--- a/nl80211.h
+++ b/nl80211.h
-@@ -27,6 +27,8 @@
-
- #include <linux/types.h>
-
-+#define NL80211_GENL_NAME "nl80211"
-+
- /**
- * DOC: Station handling
- *
-@@ -1429,6 +1431,11 @@ enum nl80211_commands {
- * @NL80211_ATTR_MAX_CRIT_PROT_DURATION: duration in milliseconds in which
- * the connection should have increased reliability (u16).
+@@ -1555,6 +1555,9 @@ enum nl80211_commands {
+ * data is in the format defined for the payload of the QoS Map Set element
+ * in IEEE Std 802.11-2012, 8.4.2.97.
*
-+ * @NL80211_ATTR_PEER_AID: Association ID for the peer TDLS station (u16).
-+ * This is similar to @NL80211_ATTR_STA_AID but with a difference of being
-+ * allowed to be used with the first @NL80211_CMD_SET_STATION command to
-+ * update a TDLS peer STA entry.
++ * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce
++ * transmit power to stay within regulatory limits. u32, dBi.
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
-@@ -1727,6 +1734,10 @@ enum nl80211_attrs {
- NL80211_ATTR_CRIT_PROT_ID,
- NL80211_ATTR_MAX_CRIT_PROT_DURATION,
+@@ -1883,6 +1886,8 @@ enum nl80211_attrs {
+
+ NL80211_ATTR_QOS_MAP,
-+ NL80211_ATTR_PEER_AID,
-+
+ NL80211_ATTR_WIPHY_ANTENNA_GAIN,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
-@@ -1991,6 +2002,10 @@ enum nl80211_sta_bss_param {
- * @NL80211_STA_INFO_PEER_PM: peer mesh STA link-specific power mode
- * @NL80211_STA_INFO_NONPEER_PM: neighbor mesh STA power save mode towards
- * non-peer STA
-+ * @NL80211_STA_INFO_CHAIN_SIGNAL: per-chain signal strength of last PPDU
-+ * Contains a nested array of signal strength attributes (u8, dBm)
-+ * @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average
-+ * Same format as NL80211_STA_INFO_CHAIN_SIGNAL.
- * @__NL80211_STA_INFO_AFTER_LAST: internal
- * @NL80211_STA_INFO_MAX: highest possible station info attribute
- */
-@@ -2020,6 +2035,8 @@ enum nl80211_sta_info {
- NL80211_STA_INFO_NONPEER_PM,
- NL80211_STA_INFO_RX_BYTES64,
- NL80211_STA_INFO_TX_BYTES64,
-+ NL80211_STA_INFO_CHAIN_SIGNAL,
-+ NL80211_STA_INFO_CHAIN_SIGNAL_AVG,
-
- /* keep last */
- __NL80211_STA_INFO_AFTER_LAST,
-@@ -2413,6 +2430,8 @@ enum nl80211_survey_info {
- * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering
- * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing.
- * overrides all other flags.
-+ * @NL80211_MNTR_FLAG_ACTIVE: use the configured MAC address
-+ * and ACK incoming unicast packets.
- *
- * @__NL80211_MNTR_FLAG_AFTER_LAST: internal use
- * @NL80211_MNTR_FLAG_MAX: highest possible monitor flag
-@@ -2424,6 +2443,7 @@ enum nl80211_mntr_flags {
- NL80211_MNTR_FLAG_CONTROL,
- NL80211_MNTR_FLAG_OTHER_BSS,
- NL80211_MNTR_FLAG_COOK_FRAMES,
-+ NL80211_MNTR_FLAG_ACTIVE,
-
- /* keep last */
- __NL80211_MNTR_FLAG_AFTER_LAST,
-@@ -2559,6 +2579,10 @@ enum nl80211_mesh_power_mode {
- *
- * @NL80211_MESHCONF_AWAKE_WINDOW: awake window duration (in TUs)
- *
-+ * @NL80211_MESHCONF_PLINK_TIMEOUT: If no tx activity is seen from a STA we've
-+ * established peering with for longer than this time (in seconds), then
-+ * remove it from the STA's list of peers. Default is 30 minutes.
