entrypoint-$(CONFIG_BAMBOO) := 0x01000000
extra.o-$(CONFIG_BAMBOO) := pibs.o
+ zimage-$(CONFIG_BUBINGA) := zImage-TREE
+zimageinitrd-$(CONFIG_BUBINGA) := zImage.initrd-TREE
+ end-$(CONFIG_BUBINGA) := bubinga
+ entrypoint-$(CONFIG_BUBINGA) := 0x01000000
+ extra.o-$(CONFIG_BUBINGA) := openbios.o
+
zimage-$(CONFIG_EBONY) := zImage-TREE
zimageinitrd-$(CONFIG_EBONY) := zImage.initrd-TREE
end-$(CONFIG_EBONY) := ebony
entrypoint-$(CONFIG_OCOTEA) := 0x01000000
extra.o-$(CONFIG_OCOTEA) := pibs.o
+ zimage-$(CONFIG_SYCAMORE) := zImage-TREE
+zimageinitrd-$(CONFIG_SYCAMORE) := zImage.initrd-TREE
+ end-$(CONFIG_SYCAMORE) := sycamore
+ entrypoint-$(CONFIG_SYCAMORE) := 0x01000000
+ extra.o-$(CONFIG_SYCAMORE) := openbios.o
+
+ zimage-$(CONFIG_WALNUT) := zImage-TREE
+zimageinitrd-$(CONFIG_WALNUT) := zImage.initrd-TREE
+ end-$(CONFIG_WALNUT) := walnut
+ entrypoint-$(CONFIG_WALNUT) := 0x01000000
+ extra.o-$(CONFIG_WALNUT) := openbios.o
+
extra.o-$(CONFIG_EV64260) := misc-ev64260.o
end-$(CONFIG_EV64260) := ev64260
cacheflag-$(CONFIG_EV64260) := -include $(clear_L2_L3)
# head.o and relocate.o must be at the start.
boot-y := head.o relocate.o $(extra.o-y) $(misc-y)
-boot-$(CONFIG_40x) += embed_config.o
+boot-$(CONFIG_REDWOOD_5) += embed_config.o
+boot-$(CONFIG_REDWOOD_6) += embed_config.o
boot-$(CONFIG_8xx) += embed_config.o
boot-$(CONFIG_8260) += embed_config.o
boot-$(CONFIG_BSEIP) += iic.o
#include <asm/page.h>
#include <asm/mmu.h>
#include <asm/bootinfo.h>
-#ifdef CONFIG_44x
+#ifdef CONFIG_4xx
#include <asm/ibm4xx.h>
#endif
#include <asm/reg.h>
return 0;
}
+#if defined(CONFIG_40x)
+#define PPC4xx_EMAC0_MR0 EMAC0_BASE
+#endif
+
+#if defined(CONFIG_44x) && defined(PPC44x_EMAC0_MR0)
+#define PPC4xx_EMAC0_MR0 PPC44x_EMAC0_MR0
+#endif
+
struct bi_record *
decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum)
{
com_port = serial_init(0, NULL);
#endif
-#if defined(CONFIG_44x) && defined(PPC44x_EMAC0_MR0)
+#if defined(PPC4xx_EMAC0_MR0)
/* Reset MAL */
mtdcr(DCRN_MALCR(DCRN_MAL_BASE), MALCR_MMSR);
/* Wait for reset */
while (mfdcr(DCRN_MALCR(DCRN_MAL_BASE)) & MALCR_MMSR) {};
/* Reset EMAC */
- *(volatile unsigned long *)PPC44x_EMAC0_MR0 = 0x20000000;
+ *(volatile unsigned long *)PPC4xx_EMAC0_MR0 = 0x20000000;
__asm__ __volatile__("eieio");
#endif
puts(" "); puthex((unsigned long)(&__ramdisk_end));puts("\n");
}
+#ifndef CONFIG_40x /* don't overwrite the 40x image located at 0x00400000! */
avail_ram = (char *)0x00400000;
+#endif
end_avail = (char *)0x00800000;
puts("avail ram: "); puthex((unsigned long)avail_ram); puts(" ");
puthex((unsigned long)end_avail); puts("\n");
/*
* arch/ppc/boot/simple/openbios.c
*
- * 2005 (c) SYSGO AG - g.jaeger@sysgo.com
+ * Copyright (c) 2005 DENX Software Engineering
+ * Stefan Roese <sr@denx.de>
+ *
+ * Based on original work by
+ * 2005 (c) SYSGO AG - g.jaeger@sysgo.com
+ *
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without
* any warranty of any kind, whether express or implied.
