--- /dev/null
+#
+# Yangfl <mmyangfl@gmail.com>, 2018.
+#
+msgid ""
+msgstr ""
+"Content-Type: text/plain; charset=UTF-8\n"
+"Last-Translator: Yangfl <mmyangfl@gmail.com>\n"
+"Language-Team: <debian-l10n-chinese@lists.debian.org>\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+"PO-Revision-Date: 2018-08-17 15:17+0800\n"
+"X-Generator: Gtranslator 2.91.7\n"
+
+msgid ""
+"'AUTO' selects the highest protocol version that client and server support."
+msgstr "“AUTO”选择客户端和服务器支持的最高协议版本。"
+
+msgid ""
+"'Hostname:Port' or 'IPv4:Port' or '[IPv6]:Port' Radicale should listen on"
+msgstr "Radicale 应监听的“主机名:端口”或“IPv4:端口”或“[IPv6]:端口”"
+
+msgid "AUTO"
+msgstr "自动"
+
+msgid "Access-Control-Allow-Headers"
+msgstr "Access-Control-Allow-Headers"
+
+msgid "Access-Control-Allow-Methods"
+msgstr "Access-Control-Allow-Methods"
+
+msgid "Access-Control-Allow-Origin"
+msgstr "Access-Control-Allow-Origin"
+
+msgid "Access-Control-Expose-Headers"
+msgstr "Access-Control-Expose-Headers"
+
+msgid "Additional HTTP headers"
+msgstr "其他 HTTP 标头"
+
+msgid "Address:Port"
+msgstr "地址:端口"
+
+msgid "Authentication"
+msgstr "认证"
+
+msgid ""
+"Authentication login is matched against the 'user' key, and collection's "
+"path is matched against the 'collection' key."
+msgstr "身份验证登录将用“user”键值匹配，集合的路径将用“collection”键值匹配。"
+
+msgid "Authentication method"
+msgstr "身份验证方法"
+
+msgid "Authentication method to allow access to Radicale server."
+msgstr "允许访问 Radicale 服务器的身份验证方法。"
+
+msgid "Auto-start"
+msgstr "自动启动"
+
+msgid "Boot delay"
+msgstr "启动延迟"
+
+msgid "CalDAV/CardDAV"
+msgstr "CalDAV/CardDAV"
+
+msgid ""
+"Calendars and address books are available for both local and remote access, "
+"possibly limited through authentication policies."
+msgstr "日历和地址簿可以通过本地或远程访问，且可以通过身份验证策略加以限制。"
+
+msgid "Certificate file"
+msgstr "证书文件"
+
+msgid ""
+"Change here the encoding Radicale will use instead of 'UTF-8' for responses "
+"to the client and/or to store data inside collections."
+msgstr ""
+"在这里更改 Radicale 响应客户端和/或在集合中存储数据将使用的编码，而不是默认"
+"的“UTF-8”。"
+
+msgid "Ciphers"
+msgstr "加密算法"
+
+msgid "Console Log level"
+msgstr "控制台日志级别"
+
+msgid "Control the access to data collections."
+msgstr "控制对数据集合的访问。"
+
+msgid "Critical"
+msgstr "关键"
+
+msgid ""
+"Cross-origin resource sharing (CORS) is a mechanism that allows restricted "
+"resources (e.g. fonts, JavaScript, etc.) on a web page to be requested from "
+"another domain outside the domain from which the resource originated."
+msgstr ""
+"跨域资源共享（CORS）是一种机制，允许源自资源域外的另一个域请求网页上的受限资"
+"源（如字体，JavaScript等）。"
+
+msgid "Custom"
+msgstr "自定义"
+
+msgid "Database"
+msgstr "数据库"
+
+msgid "Debug"
+msgstr "调试"
+
+msgid "Delay (in seconds) during system boot before Radicale start"
+msgstr "系统启动时 Radicale 启动前延迟（秒）"
+
+msgid "Directory"
+msgstr "目录"
+
+msgid "Directory not exists/found !"
+msgstr "目录不存在/未找到！"
+
+msgid "Directory required !"
+msgstr "需要目录！"
+
+msgid "Directory where the rotating log-files are stored"
+msgstr "存储旋转日志文件的目录"
+
+msgid "During delay ifup-events are not monitored !"
+msgstr "在延迟期间，ifup-events 不受监控！"
+
+msgid "Enable HTTPS"
+msgstr "启用 HTTPS"
+
+msgid ""
+"Enable/Disable auto-start of Radicale on system start-up and interface events"
+msgstr "在系统启动和接口事件上启用/禁用 Radicale 的自动启动"
+
+msgid "Encoding"
+msgstr "编码"
+
+msgid "Encoding for responding requests."
+msgstr "用于响应请求的编码。"
+
+msgid "Encoding for storing local collections."
+msgstr "用于本地集合存储的编码。"
+
+msgid "Encryption method"
+msgstr "加密方法"
+
+msgid "Error"
+msgstr "错误"
+
+msgid "File '%s' not found !"
+msgstr "文件“%s”没有找到"
+
+msgid "File Log level"
+msgstr "文件日志级别"
+
+msgid "File not found !"
+msgstr "找不到文件 "
+
+msgid "File-system"
+msgstr "文件系统"
+
+msgid ""
+"For example, for the 'user' key, '.+' means 'authenticated user' and '.*' "
+"means 'anybody' (including anonymous users)."
+msgstr ""
+"例如，对于“用户”键，“.+”表示“经过身份验证的用户”，“.*”表示“任何人”（包括匿名"
+"用户）。"
+
+msgid "Full access for Owner only"
+msgstr "完全访问权限仅限所有者"
+
+msgid "Full access for authenticated Users"
+msgstr "完全访问权限包括已验证身份用户"
+
+msgid "Full access for everybody (including anonymous)"
+msgstr "完全访问权限授予所有人（包括匿名）"
+
+msgid "Full path and file name of certificate"
+msgstr "证书的完整路径和文件名"
+
+msgid "Full path and file name of private key"
+msgstr "私钥的完整路径和文件名"
+
+msgid "Info"
+msgstr "信息"
+
+msgid "Keep in mind to use the correct hashing algorithm !"
+msgstr "请记住使用正确的散列算法！"
+
+msgid "Leading or ending slashes are trimmed from collection's path."
+msgstr "将会去除集合路径中的前导或结束斜杠。"
+
+msgid "Log-backup Count"
+msgstr "日志备份计数"
+
+msgid "Log-file Viewer"
+msgstr "日志文件查看器"
+
+msgid "Log-file directory"
+msgstr "日志文件目录"
+
+msgid "Log-file size"
+msgstr "日志文件大小"
+
+msgid "Logging"
+msgstr "日志"
+
+msgid "Logon message"
+msgstr "登录消息"
+
+msgid "Maximum size of each rotation log-file."
+msgstr "每个旋转日志文件的最大大小。"
+
+msgid "Message displayed in the client when a password is needed."
+msgstr "需要密码时，客户端中显示的消息。"
+
+msgid "NOT installed"
+msgstr "未安装"
+
+msgid "None"
+msgstr "无"
+
+msgid "Number of backup files of log to create."
+msgstr "要创建的日志备份文件数。"
+
+msgid "OPTIONAL: See python's ssl module for available ciphers"
+msgstr "可选：请参阅 python 的 ssl 模块以获取可用的加密算法"
+
+msgid "One or more missing/invalid fields on tab"
+msgstr "选项卡上的一个或多个字段缺失/无效"
+
+msgid "Owner allow write, authenticated users allow read"
+msgstr "所有者允许写入，认证用户允许读取"
+
+msgid "Path/File required !"
+msgstr "需要路径/文件！"
+
+msgid ""
+"Place here the 'user:password' pairs for your users which should have access "
+"to Radicale."
+msgstr "在这里为您的用户设置“用户:密码”对，这些用户可以访问 Radicale。"
+
+msgid "Please install current version !"
+msgstr "请安装最新版本！"
+
+msgid "Please press [Reload] button below to reread the file."
+msgstr "请按下面的[刷新]按钮重新读取文件。"
+
+msgid "Please update to current version !"
+msgstr "请更新到当前版本！"
+
+msgid "Port numbers below 1024 (Privileged ports) are not supported"
+msgstr "不支持低于 1024 的端口号（特权端口）"
+
+msgid "Private key file"
+msgstr "私钥文件"
+
+msgid "Radicale CalDAV/CardDAV Server"
+msgstr "Radicale CalDAV/CardDAV 服务器"
+
+msgid "Radicale uses '/etc/radicale/rights' as regexp-based file."
+msgstr "Radicale 使用“/etc/radicale/rights”作为正则表达式文件。"
+
+msgid "Radicale uses '/etc/radicale/users' as htpasswd file."
+msgstr "Radicale 使用“/etc/radicale/users”作为 htpasswd 文件。"
+
+msgid "Read only!"
