--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
-@@ -587,7 +587,7 @@
+@@ -585,7 +585,7 @@
status = "disabled";
msi-parent = <&msi0>;
compatible = "brcm,iproc-msi";
msi-controller;
interrupt-parent = <&gic>;
-@@ -624,7 +624,7 @@
+@@ -622,7 +622,7 @@
status = "disabled";
msi-parent = <&msi1>;
compatible = "brcm,iproc-msi";
msi-controller;
interrupt-parent = <&gic>;
-@@ -661,7 +661,7 @@
+@@ -659,7 +659,7 @@
status = "disabled";
msi-parent = <&msi2>;
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
-@@ -534,7 +534,7 @@
+@@ -532,7 +532,7 @@
};
};
--- /dev/null
+From 130b5e32ba9d2d2313e39cf3f6d0729bff02b76a Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Wed, 30 Mar 2022 14:05:27 +0200
+Subject: [PATCH] ARM: dts: BCM5301X: Update pin controller node name
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This fixes:
+arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: cru-bus@100: 'pin-controller@1c0' does not match any of the regexes: '^clock-controller@[a-f0-9]+$', '^phy@[a-f0-9]+$', '^pinctrl@[a-f0-9]+$', '^syscon@[a-f0-9]+$', '^thermal@[a-f0-9]+$'
+ From schema: Documentation/devicetree/bindings/mfd/brcm,cru.yaml
+arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pin-controller@1c0: $nodename:0: 'pin-controller@1c0' does not match '^(pinctrl|pinmux)(@[0-9a-f]+)?$'
+ From schema: Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml
+
+Ref: e7391b021e3f ("dt-bindings: mfd: brcm,cru: Rename pinctrl node")
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/bcm5301x.dtsi | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/arm/boot/dts/bcm5301x.dtsi
++++ b/arch/arm/boot/dts/bcm5301x.dtsi
+@@ -455,7 +455,7 @@
+ reg = <0x180 0x4>;
+ };
+
+- pinctrl: pin-controller@1c0 {
++ pinctrl: pinctrl@1c0 {
+ compatible = "brcm,bcm4708-pinmux";
+ reg = <0x1c0 0x24>;
+ reg-names = "cru_gpio_control";
--- /dev/null
+From 90103611d573c5c238350f9b1d7cb682c62f5681 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
+Date: Fri, 1 Apr 2022 13:19:58 +0300
+Subject: [PATCH] ARM: dts: BCM5301X: Fix DTC warning for NAND node
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Remove the unnecessary #address-cells and #size-cells properties on the
+nand@0 node to fix the warning below.
+
+Warning (avoid_unnecessary_addr_size): /nand-controller@18028000/nand@0: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
+
+Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
+Acked-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi | 2 --
+ 1 file changed, 2 deletions(-)
+
+--- a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
++++ b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
+@@ -10,8 +10,6 @@
+ nandcs: nand@0 {
+ compatible = "brcm,nandcs";
+ reg = <0>;
+- #address-cells = <1>;
+- #size-cells = <1>;
+
+ partitions {
+ compatible = "brcm,bcm947xx-cfe-partitions";
--- /dev/null
+From e5ff0a7aab3ef5dd8ec7636b936c95179aa5ddfa Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
+Date: Fri, 1 Apr 2022 13:19:59 +0300
+Subject: [PATCH] ARM: dts: BCM5301X: Remove cell properties from srab ports on
+ Asus RT-AC88U
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Remove #address-cells and #size-cells properties from the ports node of
+&srab. They are already defined on bcm5301x.dtsi, there's no need to define
+them again.
+
+Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
+Acked-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | 5 +----
+ 1 file changed, 1 insertion(+), 4 deletions(-)
+
+--- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
++++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
+@@ -1,6 +1,6 @@
+ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+ /*
+- * Copyright (C) 2021 Arınç ÜNAL <arinc.unal@arinc9.com>
++ * Copyright (C) 2021-2022 Arınç ÜNAL <arinc.unal@arinc9.com>
+ */
+
+ /dts-v1/;
+@@ -177,9 +177,6 @@
+ dsa,member = <0 0>;
+
+ ports {
+- #address-cells = <1>;
+- #size-cells = <0>;
+-
+ port@0 {
+ reg = <0>;
+ label = "lan4";
--- /dev/null
+From 4b7a67420a34ebd8fbf0111221a8bfd8001d418d Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
+Date: Fri, 1 Apr 2022 13:20:00 +0300
+Subject: [PATCH] ARM: dts: BCM5301X: Add rgmii to port@5 of Broadcom switch on
+ Asus RT-AC88U
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Define phy-mode of the Broadcom switch's port@5 as rgmii. This doesn't seem
+to matter but let's explicitly define it since phy-mode as rgmii is defined
+on the other side which is port@6 of the Realtek switch.
+
+Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
++++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
+@@ -205,6 +205,7 @@
+ sw0_p5: port@5 {
+ reg = <5>;
+ label = "extsw";
++ phy-mode = "rgmii";
+
+ fixed-link {
+ speed = <1000>;
--- /dev/null
+From 7f7f8c7b9f3cbae1355fb3b0ce4ea9d6f1552521 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
+Date: Fri, 1 Apr 2022 13:20:01 +0300
+Subject: [PATCH] ARM: dts: BCM5301X: Retrieve gmac1 MAC address from NVRAM on
+ Asus RT-AC88U
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The et1macaddr NVRAM variable contains a MAC address for gmac1 on Asus
+RT-AC88U. Add NVMEM cell for it and reference it in the gmac1 node.
+
+Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
+Acked-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | 8 ++++++++
+ 1 file changed, 8 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
++++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
+@@ -25,6 +25,9 @@
+ nvram@1c080000 {
+ compatible = "brcm,nvram";
+ reg = <0x1c080000 0x00180000>;
++
++ et1macaddr: et1macaddr {
++ };
+ };
+
+ leds {
+@@ -239,6 +242,11 @@
+ };
+ };
+
++&gmac1 {
++ nvmem-cells = <&et1macaddr>;
++ nvmem-cell-names = "mac-address";
++};
++
+ &usb2 {
+ vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+ };
--- /dev/null
+From 69bb5c6f3f41fe6baa86a775c8a3e69dd27f85d6 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
+Date: Sat, 2 Apr 2022 23:46:21 +0300
+Subject: [PATCH] ARM: dts: BCM5301X: Fix compatible strings for BCM53012 and
+ BCM53016 SoC
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Fix compatible strings for devicetrees using the BCM53012 and BCM53016 SoC.