-+ *
- * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
- */
- enum nl80211_meshconf_params {
-@@ -2590,6 +2614,7 @@ enum nl80211_meshconf_params {
- NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL,
- NL80211_MESHCONF_POWER_MODE,
- NL80211_MESHCONF_AWAKE_WINDOW,
-+ NL80211_MESHCONF_PLINK_TIMEOUT,
-
- /* keep last */
- __NL80211_MESHCONF_ATTR_AFTER_LAST,
-@@ -2637,6 +2662,10 @@ enum nl80211_meshconf_params {
- * @NL80211_MESH_SETUP_USERSPACE_MPM: Enable this option if userspace will
- * implement an MPM which handles peer allocation and state.
- *
-+ * @NL80211_MESH_SETUP_AUTH_PROTOCOL: Inform the kernel of the authentication
-+ * method (u8, as defined in IEEE 8.4.2.100.6, e.g. 0x1 for SAE).
-+ * Default is no authentication method required.
-+ *
- * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
- *
- * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use
-@@ -2650,6 +2679,7 @@ enum nl80211_mesh_setup_params {
- NL80211_MESH_SETUP_USERSPACE_AMPE,
- NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC,
- NL80211_MESH_SETUP_USERSPACE_MPM,
-+ NL80211_MESH_SETUP_AUTH_PROTOCOL,
-
- /* keep last */
- __NL80211_MESH_SETUP_ATTR_AFTER_LAST,
-@@ -2730,6 +2760,8 @@ enum nl80211_channel_type {
- * and %NL80211_ATTR_CENTER_FREQ2 attributes must be provided as well
- * @NL80211_CHAN_WIDTH_160: 160 MHz channel, the %NL80211_ATTR_CENTER_FREQ1
- * attribute must be provided as well
-+ * @NL80211_CHAN_WIDTH_5: 5 MHz OFDM channel
-+ * @NL80211_CHAN_WIDTH_10: 10 MHz OFDM channel
- */
- enum nl80211_chan_width {
- NL80211_CHAN_WIDTH_20_NOHT,
-@@ -2738,6 +2770,8 @@ enum nl80211_chan_width {
- NL80211_CHAN_WIDTH_80,
- NL80211_CHAN_WIDTH_80P80,
- NL80211_CHAN_WIDTH_160,
-+ NL80211_CHAN_WIDTH_5,
-+ NL80211_CHAN_WIDTH_10,
- };
-
- /**
-@@ -3028,11 +3062,11 @@ enum nl80211_tx_power_setting {
- };
-
- /**
-- * enum nl80211_wowlan_packet_pattern_attr - WoWLAN packet pattern attribute
-- * @__NL80211_WOWLAN_PKTPAT_INVALID: invalid number for nested attribute
-- * @NL80211_WOWLAN_PKTPAT_PATTERN: the pattern, values where the mask has
-+ * enum nl80211_packet_pattern_attr - packet pattern attribute
-+ * @__NL80211_PKTPAT_INVALID: invalid number for nested attribute
-+ * @NL80211_PKTPAT_PATTERN: the pattern, values where the mask has
- * a zero bit are ignored
-- * @NL80211_WOWLAN_PKTPAT_MASK: pattern mask, must be long enough to have
-+ * @NL80211_PKTPAT_MASK: pattern mask, must be long enough to have
- * a bit for each byte in the pattern. The lowest-order bit corresponds
- * to the first byte of the pattern, but the bytes of the pattern are
- * in a little-endian-like format, i.e. the 9th byte of the pattern
-@@ -3043,23 +3077,23 @@ enum nl80211_tx_power_setting {
- * Note that the pattern matching is done as though frames were not
- * 802.11 frames but 802.3 frames, i.e. the frame is fully unpacked
- * first (including SNAP header unpacking) and then matched.