+msgstr "只读。"
+
+msgid "RegExp file"
+msgstr "正则表达式文件"
+
+msgid "Reload"
+msgstr "刷新"
+
+msgid "Response Encoding"
+msgstr "响应编码"
+
+msgid "Rights"
+msgstr "权限"
+
+msgid "Rights are based on a regexp-based file"
+msgstr "权限基于正则表达式文件"
+
+msgid "Rights backend"
+msgstr "权限后端"
+
+msgid "SHA-1"
+msgstr "SHA-1"
+
+msgid "SSL Protocol"
+msgstr "SSL 协议"
+
+msgid "Save"
+msgstr "保存"
+
+msgid "Section names are only used for naming the rule."
+msgstr "章节名称仅用于命名规则。"
+
+msgid "Server"
+msgstr "服务器"
+
+msgid "Setting this parameter to '0' will disable rotation of log-file."
+msgstr "将此参数设置为“0”将禁用日志文件的旋转。"
+
+msgid "Software package '%s' is not installed."
+msgstr "未安装软件包“%s”。"
+
+msgid "Software package '%s' is outdated."
+msgstr "软件包“%s”已过时。"
+
+msgid "Software update required"
+msgstr "需要软件更新"
+
+msgid "Start"
+msgstr "开始"
+
+msgid "Start / Stop"
+msgstr "启动 / 停止"
+
+msgid "Start/Stop Radicale server"
+msgstr "启动/停止 Radicale 服务器"
+
+msgid "Storage"
+msgstr "存储"
+
+msgid "Storage Encoding"
+msgstr "存储编码"
+
+msgid "Storage backend"
+msgstr "存储后端"
+
+msgid "Syslog Log level"
+msgstr "系统日志级别"
+
+msgid "System"
+msgstr "系统"
+
+msgid ""
+"The Radicale Project is a complete CalDAV (calendar) and CardDAV (contact) "
+"server solution."
+msgstr ""
+"Radicale 项目是一个完整的 CalDAV（日历）和 CardDAV（联系人）服务器解决方案。"
+
+msgid ""
+"They can be viewed and edited by calendar and contact clients on mobile "
+"phones or computers."
+msgstr "可以通过手机或计算机上的日历和联系人客户查看和编辑它们。"
+
+msgid "To edit the file follow this link!"
+msgstr "要编辑文件，请点击此链接！"
+
+msgid "To view latest log file follow this link!"
+msgstr "要查看最新的日志文件，请点击此链接！"
+
+msgid "Value is not a number"
+msgstr "值不是数字"
+
+msgid "Value is not an Integer >= 0 !"
+msgstr "值不是非负整数！"
+
+msgid "Value not between 0 and 300"
+msgstr "值不在 0 到 300 之间"
+
+msgid "Value required ! Integer >= 0 !"
+msgstr "需要负整数值！"
+
+msgid "Version"
+msgstr "版本"
+
+msgid "Version Information"
+msgstr "版本信息"
+
+msgid ""
+"WARNING: Only 'File-system' is documented and tested by Radicale development"
+msgstr "警告：只有“文件系统”选项受 Radicale 开发人员测试和支持"
+
+msgid "Warning"
+msgstr "警告"
+
+msgid ""
+"You can also get groups from the user regex in the collection with {0}, {1}, "
+"etc."
+msgstr "您还可以使用 {0}、{1} 等从集合中的用户正则表达式获取组。"
+
+msgid ""
+"You can use Python's ConfigParser interpolation values %(login)s and "
+"%(path)s."
+msgstr "您可以使用 Python ConfigParser 的格式化变量 %(login)s 和 %(path)s。"
+
+msgid "crypt"
+msgstr "加密"
+
+msgid "custom"
+msgstr "自定义"
+
+msgid "htpasswd file"
+msgstr "htpasswd 文件"
+
+msgid "installed"
+msgstr "安装 "
+
+msgid "no valid path given!"
+msgstr "没有给出有效路径！"
+
+msgid "or higher"
+msgstr "或更高"
+
+msgid "plain"
+msgstr "明文"
+
+msgid "required"
+msgstr "需要"
+
+msgid "salted SHA-1"
+msgstr "盐化 SHA-1"
--- /dev/null
+#
+# Yangfl <mmyangfl@gmail.com>, 2018.
+#
+msgid ""
+msgstr ""
+"Content-Type: text/plain; charset=UTF-8\n"
+"Last-Translator: Yangfl <mmyangfl@gmail.com>\n"
+"Language-Team: <debian-l10n-chinese@lists.debian.org>\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+"PO-Revision-Date: 2018-08-17 15:18+0800\n"
+"X-Generator: Gtranslator 2.91.7\n"
+
+msgid ""
+"'AUTO' selects the highest protocol version that client and server support."
+msgstr "“AUTO”選擇客戶端和伺服器支援的最高協議版本。"
+
+msgid ""
+"'Hostname:Port' or 'IPv4:Port' or '[IPv6]:Port' Radicale should listen on"
+msgstr "Radicale 應監聽的“主機名:埠”或“IPv4:埠”或“[IPv6]:埠”"
+
+msgid "AUTO"
+msgstr "自動"
+
+msgid "Access-Control-Allow-Headers"
+msgstr "Access-Control-Allow-Headers"
+
+msgid "Access-Control-Allow-Methods"
+msgstr "Access-Control-Allow-Methods"
+
+msgid "Access-Control-Allow-Origin"
+msgstr "Access-Control-Allow-Origin"
+
+msgid "Access-Control-Expose-Headers"
+msgstr "Access-Control-Expose-Headers"
+
+msgid "Additional HTTP headers"
+msgstr "其他 HTTP 標頭"
+
+msgid "Address:Port"
+msgstr "地址:埠"
+
+msgid "Authentication"
+msgstr "認證"
+
+msgid ""
+"Authentication login is matched against the 'user' key, and collection's "
+"path is matched against the 'collection' key."
+msgstr "身份驗證登入將用“user”鍵值匹配，集合的路徑將用“collection”鍵值匹配。"
+
+msgid "Authentication method"
+msgstr "身份驗證方法"
+
+msgid "Authentication method to allow access to Radicale server."
+msgstr "允許訪問 Radicale 伺服器的身份驗證方法。"
+
+msgid "Auto-start"
+msgstr "自動啟動"
+
+msgid "Boot delay"
+msgstr "啟動延遲"
+
+msgid "CalDAV/CardDAV"
+msgstr "CalDAV/CardDAV"
+
+msgid ""
+"Calendars and address books are available for both local and remote access, "
+"possibly limited through authentication policies."
+msgstr "日曆和地址簿可以通過本地或遠端訪問，且可以通過身份驗證策略加以限制。"
+
+msgid "Certificate file"
+msgstr "證書檔案"
+
+msgid ""
+"Change here the encoding Radicale will use instead of 'UTF-8' for responses "
+"to the client and/or to store data inside collections."
+msgstr ""
+"在這裡更改 Radicale 響應客戶端和/或在集合中儲存資料將使用的編碼，而不是預設"
+"的“UTF-8”。"
+
+msgid "Ciphers"
+msgstr "加密演算法"
+
+msgid "Console Log level"
+msgstr "控制檯日誌級別"
+
+msgid "Control the access to data collections."
+msgstr "控制對資料集合的訪問。"
+
+msgid "Critical"
+msgstr "關鍵"
+
+msgid ""
+"Cross-origin resource sharing (CORS) is a mechanism that allows restricted "
+"resources (e.g. fonts, JavaScript, etc.) on a web page to be requested from "
+"another domain outside the domain from which the resource originated."
+msgstr ""
+"跨域資源共享（CORS）是一種機制，允許源自資源域外的另一個域請求網頁上的受限資"
+"源（如字型，JavaScript等）。"
+
+msgid "Custom"
+msgstr "自定義"
+
+msgid "Database"
+msgstr "資料庫"
+
+msgid "Debug"
+msgstr "除錯"
+
+msgid "Delay (in seconds) during system boot before Radicale start"
+msgstr "系統啟動時 Radicale 啟動前延遲（秒）"
+
+msgid "Directory"
+msgstr "目錄"
+
+msgid "Directory not exists/found !"
+msgstr "目錄不存在/未找到！"
+
+msgid "Directory required !"
+msgstr "需要目錄！"
+
+msgid "Directory where the rotating log-files are stored"
+msgstr "儲存旋轉日誌檔案的目錄"
+
+msgid "During delay ifup-events are not monitored !"
+msgstr "在延遲期間，ifup-events 不受監控！"
+
+msgid "Enable HTTPS"
+msgstr "啟用 HTTPS"
+
+msgid ""
+"Enable/Disable auto-start of Radicale on system start-up and interface events"
+msgstr "在系統啟動和介面事件上啟用/禁用 Radicale 的自動啟動"
+
+msgid "Encoding"
+msgstr "編碼"
+
+msgid "Encoding for responding requests."
+msgstr "用於響應請求的編碼。"
+
+msgid "Encoding for storing local collections."
