-LINUX_VERSION-6.6 = .71
-LINUX_KERNEL_HASH-6.6.71 = 219715ba2dcfa6539fba09ad3f9212772f3507189eb60d77f8e89b06c32e724e
+LINUX_VERSION-6.6 = .72
+LINUX_KERNEL_HASH-6.6.72 = feb9e514930d5968daa0b8b5486d3295d1fb2b34accf876207641884d4baef39
--- a/drivers/thermal/thermal_of.c
+++ b/drivers/thermal/thermal_of.c
-@@ -245,7 +245,7 @@ static void thermal_of_parameters_init(s
+@@ -246,7 +246,7 @@ static void thermal_of_parameters_init(s
{
int coef[2];
int ncoef = ARRAY_SIZE(coef);
tzp->no_hwmon = true;
-@@ -257,14 +257,11 @@ static void thermal_of_parameters_init(s
+@@ -258,14 +258,11 @@ static void thermal_of_parameters_init(s
* thermal zone. Thus, we are considering only the first two
* values as slope and offset.
*/
}
static struct device_node *thermal_of_zone_get_by_name(struct thermal_zone_device *tz)
-@@ -458,10 +455,15 @@ static void thermal_of_zone_unregister(s
+@@ -459,10 +456,15 @@ static void thermal_of_zone_unregister(s
* zone properties and registers new thermal zone with those
* properties.
*
*
* Return: a valid thermal zone structure pointer on success.
* - EINVAL: if the device tree thermal description is malformed
-@@ -469,11 +471,11 @@ static void thermal_of_zone_unregister(s
+@@ -470,11 +472,11 @@ static void thermal_of_zone_unregister(s
* - Other negative errors are returned by the underlying called functions
*/
static struct thermal_zone_device *thermal_of_zone_register(struct device_node *sensor, int id, void *data,
struct thermal_zone_device_ops *of_ops;
struct device_node *np;
int delay, pdelay;
-@@ -508,7 +510,7 @@ static struct thermal_zone_device *therm
+@@ -509,7 +511,7 @@ static struct thermal_zone_device *therm
goto out_kfree_trips;
}
of_ops->bind = thermal_of_bind;
of_ops->unbind = thermal_of_unbind;
-@@ -516,7 +518,7 @@ static struct thermal_zone_device *therm
+@@ -517,7 +519,7 @@ static struct thermal_zone_device *therm
mask = GENMASK_ULL((ntrips) - 1, 0);
tz = thermal_zone_device_register_with_trips(np->name, trips, ntrips,
pdelay, delay);
if (IS_ERR(tz)) {
ret = PTR_ERR(tz);
-@@ -571,6 +573,7 @@ static int devm_thermal_of_zone_match(st
+@@ -572,6 +574,7 @@ static int devm_thermal_of_zone_match(st
struct thermal_zone_device *devm_thermal_of_zone_register(struct device *dev, int sensor_id, void *data,
const struct thermal_zone_device_ops *ops)
{
struct thermal_zone_device **ptr, *tzd;
ptr = devres_alloc(devm_thermal_of_zone_release, sizeof(*ptr),
-@@ -578,7 +581,7 @@ struct thermal_zone_device *devm_thermal
+@@ -579,7 +582,7 @@ struct thermal_zone_device *devm_thermal
if (!ptr)
return ERR_PTR(-ENOMEM);
if (IS_ERR(tzd)) {
devres_free(ptr);
return tzd;
-@@ -592,6 +595,46 @@ struct thermal_zone_device *devm_thermal
+@@ -593,6 +596,46 @@ struct thermal_zone_device *devm_thermal
EXPORT_SYMBOL_GPL(devm_thermal_of_zone_register);
/**
}
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
-@@ -5710,7 +5710,7 @@ static void port_event(struct usb_hub *h
+@@ -5712,7 +5712,7 @@ static void port_event(struct usb_hub *h
port_dev->over_current_count++;
port_over_current_notify(port_dev);
--- a/net/bluetooth/hci_sync.c
+++ b/net/bluetooth/hci_sync.c
-@@ -4872,6 +4872,7 @@ static const struct {
+@@ -4873,6 +4873,7 @@ static const struct {
*/
static int hci_dev_setup_sync(struct hci_dev *hdev)
{
int ret = 0;
bool invalid_bdaddr;
size_t i;
-@@ -4900,7 +4901,8 @@ static int hci_dev_setup_sync(struct hci
+@@ -4901,7 +4902,8 @@ static int hci_dev_setup_sync(struct hci
test_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
if (!ret) {
if (test_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks) &&
/* Global Debug LSP MUX Select */
#define DWC3_GDBGLSPMUX_ENDBC BIT(15) /* Host only */
#define DWC3_GDBGLSPMUX_HOSTSELECT(n) ((n) & 0x3fff)
-@@ -1066,6 +1069,7 @@ struct dwc3_scratchpad_array {
+@@ -1067,6 +1070,7 @@ struct dwc3_scratchpad_array {
* @tx_max_burst_prd: max periodic ESS transmit burst size
* @tx_fifo_resize_max_num: max number of fifos allocated during txfifo resize
* @clear_stall_protocol: endpoint number that requires a delayed status phase
* @hsphy_interface: "utmi" or "ulpi"
* @connected: true when we're connected to a host, false otherwise
* @softconnect: true when gadget connect is called, false when disconnect runs
-@@ -1303,6 +1307,7 @@ struct dwc3 {
+@@ -1304,6 +1308,7 @@ struct dwc3 {
u8 tx_max_burst_prd;
u8 tx_fifo_resize_max_num;
u8 clear_stall_protocol;
#define DWC3_GUCTL1_RESUME_OPMODE_HS_HOST BIT(10)
/* Global Status Register */
-@@ -1121,10 +1122,12 @@ struct dwc3_scratchpad_array {
+@@ -1122,10 +1123,12 @@ struct dwc3_scratchpad_array {
* generation after resume from suspend.
