_cnt, PHY_INT32 num_cnt, PHY_INT32 PI_cal_en, PHY_INT32 num_ignore_cnt);
-+PHY_INT32 u2_save_cur_en(struct u3phy_info *info);
-+PHY_INT32 u2_save_cur_re(struct u3phy_info *info);
-+PHY_INT32 u2_slew_rate_calibration(struct u3phy_info *info);
-+
-+#endif
-+#endif
---- /dev/null
-+++ b/drivers/usb/host/mtk-phy-ahb.c
-@@ -0,0 +1,58 @@
-+#include "mtk-phy.h"
-+#ifdef CONFIG_U3D_HAL_SUPPORT
-+#include "mu3d_hal_osal.h"
-+#endif
-+
-+#ifdef CONFIG_U3_PHY_AHB_SUPPORT
-+#include <linux/gfp.h>
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+
-+#ifndef CONFIG_U3D_HAL_SUPPORT
-+#define os_writel(addr,data) {\
-+ (*((volatile PHY_UINT32*)(addr)) = data);\
-+ }
-+#define os_readl(addr) *((volatile PHY_UINT32*)(addr))
-+#define os_writelmsk(addr, data, msk) \
-+ { os_writel(addr, ((os_readl(addr) & ~(msk)) | ((data) & (msk)))); \
-+ }
-+#define os_setmsk(addr, msk) \
-+ { os_writel(addr, os_readl(addr) | msk); \
-+ }
-+#define os_clrmsk(addr, msk) \
-+ { os_writel(addr, os_readl(addr) &~ msk); \
-+ }
-+/*msk the data first, then umsk with the umsk.*/
-+#define os_writelmskumsk(addr, data, msk, umsk) \
-+{\
-+ os_writel(addr, ((os_readl(addr) & ~(msk)) | ((data) & (msk))) & (umsk));\
-+}
-+
-+#endif
-+
-+PHY_INT32 U3PhyWriteReg32(PHY_UINT32 addr, PHY_UINT32 data)
-+{
-+ os_writel(addr, data);
-+
-+ return 0;
-+}
-+
-+PHY_INT32 U3PhyReadReg32(PHY_UINT32 addr)
-+{
-+ return os_readl(addr);
-+}
-+
-+PHY_INT32 U3PhyWriteReg8(PHY_UINT32 addr, PHY_UINT8 data)
-+{
-+ os_writelmsk(addr&0xfffffffc, data<<((addr%4)*8), 0xff<<((addr%4)*8));
-+
-+ return 0;
-+}
-+
-+PHY_INT8 U3PhyReadReg8(PHY_UINT32 addr)
-+{
-+ return ((os_readl(addr)>>((addr%4)*8))&0xff);
-+}
-+
-+#endif
-+
---- /dev/null
-+++ b/drivers/usb/host/mtk-phy.c
-@@ -0,0 +1,102 @@
-+#include <linux/gfp.h>
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#define U3_PHY_LIB
-+#include "mtk-phy.h"
-+#ifdef CONFIG_PROJECT_7621
-+#include "mtk-phy-7621.h"
-+#endif
-+#ifdef CONFIG_PROJECT_PHY
-+static struct u3phy_operator project_operators = {
-+ .init = phy_init,
-+ .change_pipe_phase = phy_change_pipe_phase,
-+ .eyescan_init = eyescan_init,
-+ .eyescan = phy_eyescan,
-+ .u2_slew_rate_calibration = u2_slew_rate_calibration,
-+};
-+#endif
-+
-+
-+PHY_INT32 u3phy_init(){
-+#ifndef CONFIG_PROJECT_PHY
-+ PHY_INT32 u3phy_version;
-+#endif
-+
-+ if(u3phy != NULL){
-+ return PHY_TRUE;
-+ }
-+
-+ u3phy = kmalloc(sizeof(struct u3phy_info), GFP_NOIO);
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ u3phy_p1 = kmalloc(sizeof(struct u3phy_info), GFP_NOIO);
-+#endif
-+#ifdef CONFIG_U3_PHY_GPIO_SUPPORT
-+ u3phy->phyd_version_addr = 0x2000e4;
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ u3phy_p1->phyd_version_addr = 0x2000e4;
-+#endif
-+#else
-+ u3phy->phyd_version_addr = U3_PHYD_B2_BASE + 0xe4;
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ u3phy_p1->phyd_version_addr = U3_PHYD_B2_BASE_P1 + 0xe4;
-+#endif
-+#endif
-+
-+#ifdef CONFIG_PROJECT_PHY
-+
-+ u3phy->u2phy_regs = (struct u2phy_reg *)U2_PHY_BASE;
-+ u3phy->u3phyd_regs = (struct u3phyd_reg *)U3_PHYD_BASE;
-+ u3phy->u3phyd_bank2_regs = (struct u3phyd_bank2_reg *)U3_PHYD_B2_BASE;
-+ u3phy->u3phya_regs = (struct u3phya_reg *)U3_PHYA_BASE;
-+ u3phy->u3phya_da_regs = (struct u3phya_da_reg *)U3_PHYA_DA_BASE;
-+ u3phy->sifslv_chip_regs = (struct sifslv_chip_reg *)SIFSLV_CHIP_BASE;
-+ u3phy->sifslv_fm_regs = (struct sifslv_fm_feg *)SIFSLV_FM_FEG_BASE;
-+ u3phy_ops = &project_operators;
-+
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ u3phy_p1->u2phy_regs = (struct u2phy_reg *)U2_PHY_BASE_P1;
-+ u3phy_p1->u3phyd_regs = (struct u3phyd_reg *)U3_PHYD_BASE_P1;
-+ u3phy_p1->u3phyd_bank2_regs = (struct u3phyd_bank2_reg *)U3_PHYD_B2_BASE_P1;
-+ u3phy_p1->u3phya_regs = (struct u3phya_reg *)U3_PHYA_BASE_P1;
-+ u3phy_p1->u3phya_da_regs = (struct u3phya_da_reg *)U3_PHYA_DA_BASE_P1;
-+ u3phy_p1->sifslv_chip_regs = (struct sifslv_chip_reg *)SIFSLV_CHIP_BASE;
-+ u3phy_p1->sifslv_fm_regs = (struct sifslv_fm_feg *)SIFSLV_FM_FEG_BASE;
-+#endif
-+#endif
-+
-+ return PHY_TRUE;
-+}
-+
-+PHY_INT32 U3PhyWriteField8(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value){
-+ PHY_INT8 cur_value;
-+ PHY_INT8 new_value;
-+
-+ cur_value = U3PhyReadReg8(addr);
-+ new_value = (cur_value & (~mask)) | (value << offset);
-+ //udelay(i2cdelayus);
-+ U3PhyWriteReg8(addr, new_value);
-+ return PHY_TRUE;
-+}
-+
-+PHY_INT32 U3PhyWriteField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value){
-+ PHY_INT32 cur_value;
-+ PHY_INT32 new_value;
-+
-+ cur_value = U3PhyReadReg32(addr);
-+ new_value = (cur_value & (~mask)) | ((value << offset) & mask);
-+ U3PhyWriteReg32(addr, new_value);
-+ //DRV_MDELAY(100);
-+
-+ return PHY_TRUE;
-+}
-+
-+PHY_INT32 U3PhyReadField8(PHY_INT32 addr,PHY_INT32 offset,PHY_INT32 mask){
-+
-+ return ((U3PhyReadReg8(addr) & mask) >> offset);
-+}
-+
-+PHY_INT32 U3PhyReadField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask){
-+
-+ return ((U3PhyReadReg32(addr) & mask) >> offset);
-+}
-+
---- /dev/null
-+++ b/drivers/usb/host/mtk-phy.h
-@@ -0,0 +1,179 @@
-+#ifndef __MTK_PHY_NEW_H
-+#define __MTK_PHY_NEW_H
-+
-+//#define CONFIG_U3D_HAL_SUPPORT
-+
-+/* include system library */
-+#include <linux/gfp.h>
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/delay.h>
-+
-+/* Choose PHY R/W implementation */
-+//#define CONFIG_U3_PHY_GPIO_SUPPORT //SW I2C implemented by GPIO
-+#define CONFIG_U3_PHY_AHB_SUPPORT //AHB, only on SoC
-+
-+/* Choose PHY version */
-+//Select your project by defining one of the followings
-+#define CONFIG_PROJECT_7621 //7621
-+#define CONFIG_PROJECT_PHY
-+
-+/* BASE ADDRESS DEFINE, should define this on ASIC */
-+#define PHY_BASE 0xBE1D0000
-+#define SIFSLV_FM_FEG_BASE (PHY_BASE+0x100)
-+#define SIFSLV_CHIP_BASE (PHY_BASE+0x700)
-+#define U2_PHY_BASE (PHY_BASE+0x800)
-+#define U3_PHYD_BASE (PHY_BASE+0x900)
-+#define U3_PHYD_B2_BASE (PHY_BASE+0xa00)
-+#define U3_PHYA_BASE (PHY_BASE+0xb00)
-+#define U3_PHYA_DA_BASE (PHY_BASE+0xc00)
-+
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+#define SIFSLV_FM_FEG_BASE_P1 (PHY_BASE+0x100)
-+#define SIFSLV_CHIP_BASE_P1 (PHY_BASE+0x700)
-+#define U2_PHY_BASE_P1 (PHY_BASE+0x1000)
-+#define U3_PHYD_BASE_P1 (PHY_BASE+0x1100)
-+#define U3_PHYD_B2_BASE_P1 (PHY_BASE+0x1200)
-+#define U3_PHYA_BASE_P1 (PHY_BASE+0x1300)
-+#define U3_PHYA_DA_BASE_P1 (PHY_BASE+0x1400)
-+#endif
-+
-+/*
-+
-+0x00000100 MODULE ssusb_sifslv_fmreg ssusb_sifslv_fmreg
-+0x00000700 MODULE ssusb_sifslv_ippc ssusb_sifslv_ippc
-+0x00000800 MODULE ssusb_sifslv_u2phy_com ssusb_sifslv_u2_phy_com_T28
-+0x00000900 MODULE ssusb_sifslv_u3phyd ssusb_sifslv_u3phyd_T28
-+0x00000a00 MODULE ssusb_sifslv_u3phyd_bank2 ssusb_sifslv_u3phyd_bank2_T28
-+0x00000b00 MODULE ssusb_sifslv_u3phya ssusb_sifslv_u3phya_T28
-+0x00000c00 MODULE ssusb_sifslv_u3phya_da ssusb_sifslv_u3phya_da_T28
-+*/
-+
-+
-+/* TYPE DEFINE */
-+typedef unsigned int PHY_UINT32;
-+typedef int PHY_INT32;
-+typedef unsigned short PHY_UINT16;
-+typedef short PHY_INT16;
-+typedef unsigned char PHY_UINT8;
-+typedef char PHY_INT8;
-+
-+typedef PHY_UINT32 __bitwise PHY_LE32;
-+
-+/* CONSTANT DEFINE */
-+#define PHY_FALSE 0
-+#define PHY_TRUE 1
-+
-+/* MACRO DEFINE */
-+#define DRV_WriteReg32(addr,data) ((*(volatile PHY_UINT32 *)(addr)) = (unsigned long)(data))
-+#define DRV_Reg32(addr) (*(volatile PHY_UINT32 *)(addr))
-+
-+#define DRV_MDELAY mdelay
-+#define DRV_MSLEEP msleep
-+#define DRV_UDELAY udelay
-+#define DRV_USLEEP usleep
-+
-+/* PHY FUNCTION DEFINE, implemented in platform files, ex. ahb, gpio */
-+PHY_INT32 U3PhyWriteReg32(PHY_UINT32 addr, PHY_UINT32 data);
-+PHY_INT32 U3PhyReadReg32(PHY_UINT32 addr);
-+PHY_INT32 U3PhyWriteReg8(PHY_UINT32 addr, PHY_UINT8 data);
-+PHY_INT8 U3PhyReadReg8(PHY_UINT32 addr);
-+
-+/* PHY GENERAL USAGE FUNC, implemented in mtk-phy.c */
-+PHY_INT32 U3PhyWriteField8(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value);
-+PHY_INT32 U3PhyWriteField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value);
-+PHY_INT32 U3PhyReadField8(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask);
-+PHY_INT32 U3PhyReadField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask);
-+
-+struct u3phy_info {
-+ PHY_INT32 phy_version;
-+ PHY_INT32 phyd_version_addr;
-+
-+#ifdef CONFIG_PROJECT_PHY
-+ struct u2phy_reg *u2phy_regs;
-+ struct u3phya_reg *u3phya_regs;
-+ struct u3phya_da_reg *u3phya_da_regs;
-+ struct u3phyd_reg *u3phyd_regs;
-+ struct u3phyd_bank2_reg *u3phyd_bank2_regs;
-+ struct sifslv_chip_reg *sifslv_chip_regs;
-+ struct sifslv_fm_feg *sifslv_fm_regs;
-+#endif
-+};
-+
-+struct u3phy_operator {
-+ PHY_INT32 (*init) (struct u3phy_info *info);
-+ PHY_INT32 (*change_pipe_phase) (struct u3phy_info *info, PHY_INT32 phy_drv, PHY_INT32 pipe_phase);
-+ PHY_INT32 (*eyescan_init) (struct u3phy_info *info);
-+ PHY_INT32 (*eyescan) (struct u3phy_info *info, PHY_INT32 x_t1, PHY_INT32 y_t1, PHY_INT32 x_br, PHY_INT32 y_br, PHY_INT32 delta_x, PHY_INT32 delta_y, PHY_INT32 eye_cnt, PHY_INT32 num_cnt, PHY_INT32 PI_cal_en, PHY_INT32 num_ignore_cnt);