+msgstr "用於本地集合儲存的編碼。"
+
+msgid "Encryption method"
+msgstr "加密方法"
+
+msgid "Error"
+msgstr "錯誤"
+
+msgid "File '%s' not found !"
+msgstr "檔案“%s”沒有找到"
+
+msgid "File Log level"
+msgstr "檔案日誌級別"
+
+msgid "File not found !"
+msgstr "找不到檔案 "
+
+msgid "File-system"
+msgstr "檔案系統"
+
+msgid ""
+"For example, for the 'user' key, '.+' means 'authenticated user' and '.*' "
+"means 'anybody' (including anonymous users)."
+msgstr ""
+"例如，對於“使用者”鍵，“.+”表示“經過身份驗證的使用者”，“.*”表示“任何人”（包括"
+"匿名使用者）。"
+
+msgid "Full access for Owner only"
+msgstr "完全訪問許可權僅限所有者"
+
+msgid "Full access for authenticated Users"
+msgstr "完全訪問許可權包括已驗證身份使用者"
+
+msgid "Full access for everybody (including anonymous)"
+msgstr "完全訪問許可權授予所有人（包括匿名）"
+
+msgid "Full path and file name of certificate"
+msgstr "證書的完整路徑和檔名"
+
+msgid "Full path and file name of private key"
+msgstr "私鑰的完整路徑和檔名"
+
+msgid "Info"
+msgstr "資訊"
+
+msgid "Keep in mind to use the correct hashing algorithm !"
+msgstr "請記住使用正確的雜湊演算法！"
+
+msgid "Leading or ending slashes are trimmed from collection's path."
+msgstr "將會去除集合路徑中的前導或結束斜槓。"
+
+msgid "Log-backup Count"
+msgstr "日誌備份計數"
+
+msgid "Log-file Viewer"
+msgstr "日誌檔案檢視器"
+
+msgid "Log-file directory"
+msgstr "日誌檔案目錄"
+
+msgid "Log-file size"
+msgstr "日誌檔案大小"
+
+msgid "Logging"
+msgstr "日誌"
+
+msgid "Logon message"
+msgstr "登入訊息"
+
+msgid "Maximum size of each rotation log-file."
+msgstr "每個旋轉日誌檔案的最大大小。"
+
+msgid "Message displayed in the client when a password is needed."
+msgstr "需要密碼時，客戶端中顯示的訊息。"
+
+msgid "NOT installed"
+msgstr "未安裝"
+
+msgid "None"
+msgstr "無"
+
+msgid "Number of backup files of log to create."
+msgstr "要建立的日誌備份檔案數。"
+
+msgid "OPTIONAL: See python's ssl module for available ciphers"
+msgstr "可選：請參閱 python 的 ssl 模組以獲取可用的加密演算法"
+
+msgid "One or more missing/invalid fields on tab"
+msgstr "選項卡上的一個或多個欄位缺失/無效"
+
+msgid "Owner allow write, authenticated users allow read"
+msgstr "所有者允許寫入，認證使用者允許讀取"
+
+msgid "Path/File required !"
+msgstr "需要路徑/檔案！"
+
+msgid ""
+"Place here the 'user:password' pairs for your users which should have access "
+"to Radicale."
+msgstr "在這裡為您的使用者設定“使用者:密碼”對，這些使用者可以訪問 Radicale。"
+
+msgid "Please install current version !"
+msgstr "請安裝最新版本！"
+
+msgid "Please press [Reload] button below to reread the file."
+msgstr "請按下面的[重新整理]按鈕重新讀取檔案。"
+
+msgid "Please update to current version !"
+msgstr "請更新到當前版本！"
+
+msgid "Port numbers below 1024 (Privileged ports) are not supported"
+msgstr "不支援低於 1024 的埠號（特權埠）"
+
+msgid "Private key file"
+msgstr "私鑰檔案"
+
+msgid "Radicale CalDAV/CardDAV Server"
+msgstr "Radicale CalDAV/CardDAV 伺服器"
+
+msgid "Radicale uses '/etc/radicale/rights' as regexp-based file."
+msgstr "Radicale 使用“/etc/radicale/rights”作為正則表示式檔案。"
+
+msgid "Radicale uses '/etc/radicale/users' as htpasswd file."
+msgstr "Radicale 使用“/etc/radicale/users”作為 htpasswd 檔案。"
+
+msgid "Read only!"
+msgstr "只讀。"
+
+msgid "RegExp file"
+msgstr "正則表示式檔案"
+
+msgid "Reload"
+msgstr "重新整理"
+
+msgid "Response Encoding"
+msgstr "響應編碼"
+
+msgid "Rights"
+msgstr "許可權"
+
+msgid "Rights are based on a regexp-based file"
+msgstr "許可權基於正則表示式檔案"
+
+msgid "Rights backend"
+msgstr "許可權後端"
+
+msgid "SHA-1"
+msgstr "SHA-1"
+
+msgid "SSL Protocol"
+msgstr "SSL 協議"
+
+msgid "Save"
+msgstr "儲存"
+
+msgid "Section names are only used for naming the rule."
+msgstr "章節名稱僅用於命名規則。"
+
+msgid "Server"
+msgstr "伺服器"
+
+msgid "Setting this parameter to '0' will disable rotation of log-file."
+msgstr "將此引數設定為“0”將禁用日誌檔案的旋轉。"
+
+msgid "Software package '%s' is not installed."
+msgstr "未安裝軟體包“%s”。"
+
+msgid "Software package '%s' is outdated."
+msgstr "軟體包“%s”已過時。"
+
+msgid "Software update required"
+msgstr "需要軟體更新"
+
+msgid "Start"
+msgstr "開始"
+
+msgid "Start / Stop"
+msgstr "啟動 / 停止"
+
+msgid "Start/Stop Radicale server"
+msgstr "啟動/停止 Radicale 伺服器"
+
+msgid "Storage"
+msgstr "儲存"
+
+msgid "Storage Encoding"
+msgstr "儲存編碼"
+
+msgid "Storage backend"
+msgstr "儲存後端"
+
+msgid "Syslog Log level"
+msgstr "系統日誌級別"
+
+msgid "System"
+msgstr "系統"
+
+msgid ""
+"The Radicale Project is a complete CalDAV (calendar) and CardDAV (contact) "
+"server solution."
+msgstr ""
+"Radicale 專案是一個完整的 CalDAV（日曆）和 CardDAV（聯絡人）伺服器解決方案。"
+
+msgid ""
+"They can be viewed and edited by calendar and contact clients on mobile "
+"phones or computers."
+msgstr "可以通過手機或計算機上的日曆和聯絡人客戶檢視和編輯它們。"
+
+msgid "To edit the file follow this link!"
+msgstr "要編輯檔案，請點選此連結！"
+
+msgid "To view latest log file follow this link!"
+msgstr "要檢視最新的日誌檔案，請點選此連結！"
+
+msgid "Value is not a number"
+msgstr "值不是數字"
+
+msgid "Value is not an Integer >= 0 !"
+msgstr "值不是非負整數！"
+
+msgid "Value not between 0 and 300"
+msgstr "值不在 0 到 300 之間"
+
+msgid "Value required ! Integer >= 0 !"
+msgstr "需要負整數值！"
+
+msgid "Version"
+msgstr "版本"
+
+msgid "Version Information"
+msgstr "版本資訊"
+
+msgid ""
+"WARNING: Only 'File-system' is documented and tested by Radicale development"
+msgstr "警告：只有“檔案系統”選項受 Radicale 開發人員測試和支援"
+
+msgid "Warning"
+msgstr "警告"
+
+msgid ""
+"You can also get groups from the user regex in the collection with {0}, {1}, "
+"etc."
+msgstr "您還可以使用 {0}、{1} 等從集合中的使用者正則表示式獲取組。"
+
+msgid ""
+"You can use Python's ConfigParser interpolation values %(login)s and "
+"%(path)s."
+msgstr "您可以使用 Python ConfigParser 的格式化變數 %(login)s 和 %(path)s。"
+
+msgid "crypt"
+msgstr "加密"
+
+msgid "custom"
+msgstr "自訂"
+
+msgid "htpasswd file"
+msgstr "htpasswd 檔案"
+
+msgid "installed"
+msgstr "安裝 "
+
+msgid "no valid path given!"
+msgstr "沒有給出有效路徑！"
+
+msgid "or higher"
+msgstr "或更高"
+
+msgid "plain"
+msgstr "明文"
+
+msgid "required"
+msgstr "需要"
+
+msgid "salted SHA-1"
+msgstr "鹽化 SHA-1"
--- /dev/null
+#
+# Yangfl <mmyangfl@gmail.com>, 2018.
