ixgbe_configure_tx_ring(adapter, adapter->tx_ring[i]);
}
+static void ixgbe_enable_rx_drop(struct ixgbe_adapter *adapter,
+ struct ixgbe_ring *ring)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ u8 reg_idx = ring->reg_idx;
+ u32 srrctl = IXGBE_READ_REG(hw, IXGBE_SRRCTL(reg_idx));
+
+ srrctl |= IXGBE_SRRCTL_DROP_EN;
+
+ IXGBE_WRITE_REG(hw, IXGBE_SRRCTL(reg_idx), srrctl);
+}
+
+static void ixgbe_disable_rx_drop(struct ixgbe_adapter *adapter,
+ struct ixgbe_ring *ring)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ u8 reg_idx = ring->reg_idx;
+ u32 srrctl = IXGBE_READ_REG(hw, IXGBE_SRRCTL(reg_idx));
+
+ srrctl &= ~IXGBE_SRRCTL_DROP_EN;
+
+ IXGBE_WRITE_REG(hw, IXGBE_SRRCTL(reg_idx), srrctl);
+}
+
+#ifdef CONFIG_IXGBE_DCB
+void ixgbe_set_rx_drop_en(struct ixgbe_adapter *adapter)
+#else
+static void ixgbe_set_rx_drop_en(struct ixgbe_adapter *adapter)
+#endif
+{
+ int i;
+ bool pfc_en = adapter->dcb_cfg.pfc_mode_enable;
+
+ if (adapter->ixgbe_ieee_pfc)
+ pfc_en |= !!(adapter->ixgbe_ieee_pfc->pfc_en);
+
+ /*
+ * We should set the drop enable bit if:
+ * SR-IOV is enabled
+ * or
+ * Number of Rx queues > 1 and flow control is disabled
+ *
+ * This allows us to avoid head of line blocking for security
+ * and performance reasons.
+ */
+ if (adapter->num_vfs || (adapter->num_rx_queues > 1 &&
+ !(adapter->hw.fc.current_mode & ixgbe_fc_tx_pause) && !pfc_en)) {
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ ixgbe_enable_rx_drop(adapter, adapter->rx_ring[i]);
+ } else {
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ ixgbe_disable_rx_drop(adapter, adapter->rx_ring[i]);
+ }
+}
+
#define IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT 2
static void ixgbe_configure_srrctl(struct ixgbe_adapter *adapter,
if (adapter->ixgbe_ieee_pfc)
pfc_en |= !!(adapter->ixgbe_ieee_pfc->pfc_en);
- if (link_up && !((adapter->flags & IXGBE_FLAG_DCB_ENABLED) && pfc_en))
+ if (link_up && !((adapter->flags & IXGBE_FLAG_DCB_ENABLED) && pfc_en)) {
hw->mac.ops.fc_enable(hw);
+ ixgbe_set_rx_drop_en(adapter);
+ }
if (link_up ||
time_after(jiffies, (adapter->link_check_timeout +