-+ PHY_INT32 (*u2_save_current_entry) (struct u3phy_info *info);
-+ PHY_INT32 (*u2_save_current_recovery) (struct u3phy_info *info);
-+ PHY_INT32 (*u2_slew_rate_calibration) (struct u3phy_info *info);
-+};
-+
-+#ifdef U3_PHY_LIB
-+#define AUTOEXT
-+#else
-+#define AUTOEXT extern
-+#endif
-+
-+AUTOEXT struct u3phy_info *u3phy;
-+AUTOEXT struct u3phy_info *u3phy_p1;
-+AUTOEXT struct u3phy_operator *u3phy_ops;
-+
-+/*********eye scan required*********/
-+
-+#define LO_BYTE(x) ((PHY_UINT8)((x) & 0xFF))
-+#define HI_BYTE(x) ((PHY_UINT8)(((x) & 0xFF00) >> 8))
-+
-+typedef enum
-+{
-+ SCAN_UP,
-+ SCAN_DN
-+} enumScanDir;
-+
-+struct strucScanRegion
-+{
-+ PHY_INT8 bX_tl;
-+ PHY_INT8 bY_tl;
-+ PHY_INT8 bX_br;
-+ PHY_INT8 bY_br;
-+ PHY_INT8 bDeltaX;
-+ PHY_INT8 bDeltaY;
-+};
-+
-+struct strucTestCycle
-+{
-+ PHY_UINT16 wEyeCnt;
-+ PHY_INT8 bNumOfEyeCnt;
-+ PHY_INT8 bPICalEn;
-+ PHY_INT8 bNumOfIgnoreCnt;
-+};
-+
-+#define ERRCNT_MAX 128
-+#define CYCLE_COUNT_MAX 15
-+
-+/// the map resolution is 128 x 128 pts
-+#define MAX_X 127
-+#define MAX_Y 127
-+#define MIN_X 0
-+#define MIN_Y 0
-+
-+PHY_INT32 u3phy_init(void);
-+
-+AUTOEXT struct strucScanRegion _rEye1;
-+AUTOEXT struct strucScanRegion _rEye2;
-+AUTOEXT struct strucTestCycle _rTestCycle;
-+AUTOEXT PHY_UINT8 _bXcurr;
-+AUTOEXT PHY_UINT8 _bYcurr;
-+AUTOEXT enumScanDir _eScanDir;
-+AUTOEXT PHY_INT8 _fgXChged;
-+AUTOEXT PHY_INT8 _bPIResult;
-+/* use local variable instead to save memory use */
-+#if 0
-+AUTOEXT PHY_UINT32 pwErrCnt0[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX];
-+AUTOEXT PHY_UINT32 pwErrCnt1[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX];
-+#endif
-+
-+/***********************************/
-+#endif
-+
---- a/drivers/usb/host/pci-quirks.h
-+++ b/drivers/usb/host/pci-quirks.h
-@@ -1,7 +1,7 @@
- #ifndef __LINUX_USB_PCI_QUIRKS_H
- #define __LINUX_USB_PCI_QUIRKS_H
-
--#ifdef CONFIG_PCI
-+#if defined (CONFIG_PCI) && !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
- void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
- int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
- #endif /* CONFIG_PCI */
---- a/drivers/usb/host/xhci-dbg.c
-+++ b/drivers/usb/host/xhci-dbg.c
-@@ -21,6 +21,9 @@
- */
-
- #include "xhci.h"
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+#include "xhci-mtk.h"
-+#endif
-
- #define XHCI_INIT_VALUE 0x0
-
---- a/drivers/usb/host/xhci-mem.c
-+++ b/drivers/usb/host/xhci-mem.c
-@@ -67,6 +67,9 @@ static struct xhci_segment *xhci_segment_alloc(struct xhci_hcd *xhci,
-
- static void xhci_segment_free(struct xhci_hcd *xhci, struct xhci_segment *seg)
- {
-+ if (!seg)
-+ return;
-+
- if (seg->trbs) {
- dma_pool_free(xhci->segment_pool, seg->trbs, seg->dma);
- seg->trbs = NULL;
-@@ -1475,9 +1478,17 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
- max_burst = (usb_endpoint_maxp(&ep->desc)
- & 0x1800) >> 11;
- }
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ if ((max_packet % 4 == 2) && (max_packet % 16 != 14) && (max_burst == 0) && usb_endpoint_dir_in(&ep->desc))
-+ max_packet += 2;
-+#endif
- break;
- case USB_SPEED_FULL:
- case USB_SPEED_LOW:
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ if ((max_packet % 4 == 2) && (max_packet % 16 != 14) && (max_burst == 0) && usb_endpoint_dir_in(&ep->desc))
-+ max_packet += 2;
-+#endif
- break;
- default:
- BUG();
---- /dev/null
-+++ b/drivers/usb/host/xhci-mtk-power.c
-@@ -0,0 +1,115 @@
-+#include "xhci-mtk.h"
-+#include "xhci-mtk-power.h"
-+#include "xhci.h"
-+#include <linux/kernel.h> /* printk() */
-+#include <linux/slab.h>
-+#include <linux/delay.h>
-+
-+static int g_num_u3_port;
-+static int g_num_u2_port;
-+
-+
-+void enableXhciAllPortPower(struct xhci_hcd *xhci){
-+ int i;
-+ u32 port_id, temp;
-+ u32 __iomem *addr;
-+
-+ g_num_u3_port = SSUSB_U3_PORT_NUM(readl(SSUSB_IP_CAP));
-+ g_num_u2_port = SSUSB_U2_PORT_NUM(readl(SSUSB_IP_CAP));
-+
-+ for(i=1; i<=g_num_u3_port; i++){
-+ port_id=i;
-+ addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS*(port_id-1 & 0xff);
-+ temp = readl(addr);
-+ temp = xhci_port_state_to_neutral(temp);
-+ temp |= PORT_POWER;
-+ writel(temp, addr);
-+ }
-+ for(i=1; i<=g_num_u2_port; i++){
-+ port_id=i+g_num_u3_port;
-+ addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS*(port_id-1 & 0xff);
-+ temp = readl(addr);
-+ temp = xhci_port_state_to_neutral(temp);
-+ temp |= PORT_POWER;
-+ writel(temp, addr);
-+ }
-+}
-+
-+void enableAllClockPower(){
-+
-+ int i;
-+ u32 temp;
-+
-+ g_num_u3_port = SSUSB_U3_PORT_NUM(readl(SSUSB_IP_CAP));
-+ g_num_u2_port = SSUSB_U2_PORT_NUM(readl(SSUSB_IP_CAP));
-+
-+ //2. Enable xHC
-+ writel(readl(SSUSB_IP_PW_CTRL) | (SSUSB_IP_SW_RST), SSUSB_IP_PW_CTRL);
-+ writel(readl(SSUSB_IP_PW_CTRL) & (~SSUSB_IP_SW_RST), SSUSB_IP_PW_CTRL);
-+ writel(readl(SSUSB_IP_PW_CTRL_1) & (~SSUSB_IP_PDN), SSUSB_IP_PW_CTRL_1);
-+
-+ //1. Enable target ports
-+ for(i=0; i<g_num_u3_port; i++){
-+ temp = readl(SSUSB_U3_CTRL(i));
-+ temp = temp & (~SSUSB_U3_PORT_PDN) & (~SSUSB_U3_PORT_DIS);
-+ writel(temp, SSUSB_U3_CTRL(i));
-+ }
-+ for(i=0; i<g_num_u2_port; i++){
-+ temp = readl(SSUSB_U2_CTRL(i));
-+ temp = temp & (~SSUSB_U2_PORT_PDN) & (~SSUSB_U2_PORT_DIS);
-+ writel(temp, SSUSB_U2_CTRL(i));
-+ }
-+ msleep(100);
-+}
-+
-+
-+//(X)disable clock/power of a port
-+//(X)if all ports are disabled, disable IP ctrl power
-+//disable all ports and IP clock/power, this is just mention HW that the power/clock of port
-+//and IP could be disable if suspended.
-+//If doesn't not disable all ports at first, the IP clock/power will never be disabled
-+//(some U2 and U3 ports are binded to the same connection, that is, they will never enter suspend at the same time
-+//port_index: port number
-+//port_rev: 0x2 - USB2.0, 0x3 - USB3.0 (SuperSpeed)
-+void disablePortClockPower(void){
-+ int i;
-+ u32 temp;
-+
-+ g_num_u3_port = SSUSB_U3_PORT_NUM(readl(SSUSB_IP_CAP));
-+ g_num_u2_port = SSUSB_U2_PORT_NUM(readl(SSUSB_IP_CAP));
-+
-+ for(i=0; i<g_num_u3_port; i++){
-+ temp = readl(SSUSB_U3_CTRL(i));
-+ temp = temp | (SSUSB_U3_PORT_PDN);
-+ writel(temp, SSUSB_U3_CTRL(i));
-+ }
-+ for(i=0; i<g_num_u2_port; i++){
-+ temp = readl(SSUSB_U2_CTRL(i));
-+ temp = temp | (SSUSB_U2_PORT_PDN);
-+ writel(temp, SSUSB_U2_CTRL(i));
-+ }
-+ writel(readl(SSUSB_IP_PW_CTRL_1) | (SSUSB_IP_PDN), SSUSB_IP_PW_CTRL_1);
-+}
-+
-+//if IP ctrl power is disabled, enable it
-+//enable clock/power of a port
-+//port_index: port number
-+//port_rev: 0x2 - USB2.0, 0x3 - USB3.0 (SuperSpeed)
-+void enablePortClockPower(int port_index, int port_rev){
-+ int i;
-+ u32 temp;
-+
-+ writel(readl(SSUSB_IP_PW_CTRL_1) & (~SSUSB_IP_PDN), SSUSB_IP_PW_CTRL_1);
-+
-+ if(port_rev == 0x3){
-+ temp = readl(SSUSB_U3_CTRL(port_index));
-+ temp = temp & (~SSUSB_U3_PORT_PDN);
-+ writel(temp, SSUSB_U3_CTRL(port_index));
-+ }
-+ else if(port_rev == 0x2){
-+ temp = readl(SSUSB_U2_CTRL(port_index));
-+ temp = temp & (~SSUSB_U2_PORT_PDN);
-+ writel(temp, SSUSB_U2_CTRL(port_index));
-+ }
-+}
-+
---- /dev/null
-+++ b/drivers/usb/host/xhci-mtk-power.h
-@@ -0,0 +1,13 @@
-+#ifndef _XHCI_MTK_POWER_H
-+#define _XHCI_MTK_POWER_H
-+
-+#include <linux/usb.h>
-+#include "xhci.h"
-+#include "xhci-mtk.h"
-+
-+void enableXhciAllPortPower(struct xhci_hcd *xhci);
-+void enableAllClockPower(void);
-+void disablePortClockPower(void);
-+void enablePortClockPower(int port_index, int port_rev);
-+
-+#endif
---- /dev/null
-+++ b/drivers/usb/host/xhci-mtk-scheduler.c
-@@ -0,0 +1,608 @@
-+#include "xhci-mtk-scheduler.h"
-+#include <linux/kernel.h> /* printk() */
-+
-+static struct sch_ep **ss_out_eps[MAX_EP_NUM];
-+static struct sch_ep **ss_in_eps[MAX_EP_NUM];
-+static struct sch_ep **hs_eps[MAX_EP_NUM]; //including tt isoc
-+static struct sch_ep **tt_intr_eps[MAX_EP_NUM];
-+
-+
-+int mtk_xhci_scheduler_init(void){
-+ int i;
-+
-+ for(i=0; i<MAX_EP_NUM; i++){
-+ ss_out_eps[i] = NULL;
-+ }
-+ for(i=0; i<MAX_EP_NUM; i++){
-+ ss_in_eps[i] = NULL;
-+ }
-+ for(i=0; i<MAX_EP_NUM; i++){
-+ hs_eps[i] = NULL;
-+ }
-+ for(i=0; i<MAX_EP_NUM; i++){
-+ tt_intr_eps[i] = NULL;
-+ }
-+ return 0;
-+}
-+
-+int add_sch_ep(int dev_speed, int is_in, int isTT, int ep_type, int maxp, int interval, int burst
-+ , int mult, int offset, int repeat, int pkts, int cs_count, int burst_mode
-+ , int bw_cost, mtk_u32 *ep, struct sch_ep *tmp_ep){
-+
-+ struct sch_ep **ep_array;
-+ int i;
-+
-+ if(is_in && dev_speed == USB_SPEED_SUPER ){
-+ ep_array = (struct sch_ep **)ss_in_eps;
-+ }
-+ else if(dev_speed == USB_SPEED_SUPER){
-+ ep_array = (struct sch_ep **)ss_out_eps;
-+ }
-+ else if(dev_speed == USB_SPEED_HIGH || (isTT && ep_type == USB_EP_ISOC)){
-+ ep_array = (struct sch_ep **)hs_eps;
-+ }
-+ else{
-+ ep_array = (struct sch_ep **)tt_intr_eps;
-+ }
-+ for(i=0; i<MAX_EP_NUM; i++){
-+ if(ep_array[i] == NULL){
-+ tmp_ep->dev_speed = dev_speed;
-+ tmp_ep->isTT = isTT;
-+ tmp_ep->is_in = is_in;
-+ tmp_ep->ep_type = ep_type;
-+ tmp_ep->maxp = maxp;
-+ tmp_ep->interval = interval;
-+ tmp_ep->burst = burst;
-+ tmp_ep->mult = mult;
-+ tmp_ep->offset = offset;
-+ tmp_ep->repeat = repeat;
-+ tmp_ep->pkts = pkts;