+#
+msgid ""
+msgstr ""
+"Content-Type: text/plain; charset=UTF-8\n"
+"Last-Translator: Yangfl <mmyangfl@gmail.com>\n"
+"Language-Team: <debian-l10n-chinese@lists.debian.org>\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+"PO-Revision-Date: 2018-08-17 14:52+0800\n"
+"X-Generator: Gtranslator 2.91.7\n"
+
+msgid "Advanced Configuration"
+msgstr "高级配置"
+
+msgid "Basic Configuration"
+msgstr "基本配置"
+
+msgid "Blacklisted Domain URLs"
+msgstr "列入黑名单的域名 URL"
+
+msgid "Blacklisted Domains"
+msgstr "列入黑名单的域名"
+
+msgid "Blacklisted Hosts URLs"
+msgstr "列入黑名单的主机 URL"
+
+msgid "Configuration"
+msgstr "配置"
+
+msgid "Controls system log and console output verbosity"
+msgstr "控制系统日志和控制台输出的详细程度"
+
+msgid "Delay (in seconds) for on-boot start"
+msgstr "开机启动延迟（秒）"
+
+msgid "Disable Debugging"
+msgstr "禁用调试"
+
+msgid "Download time-out (in seconds)"
+msgstr "下载超时（秒）"
+
+msgid "Enable Debugging"
+msgstr "启用调试"
+
+msgid "Enable/Start"
+msgstr "启用/启动"
+
+msgid "Enables debug output to /tmp/simple-adblock.log"
+msgstr "启用到 /tmp/simple-adblock.log 的调试输出"
+
+msgid "Force Router DNS"
+msgstr "强制路由器 DNS"
+
+msgid "Force Router DNS server to all local devices"
+msgstr "强制路由器 DNS 服务所有本地设备"
+
+msgid "Forces Router DNS use on local devices, also known as DNS Hijacking"
+msgstr "强制路由器 DNS 在本地设备上使用，也称为 DNS 劫持"
+
+msgid "Individual domains to be blacklisted"
+msgstr "要列入黑名单的单独域名"
+
+msgid "Individual domains to be whitelisted"
+msgstr "要列入白名单的单独域名"
+
+msgid "LED to indicate status"
+msgstr "LED 指示状态"
+
+msgid "Let local devices use their own DNS servers if set"
+msgstr "如果设置，让本地设备使用自己的 DNS 服务器"
+
+msgid "Output Verbosity Setting"
+msgstr "输出详细程度设置"
+
+msgid "Pick the LED not already used in"
+msgstr "选择尚未使用的 LED"
+
+msgid "Reload"
+msgstr "刷新"
+
+msgid "Run service after set delay on boot"
+msgstr "开机后延迟多少秒运行服务"
+
+msgid "Service Status"
+msgstr "服务状态"
+
+msgid "Service is disabled/stopped"
+msgstr "服务已禁用/已停止"
+
+msgid "Service is enabled/started"
+msgstr "服务已启用/已启动"
+
+msgid "Service started with error"
+msgstr "服务启动时出错"
+
+msgid "Simple AdBlock"
+msgstr "简单 AdBlock"
+
+msgid "Simple AdBlock Settings"
+msgstr "简单 AdBlock 设置"
+
+msgid "Some output"
+msgstr "一些输出"
+
+msgid "Stop the download if it is stalled for set number of seconds"
+msgstr "如果下载停滞设定的秒数后，则停止下载"
+
+msgid "Stop/Disable"
+msgstr "停止/禁用"
+
+msgid "Suppress output"
+msgstr "抑制输出"
+
+msgid "System LED Configuration"
+msgstr "系统 LED 配置"
+
+msgid "URLs to lists of domains to be blacklisted"
+msgstr "黑名单域名列表的 URL"
+
+msgid "URLs to lists of domains to be whitelisted"
+msgstr "白名单域名列表的 URL"
+
+msgid "URLs to lists of hosts to be blacklisted"
+msgstr "黑名单主机列表的 URL"
+
+msgid "Verbose output"
+msgstr "详细输出"
+
+msgid "Whitelist and Blocklist Management"
+msgstr "白名单和黑名单管理"
+
+msgid "Whitelisted Domain URLs"
+msgstr "白名单域名 URL"
+
+msgid "Whitelisted Domains"
+msgstr "白名单域名"
+
+msgid "none"
+msgstr "无"
--- /dev/null
+#
+# Yangfl <mmyangfl@gmail.com>, 2018.
+#
+msgid ""
+msgstr ""
+"Content-Type: text/plain; charset=UTF-8\n"
+"Last-Translator: Yangfl <mmyangfl@gmail.com>\n"
+"Language-Team: <debian-l10n-chinese@lists.debian.org>\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+"PO-Revision-Date: 2018-08-17 14:52+0800\n"
+"X-Generator: Gtranslator 2.91.7\n"
+
+msgid "Advanced Configuration"
+msgstr "高階配置"
+
+msgid "Basic Configuration"
+msgstr "基本配置"
+
+msgid "Blacklisted Domain URLs"
+msgstr "列入黑名單的域名 URL"
+
+msgid "Blacklisted Domains"
+msgstr "列入黑名單的域名"
+
+msgid "Blacklisted Hosts URLs"
+msgstr "列入黑名單的主機 URL"
+
+msgid "Configuration"
+msgstr "配置"
+
+msgid "Controls system log and console output verbosity"
+msgstr "控制系統日誌和控制檯輸出的詳細程度"
+
+msgid "Delay (in seconds) for on-boot start"
+msgstr "開機啟動延遲（秒）"
+
+msgid "Disable Debugging"
+msgstr "禁用除錯"
+
+msgid "Download time-out (in seconds)"
+msgstr "下載超時（秒）"
+
+msgid "Enable Debugging"
+msgstr "啟用除錯"
+
+msgid "Enable/Start"
+msgstr "啟用/啟動"
+
+msgid "Enables debug output to /tmp/simple-adblock.log"
+msgstr "啟用到 /tmp/simple-adblock.log 的除錯輸出"
+
+msgid "Force Router DNS"
+msgstr "強制路由器 DNS"
+
+msgid "Force Router DNS server to all local devices"
+msgstr "強制路由器 DNS 服務所有本地裝置"
+
+msgid "Forces Router DNS use on local devices, also known as DNS Hijacking"
+msgstr "強制路由器 DNS 在本地裝置上使用，也稱為 DNS 劫持"
+
+msgid "Individual domains to be blacklisted"
+msgstr "要列入黑名單的單獨域名"
+
+msgid "Individual domains to be whitelisted"
+msgstr "要列入白名單的單獨域名"
+
+msgid "LED to indicate status"
+msgstr "LED 指示狀態"
+
+msgid "Let local devices use their own DNS servers if set"
+msgstr "如果設定，讓本地裝置使用自己的 DNS 伺服器"
+
+msgid "Output Verbosity Setting"
+msgstr "輸出詳細程度設定"
+
+msgid "Pick the LED not already used in"
+msgstr "選擇尚未使用的 LED"
+
+msgid "Reload"
+msgstr "重新整理"
+
+msgid "Run service after set delay on boot"
+msgstr "開機後延遲多少秒執行服務"
+
+msgid "Service Status"
+msgstr "服務狀態"
+
+msgid "Service is disabled/stopped"
+msgstr "服務已禁用/已停止"
+
+msgid "Service is enabled/started"
+msgstr "服務已啟用/已啟動"
+
+msgid "Service started with error"
+msgstr "服務啟動時出錯"
+
+msgid "Simple AdBlock"
+msgstr "簡單 AdBlock"
+
+msgid "Simple AdBlock Settings"
+msgstr "簡單 AdBlock 設定"
+
+msgid "Some output"
+msgstr "一些輸出"
+
+msgid "Stop the download if it is stalled for set number of seconds"
+msgstr "如果下載停滯設定的秒數後，則停止下載"
+
+msgid "Stop/Disable"
+msgstr "停止/禁用"
+
+msgid "Suppress output"
+msgstr "抑制輸出"
+
+msgid "System LED Configuration"
+msgstr "系統 LED 配置"
+
+msgid "URLs to lists of domains to be blacklisted"
+msgstr "黑名單域名列表的 URL"
+
+msgid "URLs to lists of domains to be whitelisted"
+msgstr "白名單域名列表的 URL"
+
+msgid "URLs to lists of hosts to be blacklisted"
+msgstr "黑名單主機列表的 URL"
+
+msgid "Verbose output"
+msgstr "詳細輸出"
+
+msgid "Whitelist and Blocklist Management"
+msgstr "白名單和黑名單管理"
+
+msgid "Whitelisted Domain URLs"
+msgstr "白名單域名 URL"
+
+msgid "Whitelisted Domains"
+msgstr "白名單域名"
+
+msgid "none"
+msgstr "無"
--- /dev/null
+#
+# Yangfl <mmyangfl@gmail.com>, 2018.
+#
+msgid ""
+msgstr ""
+"Content-Type: text/plain; charset=UTF-8\n"
+"Last-Translator: Yangfl <mmyangfl@gmail.com>\n"
+"Language-Team: <debian-l10n-chinese@lists.debian.org>\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+"PO-Revision-Date: 2018-08-17 17:06+0800\n"
+"X-Generator: Gtranslator 2.91.7\n"
+
+msgid "Add Uplink"
+msgstr "添加上行连接"
+
+msgid "Add Wireless Uplink Configuration"
+msgstr "添加无线上行连接配置"
+
+msgid ""
+"Additional trigger delay in seconds before travelmate processing begins."