-- * @NL80211_WOWLAN_PKTPAT_OFFSET: packet offset, pattern is matched after
-+ * @NL80211_PKTPAT_OFFSET: packet offset, pattern is matched after
- * these fixed number of bytes of received packet
-- * @NUM_NL80211_WOWLAN_PKTPAT: number of attributes
-- * @MAX_NL80211_WOWLAN_PKTPAT: max attribute number
-+ * @NUM_NL80211_PKTPAT: number of attributes
-+ * @MAX_NL80211_PKTPAT: max attribute number
- */
--enum nl80211_wowlan_packet_pattern_attr {
-- __NL80211_WOWLAN_PKTPAT_INVALID,
-- NL80211_WOWLAN_PKTPAT_MASK,
-- NL80211_WOWLAN_PKTPAT_PATTERN,
-- NL80211_WOWLAN_PKTPAT_OFFSET,
-+enum nl80211_packet_pattern_attr {
-+ __NL80211_PKTPAT_INVALID,
-+ NL80211_PKTPAT_MASK,
-+ NL80211_PKTPAT_PATTERN,
-+ NL80211_PKTPAT_OFFSET,
-
-- NUM_NL80211_WOWLAN_PKTPAT,
-- MAX_NL80211_WOWLAN_PKTPAT = NUM_NL80211_WOWLAN_PKTPAT - 1,
-+ NUM_NL80211_PKTPAT,
-+ MAX_NL80211_PKTPAT = NUM_NL80211_PKTPAT - 1,
- };
-
- /**
-- * struct nl80211_wowlan_pattern_support - pattern support information
-+ * struct nl80211_pattern_support - packet pattern support information
- * @max_patterns: maximum number of patterns supported
- * @min_pattern_len: minimum length of each pattern
- * @max_pattern_len: maximum length of each pattern
-@@ -3069,13 +3103,22 @@ enum nl80211_wowlan_packet_pattern_attr
- * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED in the
- * capability information given by the kernel to userspace.
- */
--struct nl80211_wowlan_pattern_support {
-+struct nl80211_pattern_support {
- __u32 max_patterns;
- __u32 min_pattern_len;
- __u32 max_pattern_len;
- __u32 max_pkt_offset;
- } __attribute__((packed));
-
-+/* only for backward compatibility */
-+#define __NL80211_WOWLAN_PKTPAT_INVALID __NL80211_PKTPAT_INVALID
-+#define NL80211_WOWLAN_PKTPAT_MASK NL80211_PKTPAT_MASK
-+#define NL80211_WOWLAN_PKTPAT_PATTERN NL80211_PKTPAT_PATTERN
-+#define NL80211_WOWLAN_PKTPAT_OFFSET NL80211_PKTPAT_OFFSET
-+#define NUM_NL80211_WOWLAN_PKTPAT NUM_NL80211_PKTPAT
-+#define MAX_NL80211_WOWLAN_PKTPAT MAX_NL80211_PKTPAT
-+#define nl80211_wowlan_pattern_support nl80211_pattern_support
-+
- /**
- * enum nl80211_wowlan_triggers - WoWLAN trigger definitions
- * @__NL80211_WOWLAN_TRIG_INVALID: invalid number for nested attributes
-@@ -3095,7 +3138,7 @@ struct nl80211_wowlan_pattern_support {
- * pattern matching is done after the packet is converted to the MSDU.
- *
- * In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute
-- * carrying a &struct nl80211_wowlan_pattern_support.
-+ * carrying a &struct nl80211_pattern_support.
- *
- * When reporting wakeup. it is a u32 attribute containing the 0-based
- * index of the pattern that caused the wakeup, in the patterns passed
-@@ -3252,7 +3295,7 @@ struct nl80211_wowlan_tcp_data_token_fea
- * @NL80211_WOWLAN_TCP_WAKE_PAYLOAD: wake packet payload, for advertising a
- * u32 attribute holding the maximum length
- * @NL80211_WOWLAN_TCP_WAKE_MASK: Wake packet payload mask, not used for
-- * feature advertising. The mask works like @NL80211_WOWLAN_PKTPAT_MASK
-+ * feature advertising. The mask works like @NL80211_PKTPAT_MASK
- * but on the TCP payload only.
- * @NUM_NL80211_WOWLAN_TCP: number of TCP attributes
- * @MAX_NL80211_WOWLAN_TCP: highest attribute number
-@@ -3556,6 +3599,10 @@ enum nl80211_ap_sme_features {
- * Peering Management entity which may be implemented by registering for
- * beacons or NL80211_CMD_NEW_PEER_CANDIDATE events. The mesh beacon is
- * still generated by the driver.
-+ * @NL80211_FEATURE_ACTIVE_MONITOR: This driver supports an active monitor
-+ * interface. An active monitor interface behaves like a normal monitor
-+ * interface, but gets added to the driver. It ensures that incoming
-+ * unicast packets directed at the configured interface address get ACKed.