*
- * Derived from arch/ppc/boot/simple/pibs.c (from MontaVista)
*/
#include <linux/types.h>
#include <linux/config.h>
#include <linux/string.h>
#include <asm/ppcboot.h>
-#include <platforms/4xx/ebony.h>
+#include <asm/ibm4xx.h>
+#include <asm/reg.h>
+#ifdef CONFIG_40x
+#include <asm/io.h>
+#endif
+
+#if defined(CONFIG_BUBINGA)
+#define BOARD_INFO_VECTOR 0xFFF80B50 /* openbios 1.19 moved this vector down - armin */
+#else
+#define BOARD_INFO_VECTOR 0xFFFE0B50
+#endif
+
+#ifdef CONFIG_40x
+/* Supply a default Ethernet address for those eval boards that don't
+ * ship with one. This is an address from the MBX board I have, so
+ * it is unlikely you will find it on your network.
+ */
+static ushort def_enet_addr[] = { 0x0800, 0x3e26, 0x1559 };
+
+extern unsigned long timebase_period_ns;
+#endif /* CONFIG_40x */
extern unsigned long decompress_kernel(unsigned long load_addr, int num_words,
unsigned long cksum);
bd_t hold_resid_buf __attribute__ ((__section__ (".data.boot")));
bd_t *hold_residual = &hold_resid_buf;
+typedef struct openbios_board_info {
+ unsigned char bi_s_version[4]; /* Version of this structure */
+ unsigned char bi_r_version[30]; /* Version of the IBM ROM */
+ unsigned int bi_memsize; /* DRAM installed, in bytes */
+#ifdef CONFIG_405EP
+ unsigned char bi_enetaddr[2][6]; /* Local Ethernet MAC address */
+#else /* CONFIG_405EP */
+ unsigned char bi_enetaddr[6]; /* Local Ethernet MAC address */
+#endif /* CONFIG_405EP */
+ unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */
+ unsigned int bi_intfreq; /* Processor speed, in Hz */
+ unsigned int bi_busfreq; /* PLB Bus speed, in Hz */
+ unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */
+#ifdef CONFIG_405EP
+ unsigned int bi_opb_busfreq; /* OPB Bus speed, in Hz */
+ unsigned int bi_pllouta_freq; /* PLL OUTA speed, in Hz */
+#endif /* CONFIG_405EP */
+} openbios_bd_t;
+
void *
load_kernel(unsigned long load_addr, int num_words, unsigned long cksum,
void *ign1, void *ign2)
{
- decompress_kernel(load_addr, num_words, cksum);
+#ifdef CONFIG_40x
+ openbios_bd_t *openbios_bd = NULL;
+ openbios_bd_t *(*get_board_info)(void) =
+ (openbios_bd_t *(*)(void))(*(unsigned long *)BOARD_INFO_VECTOR);
+
+ /*
+ * On 40x platforms we not only need the MAC-addresses, but also the
+ * clocks and memsize. Now try to get all values using the OpenBIOS
+ * "get_board_info()" callback.
