{
}
-static bool tegra_dsi_encoder_mode_fixup(struct drm_encoder *encoder,
- const struct drm_display_mode *mode,
- struct drm_display_mode *adjusted)
-{
- struct tegra_output *output = encoder_to_output(encoder);
- struct tegra_dc *dc = to_tegra_dc(encoder->crtc);
- unsigned int mul, div, scdiv, vrefresh, lanes;
- struct tegra_dsi *dsi = to_dsi(output);
- struct mipi_dphy_timing timing;
- unsigned long pclk, bclk, plld;
- unsigned long period;
- int err;
-
- lanes = tegra_dsi_get_lanes(dsi);
- pclk = mode->clock * 1000;
-
- err = tegra_dsi_get_muldiv(dsi->format, &mul, &div);
- if (err < 0)
- return err;
-
- DRM_DEBUG_KMS("mul: %u, div: %u, lanes: %u\n", mul, div, lanes);
- vrefresh = drm_mode_vrefresh(mode);
- DRM_DEBUG_KMS("vrefresh: %u\n", vrefresh);
-
- /* compute byte clock */
- bclk = (pclk * mul) / (div * lanes);
-
- /*
- * Compute bit clock and round up to the next MHz.
- */
- plld = DIV_ROUND_UP(bclk * 8, USEC_PER_SEC) * USEC_PER_SEC;
- period = DIV_ROUND_CLOSEST(NSEC_PER_SEC, plld);
-
- /*
- * We divide the frequency by two here, but we make up for that by
- * setting the shift clock divider (further below) to half of the
- * correct value.
- */
- plld /= 2;
-
- /*
- * Derive pixel clock from bit clock using the shift clock divider.
- * Note that this is only half of what we would expect, but we need
- * that to make up for the fact that we divided the bit clock by a
- * factor of two above.
- *
- * It's not clear exactly why this is necessary, but the display is
- * not working properly otherwise. Perhaps the PLLs cannot generate
- * frequencies sufficiently high.
- */
- scdiv = ((8 * mul) / (div * lanes)) - 2;
-
- err = tegra_dc_setup_clock(dc, dsi->clk_parent, plld, scdiv);
- if (err < 0) {
- dev_err(output->dev, "failed to setup DC clock: %d\n", err);
- return false;
- }
-
- err = clk_set_rate(dsi->clk_parent, plld);
- if (err < 0) {
- dev_err(dsi->dev, "failed to set clock rate to %lu Hz\n",
- plld);
- return false;
- }
-
- tegra_dsi_set_timeout(dsi, bclk, vrefresh);
-
- err = mipi_dphy_timing_get_default(&timing, period);
- if (err < 0)
- return err;
-
- err = mipi_dphy_timing_validate(&timing, period);
- if (err < 0) {
- dev_err(dsi->dev, "failed to validate D-PHY timing: %d\n", err);
- return err;
- }
-
- /*
- * The D-PHY timing fields are expressed in byte-clock cycles, so
- * multiply the period by 8.