+
+Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
+Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/bcm53016-meraki-mr32.dts | 2 +-
+ arch/arm/boot/dts/bcm953012er.dts | 2 +-
+ arch/arm/boot/dts/bcm953012hr.dts | 2 +-
+ arch/arm/boot/dts/bcm953012k.dts | 2 +-
+ 4 files changed, 4 insertions(+), 4 deletions(-)
+
+--- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
++++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
+@@ -13,7 +13,7 @@
+ #include <dt-bindings/leds/common.h>
+
+ / {
+- compatible = "meraki,mr32", "brcm,brcm53016", "brcm,bcm4708";
++ compatible = "meraki,mr32", "brcm,bcm53016", "brcm,bcm4708";
+ model = "Meraki MR32";
+
+ chosen {
+--- a/arch/arm/boot/dts/bcm953012er.dts
++++ b/arch/arm/boot/dts/bcm953012er.dts
+@@ -37,7 +37,7 @@
+
+ / {
+ model = "NorthStar Enterprise Router (BCM953012ER)";
+- compatible = "brcm,bcm953012er", "brcm,brcm53012", "brcm,bcm4708";
++ compatible = "brcm,bcm953012er", "brcm,bcm53012", "brcm,bcm4708";
+
+ memory@0 {
+ device_type = "memory";
+--- a/arch/arm/boot/dts/bcm953012hr.dts
++++ b/arch/arm/boot/dts/bcm953012hr.dts
+@@ -37,7 +37,7 @@
+
+ / {
+ model = "NorthStar HR (BCM953012HR)";
+- compatible = "brcm,bcm953012hr", "brcm,brcm53012", "brcm,bcm4708";
++ compatible = "brcm,bcm953012hr", "brcm,bcm53012", "brcm,bcm4708";
+
+ aliases {
+ ethernet0 = &gmac0;
+--- a/arch/arm/boot/dts/bcm953012k.dts
++++ b/arch/arm/boot/dts/bcm953012k.dts
+@@ -36,7 +36,7 @@
+
+ / {
+ model = "NorthStar SVK (BCM953012K)";
+- compatible = "brcm,bcm953012k", "brcm,brcm53012", "brcm,bcm4708";
++ compatible = "brcm,bcm953012k", "brcm,bcm53012", "brcm,bcm4708";
+
+ aliases {
+ serial0 = &uart0;
--- /dev/null
+From b9cff8783439ff1803709128af3a0e04c5f5f047 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
+Date: Sun, 10 Apr 2022 12:44:55 +0300
+Subject: [PATCH] ARM: dts: BCM5301X: Disable gmac0 and enable port@8 on Asus
+ RT-AC88U
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Disable gmac0 which is not connected to any switch MAC. Enable port@8 of
+the Broadcom switch which is connected to gmac2.
+
+Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | 5 ++++-
+ 1 file changed, 4 insertions(+), 1 deletion(-)
+
+--- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
++++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
+@@ -232,7 +232,6 @@
+ reg = <8>;
+ ethernet = <&gmac2>;
+ label = "cpu";
+- status = "disabled";
+
+ fixed-link {
+ speed = <1000>;
+@@ -242,6 +241,10 @@
+ };
+ };
+
++&gmac0 {
++ status = "disabled";
++};
++
+ &gmac1 {
+ nvmem-cells = <&et1macaddr>;
+ nvmem-cell-names = "mac-address";
--- /dev/null
+From 417aea4436bb658d8c5c4dcd0e3c255931d0ee96 Mon Sep 17 00:00:00 2001
+From: SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com>
+Date: Fri, 22 Apr 2022 00:10:54 +0900
+Subject: [PATCH] ARM: dts: BCM5301X: Add DT for WZR-1166DHP,DHP2
+
+Buffalo WZR-1166DHP/WZR-1166DHP2 wireless router with
+
+ - BCM4708A0
+ - 128MiB NAND flash
+ - 2T2R 11ac/a/b/g/n Wi-Fi
+ - 4x 10/100/1000M ethernet switch
+ - 1x USB 3.0 port
+
+ WZR-1166DHP and WZR-1166DHP2 have different memory capacity.
+
+ WZR-1166DHP
+ - 512 MiB DDR2 SDRAM
+
+ WZR-1166DHP2
+ - 256 MiB DDR2 SDRAM
+
+ These hardware components are very similar to the WZR-1750DHP
+ except for the number of antennas.
+
+Signed-off-by: SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/Makefile | 2 +
+ .../bcm4708-buffalo-wzr-1166dhp-common.dtsi | 192 ++++++++++++++++++
+ .../boot/dts/bcm4708-buffalo-wzr-1166dhp.dts | 26 +++
+ .../boot/dts/bcm4708-buffalo-wzr-1166dhp2.dts | 26 +++
+ 4 files changed, 246 insertions(+)
+ create mode 100644 arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi
+ create mode 100644 arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp.dts
+ create mode 100644 arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp2.dts
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -89,6 +89,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+ bcm4708-asus-rt-ac56u.dtb \
+ bcm4708-asus-rt-ac68u.dtb \
+ bcm4708-buffalo-wzr-1750dhp.dtb \
++ bcm4708-buffalo-wzr-1166dhp.dtb \
++ bcm4708-buffalo-wzr-1166dhp2.dtb \
+ bcm4708-linksys-ea6300-v1.dtb \
+ bcm4708-linksys-ea6500-v2.dtb \
+ bcm4708-luxul-xap-1510.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi
+@@ -0,0 +1,192 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
++/*
++ * Broadcom BCM470X / BCM5301X ARM platform code.