+ */
+ if ((openbios_bd = get_board_info()) != NULL) {
+ /*
+ * Copy bd_info from OpenBIOS struct into U-Boot struct
+ * used by kernel
+ */
+ hold_residual->bi_memsize = openbios_bd->bi_memsize;
+ hold_residual->bi_intfreq = openbios_bd->bi_intfreq;
+ hold_residual->bi_busfreq = openbios_bd->bi_busfreq;
+ hold_residual->bi_pci_busfreq = openbios_bd->bi_pci_busfreq;
+ memcpy(hold_residual->bi_pci_enetaddr, openbios_bd->bi_pci_enetaddr, 6);
+#ifdef CONFIG_405EP
+ memcpy(hold_residual->bi_enetaddr, openbios_bd->bi_enetaddr[0], 6);
+ memcpy(hold_residual->bi_enet1addr, openbios_bd->bi_enetaddr[1], 6);
+ hold_residual->bi_opbfreq = openbios_bd->bi_opb_busfreq;
+ hold_residual->bi_procfreq = openbios_bd->bi_pllouta_freq;
+#else /* CONFIG_405EP */
+ memcpy(hold_residual->bi_enetaddr, openbios_bd->bi_enetaddr, 6);
+#endif /* CONFIG_405EP */
+ } else {
+ /* Hmmm...better try to stuff some defaults.
+ */
+ hold_residual->bi_memsize = 16 * 1024 * 1024;
+ hold_residual->bi_intfreq = 200000000;
+ hold_residual->bi_busfreq = 100000000;
+ hold_residual->bi_pci_busfreq = 66666666;
+
+ /*
+ * Only supply one mac-address in this fallback
+ */
+ memcpy(hold_residual->bi_enetaddr, (void *)def_enet_addr, 6);
+#ifdef CONFIG_405EP
+ hold_residual->bi_opbfreq = 50000000;
+ hold_residual->bi_procfreq = 200000000;
+#endif /* CONFIG_405EP */
+ }
+ timebase_period_ns = 1000000000 / hold_residual->bi_intfreq;
+#endif /* CONFIG_40x */
+
+#ifdef CONFIG_440GP
/* simply copy the MAC addresses */
- memcpy(hold_residual->bi_enetaddr, (char *)EBONY_OPENBIOS_MAC_BASE, 6);
- memcpy(hold_residual->bi_enet1addr, (char *)(EBONY_OPENBIOS_MAC_BASE+EBONY_OPENBIOS_MAC_OFFSET), 6);
+ memcpy(hold_residual->bi_enetaddr, (char *)OPENBIOS_MAC_BASE, 6);
+ memcpy(hold_residual->bi_enet1addr, (char *)(OPENBIOS_MAC_BASE+OPENBIOS_MAC_OFFSET), 6);
+#endif /* CONFIG_440GP */
+
+ decompress_kernel(load_addr, num_words, cksum);
return (void *)hold_residual;
}
config IBM_OPENBIOS
bool
- depends on ASH || BUBINGA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
+ depends on ASH || REDWOOD_5 || REDWOOD_6
default y
config PPC4xx_DMA
* by 16.
*/
uart_div = (mfdcr(DCRN_CPC0_UCR_BASE) & DCRN_CPC0_UCR_U0DIV);
- uart_clock = __res.bi_pllouta_freq / uart_div;
+ uart_clock = __res.bi_procfreq / uart_div;
/* Setup serial port access */
memset(&port, 0, sizeof(port));
/*
- * Support for IBM PPC 405EP evaluation board (Bubinga).
+ * arch/ppc/platforms/4xx/bubinga.h
*
- * Author: SAW (IBM), derived from walnut.h.
- * Maintained by MontaVista Software <source@mvista.com>
+ * Bubinga board definitions
+ *
+ * Copyright (c) 2005 DENX Software Engineering
+ * Stefan Roese <sr@denx.de>
+ *
+ * Based on original work by
+ * SAW (IBM)
+ * 2003 (c) MontaVista Softare Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
*
- * 2003 (c) MontaVista Softare Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
*/
#ifdef __KERNEL__
#ifndef __BUBINGA_H__
#define __BUBINGA_H__
-/* 405EP */
+#include <linux/config.h>
#include <platforms/4xx/ibm405ep.h>
-
-#ifndef __ASSEMBLY__
-/*
- * Data structure defining board information maintained by the boot
- * ROM on IBM's evaluation board. An effort has been made to
- * keep the field names consistent with the 8xx 'bd_t' board info
- * structures.