-+ tmp_ep->cs_count = cs_count;
-+ tmp_ep->burst_mode = burst_mode;
-+ tmp_ep->bw_cost = bw_cost;
-+ tmp_ep->ep = ep;
-+ ep_array[i] = tmp_ep;
-+ return SCH_SUCCESS;
-+ }
-+ }
-+ return SCH_FAIL;
-+}
-+
-+int count_ss_bw(int is_in, int ep_type, int maxp, int interval, int burst, int mult, int offset, int repeat
-+ , int td_size){
-+ int i, j, k;
-+ int bw_required[3];
-+ int final_bw_required;
-+ int bw_required_per_repeat;
-+ int tmp_bw_required;
-+ struct sch_ep *cur_sch_ep;
-+ struct sch_ep **ep_array;
-+ int cur_offset;
-+ int cur_ep_offset;
-+ int tmp_offset;
-+ int tmp_interval;
-+ int ep_offset;
-+ int ep_interval;
-+ int ep_repeat;
-+ int ep_mult;
-+
-+ if(is_in){
-+ ep_array = (struct sch_ep **)ss_in_eps;
-+ }
-+ else{
-+ ep_array = (struct sch_ep **)ss_out_eps;
-+ }
-+
-+ bw_required[0] = 0;
-+ bw_required[1] = 0;
-+ bw_required[2] = 0;
-+
-+ if(repeat == 0){
-+ final_bw_required = 0;
-+ for(i=0; i<MAX_EP_NUM; i++){
-+ cur_sch_ep = ep_array[i];
-+ if(cur_sch_ep == NULL){
-+ continue;
-+ }
-+ ep_interval = cur_sch_ep->interval;
-+ ep_offset = cur_sch_ep->offset;
-+ if(cur_sch_ep->repeat == 0){
-+ if(ep_interval >= interval){
-+ tmp_offset = ep_offset + ep_interval - offset;
-+ tmp_interval = interval;
-+ }
-+ else{
-+ tmp_offset = offset + interval - ep_offset;
-+ tmp_interval = ep_interval;
-+ }
-+ if(tmp_offset % tmp_interval == 0){
-+ final_bw_required += cur_sch_ep->bw_cost;
-+ }
-+ }
-+ else{
-+ ep_repeat = cur_sch_ep->repeat;
-+ ep_mult = cur_sch_ep->mult;
-+ for(k=0; k<=ep_mult; k++){
-+ cur_ep_offset = ep_offset+(k*ep_mult);
-+ if(ep_interval >= interval){
-+ tmp_offset = cur_ep_offset + ep_interval - offset;
-+ tmp_interval = interval;
-+ }
-+ else{
-+ tmp_offset = offset + interval - cur_ep_offset;
-+ tmp_interval = ep_interval;
-+ }
-+ if(tmp_offset % tmp_interval == 0){
-+ final_bw_required += cur_sch_ep->bw_cost;
-+ break;
-+ }
-+ }
-+ }
-+ }
-+ final_bw_required += td_size;
-+ }
-+ else{
-+ bw_required_per_repeat = maxp * (burst+1);
-+ for(j=0; j<=mult; j++){
-+ tmp_bw_required = 0;
-+ cur_offset = offset+(j*repeat);
-+ for(i=0; i<MAX_EP_NUM; i++){
-+ cur_sch_ep = ep_array[i];
-+ if(cur_sch_ep == NULL){
-+ continue;
-+ }
-+ ep_interval = cur_sch_ep->interval;
-+ ep_offset = cur_sch_ep->offset;
-+ if(cur_sch_ep->repeat == 0){
-+ if(ep_interval >= interval){
-+ tmp_offset = ep_offset + ep_interval - cur_offset;
-+ tmp_interval = interval;
-+ }
-+ else{
-+ tmp_offset = cur_offset + interval - ep_offset;
-+ tmp_interval = ep_interval;
-+ }
-+ if(tmp_offset % tmp_interval == 0){
-+ tmp_bw_required += cur_sch_ep->bw_cost;
-+ }
-+ }
-+ else{
-+ ep_repeat = cur_sch_ep->repeat;
-+ ep_mult = cur_sch_ep->mult;
-+ for(k=0; k<=ep_mult; k++){
-+ cur_ep_offset = ep_offset+(k*ep_repeat);
-+ if(ep_interval >= interval){
-+ tmp_offset = cur_ep_offset + ep_interval - cur_offset;
-+ tmp_interval = interval;
-+ }
-+ else{
-+ tmp_offset = cur_offset + interval - cur_ep_offset;
-+ tmp_interval = ep_interval;
-+ }
-+ if(tmp_offset % tmp_interval == 0){
-+ tmp_bw_required += cur_sch_ep->bw_cost;
-+ break;
-+ }
-+ }
-+ }
-+ }
-+ bw_required[j] = tmp_bw_required;
-+ }
-+ final_bw_required = SS_BW_BOUND;
-+ for(j=0; j<=mult; j++){
-+ if(bw_required[j] < final_bw_required){
-+ final_bw_required = bw_required[j];
-+ }
-+ }
-+ final_bw_required += bw_required_per_repeat;
-+ }
-+ return final_bw_required;
-+}
-+
-+int count_hs_bw(int ep_type, int maxp, int interval, int offset, int td_size){
-+ int i;
-+ int bw_required;
-+ struct sch_ep *cur_sch_ep;
-+ int tmp_offset;
-+ int tmp_interval;
-+ int ep_offset;
-+ int ep_interval;
-+ int cur_tt_isoc_interval; //for isoc tt check
-+
-+ bw_required = 0;
-+ for(i=0; i<MAX_EP_NUM; i++){
-+
-+ cur_sch_ep = (struct sch_ep *)hs_eps[i];
-+ if(cur_sch_ep == NULL){
-+ continue;
-+ }
-+ ep_offset = cur_sch_ep->offset;
-+ ep_interval = cur_sch_ep->interval;
-+
-+ if(cur_sch_ep->isTT && cur_sch_ep->ep_type == USB_EP_ISOC){
-+ cur_tt_isoc_interval = ep_interval<<3;
-+ if(ep_interval >= interval){
-+ tmp_offset = ep_offset + cur_tt_isoc_interval - offset;
-+ tmp_interval = interval;
-+ }
-+ else{
-+ tmp_offset = offset + interval - ep_offset;
-+ tmp_interval = cur_tt_isoc_interval;
-+ }
-+ if(cur_sch_ep->is_in){
-+ if((tmp_offset%tmp_interval >=2) && (tmp_offset%tmp_interval <= cur_sch_ep->cs_count)){
-+ bw_required += 188;
-+ }
-+ }
-+ else{
-+ if(tmp_offset%tmp_interval <= cur_sch_ep->cs_count){
-+ bw_required += 188;
-+ }
-+ }
-+ }
-+ else{
-+ if(ep_interval >= interval){
-+ tmp_offset = ep_offset + ep_interval - offset;
-+ tmp_interval = interval;
-+ }
-+ else{
-+ tmp_offset = offset + interval - ep_offset;
-+ tmp_interval = ep_interval;
-+ }
-+ if(tmp_offset%tmp_interval == 0){
-+ bw_required += cur_sch_ep->bw_cost;
-+ }
-+ }
-+ }
-+ bw_required += td_size;
-+ return bw_required;
-+}
-+
-+int count_tt_isoc_bw(int is_in, int maxp, int interval, int offset, int td_size){
-+ char is_cs;
-+ int mframe_idx, frame_idx, s_frame, s_mframe, cur_mframe;
-+ int bw_required, max_bw;
-+ int ss_cs_count;
-+ int cs_mframe;
-+ int max_frame;
-+ int i,j;
-+ struct sch_ep *cur_sch_ep;
-+ int ep_offset;
-+ int ep_interval;
-+ int ep_cs_count;
-+ int tt_isoc_interval; //for isoc tt check
-+ int cur_tt_isoc_interval; //for isoc tt check
-+ int tmp_offset;
-+ int tmp_interval;
-+
-+ is_cs = 0;
-+
-+ tt_isoc_interval = interval<<3; //frame to mframe
-+ if(is_in){
-+ is_cs = 1;
-+ }
-+ s_frame = offset/8;
-+ s_mframe = offset%8;
-+ ss_cs_count = (maxp + (188 - 1))/188;
-+ if(is_cs){
-+ cs_mframe = offset%8 + 2 + ss_cs_count;
-+ if (cs_mframe <= 6)
-+ ss_cs_count += 2;
-+ else if (cs_mframe == 7)
-+ ss_cs_count++;
-+ else if (cs_mframe > 8)
-+ return -1;
-+ }
-+ max_bw = 0;
-+ if(is_in){
-+ i=2;
-+ }
-+ for(cur_mframe = offset+i; i<ss_cs_count; cur_mframe++, i++){
-+ bw_required = 0;
-+ for(j=0; j<MAX_EP_NUM; j++){
-+ cur_sch_ep = (struct sch_ep *)hs_eps[j];
-+ if(cur_sch_ep == NULL){
-+ continue;
-+ }
-+ ep_offset = cur_sch_ep->offset;
-+ ep_interval = cur_sch_ep->interval;
-+ if(cur_sch_ep->isTT && cur_sch_ep->ep_type == USB_EP_ISOC){
-+ //isoc tt
-+ //check if mframe offset overlap
-+ //if overlap, add 188 to the bw
-+ cur_tt_isoc_interval = ep_interval<<3;
-+ if(cur_tt_isoc_interval >= tt_isoc_interval){
-+ tmp_offset = (ep_offset+cur_tt_isoc_interval) - cur_mframe;
-+ tmp_interval = tt_isoc_interval;
-+ }
-+ else{
-+ tmp_offset = (cur_mframe+tt_isoc_interval) - ep_offset;
-+ tmp_interval = cur_tt_isoc_interval;
-+ }
-+ if(cur_sch_ep->is_in){
-+ if((tmp_offset%tmp_interval >=2) && (tmp_offset%tmp_interval <= cur_sch_ep->cs_count)){
-+ bw_required += 188;
-+ }
-+ }
-+ else{
-+ if(tmp_offset%tmp_interval <= cur_sch_ep->cs_count){
-+ bw_required += 188;
-+ }
-+ }
-+
-+ }
-+ else if(cur_sch_ep->ep_type == USB_EP_INT || cur_sch_ep->ep_type == USB_EP_ISOC){
-+ //check if mframe
-+ if(ep_interval >= tt_isoc_interval){
-+ tmp_offset = (ep_offset+ep_interval) - cur_mframe;
-+ tmp_interval = tt_isoc_interval;
-+ }
-+ else{
-+ tmp_offset = (cur_mframe+tt_isoc_interval) - ep_offset;
-+ tmp_interval = ep_interval;
-+ }
-+ if(tmp_offset%tmp_interval == 0){
-+ bw_required += cur_sch_ep->bw_cost;
-+ }
-+ }
-+ }
-+ bw_required += 188;
-+ if(bw_required > max_bw){
-+ max_bw = bw_required;
-+ }
-+ }
-+ return max_bw;
-+}
-+
-+int count_tt_intr_bw(int interval, int frame_offset){
-+ //check all eps in tt_intr_eps
-+ int ret;
-+ int i,j;
-+ int ep_offset;
-+ int ep_interval;
-+ int tmp_offset;
-+ int tmp_interval;
-+ ret = SCH_SUCCESS;
-+ struct sch_ep *cur_sch_ep;
-+
-+ for(i=0; i<MAX_EP_NUM; i++){
-+ cur_sch_ep = (struct sch_ep *)tt_intr_eps[i];
-+ if(cur_sch_ep == NULL){
-+ continue;
-+ }
-+ ep_offset = cur_sch_ep->offset;
-+ ep_interval = cur_sch_ep->interval;
-+ if(ep_interval >= interval){
-+ tmp_offset = ep_offset + ep_interval - frame_offset;
-+ tmp_interval = interval;
-+ }
-+ else{
-+ tmp_offset = frame_offset + interval - ep_offset;
-+ tmp_interval = ep_interval;
-+ }
-+
-+ if(tmp_offset%tmp_interval==0){
-+ return SCH_FAIL;
-+ }
-+ }
-+ return SCH_SUCCESS;
-+}
-+
-+struct sch_ep * mtk_xhci_scheduler_remove_ep(int dev_speed, int is_in, int isTT, int ep_type, mtk_u32 *ep){
-+ int i;
-+ struct sch_ep **ep_array;
-+ struct sch_ep *cur_ep;
-+
-+ if (is_in && dev_speed == USB_SPEED_SUPER) {
-+ ep_array = (struct sch_ep **)ss_in_eps;
-+ }
-+ else if (dev_speed == USB_SPEED_SUPER) {
-+ ep_array = (struct sch_ep **)ss_out_eps;
-+ }
-+ else if (dev_speed == USB_SPEED_HIGH || (isTT && ep_type == USB_EP_ISOC)) {
-+ ep_array = (struct sch_ep **)hs_eps;
-+ }
-+ else {
-+ ep_array = (struct sch_ep **)tt_intr_eps;
-+ }
-+ for (i = 0; i < MAX_EP_NUM; i++) {
-+ cur_ep = (struct sch_ep *)ep_array[i];
-+ if(cur_ep != NULL && cur_ep->ep == ep){
-+ ep_array[i] = NULL;
-+ return cur_ep;
-+ }
-+ }
-+ return NULL;
-+}
-+
-+int mtk_xhci_scheduler_add_ep(int dev_speed, int is_in, int isTT, int ep_type, int maxp, int interval, int burst
-+ , int mult, mtk_u32 *ep, mtk_u32 *ep_ctx, struct sch_ep *sch_ep){
-+ mtk_u32 bPkts = 0;
-+ mtk_u32 bCsCount = 0;
-+ mtk_u32 bBm = 1;
-+ mtk_u32 bOffset = 0;
