endif
LINUX_VERSION-4.19 = .138
-LINUX_VERSION-5.4 = .66
+LINUX_VERSION-5.4 = .67
LINUX_KERNEL_HASH-4.19.138 = d15c27d05f6c527269b75b30cc72972748e55720e7e00ad8abbaa4fe3b1d5e02
-LINUX_KERNEL_HASH-5.4.66 = ff1930376774f4c1fc884d82184b5ebea6628f0a37ed9be781c0b119c4cfdab2
+LINUX_KERNEL_HASH-5.4.67 = c175bd9c5d54c7120365d51cf235102e14d5a9a1baddd6296819839240dccaa4
remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))
sanitize_uri=$(call qstrip,$(subst @,_,$(subst :,_,$(subst .,_,$(subst -,_,$(subst /,_,$(1)))))))
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
-@@ -3053,6 +3053,7 @@ static int __spi_validate_bits_per_word(
+@@ -3058,6 +3058,7 @@ static int __spi_validate_bits_per_word(
*/
int spi_setup(struct spi_device *spi)
{
unsigned bad_bits, ugly_bits;
int status;
-@@ -3070,6 +3071,14 @@ int spi_setup(struct spi_device *spi)
+@@ -3075,6 +3076,14 @@ int spi_setup(struct spi_device *spi)
(SPI_TX_DUAL | SPI_TX_QUAD | SPI_TX_OCTAL |
SPI_RX_DUAL | SPI_RX_QUAD | SPI_RX_OCTAL)))
return -EINVAL;
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
-@@ -1787,15 +1787,6 @@ static int of_spi_parse_dt(struct spi_co
+@@ -1792,15 +1792,6 @@ static int of_spi_parse_dt(struct spi_co
}
spi->chip_select = value;
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
-@@ -3065,8 +3065,8 @@ int spi_setup(struct spi_device *spi)
+@@ -3070,8 +3070,8 @@ int spi_setup(struct spi_device *spi)
if (ctlr->use_gpio_descriptors && ctlr->cs_gpiods &&
ctlr->cs_gpiods[spi->chip_select] && !(spi->mode & SPI_CS_HIGH)) {
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
-@@ -665,6 +665,10 @@ int ehci_setup(struct usb_hcd *hcd)
+@@ -666,6 +666,10 @@ int ehci_setup(struct usb_hcd *hcd)
/* cache this readonly data; minimize chip reads */
ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
-@@ -1157,6 +1157,10 @@ config SYNC_R4K
+@@ -1158,6 +1158,10 @@ config SYNC_R4K
config MIPS_MACHINE
def_bool n
--- a/include/net/netfilter/nf_flow_table.h
+++ b/include/net/netfilter/nf_flow_table.h
-@@ -158,6 +158,8 @@ struct nf_flow_table_hw {
+@@ -160,6 +160,8 @@ struct nf_flow_table_hw {
int nf_flow_table_hw_register(const struct nf_flow_table_hw *offload);
void nf_flow_table_hw_unregister(const struct nf_flow_table_hw *offload);
+#endif /* _XT_FLOWOFFLOAD_H */
--- a/include/net/netfilter/nf_flow_table.h
+++ b/include/net/netfilter/nf_flow_table.h
-@@ -128,6 +128,10 @@ static inline void flow_offload_dead(str
+@@ -130,6 +130,10 @@ static inline void flow_offload_dead(str
flow->flags |= FLOW_OFFLOAD_DYING;
}
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
-@@ -638,7 +638,7 @@ static int ehci_run (struct usb_hcd *hcd
+@@ -639,7 +639,7 @@ static int ehci_run (struct usb_hcd *hcd
"USB %x.%x started, EHCI %x.%02x%s\n",
((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f),
temp >> 8, temp & 0xff,
&ehci->regs->intr_enable); /* Turn On Interrupts */
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
-@@ -641,7 +641,7 @@ ehci_hub_status_data (struct usb_hcd *hc
+@@ -640,7 +640,7 @@ ehci_hub_status_data (struct usb_hcd *hc
* always set, seem to clear PORT_OCC and PORT_CSC when writing to
* PORT_POWER; that's surprising, but maybe within-spec.
*/
mask = PORT_CSC | PORT_PEC | PORT_OCC;
else
mask = PORT_CSC | PORT_PEC;
-@@ -1011,7 +1011,7 @@ int ehci_hub_control(
+@@ -1010,7 +1010,7 @@ int ehci_hub_control(
if (temp & PORT_PEC)
status |= USB_PORT_STAT_C_ENABLE << 16;
---
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
-@@ -1067,9 +1067,6 @@ config FW_ARC
+@@ -1068,9 +1068,6 @@ config FW_ARC
config ARCH_MAY_HAVE_PC_FDC
bool
config CEVT_BCM1480
bool
-@@ -3041,6 +3038,18 @@ choice
+@@ -3042,6 +3039,18 @@ choice
bool "Extend builtin kernel arguments with bootloader arguments"
endchoice
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
-@@ -2376,6 +2376,12 @@ config MIPS_VPE_LOADER
+@@ -2377,6 +2377,12 @@ config MIPS_VPE_LOADER
Includes a loader for loading an elf relocatable object
onto another VPE and running it.
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
-@@ -80,7 +80,7 @@ module_param (log2_irq_thresh, int, S_IR
+@@ -81,7 +81,7 @@ module_param (log2_irq_thresh, int, S_IR
MODULE_PARM_DESC (log2_irq_thresh, "log2 IRQ latency, 1-64 microframes");
/* initial park setting: slower than hw default */
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
-@@ -1232,6 +1232,10 @@ static const struct hc_driver ehci_hc_dr
+@@ -1233,6 +1233,10 @@ static const struct hc_driver ehci_hc_dr
* device support
*/
.free_dev = ehci_remove_device,
void ehci_init_driver(struct hc_driver *drv,
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
-@@ -725,145 +725,6 @@ ehci_hub_descriptor (
+@@ -724,145 +724,6 @@ ehci_hub_descriptor (
}
/*-------------------------------------------------------------------------*/
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
-@@ -1797,13 +1797,8 @@ static int of_spi_parse_dt(struct spi_co
+@@ -1802,13 +1802,8 @@ static int of_spi_parse_dt(struct spi_co
spi->mode |= SPI_CS_HIGH;
/* Device speed */
arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 1 +
1 file changed, 1 insertion(+)
-diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
-index 2b760f90f38c..5375c6699843 100644
--- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
-@@ -192,6 +192,7 @@ port@6 {
+@@ -193,6 +193,7 @@
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
---
-2.25.1