- */
-
-typedef struct board_info {
- unsigned char bi_s_version[4]; /* Version of this structure */
- unsigned char bi_r_version[30]; /* Version of the IBM ROM */
- unsigned int bi_memsize; /* DRAM installed, in bytes */
- unsigned char bi_enetaddr[2][6]; /* Local Ethernet MAC address */ unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */
- unsigned int bi_intfreq; /* Processor speed, in Hz */
- unsigned int bi_busfreq; /* PLB Bus speed, in Hz */
- unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */
- unsigned int bi_opb_busfreq; /* OPB Bus speed, in Hz */
- unsigned int bi_pllouta_freq; /* PLL OUTA speed, in Hz */
-} bd_t;
-
-/* Some 4xx parts use a different timebase frequency from the internal clock.
-*/
-#define bi_tbfreq bi_intfreq
-
+#include <asm/ppcboot.h>
/* Memory map for the Bubinga board.
* Generic 4xx plus RTC.
*/
-extern void *bubinga_rtc_base;
#define BUBINGA_RTC_PADDR ((uint)0xf0000000)
#define BUBINGA_RTC_VADDR BUBINGA_RTC_PADDR
#define BUBINGA_RTC_SIZE ((uint)8*1024)
* for typical configurations at various CPU speeds.
* The base baud is calculated as (FWDA / EXT UART DIV / 16)
*/
-#define BASE_BAUD 0
+#define BASE_BAUD 0
-#define BUBINGA_FPGA_BASE 0xF0300000
+/* Flash */
+#define PPC40x_FPGA_BASE 0xF0300000
+#define PPC40x_FPGA_REG_OFFS 1 /* offset to flash map reg */
+#define PPC40x_FLASH_ONBD_N(x) (x & 0x02)
+#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01)
+#define PPC40x_FLASH_LOW 0xFFF00000
+#define PPC40x_FLASH_HIGH 0xFFF80000
+#define PPC40x_FLASH_SIZE 0x80000
-#define PPC4xx_MACHINE_NAME "IBM Bubinga"
+#define PPC4xx_MACHINE_NAME "IBM Bubinga"
-#endif /* !__ASSEMBLY__ */
#endif /* __BUBINGA_H__ */
#endif /* __KERNEL__ */
#define PPC44x_EMAC0_MR0 0xE0000800
/* Where to find the MAC info */
-#define EBONY_OPENBIOS_MAC_BASE 0xfffffe0c
-#define EBONY_OPENBIOS_MAC_OFFSET 0x0c
+#define OPENBIOS_MAC_BASE 0xfffffe0c
+#define OPENBIOS_MAC_OFFSET 0x0c
/* Default clock rates for Rev. B and Rev. C silicon */
#define EBONY_440GP_RB_SYSCLK 33000000
void __init
sycamore_setup_arch(void)
{
-#define SYCAMORE_PS2_BASE 0xF0100000
-#define SYCAMORE_FPGA_BASE 0xF0300000
-
void *fpga_brdc;
unsigned char fpga_brdc_data;
void *fpga_enable;
ppc4xx_setup_arch();
- ibm_ocp_set_emac(0, 1);
+ ibm_ocp_set_emac(0, 0);
kb_data = ioremap(SYCAMORE_PS2_BASE, 8);
if (!kb_data) {
kb_cs = kb_data + 1;
- fpga_status = ioremap(SYCAMORE_FPGA_BASE, 8);
+ fpga_status = ioremap(PPC40x_FPGA_BASE, 8);
if (!fpga_status) {
printk(KERN_CRIT
"sycamore_setup_arch() fpga_status ioremap failed\n");
/*
* arch/ppc/platforms/4xx/sycamore.h
*
- * Macros, definitions, and data structures specific to the IBM PowerPC
- * 405GPr "Sycamore" evaluation board.
