Staging:dgap: Fix Macros with complex values should be enclosed in dgap.h

Fix checkpatch.pl issues with macros with complex
values should be enclosed in dgap.h

Signed-off-by: Ebru Akagunduz <ebru.akagunduz@gmail.com>
Reviewed-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/dgap/dgap.h b/drivers/staging/dgap/dgap.h
index f0a2e62d917a75a05214109670125850404a035b..faa9b13c7d3042bab8d4672f067d578441fb8157 100644 (file)
--- a/drivers/staging/dgap/dgap.h
+++ b/drivers/staging/dgap/dgap.h
@@ -768,8 +768,8 @@ struct un_t {
 
 #if !defined(TIOCMODG)
 
-#define        TIOCMODG        ('d'<<8) | 250          /* get modem ctrl state */
-#define        TIOCMODS        ('d'<<8) | 251          /* set modem ctrl state */
+#define        TIOCMODG        (('d'<<8) | 250)                /* get modem ctrl state */
+#define        TIOCMODS        (('d'<<8) | 251)                /* set modem ctrl state */
 
 #ifndef TIOCM_LE
 #define                TIOCM_LE        0x01            /* line enable          */
@@ -788,44 +788,44 @@ struct un_t {
 #endif
 
 #if !defined(TIOCMSET)
-#define        TIOCMSET        ('d'<<8) | 252          /* set modem ctrl state */
-#define        TIOCMGET        ('d'<<8) | 253          /* set modem ctrl state */
+#define        TIOCMSET        (('d'<<8) | 252)                /* set modem ctrl state */
+#define        TIOCMGET        (('d'<<8) | 253)                /* set modem ctrl state */
 #endif
 
 #if !defined(TIOCMBIC)
-#define        TIOCMBIC        ('d'<<8) | 254          /* set modem ctrl state */
-#define        TIOCMBIS        ('d'<<8) | 255          /* set modem ctrl state */
+#define        TIOCMBIC        (('d'<<8) | 254)                /* set modem ctrl state */
+#define        TIOCMBIS        (('d'<<8) | 255)                /* set modem ctrl state */
 #endif
 
 
 #if !defined(TIOCSDTR)
-#define        TIOCSDTR        ('e'<<8) | 0            /* set DTR              */
-#define        TIOCCDTR        ('e'<<8) | 1            /* clear DTR            */
+#define        TIOCSDTR        (('e'<<8) | 0)          /* set DTR              */
+#define        TIOCCDTR        (('e'<<8) | 1)          /* clear DTR            */
 #endif
 
 /************************************************************************
  * Ioctl command arguments for DIGI parameters.
  ************************************************************************/
-#define DIGI_GETA      ('e'<<8) | 94           /* Read params          */
+#define DIGI_GETA      (('e'<<8) | 94)         /* Read params          */
 
-#define DIGI_SETA      ('e'<<8) | 95           /* Set params           */
-#define DIGI_SETAW     ('e'<<8) | 96           /* Drain & set params   */
-#define DIGI_SETAF     ('e'<<8) | 97           /* Drain, flush & set params */
+#define DIGI_SETA      (('e'<<8) | 95)         /* Set params           */
+#define DIGI_SETAW     (('e'<<8) | 96)         /* Drain & set params   */
+#define DIGI_SETAF     (('e'<<8) | 97)         /* Drain, flush & set params */
 
-#define DIGI_KME       ('e'<<8) | 98           /* Read/Write Host      */
+#define DIGI_KME       (('e'<<8) | 98)         /* Read/Write Host      */
                                                /* Adapter Memory       */
 
-#define        DIGI_GETFLOW    ('e'<<8) | 99           /* Get startc/stopc flow */
+#define        DIGI_GETFLOW    (('e'<<8) | 99)         /* Get startc/stopc flow */
                                                /* control characters    */
-#define        DIGI_SETFLOW    ('e'<<8) | 100          /* Set startc/stopc flow */
+#define        DIGI_SETFLOW    (('e'<<8) | 100)                /* Set startc/stopc flow */
                                                /* control characters    */
-#define        DIGI_GETAFLOW   ('e'<<8) | 101          /* Get Aux. startc/stopc */
+#define        DIGI_GETAFLOW   (('e'<<8) | 101)                /* Get Aux. startc/stopc */
                                                /* flow control chars    */
-#define        DIGI_SETAFLOW   ('e'<<8) | 102          /* Set Aux. startc/stopc */
+#define        DIGI_SETAFLOW   (('e'<<8) | 102)                /* Set Aux. startc/stopc */
                                                /* flow control chars    */
 
