ar71xx: WNR612v2: enable control of all LEDs and buttons

This patch provides full GPIO support for WNR612v2 (LEDs and buttons).
It exposes all LEDs to operating system, including Ethernet ones.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
SVN-Revision: 48924

diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 37ee3d32a7ee4f0f405b41b2b1f8d70a9c769c1b..6cec5dfbddea76f64a74ff9f05af62f5d0c76bfb 100755 (executable)
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -700,6 +700,13 @@ wnr2000-v4)
        ucidef_set_led_usbdev "usb" "USB" "netgear:amber:status" "1-1"
        ;;
 
+wnr612-v2)
+       ucidef_set_led_netdev "wan" "WAN" "netgear:green:wan" "eth0"
+       ucidef_set_led_netdev "wlan" "WLAN" "netgear:green:wlan" "wlan0"
+       ucidef_set_led_switch "lan1" "LAN1" "netgear:green:lan1" "switch0" "0x02" "0x0f"
+       ucidef_set_led_switch "lan2" "LAN2" "netgear:green:lan2" "switch0" "0x04" "0x0f"
+       ;;
+
 wpn824n)
        ucidef_set_led_netdev "wan-amber" "WAN (amber)" "netgear:amber:wan" "eth0"
        ucidef_set_led_wlan "wlan" "WLAN" "netgear:blue:wlan" "phy0tpt"

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v3.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v3.c
index f29086b20425e9b008c57003b75c37850d60f951..13d1285f48f670e011e9d91ec67b8cdb00f6c501 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v3.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v3.c
@@ -49,7 +49,15 @@
 #define WNR2000V3_GPIO_WMAC_BTN_RESET          8
 #define WNR2000V3_GPIO_WMAC_BTN_RFKILL         9
 
-#define WNR612V2_GPIO_LED_PWR_GREEN    11
+/* WNR612v2 - connected through AR7241 */
+#define WNR612V2_GPIO_LED_POWER_GREEN  11
+#define WNR612V2_GPIO_LED_LAN1_GREEN   13
+#define WNR612V2_GPIO_LED_LAN2_GREEN   14
+#define WNR612V2_GPIO_LED_WAN_GREEN    17
+
+/* WNR612v2 - connected through AR9285 */
+#define WNR612V2_GPIO_WMAC_LED_WLAN_GREEN      1
+#define WNR612V2_GPIO_WMAC_BTN_RESET           7
 
 #define WNR1000V2_GPIO_LED_PWR_AMBER   1
 #define WNR1000V2_GPIO_LED_PWR_GREEN   11
@@ -152,11 +160,25 @@ static const char *wnr2000v3_wmac_led_name = "netgear:blue:wlan";
 static struct gpio_led wnr612v2_leds_gpio[] __initdata = {
        {
                .name           = "netgear:green:power",
-               .gpio           = WNR612V2_GPIO_LED_PWR_GREEN,
+               .gpio           = WNR612V2_GPIO_LED_POWER_GREEN,
+               .active_low     = 1,
+       }, {
+               .name           = "netgear:green:lan1",
+               .gpio           = WNR612V2_GPIO_LED_LAN1_GREEN,
+               .active_low     = 1,
+       }, {
+               .name           = "netgear:green:lan2",
+               .gpio           = WNR612V2_GPIO_LED_LAN2_GREEN,
+               .active_low     = 1,
+       }, {
+               .name           = "netgear:green:wan",
+               .gpio           = WNR612V2_GPIO_LED_WAN_GREEN,
                .active_low     = 1,
        }
 };
 
+static const char *wnr612v2_wmac_led_name = "netgear:green:wlan";
+
 static struct gpio_led wnr1000v2_leds_gpio[] __initdata = {
        {
                .name           = "netgear:green:power",
@@ -270,6 +292,17 @@ static struct gpio_keys_button wnr2000v3_wmac_keys_gpio[] = {
        }
 };
 
+static struct gpio_keys_button wnr612v2_wmac_keys_gpio[] = {
+       {
+               .desc           = "reset",
+               .type           = EV_KEY,
+               .code           = KEY_RESTART,
+               .debounce_interval = WNR2000V3_KEYS_DEBOUNCE_INTERVAL,
+               .gpio           = WNR612V2_GPIO_WMAC_BTN_RESET,
+               .active_low     = 1,
+       }
+};
+
 /*
  * For WNR2000v3 ART flash area used for WLAN MAC is usually empty (0xff)
  * so ath9k driver uses random MAC instead each time module is loaded.
@@ -375,6 +408,25 @@ static void __init wnr612v2_setup(void)
 {
        u8 wlan_mac_addr[6];
 
+       /*
+        * Disable JTAG and CLKs. Allow OS to control all link LEDs.
+        * Note: U-Boot for WNR612v2 sets undocumented bit 15 but
+        * we leave it for now.
+        */
+       ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE |
+                                 AR724X_GPIO_FUNC_UART_EN,
+                                 AR724X_GPIO_FUNC_CLK_OBS1_EN |
+                                 AR724X_GPIO_FUNC_CLK_OBS2_EN |
+                                 AR724X_GPIO_FUNC_CLK_OBS3_EN |
+                                 AR724X_GPIO_FUNC_CLK_OBS4_EN |
+                                 AR724X_GPIO_FUNC_CLK_OBS5_EN |
+                                 AR724X_GPIO_FUNC_GE0_MII_CLK_EN |
+                                 AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+                                 AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+                                 AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+                                 AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+                                 AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
        wnr_get_wmac(wlan_mac_addr, WNR2000V3_MAC0_OFFSET,
                     WNR2000V3_MAC1_OFFSET, WNR2000V3_WMAC_OFFSET);
 
@@ -382,6 +434,19 @@ static void __init wnr612v2_setup(void)
 
        ath79_register_leds_gpio(-1, ARRAY_SIZE(wnr612v2_leds_gpio),
                                 wnr612v2_leds_gpio);
+
+       /*
+        * This device has no buttons on AR7241 GPIO and no extra LEDs
+        * connected to AR9285 so setup is simpler than for WNR2000v3.
+        */
+       ap9x_pci_setup_wmac_led_pin(0, WNR612V2_GPIO_WMAC_LED_WLAN_GREEN);
+       ap9x_pci_setup_wmac_led_name(0, wnr612v2_wmac_led_name);
+
+       ap9x_pci_setup_wmac_leds(0, NULL, 0);
+
+       ap9x_pci_setup_wmac_btns(0, wnr612v2_wmac_keys_gpio,
+                                ARRAY_SIZE(wnr612v2_wmac_keys_gpio),
+                                WNR2000V3_KEYS_POLL_INTERVAL);
 }
 
 MIPS_MACHINE(ATH79_MACH_WNR612_V2, "WNR612V2", "NETGEAR WNR612 V2", wnr612v2_setup);