- */
- enum nl80211_feature_flags {
- NL80211_FEATURE_SK_TX_STATUS = 1 << 0,
-@@ -3575,6 +3622,7 @@ enum nl80211_feature_flags {
- NL80211_FEATURE_ADVERTISE_CHAN_LIMITS = 1 << 14,
- NL80211_FEATURE_FULL_AP_CLIENT_STATE = 1 << 15,
- NL80211_FEATURE_USERSPACE_MPM = 1 << 16,
-+ NL80211_FEATURE_ACTIVE_MONITOR = 1 << 17,
- };
-
- /**
+@@ -2442,9 +2447,15 @@ enum nl80211_reg_rule_attr {
+ * enum nl80211_sched_scan_match_attr - scheduled scan match attributes
+ * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching,
+- * only report BSS with matching SSID.
++ * only report BSS with matching SSID.
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI: RSSI threshold (in dBm) for reporting a
+- * BSS in scan results. Filtering is turned off if not specified.
++ * BSS in scan results. Filtering is turned off if not specified. Note that
++ * if this attribute is in a match set of its own, then it is treated as
++ * the default value for all matchsets with an SSID, rather than being a
++ * matchset of its own without an RSSI filter. This is due to problems with
++ * how this API was implemented in the past. Also, due to the same problem,
++ * the only way to create a matchset with only an RSSI filter (with this
++ * attribute) is if there's only a single matchset with the RSSI attribute.
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
+ * attribute number currently defined
+ * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
+++ /dev/null
---- a/station.c
-+++ b/station.c
-@@ -43,7 +43,7 @@ static void print_power_mode(struct nlat
- }
- }
-
--void parse_tx_bitrate(struct nlattr *bitrate_attr, char *buf, int buflen)
-+void parse_bitrate(struct nlattr *bitrate_attr, char *buf, int buflen)
- {
- int rate = 0;
- char *pos = buf;
-@@ -107,6 +107,7 @@ static int print_sta_handler(struct nl_m
- [NL80211_STA_INFO_SIGNAL] = { .type = NLA_U8 },
- [NL80211_STA_INFO_T_OFFSET] = { .type = NLA_U64 },
- [NL80211_STA_INFO_TX_BITRATE] = { .type = NLA_NESTED },
-+ [NL80211_STA_INFO_RX_BITRATE] = { .type = NLA_NESTED },
- [NL80211_STA_INFO_LLID] = { .type = NLA_U16 },
- [NL80211_STA_INFO_PLID] = { .type = NLA_U16 },
- [NL80211_STA_INFO_PLINK_STATE] = { .type = NLA_U8 },
-@@ -177,10 +178,17 @@ static int print_sta_handler(struct nl_m
- if (sinfo[NL80211_STA_INFO_TX_BITRATE]) {
- char buf[100];
-
-- parse_tx_bitrate(sinfo[NL80211_STA_INFO_TX_BITRATE], buf, sizeof(buf));
-+ parse_bitrate(sinfo[NL80211_STA_INFO_TX_BITRATE], buf, sizeof(buf));
- printf("\n\ttx bitrate:\t%s", buf);
- }
-
-+ if (sinfo[NL80211_STA_INFO_RX_BITRATE]) {
-+ char buf[100];
-+
-+ parse_bitrate(sinfo[NL80211_STA_INFO_RX_BITRATE], buf, sizeof(buf));
-+ printf("\n\trx bitrate:\t%s", buf);
-+ }
-+
- if (sinfo[NL80211_STA_INFO_LLID])
- printf("\n\tmesh llid:\t%d",
- nla_get_u16(sinfo[NL80211_STA_INFO_LLID]));
---- a/iw.h
-+++ b/iw.h
-@@ -170,7 +170,7 @@ enum print_ie_type {
- void print_ies(unsigned char *ie, int ielen, bool unknown,