++ * DTS for Buffalo WZR-1166DHP and WZR-1166DHP2
++ *
++ * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
++ * Copyright (C) 2022 SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com>
++ */
++
++
++#include "bcm4708.dtsi"
++#include "bcm5301x-nand-cs0-bch8.dtsi"
++#include <dt-bindings/leds/common.h>
++
++/ {
++ spi {
++ compatible = "spi-gpio";
++ num-chipselects = <1>;
++ gpio-sck = <&chipcommon 7 0>;
++ gpio-mosi = <&chipcommon 4 0>;
++ cs-gpios = <&chipcommon 6 0>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ hc595: gpio_spi@0 {
++ compatible = "fairchild,74hc595";
++ reg = <0>;
++ registers-number = <1>;
++ spi-max-frequency = <100000>;
++
++ gpio-controller;
++ #gpio-cells = <2>;
++
++ };
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ usb {
++ /* label = "bcm53xx:blue:usb"; */
++ function = LED_FUNCTION_USB;
++ color = <LED_COLOR_ID_BLUE>;
++ gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
++ trigger-sources = <&ohci_port1>, <&ehci_port1>,
++ <&xhci_port1>, <&ohci_port2>,
++ <&ehci_port2>;
++ linux,default-trigger = "usbport";
++ };
++
++ power0 {
++ /* label = "bcm53xx:red:power"; */
++ function = LED_FUNCTION_FAULT;
++ color = <LED_COLOR_ID_RED>;
++ gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
++ };
++
++ power1 {
++ /* label = "bcm53xx:white:power"; */
++ function = LED_FUNCTION_POWER;
++ color = <LED_COLOR_ID_WHITE>;
++ gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
++ linux,default-trigger = "default-on";
++ };
++
++ router0 {
++ /* label = "bcm53xx:blue:router"; */
++ function = LED_FUNCTION_STATUS;
++ color = <LED_COLOR_ID_BLUE>;
++ gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
++ linux,default-trigger = "default-on";
++ };
++
++ router1 {
++ /* label = "bcm53xx:amber:router"; */
++ function = LED_FUNCTION_STATUS;
++ color = <LED_COLOR_ID_AMBER>;
++ gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
++ };
++
++ wan {
++ /* label = "bcm53xx:blue:wan"; */
++ function = LED_FUNCTION_WAN;
++ color = <LED_COLOR_ID_BLUE>;
++ gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
++ linux,default-trigger = "default-on";
++ };
++
++ wireless0 {
++ /* label = "bcm53xx:blue:wireless"; */
++ function = LED_FUNCTION_WLAN;
++ color = <LED_COLOR_ID_BLUE>;
++ gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
++ };
++
++ wireless1 {
++ /* label = "bcm53xx:amber:wireless"; */
++ function = LED_FUNCTION_WLAN;
++ color = <LED_COLOR_ID_AMBER>;
++ gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
++ };
++ };
++
++ gpio-keys {
++ compatible = "gpio-keys";
++
++ restart {
++ label = "Reset";
++ linux,code = <KEY_RESTART>;
++ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
++ };
++
++ aoss {
++ label = "AOSS";
++ linux,code = <KEY_WPS_BUTTON>;
++ gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
++ };
++
++ /* Commit mode set by switch? */
++ mode {
++ label = "Mode";
++ linux,code = <KEY_SETUP>;
++ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
++ };
++
++ /* Switch: AP mode */
++ sw_ap {
++ label = "AP";
++ linux,code = <BTN_0>;
++ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
++ };
++
++ eject {
++ label = "USB eject";
++ linux,code = <KEY_EJECTCD>;
++ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
++ };
++ };
++};
++
++&usb2 {
++ vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
++};
++
++&usb3 {
++ vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>;
++};
++
++&spi_nor {
++ status = "okay";
++};
++
++&usb3_phy {
++ status = "okay";
++};
++
++&srab {
++ status = "okay";
++
++ ports {
++ port@0 {
++ reg = <0>;
++ label = "lan1";
++ };
++
++ port@1 {
++ reg = <1>;
++ label = "lan2";
++ };
++
++ port@2 {
++ reg = <2>;
++ label = "lan3";
++ };
++
++ port@3 {
++ reg = <3>;
++ label = "lan4";
++ };
++
++ port@4 {
++ reg = <4>;
++ label = "wan";
++ };
++
++ port@5 {
++ reg = <5>;
++ label = "cpu";
++ ethernet = <&gmac0>;
++ };
++ };
++};
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp.dts
+@@ -0,0 +1,26 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
++/*
++ * Device Tree Bindigs for Buffalo WZR-1166DHP
++ *
++ * Copyright (C) 2022 SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com>
++ */
++
++/dts-v1/;
++
++#include "bcm4708-buffalo-wzr-1166dhp-common.dtsi"
++
++/ {
++ compatible = "buffalo,wzr-1166dhp", "brcm,bcm4708";
++ model = "Buffalo WZR-1166DHP";
++
++ chosen {
++ bootargs = "console=ttyS0,115200";
++ };
++
++ memory@0 {
++ device_type = "memory";
++ reg = <0x00000000 0x08000000>,
++ <0x88000000 0x18000000>;
++ };
++
++};
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp2.dts
+@@ -0,0 +1,26 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
++/*
++ * Device Tree Bindigs for Buffalo WZR-1166DHP2
++ *
++ * Copyright (C) 2022 SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com>
++ */
++
++/dts-v1/;
++
++#include "bcm4708-buffalo-wzr-1166dhp-common.dtsi"
++
++/ {
++ compatible = "buffalo,wzr-1166dhp2", "brcm,bcm4708";
++ model = "Buffalo WZR-1166DHP2";
++
++ chosen {
++ bootargs = "console=ttyS0,115200";
++ };
++
++ memory@0 {
++ device_type = "memory";
++ reg = <0x00000000 0x08000000>,
++ <0x88000000 0x08000000>;
++ };
++
++};
--- /dev/null
+From 18176b9d82eebaf4408dc0440f54d57a8cbced83 Mon Sep 17 00:00:00 2001
+From: Arnd Bergmann <arnd@arndb.de>
+Date: Fri, 13 May 2022 11:11:07 +0200
+Subject: [PATCH] Revert "ARM: dts: BCM5301X: Fix DTC warning for NAND node"
+
+This reverts commit 90103611d573, which caused a new DTC warning
+
+arch/arm/boot/dts/bcm953012hr.dts:57.3-33: Warning (reg_format): /nand-controller@18028000/nand@0/partition@0:reg: property has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1)
+arch/arm/boot/dts/bcm953012hr.dts:62.3-33: Warning (reg_format): /nand-controller@18028000/nand@0/partition@200000:reg: property has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1)
+arch/arm/boot/dts/bcm953012hr.dts:66.3-33: Warning (reg_format): /nand-controller@18028000/nand@0/partition@600000:reg: property has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1)
+arch/arm/boot/dts/bcm953012hr.dts:70.3-33: Warning (reg_format): /nand-controller@18028000/nand@0/partition@1000000:reg: property has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1)
+arch/arm/boot/dts/bcm953012hr.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format'
+arch/arm/boot/dts/bcm953012hr.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
+arch/arm/boot/dts/bcm953012hr.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
+arch/arm/boot/dts/bcm953012hr.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
+
+Signed-off-by: Arnd Bergmann <arnd@arndb.de>
+---
+ arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
++++ b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
+@@ -10,6 +10,8 @@
+ nandcs: nand@0 {
+ compatible = "brcm,nandcs";
+ reg = <0>;
++ #address-cells = <1>;
++ #size-cells = <1>;
+
+ partitions {
+ compatible = "brcm,bcm947xx-cfe-partitions";
--- /dev/null
+From c5aec5611aec8fb1ca68f68e41acaefccfc93c16 Mon Sep 17 00:00:00 2001
+From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+Date: Thu, 9 Jun 2022 13:39:30 +0200
+Subject: [PATCH] ARM: dts: broadcom: align gpio-key node names with dtschema
+
+The node names should be generic and DT schema expects certain pattern
+(e.g. with key/button/switch).
