}
+int mmc_host_set_uhs_voltage(struct mmc_host *host)
+{
+ u32 clock;
+
+ /*
+ * During a signal voltage level switch, the clock must be gated
+ * for 5 ms according to the SD spec
+ */
+ clock = host->ios.clock;
+ host->ios.clock = 0;
+ mmc_set_ios(host);
+
+ if (mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180))
+ return -EAGAIN;
+
+ /* Keep clock gated for at least 10 ms, though spec only says 5 ms */
+ mmc_delay(10);
+ host->ios.clock = clock;
+ mmc_set_ios(host);
+
+ return 0;
+}
+
int mmc_set_uhs_voltage(struct mmc_host *host, u32 ocr)
{
struct mmc_command cmd = {};
int err = 0;
- u32 clock;
/*
* If we cannot switch voltages, return failure so the caller
err = -EAGAIN;
goto power_cycle;
}
- /*
- * During a signal voltage level switch, the clock must be gated
- * for 5 ms according to the SD spec
- */
- clock = host->ios.clock;
- host->ios.clock = 0;
- mmc_set_ios(host);
- if (mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180)) {
+ if (mmc_host_set_uhs_voltage(host)) {
/*
* Voltages may not have been switched, but we've already
* sent CMD11, so a power cycle is required anyway
goto power_cycle;
}
- /* Keep clock gated for at least 10 ms, though spec only says 5 ms */
- mmc_delay(10);
- host->ios.clock = clock;
- mmc_set_ios(host);
-
/* Wait for at least 1 ms according to spec */
mmc_delay(1);
void mmc_set_bus_width(struct mmc_host *host, unsigned int width);
u32 mmc_select_voltage(struct mmc_host *host, u32 ocr);
int mmc_set_uhs_voltage(struct mmc_host *host, u32 ocr);
+int mmc_host_set_uhs_voltage(struct mmc_host *host);
int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage);
void mmc_set_timing(struct mmc_host *host, unsigned int timing);
void mmc_set_driver_type(struct mmc_host *host, unsigned int drv_type);