- enum print_ie_type ptype);
-
--void parse_tx_bitrate(struct nlattr *bitrate_attr, char *buf, int buflen);
-+void parse_bitrate(struct nlattr *bitrate_attr, char *buf, int buflen);
-
- DECLARE_SECTION(set);
- DECLARE_SECTION(get);
---- a/link.c
-+++ b/link.c
-@@ -165,7 +165,7 @@ static int print_link_sta(struct nl_msg
- if (sinfo[NL80211_STA_INFO_TX_BITRATE]) {
- char buf[100];
-
-- parse_tx_bitrate(sinfo[NL80211_STA_INFO_TX_BITRATE], buf, sizeof(buf));
-+ parse_bitrate(sinfo[NL80211_STA_INFO_TX_BITRATE], buf, sizeof(buf));
- printf("\ttx bitrate: %s\n", buf);
- }
-
+++ /dev/null
---- a/station.c
-+++ b/station.c
-@@ -91,6 +91,33 @@ void parse_bitrate(struct nlattr *bitrat
- " VHT-NSS %d", nla_get_u8(rinfo[NL80211_RATE_INFO_VHT_NSS]));
- }
-
-+static char *get_chain_signal(struct nlattr *attr_list)
-+{
-+ struct nlattr *attr;
-+ static char buf[64];
-+ char *cur = buf;
-+ int i = 0, rem;
-+ const char *prefix;
-+
-+ if (!attr_list)
-+ return "";
-+
-+ nla_for_each_nested(attr, attr_list, rem) {
-+ if (i++ > 0)
-+ prefix = ", ";
-+ else
-+ prefix = "[";
-+
-+ cur += snprintf(cur, sizeof(buf) - (cur - buf), "%s%d", prefix,
-+ (int8_t) nla_get_u8(attr));
-+ }
-+
-+ if (i)
-+ snprintf(cur, sizeof(buf) - (cur - buf), "] ");
-+
-+ return buf;
-+}
-+
- static int print_sta_handler(struct nl_msg *msg, void *arg)
- {
- struct nlattr *tb[NL80211_ATTR_MAX + 1];
-@@ -118,7 +145,10 @@ static int print_sta_handler(struct nl_m
- [NL80211_STA_INFO_LOCAL_PM] = { .type = NLA_U32},
- [NL80211_STA_INFO_PEER_PM] = { .type = NLA_U32},
- [NL80211_STA_INFO_NONPEER_PM] = { .type = NLA_U32},
-+ [NL80211_STA_INFO_CHAIN_SIGNAL] = { .type = NLA_NESTED },
-+ [NL80211_STA_INFO_CHAIN_SIGNAL_AVG] = { .type = NLA_NESTED },
- };
-+ char *chain;
-
- nla_parse(tb, NL80211_ATTR_MAX, genlmsg_attrdata(gnlh, 0),
- genlmsg_attrlen(gnlh, 0), NULL);
-@@ -165,12 +195,19 @@ static int print_sta_handler(struct nl_m
- if (sinfo[NL80211_STA_INFO_TX_FAILED])
- printf("\n\ttx failed:\t%u",
- nla_get_u32(sinfo[NL80211_STA_INFO_TX_FAILED]));
-+
-+ chain = get_chain_signal(sinfo[NL80211_STA_INFO_CHAIN_SIGNAL]);
- if (sinfo[NL80211_STA_INFO_SIGNAL])
-- printf("\n\tsignal: \t%d dBm",
-- (int8_t)nla_get_u8(sinfo[NL80211_STA_INFO_SIGNAL]));
-+ printf("\n\tsignal: \t%d %sdBm",
-+ (int8_t)nla_get_u8(sinfo[NL80211_STA_INFO_SIGNAL]),
-+ chain);
-+
-+ chain = get_chain_signal(sinfo[NL80211_STA_INFO_CHAIN_SIGNAL_AVG]);
- if (sinfo[NL80211_STA_INFO_SIGNAL_AVG])
-- printf("\n\tsignal avg:\t%d dBm",
-- (int8_t)nla_get_u8(sinfo[NL80211_STA_INFO_SIGNAL_AVG]));
-+ printf("\n\tsignal avg:\t%d %sdBm",
-+ (int8_t)nla_get_u8(sinfo[NL80211_STA_INFO_SIGNAL_AVG]),
-+ chain);
-+
- if (sinfo[NL80211_STA_INFO_T_OFFSET])
- printf("\n\tToffset:\t%lld us",
- (unsigned long long)nla_get_u64(sinfo[NL80211_STA_INFO_T_OFFSET]));
interface.o ibss.o station.o survey.o util.o \
mesh.o mpath.o scan.o reg.o version.o \