+
+Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts | 6 +++---
+ arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts | 8 ++++----
+ .../boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi | 10 +++++-----
+ arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 10 +++++-----
+ arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts | 4 ++--
+ arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts | 4 ++--
+ arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 2 +-
+ arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 2 +-
+ arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 6 +++---
+ arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 6 +++---
+ arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 6 +++---
+ arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 4 ++--
+ arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 8 ++++----
+ arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 2 +-
+ arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts | 2 +-
+ arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 2 +-
+ arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts | 4 ++--
+ arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 4 ++--
+ arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 12 ++++++------
+ arch/arm/boot/dts/bcm4709-linksys-ea9200.dts | 4 ++--
+ arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 6 +++---
+ arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 8 ++++----
+ arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 4 ++--
+ arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | 8 ++++----
+ arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 6 +++---
+ arch/arm/boot/dts/bcm47094-linksys-panamera.dts | 6 +++---
+ arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts | 2 +-
+ arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts | 2 +-
+ arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts | 2 +-
+ arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts | 2 +-
+ arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 2 +-
+ arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts | 2 +-
+ arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 8 ++++----
+ arch/arm/boot/dts/bcm47094-phicomm-k3.dts | 2 +-
+ arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts | 2 +-
+ arch/arm/boot/dts/bcm47189-luxul-xap-810.dts | 2 +-
+ arch/arm/boot/dts/bcm47189-tenda-ac9.dts | 6 +++---
+ arch/arm/boot/dts/bcm53016-meraki-mr32.dts | 2 +-
+ arch/arm/boot/dts/bcm911360_entphn.dts | 4 ++--
+ arch/arm/boot/dts/bcm947189acdbmr.dts | 4 ++--
+ arch/arm/boot/dts/bcm953012er.dts | 4 ++--
+ arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi | 2 +-
+ arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi | 2 +-
+ 43 files changed, 97 insertions(+), 97 deletions(-)
+
+--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
++++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
+@@ -70,19 +70,19 @@
+ gpio-keys {
+ compatible = "gpio-keys";
+
+- rfkill {
++ button-rfkill {
+ label = "WiFi";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+ };
+
+- restart {
++ button-restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+ };
+
+- wps {
++ button-wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
++++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
+@@ -54,25 +54,25 @@
+ gpio-keys {
+ compatible = "gpio-keys";
+
+- brightness {
++ button-brightness {
+ label = "Backlight";
+ linux,code = <KEY_BRIGHTNESS_ZERO>;
+ gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+ };
+
+- wps {
++ button-wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+ };
+
+- restart {
++ button-restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+ };
+
+- rfkill {
++ button-rfkill {
+ label = "WiFi";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi
++++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi
+@@ -104,33 +104,33 @@
+ gpio-keys {
+ compatible = "gpio-keys";
+
+- restart {
++ button-restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+ };
+
+- aoss {
++ button-aoss {
+ label = "AOSS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
+ };
+
+ /* Commit mode set by switch? */
+- mode {
++ button-mode {
+ label = "Mode";
+ linux,code = <KEY_SETUP>;
+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+ };
+
+ /* Switch: AP mode */
+- sw_ap {
++ button-sw-ap {
+ label = "AP";
+ linux,code = <BTN_0>;
+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+ };
+
+- eject {
++ button-eject {
+ label = "USB eject";
+ linux,code = <KEY_EJECTCD>;
+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
++++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+@@ -100,33 +100,33 @@
+ gpio-keys {
+ compatible = "gpio-keys";
+
+- restart {
++ button-restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+ };
+
+- aoss {
++ button-aoss {
+ label = "AOSS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
+ };
+
+ /* Commit mode set by switch? */
+- mode {
++ button-mode {
+ label = "Mode";
+ linux,code = <KEY_SETUP>;
+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+ };
+
+ /* Switch: AP mode */
+- sw_ap {
++ button-sw-ap {
+ label = "AP";
+ linux,code = <BTN_0>;
+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+ };
+
+- eject {
++ button-eject {
+ label = "USB eject";
+ linux,code = <KEY_EJECTCD>;
+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+--- a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
++++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
+@@ -29,13 +29,13 @@
+ gpio-keys {
+ compatible = "gpio-keys";
+
+- wps {
++ button-wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+ };
+
+- restart {
++ button-restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+--- a/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
++++ b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
+@@ -25,13 +25,13 @@
+ gpio-keys {
+ compatible = "gpio-keys";
+
+- wps {
++ button-wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+ };
+
+- restart {
++ button-restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+--- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
++++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
+@@ -45,7 +45,7 @@
+ gpio-keys {
+ compatible = "gpio-keys";
+
+- restart {
++ button-restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
++++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
+@@ -52,7 +52,7 @@
+ gpio-keys {
+ compatible = "gpio-keys";
+
+- restart {
++ button-restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
++++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+@@ -63,19 +63,19 @@
+ gpio-keys {
+ compatible = "gpio-keys";
+
+- wps {
++ button-wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+ };
+
+- rfkill {
++ button-rfkill {
+ label = "WiFi";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+ };
+
+- restart {
++ button-restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+--- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
++++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
+@@ -59,19 +59,19 @@
+ gpio-keys {
+ compatible = "gpio-keys";
+
+- wps {
++ button-wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+ };
+
+- rfkill {
++ button-rfkill {
+ label = "WiFi";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+ };
+
+- restart {
++ button-restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
++++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+@@ -94,19 +94,19 @@
+ gpio-keys {
+ compatible = "gpio-keys";
+
+- rfkill {
++ button-rfkill {
+ label = "WiFi";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+ };
+
+- wps {
++ button-wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+ };
+
+- restart {
++ button-restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+--- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
++++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
+@@ -60,13 +60,13 @@
+ gpio-keys {
+ compatible = "gpio-keys";
+
+- restart {
++ button-restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+ };
+
+- wps {
++ button-wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
++++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+@@ -91,26 +91,26 @@
+ gpio-keys {
+ compatible = "gpio-keys";
+
+- aoss {
++ button-aoss {
+ label = "AOSS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
+ };
+
+- restart {
++ button-restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+ };
+
+ /* Switch device mode? */
+- mode {
++ button-mode {
+ label = "Mode";
+ linux,code = <KEY_SETUP>;
+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+ };
+
+- eject {
++ button-eject {
+ label = "USB eject";
+ linux,code = <KEY_EJECTCD>;
+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
++++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+@@ -96,7 +96,7 @@
+ gpio-keys {
+ compatible = "gpio-keys";
+
+- restart {
++ button-restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+--- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
++++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
+@@ -45,7 +45,7 @@
+ gpio-keys {
+ compatible = "gpio-keys";
+
+- restart {
++ button-restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+--- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
++++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
+@@ -94,7 +94,7 @@
+ gpio-keys {
+ compatible = "gpio-keys";
+
+- restart {
++ button-restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+--- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
++++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
+@@ -77,13 +77,13 @@
+ gpio-keys {
+ compatible = "gpio-keys";
+
+- rfkill {
++ button-rfkill {
+ label = "WiFi";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+ };
+
+- restart {
++ button-restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
