# INITRD_PHYS must be in RAM
ifeq ($(CONFIG_ARCH_AT91CAP9),y)
- zreladdr-y := 0x70008000
+ zreladdr-y += 0x70008000
params_phys-y := 0x70000100
initrd_phys-y := 0x70410000
else ifeq ($(CONFIG_ARCH_AT91SAM9G45),y)
- zreladdr-y := 0x70008000
+ zreladdr-y += 0x70008000
params_phys-y := 0x70000100
initrd_phys-y := 0x70410000
else
- zreladdr-y := 0x20008000
+ zreladdr-y += 0x20008000
params_phys-y := 0x20000100
initrd_phys-y := 0x20410000
endif
# Address where decompressor will be written and eventually executed.
#
# default to SDRAM
-zreladdr-y := $(CONFIG_BCM_ZRELADDR)
+zreladdr-y += $(CONFIG_BCM_ZRELADDR)
params_phys-y := 0x00000800
# The standard locations for stuff on CLPS711x type processors
- zreladdr-y := 0xc0028000
+ zreladdr-y += 0xc0028000
params_phys-y := 0xc0000100
# Should probably have some agreement on these...
initrd_phys-$(CONFIG_ARCH_P720T) := 0xc0400000
- zreladdr-y := 0x00008000
+ zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00C00000
ifeq ($(CONFIG_ARCH_DAVINCI_DMx),y)
$(error Cannot enable DaVinci and DA8XX platforms concurrently)
else
- zreladdr-y := 0xc0008000
+ zreladdr-y += 0xc0008000
params_phys-y := 0xc0000100
initrd_phys-y := 0xc0800000
endif
else
- zreladdr-y := 0x80008000
+ zreladdr-y += 0x80008000
params_phys-y := 0x80000100
initrd_phys-y := 0x80800000
endif
- zreladdr-y := 0x00008000
+ zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
- zreladdr-y := 0x00008000
+ zreladdr-y += 0x00008000
params_phys-y := 0x00000400
initrd_phys-y := 0x00800000
- zreladdr-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET) := 0x00008000
+ zreladdr-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET) += 0x00008000
params_phys-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET) := 0x00000100
- zreladdr-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) := 0xc0008000
+ zreladdr-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) += 0xc0008000
params_phys-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) := 0xc0000100
- zreladdr-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET) := 0xd0008000
+ zreladdr-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET) += 0xd0008000
params_phys-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET) := 0xd0000100
- zreladdr-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET) := 0xe0008000
+ zreladdr-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET) += 0xe0008000
params_phys-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET) := 0xe0000100
- zreladdr-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET) := 0xf0008000
+ zreladdr-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET) += 0xf0008000
params_phys-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET) := 0xf0000100
- zreladdr-y := 0x40008000
+ zreladdr-y += 0x40008000
params_phys-y := 0x40000100
- zreladdr-y := 0x00008000
+ zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
ifeq ($(CONFIG_GEMINI_MEM_SWAP),y)
- zreladdr-y := 0x00008000
+ zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
else
- zreladdr-y := 0x10008000
+ zreladdr-y += 0x10008000
params_phys-y := 0x10000100
initrd_phys-y := 0x10800000
endif
- zreladdr-$(CONFIG_ARCH_H720X) := 0x40008000
+ zreladdr-$(CONFIG_ARCH_H720X) += 0x40008000
-zreladdr-$(CONFIG_ARCH_MX1) := 0x08008000
+zreladdr-$(CONFIG_ARCH_MX1) += 0x08008000
params_phys-$(CONFIG_ARCH_MX1) := 0x08000100
initrd_phys-$(CONFIG_ARCH_MX1) := 0x08800000
-zreladdr-$(CONFIG_MACH_MX21) := 0xC0008000
+zreladdr-$(CONFIG_MACH_MX21) += 0xC0008000
params_phys-$(CONFIG_MACH_MX21) := 0xC0000100
initrd_phys-$(CONFIG_MACH_MX21) := 0xC0800000
-zreladdr-$(CONFIG_ARCH_MX25) := 0x80008000
+zreladdr-$(CONFIG_ARCH_MX25) += 0x80008000
params_phys-$(CONFIG_ARCH_MX25) := 0x80000100
initrd_phys-$(CONFIG_ARCH_MX25) := 0x80800000
-zreladdr-$(CONFIG_MACH_MX27) := 0xA0008000
+zreladdr-$(CONFIG_MACH_MX27) += 0xA0008000
params_phys-$(CONFIG_MACH_MX27) := 0xA0000100
initrd_phys-$(CONFIG_MACH_MX27) := 0xA0800000
-zreladdr-$(CONFIG_ARCH_MX3) := 0x80008000
+zreladdr-$(CONFIG_ARCH_MX3) += 0x80008000
params_phys-$(CONFIG_ARCH_MX3) := 0x80000100
initrd_phys-$(CONFIG_ARCH_MX3) := 0x80800000
- zreladdr-y := 0x00008000
+ zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
- zreladdr-y := 0x00008000
+ zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
- zreladdr-y := 0xa0008000
+ zreladdr-y += 0xa0008000
params_phys-y := 0xa0000100
initrd_phys-y := 0xa0800000
- zreladdr-y := 0x00008000
+ zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
- zreladdr-y := 0x00008000
+ zreladdr-y += 0x00008000
params_phys-y := 0x00000100
- zreladdr-y := 0x00008000
+ zreladdr-y += 0x00008000
params_phys-y := 0x00000100
- zreladdr-y := 0x00008000
