MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS);
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-static struct ec100_config ec168_ec100_config;
-
-static int ec168_rw_udev(struct usb_device *udev, struct ec168_req *req)
+static int ec168_ctrl_msg(struct dvb_usb_device *d, struct ec168_req *req)
{
int ret;
unsigned int pipe;
u8 request, requesttype;
u8 *buf;
-
-
switch (req->cmd) {
case DOWNLOAD_FIRMWARE:
case GPIO:
if (requesttype == (USB_TYPE_VENDOR | USB_DIR_OUT)) {
/* write */
memcpy(buf, req->data, req->size);
- pipe = usb_sndctrlpipe(udev, 0);
+ pipe = usb_sndctrlpipe(d->udev, 0);
} else {
/* read */
- pipe = usb_rcvctrlpipe(udev, 0);
+ pipe = usb_rcvctrlpipe(d->udev, 0);
}
msleep(1); /* avoid I2C errors */
- ret = usb_control_msg(udev, pipe, request, requesttype, req->value,
+ ret = usb_control_msg(d->udev, pipe, request, requesttype, req->value,
req->index, buf, req->size, EC168_USB_TIMEOUT);
ec168_debug_dump(request, requesttype, req->value, req->index, buf,
return ret;
}
-static int ec168_ctrl_msg(struct dvb_usb_device *d, struct ec168_req *req)
-{
- return ec168_rw_udev(d->udev, req);
-}
-
/* I2C */
+static struct ec100_config ec168_ec100_config;
+
static int ec168_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
int num)
{
return i;
}
-
static u32 ec168_i2c_func(struct i2c_adapter *adapter)
{
return I2C_FUNC_I2C;
};
/* Callbacks for DVB USB */
-static struct ec100_config ec168_ec100_config = {
- .demod_address = 0xff, /* not real address, demod is integrated */
-};
-
-static int ec168_ec100_frontend_attach(struct dvb_usb_adapter *adap)
+static int ec168_identify_state(struct dvb_usb_device *d)
{
+ int ret;
+ u8 reply;
+ struct ec168_req req = {GET_CONFIG, 0, 1, sizeof(reply), &reply};
deb_info("%s:\n", __func__);
- adap->fe_adap[0].fe = dvb_attach(ec100_attach, &ec168_ec100_config,
- &adap->dev->i2c_adap);
- if (adap->fe_adap[0].fe == NULL)
- return -ENODEV;
- return 0;
-}
+ ret = ec168_ctrl_msg(d, &req);
+ if (ret)
+ goto error;
-static struct mxl5005s_config ec168_mxl5003s_config = {
- .i2c_address = 0xc6,
- .if_freq = IF_FREQ_4570000HZ,
- .xtal_freq = CRYSTAL_FREQ_16000000HZ,
- .agc_mode = MXL_SINGLE_AGC,
- .tracking_filter = MXL_TF_OFF,
- .rssi_enable = MXL_RSSI_ENABLE,
- .cap_select = MXL_CAP_SEL_ENABLE,
- .div_out = MXL_DIV_OUT_4,
- .clock_out = MXL_CLOCK_OUT_DISABLE,
- .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM,
- .top = MXL5005S_TOP_25P2,
- .mod_mode = MXL_DIGITAL_MODE,
- .if_mode = MXL_ZERO_IF,
- .AgcMasterByte = 0x00,
-};
+ deb_info("%s: reply:%02x\n", __func__, reply);
-static int ec168_mxl5003s_tuner_attach(struct dvb_usb_adapter *adap)
-{
- deb_info("%s:\n", __func__);
- return dvb_attach(mxl5005s_attach, adap->fe_adap[0].fe, &adap->dev->i2c_adap,
- &ec168_mxl5003s_config) == NULL ? -ENODEV : 0;
-}
+ if (reply == 0x01)
+ ret = WARM;
+ else
+ ret = COLD;
-static int ec168_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
-{
- struct ec168_req req = {STREAMING_CTRL, 0x7f01, 0x0202, 0, NULL};
- deb_info("%s: onoff:%d\n", __func__, onoff);
- if (onoff)
- req.index = 0x0102;
- return ec168_ctrl_msg(adap->dev, &req);
+ return ret;
+error:
+ deb_info("%s: failed:%d\n", __func__, ret);
+ return ret;
}
-static int ec168_download_firmware(struct usb_device *udev,
- const struct firmware *fw)