++++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+@@ -50,13 +50,13 @@
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+- wps {
++ button-wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+ };
+
+- restart {
++ button-restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
++++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+@@ -80,39 +80,39 @@
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+- power {
++ button-power {
+ label = "Power";
+ linux,code = <KEY_POWER>;
+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+ };
+
+- restart {
++ button-restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+ };
+
+- aoss {
++ button-aoss {
+ label = "AOSS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
+ };
+
+ /* Commit mode set by switch? */
+- mode {
++ button-mode {
+ label = "Mode";
+ linux,code = <KEY_SETUP>;
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+ };
+
+ /* Switch: AP mode */
+- sw_ap {
++ button-sw-ap {
+ label = "AP";
+ linux,code = <BTN_0>;
+ gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+ };
+
+- eject {
++ button-eject {
+ label = "USB eject";
+ linux,code = <KEY_EJECTCD>;
+ gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+--- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
++++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
+@@ -32,13 +32,13 @@
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+- wps {
++ button-wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+ };
+
+- restart {
++ button-restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
++++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+@@ -75,19 +75,19 @@
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+- wps {
++ button-wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+ };
+
+- rfkill {
++ button-rfkill {
+ label = "WiFi";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+ };
+
+- restart {
++ button-restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
++++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+@@ -102,25 +102,25 @@
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+- rfkill {
++ button-rfkill {
+ label = "WiFi";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+ };
+
+- wps {
++ button-wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+ };
+
+- restart {
++ button-restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+ };
+
+- brightness {
++ button-brightness {
+ label = "Backlight";
+ linux,code = <KEY_BRIGHTNESS_ZERO>;
+ gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
+--- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
++++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
+@@ -80,13 +80,13 @@
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+- wps {
++ button-wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+ };
+
+- restart {
++ button-restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+--- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
++++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
+@@ -72,25 +72,25 @@
+ gpio-keys {
+ compatible = "gpio-keys";
+
+- wps {
++ button-wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+ };
+
+- reset {
++ button-reset {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+ };
+
+- wifi {
++ button-wifi {
+ label = "Wi-Fi";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+ };
+
+- led {
++ button-led {
+ label = "Backlight";
+ linux,code = <KEY_BRIGHTNESS_ZERO>;
+ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
++++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+@@ -86,20 +86,20 @@
+ gpio-keys {
+ compatible = "gpio-keys";
+
+- wps {
++ button-wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+ };
+
+ /* Switch: router / extender */
+- extender {
++ button-extender {
+ label = "Extender";
+ linux,code = <BTN_0>;
+ gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+ };
+
+- restart {
++ button-restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+--- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
++++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
+@@ -30,19 +30,19 @@
+ gpio-keys {
+ compatible = "gpio-keys";
+
+- wps {
++ button-wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+ };
+
+- rfkill {
++ button-rfkill {
+ label = "WiFi";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
+ };
+
+- reset {
++ button-reset {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+--- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
++++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
+@@ -49,7 +49,7 @@
+ gpio-keys {
+ compatible = "gpio-keys";
+
+- restart {
++ button-restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+--- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
++++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
+@@ -43,7 +43,7 @@
+ gpio-keys {
+ compatible = "gpio-keys";
+
+- restart {
++ button-restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+--- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
++++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
+@@ -49,7 +49,7 @@
+ gpio-keys {
+ compatible = "gpio-keys";
+
+- restart {
++ button-restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+--- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
++++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
+@@ -37,7 +37,7 @@
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+- restart {
++ button-restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
+--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
++++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
+@@ -89,7 +89,7 @@
+ gpio-keys {
+ compatible = "gpio-keys";
+
+- restart {
++ button-restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
++++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
+@@ -67,7 +67,7 @@
+ gpio-keys {
+ compatible = "gpio-keys";
+
+- restart {
++ button-restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+--- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
++++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
+@@ -65,25 +65,25 @@
+ gpio-keys {
+ compatible = "gpio-keys";
+
+- brightness {
++ button-brightness {
+ label = "Backlight";
+ linux,code = <KEY_BRIGHTNESS_ZERO>;
+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+ };
+
+- restart {
++ button-restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+ };
+
+- wps {
++ button-wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+ };
+
+- rfkill {
++ button-rfkill {
+ label = "WiFi";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+--- a/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
++++ b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
+@@ -22,7 +22,7 @@
+ gpio-keys {
+ compatible = "gpio-keys";
+
+- restart {
++ button-restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+--- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
++++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
+@@ -39,7 +39,7 @@
+ gpio-keys {
+ compatible = "gpio-keys";
+
+- restart {
++ button-restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+--- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
++++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
+@@ -49,7 +49,7 @@
+ gpio-keys {
+ compatible = "gpio-keys";
+
+- restart {
++ button-restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+--- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
++++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
+@@ -59,19 +59,19 @@
+ gpio-keys {
+ compatible = "gpio-keys";
+
+- rfkill {
++ button-rfkill {
+ label = "WiFi";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+ };
+
+- restart {
++ button-restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+ };
+
+- wps {
++ button-wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
+--- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
++++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
+@@ -50,7 +50,7 @@
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+- restart {
++ button-restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;
+--- a/arch/arm/boot/dts/bcm911360_entphn.dts
++++ b/arch/arm/boot/dts/bcm911360_entphn.dts
+@@ -47,10 +47,10 @@
+ stdout-path = "serial0:115200n8";
+ };
+
+- gpio_keys {
++ gpio-keys {
+ compatible = "gpio-keys";
+
+- hook {
++ button-hook {
+ label = "HOOK";
+ linux,code = <KEY_O>;
+ gpios = <&gpio_asiu 48 0>;
+--- a/arch/arm/boot/dts/bcm947189acdbmr.dts
++++ b/arch/arm/boot/dts/bcm947189acdbmr.dts
+@@ -44,13 +44,13 @@
+ gpio-keys {
+ compatible = "gpio-keys";
+
+- restart {
++ button-restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+ };
+
+- wps {
++ button-wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
+--- a/arch/arm/boot/dts/bcm953012er.dts
++++ b/arch/arm/boot/dts/bcm953012er.dts
+@@ -47,13 +47,13 @@
+ gpio-keys {
+ compatible = "gpio-keys";
+
+- wps {
++ button-wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+ };
+
+- restart {
++ button-restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+--- a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
++++ b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
+@@ -13,7 +13,7 @@
+ autorepeat;
+ poll-interval = <20>;
+
+- reset {
++ button-reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpioa 8 GPIO_ACTIVE_LOW>;
+--- a/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
++++ b/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
+@@ -14,7 +14,7 @@
+ autorepeat;
+ poll-interval = <20>;
+
+- reset {
++ button-reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpioa 6 GPIO_ACTIVE_LOW>;
--- /dev/null
+From d634a6969c03803a945fdc2bccbe7d813420e569 Mon Sep 17 00:00:00 2001
+From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+Date: Thu, 9 Jun 2022 13:39:31 +0200
+Subject: [PATCH] ARM: dts: broadcom: correct gpio-keys properties
+
+gpio-keys children do not use unit addresses.