-+ mtk_u32 bRepeat = 0;
-+ int ret;
-+ struct mtk_xhci_ep_ctx *temp_ep_ctx;
-+ int td_size;
-+ int mframe_idx, frame_idx;
-+ int bw_cost;
-+ int cur_bw, best_bw, best_bw_idx,repeat, max_repeat, best_bw_repeat;
-+ int cur_offset, cs_mframe;
-+ int break_out;
-+ int frame_interval;
-+
-+ printk(KERN_ERR "add_ep parameters, dev_speed %d, is_in %d, isTT %d, ep_type %d, maxp %d, interval %d, burst %d, mult %d, ep 0x%x, ep_ctx 0x%x, sch_ep 0x%x\n", dev_speed, is_in, isTT, ep_type, maxp
-+ , interval, burst, mult, ep, ep_ctx, sch_ep);
-+ if(isTT && ep_type == USB_EP_INT && ((dev_speed == USB_SPEED_LOW) || (dev_speed == USB_SPEED_FULL))){
-+ frame_interval = interval >> 3;
-+ for(frame_idx=0; frame_idx<frame_interval; frame_idx++){
-+ printk(KERN_ERR "check tt_intr_bw interval %d, frame_idx %d\n", frame_interval, frame_idx);
-+ if(count_tt_intr_bw(frame_interval, frame_idx) == SCH_SUCCESS){
-+ printk(KERN_ERR "check OK............\n");
-+ bOffset = frame_idx<<3;
-+ bPkts = 1;
-+ bCsCount = 3;
-+ bw_cost = maxp;
-+ bRepeat = 0;
-+ if(add_sch_ep(dev_speed, is_in, isTT, ep_type, maxp, frame_interval, burst, mult
-+ , bOffset, bRepeat, bPkts, bCsCount, bBm, maxp, ep, sch_ep) == SCH_FAIL){
-+ return SCH_FAIL;
-+ }
-+ ret = SCH_SUCCESS;
-+ break;
-+ }
-+ }
-+ }
-+ else if(isTT && ep_type == USB_EP_ISOC){
-+ best_bw = HS_BW_BOUND;
-+ best_bw_idx = -1;
-+ cur_bw = 0;
-+ td_size = maxp;
-+ break_out = 0;
-+ frame_interval = interval>>3;
-+ for(frame_idx=0; frame_idx<frame_interval && !break_out; frame_idx++){
-+ for(mframe_idx=0; mframe_idx<8; mframe_idx++){
-+ cur_offset = (frame_idx*8) + mframe_idx;
-+ cur_bw = count_tt_isoc_bw(is_in, maxp, frame_interval, cur_offset, td_size);
-+ if(cur_bw > 0 && cur_bw < best_bw){
-+ best_bw_idx = cur_offset;
-+ best_bw = cur_bw;
-+ if(cur_bw == td_size || cur_bw < (HS_BW_BOUND>>1)){
-+ break_out = 1;
-+ break;
-+ }
-+ }
-+ }
-+ }
-+ if(best_bw_idx == -1){
-+ return SCH_FAIL;
-+ }
-+ else{
-+ bOffset = best_bw_idx;
-+ bPkts = 1;
-+ bCsCount = (maxp + (188 - 1)) / 188;
-+ if(is_in){
-+ cs_mframe = bOffset%8 + 2 + bCsCount;
-+ if (cs_mframe <= 6)
-+ bCsCount += 2;
-+ else if (cs_mframe == 7)
-+ bCsCount++;
-+ }
-+ bw_cost = 188;
-+ bRepeat = 0;
-+ if(add_sch_ep( dev_speed, is_in, isTT, ep_type, maxp, interval, burst, mult
-+ , bOffset, bRepeat, bPkts, bCsCount, bBm, bw_cost, ep, sch_ep) == SCH_FAIL){
-+ return SCH_FAIL;
-+ }
-+ ret = SCH_SUCCESS;
-+ }
-+ }
-+ else if((dev_speed == USB_SPEED_FULL || dev_speed == USB_SPEED_LOW) && ep_type == USB_EP_INT){
-+ bPkts = 1;
-+ ret = SCH_SUCCESS;
-+ }
-+ else if(dev_speed == USB_SPEED_FULL && ep_type == USB_EP_ISOC){
-+ bPkts = 1;
-+ ret = SCH_SUCCESS;
-+ }
-+ else if(dev_speed == USB_SPEED_HIGH && (ep_type == USB_EP_INT || ep_type == USB_EP_ISOC)){
-+ best_bw = HS_BW_BOUND;
-+ best_bw_idx = -1;
-+ cur_bw = 0;
-+ td_size = maxp*(burst+1);
-+ for(cur_offset = 0; cur_offset<interval; cur_offset++){
-+ cur_bw = count_hs_bw(ep_type, maxp, interval, cur_offset, td_size);
-+ if(cur_bw > 0 && cur_bw < best_bw){
-+ best_bw_idx = cur_offset;
-+ best_bw = cur_bw;
-+ if(cur_bw == td_size || cur_bw < (HS_BW_BOUND>>1)){
-+ break;
-+ }
-+ }
-+ }
-+ if(best_bw_idx == -1){
-+ return SCH_FAIL;
-+ }
-+ else{
-+ bOffset = best_bw_idx;
-+ bPkts = burst + 1;
-+ bCsCount = 0;
-+ bw_cost = td_size;
-+ bRepeat = 0;
-+ if(add_sch_ep(dev_speed, is_in, isTT, ep_type, maxp, interval, burst, mult
-+ , bOffset, bRepeat, bPkts, bCsCount, bBm, bw_cost, ep, sch_ep) == SCH_FAIL){
-+ return SCH_FAIL;
-+ }
-+ ret = SCH_SUCCESS;
-+ }
-+ }
-+ else if(dev_speed == USB_SPEED_SUPER && (ep_type == USB_EP_INT || ep_type == USB_EP_ISOC)){
-+ best_bw = SS_BW_BOUND;
-+ best_bw_idx = -1;
-+ cur_bw = 0;
-+ td_size = maxp * (mult+1) * (burst+1);
-+ if(mult == 0){
-+ max_repeat = 0;
-+ }
-+ else{
-+ max_repeat = (interval-1)/(mult+1);
-+ }
-+ break_out = 0;
-+ for(frame_idx = 0; (frame_idx < interval) && !break_out; frame_idx++){
-+ for(repeat = max_repeat; repeat >= 0; repeat--){
-+ cur_bw = count_ss_bw(is_in, ep_type, maxp, interval, burst, mult, frame_idx
-+ , repeat, td_size);
-+ printk(KERN_ERR "count_ss_bw, frame_idx %d, repeat %d, td_size %d, result bw %d\n"
-+ , frame_idx, repeat, td_size, cur_bw);
-+ if(cur_bw > 0 && cur_bw < best_bw){
-+ best_bw_idx = frame_idx;
-+ best_bw_repeat = repeat;
-+ best_bw = cur_bw;
-+ if(cur_bw <= td_size || cur_bw < (HS_BW_BOUND>>1)){
-+ break_out = 1;
-+ break;
-+ }
-+ }
-+ }
-+ }
-+ printk(KERN_ERR "final best idx %d, best repeat %d\n", best_bw_idx, best_bw_repeat);
-+ if(best_bw_idx == -1){
-+ return SCH_FAIL;
-+ }
-+ else{
-+ bOffset = best_bw_idx;
-+ bCsCount = 0;
-+ bRepeat = best_bw_repeat;
-+ if(bRepeat == 0){
-+ bw_cost = (burst+1)*(mult+1)*maxp;
-+ bPkts = (burst+1)*(mult+1);
-+ }
-+ else{
-+ bw_cost = (burst+1)*maxp;
-+ bPkts = (burst+1);
-+ }
-+ if(add_sch_ep(dev_speed, is_in, isTT, ep_type, maxp, interval, burst, mult
-+ , bOffset, bRepeat, bPkts, bCsCount, bBm, bw_cost, ep, sch_ep) == SCH_FAIL){
-+ return SCH_FAIL;
-+ }
-+ ret = SCH_SUCCESS;
-+ }
-+ }
-+ else{
-+ bPkts = 1;
-+ ret = SCH_SUCCESS;
-+ }
-+ if(ret == SCH_SUCCESS){
-+ temp_ep_ctx = (struct mtk_xhci_ep_ctx *)ep_ctx;
-+ temp_ep_ctx->reserved[0] |= (BPKTS(bPkts) | BCSCOUNT(bCsCount) | BBM(bBm));
-+ temp_ep_ctx->reserved[1] |= (BOFFSET(bOffset) | BREPEAT(bRepeat));
-+
-+ printk(KERN_DEBUG "[DBG] BPKTS: %x, BCSCOUNT: %x, BBM: %x\n", bPkts, bCsCount, bBm);
-+ printk(KERN_DEBUG "[DBG] BOFFSET: %x, BREPEAT: %x\n", bOffset, bRepeat);
-+ return SCH_SUCCESS;
-+ }
-+ else{
-+ return SCH_FAIL;
-+ }
-+}
---- /dev/null
-+++ b/drivers/usb/host/xhci-mtk-scheduler.h
-@@ -0,0 +1,77 @@
-+#ifndef _XHCI_MTK_SCHEDULER_H
-+#define _XHCI_MTK_SCHEDULER_H
-+
-+#define MTK_SCH_NEW 1
-+
-+#define SCH_SUCCESS 1
-+#define SCH_FAIL 0
-+
-+#define MAX_EP_NUM 64
-+#define SS_BW_BOUND 51000
-+#define HS_BW_BOUND 6144
-+
-+#define USB_EP_CONTROL 0
-+#define USB_EP_ISOC 1
-+#define USB_EP_BULK 2
-+#define USB_EP_INT 3
-+
-+#define USB_SPEED_LOW 1
-+#define USB_SPEED_FULL 2
-+#define USB_SPEED_HIGH 3
-+#define USB_SPEED_SUPER 5
-+
-+/* mtk scheduler bitmasks */
-+#define BPKTS(p) ((p) & 0x3f)
-+#define BCSCOUNT(p) (((p) & 0x7) << 8)
-+#define BBM(p) ((p) << 11)
-+#define BOFFSET(p) ((p) & 0x3fff)
-+#define BREPEAT(p) (((p) & 0x7fff) << 16)
-+
-+
-+#if 1
-+typedef unsigned int mtk_u32;
-+typedef unsigned long long mtk_u64;
-+#endif
-+
-+#define NULL ((void *)0)
-+
-+struct mtk_xhci_ep_ctx {
-+ mtk_u32 ep_info;
-+ mtk_u32 ep_info2;
-+ mtk_u64 deq;
-+ mtk_u32 tx_info;
-+ /* offset 0x14 - 0x1f reserved for HC internal use */
-+ mtk_u32 reserved[3];
-+};
-+
-+
-+struct sch_ep
-+{
-+ //device info
-+ int dev_speed;
-+ int isTT;
-+ //ep info
-+ int is_in;
-+ int ep_type;
-+ int maxp;
-+ int interval;
-+ int burst;
-+ int mult;
-+ //scheduling info
-+ int offset;
-+ int repeat;
-+ int pkts;
-+ int cs_count;
-+ int burst_mode;
-+ //other
-+ int bw_cost; //bandwidth cost in each repeat; including overhead
-+ mtk_u32 *ep; //address of usb_endpoint pointer
-+};
-+
-+int mtk_xhci_scheduler_init(void);
-+int mtk_xhci_scheduler_add_ep(int dev_speed, int is_in, int isTT, int ep_type, int maxp, int interval, int burst
-+ , int mult, mtk_u32 *ep, mtk_u32 *ep_ctx, struct sch_ep *sch_ep);
-+struct sch_ep * mtk_xhci_scheduler_remove_ep(int dev_speed, int is_in, int isTT, int ep_type, mtk_u32 *ep);
-+
-+
-+#endif
---- /dev/null
-+++ b/drivers/usb/host/xhci-mtk.c
-@@ -0,0 +1,265 @@
-+#include "xhci-mtk.h"
-+#include "xhci-mtk-power.h"
-+#include "xhci.h"
-+#include "mtk-phy.h"
-+#ifdef CONFIG_C60802_SUPPORT
-+#include "mtk-phy-c60802.h"
-+#endif
-+#include "xhci-mtk-scheduler.h"
-+#include <linux/kernel.h> /* printk() */
-+#include <linux/slab.h>
-+#include <linux/delay.h>
-+#include <asm/uaccess.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/platform_device.h>
-+
-+void setInitialReg(void )
-+{
-+ __u32 __iomem *addr;
-+ u32 temp;
-+
-+ /* set SSUSB DMA burst size to 128B */
-+ addr = SSUSB_U3_XHCI_BASE + SSUSB_HDMA_CFG;
-+ temp = SSUSB_HDMA_CFG_MT7621_VALUE;
-+ writel(temp, addr);
-+
-+ /* extend U3 LTSSM Polling.LFPS timeout value */
-+ addr = SSUSB_U3_XHCI_BASE + U3_LTSSM_TIMING_PARAMETER3;
-+ temp = U3_LTSSM_TIMING_PARAMETER3_VALUE;
-+ writel(temp, addr);
-+
-+ /* EOF */
-+ addr = SSUSB_U3_XHCI_BASE + SYNC_HS_EOF;
-+ temp = SYNC_HS_EOF_VALUE;
-+ writel(temp, addr);
-+
-+#if defined (CONFIG_PERIODIC_ENP)
-+ /* HSCH_CFG1: SCH2_FIFO_DEPTH */
-+ addr = SSUSB_U3_XHCI_BASE + HSCH_CFG1;
-+ temp = readl(addr);
-+ temp &= ~(0x3 << SCH2_FIFO_DEPTH_OFFSET);
-+ writel(temp, addr);
-+#endif
-+
-+ /* Doorbell handling */
-+ addr = SIFSLV_IPPC + SSUSB_IP_SPAR0;
-+ temp = 0x1;
-+ writel(temp, addr);
-+
-+ /* Set SW PLL Stable mode to 1 for U2 LPM device remote wakeup */
-+ /* Port 0 */
-+ addr = U2_PHY_BASE + U2_PHYD_CR1;
-+ temp = readl(addr);
-+ temp &= ~(0x3 << 18);
-+ temp |= (1 << 18);
-+ writel(temp, addr);
-+
-+ /* Port 1 */
-+ addr = U2_PHY_BASE_P1 + U2_PHYD_CR1;
-+ temp = readl(addr);
-+ temp &= ~(0x3 << 18);
-+ temp |= (1 << 18);
-+ writel(temp, addr);
-+}
-+
-+
-+void setLatchSel(void){