+static int ec168_download_firmware(struct dvb_usb_device *d,
+ const struct firmware *fw)
{
int i, len, packets, remainder, ret;
u16 addr = 0x0000; /* firmware start address */
req.index = addr;
addr += FW_PACKET_MAX_DATA;
- ret = ec168_rw_udev(udev, &req);
+ ret = ec168_ctrl_msg(d, &req);
if (ret) {
err("firmware download failed:%d packet:%d", ret, i);
goto error;
req.cmd = SET_CONFIG;
req.value = 0;
req.index = 0x0001;
- ret = ec168_rw_udev(udev, &req);
+ ret = ec168_ctrl_msg(d, &req);
if (ret)
goto error;
req.cmd = GPIO;
req.value = 0;
req.index = 0x0206;
- ret = ec168_rw_udev(udev, &req);
+ ret = ec168_ctrl_msg(d, &req);
if (ret)
goto error;
req.cmd = WRITE_I2C;
req.value = 0;
req.index = 0x00c6;
- ret = ec168_rw_udev(udev, &req);
+ ret = ec168_ctrl_msg(d, &req);
if (ret)
goto error;
return ret;
}
-static int ec168_identify_state(struct usb_device *udev,
- struct dvb_usb_device_properties *props,
- struct dvb_usb_device_description **desc, int *cold)
+static struct ec100_config ec168_ec100_config = {
+ .demod_address = 0xff, /* not real address, demod is integrated */
+};
+
+static int ec168_ec100_frontend_attach(struct dvb_usb_adapter *adap)
{
- int ret;
- u8 reply;
- struct ec168_req req = {GET_CONFIG, 0, 1, sizeof(reply), &reply};
deb_info("%s:\n", __func__);
+ adap->fe[0] = dvb_attach(ec100_attach, &ec168_ec100_config,
+ &adap->dev->i2c_adap);
+ if (adap->fe[0] == NULL)
+ return -ENODEV;
- ret = ec168_rw_udev(udev, &req);
- if (ret)
- goto error;
-
- deb_info("%s: reply:%02x\n", __func__, reply);
-
- if (reply == 0x01)
- *cold = 0;
- else
- *cold = 1;
-
- return ret;
-error:
- deb_info("%s: failed:%d\n", __func__, ret);
- return ret;
+ return 0;
}
-/* DVB USB Driver stuff */
-static struct dvb_usb_device_properties ec168_properties;
+static struct mxl5005s_config ec168_mxl5003s_config = {
+ .i2c_address = 0xc6,
+ .if_freq = IF_FREQ_4570000HZ,
+ .xtal_freq = CRYSTAL_FREQ_16000000HZ,
+ .agc_mode = MXL_SINGLE_AGC,
+ .tracking_filter = MXL_TF_OFF,
+ .rssi_enable = MXL_RSSI_ENABLE,
+ .cap_select = MXL_CAP_SEL_ENABLE,
+ .div_out = MXL_DIV_OUT_4,
+ .clock_out = MXL_CLOCK_OUT_DISABLE,
+ .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM,
+ .top = MXL5005S_TOP_25P2,
+ .mod_mode = MXL_DIGITAL_MODE,
+ .if_mode = MXL_ZERO_IF,
+ .AgcMasterByte = 0x00,
+};
-static int ec168_probe(struct usb_interface *intf,
- const struct usb_device_id *id)
+static int ec168_mxl5003s_tuner_attach(struct dvb_usb_adapter *adap)
{
- int ret;
- deb_info("%s: interface:%d\n", __func__,
- intf->cur_altsetting->desc.bInterfaceNumber);
-
- ret = dvb_usb_device_init(intf, &ec168_properties, THIS_MODULE, NULL,
- adapter_nr);
- if (ret)
- goto error;
-
- return ret;
-error:
- deb_info("%s: failed:%d\n", __func__, ret);
- return ret;
+ deb_info("%s:\n", __func__);
+ return dvb_attach(mxl5005s_attach, adap->fe[0],
+ &adap->dev->i2c_adap,
+ &ec168_mxl5003s_config) == NULL ? -ENODEV : 0;
}
-#define E3C_EC168_1689 0
-#define E3C_EC168_FFFA 1
-#define E3C_EC168_FFFB 2
-#define E3C_EC168_1001 3
-#define E3C_EC168_1002 4
-
-static struct usb_device_id ec168_id[] = {
- [E3C_EC168_1689] =
- {USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168)},
- [E3C_EC168_FFFA] =
- {USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_2)},
- [E3C_EC168_FFFB] =