+
+Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 2 --
+ arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 2 --
+ arch/arm/boot/dts/bcm4709-linksys-ea9200.dts | 2 --
+ arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 2 --
+ arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 2 --
+ arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 2 --
+ arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts | 2 --
+ arch/arm/boot/dts/bcm53016-meraki-mr32.dts | 2 --
+ 8 files changed, 16 deletions(-)
+
+--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
++++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+@@ -47,8 +47,6 @@
+
+ gpio-keys {
+ compatible = "gpio-keys";
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+ button-wps {
+ label = "WPS";
+--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
++++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+@@ -77,8 +77,6 @@
+
+ gpio-keys {
+ compatible = "gpio-keys";
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+ button-power {
+ label = "Power";
+--- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
++++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
+@@ -29,8 +29,6 @@
+
+ gpio-keys {
+ compatible = "gpio-keys";
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+ button-wps {
+ label = "WPS";
+--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
++++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+@@ -72,8 +72,6 @@
+
+ gpio-keys {
+ compatible = "gpio-keys";
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+ button-wps {
+ label = "WPS";
+--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
++++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+@@ -99,8 +99,6 @@
+
+ gpio-keys {
+ compatible = "gpio-keys";
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+ button-rfkill {
+ label = "WiFi";
+--- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
++++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
+@@ -77,8 +77,6 @@
+
+ gpio-keys {
+ compatible = "gpio-keys";
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+ button-wps {
+ label = "WPS";
+--- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
++++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
+@@ -34,8 +34,6 @@
+
+ gpio-keys {
+ compatible = "gpio-keys";
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+ button-restart {
+ label = "Reset";
+--- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
++++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
+@@ -47,8 +47,6 @@
+
+ keys {
+ compatible = "gpio-keys";
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+ button-restart {
+ label = "Reset";
--- /dev/null
+From c8ee9f119bfb4244f76c9971c341ec06b49332cd Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Tue, 8 Nov 2022 12:07:08 +0100
+Subject: [PATCH] ARM: dts: BCM5301X: Correct description of TP-Link partitions
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+TP-Link routers have flash space partitioned according to the partitions
+table. It may look like fixed partitioning but those partitions can be
+actually reorganized. New can be added (or some removed), offsets and
+sizes may change.
+
+Fix DT to use binding for the TP-Link SafeLoader partitioning method.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Link: https://lore.kernel.org/r/20221108110708.13693-1-zajec5@gmail.com
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ .../boot/dts/bcm47081-tplink-archer-c5-v2.dts | 25 ++++---------------
+ .../boot/dts/bcm4709-tplink-archer-c9-v1.dts | 25 ++++---------------
+ 2 files changed, 10 insertions(+), 40 deletions(-)
+
+--- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
++++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
+@@ -95,30 +95,15 @@
+ status = "okay";
+
+ partitions {
+- compatible = "fixed-partitions";
+- #address-cells = <1>;
+- #size-cells = <1>;
++ compatible = "tplink,safeloader-partitions";
++ partitions-table-offset = <0xe50000>;
+
+- boot@0 {
+- label = "boot";
+- reg = <0x000000 0x040000>;
+- read-only;
+- };
+-
+- os-image@100000 {
+- label = "os-image";
+- reg = <0x040000 0x200000>;
++ partition-os-image {
+ compatible = "brcm,trx";
+ };
+
+- rootfs@240000 {
+- label = "rootfs";
+- reg = <0x240000 0xc00000>;
+- };
+-
+- nvram@ff0000 {
+- label = "nvram";
+- reg = <0xff0000 0x010000>;
++ partition-file-system {
++ linux,rootfs;
+ };
+ };
+ };
+--- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
++++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
+@@ -104,30 +104,15 @@
+ status = "okay";
+
+ partitions {
+- compatible = "fixed-partitions";
+- #address-cells = <1>;
+- #size-cells = <1>;
++ compatible = "tplink,safeloader-partitions";
++ partitions-table-offset = <0xe50000>;
+
+- boot@0 {
+- label = "boot";
+- reg = <0x000000 0x040000>;
+- read-only;
+- };
+-
+- os-image@100000 {
+- label = "os-image";
+- reg = <0x040000 0x200000>;
++ partition-os-image {
+ compatible = "brcm,trx";
+ };
+
+- rootfs@240000 {
+- label = "rootfs";
+- reg = <0x240000 0xc00000>;
+- };
+-
+- nvram@ff0000 {
+- label = "nvram";
+- reg = <0xff0000 0x010000>;
++ partition-file-system {
++ linux,rootfs;
+ };
+ };
+ };
--- /dev/null
+From b1ba87897ceda8e49a47aa92832dd7bff8583e21 Mon Sep 17 00:00:00 2001
+From: Linus Walleij <linus.walleij@linaro.org>
+Date: Mon, 7 Nov 2022 14:41:04 +0100
+Subject: [PATCH] ARM: dts: bcm47094: Add devicetree for D-Link DIR-890L
+
+This adds a device tree for the D-Link DIR-890L. This device
+is very similar to D-Link DIR-885L, the differences are detailed
+as a comment in the DTS file.
+
+Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
+Link: https://lore.kernel.org/r/20221107134104.1422169-2-linus.walleij@linaro.org
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/Makefile | 1 +
+ arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts | 211 ++++++++++++++++++
+ 2 files changed, 212 insertions(+)
+ create mode 100644 arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -112,6 +112,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+ bcm4709-tplink-archer-c9-v1.dtb \
+ bcm47094-asus-rt-ac88u.dtb \
+ bcm47094-dlink-dir-885l.dtb \
++ bcm47094-dlink-dir-890l.dtb \
+ bcm47094-linksys-panamera.dtb \
+ bcm47094-luxul-abr-4500.dtb \
+ bcm47094-luxul-xap-1610.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
+@@ -0,0 +1,211 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
++/*
++ * Device tree for D-Link DIR-890L
++ * D-Link calls this board "WRGAC36"
++ * this router has the same looks and form factor as D-Link DIR-885L.