-+ __u32 __iomem *latch_sel_addr;
-+ u32 latch_sel_value;
-+ latch_sel_addr = U3_PIPE_LATCH_SEL_ADD;
-+ latch_sel_value = ((U3_PIPE_LATCH_TX)<<2) | (U3_PIPE_LATCH_RX);
-+ writel(latch_sel_value, latch_sel_addr);
-+}
-+
-+void reinitIP(void){
-+ __u32 __iomem *ip_reset_addr;
-+ u32 ip_reset_value;
-+
-+ enableAllClockPower();
-+ mtk_xhci_scheduler_init();
-+}
-+
-+void dbg_prb_out(void){
-+ mtk_probe_init(0x0f0f0f0f);
-+ mtk_probe_out(0xffffffff);
-+ mtk_probe_out(0x01010101);
-+ mtk_probe_out(0x02020202);
-+ mtk_probe_out(0x04040404);
-+ mtk_probe_out(0x08080808);
-+ mtk_probe_out(0x10101010);
-+ mtk_probe_out(0x20202020);
-+ mtk_probe_out(0x40404040);
-+ mtk_probe_out(0x80808080);
-+ mtk_probe_out(0x55555555);
-+ mtk_probe_out(0xaaaaaaaa);
-+}
-+
-+
-+
-+///////////////////////////////////////////////////////////////////////////////
-+
-+#define RET_SUCCESS 0
-+#define RET_FAIL 1
-+
-+static int dbg_u3w(int argc, char**argv)
-+{
-+ int u4TimingValue;
-+ char u1TimingValue;
-+ int u4TimingAddress;
-+
-+ if (argc<3)
-+ {
-+ printk(KERN_ERR "Arg: address value\n");
-+ return RET_FAIL;
-+ }
-+ u3phy_init();
-+
-+ u4TimingAddress = (int)simple_strtol(argv[1], &argv[1], 16);
-+ u4TimingValue = (int)simple_strtol(argv[2], &argv[2], 16);
-+ u1TimingValue = u4TimingValue & 0xff;
-+ /* access MMIO directly */
-+ writel(u1TimingValue, u4TimingAddress);
-+ printk(KERN_ERR "Write done\n");
-+ return RET_SUCCESS;
-+
-+}
-+
-+static int dbg_u3r(int argc, char**argv)
-+{
-+ char u1ReadTimingValue;
-+ int u4TimingAddress;
-+ if (argc<2)
-+ {
-+ printk(KERN_ERR "Arg: address\n");
-+ return 0;
-+ }
-+ u3phy_init();
-+ mdelay(500);
-+ u4TimingAddress = (int)simple_strtol(argv[1], &argv[1], 16);
-+ /* access MMIO directly */
-+ u1ReadTimingValue = readl(u4TimingAddress);
-+ printk(KERN_ERR "Value = 0x%x\n", u1ReadTimingValue);
-+ return 0;
-+}
-+
-+static int dbg_u3init(int argc, char**argv)
-+{
-+ int ret;
-+ ret = u3phy_init();
-+ printk(KERN_ERR "phy registers and operations initial done\n");
-+ if(u3phy_ops->u2_slew_rate_calibration){
-+ u3phy_ops->u2_slew_rate_calibration(u3phy);
-+ }
-+ else{
-+ printk(KERN_ERR "WARN: PHY doesn't implement u2 slew rate calibration function\n");
-+ }
-+ if(u3phy_ops->init(u3phy) == PHY_TRUE)
-+ return RET_SUCCESS;
-+ return RET_FAIL;
-+}
-+
-+void dbg_setU1U2(int argc, char**argv){
-+ struct xhci_hcd *xhci;
-+ int u1_value;
-+ int u2_value;
-+ u32 port_id, temp;
-+ u32 __iomem *addr;
-+
-+ if (argc<3)
-+ {
-+ printk(KERN_ERR "Arg: u1value u2value\n");
-+ return RET_FAIL;
-+ }
-+
-+ u1_value = (int)simple_strtol(argv[1], &argv[1], 10);
-+ u2_value = (int)simple_strtol(argv[2], &argv[2], 10);
-+ addr = (SSUSB_U3_XHCI_BASE + 0x424);
-+ temp = readl(addr);
-+ temp = temp & (~(0x0000ffff));
-+ temp = temp | u1_value | (u2_value<<8);
-+ writel(temp, addr);
-+}
-+///////////////////////////////////////////////////////////////////////////////
-+
-+int call_function(char *buf)
-+{
-+ int i;
-+ int argc;
-+ char *argv[80];
-+
-+ argc = 0;
-+ do
-+ {
-+ argv[argc] = strsep(&buf, " ");
-+ printk(KERN_DEBUG "[%d] %s\r\n", argc, argv[argc]);
-+ argc++;
-+ } while (buf);
-+ if (!strcmp("dbg.r", argv[0]))
-+ dbg_prb_out();
-+ else if (!strcmp("dbg.u3w", argv[0]))
-+ dbg_u3w(argc, argv);
-+ else if (!strcmp("dbg.u3r", argv[0]))
-+ dbg_u3r(argc, argv);
-+ else if (!strcmp("dbg.u3i", argv[0]))
-+ dbg_u3init(argc, argv);
-+ else if (!strcmp("pw.u1u2", argv[0]))
-+ dbg_setU1U2(argc, argv);
-+ return 0;
-+}
-+
-+long xhci_mtk_test_unlock_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-+{
-+ char w_buf[200];
-+ char r_buf[200] = "this is a test";
-+ int len = 200;
-+
-+ switch (cmd) {
-+ case IOCTL_READ:
-+ copy_to_user((char *) arg, r_buf, len);
-+ printk(KERN_DEBUG "IOCTL_READ: %s\r\n", r_buf);
-+ break;
-+ case IOCTL_WRITE:
-+ copy_from_user(w_buf, (char *) arg, len);
-+ printk(KERN_DEBUG "IOCTL_WRITE: %s\r\n", w_buf);
-+
-+ //invoke function
-+ return call_function(w_buf);
-+ break;
-+ default:
-+ return -ENOTTY;
-+ }
-+
-+ return len;
-+}
-+
-+int xhci_mtk_test_open(struct inode *inode, struct file *file)
-+{
-+
-+ printk(KERN_DEBUG "xhci_mtk_test open: successful\n");
-+ return 0;
-+}
-+
-+int xhci_mtk_test_release(struct inode *inode, struct file *file)
-+{
-+
-+ printk(KERN_DEBUG "xhci_mtk_test release: successful\n");
-+ return 0;
-+}
-+
-+ssize_t xhci_mtk_test_read(struct file *file, char *buf, size_t count, loff_t *ptr)
-+{
-+
-+ printk(KERN_DEBUG "xhci_mtk_test read: returning zero bytes\n");
-+ return 0;
-+}
-+
-+ssize_t xhci_mtk_test_write(struct file *file, const char *buf, size_t count, loff_t * ppos)
-+{
-+
-+ printk(KERN_DEBUG "xhci_mtk_test write: accepting zero bytes\n");
-+ return 0;
-+}
-+
-+
-+
-+
---- /dev/null
-+++ b/drivers/usb/host/xhci-mtk.h
-@@ -0,0 +1,120 @@
-+#ifndef _XHCI_MTK_H
-+#define _XHCI_MTK_H
-+
-+#include <linux/usb.h>
-+#include "xhci.h"
-+
-+#define SSUSB_U3_XHCI_BASE 0xBE1C0000
-+#define SSUSB_U3_MAC_BASE 0xBE1C2400
-+#define SSUSB_U3_SYS_BASE 0xBE1C2600
-+#define SSUSB_U2_SYS_BASE 0xBE1C3400
-+#define SSUB_SIF_SLV_TOP 0xBE1D0000
-+#define SIFSLV_IPPC (SSUB_SIF_SLV_TOP + 0x700)
-+
-+#define U3_PIPE_LATCH_SEL_ADD SSUSB_U3_MAC_BASE + 0x130
-+#define U3_PIPE_LATCH_TX 0
-+#define U3_PIPE_LATCH_RX 0
-+
-+#define U3_UX_EXIT_LFPS_TIMING_PAR 0xa0
-+#define U3_REF_CK_PAR 0xb0
-+#define U3_RX_UX_EXIT_LFPS_REF_OFFSET 8
-+#define U3_RX_UX_EXIT_LFPS_REF 3
-+#define U3_REF_CK_VAL 10
-+
-+#define U3_TIMING_PULSE_CTRL 0xb4
-+#define CNT_1US_VALUE 63 //62.5MHz:63, 70MHz:70, 80MHz:80, 100MHz:100, 125MHz:125
-+
-+#define USB20_TIMING_PARAMETER 0x40
-+#define TIME_VALUE_1US 63 //62.5MHz:63, 80MHz:80, 100MHz:100, 125MHz:125
-+
-+#define LINK_PM_TIMER 0x8
-+#define PM_LC_TIMEOUT_VALUE 3
-+
-+#define XHCI_IMOD 0x624
-+#define XHCI_IMOD_MT7621_VALUE 0x10
-+
-+#define SSUSB_HDMA_CFG 0x950
-+#define SSUSB_HDMA_CFG_MT7621_VALUE 0x10E0E0C
-+
-+#define U3_LTSSM_TIMING_PARAMETER3 0x2514
-+#define U3_LTSSM_TIMING_PARAMETER3_VALUE 0x3E8012C
-+
-+#define U2_PHYD_CR1 0x64
-+
-+#define SSUSB_IP_SPAR0 0xC8
-+
-+#define SYNC_HS_EOF 0x938
-+#define SYNC_HS_EOF_VALUE 0x201F3
-+
-+#define HSCH_CFG1 0x960
-+#define SCH2_FIFO_DEPTH_OFFSET 16
-+
-+
-+#define SSUSB_IP_PW_CTRL (SIFSLV_IPPC+0x0)
-+#define SSUSB_IP_SW_RST (1<<0)
-+#define SSUSB_IP_PW_CTRL_1 (SIFSLV_IPPC+0x4)
-+#define SSUSB_IP_PDN (1<<0)
-+#define SSUSB_U3_CTRL(p) (SIFSLV_IPPC+0x30+(p*0x08))
-+#define SSUSB_U3_PORT_DIS (1<<0)
-+#define SSUSB_U3_PORT_PDN (1<<1)
-+#define SSUSB_U3_PORT_HOST_SEL (1<<2)
-+#define SSUSB_U3_PORT_CKBG_EN (1<<3)
-+#define SSUSB_U3_PORT_MAC_RST (1<<4)
-+#define SSUSB_U3_PORT_PHYD_RST (1<<5)
-+#define SSUSB_U2_CTRL(p) (SIFSLV_IPPC+(0x50)+(p*0x08))
-+#define SSUSB_U2_PORT_DIS (1<<0)
-+#define SSUSB_U2_PORT_PDN (1<<1)
-+#define SSUSB_U2_PORT_HOST_SEL (1<<2)
-+#define SSUSB_U2_PORT_CKBG_EN (1<<3)
-+#define SSUSB_U2_PORT_MAC_RST (1<<4)
-+#define SSUSB_U2_PORT_PHYD_RST (1<<5)
-+#define SSUSB_IP_CAP (SIFSLV_IPPC+0x024)
-+
-+#define SSUSB_U3_PORT_NUM(p) (p & 0xff)
-+#define SSUSB_U2_PORT_NUM(p) ((p>>8) & 0xff)
-+
-+
-+#define XHCI_MTK_TEST_MAJOR 234
-+#define DEVICE_NAME "xhci_mtk_test"
-+
-+#define CLI_MAGIC 'CLI'
-+#define IOCTL_READ _IOR(CLI_MAGIC, 0, int)
-+#define IOCTL_WRITE _IOW(CLI_MAGIC, 1, int)
-+
-+void reinitIP(void);
-+void setInitialReg(void);
-+void dbg_prb_out(void);
-+int call_function(char *buf);
-+
-+long xhci_mtk_test_unlock_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
-+int xhci_mtk_test_open(struct inode *inode, struct file *file);
-+int xhci_mtk_test_release(struct inode *inode, struct file *file);
-+ssize_t xhci_mtk_test_read(struct file *file, char *buf, size_t count, loff_t *ptr);
-+ssize_t xhci_mtk_test_write(struct file *file, const char *buf, size_t count, loff_t * ppos);
-+
-+/*
-+ mediatek probe out
-+*/
-+/************************************************************************************/
-+
-+#define SW_PRB_OUT_ADDR (SIFSLV_IPPC+0xc0)
-+#define PRB_MODULE_SEL_ADDR (SIFSLV_IPPC+0xbc)
-+
-+static inline void mtk_probe_init(const u32 byte){
-+ __u32 __iomem *ptr = (__u32 __iomem *) PRB_MODULE_SEL_ADDR;
-+ writel(byte, ptr);
-+}
-+
-+static inline void mtk_probe_out(const u32 value){
-+ __u32 __iomem *ptr = (__u32 __iomem *) SW_PRB_OUT_ADDR;
-+ writel(value, ptr);
-+}
-+
-+static inline u32 mtk_probe_value(void){
-+ __u32 __iomem *ptr = (__u32 __iomem *) SW_PRB_OUT_ADDR;
-+
-+ return readl(ptr);
-+}
-+
-+
-+#endif
---- a/drivers/usb/host/xhci-plat.c
-+++ b/drivers/usb/host/xhci-plat.c
-@@ -33,6 +33,13 @@ static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
- * dev struct in order to setup MSI
- */
- xhci->quirks |= XHCI_PLAT;
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ /* MTK host controller gives a spurious successful event after a
-+ * short transfer. Ignore it.
-+ */
-+ xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
-+ xhci->quirks |= XHCI_LPM_SUPPORT;
-+#endif
- }
-
- /* called during probe() after chip reset completes */
-@@ -79,7 +86,11 @@ static int xhci_plat_probe(struct platform_device *pdev)