+msgstr "在 travelmate 处理开始前的额外触发延迟（秒）。"
+
+msgid "Advanced"
+msgstr "高级"
+
+msgid "Authentication"
+msgstr "认证"
+
+msgid "Automatic"
+msgstr "自动"
+
+msgid "BSSID"
+msgstr "BSSID"
+
+msgid "Back to overview"
+msgstr "返回概述"
+
+msgid "Captive Portal Detection"
+msgstr "强制门户检测"
+
+msgid ""
+"Check the internet availability, log captive portal redirections and keep "
+"the uplink connection 'alive'."
+msgstr "检查互联网可用性，记录强制网络门户重定向，并保持上行连接为“活动”状态。"
+
+msgid "Cipher"
+msgstr "密码"
+
+msgid ""
+"Configuration of the travelmate package to to enable travel router "
+"functionality."
+msgstr "配置 travelmate 包，以启用旅行路由器功能。"
+
+msgid ""
+"Connect your Android or iOS devices to your router's WiFi using the shown QR "
+"code."
+msgstr "使用显示的 QR 码，将您的 Android 或 iOS 设备连接到路由器 WiFi。"
+
+msgid "Connection Limit"
+msgstr "连接限制"
+
+msgid "Create Uplink interface"
+msgstr "创建上行连接界面"
+
+msgid ""
+"Create a new wireless wan uplink interface, configure it to use dhcp and"
+msgstr "创建一个新的无线 wan 上行接口，将其配置为使用 dhcp 及"
+
+msgid "Delete"
+msgstr "删除"
+
+msgid "Delete this Uplink"
+msgstr "删除此上行连接"
+
+msgid "Device"
+msgstr "设备"
+
+msgid "Down"
+msgstr "下"
+
+msgid "EAP-Method"
+msgstr "EAP-方法"
+
+msgid "Edit"
+msgstr "编辑"
+
+msgid "Edit Firewall Configuration"
+msgstr "编辑防火墙配置"
+
+msgid "Edit Network Configuration"
+msgstr "编辑网络配置"
+
+msgid "Edit Travelmate Configuration"
+msgstr "编辑 Travelmate 配置"
+
+msgid "Edit Wireless Configuration"
+msgstr "编辑无线配置"
+
+msgid "Edit Wireless Uplink Configuration"
+msgstr "编辑无线上行连接配置"
+
+msgid "Edit this Uplink"
+msgstr "编辑此上行连接"
+
+msgid "Enable travelmate"
+msgstr "启用 travelmate"
+
+msgid "Enable verbose debug logging"
+msgstr "启用详细调试日志"
+
+msgid "Encryption"
+msgstr "加密"
+
+msgid "Extra options"
+msgstr "额外选项"
+
+msgid "Find and join network on"
+msgstr "查找并加入网络"
+
+msgid ""
+"For further information <a href=\"%s\" target=\"_blank\">see online "
+"documentation</a>"
+msgstr "有关详细信息，请<a href=\"%s\" target=\"_blank\">查看在线文档</a>"
+
+msgid "Force CCMP (AES)"
+msgstr "强制 CCMP（AES）"
+
+msgid "Force TKIP"
+msgstr "强制 TKIP"
+
+msgid "Force TKIP and CCMP (AES)"
+msgstr "强制 TKIP 和 CCMP（AES）"
+
+msgid ""
+"Here you'll find the QR codes from all of your configured Access Points. It "
+"allows you to connect your Android or iOS devices to your router's WiFi "
+"using the QR code shown below."
+msgstr ""
+"在这里，您可以找到所有已配置的接入点的 QR 码。您可以使用下面显示的 QR 码，使 "
+"Android 或 iOS 设备连接到路由器 WiFi。"
+
+msgid ""
+"How long should travelmate wait for a successful wlan uplink connection."
+msgstr "travelmate 等待 wlan 上行连接成功最长时间。"
+
+msgid "Identity"
+msgstr "身份"
+
+msgid "Ignore BSSID"
+msgstr "忽略 BSSID"
+
+msgid "Input file not found, please check your configuration."
+msgstr "未找到输入文件，请检查您的配置。"
+
+msgid "Interface Timeout"
+msgstr "接口超时"
+
+msgid "Interface Wizard"
+msgstr "接口向导"
+
+msgid "Last rundate"
+msgstr "最后运行时间"
+
+msgid ""
+"Minimum signal quality threshold as percent for conditional uplink (dis-) "
+"connections."
+msgstr "最小信号质量阈值（百分比），作为（断开）连接上行的条件。"
+
+msgid "Move down"
+msgstr "下移"
+
+msgid "Move up"
+msgstr "上移"
+
+msgid "Name of the used uplink interface."
+msgstr "要使用的上行连接接口名称。"
+
+msgid "Open"
+msgstr "开"
+
+msgid ""
+"Options for further tweaking in case the defaults are not suitable for you."
+msgstr "如果默认值不适合您，可以选择进一步调整。"
+
+msgid "Overall Timeout"
+msgstr "总体超时"
+
+msgid "Overall retry timeout in seconds."
+msgstr "总体重试超时（秒）。"
+
+msgid "Overview"
+msgstr "概述"
+
+msgid "Passphrase"
+msgstr "密码"
+
+msgid "Password"
+msgstr "密码"
+
+msgid "Password of Private Key"
+msgstr "私钥密码"
+
+msgid "Path to CA-Certificate"
+msgstr "CA 证书路径"
+
+msgid "Path to Client-Certificate"
+msgstr "客户证书路径"
+
+msgid "Path to Private Key"
+msgstr "私钥路径"
+
+msgid ""
+"Provides an overview of all configured uplinks for the travelmate interface "
+"(%s). You can edit, delete or re-order existing uplinks or scan for a new "
+"one. The currently used uplink is emphasized in blue."
+msgstr ""
+"此处显示 travelmate 接口（%s）所有已配置上行连接的概述。您可以编辑、删除或重"
+"新排序现有连接，或扫描新上行连接。当前使用的上行连接以蓝色突出显示。"
+
+msgid "QR-Codes"
+msgstr "QR 码"
+
+msgid "Radio selection"
+msgstr "无线选择"
+
+msgid "Repeat scan"
+msgstr "重新扫描"
+
+msgid "Restrict travelmate to a dedicated radio, e.g. 'radio0'."
+msgstr "将 travelmate 限制在专用无线电中，如“radio0”。"
+
+msgid "Retry limit to connect to an uplink."
+msgstr "连接到上行连接的重试限制。"
+
+msgid "Runtime Information"
+msgstr "运行信息"
+
+msgid "SSID"
+msgstr "SSID"
+
+msgid "SSID (hidden)"
+msgstr "SSID（隐藏）"
+
+msgid "Save"
+msgstr "保存"
+
+msgid "Scan"
+msgstr "扫描"
+
+msgid "Signal Quality Threshold"
+msgstr "信号质量阈值"
+
+msgid "Signal strength"
+msgstr "信号强度"
+
+msgid "Station ID (SSID/BSSID)"
+msgstr "站点 ID（SSID/BSSID）"
+
+msgid "Station Interface"
+msgstr "站点接口"
+
+msgid "Station Radio"
+msgstr "站点无线"
+
+msgid ""
+"The BSSID information '%s' is optional and only required for hidden networks"
+msgstr "BSSID 信息“%s”是可选的，仅对隐藏网络必需"
+
+msgid ""
+"This form allows you to modify the content of the main firewall "
+"configuration file (/etc/config/firewall)."
+msgstr "此表单允许您修改主防火墙配置文件（/etc/config/firewall）的内容。"
+
+msgid ""
+"This form allows you to modify the content of the main network configuration "
+"file (/etc/config/network)."
+msgstr "此表单允许您修改主网络配置文件（/etc/config/network）的内容。"
+
+msgid ""
+"This form allows you to modify the content of the main travelmate "
+"configuration file (/etc/config/travelmate)."
+msgstr "此表单允许您修改主旅行配置文件（/etc/config/travelmate）的内容。"
+
+msgid ""
+"This form allows you to modify the content of the main wireless "
+"configuration file (/etc/config/wireless)."
+msgstr "此表单允许您修改主无线配置文件（/etc/config/wireless）的内容。"
+
+msgid ""
+"This form shows the syslog output, pre-filtered for travelmate related "
+"messages only."
+msgstr "此表单显示 syslog 输出，仅针对 travelmate 相关消息进行预过滤。"
+
+msgid "This step has only to be done once."