++ *
++ * Some differences from DIR-885L include a separate USB2 port, separate LEDs
++ * for USB2 and USB3, a separate VCC supply for the USB2 slot and no
++ * router/extender switch is mounted (there is an empty mount point on the
++ * PCB) so this device is a pure router. Also the LAN ports are in the right
++ * order.
++ *
++ * Based on the device tree for DIR-885L
++ * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
++ * Copyright (C) 2022 Linus Walleij
++ */
++
++/dts-v1/;
++
++#include "bcm47094.dtsi"
++#include "bcm5301x-nand-cs0-bch1.dtsi"
++
++/ {
++ compatible = "dlink,dir-890l", "brcm,bcm47094", "brcm,bcm4708";
++ model = "D-Link DIR-890L";
++
++ chosen {
++ bootargs = "console=ttyS0,115200 earlycon";
++ };
++
++ memory@0 {
++ device_type = "memory";
++ reg = <0x00000000 0x08000000>,
++ <0x88000000 0x08000000>;
++ };
++
++ leds {
++ /*
++ * LED information is derived from the boot log which
++ * conveniently lists all the LEDs.
++ */
++ compatible = "gpio-leds";
++
++ power-white {
++ label = "bcm53xx:white:power";
++ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "default-on";
++ };
++
++ wan-white {
++ label = "bcm53xx:white:wan";
++ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
++ };
++
++ power-amber {
++ label = "bcm53xx:amber:power";
++ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
++ };
++
++ wan-amber {
++ label = "bcm53xx:amber:wan";
++ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
++ };
++
++ usb3-white {
++ label = "bcm53xx:white:usb3";
++ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
++ trigger-sources = <&xhci_port1>;
++ linux,default-trigger = "usbport";
++ };
++
++ usb2-white {
++ label = "bcm53xx:white:usb2";
++ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
++ trigger-sources = <&ohci_port1>, <&ehci_port1>;
++ linux,default-trigger = "usbport";
++ };
++
++ 2ghz {
++ label = "bcm53xx:white:2ghz";
++ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
++ };
++
++ 5ghz {
++ label = "bcm53xx:white:5ghz";
++ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
++ };
++ };
++
++ gpio-keys {
++ compatible = "gpio-keys";
++
++ button-wps {
++ label = "WPS";
++ linux,code = <KEY_WPS_BUTTON>;
++ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
++ };
++
++ /* Called "factory reset" in the vendor dmesg */
++ button-restart {
++ label = "Reset";
++ linux,code = <KEY_RESTART>;
++ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
++ };
++ };
++
++ /*
++ * The flash memory is memory mapped at 0x1e000000-0x1fffffff
++ * 64KB blocks; total size 2MB, same that can be
++ * found attached to the spi_nor SPI controller.
++ */
++ nvram@1e1f0000 {
++ compatible = "brcm,nvram";
++ reg = <0x1e1f0000 0x00010000>;
++
++ et0macaddr: et0macaddr {
++ };
++ };
++};
++
++&gmac2 {
++ /*
++ * The NVRAM curiously does not contain a MAC address
++ * for et2 so since that is the only ethernet interface
++ * actually in use on the platform, we use this et0 MAC
++ * address for et2.
++ */
++ nvmem-cells = <&et0macaddr>;
++ nvmem-cell-names = "mac-address";
++};
++
++&spi_nor {
++ status = "okay";
++};
++
++&nandcs {
++ /* Spansion S34ML01G2, 128MB with 128KB erase blocks */
++ partitions {
++ compatible = "fixed-partitions";
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ /*
++ * This is called "nflash" in the vendor kernel with
++ * "upgrade" and "rootfs" (probably using OpenWrt
++ * splitpart). We call it "firmware" like standard tools
++ * assume. The CFE loader contains incorrect information
++ * about TRX partitions, ignore this, there are no TRX
++ * partitions: this device uses SEAMA.
++ */
++ firmware@0 {
++ label = "firmware";
++ reg = <0x00000000 0x08000000>;
++ };
++ };
++};
++
++&usb2 {
++ vcc-gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>;
++};
++
++&usb3 {
++ vcc-gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
++};
++
++&usb3_phy {
++ status = "okay";
++};
++
++&srab {
++ status = "okay";
++
++ ports {
++ port@0 {
++ reg = <0>;
++ label = "lan1";
++ };
++
++ port@1 {
++ reg = <1>;
++ label = "lan2";
++ };
++
++ port@2 {
++ reg = <2>;
++ label = "lan3";
++ };
++
++ port@3 {
++ reg = <3>;
++ label = "lan4";
++ };
++
++ port@4 {
++ reg = <4>;
++ label = "wan";
++ };
++
++ port@8 {
++ reg = <8>;
++ label = "cpu";
++ ethernet = <&gmac2>;
++ phy-mode = "rgmii";
++
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ };
++ };
++ };
++};
--- /dev/null
+From 9f66e1dd82e3186aee95282657512ca2aef1afe0 Mon Sep 17 00:00:00 2001
+From: Linus Walleij <linus.walleij@linaro.org>
+Date: Wed, 19 Oct 2022 21:34:49 +0200
+Subject: [PATCH] ARM: dts: bcm53016: Add devicetree for D-Link DWL-8610AP
+
+This adds a device tree for the BCM53016-based D-Link DWL-8610AP
+access point wireless router.
+
+The TRX-format partitions had to be named "firmware" due to
+an OpenWrt patch that only accepts parting such nodes if they
+are named "firmware".