-
- driver = &xhci_plat_hc_driver;
-
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ irq = XHC_IRQ;
-+#else
- irq = platform_get_irq(pdev, 0);
-+#endif
- if (irq < 0)
- return -ENODEV;
-
---- a/drivers/usb/host/xhci-ring.c
-+++ b/drivers/usb/host/xhci-ring.c
-@@ -254,16 +254,20 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring,
- static inline int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring,
- unsigned int num_trbs)
- {
-+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
- int num_trbs_in_deq_seg;
-+#endif
-
- if (ring->num_trbs_free < num_trbs)
- return 0;
-
-+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
- if (ring->type != TYPE_COMMAND && ring->type != TYPE_EVENT) {
- num_trbs_in_deq_seg = ring->dequeue - ring->deq_seg->trbs;
- if (ring->num_trbs_free < num_trbs + num_trbs_in_deq_seg)
- return 0;
- }
-+#endif
-
- return 1;
- }
-@@ -2799,6 +2803,7 @@ static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
- next = ring->enqueue;
-
- while (last_trb(xhci, ring, ring->enq_seg, next)) {
-+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
- /* If we're not dealing with 0.95 hardware or isoc rings
- * on AMD 0.96 host, clear the chain bit.
- */
-@@ -2808,6 +2813,9 @@ static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
- next->link.control &= cpu_to_le32(~TRB_CHAIN);
- else
- next->link.control |= cpu_to_le32(TRB_CHAIN);
-+#else
-+ next->link.control &= cpu_to_le32(~TRB_CHAIN);
-+#endif
-
- wmb();
- next->link.control ^= cpu_to_le32(TRB_CYCLE);
-@@ -2938,6 +2946,9 @@ static void giveback_first_trb(struct xhci_hcd *xhci, int slot_id,
- start_trb->field[3] |= cpu_to_le32(start_cycle);
- else
- start_trb->field[3] &= cpu_to_le32(~TRB_CYCLE);
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ wmb();
-+#endif
- xhci_ring_ep_doorbell(xhci, slot_id, ep_index, stream_id);
- }
-
-@@ -2993,6 +3004,29 @@ static u32 xhci_td_remainder(unsigned int remainder)
- return (remainder >> 10) << 17;
- }
-
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+static u32 mtk_xhci_td_remainder(unsigned int td_transfer_size, unsigned int td_running_total, unsigned int maxp, unsigned trb_buffer_length)
-+{
-+ u32 max = 31;
-+ int remainder, td_packet_count, packet_transferred;
-+
-+ //0 for the last TRB
-+ //FIXME: need to workaround if there is ZLP in this TD
-+ if (td_running_total + trb_buffer_length == td_transfer_size)
-+ return 0;
-+
-+ //FIXME: need to take care of high-bandwidth (MAX_ESIT)
-+ packet_transferred = (td_running_total /*+ trb_buffer_length*/) / maxp;
-+ td_packet_count = DIV_ROUND_UP(td_transfer_size, maxp);
-+ remainder = td_packet_count - packet_transferred;
-+
-+ if (remainder > max)
-+ return max << 17;
-+ else
-+ return remainder << 17;
-+}
-+#endif
-+
- /*
- * For xHCI 1.0 host controllers, TD size is the number of max packet sized
- * packets remaining in the TD (*not* including this TRB).
-@@ -3130,6 +3164,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
- }
-
- /* Set the TRB length, TD size, and interrupter fields. */
-+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
- if (xhci->hci_version < 0x100) {
- remainder = xhci_td_remainder(
- urb->transfer_buffer_length -
-@@ -3139,6 +3174,12 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
- trb_buff_len, total_packet_count, urb,
- num_trbs - 1);
- }
-+#else
-+ if (num_trbs > 1)
-+ remainder = mtk_xhci_td_remainder(urb->transfer_buffer_length,
-+ running_total, urb->ep->desc.wMaxPacketSize, trb_buff_len);
-+#endif
-+
- length_field = TRB_LEN(trb_buff_len) |
- remainder |
- TRB_INTR_TARGET(0);
-@@ -3201,6 +3242,9 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
- int running_total, trb_buff_len, ret;
- unsigned int total_packet_count;
- u64 addr;
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ int max_packet;
-+#endif
-
- if (urb->num_sgs)
- return queue_bulk_sg_tx(xhci, mem_flags, urb, slot_id, ep_index);
-@@ -3226,6 +3270,25 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
- running_total += TRB_MAX_BUFF_SIZE;
- }
- /* FIXME: this doesn't deal with URB_ZERO_PACKET - need one more */
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ switch(urb->dev->speed){
-+ case USB_SPEED_SUPER:
-+ max_packet = urb->ep->desc.wMaxPacketSize;
-+ break;
-+ case USB_SPEED_HIGH:
-+ case USB_SPEED_FULL:
-+ case USB_SPEED_LOW:
-+ case USB_SPEED_WIRELESS:
-+ case USB_SPEED_UNKNOWN:
-+ default:
-+ max_packet = urb->ep->desc.wMaxPacketSize & 0x7ff;
-+ break;
-+ }
-+ if((urb->transfer_flags & URB_ZERO_PACKET)
-+ && ((urb->transfer_buffer_length % max_packet) == 0)){
-+ num_trbs++;
-+ }
-+#endif
-
- ret = prepare_transfer(xhci, xhci->devs[slot_id],
- ep_index, urb->stream_id,
-@@ -3285,6 +3348,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
- field |= TRB_ISP;
-
- /* Set the TRB length, TD size, and interrupter fields. */
-+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
- if (xhci->hci_version < 0x100) {
- remainder = xhci_td_remainder(
- urb->transfer_buffer_length -
-@@ -3294,6 +3358,10 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
- trb_buff_len, total_packet_count, urb,
- num_trbs - 1);
- }
-+#else
-+ remainder = mtk_xhci_td_remainder(urb->transfer_buffer_length, running_total, max_packet, trb_buff_len);
-+#endif
-+
- length_field = TRB_LEN(trb_buff_len) |
- remainder |
- TRB_INTR_TARGET(0);
-@@ -3383,7 +3451,11 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
- field |= 0x1;
-
- /* xHCI 1.0 6.4.1.2.1: Transfer Type field */
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ if (1) {
-+#else
- if (xhci->hci_version == 0x100) {
-+#endif
- if (urb->transfer_buffer_length > 0) {
- if (setup->bRequestType & USB_DIR_IN)
- field |= TRB_TX_TYPE(TRB_DATA_IN);
-@@ -3407,7 +3479,12 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
- field = TRB_TYPE(TRB_DATA);
-
- length_field = TRB_LEN(urb->transfer_buffer_length) |
-+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
- xhci_td_remainder(urb->transfer_buffer_length) |
-+#else
-+ //CC: MTK style, no scatter-gather for control transfer
-+ 0 |
-+#endif
- TRB_INTR_TARGET(0);
- if (urb->transfer_buffer_length > 0) {
- if (setup->bRequestType & USB_DIR_IN)
-@@ -3530,6 +3607,9 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
- u64 start_addr, addr;
- int i, j;
- bool more_trbs_coming;
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ int max_packet;
-+#endif
-
- ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
-
-@@ -3543,6 +3623,21 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
- start_trb = &ep_ring->enqueue->generic;
- start_cycle = ep_ring->cycle_state;
-
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ switch(urb->dev->speed){
-+ case USB_SPEED_SUPER:
-+ max_packet = urb->ep->desc.wMaxPacketSize;
-+ break;
-+ case USB_SPEED_HIGH:
-+ case USB_SPEED_FULL:
-+ case USB_SPEED_LOW:
-+ case USB_SPEED_WIRELESS:
-+ case USB_SPEED_UNKNOWN:
-+ max_packet = urb->ep->desc.wMaxPacketSize & 0x7ff;
-+ break;
-+ }
-+#endif
-+
- urb_priv = urb->hcpriv;
- /* Queue the first TRB, even if it's zero-length */
- for (i = 0; i < num_tds; i++) {
-@@ -3614,9 +3709,13 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
- } else {
- td->last_trb = ep_ring->enqueue;
- field |= TRB_IOC;
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ if (!(xhci->quirks & XHCI_AVOID_BEI)) {
-+#else
- if (xhci->hci_version == 0x100 &&
- !(xhci->quirks &
- XHCI_AVOID_BEI)) {
-+#endif
- /* Set BEI bit except for the last td */
- if (i < num_tds - 1)
- field |= TRB_BEI;
-@@ -3631,6 +3730,7 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
- trb_buff_len = td_remain_len;
-
- /* Set the TRB length, TD size, & interrupter fields. */
-+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
- if (xhci->hci_version < 0x100) {
- remainder = xhci_td_remainder(
- td_len - running_total);
-@@ -3640,6 +3740,10 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
- total_packet_count, urb,
- (trbs_per_td - j - 1));
- }
-+#else
-+ remainder = mtk_xhci_td_remainder(urb->transfer_buffer_length, running_total, max_packet, trb_buff_len);
-+#endif
-+
- length_field = TRB_LEN(trb_buff_len) |
- remainder |
- TRB_INTR_TARGET(0);
---- a/drivers/usb/host/xhci.c
-+++ b/drivers/usb/host/xhci.c
-@@ -32,6 +32,16 @@
- #include "xhci.h"
- #include "xhci-trace.h"
-
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+#include <asm/uaccess.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/platform_device.h>
-+#include "mtk-phy.h"
-+#include "xhci-mtk-scheduler.h"
-+#include "xhci-mtk-power.h"
-+#include "xhci-mtk.h"
-+#endif
-+
- #define DRIVER_AUTHOR "Sarah Sharp"
- #define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver"
-
-@@ -46,6 +56,18 @@ static unsigned int quirks;
- module_param(quirks, uint, S_IRUGO);
- MODULE_PARM_DESC(quirks, "Bit flags for quirks to be enabled as default");
-
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+long xhci_mtk_test_unlock_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
-+static struct file_operations xhci_mtk_test_fops = {
-+ .owner = THIS_MODULE,