-#define DIGI_GEDELAY   ('d'<<8) | 246          /* Get edelay */
-#define DIGI_SEDELAY   ('d'<<8) | 247          /* Set edelay */
+#define DIGI_GEDELAY   (('d'<<8) | 246)                /* Get edelay */
+#define DIGI_SEDELAY   (('d'<<8) | 247)                /* Set edelay */
 
 struct digiflow_t {
        unsigned char   startc;                         /* flow cntl start char */
@@ -834,8 +834,8 @@ struct      digiflow_t {
 
 
 #ifdef FLOW_2200
-#define        F2200_GETA      ('e'<<8) | 104          /* Get 2x36 flow cntl flags */
-#define        F2200_SETAW     ('e'<<8) | 105          /* Set 2x36 flow cntl flags */
+#define        F2200_GETA      (('e'<<8) | 104)                /* Get 2x36 flow cntl flags */
+#define        F2200_SETAW     (('e'<<8) | 105)                /* Set 2x36 flow cntl flags */
 #define                F2200_MASK      0x03            /* 2200 flow cntl bit mask  */
 #define                FCNTL_2200      0x01            /* 2x36 terminal flow cntl  */
 #define                PCNTL_2200      0x02            /* 2x36 printer flow cntl   */
@@ -971,7 +971,7 @@ struct digi_dinfo {
        char            dinfo_version[16];      /* driver version       */
 };
 
-#define        DIGI_GETDD      ('d'<<8) | 248          /* get driver info      */
+#define        DIGI_GETDD      (('d'<<8) | 248)                /* get driver info      */
 
 /************************************************************************
  * Structure used with ioctl commands for per-board information
@@ -991,7 +991,7 @@ struct digi_info {
        char            info_reserved[7];       /* for future expansion    */
 };
 
-#define        DIGI_GETBD      ('d'<<8) | 249          /* get board info          */
+#define        DIGI_GETBD      (('d'<<8) | 249)                /* get board info          */
 
 struct digi_stat {
        unsigned int    info_chan;              /* Channel number (0 based)  */
@@ -1006,7 +1006,7 @@ struct digi_stat {
        unsigned long   info_reserved[8];       /* for future expansion    */
 };
 
-#define        DIGI_GETSTAT    ('d'<<8) | 244          /* get board info          */
+#define        DIGI_GETSTAT    (('d'<<8) | 244)                /* get board info          */
 /************************************************************************
  *
  * Structure used with ioctl commands for per-channel information
@@ -1049,7 +1049,7 @@ struct digi_cmd {
 #define INFO_CH_WLOW   0x0020
 #define INFO_XXBUF_BUSY 0x0040
 
-#define        DIGI_GETCH      ('d'<<8) | 245          /* get board info          */
+#define        DIGI_GETCH      (('d'<<8) | 245)                /* get board info          */
 
 /* Board type definitions */
 
@@ -1094,12 +1094,12 @@ struct digi_cmd {
 #define BD_TRIBOOT     0x8
 #define        BD_BADKME       0x80
 
-#define DIGI_LOOPBACK        ('d'<<8) | 252            /* Enable/disable UART internal loopback */
-#define DIGI_SPOLL            ('d'<<8) | 254           /* change poller rate   */
+#define DIGI_LOOPBACK        (('d'<<8) | 252)          /* Enable/disable UART internal loopback */
+#define DIGI_SPOLL            (('d'<<8) | 254)         /* change poller rate   */
 
 #define DIGI_SETCUSTOMBAUD     _IOW('e', 106, int)     /* Set integer baud rate */
 #define DIGI_GETCUSTOMBAUD     _IOR('e', 107, int)     /* Get integer baud rate */
-#define DIGI_RESET_PORT                ('e'<<8) | 93           /* Reset port           */
+#define DIGI_RESET_PORT                (('e'<<8) | 93)         /* Reset port           */
 
 /************************************************************************
  * Channel information structure.