net: marvell: Add separate config ANEG function for Marvell 88E1111

Marvell 88E1111 currently uses the generic marvell config ANEG function.
This function has a sequence accessing Page 5 and Register 31,
both of which are not defined or reserved for this PHY.
Hence this patch adds a new config ANEG function for Marvell 88E1111
without these erroneous accesses.

Signed-off-by: Harini Katakam <harinik@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 79ccc11facc38dca305d2a2406768f63da49d163..ec2c1eee64051919a7623abf160eacf4233b57de 100644 (file)
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -285,6 +285,48 @@ static int marvell_config_aneg(struct phy_device *phydev)
        return 0;
 }
 
+static int m88e1111_config_aneg(struct phy_device *phydev)
+{
+       int err;
+
+       /* The Marvell PHY has an errata which requires
+        * that certain registers get written in order
+        * to restart autonegotiation
+        */
+       err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+
+       err = marvell_set_polarity(phydev, phydev->mdix);
+       if (err < 0)
+               return err;
+
+       err = phy_write(phydev, MII_M1111_PHY_LED_CONTROL,
+                       MII_M1111_PHY_LED_DIRECT);
+       if (err < 0)
+               return err;
+
+       err = genphy_config_aneg(phydev);
+       if (err < 0)
+               return err;
+
+       if (phydev->autoneg != AUTONEG_ENABLE) {
+               int bmcr;
+
+               /* A write to speed/duplex bits (that is performed by
+                * genphy_config_aneg() call above) must be followed by
+                * a software reset. Otherwise, the write has no effect.
+                */
+               bmcr = phy_read(phydev, MII_BMCR);
+               if (bmcr < 0)
+                       return bmcr;
+
+               err = phy_write(phydev, MII_BMCR, bmcr | BMCR_RESET);
+               if (err < 0)
+                       return err;
+       }
+
+       return 0;
+}
+
 #ifdef CONFIG_OF_MDIO
 /*
  * Set and/or override some configuration registers based on the
@@ -1175,7 +1217,7 @@ static struct phy_driver marvell_drivers[] = {
                .flags = PHY_HAS_INTERRUPT,
                .probe = marvell_probe,
                .config_init = &m88e1111_config_init,
-               .config_aneg = &marvell_config_aneg,
+               .config_aneg = &m88e1111_config_aneg,
                .read_status = &marvell_read_status,
                .ack_interrupt = &marvell_ack_interrupt,
                .config_intr = &marvell_config_intr,