-+ .read = xhci_mtk_test_read,
-+ .write = xhci_mtk_test_write,
-+ .unlocked_ioctl = xhci_mtk_test_unlock_ioctl,
-+ .open = xhci_mtk_test_open,
-+ .release = xhci_mtk_test_release,
-+};
-+#endif
-+
- /* TODO: copied from ehci-hcd.c - can this be refactored? */
- /*
- * xhci_handshake - spin reading hc until handshake completes or fails
-@@ -198,7 +220,7 @@ int xhci_reset(struct xhci_hcd *xhci)
- return ret;
- }
-
--#ifdef CONFIG_PCI
-+#if defined (CONFIG_PCI) && !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
- static int xhci_free_msi(struct xhci_hcd *xhci)
- {
- int i;
-@@ -448,6 +470,11 @@ static void compliance_mode_recovery(unsigned long arg)
- "Attempting compliance mode recovery");
- hcd = xhci->shared_hcd;
-
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ temp |= (1 << 31);
-+ writel(temp, xhci->usb3_ports[i]);
-+#endif
-+
- if (hcd->state == HC_STATE_SUSPENDED)
- usb_hcd_resume_root_hub(hcd);
-
-@@ -497,6 +524,9 @@ static bool xhci_compliance_mode_recovery_timer_quirk_check(void)
- {
- const char *dmi_product_name, *dmi_sys_vendor;
-
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ return true;
-+#endif
- dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
- dmi_sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR);
- if (!dmi_product_name || !dmi_sys_vendor)
-@@ -542,6 +572,10 @@ int xhci_init(struct usb_hcd *hcd)
- xhci_dbg_trace(xhci, trace_xhci_dbg_init,
- "xHCI doesn't need link TRB QUIRK");
- }
-+
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ mtk_xhci_scheduler_init();
-+#endif
- retval = xhci_mem_init(xhci, GFP_KERNEL);
- xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Finished xhci_init");
-
-@@ -626,7 +660,11 @@ int xhci_run(struct usb_hcd *hcd)
- "// Set the interrupt modulation register");
- temp = readl(&xhci->ir_set->irq_control);
- temp &= ~ER_IRQ_INTERVAL_MASK;
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ temp |= (u32) 16;
-+#else
- temp |= (u32) 160;
-+#endif
- writel(temp, &xhci->ir_set->irq_control);
-
- /* Set the HCD state before we enable the irqs */
-@@ -651,6 +689,9 @@ int xhci_run(struct usb_hcd *hcd)
- xhci_queue_vendor_command(xhci, command, 0, 0, 0,
- TRB_TYPE(TRB_NEC_GET_FW));
- }
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ enableXhciAllPortPower(xhci);
-+#endif
- xhci_dbg_trace(xhci, trace_xhci_dbg_init,
- "Finished xhci_run for USB2 roothub");
- return 0;
-@@ -1642,6 +1683,14 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
- u32 drop_flag;
- u32 new_add_flags, new_drop_flags;
- int ret;
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+#if MTK_SCH_NEW
-+ struct xhci_slot_ctx *slot_ctx;
-+ struct sch_ep *sch_ep = NULL;
-+ int isTT;
-+ int ep_type;
-+#endif
-+#endif
-
- ret = xhci_check_args(hcd, udev, ep, 1, true, __func__);
- if (ret <= 0)
-@@ -1689,6 +1738,40 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
-
- xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep);
-
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+#if MTK_SCH_NEW
-+ slot_ctx = xhci_get_slot_ctx(xhci, xhci->devs[udev->slot_id]->out_ctx);
-+ if ((slot_ctx->tt_info & 0xff) > 0) {
-+ isTT = 1;
-+ }
-+ else {
-+ isTT = 0;
-+ }
-+ if (usb_endpoint_xfer_int(&ep->desc)) {
-+ ep_type = USB_EP_INT;
-+ }
-+ else if (usb_endpoint_xfer_isoc(&ep->desc)) {
-+ ep_type = USB_EP_ISOC;
-+ }
-+ else if (usb_endpoint_xfer_bulk(&ep->desc)) {
-+ ep_type = USB_EP_BULK;
-+ }
-+ else
-+ ep_type = USB_EP_CONTROL;
-+
-+ sch_ep = mtk_xhci_scheduler_remove_ep(udev->speed, usb_endpoint_dir_in(&ep->desc)
-+ , isTT, ep_type, (mtk_u32 *)ep);
-+ if (sch_ep != NULL) {
-+ kfree(sch_ep);
-+ }
-+ else {
-+ xhci_dbg(xhci, "[MTK]Doesn't find ep_sch instance when removing endpoint\n");
-+ }
-+#else
-+ mtk_xhci_scheduler_remove_ep(xhci, udev, ep);
-+#endif
-+#endif
-+
- xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x\n",
- (unsigned int) ep->desc.bEndpointAddress,
- udev->slot_id,
-@@ -1721,6 +1804,19 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
- u32 new_add_flags, new_drop_flags;
- struct xhci_virt_device *virt_dev;
- int ret = 0;
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ struct xhci_ep_ctx *in_ep_ctx;
-+#if MTK_SCH_NEW
-+ struct xhci_slot_ctx *slot_ctx;
-+ struct sch_ep *sch_ep;
-+ int isTT;
-+ int ep_type;
-+ int maxp = 0;
-+ int burst = 0;
-+ int mult = 0;
-+ int interval;
-+#endif
-+#endif
-
- ret = xhci_check_args(hcd, udev, ep, 1, true, __func__);
- if (ret <= 0) {
-@@ -1787,6 +1883,56 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
- return -ENOMEM;
- }
-
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ in_ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, ep_index);
-+#if MTK_SCH_NEW
-+ slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx);
-+ if ((slot_ctx->tt_info & 0xff) > 0) {
-+ isTT = 1;
-+ }
-+ else {
-+ isTT = 0;
-+ }
-+ if (usb_endpoint_xfer_int(&ep->desc)) {
-+ ep_type = USB_EP_INT;
-+ }
-+ else if (usb_endpoint_xfer_isoc(&ep->desc)) {
-+ ep_type = USB_EP_ISOC;
-+ }
-+ else if (usb_endpoint_xfer_bulk(&ep->desc)) {
-+ ep_type = USB_EP_BULK;
-+ }
-+ else
-+ ep_type = USB_EP_CONTROL;
-+
-+ if (udev->speed == USB_SPEED_FULL || udev->speed == USB_SPEED_HIGH
-+ || udev->speed == USB_SPEED_LOW) {
-+ maxp = ep->desc.wMaxPacketSize & 0x7FF;
-+ burst = ep->desc.wMaxPacketSize >> 11;
-+ mult = 0;
-+ }
-+ else if (udev->speed == USB_SPEED_SUPER) {
-+ maxp = ep->desc.wMaxPacketSize & 0x7FF;
-+ burst = ep->ss_ep_comp.bMaxBurst;
-+ mult = ep->ss_ep_comp.bmAttributes & 0x3;
-+ }
-+ interval = (1 << ((in_ep_ctx->ep_info >> 16) & 0xff));
-+ sch_ep = kmalloc(sizeof(struct sch_ep), GFP_KERNEL);
-+ if (mtk_xhci_scheduler_add_ep(udev->speed, usb_endpoint_dir_in(&ep->desc),
-+ isTT, ep_type, maxp, interval, burst, mult, (mtk_u32 *)ep
-+ , (mtk_u32 *)in_ep_ctx, sch_ep) != SCH_SUCCESS) {
-+ xhci_err(xhci, "[MTK] not enough bandwidth\n");
-+
-+ return -ENOSPC;
-+ }
-+#else
-+ if (mtk_xhci_scheduler_add_ep(xhci, udev, ep, in_ep_ctx) != SCH_SUCCESS) {
-+ xhci_err(xhci, "[MTK] not enough bandwidth\n");
-+
-+ return -ENOSPC;
-+ }
-+#endif
-+#endif
- ctrl_ctx->add_flags |= cpu_to_le32(added_ctxs);
- new_add_flags = le32_to_cpu(ctrl_ctx->add_flags);
-
-@@ -4451,8 +4597,14 @@ static u16 xhci_call_host_update_timeout_for_endpoint(struct xhci_hcd *xhci,
- u16 *timeout)
- {
- if (state == USB3_LPM_U1)
-+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ if (xhci->quirks & XHCI_INTEL_HOST)
-+#endif
- return xhci_calculate_u1_timeout(xhci, udev, desc);
- else if (state == USB3_LPM_U2)
-+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ if (xhci->quirks & XHCI_INTEL_HOST)
-+#endif
- return xhci_calculate_u2_timeout(xhci, udev, desc);
-
- return USB3_LPM_DISABLED;
-@@ -4837,7 +4989,9 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
- hcd->self.no_sg_constraint = 1;
-
- /* XHCI controllers don't stop the ep queue on short packets :| */
-+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
- hcd->self.no_stop_on_short = 1;
-+#endif
-
- if (usb_hcd_is_primary_hcd(hcd)) {
- xhci = kzalloc(sizeof(struct xhci_hcd), GFP_KERNEL);
-@@ -4900,6 +5054,10 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
- goto error;
- xhci_dbg(xhci, "Reset complete\n");
-
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ setInitialReg();
-+#endif
-+
- /* Set dma_mask and coherent_dma_mask to 64-bits,
- * if xHC supports 64-bit addressing */
- if (HCC_64BIT_ADDR(xhci->hcc_params) &&
-@@ -4994,8 +5152,57 @@ MODULE_DESCRIPTION(DRIVER_DESC);
- MODULE_AUTHOR(DRIVER_AUTHOR);
- MODULE_LICENSE("GPL");
-
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+static struct resource xhci_resouce[] = {
-+ {
-+ .name = "xhci-hcd",
-+ .start = XHC_IO_START,
-+ .end = XHC_IO_START + XHC_IO_LENGTH -1,
-+ .flags = IORESOURCE_MEM,
-+ }
-+};
-+
-+static struct platform_device xhci_platform_dev = {
-+ .name = "xhci-hcd",
-+ .id = -1,
-+ .dev = {
-+ .coherent_dma_mask = 0xffffffff,
-+ },
-+ .resource = xhci_resouce,
-+};
-+#endif
-+
- static int __init xhci_hcd_init(void)
- {
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ struct platform_device *pPlatformDev;
-+
-+ register_chrdev(XHCI_MTK_TEST_MAJOR, DEVICE_NAME, &xhci_mtk_test_fops);
-+
-+ u3phy_init();
-+ if (u3phy_ops->u2_slew_rate_calibration) {
-+ u3phy_ops->u2_slew_rate_calibration(u3phy);
-+ u3phy_ops->u2_slew_rate_calibration(u3phy_p1);
-+ }
-+ else{
-+ printk(KERN_ERR "WARN: PHY doesn't implement u2 slew rate calibration function\n");
-+ }
-+ u3phy_ops->init(u3phy);
-+ reinitIP();
-+
-+ pPlatformDev = &xhci_platform_dev;
-+ memset(pPlatformDev, 0, sizeof(struct platform_device));
-+ pPlatformDev->name = "xhci-hcd";
-+ pPlatformDev->id = -1;
-+ pPlatformDev->dev.coherent_dma_mask = 0xffffffff;
-+ pPlatformDev->dev.dma_mask = &pPlatformDev->dev.coherent_dma_mask;
-+ pPlatformDev->resource = xhci_resouce;
-+ pPlatformDev->num_resources = ARRAY_SIZE(xhci_resouce);
-+
-+ platform_device_register(&xhci_platform_dev);
-+
-+#endif
-+
- /*
- * Check the compiler generated sizes of structures that must be laid
- * out in specific ways for hardware access.