+ zreladdr-y += 0x00008000
params_phys-y := 0x00000100
- zreladdr-y := 0x00008000
+ zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
# PARAMS_PHYS must be within 4MB of ZRELADDR
# INITRD_PHYS must be in RAM
- zreladdr-y := 0x00008000
+ zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
- zreladdr-y := 0x80008000
+ zreladdr-y += 0x80008000
params_phys-y := 0x80000100
initrd_phys-y := 0x82000000
- zreladdr-y := 0x00008000
+ zreladdr-y += 0x00008000
- zreladdr-y := 0x10008000
+ zreladdr-y += 0x10008000
params_phys-y := 0x10000100
initrd_phys-y := 0x10800000
- zreladdr-y := 0x00008000
+ zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
- zreladdr-$(CONFIG_ARCH_MX50) := 0x70008000
+ zreladdr-$(CONFIG_ARCH_MX50) += 0x70008000
params_phys-$(CONFIG_ARCH_MX50) := 0x70000100
initrd_phys-$(CONFIG_ARCH_MX50) := 0x70800000
- zreladdr-$(CONFIG_ARCH_MX51) := 0x90008000
+ zreladdr-$(CONFIG_ARCH_MX51) += 0x90008000
params_phys-$(CONFIG_ARCH_MX51) := 0x90000100
initrd_phys-$(CONFIG_ARCH_MX51) := 0x90800000
- zreladdr-$(CONFIG_ARCH_MX53) := 0x70008000
+ zreladdr-$(CONFIG_ARCH_MX53) += 0x70008000
params_phys-$(CONFIG_ARCH_MX53) := 0x70000100
initrd_phys-$(CONFIG_ARCH_MX53) := 0x70800000
-zreladdr-y := 0x40008000
+zreladdr-y += 0x40008000
- zreladdr-y := 0x80008000
+ zreladdr-y += 0x80008000
- zreladdr-y := 0x00008000
+ zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
-zreladdr-y := 0x00008000
+zreladdr-y += 0x00008000
params_phys-y := 0x00000100
- zreladdr-y := 0x10008000
+ zreladdr-y += 0x10008000
params_phys-y := 0x10000100
initrd_phys-y := 0x10800000
- zreladdr-y := 0x80008000
+ zreladdr-y += 0x80008000
params_phys-y := 0x80000100
initrd_phys-y := 0x80800000
- zreladdr-y := 0x00008000
+ zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
- zreladdr-y := 0x80008000
+ zreladdr-y += 0x80008000
params_phys-y := 0x80000100
initrd_phys-y := 0x80800000
-zreladdr-y := 0x00008000
+zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
- zreladdr-y := 0xa0008000
+ zreladdr-y += 0xa0008000
ifeq ($(CONFIG_REALVIEW_HIGH_PHYS_OFFSET),y)
- zreladdr-y := 0x70008000
+ zreladdr-y += 0x70008000
params_phys-y := 0x70000100
initrd_phys-y := 0x70800000
else
- zreladdr-y := 0x00008000
+ zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
endif
- zreladdr-y := 0x10008000
+ zreladdr-y += 0x10008000
params_phys-y := 0x10000100
initrd_phys-y := 0x18000000
ifeq ($(CONFIG_PM_H1940),y)
- zreladdr-y := 0x30108000
+ zreladdr-y += 0x30108000
params_phys-y := 0x30100100
else
- zreladdr-y := 0x30008000
+ zreladdr-y += 0x30008000
params_phys-y := 0x30000100
endif
- zreladdr-y := 0x50008000
+ zreladdr-y += 0x50008000
params_phys-y := 0x50000100
- zreladdr-y := 0x20008000
+ zreladdr-y += 0x20008000
params_phys-y := 0x20000100
- zreladdr-y := 0x20008000
+ zreladdr-y += 0x20008000
params_phys-y := 0x20000100
- zreladdr-y := 0x20008000
+ zreladdr-y += 0x20008000
params_phys-y := 0x20000100
- zreladdr-y := 0xc0008000
ifeq ($(CONFIG_ARCH_SA1100),y)
- zreladdr-$(CONFIG_SA1111) := 0xc0208000
+ zreladdr-$(CONFIG_SA1111) += 0xc0208000
+else
+ zreladdr-y += 0xc0008000
endif
params_phys-y := 0xc0000100
initrd_phys-y := 0xc0800000
- zreladdr-y := 0x08008000
+ zreladdr-y += 0x08008000
__ZRELADDR := $(shell /bin/bash -c 'printf "0x%08x" \
$$[$(CONFIG_MEMORY_START) + 0x8000]')
- zreladdr-y := $(__ZRELADDR)
+ zreladdr-y += $(__ZRELADDR)
# Unsupported legacy stuff
#
-zreladdr-y := 0x00008000
+zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
-zreladdr-y := 0x00008000
+zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
- zreladdr-y := 0x20008000
+ zreladdr-y += 0x20008000
params_phys-y := 0x20000100
initrd_phys-y := 0x20800000
-zreladdr-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00008000
+zreladdr-$(CONFIG_ARCH_TEGRA_2x_SOC) += 0x00008000
params_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00000100
initrd_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00800000
# INITRD_PHYS must be in RAM
ifdef CONFIG_MACH_U300_SINGLE_RAM
- zreladdr-y := 0x28E08000
+ zreladdr-y += 0x28E08000
params_phys-y := 0x28E00100
else
- zreladdr-y := 0x48008000
+ zreladdr-y += 0x48008000
params_phys-y := 0x48000100
endif
- zreladdr-y := 0x00008000
+ zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
- zreladdr-y := 0x00008000
+ zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
- zreladdr-y := 0x60008000
+ zreladdr-y += 0x60008000
params_phys-y := 0x60000100
initrd_phys-y := 0x60800000
- zreladdr-y := 0x00008000
+ zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x01000000
-zreladdr-y := 0x00008000
+zreladdr-y += 0x00008000
params_phys-y := 0x00000100
- zreladdr-y := 0x00008000
+ zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000