+
+Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
+Link: https://lore.kernel.org/r/20221019193449.3036010-2-linus.walleij@linaro.org
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/Makefile | 1 +
+ .../boot/dts/bcm53016-dlink-dwl-8610ap.dts | 131 ++++++++++++++++++
+ 2 files changed, 132 insertions(+)
+ create mode 100644 arch/arm/boot/dts/bcm53016-dlink-dwl-8610ap.dts
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -122,6 +122,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+ bcm47094-luxul-xwr-3150-v1.dtb \
+ bcm47094-netgear-r8500.dtb \
+ bcm47094-phicomm-k3.dtb \
++ bcm53016-dlink-dwl-8610ap.dtb \
+ bcm53016-meraki-mr32.dtb \
+ bcm94708.dtb \
+ bcm94709.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm53016-dlink-dwl-8610ap.dts
+@@ -0,0 +1,131 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
++/dts-v1/;
++
++#include "bcm4709.dtsi"
++#include "bcm5301x-nand-cs0-bch8.dtsi"
++#include <dt-bindings/leds/common.h>
++#include <dt-bindings/input/input.h>
++
++/ {
++ model = "D-Link DWL-8610AP";
++ compatible = "dlink,dwl-8610ap", "brcm,bcm53016", "brcm,bcm4708";
++
++ memory@0 {
++ device_type = "memory";
++ /* 512 MB RAM in 2 x Macronix D9PSH chips */
++ reg = <0x00000000 0x08000000>,
++ <0x88000000 0x08000000>;
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ power {
++ function = LED_FUNCTION_POWER;
++ color = <LED_COLOR_ID_GREEN>;
++ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
++ default-state = "on";
++ };
++
++ diag {
++ /* Actually "diag" unclear what this means */
++ function = LED_FUNCTION_INDICATOR;
++ color = <LED_COLOR_ID_RED>;
++ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
++ default-state = "on";
++ linux,default-trigger = "heartbeat";
++ };
++
++ wlan-2g {
++ function = LED_FUNCTION_WLAN;
++ color = <LED_COLOR_ID_GREEN>;
++ gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
++ };
++
++ wlan-5g {
++ function = LED_FUNCTION_WLAN;
++ color = <LED_COLOR_ID_GREEN>;
++ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
++ };
++ };
++
++ gpio_keys {
++ compatible = "gpio-keys";
++
++ button-reset {
++ debounce-interval = <100>;
++ wakeup-source;
++ linux,code = <KEY_RESTART>;
++ label = "reset";
++ /* This GPIO is actually stored in NVRAM, but it's not gonna change */
++ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
++ };
++ };
++
++ /*
++ * Flash memory at 0x1e000000-0x1fffffff
++ * Macronix 32 64KB blocks; total size 2MB, same that can be
++ * found attached to the spi_nor SPI controller.
++ */
++ nvram@1e080000 {
++ compatible = "brcm,nvram";
++ reg = <0x1e080000 0x00020000>;
++
++ et0macaddr: et0macaddr {
++ };
++
++ et1macaddr: et1macaddr {
++ };
++ };
++};
++
++&gmac0 {
++ nvmem-cells = <&et0macaddr>;
++ nvmem-cell-names = "mac-address";
++};
++
++&gmac1 {
++ nvmem-cells = <&et1macaddr>;
++ nvmem-cell-names = "mac-address";
++};
++
++&spi_nor {
++ /* Serial SPI NOR Flash MX 25L1606E */
++ status = "okay";
++};
++
++&nandcs {
++ /*
++ * Spansion S34ML01G100TFI00 128 MB NAND Flash memory
++ *
++ * This ECC is a bit unorthodox but it is what the stock firmware
++ * is using, so to be able to mount the original partitions
++ * this is necessary.
++ */
++ nand-ecc-strength = <5>;
++ partitions {
++ compatible = "fixed-partitions";
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ /* This is named nflash1.trx in CFE */
++ trx@0 {
++ label = "firmware";
++ reg = <0x00000000 0x02800000>;
++ compatible = "brcm,trx";
++ };
++
++ /* This is named nflash1.trx2 in CFE */
++ trx2@2800000 {
++ label = "firmware2";
++ reg = <0x02800000 0x02800000>;
++ compatible = "brcm,trx";
++ };
++
++ /* This is named nflash1.rwfs in CFE */
++ free@5000000 {
++ label = "free";
++ reg = <0x05000000 0x03000000>;
++ };
++ };
++};
+};
--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-@@ -68,6 +68,38 @@
+@@ -66,6 +66,38 @@
status = "okay";
};
compatible = "fixed-partitions";
--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-@@ -132,3 +132,40 @@
+@@ -130,3 +130,40 @@
&usb3_phy {
status = "okay";
};
+};
--- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
+++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
-@@ -49,3 +49,45 @@
+@@ -47,3 +47,45 @@
&usb3_phy {
status = "okay";
};
+};
--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-@@ -106,3 +106,40 @@
+@@ -104,3 +104,40 @@
&usb3_phy {
status = "okay";
};
&nandcs {
partitions {
compatible = "fixed-partitions";
+--- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
++++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
+@@ -91,6 +91,43 @@
+ };
+ };
+
++&srab {
++ status = "okay";
++
++ ports {
++ port@0 {
++ reg = <0>;
++ label = "wan";
++ };
++
++ port@1 {
++ reg = <1>;
++ label = "lan1";
++ };
++
++ port@2 {
++ reg = <2>;
++ label = "lan2";
++ };
++
++ port@3 {
++ reg = <3>;
++ label = "lan3";
++ };
++
++ port@4 {
++ reg = <4>;
++ label = "lan4";
++ };
++
++ port@5 {
++ reg = <5>;
++ label = "cpu";
++ ethernet = <&gmac0>;
++ };
++ };
++};
++
+ &spi_nor {
+ status = "okay";
+
+--- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
++++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
+@@ -100,6 +100,43 @@
+ vcc-gpio = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+ };
+
++&srab {
++ status = "okay";
++
++ ports {
++ port@0 {
++ reg = <0>;
++ label = "wan";
++ };
++
++ port@1 {
++ reg = <1>;
++ label = "lan1";
++ };
++
++ port@2 {
++ reg = <2>;
++ label = "lan2";
++ };
++
++ port@3 {
++ reg = <3>;
++ label = "lan3";
++ };
++
++ port@4 {
++ reg = <4>;
++ label = "lan4";
++ };
++
++ port@5 {
++ reg = <5>;
++ label = "cpu";
++ ethernet = <&gmac0>;
++ };
++ };
++};
++
+ &spi_nor {
+ status = "okay";
+
+--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
++++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+@@ -107,3 +107,41 @@
+ &usb3_phy {
+ status = "okay";
+ };
++
++&srab {
++ status = "okay";
++
++ ports {
++ port@0 {
++ reg = <0>;
++ label = "lan1";
++ };
++
++ port@1 {
++ reg = <1>;
++ label = "lan2";
++ };
++
++ port@2 {
++ reg = <2>;
++ label = "lan3";
++ };
++
++ port@3 {
++ reg = <3>;
++ label = "lan4";
++ };
++
++ port@4 {
++ reg = <4>;
++ label = "wan";
++ };
++
++ port@5 {
++ reg = <5>;
++ label = "cpu";
++ ethernet = <&gmac0>;
++ };
++ };
++};
++
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
-@@ -106,6 +106,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+@@ -108,6 +108,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm4709-buffalo-wxr-1900dhp.dtb \
bcm4709-linksys-ea9200.dtb \
bcm4709-netgear-r7000.dtb \
gpio-keys {
compatible = "gpio-keys";
-+ power {
++ button-power {
+ label = "Power";
+ linux,code = <KEY_POWER>;
+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+ };
+
- restart {
+ button-restart {
label = "Reset";
linux,code = <KEY_RESTART>;
};
leds {
-@@ -68,7 +69,7 @@
+@@ -66,7 +67,7 @@
max-brightness = <255>;
};
projects / openwrt / staging / hauke.git / commitdiff