- reason.o status.o connect.o link.o offch.o ps.o cqm.o \
-- bitrate.o wowlan.o roc.o p2p.o
+- bitrate.o wowlan.o coalesce.o roc.o p2p.o
+ reason.o status.o connect.o link.o ps.o \
+ bitrate.o
OBJS += sections.o
OBJS-$(HWSIM) += hwsim.o
--- a/info.c
+++ b/info.c
-@@ -198,6 +198,7 @@ next:
+@@ -204,6 +204,7 @@ next:
}
}
if (tb_band[NL80211_BAND_ATTR_RATES]) {
printf("\t\tBitrates (non-HT):\n");
nla_for_each_nested(nl_rate, tb_band[NL80211_BAND_ATTR_RATES], rem_rate) {
-@@ -214,6 +215,7 @@ next:
+@@ -220,6 +221,7 @@ next:
printf("\n");
}
}
}
}
-@@ -248,6 +250,7 @@ next:
+@@ -254,6 +256,7 @@ next:
printf("\tCoverage class: %d (up to %dm)\n", coverage, 450 * coverage);
}
if (tb_msg[NL80211_ATTR_CIPHER_SUITES]) {
int num = nla_len(tb_msg[NL80211_ATTR_CIPHER_SUITES]) / sizeof(__u32);
int i;
-@@ -259,6 +262,7 @@ next:
+@@ -265,6 +268,7 @@ next:
cipher_name(ciphers[i]));
}
}
if (tb_msg[NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX] &&
tb_msg[NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX])
-@@ -278,11 +282,13 @@ next:
+@@ -284,11 +288,13 @@ next:
printf("\t\t * %s\n", iftype_name(nla_type(nl_mode)));
}
if (tb_msg[NL80211_ATTR_INTERFACE_COMBINATIONS]) {
struct nlattr *nl_combi;
-@@ -379,6 +385,7 @@ broken_combination:
+@@ -385,6 +391,7 @@ broken_combination:
printf("\tinterface combinations are not supported\n");
}
if (tb_msg[NL80211_ATTR_SUPPORTED_COMMANDS]) {
printf("\tSupported commands:\n");
nla_for_each_nested(nl_cmd, tb_msg[NL80211_ATTR_SUPPORTED_COMMANDS], rem_cmd)
-@@ -471,6 +478,7 @@ broken_combination:
+@@ -477,6 +484,7 @@ broken_combination:
printf("\t\t * wake up on TCP connection\n");
}
}
if (tb_msg[NL80211_ATTR_ROAM_SUPPORT])
printf("\tDevice supports roaming.\n");
-@@ -507,6 +515,7 @@ broken_combination:
+@@ -513,6 +521,7 @@ broken_combination:
}
}
if (tb_msg[NL80211_ATTR_FEATURE_FLAGS]) {
unsigned int features = nla_get_u32(tb_msg[NL80211_ATTR_FEATURE_FLAGS]);
-@@ -527,6 +536,7 @@ broken_combination:
+@@ -533,6 +542,7 @@ broken_combination:
if (features & NL80211_FEATURE_AP_SCAN)
printf("\tDevice supports AP scan.\n");
}
+#endif
- return NL_SKIP;
- }
-@@ -558,6 +568,7 @@ TOPLEVEL(list, NULL, NL80211_CMD_GET_WIP
+ if (tb_msg[NL80211_ATTR_TDLS_SUPPORT])
+ printf("\tDevice supports T-DLS.\n");
+@@ -582,6 +592,7 @@ TOPLEVEL(list, NULL, NL80211_CMD_GET_WIP
"List all wireless devices and their capabilities.");
TOPLEVEL(phy, NULL, NL80211_CMD_GET_WIPHY, NLM_F_DUMP, CIB_NONE, handle_info, NULL);
static int handle_commands(struct nl80211_state *state,
struct nl_cb *cb, struct nl_msg *msg,
int argc, char **argv, enum id_input id)
-@@ -570,6 +581,7 @@ static int handle_commands(struct nl8021
+@@ -594,6 +605,7 @@ static int handle_commands(struct nl8021
}
TOPLEVEL(commands, NULL, NL80211_CMD_GET_WIPHY, 0, CIB_NONE, handle_commands,
"list all known commands and their decimal & hex value");
projects / openwrt / staging / jow.git / commitdiff