- */
- tegra_dsi_set_phy_timing(dsi, period * 8, &timing);
-
- return true;
-}
-
static void tegra_dsi_encoder_prepare(struct drm_encoder *encoder)
{
}
static const struct drm_encoder_helper_funcs tegra_dsi_encoder_helper_funcs = {
.dpms = tegra_dsi_encoder_dpms,
- .mode_fixup = tegra_dsi_encoder_mode_fixup,
.prepare = tegra_dsi_encoder_prepare,
.commit = tegra_dsi_encoder_commit,
.mode_set = tegra_dsi_encoder_mode_set,
{
}
-static bool tegra_hdmi_encoder_mode_fixup(struct drm_encoder *encoder,
- const struct drm_display_mode *mode,
- struct drm_display_mode *adjusted)
-{
- struct tegra_output *output = encoder_to_output(encoder);
- struct tegra_dc *dc = to_tegra_dc(encoder->crtc);
- struct tegra_hdmi *hdmi = to_hdmi(output);
- unsigned long pclk = mode->clock * 1000;
- int err;
-
- err = tegra_dc_setup_clock(dc, hdmi->clk_parent, pclk, 0);
- if (err < 0) {
- dev_err(output->dev, "failed to setup DC clock: %d\n", err);
- return false;
- }
-
- err = clk_set_rate(hdmi->clk_parent, pclk);
- if (err < 0) {
- dev_err(output->dev, "failed to set clock rate to %lu Hz\n",
- pclk);
- return false;
- }
-
- return true;
-}
-
static void tegra_hdmi_encoder_prepare(struct drm_encoder *encoder)
{
}
static const struct drm_encoder_helper_funcs tegra_hdmi_encoder_helper_funcs = {
.dpms = tegra_hdmi_encoder_dpms,
- .mode_fixup = tegra_hdmi_encoder_mode_fixup,
.prepare = tegra_hdmi_encoder_prepare,
.commit = tegra_hdmi_encoder_commit,
.mode_set = tegra_hdmi_encoder_mode_set,
{
}
-static bool tegra_rgb_encoder_mode_fixup(struct drm_encoder *encoder,
- const struct drm_display_mode *mode,
- struct drm_display_mode *adjusted)
-{
- struct tegra_output *output = encoder_to_output(encoder);
- unsigned long pclk = mode->clock * 1000;
- struct tegra_rgb *rgb = to_rgb(output);
- unsigned int div;
- int err;
-
- /*
- * We may not want to change the frequency of the parent clock, since
- * it may be a parent for other peripherals. This is due to the fact
- * that on Tegra20 there's only a single clock dedicated to display
- * (pll_d_out0), whereas later generations have a second one that can
- * be used to independently drive a second output (pll_d2_out0).
- *
- * As a way to support multiple outputs on Tegra20 as well, pll_p is
- * typically used as the parent clock for the display controllers.
- * But this comes at a cost: pll_p is the parent of several other
- * peripherals, so its frequency shouldn't change out of the blue.
- *
- * The best we can do at this point is to use the shift clock divider
- * and hope that the desired frequency can be matched (or at least
- * matched sufficiently close that the panel will still work).
- */
- div = ((clk_get_rate(rgb->clk) * 2) / pclk) - 2;
-
- err = tegra_dc_setup_clock(rgb->dc, rgb->clk_parent, pclk, div);
- if (err < 0) {
- dev_err(output->dev, "failed to setup DC clock: %d\n", err);
- return false;
- }
-
- return true;
-}
-
static void tegra_rgb_encoder_prepare(struct drm_encoder *encoder)
{
}
static const struct drm_encoder_helper_funcs tegra_rgb_encoder_helper_funcs = {
.dpms = tegra_rgb_encoder_dpms,
- .mode_fixup = tegra_rgb_encoder_mode_fixup,
.prepare = tegra_rgb_encoder_prepare,
.commit = tegra_rgb_encoder_commit,
.mode_set = tegra_rgb_encoder_mode_set,
{
}
-static bool tegra_sor_encoder_mode_fixup(struct drm_encoder *encoder,
- const struct drm_display_mode *mode,
- struct drm_display_mode *adjusted)
-{
- struct tegra_output *output = encoder_to_output(encoder);
- struct tegra_dc *dc = to_tegra_dc(encoder->crtc);
- unsigned long pclk = mode->clock * 1000;
- struct tegra_sor *sor = to_sor(output);
- int err;
-
- err = tegra_dc_setup_clock(dc, sor->clk_parent, pclk, 0);
- if (err < 0) {
- dev_err(output->dev, "failed to setup DC clock: %d\n", err);
- return false;
- }
-
- err = clk_set_rate(sor->clk_parent, pclk);
- if (err < 0) {
- dev_err(output->dev, "failed to set clock rate to %lu Hz\n",
- pclk);
- return false;
- }
-
- return true;
-}
-
static void tegra_sor_encoder_prepare(struct drm_encoder *encoder)
{
}
static const struct drm_encoder_helper_funcs tegra_sor_encoder_helper_funcs = {
.dpms = tegra_sor_encoder_dpms,
- .mode_fixup = tegra_sor_encoder_mode_fixup,
.prepare = tegra_sor_encoder_prepare,
.commit = tegra_sor_encoder_commit,
.mode_set = tegra_sor_encoder_mode_set,
projects / openwrt / staging / blogic.git / commitdiff