+ * Sycamore board definitions
*
- * Author: Armin Kuster <akuster@mvista.com>
+ * Copyright (c) 2005 DENX Software Engineering
+ * Stefan Roese <sr@denx.de>
+ *
+ * Based on original work by
+ * Armin Kuster <akuster@mvista.com>
+ * 2000 (c) MontaVista, Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
*
- * 2000 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
*/
#ifdef __KERNEL__
#ifndef __ASM_SYCAMORE_H__
#define __ASM_SYCAMORE_H__
+#include <linux/config.h>
#include <platforms/4xx/ibm405gpr.h>
+#include <asm/ppcboot.h>
-#ifndef __ASSEMBLY__
-/*
- * Data structure defining board information maintained by the boot
- * ROM on IBM's "Sycamore" evaluation board. An effort has been made to
- * keep the field names consistent with the 8xx 'bd_t' board info
- * structures.
- */
-
-typedef struct board_info {
- unsigned char bi_s_version[4]; /* Version of this structure */
- unsigned char bi_r_version[30]; /* Version of the IBM ROM */
- unsigned int bi_memsize; /* DRAM installed, in bytes */
- unsigned char bi_enetaddr[6]; /* Local Ethernet MAC address */
- unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */
- unsigned int bi_intfreq; /* Processor speed, in Hz */
- unsigned int bi_busfreq; /* PLB Bus speed, in Hz */
- unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */
-} bd_t;
-
-/* Some 4xx parts use a different timebase frequency from the internal clock.
-*/
-#define bi_tbfreq bi_intfreq
-
-
-/* Memory map for the IBM "Sycamore" 405GP evaluation board.
+/* Memory map for the IBM "Sycamore" 405GPr evaluation board.
* Generic 4xx plus RTC.
*/
-extern void *sycamore_rtc_base;
#define SYCAMORE_RTC_PADDR ((uint)0xf0000000)
#define SYCAMORE_RTC_VADDR SYCAMORE_RTC_PADDR
-#define SYCAMORE_RTC_SIZE ((uint)8*1024)
+#define SYCAMORE_RTC_SIZE ((uint)8*1024)
-#ifdef CONFIG_PPC405GP_INTERNAL_CLOCK
-#define BASE_BAUD 201600
-#else
#define BASE_BAUD 691200
-#endif
-#define SYCAMORE_PS2_BASE 0xF0100000
-#define SYCAMORE_FPGA_BASE 0xF0300000
+#define SYCAMORE_PS2_BASE 0xF0100000
+
+/* Flash */
+#define PPC40x_FPGA_BASE 0xF0300000
+#define PPC40x_FPGA_REG_OFFS 5 /* offset to flash map reg */
+#define PPC40x_FLASH_ONBD_N(x) (x & 0x02)
+#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01)
+#define PPC40x_FLASH_LOW 0xFFF00000
+#define PPC40x_FLASH_HIGH 0xFFF80000
+#define PPC40x_FLASH_SIZE 0x80000
#define PPC4xx_MACHINE_NAME "IBM Sycamore"
-#endif /* !__ASSEMBLY__ */
#endif /* __ASM_SYCAMORE_H__ */
#endif /* __KERNEL__ */
kb_cs = kb_data + 1;
- fpga_status = ioremap(WALNUT_FPGA_BASE, 8);
+ fpga_status = ioremap(PPC40x_FPGA_BASE, 8);
if (!fpga_status) {
printk(KERN_CRIT
"walnut_setup_arch() fpga_status ioremap failed\n");
/*
* arch/ppc/platforms/4xx/walnut.h
*
- * Macros, definitions, and data structures specific to the IBM PowerPC
- * 405GP "Walnut" evaluation board.
+ * Walnut board definitions
*
- * Authors: Grant Erickson <grant@lcse.umn.edu>, Frank Rowand
- * <frank_rowand@mvista.com>, Debbie Chu <debbie_chu@mvista.com> or
- * source@mvista.com
+ * Copyright (c) 2005 DENX Software Engineering
+ * Stefan Roese <sr@denx.de>
*
- * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
+ * Based on original work by
+ * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
+ * Frank Rowand <frank_rowand@mvista.com>
+ * Debbie Chu <debbie_chu@mvista.com>
+ * 2000 (c) MontaVista, Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
*
- * 2000 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
*/
#ifdef __KERNEL__
#ifndef __ASM_WALNUT_H__
#define __ASM_WALNUT_H__
-/* We have a 405GP core */
+#include <linux/config.h>
#include <platforms/4xx/ibm405gp.h>
-
-#ifndef __ASSEMBLY__
-/*
- * Data structure defining board information maintained by the boot
- * ROM on IBM's "Walnut" evaluation board. An effort has been made to
- * keep the field names consistent with the 8xx 'bd_t' board info
- * structures.