- {USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_3)},
- [E3C_EC168_1001] =
- {USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_4)},
- [E3C_EC168_1002] =
- {USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_5)},
- {} /* terminating entry */
-};
-
-MODULE_DEVICE_TABLE(usb, ec168_id);
+static int ec168_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
+{
+ struct ec168_req req = {STREAMING_CTRL, 0x7f01, 0x0202, 0, NULL};
+ deb_info("%s: onoff:%d\n", __func__, onoff);
+ if (onoff)
+ req.index = 0x0102;
+ return ec168_ctrl_msg(adap->dev, &req);
+}
-static struct dvb_usb_device_properties ec168_properties = {
- .caps = DVB_USB_IS_AN_I2C_ADAPTER,
+/* DVB USB Driver stuff */
+/* bInterfaceNumber 0 is HID
+ * bInterfaceNumber 1 is DVB-T */
+static struct dvb_usb_device_properties ec168_props = {
+ .driver_name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+ .adapter_nr = adapter_nr,
+ .bInterfaceNumber = 1,
- .usb_ctrl = DEVICE_SPECIFIC,
- .download_firmware = ec168_download_firmware,
+ .identify_state = ec168_identify_state,
.firmware = "dvb-usb-ec168.fw",
- .no_reconnect = 1,
+ .download_firmware = ec168_download_firmware,
- .size_of_priv = 0,
+ .i2c_algo = &ec168_i2c_algo,
+ .frontend_attach = ec168_ec100_frontend_attach,
+ .tuner_attach = ec168_mxl5003s_tuner_attach,
+ .streaming_ctrl = ec168_streaming_ctrl,
.num_adapters = 1,
.adapter = {
{
- .num_frontends = 1,
- .fe = {{
- .streaming_ctrl = ec168_streaming_ctrl,
- .frontend_attach = ec168_ec100_frontend_attach,
- .tuner_attach = ec168_mxl5003s_tuner_attach,
.stream = {
.type = USB_BULK,
.count = 6,
}
}
},
- }},
}
},
+};
- .identify_state = ec168_identify_state,
-
- .i2c_algo = &ec168_i2c_algo,
+static const struct dvb_usb_driver_info ec168_driver_info = {
+ .name = "E3C EC168 reference design",
+ .props = &ec168_props,
+};
- .num_device_descs = 1,
- .devices = {
- {
- .name = "E3C EC168 DVB-T USB2.0 reference design",
- .cold_ids = {
- &ec168_id[E3C_EC168_1689],
- &ec168_id[E3C_EC168_FFFA],
- &ec168_id[E3C_EC168_FFFB],
- &ec168_id[E3C_EC168_1001],
- &ec168_id[E3C_EC168_1002],
- NULL},
- .warm_ids = {NULL},
- },
- }
+static const struct usb_device_id ec168_id[] = {
+ { USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168),
+ .driver_info = (kernel_ulong_t) &ec168_driver_info },
+ { USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_2),
+ .driver_info = (kernel_ulong_t) &ec168_driver_info },
+ { USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_3),
+ .driver_info = (kernel_ulong_t) &ec168_driver_info },
+ { USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_4),
+ .driver_info = (kernel_ulong_t) &ec168_driver_info },
+ { USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_5),
+ .driver_info = (kernel_ulong_t) &ec168_driver_info },
+ {}
};
+MODULE_DEVICE_TABLE(usb, ec168_id);
static struct usb_driver ec168_driver = {
- .name = "dvb_usb_ec168",
- .probe = ec168_probe,
- .disconnect = dvb_usb_device_exit,
- .id_table = ec168_id,
+ .name = KBUILD_MODNAME,
+ .id_table = ec168_id,
+ .probe = dvb_usbv2_probe,
+ .disconnect = dvb_usbv2_disconnect,
+ .suspend = dvb_usbv2_suspend,
+ .resume = dvb_usbv2_resume,
+ .no_dynamic_id = 1,
+ .soft_unbind = 1,
};
module_usb_driver(ec168_driver);
projects / openwrt / staging / blogic.git / commitdiff