+msgstr "此步骤只需执行一次。"
+
+msgid "Travelmate"
+msgstr "Travelmate"
+
+msgid "Travelmate Logfile"
+msgstr "Travelmate 日志文件"
+
+msgid "Travelmate Status (Quality)"
+msgstr "Travelmate 状态（质量）"
+
+msgid "Travelmate Version"
+msgstr "Travelmate 版本"
+
+msgid "Trigger Delay"
+msgstr "触发延迟"
+
+msgid "Unknown"
+msgstr "未知"
+
+msgid "Up"
+msgstr "上"
+
+msgid "Uplink / Trigger interface"
+msgstr "上行 / 触发接口"
+
+msgid "Uplink BSSID"
+msgstr "上行 BSSID"
+
+msgid "Uplink SSID"
+msgstr "上行 SSID"
+
+msgid "View AP QR-Codes"
+msgstr "查看 AP QR 码"
+
+msgid "View Logfile"
+msgstr "查看日志文件"
+
+msgid "WEP"
+msgstr "WEP"
+
+msgid "WEP-Passphrase"
+msgstr "WEP-口令"
+
+msgid "WPA"
+msgstr "WPA"
+
+msgid "WPA-Passphrase"
+msgstr "WPA-口令"
+
+msgid "WPA/WPA2"
+msgstr "WPA/WPA2"
+
+msgid "WPA2"
+msgstr "WPA2"
+
+msgid "Wireless Scan"
+msgstr "无线扫描"
+
+msgid "Wireless Stations"
+msgstr "无线站点"
+
+msgid "add it to the wan zone of the firewall.<br />"
+msgstr "将其添加到防火墙的 wan 区域。<br />"
+
+msgid "hidden"
+msgstr "隐藏"
+
+msgid "n/a"
+msgstr "n/a"
--- /dev/null
+#
+# Yangfl <mmyangfl@gmail.com>, 2018.
+#
+msgid ""
+msgstr ""
+"Content-Type: text/plain; charset=UTF-8\n"
+"Last-Translator: Yangfl <mmyangfl@gmail.com>\n"
+"Language-Team: <debian-l10n-chinese@lists.debian.org>\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+"PO-Revision-Date: 2018-08-17 17:06+0800\n"
+"X-Generator: Gtranslator 2.91.7\n"
+
+msgid "Add Uplink"
+msgstr "新增上行連線"
+
+msgid "Add Wireless Uplink Configuration"
+msgstr "新增無線上行連線配置"
+
+msgid ""
+"Additional trigger delay in seconds before travelmate processing begins."
+msgstr "在 travelmate 處理開始前的額外觸發延遲（秒）。"
+
+msgid "Advanced"
+msgstr "高階"
+
+msgid "Authentication"
+msgstr "認證"
+
+msgid "Automatic"
+msgstr "自動"
+
+msgid "BSSID"
+msgstr "BSSID"
+
+msgid "Back to overview"
+msgstr "返回概述"
+
+msgid "Captive Portal Detection"
+msgstr "強制門戶檢測"
+
+msgid ""
+"Check the internet availability, log captive portal redirections and keep "
+"the uplink connection 'alive'."
+msgstr "檢查網際網路可用性，記錄強制網路門戶重定向，並保持上行連線為“活動”狀態。"
+
+msgid "Cipher"
+msgstr "密碼"
+
+msgid ""
+"Configuration of the travelmate package to to enable travel router "
+"functionality."
+msgstr "配置 travelmate 包，以啟用旅行路由器功能。"
+
+msgid ""
+"Connect your Android or iOS devices to your router's WiFi using the shown QR "
+"code."
+msgstr "使用顯示的 QR 碼，將您的 Android 或 iOS 裝置連線到路由器 WiFi。"
+
+msgid "Connection Limit"
+msgstr "連線限制"
+
+msgid "Create Uplink interface"
+msgstr "建立上行連線介面"
+
+msgid ""
+"Create a new wireless wan uplink interface, configure it to use dhcp and"
+msgstr "建立一個新的無線 wan 上行介面，將其配置為使用 dhcp 及"
+
+msgid "Delete"
+msgstr "刪除"
+
+msgid "Delete this Uplink"
+msgstr "刪除此上行連線"
+
+msgid "Device"
+msgstr "裝置"
+
+msgid "Down"
+msgstr "下"
+
+msgid "EAP-Method"
+msgstr "EAP-方法"
+
+msgid "Edit"
+msgstr "編輯"
+
+msgid "Edit Firewall Configuration"
+msgstr "編輯防火牆配置"
+
+msgid "Edit Network Configuration"
+msgstr "編輯網路配置"
+
+msgid "Edit Travelmate Configuration"
+msgstr "編輯 Travelmate 配置"
+
+msgid "Edit Wireless Configuration"
+msgstr "編輯無線配置"
+
+msgid "Edit Wireless Uplink Configuration"
+msgstr "編輯無線上行連線配置"
+
+msgid "Edit this Uplink"
+msgstr "編輯此上行連線"
+
+msgid "Enable travelmate"
+msgstr "啟用 travelmate"
+
+msgid "Enable verbose debug logging"
+msgstr "啟用詳細除錯日誌"
+
+msgid "Encryption"
+msgstr "加密"
+
+msgid "Extra options"
+msgstr "額外選項"
+
+msgid "Find and join network on"
+msgstr "查詢並加入網路"
+
+msgid ""
+"For further information <a href=\"%s\" target=\"_blank\">see online "
+"documentation</a>"
+msgstr "有關詳細資訊，請<a href=\"%s\" target=\"_blank\">檢視線上文件</a>"
+
+msgid "Force CCMP (AES)"
+msgstr "強制 CCMP（AES）"
+
+msgid "Force TKIP"
+msgstr "強制 TKIP"
+
+msgid "Force TKIP and CCMP (AES)"
+msgstr "強制 TKIP 和 CCMP（AES）"
+
+msgid ""
+"Here you'll find the QR codes from all of your configured Access Points. It "
+"allows you to connect your Android or iOS devices to your router's WiFi "
+"using the QR code shown below."
+msgstr ""
+"在這裡，您可以找到所有已配置的接入點的 QR 碼。您可以使用下面顯示的 QR 碼，使 "
+"Android 或 iOS 裝置連線到路由器 WiFi。"
+
+msgid ""
+"How long should travelmate wait for a successful wlan uplink connection."
+msgstr "travelmate 等待 wlan 上行連線成功最長時間。"
+
+msgid "Identity"
+msgstr "身份"
+
+msgid "Ignore BSSID"
+msgstr "忽略 BSSID"
+
+msgid "Input file not found, please check your configuration."
+msgstr "未找到輸入檔案，請檢查您的配置。"
+
+msgid "Interface Timeout"
+msgstr "介面超時"
+
+msgid "Interface Wizard"
+msgstr "介面嚮導"
+
+msgid "Last rundate"
+msgstr "最後執行時間"
+
+msgid ""
+"Minimum signal quality threshold as percent for conditional uplink (dis-) "
+"connections."
+msgstr "最小訊號質量閾值（百分比），作為（斷開）連線上行的條件。"
+
+msgid "Move down"
+msgstr "下移"
+
+msgid "Move up"
+msgstr "上移"
+
+msgid "Name of the used uplink interface."
+msgstr "要使用的上行連線介面名稱。"
+
+msgid "Open"
+msgstr "開"
+
+msgid ""
+"Options for further tweaking in case the defaults are not suitable for you."
+msgstr "如果預設值不適合您，可以選擇進一步調整。"
+
+msgid "Overall Timeout"
+msgstr "總體超時"
+
+msgid "Overall retry timeout in seconds."
+msgstr "總體重試超時（秒）。"
+
+msgid "Overview"
+msgstr "概述"
+
+msgid "Passphrase"
+msgstr "密碼"
+
+msgid "Password"
+msgstr "密碼"
+
+msgid "Password of Private Key"
+msgstr "私鑰密碼"
+
+msgid "Path to CA-Certificate"
+msgstr "CA 證書路徑"
+
+msgid "Path to Client-Certificate"
+msgstr "客戶證書路徑"
+
+msgid "Path to Private Key"
+msgstr "私鑰路徑"
+
+msgid ""
+"Provides an overview of all configured uplinks for the travelmate interface "
+"(%s). You can edit, delete or re-order existing uplinks or scan for a new "
+"one. The currently used uplink is emphasized in blue."
+msgstr ""
+"此處顯示 travelmate 介面（%s）所有已配置上行連線的概述。您可以編輯、刪除或重"
+"新排序現有連線，或掃描新上行連線。當前使用的上行連線以藍色突出顯示。"
+
+msgid "QR-Codes"
+msgstr "QR 碼"
+
+msgid "Radio selection"
+msgstr "無線選擇"
+
+msgid "Repeat scan"
+msgstr "重新掃描"
+
+msgid "Restrict travelmate to a dedicated radio, e.g. 'radio0'."
+msgstr "將 travelmate 限制在專用無線電中，如“radio0”。"
+
+msgid "Retry limit to connect to an uplink."