---- a/drivers/usb/host/xhci.h
-+++ b/drivers/usb/host/xhci.h
-@@ -32,6 +32,21 @@
- #include "xhci-ext-caps.h"
- #include "pci-quirks.h"
-
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+#define XHC_IRQ (22 + 8)
-+#define XHC_IO_START 0x1E1C0000
-+#define XHC_IO_LENGTH 0x10000
-+/* mtk scheduler bitmasks */
-+#define BPKTS(p) ((p) & 0x3f)
-+#define BCSCOUNT(p) (((p) & 0x7) << 8)
-+#define BBM(p) ((p) << 11)
-+#define BOFFSET(p) ((p) & 0x3fff)
-+#define BREPEAT(p) (((p) & 0x7fff) << 16)
-+#endif
-+
-+
-+
-+
- /* xHCI PCI Configuration Registers */
- #define XHCI_SBRN_OFFSET (0x60)
-
-@@ -1582,8 +1597,12 @@ struct xhci_hcd {
- /* Compliance Mode Recovery Data */
- struct timer_list comp_mode_recovery_timer;
- u32 port_status_u0;
-+#ifdef CONFIG_USB_MT7621_XHCI_PLATFORM
-+#define COMP_MODE_RCVRY_MSECS 5000
-+#else
- /* Compliance Mode Timer Triggered every 2 seconds */
- #define COMP_MODE_RCVRY_MSECS 2000
-+#endif
- };
-
- /* convert between an HCD pointer and the corresponding EHCI_HCD */
-@@ -1731,6 +1750,26 @@ void xhci_urb_free_priv(struct xhci_hcd *xhci, struct urb_priv *urb_priv);
- void xhci_free_command(struct xhci_hcd *xhci,
- struct xhci_command *command);
-
-+#if defined (CONFIG_PCI) && !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+/* xHCI PCI glue */
-+int xhci_register_pci(void);
-+void xhci_unregister_pci(void);
-+#else
-+static inline int xhci_register_pci(void) { return 0; }
-+static inline void xhci_unregister_pci(void) {}
-+#endif
-+
-+#if defined(CONFIG_USB_XHCI_PLATFORM) \
-+ || defined(CONFIG_USB_XHCI_PLATFORM_MODULE)
-+int xhci_register_plat(void);
-+void xhci_unregister_plat(void);
-+#else
-+static inline int xhci_register_plat(void)
-+{ return 0; }
-+static inline void xhci_unregister_plat(void)
-+{ }
-+#endif
-+
- /* xHCI host controller glue */
- typedef void (*xhci_get_quirks_t)(struct device *, struct xhci_hcd *);
- int xhci_handshake(struct xhci_hcd *xhci, void __iomem *ptr,
---- a/drivers/usb/phy/Kconfig
-+++ b/drivers/usb/phy/Kconfig
-@@ -199,6 +199,14 @@ config USB_RCAR_GEN2_PHY
- To compile this driver as a module, choose M here: the
- module will be called phy-rcar-gen2-usb.
-
-+config RALINK_USBPHY
-+ bool "Ralink USB PHY controller Driver"
-+ depends on MIPS && RALINK
-+ select USB_PHY
-+ help
-+ Enable this to support ralink USB phy controller for ralink
-+ SoCs.
-+
- config USB_ULPI
- bool "Generic ULPI Transceiver Driver"
- depends on ARM || ARM64
---- a/drivers/usb/phy/Makefile
-+++ b/drivers/usb/phy/Makefile
-@@ -27,3 +27,4 @@ obj-$(CONFIG_USB_RCAR_GEN2_PHY) += phy-rcar-gen2-usb.o
- obj-$(CONFIG_USB_ULPI) += phy-ulpi.o
- obj-$(CONFIG_USB_ULPI_VIEWPORT) += phy-ulpi-viewport.o
- obj-$(CONFIG_KEYSTONE_USB_PHY) += phy-keystone.o
-+obj-$(CONFIG_RALINK_USBPHY) += ralink-phy.o
---- /dev/null
-+++ b/drivers/usb/phy/ralink-phy.c
-@@ -0,0 +1,193 @@
-+/*
-+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
-+ *
-+ * based on: Renesas R-Car USB phy driver
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/delay.h>
-+#include <linux/io.h>
-+#include <linux/usb/otg.h>
-+#include <linux/of_platform.h>
-+#include <linux/platform_device.h>
-+#include <linux/spinlock.h>
-+#include <linux/module.h>
-+#include <linux/reset.h>
-+
-+#include <asm/mach-ralink/ralink_regs.h>
-+
-+#define RT_SYSC_REG_SYSCFG1 0x014
-+#define RT_SYSC_REG_CLKCFG1 0x030
-+#define RT_SYSC_REG_USB_PHY_CFG 0x05c
-+
-+#define RT_RSTCTRL_UDEV BIT(25)
-+#define RT_RSTCTRL_UHST BIT(22)
-+#define RT_SYSCFG1_USB0_HOST_MODE BIT(10)
-+
-+#define MT7620_CLKCFG1_UPHY0_CLK_EN BIT(25)
-+#define MT7620_CLKCFG1_UPHY1_CLK_EN BIT(22)
-+#define RT_CLKCFG1_UPHY1_CLK_EN BIT(20)
-+#define RT_CLKCFG1_UPHY0_CLK_EN BIT(18)
-+
-+#define USB_PHY_UTMI_8B60M BIT(1)
-+#define UDEV_WAKEUP BIT(0)
-+
-+static atomic_t usb_pwr_ref = ATOMIC_INIT(0);
-+static struct reset_control *rstdev;
-+static struct reset_control *rsthost;
-+static u32 phy_clk;
-+
-+static void usb_phy_enable(int state)
-+{
-+ if (state)
-+ rt_sysc_m32(0, phy_clk, RT_SYSC_REG_CLKCFG1);
-+ else
-+ rt_sysc_m32(phy_clk, 0, RT_SYSC_REG_CLKCFG1);
-+ mdelay(100);
-+}
-+
-+static int usb_power_on(struct usb_phy *phy)
-+{
-+ if (atomic_inc_return(&usb_pwr_ref) == 1) {
-+ u32 t;
-+
-+ usb_phy_enable(1);
-+
-+// reset_control_assert(rstdev);
-+// reset_control_assert(rsthost);
-+
-+ if (OTG_STATE_B_HOST) {
-+ rt_sysc_m32(0, RT_SYSCFG1_USB0_HOST_MODE, RT_SYSC_REG_SYSCFG1);
-+ if (!IS_ERR(rsthost))
-+ reset_control_deassert(rsthost);
-+ if (!IS_ERR(rstdev))
-+ reset_control_deassert(rstdev);
-+ } else {
-+ rt_sysc_m32(RT_SYSCFG1_USB0_HOST_MODE, 0, RT_SYSC_REG_SYSCFG1);
-+ if (!IS_ERR(rstdev))
-+ reset_control_deassert(rstdev);
-+ }
-+ mdelay(100);
-+
-+ t = rt_sysc_r32(RT_SYSC_REG_USB_PHY_CFG);
-+ dev_info(phy->dev, "remote usb device wakeup %s\n",
-+ (t & UDEV_WAKEUP) ? ("enabbled") : ("disabled"));
-+ if (t & USB_PHY_UTMI_8B60M)
-+ dev_info(phy->dev, "UTMI 8bit 60MHz\n");
-+ else
-+ dev_info(phy->dev, "UTMI 16bit 30MHz\n");
-+ }
-+
-+ return 0;
-+}
-+
-+static void usb_power_off(struct usb_phy *phy)
-+{
-+ if (atomic_dec_return(&usb_pwr_ref) == 0) {
-+ usb_phy_enable(0);
-+ if (!IS_ERR(rstdev))
-+ reset_control_assert(rstdev);
-+ if (!IS_ERR(rsthost))
-+ reset_control_assert(rsthost);
-+ }
-+}
-+
-+static int usb_set_host(struct usb_otg *otg, struct usb_bus *host)
-+{
-+ otg->gadget = NULL;
-+ otg->host = host;
-+
-+ return 0;
-+}
-+
-+static int usb_set_peripheral(struct usb_otg *otg,
-+ struct usb_gadget *gadget)
-+{
-+ otg->host = NULL;
-+ otg->gadget = gadget;
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id ralink_usbphy_dt_match[] = {
-+ { .compatible = "ralink,rt3xxx-usbphy", .data = (void *) (RT_CLKCFG1_UPHY1_CLK_EN | RT_CLKCFG1_UPHY0_CLK_EN) },
-+ { .compatible = "ralink,mt7620a-usbphy", .data = (void *) (MT7620_CLKCFG1_UPHY1_CLK_EN | MT7620_CLKCFG1_UPHY0_CLK_EN) },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, ralink_usbphy_dt_match);
-+
-+static int usb_phy_probe(struct platform_device *pdev)
-+{
-+ const struct of_device_id *match;
-+ struct device *dev = &pdev->dev;
-+ struct usb_otg *otg;
-+ struct usb_phy *phy;
-+ int ret;
-+
-+ match = of_match_device(ralink_usbphy_dt_match, &pdev->dev);
-+ phy_clk = (int) match->data;
-+
-+ rsthost = devm_reset_control_get(&pdev->dev, "host");
-+ rstdev = devm_reset_control_get(&pdev->dev, "device");
-+
-+ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
-+ if (!phy) {
-+ dev_err(&pdev->dev, "unable to allocate memory for USB PHY\n");
-+ return -ENOMEM;
-+ }
-+
-+ otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
-+ if (!otg) {
-+ dev_err(&pdev->dev, "unable to allocate memory for USB OTG\n");
-+ return -ENOMEM;
-+ }
-+
-+ phy->dev = dev;
-+ phy->label = dev_name(dev);
-+ phy->init = usb_power_on;
-+ phy->shutdown = usb_power_off;
-+ otg->set_host = usb_set_host;
-+ otg->set_peripheral = usb_set_peripheral;
-+ otg->phy = phy;
-+ phy->otg = otg;
-+ ret = usb_add_phy(phy, USB_PHY_TYPE_USB2);
-+
-+ if (ret < 0) {
-+ dev_err(dev, "usb phy addition error\n");
-+ return ret;
-+ }
-+
-+ platform_set_drvdata(pdev, phy);
-+
-+ dev_info(&pdev->dev, "loaded\n");
-+
-+ return ret;
-+}
-+
-+static int usb_phy_remove(struct platform_device *pdev)
-+{
-+ struct usb_phy *phy = platform_get_drvdata(pdev);
-+
-+ usb_remove_phy(phy);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver usb_phy_driver = {
-+ .driver = {
-+ .owner = THIS_MODULE,
-+ .name = "rt3xxx-usbphy",
-+ .of_match_table = of_match_ptr(ralink_usbphy_dt_match),
-+ },
-+ .probe = usb_phy_probe,
-+ .remove = usb_phy_remove,
-+};
-+
-+module_platform_driver(usb_phy_driver);
-+
-+MODULE_LICENSE("GPL v2");
-+MODULE_DESCRIPTION("Ralink USB phy");
-+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
projects / openwrt / staging / thess.git / commitdiff