- */
-
-typedef struct board_info {
- unsigned char bi_s_version[4]; /* Version of this structure */
- unsigned char bi_r_version[30]; /* Version of the IBM ROM */
- unsigned int bi_memsize; /* DRAM installed, in bytes */
- unsigned char bi_enetaddr[6]; /* Local Ethernet MAC address */
- unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */
- unsigned int bi_intfreq; /* Processor speed, in Hz */
- unsigned int bi_busfreq; /* PLB Bus speed, in Hz */
- unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */
-} bd_t;
-
-/* Some 4xx parts use a different timebase frequency from the internal clock.
-*/
-#define bi_tbfreq bi_intfreq
-
+#include <asm/ppcboot.h>
/* Memory map for the IBM "Walnut" 405GP evaluation board.
* Generic 4xx plus RTC.
*/
-extern void *walnut_rtc_base;
#define WALNUT_RTC_PADDR ((uint)0xf0000000)
#define WALNUT_RTC_VADDR WALNUT_RTC_PADDR
#define WALNUT_RTC_SIZE ((uint)8*1024)
-#ifdef CONFIG_PPC405GP_INTERNAL_CLOCK
-#define BASE_BAUD 201600
-#else
#define BASE_BAUD 691200
-#endif
#define WALNUT_PS2_BASE 0xF0100000
-#define WALNUT_FPGA_BASE 0xF0300000
+
+/* Flash */
+#define PPC40x_FPGA_BASE 0xF0300000
+#define PPC40x_FPGA_REG_OFFS 5 /* offset to flash map reg */
+#define PPC40x_FLASH_ONBD_N(x) (x & 0x02)
+#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01)
+#define PPC40x_FLASH_LOW 0xFFF00000
+#define PPC40x_FLASH_HIGH 0xFFF80000
+#define PPC40x_FLASH_SIZE 0x80000
+#define WALNUT_FPGA_BASE PPC40x_FPGA_BASE
#define PPC4xx_MACHINE_NAME "IBM Walnut"
-#endif /* !__ASSEMBLY__ */
#endif /* __ASM_WALNUT_H__ */
#endif /* __KERNEL__ */
/* Copy MAC addresses to EMAC additions */
for (i=start; i<=end; i++) {
def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, i);
- memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,
- &__res.bi_enetaddr[i],
- 6);
+ if (i == 0)
+ memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,
+ __res.bi_enetaddr, 6);
+#if defined(CONFIG_405EP) || defined(CONFIG_44x)
+ else if (i == 1)
+ memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,
+ __res.bi_enet1addr, 6);
+#endif
+#if defined(CONFIG_440GX)
+ else if (i == 2)
+ memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,
+ __res.bi_enet2addr, 6);
+ else if (i == 3)
+ memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,
+ __res.bi_enet3addr, 6);
+#endif
}
}
#endif
#if defined(CONFIG_HYMOD)
hymod_conf_t bi_hymod_conf; /* hymod configuration information */
#endif
-#if defined(CONFIG_EVB64260) || defined(CONFIG_44x) || defined(CONFIG_85xx) ||\
- defined(CONFIG_83xx)
+#if defined(CONFIG_EVB64260) || defined(CONFIG_405EP) || defined(CONFIG_44x) || \
+ defined(CONFIG_85xx) || defined(CONFIG_83xx)
/* second onboard ethernet port */
unsigned char bi_enet1addr[6];
#endif
#endif
} bd_t;
+#define bi_tbfreq bi_intfreq
+
#endif /* __ASSEMBLY__ */
#endif /* __ASM_PPCBOOT_H__ */
projects / openwrt / staging / blogic.git / commitdiff