+msgstr "連線到上行連線的重試限制。"
+
+msgid "Runtime Information"
+msgstr "執行資訊"
+
+msgid "SSID"
+msgstr "SSID"
+
+msgid "SSID (hidden)"
+msgstr "SSID（隱藏）"
+
+msgid "Save"
+msgstr "儲存"
+
+msgid "Scan"
+msgstr "掃描"
+
+msgid "Signal Quality Threshold"
+msgstr "訊號質量閾值"
+
+msgid "Signal strength"
+msgstr "訊號強度"
+
+msgid "Station ID (SSID/BSSID)"
+msgstr "站點 ID（SSID/BSSID）"
+
+msgid "Station Interface"
+msgstr "站點介面"
+
+msgid "Station Radio"
+msgstr "站點無線"
+
+msgid ""
+"The BSSID information '%s' is optional and only required for hidden networks"
+msgstr "BSSID 資訊“%s”是可選的，僅對隱藏網路必需"
+
+msgid ""
+"This form allows you to modify the content of the main firewall "
+"configuration file (/etc/config/firewall)."
+msgstr "此表單允許您修改主防火牆配置檔案（/etc/config/firewall）的內容。"
+
+msgid ""
+"This form allows you to modify the content of the main network configuration "
+"file (/etc/config/network)."
+msgstr "此表單允許您修改主網路配置檔案（/etc/config/network）的內容。"
+
+msgid ""
+"This form allows you to modify the content of the main travelmate "
+"configuration file (/etc/config/travelmate)."
+msgstr "此表單允許您修改主旅行配置檔案（/etc/config/travelmate）的內容。"
+
+msgid ""
+"This form allows you to modify the content of the main wireless "
+"configuration file (/etc/config/wireless)."
+msgstr "此表單允許您修改主無線配置檔案（/etc/config/wireless）的內容。"
+
+msgid ""
+"This form shows the syslog output, pre-filtered for travelmate related "
+"messages only."
+msgstr "此表單顯示 syslog 輸出，僅針對 travelmate 相關訊息進行預過濾。"
+
+msgid "This step has only to be done once."
+msgstr "此步驟只需執行一次。"
+
+msgid "Travelmate"
+msgstr "Travelmate"
+
+msgid "Travelmate Logfile"
+msgstr "Travelmate 日誌檔案"
+
+msgid "Travelmate Status (Quality)"
+msgstr "Travelmate 狀態（質量）"
+
+msgid "Travelmate Version"
+msgstr "Travelmate 版本"
+
+msgid "Trigger Delay"
+msgstr "觸發延遲"
+
+msgid "Unknown"
+msgstr "未知"
+
+msgid "Up"
+msgstr "上"
+
+msgid "Uplink / Trigger interface"
+msgstr "上行 / 觸發介面"
+
+msgid "Uplink BSSID"
+msgstr "上行 BSSID"
+
+msgid "Uplink SSID"
+msgstr "上行 SSID"
+
+msgid "View AP QR-Codes"
+msgstr "檢視 AP QR 碼"
+
+msgid "View Logfile"
+msgstr "檢視日誌檔案"
+
+msgid "WEP"
+msgstr "WEP"
+
+msgid "WEP-Passphrase"
+msgstr "WEP-口令"
+
+msgid "WPA"
+msgstr "WPA"
+
+msgid "WPA-Passphrase"
+msgstr "WPA-口令"
+
+msgid "WPA/WPA2"
+msgstr "WPA/WPA2"
+
+msgid "WPA2"
+msgstr "WPA2"
+
+msgid "Wireless Scan"
+msgstr "無線掃描"
+
+msgid "Wireless Stations"
+msgstr "無線站點"
+
+msgid "add it to the wan zone of the firewall.<br />"
+msgstr "將其新增到防火牆的 wan 區域。<br />"
+
+msgid "hidden"
+msgstr "隱藏"
+
+msgid "n/a"
+msgstr "n/a"
--- /dev/null
+#
+# Yangfl <mmyangfl@gmail.com>, 2018.
+#
+msgid ""
+msgstr ""
+"Content-Type: text/plain; charset=UTF-8\n"
+"Last-Translator: Yangfl <mmyangfl@gmail.com>\n"
+"Language-Team: <debian-l10n-chinese@lists.debian.org>\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+"PO-Revision-Date: 2018-08-17 17:20+0800\n"
+"X-Generator: Gtranslator 2.91.7\n"
+
+msgid ""
+"(/old/path=/new/path) or (just /old/path which becomes /cgi-prefix/old/path)"
+msgstr ""
+"（/old/path=/new/path）或（只写 /old/path，将变成 /cgi-prefix/old/path）"
+
+msgid "404 Error"
+msgstr "404 错误"
+
+msgid "A lightweight single-threaded HTTP(S) server"
+msgstr "轻量级单线程 HTTP(S) 服务器"
+
+msgid "Advanced Settings"
+msgstr "高级设置"
+
+msgid "Aliases"
+msgstr "别名"
+
+msgid "Base directory for files to be served"
+msgstr "基本文件提供目录"
+
+msgid "Bind to specific interface:port (by specifying interface address"
+msgstr "绑定到特定接口:端口（通过指定接口地址"
+
+msgid "CGI filetype handler"
+msgstr "CGI 文件类型处理程序"
+
+msgid "CGI is disabled if not present."
+msgstr "如果不存在，CGI 将被禁用。"
+
+msgid "Config file (e.g. for credentials for Basic Auth)"
+msgstr "配置文件（例如，基本身份验证的凭据）"
+
+msgid "Connection reuse"
+msgstr "连接重用"
+
+msgid "Country"
+msgstr "国家"
+
+msgid "Disable JSON-RPC authorization via ubus session API"
+msgstr "通过 ubus 会话 API 禁用 JSON-RPC 授权"
+
+msgid "Do not follow symlinks outside document root"
+msgstr "不要跟随符号链接到文档根目录之外"
+
+msgid "Do not generate directory listings."
+msgstr "不要生成目录列表。"
+
+msgid "Document root"
+msgstr "文档根"
+
+msgid "E.g specify with index.html and index.php when using PHP"
+msgstr "例如，使用 PHP 时可指定为 index.html 和 index.php"
+
+msgid "Embedded Lua interpreter is disabled if not present."
+msgstr "如果不存在，嵌入式 Lua 解释器将被禁用。"
+
+msgid "Enable JSON-RPC Cross-Origin Resource Support"
+msgstr "启用 JSON-RPC 跨域资源支持"
+
+msgid "For settings primarily geared to serving more than the web UI"
+msgstr "适用于主要服务于 Web UI 的设置"
+
+msgid "Full Web Server Settings"
+msgstr "完整的 Web 服务器设置"
+
+msgid "Full real path to handler for Lua scripts"
+msgstr "Lua 脚本处理程序的完整真实路径"
+
+msgid "General Settings"
+msgstr "常规设置"
+
+msgid "HTTP listeners (address:port)"
+msgstr "HTTP 监听（地址:端口）"
+
+msgid "HTTPS Certificate (DER Encoded)"
+msgstr "HTTPS 证书（DER 编码）"
+
+msgid "HTTPS Private Key (DER Encoded)"
+msgstr "HTTPS 私钥（DER 编码）"
+
+msgid "HTTPS listener (address:port)"
+msgstr "HTTPS 监听（地址:端口）"
+
+msgid "Ignore private IPs on public interface"
+msgstr "忽略公共接口上的私有 IP"
+
+msgid "Index page(s)"
+msgstr "索引页面"
+
+msgid ""
+"Interpreter to associate with file endings ('suffix=handler', e.g. '.php=/"
+"usr/bin/php-cgi')"
+msgstr "文件结尾关联的解释器（“后缀=处理程序”，例如“.php=/usr/bin/php-cgi”）"
+
+msgid "Length of key in bits"
+msgstr "密钥长度"
+
+msgid "Location"
+msgstr "位置"
+
+msgid "Maximum number of connections"
+msgstr "最大连接数"
+
+msgid "Maximum number of script requests"
+msgstr "最大脚本请求数"
+
+msgid "Maximum wait time for Lua, CGI, or ubus execution"
+msgstr "Lua、CGI 或 ubus 执行的最长等待时间"
+
+msgid "Maximum wait time for network activity"
+msgstr "网络活动的最长等待时间"
+
+msgid "Override path for ubus socket"
+msgstr "覆盖 ubus 套接字路径"
+
+msgid "Path prefix for CGI scripts"
+msgstr "CGI 脚本的路径前缀"
+
+msgid ""
+"Prevent access from private (RFC1918) IPs on an interface if it has an "
+"public IP address"
+msgstr "如果接口上具有公有 IP 地址，则阻止从接口上的私有（RFC1918）IP 地址访问"
+
+msgid "Realm for Basic Auth"
+msgstr "基本身份验证领域"
+
+msgid "Redirect all HTTP to HTTPS"
+msgstr "将所有 HTTP 重定向到 HTTPS"
+
+msgid "Remove configuration for certificate and key"
+msgstr "删除证书和密钥的配置"
+
+msgid "Remove old certificate and key"
+msgstr "删除旧证书和密钥"
+
+msgid "Server Hostname"
+msgstr "服务器主机名"
+
+msgid ""
+"Settings which are either rarely needed or which affect serving the WebUI"
+msgstr "很少需要或影响 WebUI 服务的设置"
+
+msgid "State"
+msgstr "州"
+
+msgid "TCP Keepalive"
+msgstr "TCP Keepalive"
+
+msgid "This permanently deletes the cert, key, and configuration to use same."