* @ulpi_ext_vbus_drv: Set to confiure the upli chip to drives CPEN pin
* VBUS with an external supply.
* @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk
* @tx_de_emphasis: Tx de-emphasis value
* 0 - -6dB de-emphasis
-@@ -1351,6 +1354,7 @@ struct dwc3 {
+@@ -1352,6 +1355,7 @@ struct dwc3 {
unsigned ulpi_ext_vbus_drv:1;
unsigned parkmode_disable_ss_quirk:1;
unsigned parkmode_disable_hs_quirk:1;
--- a/net/bluetooth/hci_sync.c
+++ b/net/bluetooth/hci_sync.c
-@@ -4872,7 +4872,8 @@ static const struct {
+@@ -4873,7 +4873,8 @@ static const struct {
*/
static int hci_dev_setup_sync(struct hci_dev *hdev)
{
#define DWC3_GUCTL1_PARKMODE_DISABLE_SS BIT(17)
#define DWC3_GUCTL1_PARKMODE_DISABLE_HS BIT(16)
#define DWC3_GUCTL1_PARKMODE_DISABLE_FSLS BIT(15)
-@@ -1122,6 +1124,8 @@ struct dwc3_scratchpad_array {
+@@ -1123,6 +1125,8 @@ struct dwc3_scratchpad_array {
* generation after resume from suspend.
* @ulpi_ext_vbus_drv: Set to confiure the upli chip to drives CPEN pin
* VBUS with an external supply.
* @parkmode_disable_ss_quirk: If set, disable park mode feature for all
* Superspeed instances.
* @parkmode_disable_hs_quirk: If set, disable park mode feature for all
-@@ -1352,6 +1356,8 @@ struct dwc3 {
+@@ -1353,6 +1357,8 @@ struct dwc3 {
unsigned dis_tx_ipgap_linecheck_quirk:1;
unsigned resume_hs_terminations:1;
unsigned ulpi_ext_vbus_drv:1;
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
-@@ -2682,7 +2682,7 @@ int nf_conntrack_init_start(void)
+@@ -2685,7 +2685,7 @@ int nf_conntrack_init_start(void)
if (!nf_conntrack_htable_size) {
nf_conntrack_htable_size
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
-@@ -8421,7 +8421,7 @@ static int nft_register_flowtable_net_ho
+@@ -8425,7 +8425,7 @@ static int nft_register_flowtable_net_ho
err = flowtable->data.type->setup(&flowtable->data,
hook->ops.dev,
FLOW_BLOCK_BIND);
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
-@@ -1002,6 +1002,8 @@ struct dwc3_scratchpad_array {
+@@ -1003,6 +1003,8 @@ struct dwc3_scratchpad_array {
* @bus_clk: clock for accessing the registers
* @ref_clk: reference clock
* @susp_clk: clock used when the SS phy is in low power (S3) state
* @reset: reset control
* @regs: base address for our registers
* @regs_size: address space size
-@@ -1174,6 +1176,8 @@ struct dwc3 {
+@@ -1175,6 +1177,8 @@ struct dwc3 {
struct clk *bus_clk;
struct clk *ref_clk;
struct clk *susp_clk;
+ uart->probe = up->probe;
if (uart->port.type != PORT_8250_CIR) {
- if (serial8250_isa_config != NULL)
+ if (uart_console_registered(&uart->port))
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -612,6 +612,9 @@ static int dw8250_probe(struct platform_