+msgstr "这将永久删除证书、密钥及使用它的配置。"
+
+msgid "Valid for # of Days"
+msgstr "有效天数"
+
+msgid ""
+"Virtual URL or CGI script to display on status '404 Not Found'. Must begin "
+"with '/'"
+msgstr "要在状态“404 Not Found”上显示的虚拟 URL 或 CGI 脚本。必须以“/”开头"
+
+msgid "Virtual path prefix for Lua scripts"
+msgstr "Lua 脚本的虚拟路径前缀"
+
+msgid "Virtual path prefix for ubus via JSON-RPC integration"
+msgstr "ubus 通过 JSON-RPC 集成的虚拟路径前缀"
+
+msgid "Will not use HTTP authentication if not present"
+msgstr "如果不存在，将不使用 HTTP 身份验证"
+
+msgid "a.k.a CommonName"
+msgstr "又名 CommonName"
+
+msgid "uHTTPd"
+msgstr "uHTTPd"
+
+msgid "uHTTPd Self-signed Certificate Parameters"
+msgstr "uHTTPd 自签名证书参数"
+
+msgid ""
+"uHTTPd will generate a new self-signed certificate using the configuration "
+"shown below."
+msgstr "uHTTPd 将使用下面显示的配置生成新的自签名证书。"
+
+msgid "ubus integration is disabled if not present"
+msgstr "如果不存在，则禁用 ubus 集成"
--- /dev/null
+#
+# Yangfl <mmyangfl@gmail.com>, 2018.
+#
+msgid ""
+msgstr ""
+"Content-Type: text/plain; charset=UTF-8\n"
+"Last-Translator: Yangfl <mmyangfl@gmail.com>\n"
+"Language-Team: <debian-l10n-chinese@lists.debian.org>\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+"PO-Revision-Date: 2018-08-17 17:21+0800\n"
+"X-Generator: Gtranslator 2.91.7\n"
+
+msgid ""
+"(/old/path=/new/path) or (just /old/path which becomes /cgi-prefix/old/path)"
+msgstr ""
+"（/old/path=/new/path）或（只寫 /old/path，將變成 /cgi-prefix/old/path）"
+
+msgid "404 Error"
+msgstr "404 錯誤"
+
+msgid "A lightweight single-threaded HTTP(S) server"
+msgstr "輕量級單執行緒 HTTP(S) 伺服器"
+
+msgid "Advanced Settings"
+msgstr "高階設定"
+
+msgid "Aliases"
+msgstr "別名"
+
+msgid "Base directory for files to be served"
+msgstr "基本檔案提供目錄"
+
+msgid "Bind to specific interface:port (by specifying interface address"
+msgstr "繫結到特定介面:埠（通過指定介面位址"
+
+msgid "CGI filetype handler"
+msgstr "CGI 檔案型別處理程式"
+
+msgid "CGI is disabled if not present."
+msgstr "如果不存在，CGI 將被禁用。"
+
+msgid "Config file (e.g. for credentials for Basic Auth)"
+msgstr "配置檔案（例如，基本身份驗證的憑據）"
+
+msgid "Connection reuse"
+msgstr "連線重用"
+
+msgid "Country"
+msgstr "國家"
+
+msgid "Disable JSON-RPC authorization via ubus session API"
+msgstr "通過 ubus 會話 API 禁用 JSON-RPC 授權"
+
+msgid "Do not follow symlinks outside document root"
+msgstr "不要跟隨符號連結到文件根目錄之外"
+
+msgid "Do not generate directory listings."
+msgstr "不要生成目錄列表。"
+
+msgid "Document root"
+msgstr "文件根"
+
+msgid "E.g specify with index.html and index.php when using PHP"
+msgstr "例如，使用 PHP 時可指定為 index.html 和 index.php"
+
+msgid "Embedded Lua interpreter is disabled if not present."
+msgstr "如果不存在，嵌入式 Lua 直譯器將被禁用。"
+
+msgid "Enable JSON-RPC Cross-Origin Resource Support"
+msgstr "啟用 JSON-RPC 跨域資源支援"
+
+msgid "For settings primarily geared to serving more than the web UI"
+msgstr "適用於主要服務於 Web UI 的設定"
+
+msgid "Full Web Server Settings"
+msgstr "完整的 Web 伺服器設定"
+
+msgid "Full real path to handler for Lua scripts"
+msgstr "Lua 指令碼處理程式的完整真實路徑"
+
+msgid "General Settings"
+msgstr "常規設定"
+
+msgid "HTTP listeners (address:port)"
+msgstr "HTTP 監聽（位址:埠）"
+
+msgid "HTTPS Certificate (DER Encoded)"
+msgstr "HTTPS 證書（DER 編碼）"
+
+msgid "HTTPS Private Key (DER Encoded)"
+msgstr "HTTPS 私鑰（DER 編碼）"
+
+msgid "HTTPS listener (address:port)"
+msgstr "HTTPS 監聽（位址:埠）"
+
+msgid "Ignore private IPs on public interface"
+msgstr "忽略公共介面上的私有 IP"
+
+msgid "Index page(s)"
+msgstr "索引頁面"
+
+msgid ""
+"Interpreter to associate with file endings ('suffix=handler', e.g. '.php=/"
+"usr/bin/php-cgi')"
+msgstr "檔案結尾關聯的直譯器（“字尾=處理程式”，例如“.php=/usr/bin/php-cgi”）"
+
+msgid "Length of key in bits"
+msgstr "金鑰長度"
+
+msgid "Location"
+msgstr "位置"
+
+msgid "Maximum number of connections"
+msgstr "最大連線數"
+
+msgid "Maximum number of script requests"
+msgstr "最大指令碼請求數"
+
+msgid "Maximum wait time for Lua, CGI, or ubus execution"
+msgstr "Lua、CGI 或 ubus 執行的最長等待時間"
+
+msgid "Maximum wait time for network activity"
+msgstr "網路活動的最長等待時間"
+
+msgid "Override path for ubus socket"
+msgstr "覆蓋 ubus 套接字路徑"
+
+msgid "Path prefix for CGI scripts"
+msgstr "CGI 指令碼的路徑字首"
+
+msgid ""
+"Prevent access from private (RFC1918) IPs on an interface if it has an "
+"public IP address"
+msgstr "如果介面上具有公有 IP 位址，則阻止從介面上的私有（RFC1918）IP 位址訪問"
+
+msgid "Realm for Basic Auth"
+msgstr "基本身份驗證領域"
+
+msgid "Redirect all HTTP to HTTPS"
+msgstr "將所有 HTTP 重定向到 HTTPS"
+
+msgid "Remove configuration for certificate and key"
+msgstr "刪除證書和金鑰的配置"
+
+msgid "Remove old certificate and key"
+msgstr "刪除舊證書和金鑰"
+
+msgid "Server Hostname"
+msgstr "伺服器主機名"
+
+msgid ""
+"Settings which are either rarely needed or which affect serving the WebUI"
+msgstr "很少需要或影響 WebUI 服務的設定"
+
+msgid "State"
+msgstr "州"
+
+msgid "TCP Keepalive"
+msgstr "TCP Keepalive"
+
+msgid "This permanently deletes the cert, key, and configuration to use same."
+msgstr "這將永久刪除證書、金鑰及使用它的配置。"
+
+msgid "Valid for # of Days"
+msgstr "有效天數"
+
+msgid ""
+"Virtual URL or CGI script to display on status '404 Not Found'. Must begin "
+"with '/'"
+msgstr "要在狀態“404 Not Found”上顯示的虛擬 URL 或 CGI 指令碼。必須以“/”開頭"
+
+msgid "Virtual path prefix for Lua scripts"
+msgstr "Lua 指令碼的虛擬路徑字首"
+
+msgid "Virtual path prefix for ubus via JSON-RPC integration"
+msgstr "ubus 通過 JSON-RPC 整合的虛擬路徑字首"
+
+msgid "Will not use HTTP authentication if not present"
+msgstr "如果不存在，將不使用 HTTP 身份驗證"
+
+msgid "a.k.a CommonName"
+msgstr "又名 CommonName"
+
+msgid "uHTTPd"
+msgstr "uHTTPd"
+
+msgid "uHTTPd Self-signed Certificate Parameters"
+msgstr "uHTTPd 自簽名證書引數"
+
+msgid ""
+"uHTTPd will generate a new self-signed certificate using the configuration "
+"shown below."
+msgstr "uHTTPd 將使用下面顯示的配置生成新的自簽名證書。"
+
+msgid "ubus integration is disabled if not present"
+msgstr "如果不存在，則禁用 ubus 整合"
projects / project / luci.git / commitdiff